diff --git a/plat/arm/board/fvp/fvp_bl1_measured_boot.c b/plat/arm/board/fvp/fvp_bl1_measured_boot.c
index 15ea059..8815b74 100644
--- a/plat/arm/board/fvp/fvp_bl1_measured_boot.c
+++ b/plat/arm/board/fvp/fvp_bl1_measured_boot.c
@@ -7,6 +7,7 @@
 #include <stdint.h>
 
 #include <drivers/measured_boot/event_log/event_log.h>
+#include <plat/arm/common/plat_arm.h>
 
 /* Event Log data */
 static uint8_t event_log[PLAT_ARM_EVENT_LOG_MAX_SIZE];
@@ -21,13 +22,23 @@
 
 void bl1_plat_mboot_init(void)
 {
-	event_log_init(event_log, PLAT_ARM_EVENT_LOG_MAX_SIZE, 0U);
+	event_log_init(event_log, event_log + sizeof(event_log));
+	event_log_write_header();
 }
 
 void bl1_plat_mboot_finish(void)
 {
-	/*
-	 * ToDo: populate tb_fw_config with Event Log address, its maximum size
-	 * and filled size
-	 */
+	size_t event_log_cur_size;
+
+	event_log_cur_size = event_log_get_cur_size(event_log);
+	int rc = arm_set_tb_fw_info((uintptr_t)event_log,
+				    event_log_cur_size);
+	if (rc != 0) {
+		/*
+		 * It is a fatal error because on FVP platform, BL2 software
+		 * assumes that a valid Event Log buffer exist and it will use
+		 * same Event Log buffer to append image measurements.
+		 */
+		panic();
+	}
 }
diff --git a/plat/arm/board/fvp/fvp_bl2_measured_boot.c b/plat/arm/board/fvp/fvp_bl2_measured_boot.c
index f5d829a..16e8d79 100644
--- a/plat/arm/board/fvp/fvp_bl2_measured_boot.c
+++ b/plat/arm/board/fvp/fvp_bl2_measured_boot.c
@@ -10,7 +10,7 @@
 #include <plat/arm/common/plat_arm.h>
 
 /* Event Log data */
-static uint8_t event_log[PLAT_ARM_EVENT_LOG_MAX_SIZE];
+static uint64_t event_log_base;
 
 /* FVP table with platform specific image IDs, names and PCRs */
 const event_log_metadata_t fvp_event_log_metadata[] = {
@@ -29,8 +29,33 @@
 
 void bl2_plat_mboot_init(void)
 {
-	event_log_init(event_log, event_log + sizeof(event_log));
-	event_log_write_header();
+	uint8_t *event_log_start;
+	uint8_t *event_log_finish;
+	size_t bl1_event_log_size;
+	int rc;
+
+	rc = arm_get_tb_fw_info(&event_log_base, &bl1_event_log_size);
+	if (rc != 0) {
+		ERROR("%s(): Unable to get Event Log info from TB_FW_CONFIG\n",
+		      __func__);
+		/*
+		 * It is a fatal error because on FVP platform, BL2 software
+		 * assumes that a valid Event Log buffer exist and it will use
+		 * same Event Log buffer to append image measurements.
+		 */
+		panic();
+	}
+
+	/*
+	 * BL1 and BL2 share the same Event Log buffer and that BL2 will
+	 * append its measurements after BL1's
+	 */
+	event_log_start = (uint8_t *)((uintptr_t)event_log_base +
+				      bl1_event_log_size);
+	event_log_finish = (uint8_t *)((uintptr_t)event_log_base +
+				       PLAT_ARM_EVENT_LOG_MAX_SIZE);
+
+	event_log_init((uint8_t *)event_log_start, event_log_finish);
 }
 
 void bl2_plat_mboot_finish(void)
@@ -43,11 +68,11 @@
 	/* Event Log filled size */
 	size_t event_log_cur_size;
 
-	event_log_cur_size = event_log_get_cur_size(event_log);
+	event_log_cur_size = event_log_get_cur_size((uint8_t *)event_log_base);
 
 	rc = arm_set_nt_fw_info(
 #ifdef SPD_opteed
-			    (uintptr_t)event_log,
+			    (uintptr_t)event_log_base,
 #endif
 			    event_log_cur_size, &ns_log_addr);
 	if (rc != 0) {
@@ -64,7 +89,7 @@
 	}
 
 	/* Copy Event Log to Non-secure memory */
-	(void)memcpy((void *)ns_log_addr, (const void *)event_log,
+	(void)memcpy((void *)ns_log_addr, (const void *)event_log_base,
 		     event_log_cur_size);
 
