diff --git a/plat/arm/board/a5ds/fdts/a5ds_fw_config.dts b/plat/arm/board/a5ds/fdts/a5ds_fw_config.dts
index b9d90538..b9ff8bf 100644
--- a/plat/arm/board/a5ds/fdts/a5ds_fw_config.dts
+++ b/plat/arm/board/a5ds/fdts/a5ds_fw_config.dts
@@ -12,9 +12,8 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained in this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x2001010>;
+			load-address = <0x0 0x2001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
@@ -25,11 +24,4 @@
 			id = <HW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-	};
 };
diff --git a/plat/arm/board/a5ds/fdts/a5ds_tb_fw_config.dts b/plat/arm/board/a5ds/fdts/a5ds_tb_fw_config.dts
new file mode 100644
index 0000000..c66186f
--- /dev/null
+++ b/plat/arm/board/a5ds/fdts/a5ds_tb_fw_config.dts
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+	};
+};
diff --git a/plat/arm/board/a5ds/platform.mk b/plat/arm/board/a5ds/platform.mk
index 3a4d5e5..7693e46 100644
--- a/plat/arm/board/a5ds/platform.mk
+++ b/plat/arm/board/a5ds/platform.mk
@@ -72,10 +72,13 @@
 # Add the FDT_SOURCES and options for Dynamic Config (only for Unix env)
 ifdef UNIX_MK
 
-FVP_TB_FW_CONFIG	:=	${BUILD_PLAT}/fdts/a5ds_fw_config.dtb
+FW_CONFIG	:=      ${BUILD_PLAT}/fdts/a5ds_fw_config.dtb
+TB_FW_CONFIG	:=	${BUILD_PLAT}/fdts/a5ds_tb_fw_config.dtb
 
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
-$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TB_FW_CONFIG},--tb-fw-config))
+$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config))
 
 $(eval FVP_HW_CONFIG	:=	${BUILD_PLAT}/$(patsubst %.dts,%.dtb, \
 	fdts/$(notdir ${FVP_HW_CONFIG_DTS})))
@@ -83,6 +86,7 @@
 $(eval $(call TOOL_ADD_PAYLOAD,${FVP_HW_CONFIG},--hw-config))
 
 FDT_SOURCES		+=	plat/arm/board/a5ds/fdts/a5ds_fw_config.dts \
+				plat/arm/board/a5ds/fdts/a5ds_tb_fw_config.dts \
 					${FVP_HW_CONFIG_DTS}
 endif
 
