Add support for QEMU virt ARMv8-A target
This patch adds support for the QEMU virt ARMv8-A target.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
diff --git a/plat/qemu/qemu_bl31_setup.c b/plat/qemu/qemu_bl31_setup.c
new file mode 100644
index 0000000..7a48358
--- /dev/null
+++ b/plat/qemu/qemu_bl31_setup.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <gicv2.h>
+#include <platform_def.h>
+#include "qemu_private.h"
+
+/*
+ * The next 3 constants identify the extents of the code, RO data region and the
+ * limit of the BL3-1 image. These addresses are used by the MMU setup code and
+ * therefore they must be page-aligned. It is the responsibility of the linker
+ * script to ensure that __RO_START__, __RO_END__ & __BL31_END__ linker symbols
+ * refer to page-aligned addresses.
+ */
+#define BL31_RO_BASE (unsigned long)(&__RO_START__)
+#define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
+#define BL31_END (unsigned long)(&__BL31_END__)
+
+/*
+ * The next 2 constants identify the extents of the coherent memory region.
+ * These addresses are used by the MMU setup code and therefore they must be
+ * page-aligned. It is the responsibility of the linker script to ensure that
+ * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
+ * refer to page-aligned addresses.
+ */
+#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
+#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL3-1 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+/*******************************************************************************
+ * Perform any BL3-1 early platform setup. Here is an opportunity to copy
+ * parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before
+ * they are lost (potentially). This needs to be done before the MMU is
+ * initialized so that the memory layout can be used while creating page
+ * tables. BL2 has flushed this information to memory, so we are guaranteed
+ * to pick up good data.
+ ******************************************************************************/
+void bl31_early_platform_setup(bl31_params_t *from_bl2,
+ void *plat_params_from_bl2)
+{
+ /* Initialize the console to provide early debug support */
+ console_init(PLAT_QEMU_BOOT_UART_BASE, PLAT_QEMU_BOOT_UART_CLK_IN_HZ,
+ PLAT_QEMU_CONSOLE_BAUDRATE);
+
+ /*
+ * Check params passed from BL2 should not be NULL,
+ */
+ assert(from_bl2 != NULL);
+ assert(from_bl2->h.type == PARAM_BL31);
+ assert(from_bl2->h.version >= VERSION_1);
+ /*
+ * In debug builds, we pass a special value in 'plat_params_from_bl2'
+ * to verify platform parameters from BL2 to BL3-1.
+ * In release builds, it's not used.
+ */
+ assert(((unsigned long long)plat_params_from_bl2) ==
+ QEMU_BL31_PLAT_PARAM_VAL);
+
+ /*
+ * Copy BL3-2 (if populated by BL2) and BL3-3 entry point information.
+ * They are stored in Secure RAM, in BL2's address space.
+ */
+ if (from_bl2->bl32_ep_info)
+ bl32_image_ep_info = *from_bl2->bl32_ep_info;
+ bl33_image_ep_info = *from_bl2->bl33_ep_info;
+}
+
+void bl31_plat_arch_setup(void)
+{
+ qemu_configure_mmu_el3(BL31_RO_BASE, (BL31_END - BL31_RO_BASE),
+ BL31_RO_BASE, BL31_RO_LIMIT,
+ BL31_COHERENT_RAM_BASE, BL31_COHERENT_RAM_LIMIT);
+}
+
+static const unsigned int irq_sec_array[] = {
+ QEMU_IRQ_SEC_SGI_0,
+ QEMU_IRQ_SEC_SGI_1,
+ QEMU_IRQ_SEC_SGI_2,
+ QEMU_IRQ_SEC_SGI_3,
+ QEMU_IRQ_SEC_SGI_4,
+ QEMU_IRQ_SEC_SGI_5,
+ QEMU_IRQ_SEC_SGI_6,
+ QEMU_IRQ_SEC_SGI_7,
+};
+
+static const struct gicv2_driver_data plat_gicv2_driver_data = {
+ .gicd_base = GICD_BASE,
+ .gicc_base = GICC_BASE,
+ .g0_interrupt_num = ARRAY_SIZE(irq_sec_array),
+ .g0_interrupt_array = irq_sec_array,
+};
+
+void bl31_platform_setup(void)
+{
+ /* Initialize the gic cpu and distributor interfaces */
+ gicv2_driver_init(&plat_gicv2_driver_data);
+ gicv2_distif_init();
+ gicv2_pcpu_distif_init();
+ gicv2_cpuif_enable();
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+ return SYS_COUNTER_FREQ_IN_TICKS;
+}
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image
+ * for the security state specified. BL3-3 corresponds to the non-secure
+ * image type while BL3-2 corresponds to the secure image type. A NULL
+ * pointer is returned if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+ entry_point_info_t *next_image_info;
+
+ assert(sec_state_is_valid(type));
+ next_image_info = (type == NON_SECURE)
+ ? &bl33_image_ep_info : &bl32_image_ep_info;
+ /*
+ * None of the images on the ARM development platforms can have 0x0
+ * as the entrypoint
+ */
+ if (next_image_info->pc)
+ return next_image_info;
+ else
+ return NULL;
+}