diff --git a/Makefile b/Makefile
index 2f53cdf..7627797 100644
--- a/Makefile
+++ b/Makefile
@@ -889,6 +889,7 @@
 $(eval $(call assert_boolean,USE_DEBUGFS))
 $(eval $(call assert_boolean,ARM_IO_IN_DTB))
 $(eval $(call assert_boolean,SDEI_IN_FCONF))
+$(eval $(call assert_boolean,SEC_INT_DESC_IN_FCONF))
 $(eval $(call assert_boolean,USE_ROMLIB))
 $(eval $(call assert_boolean,USE_TBBR_DEFS))
 $(eval $(call assert_boolean,WARMBOOT_ENABLE_DCACHE_EARLY))
@@ -969,6 +970,7 @@
 $(eval $(call add_define,USE_DEBUGFS))
 $(eval $(call add_define,ARM_IO_IN_DTB))
 $(eval $(call add_define,SDEI_IN_FCONF))
+$(eval $(call add_define,SEC_INT_DESC_IN_FCONF))
 $(eval $(call add_define,USE_ROMLIB))
 $(eval $(call add_define,USE_TBBR_DEFS))
 $(eval $(call add_define,WARMBOOT_ENABLE_DCACHE_EARLY))
diff --git a/docs/getting_started/build-options.rst b/docs/getting_started/build-options.rst
index c863079..7ca1067 100644
--- a/docs/getting_started/build-options.rst
+++ b/docs/getting_started/build-options.rst
@@ -651,6 +651,12 @@
    than static C structures at compile time. This is currently an experimental
    feature and is only supported if SDEI_SUPPORT build flag is enabled.
 
+-  ``SEC_INT_DESC_IN_FCONF``: This flag determines whether to configure Group 0
+   and Group1 secure interrupts using the firmware configuration framework. The
+   platform specific secure interrupt property descriptor is retrieved from
+   device tree in runtime rather than depending on static C structure at compile
+   time. This is currently an experimental feature.
+
 -  ``USE_ROMLIB``: This flag determines whether library at ROM will be used.
    This feature creates a library of functions to be placed in ROM and thus
    reduces SRAM usage. Refer to :ref:`Library at ROM` for further details. Default
diff --git a/fdts/fvp-base-gicv3-psci-common.dtsi b/fdts/fvp-base-gicv3-psci-common.dtsi
index 0deb8a2..192f574 100644
--- a/fdts/fvp-base-gicv3-psci-common.dtsi
+++ b/fdts/fvp-base-gicv3-psci-common.dtsi
@@ -6,6 +6,11 @@
 
 #include <services/sdei_flags.h>
 
+#define LEVEL	0
+#define EDGE	2
+#define SDEI_NORMAL	0x70
+#define HIGHEST_SEC	0
+
 /memreserve/ 0x80000000 0x00010000;
 
 / {
@@ -38,8 +43,9 @@
 		max-pwr-lvl = <2>;
 	};
 
-#if SDEI_IN_FCONF
+#if SDEI_IN_FCONF || SEC_INT_DESC_IN_FCONF
 	firmware {
+#if SDEI_IN_FCONF
 		sdei {
 			compatible = "arm,sdei-1.0";
 			method = "smc";
@@ -59,9 +65,38 @@
 						<2001 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>,
 						<2002 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>;
 		};
-	};
 #endif /* SDEI_IN_FCONF */
 