diff --git a/plat/arm/board/fvp/fdts/fvp_fw_config.dts b/plat/arm/board/fvp/fdts/fvp_fw_config.dts
index 5f89284..605b70c 100644
--- a/plat/arm/board/fvp/fdts/fvp_fw_config.dts
+++ b/plat/arm/board/fvp/fdts/fvp_fw_config.dts
@@ -12,9 +12,8 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained on this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x4001010>;
+			load-address = <0x0 0x4001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
@@ -49,83 +48,4 @@
 			id = <NT_FW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-
-		/*
-		 * The following two entries are placeholders for Mbed TLS
-		 * heap information. The default values don't matter since
-		 * they will be overwritten by BL1.
-		 * In case of having shared Mbed TLS heap between BL1 and BL2,
-		 * BL1 will populate these two properties with the respective
-		 * info about the shared heap. This info will be available for
-		 * BL2 in order to locate and re-use the heap.
-		 */
-		mbedtls_heap_addr = <0x0 0x0>;
-		mbedtls_heap_size = <0x0>;
-
-#if MEASURED_BOOT
-		/* BL2 image hash calculated by BL1 */
-		bl2_hash_data = [
-			00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-#if BL2_HASH_SIZE > 32
-			00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-#if BL2_HASH_SIZE > 48
-			00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-#endif /* > 48 */
-#endif /* > 32 */
-			00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00];
-#endif /* MEASURED_BOOT */
-	};
-
-	/*
-	 * Though TF-A is UUID RFC 4122 compliant meaning fields are stored in
-	 * network order (big endian), UUID's mentioned in this file are are
-	 * stored in machine order (little endian).
-	 * This will be fixed in future.
-	 */
-#if ARM_IO_IN_DTB
-	arm-io_policies {
-		fip-handles {
-			compatible = "arm,io-fip-handle";
-			scp_bl2_uuid = <0x3dfd6697 0x49e8be89 0xa1785dae 0x13826040>;
-			bl31_uuid = <0x6d08d447 0x4698fe4c 0x5029959b 0x005abdcb>;
-			bl32_uuid = <0x89e1d005 0x4713dc53 0xa502b8d 0x383e7a4b>;
-			bl32_extra1_uuid = <0x9bc2700b 0x40785a2a 0x560a659f 0x88827382>;
-			bl32_extra2_uuid = <0xb17ba88e 0x4d3fa2cf 0xbbe7fd85 0xd92002a5>;
-			bl33_uuid = <0xa7eed0d6 0x4bd5eafc 0x34998297 0xe4b634f2>;
-			hw_cfg_uuid = <0xd9f1b808 0x4993cfc9 0xbc6f62a9 0xcc65726b>;
-			soc_fw_cfg_uuid = <0x4b817999 0x46fb7603 0x268d8e8c 0xe059787f>;
-			tos_fw_cfg_uuid = <0x1a7c2526 0x477fc6db 0xc4c4968d 0x218024b0>;
-			nt_fw_cfg_uuid = <0x1598da28 0x447ee893 0xaf1a66ac 0xf9501580>;
-			t_key_cert_uuid = <0x90e87e82 0x11e460f8 0x7a77b4a1 0x4cf9b421>;
-			scp_fw_key_uuid = <0xa1214202 0x11e460f8 0x3cf39b8d 0x14a0150e>;
-			soc_fw_key_uuid = <0xccbeb88a 0x11e460f9 0x48ebd09a 0xf8dcd822>;
-			tos_fw_key_cert_uuid = <0x3d67794 0x11e460fb 0x10b7dd85 0x4ee8c5b>;
-			nt_fw_key_cert_uuid = <0x2a83d58a 0x11e460fb 0x30dfaf8a 0x5998c4bb>;
-			scp_fw_content_cert_uuid = <0x046fbe44 0x11e4635e 0xd8738bb2 0x5696aeea>;
-			soc_fw_content_cert_uuid = <0x200cb2e2 0x11e4635e 0xccabe89c 0x66b62bf9>;
-			tos_fw_content_cert_uuid = <0x11449fa4 0x11e4635e 0x53f2887 0x3df32a72>;
-			nt_fw_content_cert_uuid = <0xf3c1c48e 0x11e4635d 0xee87a9a7 0xa73fb240>;
-			sp_content_cert_uuid = <0x44fd6d77 0x3b4c9786 0x3ec1eb91 0x6f2a5a02>;
-		};
-	};
-#endif /* ARM_IO_IN_DTB */
-
-	secure-partitions {
-		compatible = "arm,sp";
-		cactus-primary {
-			uuid = <0x1e67b5b4 0xe14f904a 0x13fb1fb8 0xcbdae1da>;
