hikey: drop LOAD_IMAGE v1
Since LOAD_IMAGE_V2 is always enabled in HiKey platform. Drop
LOAD_IMAGE v1 to simplify code.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
diff --git a/plat/hisilicon/hikey/hikey_bl2_setup.c b/plat/hisilicon/hikey/hikey_bl2_setup.c
index 3f5e486..810f6aa 100644
--- a/plat/hisilicon/hikey/hikey_bl2_setup.c
+++ b/plat/hisilicon/hikey/hikey_bl2_setup.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -17,11 +17,9 @@
#include <hisi_mcu.h>
#include <hisi_sram_map.h>
#include <mmio.h>
-#if LOAD_IMAGE_V2
#ifdef SPD_opteed
#include <optee_utils.h>
#endif
-#endif
#include <platform_def.h>
#include <sp804_delay_timer.h>
#include <string.h>
@@ -50,48 +48,11 @@
static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
-#if !LOAD_IMAGE_V2
-
-/*******************************************************************************
- * This structure represents the superset of information that is passed to
- * BL31, e.g. while passing control to it from BL2, bl31_params
- * and other platform specific params
- ******************************************************************************/
-typedef struct bl2_to_bl31_params_mem {
- bl31_params_t bl31_params;
- image_info_t bl31_image_info;
- image_info_t bl32_image_info;
- image_info_t bl33_image_info;
- entry_point_info_t bl33_ep_info;
- entry_point_info_t bl32_ep_info;
- entry_point_info_t bl31_ep_info;
-} bl2_to_bl31_params_mem_t;
-
-static bl2_to_bl31_params_mem_t bl31_params_mem;
-
-meminfo_t *bl2_plat_sec_mem_layout(void)
-{
- return &bl2_tzram_layout;
-}
-
-void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo)
-{
- scp_bl2_meminfo->total_base = SCP_BL2_BASE;
- scp_bl2_meminfo->total_size = SCP_BL2_SIZE;
- scp_bl2_meminfo->free_base = SCP_BL2_BASE;
- scp_bl2_meminfo->free_size = SCP_BL2_SIZE;
-}
-#endif /* LOAD_IMAGE_V2 */
-
/*******************************************************************************
* Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
* Return 0 on success, -1 otherwise.
******************************************************************************/
-#if LOAD_IMAGE_V2
int plat_hikey_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
-#else
-int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info)
-#endif
{
/* Enable MCU SRAM */
hisi_mcu_enable_sram();
@@ -161,7 +122,6 @@
}
#endif /* AARCH32 */
-#if LOAD_IMAGE_V2
int hikey_bl2_handle_post_image_load(unsigned int image_id)
{
int err = 0;
@@ -222,144 +182,6 @@
return hikey_bl2_handle_post_image_load(image_id);
}
-#else /* LOAD_IMAGE_V2 */
-
-bl31_params_t *bl2_plat_get_bl31_params(void)
-{
- bl31_params_t *bl2_to_bl31_params = NULL;
-
- /*
- * Initialise the memory for all the arguments that needs to
- * be passed to BL3-1
- */
- memset(&bl31_params_mem, 0, sizeof(bl2_to_bl31_params_mem_t));
-
- /* Assign memory for TF related information */
- bl2_to_bl31_params = &bl31_params_mem.bl31_params;
- SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
-
- /* Fill BL3-1 related information */
- bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
- VERSION_1, 0);
-
- /* Fill BL3-2 related information if it exists */
-#ifdef BL32_BASE
- bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
- VERSION_1, 0);
- bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
- VERSION_1, 0);
-#endif
-
- /* Fill BL3-3 related information */
- bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
- PARAM_EP, VERSION_1, 0);
-
- /* BL3-3 expects to receive the primary CPU MPID (through x0) */
- bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
-
- bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
- VERSION_1, 0);
-
- return bl2_to_bl31_params;
-}
-
-struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
-{
-#if DEBUG
- bl31_params_mem.bl31_ep_info.args.arg1 = HIKEY_BL31_PLAT_PARAM_VAL;
-#endif
-
- return &bl31_params_mem.bl31_ep_info;
-}
-
-void bl2_plat_set_bl31_ep_info(image_info_t *image,
- entry_point_info_t *bl31_ep_info)
-{
- SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
- bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS);
-}
-
-/*******************************************************************************
- * Before calling this function BL32 is loaded in memory and its entrypoint
- * is set by load_image. This is a placeholder for the platform to change
- * the entrypoint of BL32 and set SPSR and security state.
- * On Hikey we only set the security state of the entrypoint
- ******************************************************************************/
-#ifdef BL32_BASE
-void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
- entry_point_info_t *bl32_ep_info)
-{
- SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
- /*
- * The Secure Payload Dispatcher service is responsible for
- * setting the SPSR prior to entry into the BL32 image.
- */
- bl32_ep_info->spsr = 0;
-}
-
-/*******************************************************************************
- * Populate the extents of memory available for loading BL32
- ******************************************************************************/
-void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
-{
- /*
- * Populate the extents of memory available for loading BL32.
- */
- bl32_meminfo->total_base = BL32_BASE;
- bl32_meminfo->free_base = BL32_BASE;
- bl32_meminfo->total_size =
- (TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
- bl32_meminfo->free_size =
- (TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
-}
-#endif /* BL32_BASE */
-
-void bl2_plat_set_bl33_ep_info(image_info_t *image,
- entry_point_info_t *bl33_ep_info)
-{
- unsigned long el_status;
- unsigned int mode;
-
- /* Figure out what mode we enter the non-secure world in */
- el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
- el_status &= ID_AA64PFR0_ELX_MASK;
-
- if (el_status)
- mode = MODE_EL2;
- else
- mode = MODE_EL1;
-
- /*
- * TODO: Consider the possibility of specifying the SPSR in
- * the FIP ToC and allowing the platform to have a say as
- * well.
- */
- bl33_ep_info->spsr = SPSR_64(mode, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS);
- SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
-}
-
-void bl2_plat_flush_bl31_params(void)
-{
- flush_dcache_range((unsigned long)&bl31_params_mem,
- sizeof(bl2_to_bl31_params_mem_t));
-}
-
-void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
-{
- bl33_meminfo->total_base = DDR_BASE;
- bl33_meminfo->total_size = DDR_SIZE;
- bl33_meminfo->free_base = DDR_BASE;
- bl33_meminfo->free_size = DDR_SIZE;
-}
-#endif /* LOAD_IMAGE_V2 */
-
static void reset_dwmmc_clk(void)
{
unsigned int data;