diff --git a/plat/xilinx/versal/pm_service/pm_api_sys.c b/plat/xilinx/versal/pm_service/pm_api_sys.c
index 534d910..d39b537 100644
--- a/plat/xilinx/versal/pm_service/pm_api_sys.c
+++ b/plat/xilinx/versal/pm_service/pm_api_sys.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2019-2021, Xilinx, Inc. All rights reserved.
+ * Copyright (c) 2019-2022, Xilinx, Inc. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -25,6 +25,8 @@
 #define LOADER_MODULE_ID	0x7U
 
 #define  MODE	0x80000000U
+#define MODULE_ID_MASK		0x0000ff00
+
 /* default shutdown/reboot scope is system(2) */
 static unsigned int pm_shutdown_scope = XPM_SHUTDOWN_SUBTYPE_RST_SYSTEM;
 
@@ -73,38 +75,29 @@
 /* PM API functions */
 
 /**
- * pm_get_api_version() - Get version number of PMC PM firmware
- * @version	Returns 32-bit version number of PMC Power Management Firmware
+ * pm_handle_eemi_call() - PM call for processor to send eemi payload
  * @flag	0 - Call from secure source
  *		1 - Call from non-secure source
+ * @x0 to x5	Arguments received per SMC64 standard
+ * @result	Payload received from firmware
  *
- * @return	Returns status, either success or error+reason
+ * @return	 PM_RET_SUCCESS on success or error code
  */
-enum pm_ret_status pm_get_api_version(unsigned int *version, uint32_t flag)
+enum pm_ret_status pm_handle_eemi_call(uint32_t flag, uint32_t x0, uint32_t x1,
+				       uint32_t x2, uint32_t x3, uint32_t x4,
+				       uint32_t x5, uint64_t *result)
 {
-	uint32_t payload[PAYLOAD_ARG_CNT];
+	uint32_t payload[PAYLOAD_ARG_CNT] = {0};
+	uint32_t module_id;
 
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD1(payload, LIBPM_MODULE_ID, flag, PM_GET_API_VERSION);
-	return pm_ipi_send_sync(primary_proc, payload, version, 1);
-}
+	module_id = (x0 & MODULE_ID_MASK) >> 8;
 
-/**
- * pm_init_finalize() - Call to notify PMC PM firmware that master has power
- *			management enabled and that it has finished its
- *			initialization
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Status returned by the PMU firmware
- */
-enum pm_ret_status pm_init_finalize(uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
+	//default module id is for LIBPM
+	if (module_id == 0)
+		module_id = LIBPM_MODULE_ID;
 
-	/* Send request to the PMU */
-	PM_PACK_PAYLOAD1(payload, LIBPM_MODULE_ID, flag, PM_INIT_FINALIZE);
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
+	PM_PACK_PAYLOAD6(payload, module_id, flag, x0, x1, x2, x3, x4, x5);
+	return pm_ipi_send_sync(primary_proc, payload, (uint32_t *)result, PAYLOAD_ARG_CNT);
 }
 
 /**
@@ -235,134 +228,6 @@
 }
 
 /**
- * pm_request_device() - Request a device
- * @device_id		Device ID
- * @capabilities	Requested capabilities for the device
- * @qos			Required Quality of Service
- * @ack			Flag to specify whether acknowledge requested
- * @flag		0 - Call from secure source
- *			1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_request_device(uint32_t device_id, uint32_t capabilities,
-				     uint32_t qos, uint32_t ack, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD5(payload, LIBPM_MODULE_ID, flag, PM_REQUEST_DEVICE,
-			 device_id, capabilities, qos, ack);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_release_device() - Release a device
- * @device_id		Device ID
- * @flag		0 - Call from secure source
- *			1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_release_device(uint32_t device_id, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_RELEASE_DEVICE,
-			 device_id);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_set_requirement() - Set requirement for the device
- * @device_id		Device ID
- * @capabilities	Requested capabilities for the device
- * @latency		Requested maximum latency
- * @qos			Required Quality of Service
- * @flag		0 - Call from secure source
- *			1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_set_requirement(uint32_t device_id, uint32_t capabilities,
-				      uint32_t latency, uint32_t qos,
-				      uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD5(payload, LIBPM_MODULE_ID, flag, PM_SET_REQUIREMENT,
-			 device_id, capabilities, latency, qos);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_get_device_status() - Get device's status
- * @device_id		Device ID
- * @response		Buffer to store device status response
- * @flag		0 - Call from secure source
- *			1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_get_device_status(uint32_t device_id, uint32_t *response,
-					uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_GET_DEVICE_STATUS,
-			 device_id);
-
-	return pm_ipi_send_sync(primary_proc, payload, response, 3);
-}
-
-/**
- * pm_reset_assert() - Assert/De-assert reset
- * @reset	Reset ID
- * @assert	Assert (1) or de-assert (0)
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_reset_assert(uint32_t reset, bool assert, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD3(payload, LIBPM_MODULE_ID, flag, PM_RESET_ASSERT, reset,
-			 assert);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_reset_get_status() - Get current status of a reset line
- * @reset	Reset ID
- * @status	Returns current status of selected reset ID
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_reset_get_status(uint32_t reset, uint32_t *status,
-				       uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_RESET_ASSERT,
-			 reset);
-
-	return pm_ipi_send_sync(primary_proc, payload, status, 1);
-}
-
-/**
  * pm_get_callbackdata() - Read from IPI response buffer
  * @data - array of PAYLOAD_ARG_CNT elements
  * @flag - 0 - Call from secure source
@@ -382,294 +247,12 @@
 }
 