-			load-address = <0x7000000>;
-		};
-
-		cactus-secondary {
-			uuid = <0x092358d1 0xb94723f0 0x64447c82 0xc88f57f5>;
-			load-address = <0x7100000>;
-		};
-	};
 };
diff --git a/plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts b/plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts
new file mode 100644
index 0000000..9cffad3
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2020, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+
+#if MEASURED_BOOT
+		/* BL2 image hash calculated by BL1 */
+		bl2_hash_data = [
+			00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+#if BL2_HASH_SIZE > 32
+			00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+#if BL2_HASH_SIZE > 48
+			00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+#endif /* > 48 */
+#endif /* > 32 */
+			00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00];
+#endif /* MEASURED_BOOT */
+	};
+
+	/*
+	 * Though TF-A is UUID RFC 4122 compliant meaning fields are stored in
+	 * network order (big endian), UUID's mentioned in this file are are
+	 * stored in machine order (little endian).
+	 * This will be fixed in future.
+	 */
+#if ARM_IO_IN_DTB
+	arm-io_policies {
+		fip-handles {
+			compatible = "arm,io-fip-handle";
+			scp_bl2_uuid = <0x3dfd6697 0x49e8be89 0xa1785dae 0x13826040>;
+			bl31_uuid = <0x6d08d447 0x4698fe4c 0x5029959b 0x005abdcb>;
+			bl32_uuid = <0x89e1d005 0x4713dc53 0xa502b8d 0x383e7a4b>;
+			bl32_extra1_uuid = <0x9bc2700b 0x40785a2a 0x560a659f 0x88827382>;
+			bl32_extra2_uuid = <0xb17ba88e 0x4d3fa2cf 0xbbe7fd85 0xd92002a5>;
+			bl33_uuid = <0xa7eed0d6 0x4bd5eafc 0x34998297 0xe4b634f2>;
+			hw_cfg_uuid = <0xd9f1b808 0x4993cfc9 0xbc6f62a9 0xcc65726b>;
+			soc_fw_cfg_uuid = <0x4b817999 0x46fb7603 0x268d8e8c 0xe059787f>;
+			tos_fw_cfg_uuid = <0x1a7c2526 0x477fc6db 0xc4c4968d 0x218024b0>;
+			nt_fw_cfg_uuid = <0x1598da28 0x447ee893 0xaf1a66ac 0xf9501580>;
+			t_key_cert_uuid = <0x90e87e82 0x11e460f8 0x7a77b4a1 0x4cf9b421>;
+			scp_fw_key_uuid = <0xa1214202 0x11e460f8 0x3cf39b8d 0x14a0150e>;
+			soc_fw_key_uuid = <0xccbeb88a 0x11e460f9 0x48ebd09a 0xf8dcd822>;
+			tos_fw_key_cert_uuid = <0x3d67794 0x11e460fb 0x10b7dd85 0x4ee8c5b>;
+			nt_fw_key_cert_uuid = <0x2a83d58a 0x11e460fb 0x30dfaf8a 0x5998c4bb>;
+			scp_fw_content_cert_uuid = <0x046fbe44 0x11e4635e 0xd8738bb2 0x5696aeea>;
+			soc_fw_content_cert_uuid = <0x200cb2e2 0x11e4635e 0xccabe89c 0x66b62bf9>;
+			tos_fw_content_cert_uuid = <0x11449fa4 0x11e4635e 0x53f2887 0x3df32a72>;
+			nt_fw_content_cert_uuid = <0xf3c1c48e 0x11e4635d 0xee87a9a7 0xa73fb240>;
+			sp_content_cert_uuid = <0x44fd6d77 0x3b4c9786 0x3ec1eb91 0x6f2a5a02>;
+		};
+	};
+#endif /* ARM_IO_IN_DTB */
+
+	secure-partitions {
+		compatible = "arm,sp";
+		cactus-primary {
+			uuid = <0x1e67b5b4 0xe14f904a 0x13fb1fb8 0xcbdae1da>;
+			load-address = <0x7000000>;
+		};
+
+		cactus-secondary {
+			uuid = <0x092358d1 0xb94723f0 0x64447c82 0xc88f57f5>;
+			load-address = <0x7100000>;
+		};
+	};
+};
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
index 7d670ac..4925865 100644
--- a/plat/arm/board/fvp/platform.mk
+++ b/plat/arm/board/fvp/platform.mk
@@ -236,11 +236,13 @@
 FVP_HW_CONFIG_DTS	:=	fdts/${FVP_DT_PREFIX}.dts
 FDT_SOURCES		+=	$(addprefix plat/arm/board/fvp/fdts/,	\
 					${PLAT}_fw_config.dts		\
+					${PLAT}_tb_fw_config.dts	\
 					${PLAT}_soc_fw_config.dts	\
 					${PLAT}_nt_fw_config.dts	\
 				)
 
