blob: 670d49931066a5ebc2b9262d12d7524a1b4ab22f [file] [log] [blame]
#
# Copyright (c) 2018-2021, Renesas Electronics Corporation. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
include plat/renesas/common/common.mk
ifndef LSI
$(error "Error: Unknown LSI. Please use LSI=<LSI name> to specify the LSI")
else
ifeq (${LSI},AUTO)
RCAR_LSI:=${RCAR_AUTO}
else ifeq (${LSI},H3)
RCAR_LSI:=${RCAR_H3}
ifndef LSI_CUT
# enable compatible function.
RCAR_LSI_CUT_COMPAT := 1
$(eval $(call add_define,RCAR_LSI_CUT_COMPAT))
else
# disable compatible function.
ifeq (${LSI_CUT},10)
RCAR_LSI_CUT:=0
else ifeq (${LSI_CUT},11)
RCAR_LSI_CUT:=1
else ifeq (${LSI_CUT},20)
RCAR_LSI_CUT:=10
else ifeq (${LSI_CUT},30)
RCAR_LSI_CUT:=20
else
$(error "Error: ${LSI_CUT} is not supported.")
endif
$(eval $(call add_define,RCAR_LSI_CUT))
endif
else ifeq (${LSI},H3N)
RCAR_LSI:=${RCAR_H3N}
ifndef LSI_CUT
# enable compatible function.
RCAR_LSI_CUT_COMPAT := 1
$(eval $(call add_define,RCAR_LSI_CUT_COMPAT))
else
# disable compatible function.
ifeq (${LSI_CUT},30)
RCAR_LSI_CUT:=20
else
$(error "Error: ${LSI_CUT} is not supported.")
endif
$(eval $(call add_define,RCAR_LSI_CUT))
endif
else ifeq (${LSI},M3)
RCAR_LSI:=${RCAR_M3}
ifndef LSI_CUT
# enable compatible function.
RCAR_LSI_CUT_COMPAT := 1
$(eval $(call add_define,RCAR_LSI_CUT_COMPAT))
else
# disable compatible function.
ifeq (${LSI_CUT},10)
RCAR_LSI_CUT:=0
else ifeq (${LSI_CUT},11)
RCAR_LSI_CUT:=1
else ifeq (${LSI_CUT},13)
RCAR_LSI_CUT:=3
else ifeq (${LSI_CUT},30)
RCAR_LSI_CUT:=20
else
$(error "Error: ${LSI_CUT} is not supported.")
endif
$(eval $(call add_define,RCAR_LSI_CUT))
endif
else ifeq (${LSI},M3N)
RCAR_LSI:=${RCAR_M3N}
ifndef LSI_CUT
# enable compatible function.
RCAR_LSI_CUT_COMPAT := 1
$(eval $(call add_define,RCAR_LSI_CUT_COMPAT))
else
# disable compatible function.
ifeq (${LSI_CUT},10)
RCAR_LSI_CUT:=0
else ifeq (${LSI_CUT},11)
RCAR_LSI_CUT:=1
else
$(error "Error: ${LSI_CUT} is not supported.")
endif
$(eval $(call add_define,RCAR_LSI_CUT))
endif
else ifeq (${LSI},E3)
RCAR_LSI:=${RCAR_E3}
ifndef LSI_CUT
# enable compatible function.
RCAR_LSI_CUT_COMPAT := 1
$(eval $(call add_define,RCAR_LSI_CUT_COMPAT))
else
# disable compatible function.
ifeq (${LSI_CUT},10)
RCAR_LSI_CUT:=0
else ifeq (${LSI_CUT},11)
RCAR_LSI_CUT:=1
else
$(error "Error: ${LSI_CUT} is not supported.")
endif
$(eval $(call add_define,RCAR_LSI_CUT))
endif
else ifeq (${LSI},D3)
RCAR_LSI:=${RCAR_D3}
ifndef LSI_CUT
# enable compatible function.
RCAR_LSI_CUT_COMPAT := 1
$(eval $(call add_define,RCAR_LSI_CUT_COMPAT))
else
# disable compatible function.
ifeq (${LSI_CUT},10)
RCAR_LSI_CUT:=0
else
$(error "Error: ${LSI_CUT} is not supported.")
endif
$(eval $(call add_define,RCAR_LSI_CUT))
endif
else ifeq (${LSI},V3M)
RCAR_LSI:=${RCAR_V3M}
ifndef LSI_CUT
# enable compatible function.
RCAR_LSI_CUT_COMPAT := 1
$(eval $(call add_define,RCAR_LSI_CUT_COMPAT))
else
# disable compatible function.
ifeq (${LSI_CUT},10)
RCAR_LSI_CUT:=0
endif
ifeq (${LSI_CUT},20)
RCAR_LSI_CUT:=10
endif
$(eval $(call add_define,RCAR_LSI_CUT))
endif
else
$(error "Error: ${LSI} is not supported.")