+#if SEC_INT_DESC_IN_FCONF
+		sec_interrupts {
+			compatible = "arm,secure_interrupt_desc";
+			/* Number of G0 and G1 secure interrupts defined by the platform */
+			g0_intr_cnt = <2>;
+			g1s_intr_cnt = <9>;
+			/*
+			 * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
+			 * terminology. Each interrupt property descriptor has 3 fields:
+			 * 1. Interrupt number
+			 * 2. Interrupt priority
+			 * 3. Type of interrupt (Edge or Level configured)
+			 */
+			g0_intr_desc =	< 8 SDEI_NORMAL EDGE>,
+					<14 HIGHEST_SEC EDGE>;
+
+			g1s_intr_desc =	< 9 HIGHEST_SEC EDGE>,
+					<10 HIGHEST_SEC EDGE>,
+					<11 HIGHEST_SEC EDGE>,
+					<12 HIGHEST_SEC EDGE>,
+					<13 HIGHEST_SEC EDGE>,
+					<15 HIGHEST_SEC EDGE>,
+					<29 HIGHEST_SEC LEVEL>,
+					<56 HIGHEST_SEC LEVEL>,
+					<57 HIGHEST_SEC LEVEL>;
+		};
+#endif /* SEC_INT_DESC_IN_FCONF */
+	};
+#endif /* SDEI_IN_FCONF || SEC_INT_DESC_IN_FCONF */
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
diff --git a/include/plat/arm/common/fconf_sec_intr_config.h b/include/plat/arm/common/fconf_sec_intr_config.h
new file mode 100644
index 0000000..5d6b594
--- /dev/null
+++ b/include/plat/arm/common/fconf_sec_intr_config.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FCONF_SEC_INTR_CONFIG_H
+#define FCONF_SEC_INTR_CONFIG_H
+
+#include <lib/fconf/fconf.h>
+
+#include <platform_def.h>
+
+#define hw_config__sec_intr_prop_getter(id)	sec_intr_prop.id
+
+#define SEC_INT_COUNT_MAX U(15)
+
+struct sec_intr_prop_t {
+	interrupt_prop_t descriptor[SEC_INT_COUNT_MAX];
+	uint32_t count;
+};
+
+int fconf_populate_sec_intr_config(uintptr_t config);
+
+extern struct sec_intr_prop_t sec_intr_prop;
+
+#endif /* FCONF_SEC_INTR_CONFIG_H */
diff --git a/make_helpers/defaults.mk b/make_helpers/defaults.mk
index e5880d2..585f06f 100644
--- a/make_helpers/defaults.mk
+++ b/make_helpers/defaults.mk
@@ -226,7 +226,10 @@
 ARM_IO_IN_DTB			:= 0
 
 # Build option to support SDEI through fconf
-SDEI_IN_FCONF			:=0
+SDEI_IN_FCONF			:= 0
+
+# Build option to support Secure Interrupt descriptors through fconf
+SEC_INT_DESC_IN_FCONF		:= 0
 
 # Build option to choose whether Trusted Firmware uses library at ROM
 USE_ROMLIB			:= 0
diff --git a/plat/arm/board/fvp/fvp_gicv3.c b/plat/arm/board/fvp/fvp_gicv3.c
index a3ee8ef..3e04d6b 100644
--- a/plat/arm/board/fvp/fvp_gicv3.c
+++ b/plat/arm/board/fvp/fvp_gicv3.c
@@ -12,6 +12,7 @@
 #include <fconf_hw_config_getter.h>
 #include <lib/utils.h>
 #include <plat/arm/common/plat_arm.h>
+#include <plat/arm/common/fconf_sec_intr_config.h>
 #include <plat/common/platform.h>
 
 /* The GICv3 driver only needs to be initialized in EL3 */
@@ -23,10 +24,13 @@
 /* List of zero terminated GICR frame addresses which CPUs will probe */
 static uint64_t *fvp_gicr_frames = fvp_gicr_base_addrs;
 
+#if  !(SEC_INT_DESC_IN_FCONF && ((!defined(__aarch64__) && defined(IMAGE_BL32)) || \
+	(defined(__aarch64__) && defined(IMAGE_BL31))))
 static const interrupt_prop_t fvp_interrupt_props[] = {
 	PLAT_ARM_G1S_IRQ_PROPS(INTR_GROUP1S),
 	PLAT_ARM_G0_IRQ_PROPS(INTR_GROUP0)
 };
+#endif
 
 /*
  * MPIDR hashing function for translating MPIDRs read from GICR_TYPER register
@@ -52,8 +56,6 @@
 
 
 static gicv3_driver_data_t fvp_gic_data = {
-	.interrupt_props = fvp_interrupt_props,
-	.interrupt_props_num = ARRAY_SIZE(fvp_interrupt_props),
 	.rdistif_num = PLATFORM_CORE_COUNT,
 	.rdistif_base_addrs = fvp_rdistif_base_addrs,
 	.mpidr_to_core_pos = fvp_gicv3_mpidr_hash
@@ -61,7 +63,10 @@
 