-FVP_TB_FW_CONFIG	:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FVP_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FVP_TB_FW_CONFIG	:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
 FVP_SOC_FW_CONFIG	:=	${BUILD_PLAT}/fdts/${PLAT}_soc_fw_config.dtb
 FVP_NT_FW_CONFIG	:=	${BUILD_PLAT}/fdts/${PLAT}_nt_fw_config.dtb
 
@@ -260,6 +262,8 @@
 $(eval $(call TOOL_ADD_PAYLOAD,${FVP_TOS_FW_CONFIG},--tos-fw-config))
 endif
 
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${FVP_TB_FW_CONFIG},--tb-fw-config))
 # Add the SOC_FW_CONFIG to FIP and specify the same to certtool
diff --git a/plat/arm/board/fvp_ve/fdts/fvp_ve_fw_config.dts b/plat/arm/board/fvp_ve/fdts/fvp_ve_fw_config.dts
index d4f98d9..6e5691b 100644
--- a/plat/arm/board/fvp_ve/fdts/fvp_ve_fw_config.dts
+++ b/plat/arm/board/fvp_ve/fdts/fvp_ve_fw_config.dts
@@ -12,9 +12,8 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained on this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x80001010>;
+			load-address = <0x0 0x80001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
@@ -25,11 +24,4 @@
 			id = <HW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-	};
 };
diff --git a/plat/arm/board/fvp_ve/fdts/fvp_ve_tb_fw_config.dts b/plat/arm/board/fvp_ve/fdts/fvp_ve_tb_fw_config.dts
new file mode 100644
index 0000000..c66186f
--- /dev/null
+++ b/plat/arm/board/fvp_ve/fdts/fvp_ve_tb_fw_config.dts
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+	};
+};
diff --git a/plat/arm/board/fvp_ve/platform.mk b/plat/arm/board/fvp_ve/platform.mk
index 9ada86b..62981c5 100644
--- a/plat/arm/board/fvp_ve/platform.mk
+++ b/plat/arm/board/fvp_ve/platform.mk
@@ -74,10 +74,14 @@
 # Add the FDT_SOURCES and options for Dynamic Config (only for Unix env)
 ifdef UNIX_MK
 
-FDT_SOURCES		+=	plat/arm/board/fvp_ve/fdts/fvp_ve_fw_config.dts
+FDT_SOURCES		+=	plat/arm/board/fvp_ve/fdts/fvp_ve_fw_config.dts	\
+				plat/arm/board/fvp_ve/fdts/fvp_ve_tb_fw_config.dts
 
-FVP_TB_FW_CONFIG	:=	${BUILD_PLAT}/fdts/fvp_ve_fw_config.dtb
+FVP_FW_CONFIG		:=	${BUILD_PLAT}/fdts/fvp_ve_fw_config.dtb
+FVP_TB_FW_CONFIG	:=	${BUILD_PLAT}/fdts/fvp_ve_tb_fw_config.dtb
 
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${FVP_TB_FW_CONFIG},--tb-fw-config))
 
diff --git a/plat/arm/board/juno/fdts/juno_fw_config.dts b/plat/arm/board/juno/fdts/juno_fw_config.dts
index 60ca60d..c0538f8 100644
--- a/plat/arm/board/juno/fdts/juno_fw_config.dts
+++ b/plat/arm/board/juno/fdts/juno_fw_config.dts
@@ -12,29 +12,10 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained on this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x4001010>;
+			load-address = <0x0 0x4001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		/* Platform Config */
-		compatible = "arm,tb_fw";
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-		/*
-		 * The following two entries are placeholders for Mbed TLS
-		 * heap information. The default values don't matter since
-		 * they will be overwritten by BL1.
-		 * In case of having shared Mbed TLS heap between BL1 and BL2,
-		 * BL1 will populate these two properties with the respective
-		 * info about the shared heap. This info will be available for
-		 * BL2 in order to locate and re-use the heap.
-		 */
-		mbedtls_heap_addr = <0x0 0x0>;
-		mbedtls_heap_size = <0x0>;
-	};
 };
diff --git a/plat/arm/board/juno/fdts/juno_tb_fw_config.dts b/plat/arm/board/juno/fdts/juno_tb_fw_config.dts
new file mode 100644
index 0000000..80cfa3e
--- /dev/null
+++ b/plat/arm/board/juno/fdts/juno_tb_fw_config.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2020, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+	};
+};
diff --git a/plat/arm/board/juno/platform.mk b/plat/arm/board/juno/platform.mk
index a871e81..8ca7f61 100644
--- a/plat/arm/board/juno/platform.mk
+++ b/plat/arm/board/juno/platform.mk
@@ -164,9 +164,14 @@
 endif
 
 # Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES		+=	plat/arm/board/juno/fdts/${PLAT}_fw_config.dts
-TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FDT_SOURCES		+=	plat/arm/board/juno/fdts/${PLAT}_fw_config.dts	\
+				plat/arm/board/juno/fdts/${PLAT}_tb_fw_config.dts
 
+FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
+
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
 
diff --git a/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts b/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts
index b9265ad..9c9cefe 100644
--- a/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts
+++ b/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts
@@ -12,9 +12,8 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained on this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x4001010>;
+			load-address = <0x0 0x4001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
@@ -25,23 +24,4 @@
 			id = <NT_FW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-
-		/*
-		 * The following two entries are placeholders for Mbed TLS
-		 * heap information. The default values don't matter since
-		 * they will be overwritten by BL1.
-		 * In case of having shared Mbed TLS heap between BL1 and BL2,
-		 * BL1 will populate these two properties with the respective
-		 * info about the shared heap. This info will be available for
-		 * BL2 in order to locate and re-use the heap.
-		 */
-		mbedtls_heap_addr = <0x0 0x0>;
-		mbedtls_heap_size = <0x0>;
-	};
 };
diff --git a/plat/arm/board/rddaniel/fdts/rddaniel_tb_fw_config.dts b/plat/arm/board/rddaniel/fdts/rddaniel_tb_fw_config.dts
new file mode 100644
index 0000000..49eda27
--- /dev/null
+++ b/plat/arm/board/rddaniel/fdts/rddaniel_tb_fw_config.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+	};
+};
diff --git a/plat/arm/board/rddaniel/platform.mk b/plat/arm/board/rddaniel/platform.mk
index 94a3928..bdf20ca 100644
--- a/plat/arm/board/rddaniel/platform.mk
+++ b/plat/arm/board/rddaniel/platform.mk
@@ -33,9 +33,13 @@
 				plat/arm/common/arm_nor_psci_mem_protect.c
 
 # Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES		+=	${RDDANIEL_BASE}/fdts/${PLAT}_fw_config.dts
-TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FDT_SOURCES		+=	${RDDANIEL_BASE}/fdts/${PLAT}_fw_config.dts	\
+				${RDDANIEL_BASE}/fdts/${PLAT}_tb_fw_config.dts
+FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
 
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
 
diff --git a/plat/arm/board/rddanielxlr/fdts/rddanielxlr_fw_config.dts b/plat/arm/board/rddanielxlr/fdts/rddanielxlr_fw_config.dts
index b9265ad..9c9cefe 100644
--- a/plat/arm/board/rddanielxlr/fdts/rddanielxlr_fw_config.dts
+++ b/plat/arm/board/rddanielxlr/fdts/rddanielxlr_fw_config.dts
@@ -12,9 +12,8 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained on this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x4001010>;
+			load-address = <0x0 0x4001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
@@ -25,23 +24,4 @@
 			id = <NT_FW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-
-		/*
-		 * The following two entries are placeholders for Mbed TLS
-		 * heap information. The default values don't matter since
-		 * they will be overwritten by BL1.
-		 * In case of having shared Mbed TLS heap between BL1 and BL2,
-		 * BL1 will populate these two properties with the respective
-		 * info about the shared heap. This info will be available for
-		 * BL2 in order to locate and re-use the heap.
-		 */
-		mbedtls_heap_addr = <0x0 0x0>;
-		mbedtls_heap_size = <0x0>;
-	};
 };
diff --git a/plat/arm/board/rddanielxlr/fdts/rddanielxlr_tb_fw_config.dts b/plat/arm/board/rddanielxlr/fdts/rddanielxlr_tb_fw_config.dts
new file mode 100644
index 0000000..49eda27
--- /dev/null
+++ b/plat/arm/board/rddanielxlr/fdts/rddanielxlr_tb_fw_config.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+	};
+};
diff --git a/plat/arm/board/rddanielxlr/platform.mk b/plat/arm/board/rddanielxlr/platform.mk
index 36a0099..1482c81 100644
--- a/plat/arm/board/rddanielxlr/platform.mk
+++ b/plat/arm/board/rddanielxlr/platform.mk
@@ -36,9 +36,13 @@
 BL31_CFLAGS		+=	-DPLAT_XLAT_TABLES_DYNAMIC
 
 # Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES		+=	${RDDANIELXLR_BASE}/fdts/${PLAT}_fw_config.dts
-TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FDT_SOURCES		+=	${RDDANIELXLR_BASE}/fdts/${PLAT}_fw_config.dts	\
+				${RDDANIELXLR_BASE}/fdts/${PLAT}_tb_fw_config.dts
+FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
 
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
 
diff --git a/plat/arm/board/rde1edge/fdts/rde1edge_fw_config.dts b/plat/arm/board/rde1edge/fdts/rde1edge_fw_config.dts
index 09b9867..69fb0d4 100644
--- a/plat/arm/board/rde1edge/fdts/rde1edge_fw_config.dts
+++ b/plat/arm/board/rde1edge/fdts/rde1edge_fw_config.dts
@@ -12,9 +12,8 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained on this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x4001010>;
+			load-address = <0x0 0x4001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
@@ -25,23 +24,4 @@
 			id = <NT_FW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-
-		/*
-		 * The following two entries are placeholders for Mbed TLS
-		 * heap information. The default values don't matter since
-		 * they will be overwritten by BL1.
-		 * In case of having shared Mbed TLS heap between BL1 and BL2,
-		 * BL1 will populate these two properties with the respective
-		 * info about the shared heap. This info will be available for
-		 * BL2 in order to locate and re-use the heap.
-		 */
-		mbedtls_heap_addr = <0x0 0x0>;
-		mbedtls_heap_size = <0x0>;
-	};
 };
diff --git a/plat/arm/board/rde1edge/fdts/rde1edge_tb_fw_config.dts b/plat/arm/board/rde1edge/fdts/rde1edge_tb_fw_config.dts
new file mode 100644
index 0000000..dba91e5
--- /dev/null
+++ b/plat/arm/board/rde1edge/fdts/rde1edge_tb_fw_config.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2020, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+	};
+};
diff --git a/plat/arm/board/rde1edge/platform.mk b/plat/arm/board/rde1edge/platform.mk
index 1a4dd17..e09afca 100644
--- a/plat/arm/board/rde1edge/platform.mk
+++ b/plat/arm/board/rde1edge/platform.mk
@@ -35,9 +35,13 @@
 endif
 
 # Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES		+=	${RDE1EDGE_BASE}/fdts/${PLAT}_fw_config.dts
-TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FDT_SOURCES		+=	${RDE1EDGE_BASE}/fdts/${PLAT}_fw_config.dts	\
+				${RDE1EDGE_BASE}/fdts/${PLAT}_tb_fw_config.dts
+FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
 
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
 
diff --git a/plat/arm/board/rdn1edge/fdts/rdn1edge_fw_config.dts b/plat/arm/board/rdn1edge/fdts/rdn1edge_fw_config.dts
index c9dee60..d3b7fba 100644
--- a/plat/arm/board/rdn1edge/fdts/rdn1edge_fw_config.dts
+++ b/plat/arm/board/rdn1edge/fdts/rdn1edge_fw_config.dts
@@ -11,9 +11,8 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained on this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x4001010>;
+			load-address = <0x0 0x4001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
@@ -24,24 +23,5 @@
 			id = <NT_FW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-
-		/*
-		 * The following two entries are placeholders for Mbed TLS
-		 * heap information. The default values don't matter since
-		 * they will be overwritten by BL1.
-		 * In case of having shared Mbed TLS heap between BL1 and BL2,
-		 * BL1 will populate these two properties with the respective
-		 * info about the shared heap. This info will be available for
-		 * BL2 in order to locate and re-use the heap.
-		 */
-		mbedtls_heap_addr = <0x0 0x0>;
-		mbedtls_heap_size = <0x0>;
-	};
 };
 