endif
$(eval $(call add_define,RCAR_LSI))
endif
# lock RPC HYPERFLASH access by default
# unlock to repogram the ATF firmware from u-boot
ifndef RCAR_RPC_HYPERFLASH_LOCKED
RCAR_RPC_HYPERFLASH_LOCKED := 1
endif
$(eval $(call add_define,RCAR_RPC_HYPERFLASH_LOCKED))
# Process RCAR_SECURE_BOOT flag
ifndef RCAR_SECURE_BOOT
RCAR_SECURE_BOOT := 1
endif
$(eval $(call add_define,RCAR_SECURE_BOOT))
# Process RCAR_QOS_TYPE flag
ifndef RCAR_QOS_TYPE
RCAR_QOS_TYPE := 0
endif
$(eval $(call add_define,RCAR_QOS_TYPE))
# Process RCAR_DRAM_SPLIT flag
ifndef RCAR_DRAM_SPLIT
RCAR_DRAM_SPLIT := 0
endif
$(eval $(call add_define,RCAR_DRAM_SPLIT))
# Process RCAR_BL33_EXECUTION_EL flag
ifndef RCAR_BL33_EXECUTION_EL
RCAR_BL33_EXECUTION_EL := 0
endif
$(eval $(call add_define,RCAR_BL33_EXECUTION_EL))
# Process RCAR_AVS_SETTING_ENABLE flag
ifeq (${RCAR_AVS_SETTING_ENABLE},0)
AVS_SETTING_ENABLE := 0
else
AVS_SETTING_ENABLE := 1
endif
$(eval $(call add_define,AVS_SETTING_ENABLE))
# Process RCAR_LOSSY_ENABLE flag
ifndef RCAR_LOSSY_ENABLE
RCAR_LOSSY_ENABLE := 0
endif
$(eval $(call add_define,RCAR_LOSSY_ENABLE))
# Process LIFEC_DBSC_PROTECT_ENABLE flag
ifndef LIFEC_DBSC_PROTECT_ENABLE
LIFEC_DBSC_PROTECT_ENABLE := 1
endif
$(eval $(call add_define,LIFEC_DBSC_PROTECT_ENABLE))
# Process PMIC_ROHM_BD9571 flag
ifndef PMIC_ROHM_BD9571
PMIC_ROHM_BD9571 := 1
endif
$(eval $(call add_define,PMIC_ROHM_BD9571))
# Process PMIC_LEVEL_MODE flag
ifndef PMIC_LEVEL_MODE
PMIC_LEVEL_MODE := 1
endif
$(eval $(call add_define,PMIC_LEVEL_MODE))
# Process RCAR_GEN3_ULCB flag
ifndef RCAR_GEN3_ULCB
RCAR_GEN3_ULCB := 0
endif
ifeq (${RCAR_GEN3_ULCB},1)
BOARD_DEFAULT := 0x10
$(eval $(call add_define,BOARD_DEFAULT))
endif
$(eval $(call add_define,RCAR_GEN3_ULCB))
# Process RCAR_REF_INT flag
ifndef RCAR_REF_INT
RCAR_REF_INT :=0
endif
$(eval $(call add_define,RCAR_REF_INT))
# Process RCAR_REWT_TRAINING flag
ifndef RCAR_REWT_TRAINING
RCAR_REWT_TRAINING := 1
endif
$(eval $(call add_define,RCAR_REWT_TRAINING))
# Process RCAR_SYSTEM_SUSPEND flag
ifndef RCAR_SYSTEM_SUSPEND
RCAR_SYSTEM_SUSPEND := 1
endif
$(eval $(call add_define,RCAR_SYSTEM_SUSPEND))
# SYSTEM_SUSPEND requires power control of PMIC etc.
# When executing SYSTEM_SUSPEND other than Salvator-X, Salvator-XS and Ebisu,
# processing equivalent to that implemented in PMIC_ROHM_BD9571 is necessary.
ifeq (${RCAR_SYSTEM_SUSPEND},1)
ifeq (${PMIC_ROHM_BD9571},0)
$(error "Error: When you want RCAR_SYSTEM_SUSPEND to be enable, please also set PMIC_ROHM_BD9571 to enable.")
