stm32mp1: Add support for SPI-NAND boot device
STM32MP1 platform is able to boot from SPI-NAND devices.
These modifications add this support using the new
SPI-NAND framework.
Change-Id: I0d5448bdc4bde153c1209e8043846c0f935ae5ba
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
diff --git a/plat/st/common/bl2_io_storage.c b/plat/st/common/bl2_io_storage.c
index e2629fa..d0bc605 100644
--- a/plat/st/common/bl2_io_storage.c
+++ b/plat/st/common/bl2_io_storage.c
@@ -19,9 +19,11 @@
#include <drivers/mmc.h>
#include <drivers/partition/partition.h>
#include <drivers/raw_nand.h>
+#include <drivers/spi_nand.h>
#include <drivers/st/io_mmc.h>
#include <drivers/st/io_stm32image.h>
#include <drivers/st/stm32_fmc2_nand.h>
+#include <drivers/st/stm32_qspi.h>
#include <drivers/st/stm32_sdmmc2.h>
#include <lib/mmio.h>
#include <lib/utils.h>
@@ -70,6 +72,17 @@
static const io_dev_connector_t *nand_dev_con;
#endif
+#if STM32MP_SPI_NAND
+static io_mtd_dev_spec_t spi_nand_dev_spec = {
+ .ops = {
+ .init = spi_nand_init,
+ .read = nand_read,
+ },
+};
+
+static const io_dev_connector_t *spi_dev_con;
+#endif
+
#ifdef AARCH32_SP_OPTEE
static const struct stm32image_part_info optee_header_partition_spec = {
.name = OPTEE_HEADER_IMAGE_NAME,
@@ -226,6 +239,9 @@
case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NAND_FMC:
INFO("Using FMC NAND\n");
break;
+ case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NAND_QSPI:
+ INFO("Using SPI NAND\n");
+ break;
default:
ERROR("Boot interface not found\n");
panic();
@@ -382,6 +398,60 @@
}
#endif /* STM32MP_RAW_NAND */
+#if STM32MP_SPI_NAND
+static void boot_spi_nand(boot_api_context_t *boot_context)
+{
+ int io_result __unused;
+ uint8_t idx;
+ struct stm32image_part_info *part;
+
+ io_result = stm32_qspi_init();
+ assert(io_result == 0);
+
+ io_result = register_io_dev_mtd(&spi_dev_con);
+ assert(io_result == 0);
+
+ /* Open connections to device */
+ io_result = io_dev_open(spi_dev_con,
+ (uintptr_t)&spi_nand_dev_spec,
+ &storage_dev_handle);
+ assert(io_result == 0);
+
+ stm32image_dev_info_spec.device_size =
+ spi_nand_dev_spec.device_size;
+
+ idx = IMG_IDX_BL33;
+ part = &stm32image_dev_info_spec.part_info[idx];
+ part->part_offset = STM32MP_NAND_BL33_OFFSET;
+ part->bkp_offset = spi_nand_dev_spec.erase_size;
+
+#ifdef AARCH32_SP_OPTEE
+ idx = IMG_IDX_OPTEE_HEADER;
+ part = &stm32image_dev_info_spec.part_info[idx];
+ part->part_offset = STM32MP_NAND_TEEH_OFFSET;
+ part->bkp_offset = spi_nand_dev_spec.erase_size;
+
+ idx = IMG_IDX_OPTEE_PAGED;
+ part = &stm32image_dev_info_spec.part_info[idx];
+ part->part_offset = STM32MP_NAND_TEED_OFFSET;
+ part->bkp_offset = spi_nand_dev_spec.erase_size;
+
+ idx = IMG_IDX_OPTEE_PAGER;
+ part = &stm32image_dev_info_spec.part_info[idx];
+ part->part_offset = STM32MP_NAND_TEEX_OFFSET;
+ part->bkp_offset = spi_nand_dev_spec.erase_size;
+#endif
+
+ io_result = register_io_dev_stm32image(&stm32image_dev_con);
+ assert(io_result == 0);
+
+ io_result = io_dev_open(stm32image_dev_con,
+ (uintptr_t)&stm32image_dev_info_spec,
+ &image_dev_handle);
+ assert(io_result == 0);
+}
+#endif /* STM32MP_SPI_NAND */
+
void stm32mp_io_setup(void)
{
int io_result __unused;
@@ -422,6 +492,12 @@
boot_fmc2_nand(boot_context);
break;
#endif
+#if STM32MP_SPI_NAND
+ case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NAND_QSPI:
+ dmbsy();
+ boot_spi_nand(boot_context);
+ break;
+#endif
default:
ERROR("Boot interface %d not supported\n",