 void plat_arm_gic_driver_init(void)
 {
-	/* Get GICD and GICR base addressed through FCONF APIs */
+	/*
+	 * Get GICD and GICR base addressed through FCONF APIs.
+	 * FCONF is not supported in BL32 for FVP.
+	 */
 #if (!defined(__aarch64__) && defined(IMAGE_BL32)) || \
 	(defined(__aarch64__) && defined(IMAGE_BL31))
 	fvp_gic_data.gicd_base = (uintptr_t)FCONF_GET_PROPERTY(hw_config,
@@ -69,9 +74,20 @@
 							       gicd_base);
 	fvp_gicr_base_addrs[0] = FCONF_GET_PROPERTY(hw_config, gicv3_config,
 						    gicr_base);
+#if SEC_INT_DESC_IN_FCONF
+	fvp_gic_data.interrupt_props = FCONF_GET_PROPERTY(hw_config,
+					sec_intr_prop, descriptor);
+	fvp_gic_data.interrupt_props_num = FCONF_GET_PROPERTY(hw_config,
+					sec_intr_prop, count);
+#else
+	fvp_gic_data.interrupt_props = fvp_interrupt_props;
+	fvp_gic_data.interrupt_props_num = ARRAY_SIZE(fvp_interrupt_props);
+#endif
 #else
 	fvp_gic_data.gicd_base = PLAT_ARM_GICD_BASE;
 	fvp_gicr_base_addrs[0] = PLAT_ARM_GICR_BASE;
+	fvp_gic_data.interrupt_props = fvp_interrupt_props;
+	fvp_gic_data.interrupt_props_num = ARRAY_SIZE(fvp_interrupt_props);
 #endif
 
 	/*
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
index 024e682..e605608 100644
--- a/plat/arm/board/fvp/platform.mk
+++ b/plat/arm/board/fvp/platform.mk
@@ -221,6 +221,11 @@
 BL31_SOURCES		+=	common/fdt_wrappers.c				\
 				lib/fconf/fconf.c				\
 				plat/arm/board/fvp/fconf/fconf_hw_config_getter.c
+
+ifeq (${SEC_INT_DESC_IN_FCONF},1)
+BL31_SOURCES		+=	plat/arm/common/fconf/fconf_sec_intr_config.c
+endif
+
 endif
 
 ifeq (${FVP_USE_SP804_TIMER},1)
diff --git a/plat/arm/board/fvp/sp_min/sp_min-fvp.mk b/plat/arm/board/fvp/sp_min/sp_min-fvp.mk
index ba6ceec..64cb7ad 100644
--- a/plat/arm/board/fvp/sp_min/sp_min-fvp.mk
+++ b/plat/arm/board/fvp/sp_min/sp_min-fvp.mk
@@ -25,6 +25,11 @@
 BL32_SOURCES		+=	common/fdt_wrappers.c				\
 				lib/fconf/fconf.c				\
 				plat/arm/board/fvp/fconf/fconf_hw_config_getter.c
+
+ifeq (${SEC_INT_DESC_IN_FCONF},1)
+BL32_SOURCES		+=	plat/arm/common/fconf/fconf_sec_intr_config.c
+endif
+
 endif
 