diff --git a/plat/arm/board/rdn1edge/fdts/rdn1edge_tb_fw_config.dts b/plat/arm/board/rdn1edge/fdts/rdn1edge_tb_fw_config.dts
new file mode 100644
index 0000000..257ef4a
--- /dev/null
+++ b/plat/arm/board/rdn1edge/fdts/rdn1edge_tb_fw_config.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+	};
+};
diff --git a/plat/arm/board/rdn1edge/platform.mk b/plat/arm/board/rdn1edge/platform.mk
index e436542..3f0cc7f 100644
--- a/plat/arm/board/rdn1edge/platform.mk
+++ b/plat/arm/board/rdn1edge/platform.mk
@@ -41,9 +41,13 @@
 BL31_CPPFLAGS		+=	-DPLAT_XLAT_TABLES_DYNAMIC
 
 # Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES		+=	${RDN1EDGE_BASE}/fdts/${PLAT}_fw_config.dts
-TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FDT_SOURCES		+=	${RDN1EDGE_BASE}/fdts/${PLAT}_fw_config.dts	\
+				${RDN1EDGE_BASE}/fdts/${PLAT}_tb_fw_config.dts
+FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
 
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
 
diff --git a/plat/arm/board/sgi575/fdts/sgi575_fw_config.dts b/plat/arm/board/sgi575/fdts/sgi575_fw_config.dts
index 94d0e39..84fc1ad 100644
--- a/plat/arm/board/sgi575/fdts/sgi575_fw_config.dts
+++ b/plat/arm/board/sgi575/fdts/sgi575_fw_config.dts
@@ -12,9 +12,8 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained on this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x4001010>;
+			load-address = <0x0 0x4001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
@@ -25,23 +24,4 @@
 			id = <NT_FW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-
-		/*
-		 * The following two entries are placeholders for Mbed TLS
-		 * heap information. The default values don't matter since
-		 * they will be overwritten by BL1.
-		 * In case of having shared Mbed TLS heap between BL1 and BL2,
-		 * BL1 will populate these two properties with the respective
-		 * info about the shared heap. This info will be available for
-		 * BL2 in order to locate and re-use the heap.
-		 */
-		mbedtls_heap_addr = <0x0 0x0>;
-		mbedtls_heap_size = <0x0>;
-	};
 };
diff --git a/plat/arm/board/sgi575/fdts/sgi575_tb_fw_config.dts b/plat/arm/board/sgi575/fdts/sgi575_tb_fw_config.dts
new file mode 100644
index 0000000..49eda27
--- /dev/null
+++ b/plat/arm/board/sgi575/fdts/sgi575_tb_fw_config.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+	};
+};
diff --git a/plat/arm/board/sgi575/platform.mk b/plat/arm/board/sgi575/platform.mk
index d91f829..f5d547d 100644
--- a/plat/arm/board/sgi575/platform.mk
+++ b/plat/arm/board/sgi575/platform.mk
@@ -35,9 +35,14 @@
 endif
 
 # Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES		+=	${SGI575_BASE}/fdts/${PLAT}_fw_config.dts
-TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FDT_SOURCES		+=	${SGI575_BASE}/fdts/${PLAT}_fw_config.dts	\
+				${SGI575_BASE}/fdts/${PLAT}_tb_fw_config.dts
 
+FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
+
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
 