 	/* Ensure that the Event Log is visible in Non-secure memory */
@@ -72,14 +97,14 @@
 
 #if defined(SPD_tspd) || defined(SPD_spmd)
 	/* Set Event Log data in TOS_FW_CONFIG */
-	rc = arm_set_tos_fw_info((uintptr_t)event_log,
+	rc = arm_set_tos_fw_info((uintptr_t)event_log_base,
 				 event_log_cur_size);
 	if (rc != 0) {
 		ERROR("%s(): Unable to update %s_FW_CONFIG\n",
 		      __func__, "TOS");
 		panic();
 	}
-#endif
+#endif /* defined(SPD_tspd) || defined(SPD_spmd) */
 
-	dump_event_log(event_log, event_log_cur_size);
+	dump_event_log((uint8_t *)event_log_base, event_log_cur_size);
 }
diff --git a/plat/arm/common/arm_dyn_cfg_helpers.c b/plat/arm/common/arm_dyn_cfg_helpers.c
index 33f2e49..6a2a6f8 100644
--- a/plat/arm/common/arm_dyn_cfg_helpers.c
+++ b/plat/arm/common/arm_dyn_cfg_helpers.c
@@ -11,6 +11,8 @@
 #endif
 #include <common/fdt_wrappers.h>
 
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
 #include <libfdt.h>
 
 #include <plat/arm/common/arm_dyn_cfg_helpers.h>
@@ -121,8 +123,6 @@
 /*
  * Write the Event Log address and its size in the DTB.
  *
- * This function is supposed to be called only by BL2.
- *
  * Returns:
  *	0 = success
  *    < 0 = error
@@ -282,4 +282,87 @@
 	*ns_log_addr = (err < 0) ? 0UL : ns_addr;
 	return err;
 }
+
+/*
+ * This function writes the Event Log address and its size
+ * in the TB_FW_CONFIG DTB.
+ *
+ * This function is supposed to be called only by BL1.
+ *
+ * Returns:
+ *     0 = success
+ *   < 0 = error
+ */
+int arm_set_tb_fw_info(uintptr_t log_addr, size_t log_size)
+{
+	/*
+	 * Read tb_fw_config device tree for Event Log properties
+	 * and write the Event Log address and its size in the DTB
+	 */
+	const struct dyn_cfg_dtb_info_t *tb_fw_config_info;
+	uintptr_t tb_fw_cfg_dtb;
+	int err;
+
+	tb_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TB_FW_CONFIG_ID);
+	assert(tb_fw_config_info != NULL);
+
+	tb_fw_cfg_dtb = tb_fw_config_info->config_addr;
+
+	err = arm_set_event_log_info(tb_fw_cfg_dtb,
+#ifdef SPD_opteed
+				     0UL,
+#endif
+				     log_addr, log_size);
+	return err;
+}
+
+/*
+ * This function reads the Event Log address and its size
+ * properties present in TB_FW_CONFIG DTB.
+ *
+ * This function is supposed to be called only by BL2.
+ *
+ * Returns:
+ *     0 = success
+ *   < 0 = error
+ * Alongside returns Event Log address and its size.
+ */
+
+int arm_get_tb_fw_info(uint64_t *log_addr, size_t *log_size)
+{
+	/* As libfdt uses void *, we can't avoid this cast */
+	const struct dyn_cfg_dtb_info_t *tb_fw_config_info;
+	int node, rc;
+
+	tb_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TB_FW_CONFIG_ID);
+	assert(tb_fw_config_info != NULL);
+
+	void *dtb = (void *)tb_fw_config_info->config_addr;
+	const char *compatible = "arm,tpm_event_log";
+
+	/* Assert the node offset point to compatible property */
+	node = fdt_node_offset_by_compatible(dtb, -1, compatible);
+	if (node < 0) {
+		WARN("The compatible property '%s'%s", compatible,
+		     " not specified in TB_FW config.\n");
+		return node;
+	}
+
+	VERBOSE("Dyn cfg: '%s'%s", compatible, " found in the config\n");
+
+	rc = fdt_read_uint64(dtb, node, DTB_PROP_HW_LOG_ADDR, log_addr);
+	if (rc != 0) {
+		ERROR("%s%s", DTB_PROP_HW_LOG_ADDR,
+		      " not specified in TB_FW config.\n");
+		return rc;
+	}
+
+	rc = fdt_read_uint32(dtb, node, DTB_PROP_HW_LOG_SIZE, (uint32_t *)log_size);
+	if (rc != 0) {
+		ERROR("%s%s", DTB_PROP_HW_LOG_SIZE,
+		      " not specified in TB_FW config.\n");
+	}
+
+	return rc;
+}
 #endif /* MEASURED_BOOT */