 include plat/arm/common/sp_min/arm_sp_min.mk
diff --git a/plat/arm/common/fconf/fconf_sec_intr_config.c b/plat/arm/common/fconf/fconf_sec_intr_config.c
new file mode 100644
index 0000000..f28be24
--- /dev/null
+++ b/plat/arm/common/fconf/fconf_sec_intr_config.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <assert.h>
+
+#include <common/debug.h>
+#include <common/fdt_wrappers.h>
+#include <libfdt.h>
+#include <plat/arm/common/fconf_sec_intr_config.h>
+
+#define G0_INTR_NUM(i)		g0_intr_prop[3U * (i)]
+#define G0_INTR_PRIORITY(i)	g0_intr_prop[3U * (i) + 1]
+#define G0_INTR_CONFIG(i)	g0_intr_prop[3U * (i) + 2]
+
+#define G1S_INTR_NUM(i)		g1s_intr_prop[3U * (i)]
+#define G1S_INTR_PRIORITY(i)	g1s_intr_prop[3U * (i) + 1]
+#define G1S_INTR_CONFIG(i)	g1s_intr_prop[3U * (i) + 2]
+
+struct sec_intr_prop_t sec_intr_prop;
+
+static void print_intr_prop(interrupt_prop_t prop)
+{
+	VERBOSE("FCONF: Secure Interrupt NUM: %d, PRI: %d, TYPE: %d\n",
+		prop.intr_num, prop.intr_pri, prop.intr_cfg);
+}
+
+int fconf_populate_sec_intr_config(uintptr_t config)
+{
+	int node, err;
+	uint32_t g0_intr_count, g1s_intr_count;
+	uint32_t g0_intr_prop[SEC_INT_COUNT_MAX * 3];
+	uint32_t g1s_intr_prop[SEC_INT_COUNT_MAX * 3];
+
+	/* Necessary to work with libfdt APIs */
+	const void *hw_config_dtb = (const void *)config;
+
+	node = fdt_node_offset_by_compatible(hw_config_dtb, -1,
+						"arm,secure_interrupt_desc");
+	if (node < 0) {
+		ERROR("FCONF: Unable to locate node with %s compatible property\n",
+						"arm,secure_interrupt_desc");
+		return node;
+	}
+
+	/* Read number of Group 0 interrupts specified by platform */
+	err = fdt_read_uint32(hw_config_dtb, node, "g0_intr_cnt", &g0_intr_count);
+	if (err < 0) {
+		ERROR("FCONF: Could not locate g0s_intr_cnt property\n");
+		return err;
+	}
+
+	/* At least 1 Group 0 interrupt description has to be provided*/
+	if (g0_intr_count < 1U) {
+		ERROR("FCONF: Invalid number of Group 0 interrupts count specified\n");
+		return -1;
+	}
+
+	/* Read number of Group 1 secure interrupts specified by platform */
+	err = fdt_read_uint32(hw_config_dtb, node, "g1s_intr_cnt",
+				&g1s_intr_count);
+	if (err < 0) {
+		ERROR("FCONF: Could not locate g1s_intr_cnt property\n");
+		return err;
+	}
+
+	/* At least one Group 1 interrupt description has to be provided*/
+	if (g1s_intr_count < 1U) {
+		ERROR("FCONF: Invalid number of Group 1 secure interrupts count specified\n");
+		return -1;
+	}
+
+	/*
+	 * Check if the total number of secure interrupts described are within
+	 * the limit defined statically by the platform.
+	 */
+	if ((g0_intr_count + g1s_intr_count) > SEC_INT_COUNT_MAX) {
+		ERROR("FCONF: Total number of secure interrupts exceed limit the of %d\n",
+				SEC_INT_COUNT_MAX);
+		return -1;
+	}
+
+	sec_intr_prop.count = g0_intr_count + g1s_intr_count;
+
+	/* Read the Group 0 interrupt descriptors */
+	err = fdt_read_uint32_array(hw_config_dtb, node, "g0_intr_desc",
+				g0_intr_count * 3, g0_intr_prop);
+	if (err < 0) {
+		ERROR("FCONF: Read cell failed for 'g0s_intr_desc': %d\n", err);
+		return err;
+	}
+
+	/* Read the Group 1 secure interrupt descriptors */
+	err = fdt_read_uint32_array(hw_config_dtb, node, "g1s_intr_desc",
+				g1s_intr_count * 3, g1s_intr_prop);
+	if (err < 0) {
+		ERROR("FCONF: Read cell failed for 'g1s_intr_desc': %d\n", err);
+		return err;
+	}
+
+	/* Populate Group 0 interrupt descriptors into fconf based C struct */
+	for (uint32_t i = 0; i < g0_intr_count; i++) {
+		interrupt_prop_t sec_intr_property;
+
+		/* Secure Interrupt Group: INTR_GROUP0 i.e., 0x1 */
+		sec_intr_property.intr_grp = 1;
+		sec_intr_property.intr_num = G0_INTR_NUM(i);
+		sec_intr_property.intr_pri = G0_INTR_PRIORITY(i);
+		sec_intr_property.intr_cfg = G0_INTR_CONFIG(i);
+		sec_intr_prop.descriptor[i] = sec_intr_property;
+		print_intr_prop(sec_intr_property);
+	}
+
+	/* Populate G1 secure interrupt descriptors into fconf based C struct */
+	for (uint32_t i = 0; i < g1s_intr_count; i++) {
+		interrupt_prop_t sec_intr_property;
+
+		/* Secure Interrupt Group: INTR_GROUP1S i.e., 0x0 */
+		sec_intr_property.intr_grp = 0;
+		sec_intr_property.intr_num = G1S_INTR_NUM(i);
+		sec_intr_property.intr_pri = G1S_INTR_PRIORITY(i);
+		sec_intr_property.intr_cfg = G1S_INTR_CONFIG(i);
+		sec_intr_prop.descriptor[i + g0_intr_count] = sec_intr_property;
+		print_intr_prop(sec_intr_property);
+	}
+
+	return 0;
+}
+
+FCONF_REGISTER_POPULATOR(HW_CONFIG, sec_intr_prop, fconf_populate_sec_intr_config);