endif
endif
# Process RCAR_DRAM_LPDDR4_MEMCONF flag
ifndef RCAR_DRAM_LPDDR4_MEMCONF
RCAR_DRAM_LPDDR4_MEMCONF :=1
endif
$(eval $(call add_define,RCAR_DRAM_LPDDR4_MEMCONF))
# Process RCAR_DRAM_MEMRANK flag
ifndef RCAR_DRAM_MEMRANK
RCAR_DRAM_MEMRANK :=0
endif
$(eval $(call add_define,RCAR_DRAM_MEMRANK))
# Process RCAR_DRAM_DDR3L_MEMCONF flag
ifndef RCAR_DRAM_DDR3L_MEMCONF
RCAR_DRAM_DDR3L_MEMCONF :=1
endif
$(eval $(call add_define,RCAR_DRAM_DDR3L_MEMCONF))
# Process RCAR_DRAM_DDR3L_MEMDUAL flag
ifndef RCAR_DRAM_DDR3L_MEMDUAL
RCAR_DRAM_DDR3L_MEMDUAL :=1
endif
$(eval $(call add_define,RCAR_DRAM_DDR3L_MEMDUAL))
# Process RCAR_BL33_ARG0 flag
ifdef RCAR_BL33_ARG0
$(eval $(call add_define,RCAR_BL33_ARG0))
endif
#Process RCAR_BL2_DCACHE flag
ifndef RCAR_BL2_DCACHE
RCAR_BL2_DCACHE := 0
endif
$(eval $(call add_define,RCAR_BL2_DCACHE))
# Process RCAR_DRAM_CHANNEL flag
ifndef RCAR_DRAM_CHANNEL
RCAR_DRAM_CHANNEL :=15
endif
$(eval $(call add_define,RCAR_DRAM_CHANNEL))
#Process RCAR_SYSTEM_RESET_KEEPON_DDR flag
ifndef RCAR_SYSTEM_RESET_KEEPON_DDR
RCAR_SYSTEM_RESET_KEEPON_DDR := 0
endif
$(eval $(call add_define,RCAR_SYSTEM_RESET_KEEPON_DDR))
ifndef RCAR_GEN3_BL33_GZIP
RCAR_GEN3_BL33_GZIP := 0
endif
$(eval $(call add_define,RCAR_GEN3_BL33_GZIP))
# RCAR_SYSTEM_RESET_KEEPON_DDR requires power control of PMIC etc.
# When executing SYSTEM_SUSPEND other than Salvator-X, Salvator-XS and Ebisu,
# processing equivalent to that implemented in PMIC_ROHM_BD9571 is necessary.
# Also, it is necessary to enable RCAR_SYSTEM_SUSPEND.
ifeq (${RCAR_SYSTEM_RESET_KEEPON_DDR},1)
ifeq (${PMIC_ROHM_BD9571},0)
$(error "Error: When you want RCAR_SYSTEM_RESET_KEEPON_DDR to be enable, please also set PMIC_ROHM_BD9571 to enable.")
endif
ifeq (${RCAR_SYSTEM_SUSPEND},0)
$(error "Error: When you want RCAR_SYSTEM_RESET_KEEPON_DDR to be enable, please also set RCAR_SYSTEM_SUSPEND to enable.")
endif
endif
include drivers/renesas/common/ddr/ddr.mk
include drivers/renesas/rcar/qos/qos.mk
include drivers/renesas/rcar/pfc/pfc.mk
include lib/libfdt/libfdt.mk
PLAT_INCLUDES += -Idrivers/renesas/common/ddr \
-Idrivers/renesas/rcar/qos \
-Idrivers/renesas/rcar/board \
-Idrivers/renesas/rcar/cpld/ \
-Idrivers/renesas/common \
-Idrivers/renesas/common/iic_dvfs \
-Idrivers/renesas/common/avs \
-Idrivers/renesas/common/delay \
-Idrivers/renesas/common/rom \
-Idrivers/renesas/common/scif \
-Idrivers/renesas/common/emmc \
-Idrivers/renesas/common/pwrc \
-Idrivers/renesas/common/io
BL2_SOURCES += plat/renesas/rcar/bl2_plat_setup.c \
drivers/renesas/rcar/board/board.c
ifeq (${RCAR_GEN3_BL33_GZIP},1)
include lib/zlib/zlib.mk
BL2_SOURCES += common/image_decompress.c \
$(ZLIB_SOURCES)
endif
ifeq (${RCAR_GEN3_ULCB},1)
BL31_SOURCES += drivers/renesas/rcar/cpld/ulcb_cpld.c
endif
# build the layout images for the bootrom and the necessary srecords
rcar: rcar_layout_tool rcar_srecord
distclean realclean clean: clean_layout_tool clean_srecord
# layout images
LAYOUT_TOOLPATH ?= tools/renesas/rcar_layout_create
clean_layout_tool:
@echo "clean layout tool"
${Q}${MAKE} -C ${LAYOUT_TOOLPATH} clean
.PHONY: rcar_layout_tool
rcar_layout_tool:
@echo "generating layout srecs"
${Q}${MAKE} CPPFLAGS="-D=AARCH64" --no-print-directory -C ${LAYOUT_TOOLPATH}
# srecords
SREC_PATH = ${BUILD_PLAT}
BL2_ELF_SRC = ${SREC_PATH}/bl2/bl2.elf
BL31_ELF_SRC = ${SREC_PATH}/bl31/bl31.elf
clean_srecord:
@echo "clean bl2 and bl31 srecs"
rm -f ${SREC_PATH}/bl2.srec ${SREC_PATH}/bl31.srec
.PHONY: rcar_srecord
rcar_srecord: $(BL2_ELF_SRC) $(BL31_ELF_SRC)
@echo "generating srec: ${SREC_PATH}/bl2.srec"
$(Q)$(OC) -O srec --srec-forceS3 ${BL2_ELF_SRC} ${SREC_PATH}/bl2.srec
@echo "generating srec: ${SREC_PATH}/bl31.srec"
$(Q)$(OC) -O srec --srec-forceS3 ${BL31_ELF_SRC} ${SREC_PATH}/bl31.srec