rcar_gen3: drivers: emmc
Signed-off-by: ldts <jramirez@baylibre.com>
diff --git a/drivers/renesas/rcar/emmc/emmc_mount.c b/drivers/renesas/rcar/emmc/emmc_mount.c
new file mode 100644
index 0000000..9a7d2ca
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_mount.c
@@ -0,0 +1,680 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include <mmio.h>
+#include "emmc_config.h"
+#include "emmc_hal.h"
+#include "emmc_std.h"
+#include "emmc_registers.h"
+#include "emmc_def.h"
+#include "micro_delay.h"
+#include "rcar_def.h"
+
+static EMMC_ERROR_CODE emmc_clock_ctrl(uint8_t mode);
+static EMMC_ERROR_CODE emmc_card_init(void);
+static EMMC_ERROR_CODE emmc_high_speed(void);
+static EMMC_ERROR_CODE emmc_bus_width(uint32_t width);
+static uint32_t emmc_set_timeout_register_value(uint32_t freq);
+static void set_sd_clk(uint32_t clkDiv);
+static uint32_t emmc_calc_tran_speed(uint32_t *freq);
+static void emmc_get_partition_access(void);
+static void emmc_set_bootpartition(void);
+
+static void emmc_set_bootpartition(void)
+{
+ uint32_t reg;
+
+ reg = mmio_read_32(RCAR_PRR) & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
+ if (reg == RCAR_PRODUCT_M3_CUT10) {
+ mmc_drv_obj.boot_partition_en =
+ (EMMC_PARTITION_ID) ((mmc_drv_obj.ext_csd_data[179] &
+ EMMC_BOOT_PARTITION_EN_MASK) >>
+ EMMC_BOOT_PARTITION_EN_SHIFT);
+ } else if ((reg == RCAR_PRODUCT_H3_CUT20)
+ || (reg == RCAR_PRODUCT_M3_CUT11)) {
+ mmc_drv_obj.boot_partition_en = mmc_drv_obj.partition_access;
+ } else {
+ if ((mmio_read_32(MFISBTSTSR) & MFISBTSTSR_BOOT_PARTITION) !=
+ 0U) {
+ mmc_drv_obj.boot_partition_en = PARTITION_ID_BOOT_2;
+ } else {
+ mmc_drv_obj.boot_partition_en = PARTITION_ID_BOOT_1;
+ }
+ }
+}
+
+static EMMC_ERROR_CODE emmc_card_init(void)
+{
+ int32_t retry;
+ uint32_t freq = MMC_400KHZ; /* 390KHz */
+ EMMC_ERROR_CODE result;
+ uint32_t resultCalc;
+
+ /* state check */
+ if ((mmc_drv_obj.initialize != TRUE)
+ || (mmc_drv_obj.card_power_enable != TRUE)
+ || ((GETR_32(SD_INFO2) & SD_INFO2_CBSY) != 0)
+ ) {
+ emmc_write_error_info(EMMC_FUNCNO_CARD_INIT, EMMC_ERR_STATE);
+ return EMMC_ERR_STATE;
+ }
+
+ /* clock on (force change) */
+ mmc_drv_obj.current_freq = 0;
+ mmc_drv_obj.max_freq = MMC_20MHZ;
+ result = emmc_set_request_mmc_clock(&freq);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ return EMMC_ERR;
+ }
+
+ rcar_micro_delay(1000U); /* wait 1ms */
+
+ /* Get current access partition */
+ emmc_get_partition_access();
+
+ /* CMD0, arg=0x00000000 */
+ result = emmc_send_idle_cmd(0x00000000);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ return result;
+ }
+
+ rcar_micro_delay(200U); /* wait 74clock 390kHz(189.74us) */
+
+ /* CMD1 */
+ emmc_make_nontrans_cmd(CMD1_SEND_OP_COND, EMMC_HOST_OCR_VALUE);
+ for (retry = 300; retry > 0; retry--) {
+ result =
+ emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ return result;
+ }
+