 /**
- * pm_pinctrl_request() - Request a pin
- * @pin		Pin ID
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_pinctrl_request(uint32_t pin, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_PINCTRL_REQUEST,
-			 pin);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_pinctrl_release() - Release a pin
- * @pin		Pin ID
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_pinctrl_release(uint32_t pin, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_PINCTRL_RELEASE,
-			 pin);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_pinctrl_set_function() - Set pin function
- * @pin		Pin ID
- * @function	Function ID
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_pinctrl_set_function(uint32_t pin, uint32_t function,
-					   uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD3(payload, LIBPM_MODULE_ID, flag,
-			 PM_PINCTRL_SET_FUNCTION, pin, function)
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_pinctrl_get_function() - Get function set on the pin
- * @pin		Pin ID
- * @function	Function set on the pin
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_pinctrl_get_function(uint32_t pin, uint32_t *function,
-					   uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag,
-			 PM_PINCTRL_SET_FUNCTION, pin);
-
-	return pm_ipi_send_sync(primary_proc, payload, function, 1);
-}
-
-/**
- * pm_pinctrl_set_pin_param() - Set configuration parameter for the pin
- * @pin		Pin ID
- * @param	Parameter ID
- * @value	Parameter value
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_pinctrl_set_pin_param(uint32_t pin, uint32_t param,
-					    uint32_t value, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD4(payload, LIBPM_MODULE_ID, flag,
-			 PM_PINCTRL_CONFIG_PARAM_SET, pin, param, value);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_pinctrl_get_pin_param() - Get configuration parameter value for the pin
- * @pin		Pin ID
- * @param	Parameter ID
- * @value	Buffer to store parameter value
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_pinctrl_get_pin_param(uint32_t pin, uint32_t param,
-					    uint32_t *value, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD3(payload, LIBPM_MODULE_ID, flag,
-			 PM_PINCTRL_CONFIG_PARAM_GET, pin, param);
-
-	return pm_ipi_send_sync(primary_proc, payload, value, 1);
-}
-
-/**
- * pm_clock_enable() - Enable the clock
- * @clk_id	Clock ID
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_clock_enable(uint32_t clk_id, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_CLOCK_ENABLE,
-			 clk_id);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_clock_disable() - Disable the clock
- * @clk_id	Clock ID
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_clock_disable(uint32_t clk_id, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_CLOCK_DISABLE,
-			 clk_id);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_clock_get_state() - Get clock status
- * @clk_id	Clock ID
- * @state:	Buffer to store clock status (1: Enabled, 0:Disabled)
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_clock_get_state(uint32_t clk_id, uint32_t *state,
-				      uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_CLOCK_GETSTATE,
-			 clk_id);
-
-	return pm_ipi_send_sync(primary_proc, payload, state, 1);
-}
-
-/**
- * pm_clock_set_divider() - Set divider for the clock
- * @clk_id	Clock ID
- * @divider	Divider value
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_clock_set_divider(uint32_t clk_id, uint32_t divider,
-					uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD3(payload, LIBPM_MODULE_ID, flag, PM_CLOCK_SETDIVIDER,
-			 clk_id, divider);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_clock_get_divider() - Get divider value for the clock
- * @clk_id	Clock ID
- * @divider:	Buffer to store clock divider value
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_clock_get_divider(uint32_t clk_id, uint32_t *divider,
-					uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_CLOCK_GETDIVIDER,
-			 clk_id);
-
-	return pm_ipi_send_sync(primary_proc, payload, divider, 1);
-}
-
-/**
- * pm_clock_set_parent() - Set parent for the clock
- * @clk_id	Clock ID
- * @parent	Parent ID
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_clock_set_parent(uint32_t clk_id, uint32_t parent,
-				       uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD3(payload, LIBPM_MODULE_ID, flag, PM_CLOCK_SETPARENT,
-			 clk_id, parent);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
- * pm_clock_get_parent() - Get parent value for the clock
- * @clk_id	Clock ID
- * @parent:	Buffer to store clock parent value
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_clock_get_parent(uint32_t clk_id, uint32_t *parent,
-				       uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_CLOCK_GETPARENT,
-			 clk_id);
-
-	return pm_ipi_send_sync(primary_proc, payload, parent, 1);
-}
-/**
- * pm_clock_get_rate() - Get the rate value for the clock
- * @clk_id	Clock ID
- * @rate:	Buffer to store clock rate value
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_clock_get_rate(uint32_t clk_id, uint32_t *clk_rate,
-				     uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag, PM_CLOCK_GETRATE,
-			 clk_id);
-
-	return pm_ipi_send_sync(primary_proc, payload, clk_rate, 2);
-}
-
-/**
  * pm_pll_set_param() - Set PLL parameter
+ *
+ * This API is deprecated and maintained here for backward compatibility.
+ * New use of this API should be avoided for versal platform.
+ * This API and its use cases will be removed for versal platform.
+ *
  * @clk_id	PLL clock ID
  * @param	PLL parameter ID
  * @value	Value to set for PLL parameter
@@ -692,6 +275,11 @@
 
 /**
  * pm_pll_get_param() - Get PLL parameter value
+ *
+ * This API is deprecated and maintained here for backward compatibility.
+ * New use of this API should be avoided for versal platform.
+ * This API and its use cases will be removed for versal platform.
+ *
  * @clk_id	PLL clock ID
  * @param	PLL parameter ID
  * @value:	Buffer to store PLL parameter value
@@ -714,6 +302,11 @@
 
 /**
  * pm_pll_set_mode() - Set PLL mode
+ *
+ * This API is deprecated and maintained here for backward compatibility.
+ * New use of this API should be avoided for versal platform.
+ * This API and its use cases will be removed for versal platform.
+ *
  * @clk_id	PLL clock ID
  * @mode	PLL mode
  * @flag	0 - Call from secure source
@@ -735,6 +328,11 @@
 
 /**
  * pm_pll_get_mode() - Get PLL mode
+ *
+ * This API is deprecated and maintained here for backward compatibility.
+ * New use of this API should be avoided for versal platform.
+ * This API and its use cases will be removed for versal platform.
+ *
  * @clk_id	PLL clock ID
  * @mode:	Buffer to store PLL mode
  * @flag	0 - Call from secure source
@@ -808,22 +406,28 @@
 }
 
 /**
-* pm_query_data() -  PM API for querying firmware data
-* @qid	The type of data to query
-* @arg1	Argument 1 to requested query data call
-* @arg2	Argument 2 to requested query data call
-* @arg3	Argument 3 to requested query data call
-* @data	Returned output data
-* @flag 0 - Call from secure source
-*	1 - Call from non-secure source
-*
-* This function returns requested data.
-*/
+ * pm_query_data() -  PM API for querying firmware data
+ *
+ * This API is deprecated and maintained here for backward compatibility.
+ * New use of this API should be avoided for versal platform.
+ * This API and its use cases will be removed for versal platform.
+ *
+ * @qid	The type of data to query
+ * @arg1	Argument 1 to requested query data call
+ * @arg2	Argument 2 to requested query data call
+ * @arg3	Argument 3 to requested query data call
+ * @data	Returned output data
+ * @flag 0 - Call from secure source
+ *	1 - Call from non-secure source
+ *
+ * @retur - 0 if success else non-zero error code of type
+ * enum pm_ret_status
+ */
 enum pm_ret_status pm_query_data(uint32_t qid, uint32_t arg1, uint32_t arg2,
 				 uint32_t arg3, uint32_t *data, uint32_t flag)
 {
 	uint32_t ret;
-	uint32_t version;
+	uint32_t version[PAYLOAD_ARG_CNT] = {0};
 	uint32_t payload[PAYLOAD_ARG_CNT];
 	uint32_t fw_api_version;
 
@@ -831,25 +435,32 @@
 	PM_PACK_PAYLOAD5(payload, LIBPM_MODULE_ID, flag, PM_QUERY_DATA, qid,
 			 arg1, arg2, arg3);
 
-	ret = pm_feature_check(PM_QUERY_DATA, &version, flag);
-	if (PM_RET_SUCCESS == ret) {
-		fw_api_version = version & 0xFFFFU;
-		if ((2U == fw_api_version) &&
-		    ((XPM_QID_CLOCK_GET_NAME == qid) ||
-		     (XPM_QID_PINCTRL_GET_FUNCTION_NAME == qid))) {
-			ret = pm_ipi_send_sync(primary_proc, payload, data, 8);
-			ret = data[0];
-			data[0] = data[1];
-			data[1] = data[2];
-			data[2] = data[3];
+	ret = pm_feature_check(PM_QUERY_DATA, &version[0], flag);
+	if (ret == PM_RET_SUCCESS) {
+		fw_api_version = version[0] & 0xFFFF;
+		if ((fw_api_version == 2U) &&
+		    ((qid == XPM_QID_CLOCK_GET_NAME) ||
+		     (qid == XPM_QID_PINCTRL_GET_FUNCTION_NAME))) {
+			ret = pm_ipi_send_sync(primary_proc, payload, data, PAYLOAD_ARG_CNT);
+			if (ret == PM_RET_SUCCESS) {
+				ret = data[0];
+				data[0] = data[1];
+				data[1] = data[2];
+				data[2] = data[3];
+			}
 		} else {
-			ret = pm_ipi_send_sync(primary_proc, payload, data, 4);
+			ret = pm_ipi_send_sync(primary_proc, payload, data, PAYLOAD_ARG_CNT);
 		}
 	}
 	return ret;
 }
 /**
  * pm_api_ioctl() -  PM IOCTL API for device control and configs
+ *
+ * This API is deprecated and maintained here for backward compatibility.
+ * New use of this API should be avoided for versal platform.
+ * This API and its use cases will be removed for versal platform.
+ *
  * @device_id	Device ID
  * @ioctl_id	ID of the requested IOCTL
  * @arg1	Argument 1 to requested IOCTL call
@@ -860,13 +471,13 @@
  *
  * This function calls IOCTL to firmware for device control and configuration.
  *
- * @return	Returns status, either success or error+reason
+ * @return	Returns status, either 0 on success or non-zero error code
+ * of type enum pm_ret_status
  */
 enum pm_ret_status pm_api_ioctl(uint32_t device_id, uint32_t ioctl_id,
 				uint32_t arg1, uint32_t arg2, uint32_t *value,
 				uint32_t flag)
 {
-	uint32_t payload[PAYLOAD_ARG_CNT];
 	enum pm_ret_status ret;
 
 	switch (ioctl_id) {
@@ -892,11 +503,7 @@
 		ret =  PM_RET_SUCCESS;
 		break;
 	default:
-		/* Send request to the PMC */
-		PM_PACK_PAYLOAD5(payload, LIBPM_MODULE_ID, flag, PM_IOCTL,
-				 device_id, ioctl_id, arg1, arg2);
-		ret =  pm_ipi_send_sync(primary_proc, payload, value, 1);
-		break;
+		return PM_RET_ERROR_NOTSUPPORTED;
 	}
 
 	return ret;
@@ -923,25 +530,6 @@
 }
 
 /**
- * pm_get_chipid() - Read silicon ID registers
- * @value       Buffer for return values. Must be large enough
- *		to hold 8 bytes.
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return      Returns silicon ID registers
- */
-enum pm_ret_status pm_get_chipid(uint32_t *value, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD1(payload, LIBPM_MODULE_ID, flag, PM_GET_CHIPID);
-
-	return pm_ipi_send_sync(primary_proc, payload, value, 2);
-}
-
-/**
  * pm_feature_check() - Returns the supported API version if supported
  * @api_id	API ID to check
  * @value	Returned supported API version
@@ -954,71 +542,32 @@
 				    uint32_t flag)
 {
 	uint32_t payload[PAYLOAD_ARG_CNT], fw_api_version;
-	enum pm_ret_status status = PM_RET_ERROR_NOFEATURE;
+	enum pm_ret_status status;
+	uint32_t module_id;
+
+	module_id = (api_id & MODULE_ID_MASK) >> 8;
+
+	/* feature check should be done only for LIBPM module
+	 * If module_id is 0, then we consider it LIBPM module as default id
+	 */
+	if ((module_id > 0) && (module_id != LIBPM_MODULE_ID)) {
+		return PM_RET_SUCCESS;
+	}
 
 	switch (api_id) {
 	case PM_GET_CALLBACK_DATA:
 	case PM_GET_TRUSTZONE_VERSION:
 	case PM_LOAD_PDI:
 		*version = (PM_API_BASE_VERSION << 16);
-		status = PM_RET_SUCCESS;
-		break;
-	case PM_GET_API_VERSION:
-	case PM_GET_DEVICE_STATUS:
-	case PM_GET_OP_CHARACTERISTIC:
-	case PM_REQ_SUSPEND:
-	case PM_SELF_SUSPEND:
-	case PM_FORCE_POWERDOWN:
-	case PM_ABORT_SUSPEND:
-	case PM_REQ_WAKEUP:
-	case PM_SET_WAKEUP_SOURCE:
-	case PM_SYSTEM_SHUTDOWN:
-	case PM_REQUEST_DEVICE:
-	case PM_RELEASE_DEVICE:
-	case PM_SET_REQUIREMENT:
-	case PM_RESET_ASSERT:
-	case PM_RESET_GET_STATUS:
-	case PM_GET_CHIPID:
-	case PM_PINCTRL_REQUEST:
-	case PM_PINCTRL_RELEASE:
-	case PM_PINCTRL_GET_FUNCTION:
-	case PM_PINCTRL_SET_FUNCTION:
-	case PM_PINCTRL_CONFIG_PARAM_GET:
-	case PM_PINCTRL_CONFIG_PARAM_SET:
-	case PM_IOCTL:
-	case PM_CLOCK_ENABLE:
-	case PM_CLOCK_DISABLE:
-	case PM_CLOCK_GETSTATE:
-	case PM_CLOCK_SETDIVIDER:
-	case PM_CLOCK_GETDIVIDER:
-	case PM_CLOCK_SETPARENT:
-	case PM_CLOCK_GETPARENT:
-	case PM_CLOCK_GETRATE:
-	case PM_PLL_SET_PARAMETER:
-	case PM_PLL_GET_PARAMETER:
-	case PM_PLL_SET_MODE:
-	case PM_PLL_GET_MODE:
-	case PM_FEATURE_CHECK:
-	case PM_INIT_FINALIZE:
-	case PM_SET_MAX_LATENCY:
-	case PM_REGISTER_NOTIFIER:
-		*version = (PM_API_BASE_VERSION << 16);
-		status = PM_RET_SUCCESS;
-		break;
+		return PM_RET_SUCCESS;
 	case PM_QUERY_DATA:
 		*version = (PM_API_QUERY_DATA_VERSION << 16);
-		status = PM_RET_SUCCESS;
 		break;
 	default:
-		*version = 0U;
-		status = PM_RET_ERROR_NOFEATURE;
+		*version = (PM_API_BASE_VERSION << 16);
 		break;
 	}
 
-	if (status != PM_RET_SUCCESS) {
-		goto done;
-	}
-
 	PM_PACK_PAYLOAD2(payload, LIBPM_MODULE_ID, flag,
 			 PM_FEATURE_CHECK, api_id);
 
@@ -1060,54 +609,6 @@
 }
 
 /**
- * pm_get_op_characteristic() - PM call to request operating characteristics
- *                              of a device
- * @device_id   Device id
- * @type        Type of the operating characteristic
- *              (power, temperature and latency)
- * @result      Returns the operating characteristic for the requested device,
- *              specified by the type
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return      Returns status, either success or error+reason
- */
-enum pm_ret_status pm_get_op_characteristic(uint32_t device_id,
-					    enum pm_opchar_type type,
-					    uint32_t *result, uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD3(payload, LIBPM_MODULE_ID, flag,
-			 PM_GET_OP_CHARACTERISTIC, device_id, type);
-	return pm_ipi_send_sync(primary_proc, payload, result, 1);
-}
-
-/**
- * pm_set_max_latency() - PM call to change in the maximum wake-up latency
- *			  requirements for a specific device currently
- *			  used by that CPU.
- * @device_id	Device ID
- * @latency	Latency value
- * @flag	0 - Call from secure source
- *		1 - Call from non-secure source
- *
- * @return	Returns status, either success or error+reason
- */
-enum pm_ret_status pm_set_max_latency(uint32_t device_id, uint32_t latency,
-				      uint32_t flag)
-{
-	uint32_t payload[PAYLOAD_ARG_CNT];
-
-	/* Send request to the PMC */
-	PM_PACK_PAYLOAD3(payload, LIBPM_MODULE_ID, flag, PM_SET_MAX_LATENCY,
-			 device_id, latency);
-
-	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
-}
-
-/**
  * pm_register_notifier() - PM call to register a subsystem to be notified
  * 			    about the device event
  * @device_id	Device ID for the Node to which the event is related
diff --git a/plat/xilinx/versal/pm_service/pm_api_sys.h b/plat/xilinx/versal/pm_service/pm_api_sys.h
index 5a92704..b44b590 100644
--- a/plat/xilinx/versal/pm_service/pm_api_sys.h
+++ b/plat/xilinx/versal/pm_service/pm_api_sys.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2019-2020, Xilinx, Inc. All rights reserved.
+ * Copyright (c) 2019-2022, Xilinx, Inc. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -14,8 +14,9 @@
  * PM API function declarations
  **********************************************************/
 
-enum pm_ret_status pm_get_api_version(unsigned int *version, uint32_t flag);
-enum pm_ret_status pm_init_finalize(uint32_t flag);
+enum pm_ret_status pm_handle_eemi_call(uint32_t flag, uint32_t x0, uint32_t x1,
+				       uint32_t x2, uint32_t x3, uint32_t x4,
+				       uint32_t x5, uint64_t *result);
 enum pm_ret_status pm_self_suspend(uint32_t nid,
 				   unsigned int latency,
 				   unsigned int state,
@@ -29,42 +30,7 @@
 				 uintptr_t address, uint8_t ack, uint32_t flag);
 enum pm_ret_status pm_set_wakeup_source(uint32_t target, uint32_t device_id,
 					uint8_t enable, uint32_t flag);
-enum pm_ret_status pm_request_device(uint32_t device_id, uint32_t capabilities,
-				     uint32_t qos, uint32_t ack, uint32_t flag);
-enum pm_ret_status pm_release_device(uint32_t device_id, uint32_t flag);
-enum pm_ret_status pm_set_requirement(uint32_t device_id, uint32_t capabilities,
-				      uint32_t latency, uint32_t qos,
-				      uint32_t flag);
-enum pm_ret_status pm_get_device_status(uint32_t device_id, uint32_t *response,
-					uint32_t flag);
-enum pm_ret_status pm_reset_assert(uint32_t reset, bool assert, uint32_t flag);
-enum pm_ret_status pm_reset_get_status(uint32_t reset, uint32_t *status,
-				       uint32_t flag);
 void pm_get_callbackdata(uint32_t *data, size_t count, uint32_t flag);
-enum pm_ret_status pm_pinctrl_request(uint32_t pin, uint32_t flag);
-enum pm_ret_status pm_pinctrl_release(uint32_t pin, uint32_t flag);
-enum pm_ret_status pm_pinctrl_set_function(uint32_t pin, uint32_t function,
-					   uint32_t flag);
-enum pm_ret_status pm_pinctrl_get_function(uint32_t pin, uint32_t *function,
-					   uint32_t flag);
-enum pm_ret_status pm_pinctrl_set_pin_param(uint32_t pin, uint32_t param,
-					    uint32_t value, uint32_t flag);
-enum pm_ret_status pm_pinctrl_get_pin_param(uint32_t pin, uint32_t param,
-					    uint32_t *value, uint32_t flag);
-enum pm_ret_status pm_clock_enable(uint32_t clk_id, uint32_t flag);
-enum pm_ret_status pm_clock_disable(uint32_t clk_id, uint32_t flag);
-enum pm_ret_status pm_clock_get_state(uint32_t clk_id, uint32_t *state,
-				      uint32_t flag);
-enum pm_ret_status pm_clock_set_divider(uint32_t clk_id, uint32_t divider,
-					uint32_t flag);
-enum pm_ret_status pm_clock_get_divider(uint32_t clk_id, uint32_t *divider,
-					uint32_t flag);
-enum pm_ret_status pm_clock_set_parent(uint32_t clk_id, uint32_t parent,
-				       uint32_t flag);
-enum pm_ret_status pm_clock_get_parent(uint32_t clk_id, uint32_t *parent,
-				       uint32_t flag);
-enum pm_ret_status pm_clock_get_rate(uint32_t clk_id, uint32_t *clk_rate,
-				     uint32_t flag);
 enum pm_ret_status pm_pll_set_param(uint32_t clk_id, uint32_t param,
 				    uint32_t value, uint32_t flag);
 enum pm_ret_status pm_pll_get_param(uint32_t clk_id, uint32_t param,
@@ -83,16 +49,10 @@
 enum pm_ret_status pm_query_data(uint32_t qid, uint32_t arg1, uint32_t arg2,
 				 uint32_t arg3, uint32_t *data, uint32_t flag);
 unsigned int pm_get_shutdown_scope(void);
-enum pm_ret_status pm_get_chipid(uint32_t *value, uint32_t flag);
 enum pm_ret_status pm_feature_check(uint32_t api_id, unsigned int *version,
 				    uint32_t flag);
 enum pm_ret_status pm_load_pdi(uint32_t src, uint32_t address_low,
 			       uint32_t address_high, uint32_t flag);
-enum pm_ret_status pm_get_op_characteristic(uint32_t device_id,
-					    enum pm_opchar_type type,
-					    uint32_t *result, uint32_t flag);
-enum pm_ret_status pm_set_max_latency(uint32_t device_id, uint32_t latency,
-				      uint32_t flag);
 enum pm_ret_status pm_register_notifier(uint32_t device_id, uint32_t event,
 					uint32_t wake, uint32_t enable,
 					uint32_t flag);
diff --git a/plat/xilinx/versal/pm_service/pm_defs.h b/plat/xilinx/versal/pm_service/pm_defs.h
index 08b46e2..8b62869 100644
--- a/plat/xilinx/versal/pm_service/pm_defs.h
+++ b/plat/xilinx/versal/pm_service/pm_defs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2019-2021, Xilinx, Inc. All rights reserved.
+ * Copyright (c) 2019-2022, Xilinx, Inc. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -42,9 +42,6 @@
 #define PM_API_QUERY_DATA_VERSION	2U
 
 /* PM API ids */
-#define PM_GET_API_VERSION		1U
-#define PM_GET_DEVICE_STATUS		3U
-#define PM_GET_OP_CHARACTERISTIC	4U
 #define PM_REGISTER_NOTIFIER		5U
 #define PM_REQ_SUSPEND			6U
 #define PM_SELF_SUSPEND			7U
@@ -53,31 +50,8 @@
 #define PM_REQ_WAKEUP			10U
 #define PM_SET_WAKEUP_SOURCE		11U
 #define PM_SYSTEM_SHUTDOWN		12U
-#define PM_REQUEST_DEVICE		13U
-#define PM_RELEASE_DEVICE		14U
-#define PM_SET_REQUIREMENT		15U
-#define PM_SET_MAX_LATENCY		16U
-#define PM_RESET_ASSERT			17U
-#define PM_RESET_GET_STATUS		18U
-#define PM_INIT_FINALIZE		21U
-#define PM_GET_CHIPID			24U
-#define	PM_PINCTRL_REQUEST		28U
-#define	PM_PINCTRL_RELEASE		29U
-#define	PM_PINCTRL_GET_FUNCTION		30U
-#define	PM_PINCTRL_SET_FUNCTION		31U
-#define	PM_PINCTRL_CONFIG_PARAM_GET	32U
-#define	PM_PINCTRL_CONFIG_PARAM_SET	33U
 #define PM_IOCTL			34U
 #define PM_QUERY_DATA			35U
-#define PM_CLOCK_ENABLE			36U
-#define PM_CLOCK_DISABLE		37U
-#define PM_CLOCK_GETSTATE		38U
-#define PM_CLOCK_SETDIVIDER		39U
-#define PM_CLOCK_GETDIVIDER		40U
-#define PM_CLOCK_SETRATE		41U
-#define PM_CLOCK_GETRATE		42U
-#define PM_CLOCK_SETPARENT		43U
-#define PM_CLOCK_GETPARENT		44U
 #define PM_PLL_SET_PARAMETER		48U
 #define PM_PLL_GET_PARAMETER		49U
 #define PM_PLL_SET_MODE			50U
diff --git a/plat/xilinx/versal/pm_service/pm_svc_main.c b/plat/xilinx/versal/pm_service/pm_svc_main.c
index b082acb..f1f3991 100644
--- a/plat/xilinx/versal/pm_service/pm_svc_main.c
+++ b/plat/xilinx/versal/pm_service/pm_svc_main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2019-2021, Xilinx, Inc. All rights reserved.
+ * Copyright (c) 2019-2022, Xilinx, Inc. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -114,49 +114,82 @@
 }
 