diff --git a/plat/arm/board/sgm775/fdts/sgm775_fw_config.dts b/plat/arm/board/sgm775/fdts/sgm775_fw_config.dts
index c92c1d0..5d478e9 100644
--- a/plat/arm/board/sgm775/fdts/sgm775_fw_config.dts
+++ b/plat/arm/board/sgm775/fdts/sgm775_fw_config.dts
@@ -12,30 +12,10 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained on this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x4001010>;
+			load-address = <0x0 0x4001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-
-		/*
-		 * The following two entries are placeholders for Mbed TLS
-		 * heap information. The default values don't matter since
-		 * they will be overwritten by BL1.
-		 * In case of having shared Mbed TLS heap between BL1 and BL2,
-		 * BL1 will populate these two properties with the respective
-		 * info about the shared heap. This info will be available for
-		 * BL2 in order to locate and re-use the heap.
-		 */
-		mbedtls_heap_addr = <0x0 0x0>;
-		mbedtls_heap_size = <0x0>;
-	};
 };
diff --git a/plat/arm/board/sgm775/fdts/sgm775_tb_fw_config.dts b/plat/arm/board/sgm775/fdts/sgm775_tb_fw_config.dts
new file mode 100644
index 0000000..49eda27
--- /dev/null
+++ b/plat/arm/board/sgm775/fdts/sgm775_tb_fw_config.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+	};
+};
diff --git a/plat/arm/board/sgm775/platform.mk b/plat/arm/board/sgm775/platform.mk
index 57edb92..26bc25d 100644
--- a/plat/arm/board/sgm775/platform.mk
+++ b/plat/arm/board/sgm775/platform.mk
@@ -9,9 +9,13 @@
 SGM775_BASE= plat/arm/board/sgm775
 
 # Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES            +=      ${SGM775_BASE}/fdts/${PLAT}_fw_config.dts
-TB_FW_CONFIG           :=      ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FDT_SOURCES		+=      ${SGM775_BASE}/fdts/${PLAT}_fw_config.dts	\
+				${SGM775_BASE}/fdts/${PLAT}_tb_fw_config.dts
+FW_CONFIG		:=      ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+TB_FW_CONFIG		:=      ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
 
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
 
diff --git a/plat/arm/board/tc0/fdts/tc0_fw_config.dts b/plat/arm/board/tc0/fdts/tc0_fw_config.dts
index 8458e08..381ce1f 100644
--- a/plat/arm/board/tc0/fdts/tc0_fw_config.dts
+++ b/plat/arm/board/tc0/fdts/tc0_fw_config.dts
@@ -12,9 +12,8 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained in this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x4001010>;
+			load-address = <0x0 0x4001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
@@ -25,22 +24,4 @@
 			id = <HW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-		/*
-		 * The following two entries are placeholders for Mbed TLS
-		 * heap information. The default values don't matter since
-		 * they will be overwritten by BL1.
-		 * In case of having shared Mbed TLS heap between BL1 and BL2,
-		 * BL1 will populate these two properties with the respective
-		 * info about the shared heap. This info will be available for
-		 * BL2 in order to locate and re-use the heap.
-		 */
-		mbedtls_heap_addr = <0x0 0x0>;
-		mbedtls_heap_size = <0x0>;
-	};
 };
diff --git a/plat/arm/board/tc0/fdts/tc0_tb_fw_config.dts b/plat/arm/board/tc0/fdts/tc0_tb_fw_config.dts
new file mode 100644
index 0000000..2fd25d9
--- /dev/null
+++ b/plat/arm/board/tc0/fdts/tc0_tb_fw_config.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+	};
+};
diff --git a/plat/arm/board/tc0/platform.mk b/plat/arm/board/tc0/platform.mk
index 7f514cc..0bf18e4 100644
--- a/plat/arm/board/tc0/platform.mk
+++ b/plat/arm/board/tc0/platform.mk
@@ -73,9 +73,13 @@
 				plat/arm/common/arm_nor_psci_mem_protect.c
 
 # Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES		+=	${TC0_BASE}/fdts/${PLAT}_fw_config.dts
-TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FDT_SOURCES		+=	${TC0_BASE}/fdts/${PLAT}_fw_config.dts	\
+				${TC0_BASE}/fdts/${PLAT}_tb_fw_config.dts
+FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
 
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
 
diff --git a/plat/arm/css/sgm/fdts/sgm_tb_fw_config.dts b/plat/arm/css/sgm/fdts/sgm_tb_fw_config.dts
index d481018..e416540 100644
--- a/plat/arm/css/sgm/fdts/sgm_tb_fw_config.dts
+++ b/plat/arm/css/sgm/fdts/sgm_tb_fw_config.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */