layerscape: Initial TF-A support for LS1043ardb
This patch introduce TF-A support for NXP's ls1043a platform.
more details information of ls1043a chip and ls1043ardb board
can be found at docs/plat/ls1043a.rst.
Boot sequence on ls1043a is: bootrom loads bl1 firstly, then bl1
loads bl2, bl2 will load bl31, bl32 and bl33, bl31 will boot
bl32(tee os) and bl33(u-boot or uefi), bl33 boot Linux kernel.
Now TF-A on ls1043ardb platform has the following features in this patch:
* Support boot from Nor flash.
* TF-A can boot bl33 which runs in el2 of non-secure world.
* TF-A boot OPTee OS.
* Support PSCI
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Chenyin.Ha <Chenyin.Ha@nxp.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
Signed-off-by: Wen He <wen.he_1@nxp.com>
diff --git a/plat/layerscape/common/include/ls_16550.h b/plat/layerscape/common/include/ls_16550.h
new file mode 100644
index 0000000..503a01d
--- /dev/null
+++ b/plat/layerscape/common/include/ls_16550.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __LS_16550_H__
+#define __LS_16550_H__
+
+#include <console.h>
+
+/* UART16550 Registers */
+#define UARTTX 0x0
+#define UARTRX 0x0
+#define UARTDLL 0x0
+#define UARTIER 0x1
+#define UARTDLLM 0x1
+#define UARTFCR 0x2
+#define UARTLCR 0x3
+#define UARTLSR 0x5
+#define UARTMCR 0x4
+
+/* FIFO Control Register bits */
+#define UARTFCR_FIFOMD_16450 (0 << 6)
+#define UARTFCR_FIFOMD_16550 (1 << 6)
+#define UARTFCR_RXTRIG_1 (0 << 6)
+#define UARTFCR_RXTRIG_4 (1 << 6)
+#define UARTFCR_RXTRIG_8 (2 << 6)
+#define UARTFCR_RXTRIG_16 (3 << 6)
+#define UARTFCR_TXTRIG_1 (0 << 4)
+#define UARTFCR_TXTRIG_4 (1 << 4)
+#define UARTFCR_TXTRIG_8 (2 << 4)
+#define UARTFCR_TXTRIG_16 (3 << 4)
+#define UARTFCR_DMAEN (1 << 3) /* Enable DMA mode */
+#define UARTFCR_TXCLR (1 << 2) /* Clear contents of Tx FIFO */
+#define UARTFCR_RXCLR (1 << 1) /* Clear contents of Rx FIFO */
+#define UARTFCR_FIFOEN (1 << 0) /* Enable the Tx/Rx FIFO */
+#define UARTFCR_64FIFO (1 << 5)
+
+/* Line Control Register bits */
+#define UARTLCR_DLAB (1 << 7) /* Divisor Latch Access */
+#define UARTLCR_SETB (1 << 6) /* Set BREAK Condition */
+#define UARTLCR_SETP (1 << 5) /* Set Parity to LCR[4] */
+#define UARTLCR_EVEN (1 << 4) /* Even Parity Format */
+#define UARTLCR_PAR (1 << 3) /* Parity */
+#define UARTLCR_STOP (1 << 2) /* Stop Bit */
+#define UARTLCR_WORDSZ_5 0 /* Word Length of 5 */
+#define UARTLCR_WORDSZ_6 1 /* Word Length of 6 */
+#define UARTLCR_WORDSZ_7 2 /* Word Length of 7 */
+#define UARTLCR_WORDSZ_8 3 /* Word Length of 8 */
+
+/* Line Status Register bits */
+#define UARTLSR_RXFIFOEMT (1 << 9) /* Rx Fifo Empty */
+#define UARTLSR_TXFIFOFULL (1 << 8) /* Tx Fifo Full */
+#define UARTLSR_RXFIFOERR (1 << 7) /* Rx Fifo Error */
+#define UARTLSR_TEMT (1 << 6) /* Tx Shift Register Empty */
+#define UARTLSR_THRE (1 << 5) /* Tx Holding Register Empty */
+#define UARTLSR_BRK (1 << 4) /* Break Condition Detected */
+#define UARTLSR_FERR (1 << 3) /* Framing Error */
+#define UARTLSR_PERR (1 << 3) /* Parity Error */
+#define UARTLSR_OVRF (1 << 2) /* Rx Overrun Error */
+#define UARTLSR_RDR (1 << 2) /* Rx Data Ready */
+
+#define CONSOLE_T_16550_BASE CONSOLE_T_DRVDATA
+
+#ifndef __ASSEMBLY__
+
+#include <types.h>
+
+typedef struct {
+ console_t console;
+ uintptr_t base;
+} console_ls_16550_t;
+
+/*
+ * Initialize a new 16550 console instance and register it with the console
+ * framework. The |console| pointer must point to storage that will be valid
+ * for the lifetime of the console, such as a global or static local variable.
+ * Its contents will be reinitialized from scratch.
+ */
+int console_ls_16550_register(uintptr_t baseaddr, uint32_t clock, uint32_t baud,
+ console_ls_16550_t *console);
+
+#endif /*__ASSEMBLY__*/
+
+#endif /* __LS_16550_H__ */