 /**
- * pm_smc_handler() - SMC handler for PM-API calls coming from EL1/EL2.
- * @smc_fid - Function Identifier
- * @x1 - x4 - Arguments
- * @cookie  - Unused
- * @handler - Pointer to caller's context structure
+ * eemi_for_compatibility() - EEMI calls handler for deprecated calls
  *
- * @return  - Unused
+ * @return - If EEMI API found then, uintptr_t type address, else 0
  *
- * Determines that smc_fid is valid and supported PM SMC Function ID from the
- * list of pm_api_ids, otherwise completes the request with
- * the unknown SMC Function ID
- *
- * The SMC calls for PM service are forwarded from SIP Service SMC handler
- * function with rt_svc_handle signature
+ * Some EEMI API's use case needs to be changed in Linux driver, so they
+ * can take advantage of common EEMI handler in TF-A. As of now the old
+ * implementation of these APIs are required to maintain backward compatibility
+ * until their use case in linux driver changes.
  */
-uint64_t pm_smc_handler(uint32_t smc_fid, uint64_t x1, uint64_t x2, uint64_t x3,
-			uint64_t x4, void *cookie, void *handle, uint64_t flags)
+static uintptr_t eemi_for_compatibility(uint32_t api_id, uint32_t *pm_arg,
+					void *handle, uint32_t security_flag)
 {
 	enum pm_ret_status ret;
 
-	uint32_t pm_arg[4];
-	uint32_t security_flag = SECURE_FLAG;
+	switch (api_id) {
 
-	/* Handle case where PM wasn't initialized properly */
-	if (pm_up == false) {
-		SMC_RET1(handle, SMC_UNK);
+	case PM_IOCTL:
+	{
+		uint32_t value;
+
+		ret = pm_api_ioctl(pm_arg[0], pm_arg[1], pm_arg[2],
+				   pm_arg[3], &value, security_flag);
+		if (ret == PM_RET_ERROR_NOTSUPPORTED)
+			return (uintptr_t)0;
+
+		SMC_RET1(handle, (uint64_t)ret | ((uint64_t)value) << 32);
 	}
 
-	pm_arg[0] = (uint32_t)x1;
-	pm_arg[1] = (uint32_t)(x1 >> 32);
-	pm_arg[2] = (uint32_t)x2;
-	pm_arg[3] = (uint32_t)(x2 >> 32);
+	case PM_QUERY_DATA:
+	{
+		uint32_t data[PAYLOAD_ARG_CNT] = { 0 };
 
-	/*
-	 * Mark BIT24 payload (i.e 1st bit of pm_arg[3] ) as non-secure (1)
-	 * if smc called is non secure
-	 */
-	if (is_caller_non_secure(flags) != 0) {
-		security_flag = NON_SECURE_FLAG;
+		ret = pm_query_data(pm_arg[0], pm_arg[1], pm_arg[2],
+				      pm_arg[3], data, security_flag);
+
+		SMC_RET2(handle, (uint64_t)ret  | ((uint64_t)data[0] << 32),
+				 (uint64_t)data[1] | ((uint64_t)data[2] << 32));
 	}
 
-	switch (smc_fid & FUNCID_NUM_MASK) {
-	/* PM API Functions */
+	case PM_FEATURE_CHECK:
+	{
+		uint32_t version;
+
+		ret = pm_feature_check(pm_arg[0], &version, security_flag);
+		SMC_RET1(handle, (uint64_t)ret | ((uint64_t)version << 32));
+	}
+
+	case PM_LOAD_PDI:
+	{
+		ret = pm_load_pdi(pm_arg[0], pm_arg[1], pm_arg[2],
+				  security_flag);
+		SMC_RET1(handle, (uint64_t)ret);
+	}
+
+	default:
+		return (uintptr_t)0;
+	}
+}
+
+/**
+ * eemi_psci_debugfs_handler() - EEMI API invoked from PSCI
+ *
+ * These EEMI APIs performs CPU specific power management tasks.
+ * These EEMI APIs are invoked either from PSCI or from debugfs in kernel.
+ * These calls require CPU specific processing before sending IPI request to
+ * Platform Management Controller. For example enable/disable CPU specific
+ * interrupts. This requires separate handler for these calls and may not be
+ * handled using common eemi handler
+ */
+static uintptr_t eemi_psci_debugfs_handler(uint32_t api_id, uint32_t *pm_arg,
+					   void *handle, uint32_t security_flag)
+{
+	enum pm_ret_status ret;
+
+	switch (api_id) {
+
 	case PM_SELF_SUSPEND:
 		ret = pm_self_suspend(pm_arg[0], pm_arg[1], pm_arg[2],
 				      pm_arg[3], security_flag);
@@ -179,65 +212,22 @@
 		ret = pm_system_shutdown(pm_arg[0], pm_arg[1], security_flag);
 		SMC_RET1(handle, (uint64_t)ret);
 
-	case PM_REQ_WAKEUP:
-		ret = pm_req_wakeup(pm_arg[0], pm_arg[1], pm_arg[2], pm_arg[3],
-				    security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_SET_WAKEUP_SOURCE:
-		ret = pm_set_wakeup_source(pm_arg[0], pm_arg[1], pm_arg[2],
-					   security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_REQUEST_DEVICE:
-		ret = pm_request_device(pm_arg[0], pm_arg[1], pm_arg[2],
-					pm_arg[3], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_RELEASE_DEVICE:
-		ret = pm_release_device(pm_arg[0], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_SET_REQUIREMENT:
-		ret = pm_set_requirement(pm_arg[0], pm_arg[1], pm_arg[2],
-					 pm_arg[3], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_GET_API_VERSION:
-	{
-		uint32_t api_version;
-
-		ret = pm_get_api_version(&api_version, security_flag);
-		SMC_RET1(handle, (u_register_t)PM_RET_SUCCESS |
-				 ((u_register_t)api_version << 32));
+	default:
+		return (uintptr_t)0;
 	}
+}
 
-	case PM_GET_DEVICE_STATUS:
-	{
-		uint32_t buff[3];
-
-		ret = pm_get_device_status(pm_arg[0], buff, security_flag);
-		SMC_RET2(handle, (u_register_t)ret | ((u_register_t)buff[0] << 32),
-			 (u_register_t)buff[1] | ((u_register_t)buff[2] << 32));
-	}
-
-	case PM_RESET_ASSERT:
-		ret = pm_reset_assert(pm_arg[0], pm_arg[1], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_RESET_GET_STATUS:
-	{
-		uint32_t reset_status;
-
-		ret = pm_reset_get_status(pm_arg[0], &reset_status,
-					  security_flag);
-		SMC_RET1(handle, (u_register_t)ret |
-			 ((u_register_t)reset_status << 32));
-	}
-
-	case PM_INIT_FINALIZE:
-		ret = pm_init_finalize(security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
+/**
+ * TF_A_specific_handler() - SMC handler for TF-A specific functionality
+ *
+ * These EEMI calls performs functionality that does not require
+ * IPI transaction. The handler ends in TF-A and returns requested data to
+ * kernel from TF-A
+ */
+static uintptr_t TF_A_specific_handler(uint32_t api_id, uint32_t *pm_arg,
+				       void *handle, uint32_t security_flag)
+{
+	switch (api_id) {
 
 	case PM_GET_CALLBACK_DATA:
 	{
@@ -245,192 +235,115 @@
 
 		pm_get_callbackdata(result, ARRAY_SIZE(result), security_flag);
 		SMC_RET2(handle,
-			 (u_register_t)result[0] | ((u_register_t)result[1] << 32),
-			 (u_register_t)result[2] | ((u_register_t)result[3] << 32));
-	}
-
-	case PM_PINCTRL_REQUEST:
-		ret = pm_pinctrl_request(pm_arg[0], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_PINCTRL_RELEASE:
-		ret = pm_pinctrl_release(pm_arg[0], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_PINCTRL_GET_FUNCTION:
-	{
-		uint32_t value = 0;
-
-		ret = pm_pinctrl_get_function(pm_arg[0], &value, security_flag);
-		SMC_RET1(handle, (u_register_t)ret | ((u_register_t)value) << 32);
-	}
-
-	case PM_PINCTRL_SET_FUNCTION:
-		ret = pm_pinctrl_set_function(pm_arg[0], pm_arg[1],
-					      security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_PINCTRL_CONFIG_PARAM_GET:
-	{
-		uint32_t value;
-
-		ret = pm_pinctrl_get_pin_param(pm_arg[0], pm_arg[1], &value,
-					       security_flag);
-		SMC_RET1(handle, (u_register_t)ret | ((u_register_t)value) << 32);
-	}
-
-	case PM_PINCTRL_CONFIG_PARAM_SET:
-		ret = pm_pinctrl_set_pin_param(pm_arg[0], pm_arg[1], pm_arg[2],
-					       security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_IOCTL:
-	{
-		uint32_t value;
-
-		ret = pm_api_ioctl(pm_arg[0], pm_arg[1], pm_arg[2],
-				   pm_arg[3], &value, security_flag);
-		SMC_RET1(handle, (u_register_t)ret | ((u_register_t)value) << 32);
-	}
-
-	case PM_QUERY_DATA:
-	{
-		uint32_t data[8] = { 0 };
-
-		ret = pm_query_data(pm_arg[0], pm_arg[1], pm_arg[2],
-				      pm_arg[3], data, security_flag);
-
-		SMC_RET2(handle, (u_register_t)ret  | ((u_register_t)data[0] << 32),
-				 (u_register_t)data[1] | ((u_register_t)data[2] << 32));
-
-	}
-	case PM_CLOCK_ENABLE:
-		ret = pm_clock_enable(pm_arg[0], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_CLOCK_DISABLE:
-		ret = pm_clock_disable(pm_arg[0], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_CLOCK_GETSTATE:
-	{
-		uint32_t value;
-
-		ret = pm_clock_get_state(pm_arg[0], &value, security_flag);
-		SMC_RET1(handle, (u_register_t)ret | ((u_register_t)value) << 32);
-	}
-
-	case PM_CLOCK_SETDIVIDER:
-		ret = pm_clock_set_divider(pm_arg[0], pm_arg[1], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_CLOCK_GETDIVIDER:
-	{
-		uint32_t value;
-
-		ret = pm_clock_get_divider(pm_arg[0], &value, security_flag);
-		SMC_RET1(handle, (u_register_t)ret | ((u_register_t)value) << 32);
-	}
-
-	case PM_CLOCK_SETPARENT:
-		ret = pm_clock_set_parent(pm_arg[0], pm_arg[1], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_CLOCK_GETPARENT:
-	{
-		uint32_t value;
-
-		ret = pm_clock_get_parent(pm_arg[0], &value, security_flag);
-		SMC_RET1(handle, (u_register_t)ret | ((u_register_t)value) << 32);
-	}
-
-	case PM_CLOCK_GETRATE:
-	{
-		uint32_t rate[2] = { 0 };
-
-		ret = pm_clock_get_rate(pm_arg[0], rate, security_flag);
-		SMC_RET2(handle, (u_register_t)ret | ((u_register_t)rate[0] << 32),
-			 (u_register_t)rate[1] | ((u_register_t)0U << 32));
-	}
-
-	case PM_PLL_SET_PARAMETER:
-		ret = pm_pll_set_param(pm_arg[0], pm_arg[1], pm_arg[2],
-				       security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_PLL_GET_PARAMETER:
-	{
-		uint32_t value;
-
-		ret = pm_pll_get_param(pm_arg[0], pm_arg[1], &value,
-				       security_flag);
-		SMC_RET1(handle, (u_register_t)ret | ((u_register_t)value << 32));
-	}
-
-	case PM_PLL_SET_MODE:
-		ret = pm_pll_set_mode(pm_arg[0], pm_arg[1], security_flag);
-		SMC_RET1(handle, (uint64_t)ret);
-
-	case PM_PLL_GET_MODE:
-	{
-		uint32_t mode;
-
-		ret = pm_pll_get_mode(pm_arg[0], &mode, security_flag);
-		SMC_RET1(handle, (u_register_t)ret | ((u_register_t)mode << 32));
+			(uint64_t)result[0] | ((uint64_t)result[1] << 32),
+			(uint64_t)result[2] | ((uint64_t)result[3] << 32));
 	}
 
 	case PM_GET_TRUSTZONE_VERSION:
 		SMC_RET1(handle, (uint64_t)PM_RET_SUCCESS |
 			 ((uint64_t)VERSAL_TZ_VERSION << 32));
 