+ if ((mmc_drv_obj.r3_ocr & EMMC_OCR_STATUS_BIT) != 0) {
+ break; /* card is ready. exit loop */
+ }
+ rcar_micro_delay(1000U); /* wait 1ms */
+ }
+
+ if (retry == 0) {
+ emmc_write_error_info(EMMC_FUNCNO_CARD_INIT, EMMC_ERR_TIMEOUT);
+ return EMMC_ERR_TIMEOUT;
+ }
+
+ switch (mmc_drv_obj.r3_ocr & EMMC_OCR_ACCESS_MODE_MASK) {
+ case EMMC_OCR_ACCESS_MODE_SECT:
+ mmc_drv_obj.access_mode = TRUE; /* sector mode */
+ break;
+ default:
+ /* unknown value */
+ emmc_write_error_info(EMMC_FUNCNO_CARD_INIT, EMMC_ERR);
+ return EMMC_ERR;
+ }
+
+ /* CMD2 */
+ emmc_make_nontrans_cmd(CMD2_ALL_SEND_CID_MMC, 0x00000000);
+ mmc_drv_obj.response = (uint32_t *) (&mmc_drv_obj.cid_data[0]); /* use CID special buffer */
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ return result;
+ }
+
+ /* CMD3 */
+ emmc_make_nontrans_cmd(CMD3_SET_RELATIVE_ADDR, EMMC_RCA << 16);
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ return result;
+ }
+
+ /* CMD9 (CSD) */
+ emmc_make_nontrans_cmd(CMD9_SEND_CSD, EMMC_RCA << 16);
+ mmc_drv_obj.response = (uint32_t *) (&mmc_drv_obj.csd_data[0]); /* use CSD special buffer */
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ return result;
+ }
+
+ /* card version check */
+ if (EMMC_CSD_SPEC_VARS() < 4) {
+ emmc_write_error_info(EMMC_FUNCNO_CARD_INIT,
+ EMMC_ERR_ILLEGAL_CARD);
+ return EMMC_ERR_ILLEGAL_CARD;
+ }
+
+ /* CMD7 (select card) */
+ emmc_make_nontrans_cmd(CMD7_SELECT_CARD, EMMC_RCA << 16);
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ return result;
+ }
+
+ mmc_drv_obj.selected = TRUE;
+
+ /* card speed check */
+ resultCalc = emmc_calc_tran_speed(&freq); /* Card spec is calculated from TRAN_SPEED(CSD). */
+ if (resultCalc == 0) {
+ emmc_write_error_info(EMMC_FUNCNO_CARD_INIT,
+ EMMC_ERR_ILLEGAL_CARD);
+ return EMMC_ERR_ILLEGAL_CARD;
+ }
+ mmc_drv_obj.max_freq = freq; /* max frequency (card spec) */
+
+ result = emmc_set_request_mmc_clock(&freq);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ return EMMC_ERR;
+ }
+
+ /* set read/write timeout */
+ mmc_drv_obj.data_timeout = emmc_set_timeout_register_value(freq);
+ SETR_32(SD_OPTION,
+ ((GETR_32(SD_OPTION) & ~(SD_OPTION_TIMEOUT_CNT_MASK)) |
+ mmc_drv_obj.data_timeout));
+
+ /* SET_BLOCKLEN(512byte) */
+ /* CMD16 */
+ emmc_make_nontrans_cmd(CMD16_SET_BLOCKLEN, EMMC_BLOCK_LENGTH);
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ return result;
+ }
+
+ /* Transfer Data Length */
+ SETR_32(SD_SIZE, EMMC_BLOCK_LENGTH);
+
+ /* CMD8 (EXT_CSD) */
+ emmc_make_trans_cmd(CMD8_SEND_EXT_CSD, 0x00000000,
+ (uint32_t *) (&mmc_drv_obj.ext_csd_data[0]),
+ EMMC_MAX_EXT_CSD_LENGTH, HAL_MEMCARD_READ,
+ HAL_MEMCARD_NOT_DMA);
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ /* CMD12 is not send.
+ * If BUS initialization is failed, user must be execute Bus initialization again.
+ * Bus initialization is start CMD0(soft reset command).
+ */
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ return result;
+ }
+
+ /* Set boot partition */
+ emmc_set_bootpartition();
+
+ return EMMC_SUCCESS;
+}
+
+static EMMC_ERROR_CODE emmc_high_speed(void)
+{
+ uint32_t freq; /**< High speed mode clock frequency */
+ EMMC_ERROR_CODE result;
+ uint8_t cardType;
+
+ /* state check */
+ if (mmc_drv_obj.selected != TRUE) {
+ emmc_write_error_info(EMMC_FUNCNO_HIGH_SPEED, EMMC_ERR_STATE);
+ return EMMC_ERR_STATE;
+ }
+
+ /* max frequency */
+ cardType = (uint8_t) mmc_drv_obj.ext_csd_data[EMMC_EXT_CSD_CARD_TYPE];
+ if ((cardType & EMMC_EXT_CSD_CARD_TYPE_52MHZ) != 0)
+ freq = MMC_52MHZ;
+ else if ((cardType & EMMC_EXT_CSD_CARD_TYPE_26MHZ) != 0)
+ freq = MMC_26MHZ;
+ else
+ freq = MMC_20MHZ;
+
+ /* Hi-Speed-mode selction */
+ if ((MMC_52MHZ == freq) || (MMC_26MHZ == freq)) {
+ /* CMD6 */
+ emmc_make_nontrans_cmd(CMD6_SWITCH, EMMC_SWITCH_HS_TIMING);
+ result =
+ emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_HIGH_SPEED);
+ return result;
+ }
+
+ mmc_drv_obj.hs_timing = TIMING_HIGH_SPEED; /* High-Speed */
+ }
+
+ /* set mmc clock */
+ mmc_drv_obj.max_freq = freq;
+ result = emmc_set_request_mmc_clock(&freq);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_HIGH_SPEED);
+ return EMMC_ERR;
+ }
+
+ /* set read/write timeout */
+ mmc_drv_obj.data_timeout = emmc_set_timeout_register_value(freq);
+ SETR_32(SD_OPTION,
+ ((GETR_32(SD_OPTION) & ~(SD_OPTION_TIMEOUT_CNT_MASK)) |
+ mmc_drv_obj.data_timeout));
+
+ /* CMD13 */
+ emmc_make_nontrans_cmd(CMD13_SEND_STATUS, EMMC_RCA << 16);
+ result =
+ emmc_exec_cmd(EMMC_R1_ERROR_MASK_WITHOUT_CRC, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_HIGH_SPEED);
+ return result;
+ }
+
+ return EMMC_SUCCESS;
+}
+
+static EMMC_ERROR_CODE emmc_clock_ctrl(uint8_t mode)
+{
+ uint32_t value;
+
+ /* busy check */
+ if ((GETR_32(SD_INFO2) & SD_INFO2_CBSY) != 0) {
+ emmc_write_error_info(EMMC_FUNCNO_SET_CLOCK,
+ EMMC_ERR_CARD_BUSY);
+ return EMMC_ERR;
+ }
+
+ if (mode == TRUE) {
+ /* clock ON */
+ value =
+ ((GETR_32(SD_CLK_CTRL) | MMC_SD_CLK_START) &
+ SD_CLK_WRITE_MASK);
+ SETR_32(SD_CLK_CTRL, value); /* on */
+ mmc_drv_obj.clock_enable = TRUE;
+ } else {
+ /* clock OFF */
+ value =
+ ((GETR_32(SD_CLK_CTRL) & MMC_SD_CLK_STOP) &
+ SD_CLK_WRITE_MASK);
+ SETR_32(SD_CLK_CTRL, value); /* off */
+ mmc_drv_obj.clock_enable = FALSE;
+ }
+
+ return EMMC_SUCCESS;
+}
+
+static EMMC_ERROR_CODE emmc_bus_width(uint32_t width)
+{
+ EMMC_ERROR_CODE result = EMMC_ERR;
+
+ /* parameter check */
+ if ((width != 8) && (width != 4) && (width != 1)) {
+ emmc_write_error_info(EMMC_FUNCNO_BUS_WIDTH, EMMC_ERR_PARAM);
+ return EMMC_ERR_PARAM;
+ }
+
+ /* state check */
+ if (mmc_drv_obj.selected != TRUE) {
+ emmc_write_error_info(EMMC_FUNCNO_BUS_WIDTH, EMMC_ERR_STATE);
+ return EMMC_ERR_STATE;
+ }
+
+ mmc_drv_obj.bus_width = (HAL_MEMCARD_DATA_WIDTH) (width >> 2); /* 2 = 8bit, 1 = 4bit, 0 =1bit */
+
+ /* CMD6 */
+ emmc_make_nontrans_cmd(CMD6_SWITCH,
+ (EMMC_SWITCH_BUS_WIDTH_1 |
+ (mmc_drv_obj.bus_width << 8)));
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ /* occurred error */
+ mmc_drv_obj.bus_width = HAL_MEMCARD_DATA_WIDTH_1_BIT;
+ goto EXIT;
+ }
+
+ switch (mmc_drv_obj.bus_width) {
+ case HAL_MEMCARD_DATA_WIDTH_1_BIT:
+ SETR_32(SD_OPTION,
+ ((GETR_32(SD_OPTION) & ~(BIT15 | BIT13)) | BIT15));
+ break;
+ case HAL_MEMCARD_DATA_WIDTH_4_BIT:
+ SETR_32(SD_OPTION, (GETR_32(SD_OPTION) & ~(BIT15 | BIT13)));
+ break;
+ case HAL_MEMCARD_DATA_WIDTH_8_BIT:
+ SETR_32(SD_OPTION,
+ ((GETR_32(SD_OPTION) & ~(BIT15 | BIT13)) | BIT13));
+ break;
+ default:
+ goto EXIT;
+ }
+
+ /* CMD13 */
+ emmc_make_nontrans_cmd(CMD13_SEND_STATUS, EMMC_RCA << 16);
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ goto EXIT;
+ }
+
+ /* CMD8 (EXT_CSD) */
+ emmc_make_trans_cmd(CMD8_SEND_EXT_CSD, 0x00000000,
+ (uint32_t *) (&mmc_drv_obj.ext_csd_data[0]),
+ EMMC_MAX_EXT_CSD_LENGTH, HAL_MEMCARD_READ,
+ HAL_MEMCARD_NOT_DMA);
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ goto EXIT;
+ }
+
+ return EMMC_SUCCESS;
+
+EXIT:
+
+ emmc_write_error_info(EMMC_FUNCNO_BUS_WIDTH, result);
+ ERROR("BL2: emmc bus_width error end\n");
+ return result;
+}
+
+EMMC_ERROR_CODE emmc_select_partition(EMMC_PARTITION_ID id)
+{
+ EMMC_ERROR_CODE result;
+ uint32_t arg;
+ uint32_t partition_config;
+
+ /* state check */
+ if (mmc_drv_obj.mount != TRUE) {
+ emmc_write_error_info(EMMC_FUNCNO_NONE, EMMC_ERR_STATE);
+ return EMMC_ERR_STATE;
+ }
+
+ /* id = PARTITION_ACCESS(Bit[2:0]) */
+ if ((id & ~PARTITION_ID_MASK) != 0) {
+ emmc_write_error_info(EMMC_FUNCNO_NONE, EMMC_ERR_PARAM);
+ return EMMC_ERR_PARAM;
+ }
+
+ /* EXT_CSD[179] value */
+ partition_config =
+ (uint32_t) mmc_drv_obj.ext_csd_data[EMMC_EXT_CSD_PARTITION_CONFIG];
+ if ((partition_config & PARTITION_ID_MASK) == id) {
+ result = EMMC_SUCCESS;
+ } else {
+
+ partition_config =
+ (uint32_t) ((partition_config & ~PARTITION_ID_MASK) | id);
+ arg = EMMC_SWITCH_PARTITION_CONFIG | (partition_config << 8);
+
+ result = emmc_set_ext_csd(arg);
+ }
+
+ return result;
+}
+
+static void set_sd_clk(uint32_t clkDiv)
+{
+ uint32_t dataL;
+
+ dataL = (GETR_32(SD_CLK_CTRL) & (~SD_CLK_CTRL_CLKDIV_MASK));
+
+ switch (clkDiv) {
+ case 1:
+ dataL |= 0x000000FFU;
+ break; /* 1/1 */
+ case 2:
+ dataL |= 0x00000000U;
+ break; /* 1/2 */
+ case 4:
+ dataL |= 0x00000001U;
+ break; /* 1/4 */
+ case 8:
+ dataL |= 0x00000002U;
+ break; /* 1/8 */
+ case 16:
+ dataL |= 0x00000004U;
+ break; /* 1/16 */
+ case 32:
+ dataL |= 0x00000008U;
+ break; /* 1/32 */
+ case 64:
+ dataL |= 0x00000010U;
+ break; /* 1/64 */
+ case 128:
+ dataL |= 0x00000020U;
+ break; /* 1/128 */
+ case 256:
+ dataL |= 0x00000040U;
+ break; /* 1/256 */
+ case 512:
+ dataL |= 0x00000080U;
+ break; /* 1/512 */
+ }
+
+ SETR_32(SD_CLK_CTRL, dataL);
+ mmc_drv_obj.current_freq = (uint32_t) clkDiv;
+}
+
+static void emmc_get_partition_access(void)
+{
+ uint32_t reg;
+ EMMC_ERROR_CODE result;
+
+ reg = mmio_read_32(RCAR_PRR) & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
+ if ((reg == RCAR_PRODUCT_H3_CUT20) || (reg == RCAR_PRODUCT_M3_CUT11)) {
+ SETR_32(SD_OPTION, 0x000060EEU); /* 8 bits width */
+ /* CMD8 (EXT_CSD) */
+ emmc_make_trans_cmd(CMD8_SEND_EXT_CSD, 0x00000000U,
+ (uint32_t *) (&mmc_drv_obj.ext_csd_data[0]),
+ EMMC_MAX_EXT_CSD_LENGTH,
+ HAL_MEMCARD_READ, HAL_MEMCARD_NOT_DMA);
+ mmc_drv_obj.get_partition_access_flag = TRUE;
+ result =
+ emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ mmc_drv_obj.get_partition_access_flag = FALSE;
+ if (result == EMMC_SUCCESS) {
+ mmc_drv_obj.partition_access =
+ (EMMC_PARTITION_ID) (mmc_drv_obj.ext_csd_data[179]
+ & PARTITION_ID_MASK);
+ } else if (result == EMMC_ERR_CMD_TIMEOUT) {
+ mmc_drv_obj.partition_access = PARTITION_ID_BOOT_1;
+ } else {
+ emmc_write_error_info(EMMC_FUNCNO_GET_PERTITION_ACCESS,
+ result);
+ panic();
+ }
+ SETR_32(SD_OPTION, 0x0000C0EEU); /* Initialize */
+ }
+}
+
+static uint32_t emmc_calc_tran_speed(uint32_t *freq)
+{
+ const uint32_t unit[8] = { 10000, 100000, 1000000, 10000000,
+ 0, 0, 0, 0 }; /**< frequency unit (1/10) */
+ const uint32_t mult[16] = { 0, 10, 12, 13, 15, 20, 26, 30, 35, 40, 45,
+ 52, 55, 60, 70, 80 };
+
+ uint32_t maxFreq;
+ uint32_t result;
+ uint32_t tran_speed = EMMC_CSD_TRAN_SPEED();
+
+ /* tran_speed = 0x32
+ * unit[tran_speed&0x7] = uint[0x2] = 1000000
+ * mult[(tran_speed&0x78)>>3] = mult[0x30>>3] = mult[6] = 26
+ * 1000000 * 26 = 26000000 (26MHz)
+ */
+
+ result = 1;
+ maxFreq =
+ unit[tran_speed & EMMC_TRANSPEED_FREQ_UNIT_MASK] *
+ mult[(tran_speed & EMMC_TRANSPEED_MULT_MASK) >>
+ EMMC_TRANSPEED_MULT_SHIFT];
+
+ if (maxFreq == 0) {
+ result = 0;
+ } else if (MMC_FREQ_52MHZ <= maxFreq)
+ *freq = MMC_52MHZ;
+ else if (MMC_FREQ_26MHZ <= maxFreq)
+ *freq = MMC_26MHZ;
+ else if (MMC_FREQ_20MHZ <= maxFreq)
+ *freq = MMC_20MHZ;
+ else
+ *freq = MMC_400KHZ;
+
+ return result;
+}
+
+static uint32_t emmc_set_timeout_register_value(uint32_t freq)
+{
+ uint32_t timeoutCnt; /* SD_OPTION - Timeout Counter */
+
+ switch (freq) {
+ case 1U:
+ timeoutCnt = 0xE0U;
+ break; /* SDCLK * 2^27 */
+ case 2U:
+ timeoutCnt = 0xE0U;
+ break; /* SDCLK * 2^27 */
+ case 4U:
+ timeoutCnt = 0xD0U;
+ break; /* SDCLK * 2^26 */
+ case 8U:
+ timeoutCnt = 0xC0U;
+ break; /* SDCLK * 2^25 */
+ case 16U:
+ timeoutCnt = 0xB0U;
+ break; /* SDCLK * 2^24 */
+ case 32U:
+ timeoutCnt = 0xA0U;
+ break; /* SDCLK * 2^23 */
+ case 64U:
+ timeoutCnt = 0x90U;
+ break; /* SDCLK * 2^22 */
+ case 128U:
+ timeoutCnt = 0x80U;
+ break; /* SDCLK * 2^21 */
+ case 256U:
+ timeoutCnt = 0x70U;
+ break; /* SDCLK * 2^20 */
+ case 512U:
+ timeoutCnt = 0x70U;
+ break; /* SDCLK * 2^20 */
+ default:
+ timeoutCnt = 0xE0U;
+ break; /* SDCLK * 2^27 */
+ }
+
+ return timeoutCnt;
+}
+
+EMMC_ERROR_CODE emmc_set_ext_csd(uint32_t arg)
+{
+ EMMC_ERROR_CODE result;
+
+ /* CMD6 */
+ emmc_make_nontrans_cmd(CMD6_SWITCH, arg);
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ return result;
+ }
+
+ /* CMD13 */
+ emmc_make_nontrans_cmd(CMD13_SEND_STATUS, EMMC_RCA << 16);
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ return result;
+ }
+
+ /* CMD8 (EXT_CSD) */
+ emmc_make_trans_cmd(CMD8_SEND_EXT_CSD, 0x00000000,
+ (uint32_t *) (&mmc_drv_obj.ext_csd_data[0]),
+ EMMC_MAX_EXT_CSD_LENGTH, HAL_MEMCARD_READ,
+ HAL_MEMCARD_NOT_DMA);
+ result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+ if (result != EMMC_SUCCESS) {
+ return result;
+ }
+ return EMMC_SUCCESS;
+}
+
+EMMC_ERROR_CODE emmc_set_request_mmc_clock(uint32_t *freq)
+{
+ /* parameter check */
+ if (freq == NULL) {
+ emmc_write_error_info(EMMC_FUNCNO_SET_CLOCK, EMMC_ERR_PARAM);
+ return EMMC_ERR_PARAM;
+ }
+
+ /* state check */
+ if ((mmc_drv_obj.initialize != TRUE)
+ || (mmc_drv_obj.card_power_enable != TRUE)) {
+ emmc_write_error_info(EMMC_FUNCNO_SET_CLOCK, EMMC_ERR_STATE);
+ return EMMC_ERR_STATE;
+ }
+
+ /* clock is already running in the desired frequency. */
+ if ((mmc_drv_obj.clock_enable == TRUE)
+ && (mmc_drv_obj.current_freq == *freq)) {
+ return EMMC_SUCCESS;
+ }
+
+ /* busy check */
+ if ((GETR_32(SD_INFO2) & SD_INFO2_CBSY) != 0) {
+ emmc_write_error_info(EMMC_FUNCNO_SET_CLOCK,
+ EMMC_ERR_CARD_BUSY);
+ return EMMC_ERR;
+ }
+
+ set_sd_clk(*freq);
+ mmc_drv_obj.clock_enable = FALSE;
+
+ return emmc_clock_ctrl(TRUE); /* clock on */
+}
+
+EMMC_ERROR_CODE rcar_emmc_mount(void)
+{
+ EMMC_ERROR_CODE result;
+
+ /* state check */
+ if ((mmc_drv_obj.initialize != TRUE)
+ || (mmc_drv_obj.card_power_enable != TRUE)
+ || ((GETR_32(SD_INFO2) & SD_INFO2_CBSY) != 0)
+ ) {
+ emmc_write_error_info(EMMC_FUNCNO_MOUNT, EMMC_ERR_STATE);
+ return EMMC_ERR_STATE;
+ }
+
+ /* initialize card (IDLE state --> Transfer state) */
+ result = emmc_card_init();
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+ if (emmc_clock_ctrl(FALSE) != EMMC_SUCCESS) {
+ /* nothing to do. */
+ }
+ return result;
+ }
+
+ /* Switching high speed mode */
+ result = emmc_high_speed();
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_HIGH_SPEED);
+ if (emmc_clock_ctrl(FALSE) != EMMC_SUCCESS) {
+ /* nothing to do. */
+ }
+ return result;
+ }
+
+ /* Changing the data bus width */
+ result = emmc_bus_width(8);
+ if (result != EMMC_SUCCESS) {
+ emmc_write_error_info_func_no(EMMC_FUNCNO_BUS_WIDTH);
+ if (emmc_clock_ctrl(FALSE) != EMMC_SUCCESS) {
+ /* nothing to do. */
+ }
+ return result;
+ }
+
+ /* mount complete */
+ mmc_drv_obj.mount = TRUE;
+
+ return EMMC_SUCCESS;
+}