-	case PM_GET_CHIPID:
-	{
-		uint32_t result[2];
-
-		ret = pm_get_chipid(result, security_flag);
-		SMC_RET2(handle, (u_register_t)ret | ((u_register_t)result[0] << 32),
-			 (u_register_t)result[1] | ((u_register_t)0U << 32));
-	}
-
-	case PM_FEATURE_CHECK:
-	{
-		uint32_t version;
-
-		ret = pm_feature_check(pm_arg[0], &version, security_flag);
-		SMC_RET1(handle, (u_register_t)ret | ((u_register_t)version << 32));
-	}
-
-	case PM_LOAD_PDI:
-	{
-		ret = pm_load_pdi(pm_arg[0], pm_arg[1], pm_arg[2],
-				  security_flag);
-		SMC_RET1(handle, (u_register_t)ret);
-	}
-
-	case PM_GET_OP_CHARACTERISTIC:
-	{
-		uint32_t result;
-
-		ret = pm_get_op_characteristic(pm_arg[0], pm_arg[1], &result,
-					       security_flag);
-		SMC_RET1(handle, (u_register_t)ret | ((u_register_t)result << 32));
-	}
-
-	case PM_SET_MAX_LATENCY:
-	{
-		ret = pm_set_max_latency(pm_arg[0], pm_arg[1], security_flag);
-		SMC_RET1(handle, (u_register_t)ret);
-	}
-
-	case PM_REGISTER_NOTIFIER:
-	{
-		ret = pm_register_notifier(pm_arg[0], pm_arg[1], pm_arg[2],
-					   pm_arg[3], security_flag);
-		SMC_RET1(handle, (u_register_t)ret);
-	}
-
 	default:
-		WARN("Unimplemented PM Service Call: 0x%x\n", smc_fid);
-		SMC_RET1(handle, SMC_UNK);
+		return (uintptr_t)0;
 	}
 }
+
+/**
+ * eemi_handler() - Prepare EEMI payload and perform IPI transaction
+ *
+ * EEMI - Embedded Energy Management Interface is Xilinx proprietary protocol
+ * to allow communication between power management controller and different
+ * processing clusters.
+ *
+ * This handler prepares EEMI protocol payload received from kernel and performs
+ * IPI transaction.
+ */
+static uintptr_t eemi_handler(uint32_t api_id, uint32_t *pm_arg,
+			      void *handle, uint32_t security_flag)
+{
+	enum pm_ret_status ret;
+	uint32_t buf[PAYLOAD_ARG_CNT] = {0};
+
+	ret = pm_handle_eemi_call(security_flag, api_id, pm_arg[0], pm_arg[1],
+				  pm_arg[2], pm_arg[3], pm_arg[4],
+				  (uint64_t *)buf);
+	/*
+	 * Two IOCTLs, to get clock name and pinctrl name of pm_query_data API
+	 * receives 5 words of respoonse from firmware. Currently linux driver can
+	 * receive only 4 words from TF-A. So, this needs to be handled separately
+	 * than other eemi calls.
+	 */
+	if (api_id == PM_QUERY_DATA) {
+		if ((pm_arg[0] == XPM_QID_CLOCK_GET_NAME ||
+		    pm_arg[0] == XPM_QID_PINCTRL_GET_FUNCTION_NAME) &&
+		    ret == PM_RET_SUCCESS) {
+			SMC_RET2(handle, (uint64_t)buf[0] | ((uint64_t)buf[1] << 32),
+				(uint64_t)buf[2] | ((uint64_t)buf[3] << 32));
+		}
+	}
+
+	SMC_RET2(handle, (uint64_t)ret | ((uint64_t)buf[0] << 32),
+		 (uint64_t)buf[1] | ((uint64_t)buf[2] << 32));
+}
+
+/**
+ * pm_smc_handler() - SMC handler for PM-API calls coming from EL1/EL2.
+ * @smc_fid - Function Identifier
+ * @x1 - x4 - SMC64 Arguments from kernel
+ *	      x3 and x4 are Unused
+ * @cookie  - Unused
+ * @handler - Pointer to caller's context structure
+ *
+ * @return  - Unused
+ *
+ * Determines that smc_fid is valid and supported PM SMC Function ID from the
+ * list of pm_api_ids, otherwise completes the request with
+ * the unknown SMC Function ID
+ *
+ * The SMC calls for PM service are forwarded from SIP Service SMC handler
+ * function with rt_svc_handle signature
+ */
+uint64_t pm_smc_handler(uint32_t smc_fid, uint64_t x1, uint64_t x2, uint64_t x3,
+			uint64_t x4, void *cookie, void *handle, uint64_t flags)
+{
+	uintptr_t ret;
+	uint32_t pm_arg[PAYLOAD_ARG_CNT] = {0};
+	uint32_t security_flag = SECURE_FLAG;
+	uint32_t api_id;
+
+	/* Handle case where PM wasn't initialized properly */
+	if (!pm_up)
+		SMC_RET1(handle, SMC_UNK);
+
+	/*
+	 * Mark BIT24 payload (i.e 1st bit of pm_arg[3] ) as non-secure (1)
+	 * if smc called is non secure
+	 */
+	if (is_caller_non_secure(flags)) {
+		security_flag = NON_SECURE_FLAG;
+	}
+
+	pm_arg[0] = (uint32_t)x1;
+	pm_arg[1] = (uint32_t)(x1 >> 32);
+	pm_arg[2] = (uint32_t)x2;
+	pm_arg[3] = (uint32_t)(x2 >> 32);
+	(void)(x3);
+	(void)(x4);
+	api_id = smc_fid & FUNCID_NUM_MASK;
+
+	ret = eemi_for_compatibility(api_id, pm_arg, handle, security_flag);
+	if (ret != (uintptr_t)0)
+		return ret;
+
+	ret = eemi_psci_debugfs_handler(api_id, pm_arg, handle, flags);
+	if (ret !=  (uintptr_t)0)
+		return ret;
+
+	ret = TF_A_specific_handler(api_id, pm_arg, handle, security_flag);
+	if (ret !=  (uintptr_t)0)
+		return ret;
+
+	ret = eemi_handler(api_id, pm_arg, handle, security_flag);
+
+	return ret;
+}