diff --git a/include/export/README b/include/export/README
new file mode 100644
index 0000000..2de8d6b
--- /dev/null
+++ b/include/export/README
@@ -0,0 +1,33 @@
+All headers under include/export/ are export headers that are intended for
+inclusion in third-party code which needs to interact with TF-A data structures
+or interfaces. They must follow these special rules:
+
+- Header guards should start with ARM_TRUSTED_FIRMWARE_ to reduce clash risk.
+
+- All definitions should be sufficiently namespaced (e.g. with BL_ or TF_) to
+  make name clashes with third-party code unlikely.
+
+- They must not #include any headers except other export headers, and those
+  includes must use relative paths with "../double_quotes.h" notation.
+
+- They must not rely on any type definitions other that <stdint.h> types defined
+  in the ISO C standard (i.e. uint64_t is fine, but not u_register_t). They
+  should still not #include <stdint.h>. Instead, wrapper headers including
+  export headers need to ensure that they #include <stdint.h> earlier in their
+  include order.
+
+- They must not rely on any macro definitions other than those which are
+  pre-defined by all common compilers (e.g. __ASSEMBLER__ or __aarch64__).
+
+- They must only contain macro, type and structure definitions, no prototypes.
+
+- They should avoid using integer types with architecture-dependent widths
+  (e.g. long, uintptr_t, pointer types) where possible. (Some existing export
+  headers are violating this for now.)
+
+- Their names should always end in "_exp.h".
+
+- Normal TF-A code should never include export headers directly. Instead, it
+  should include a wrapper header that ensures the export header is included in
+  the right manner. (The wrapper header for include/export/x/y/z_exp.h should
+  normally be placed at include/x/y/z.h.)
diff --git a/include/export/common/bl_common_exp.h b/include/export/common/bl_common_exp.h
new file mode 100644
index 0000000..8f09017
--- /dev/null
+++ b/include/export/common/bl_common_exp.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_BL_COMMON_EXP_H
+#define ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_BL_COMMON_EXP_H
+
+/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */
+
+#include "ep_info_exp.h"
+#include "tbbr/tbbr_img_def_exp.h"
+
+/*
+ * The following are used for image state attributes.
+ * Image can only be in one of the following state.
+ */
+#define IMAGE_STATE_RESET		U(0)
+#define IMAGE_STATE_COPIED		U(1)
+#define IMAGE_STATE_COPYING		U(2)
+#define IMAGE_STATE_AUTHENTICATED	U(3)
+#define IMAGE_STATE_EXECUTED		U(4)
+#define IMAGE_STATE_INTERRUPTED		U(5)
+
+#define IMAGE_ATTRIB_SKIP_LOADING	U(0x02)
+#define IMAGE_ATTRIB_PLAT_SETUP		U(0x04)
+
+#define INVALID_IMAGE_ID		U(0xFFFFFFFF)
+
+#ifndef __ASSEMBLER__
+
+/*****************************************************************************
+ * Image info binary provides information from the image loader that
+ * can be used by the firmware to manage available trusted RAM.
+ * More advanced firmware image formats can provide additional
+ * information that enables optimization or greater flexibility in the
+ * common firmware code
+ *****************************************************************************/
+typedef struct image_info {
+	param_header_t h;
+	uintptr_t image_base;   /* physical address of base of image */
+	uint32_t image_size;    /* bytes read from image file */
+	uint32_t image_max_size;
+} image_info_t;
+
+/* BL image node in the BL image execution sequence */
+typedef struct bl_params_node {
+	unsigned int image_id;
+	image_info_t *image_info;
+	entry_point_info_t *ep_info;
+	struct bl_params_node *next_params_info;
+} bl_params_node_t;
+
+/*
+ * BL image head node in the BL image execution sequence
+ * It is also used to pass information to next BL image.
+ */
+typedef struct bl_params {
+	param_header_t h;
+	bl_params_node_t *head;
+} bl_params_t;
+
+/*****************************************************************************
+ * The image descriptor struct definition.
+ *****************************************************************************/
+typedef struct image_desc {
+	/* Contains unique image id for the image. */
+	unsigned int image_id;
+	/*
+	 * This member contains Image state information.
+	 * Refer IMAGE_STATE_XXX defined above.
+	 */
+	unsigned int state;
+	uint32_t copied_size;	/* image size copied in blocks */
+	image_info_t image_info;
+	entry_point_info_t ep_info;
+} image_desc_t;
+
+/* BL image node in the BL image loading sequence */
+typedef struct bl_load_info_node {
+	unsigned int image_id;
+	image_info_t *image_info;
+	struct bl_load_info_node *next_load_info;
+} bl_load_info_node_t;
+
+/* BL image head node in the BL image loading sequence */
+typedef struct bl_load_info {
+	param_header_t h;
+	bl_load_info_node_t *head;
+} bl_load_info_t;
+
+#endif /* __ASSEMBLER__ */
+
+#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_BL_COMMON_EXP_H */
diff --git a/include/export/common/ep_info_exp.h b/include/export/common/ep_info_exp.h
new file mode 100644
index 0000000..4c703e6
--- /dev/null
+++ b/include/export/common/ep_info_exp.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_EP_INFO_EXP_H
+#define ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_EP_INFO_EXP_H
+
+/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */
+
+#include "../lib/utils_def_exp.h"
+#include "param_header_exp.h"
+
+/*******************************************************************************
+ * Constants that allow assembler code to access members of and the
+ * 'entry_point_info' structure at their correct offsets.
+ ******************************************************************************/
+#define ENTRY_POINT_INFO_PC_OFFSET	U(0x08)
+#ifdef __aarch64__
+#define ENTRY_POINT_INFO_ARGS_OFFSET	U(0x18)
+#else
+#define ENTRY_POINT_INFO_LR_SVC_OFFSET	U(0x10)
+#define ENTRY_POINT_INFO_ARGS_OFFSET	U(0x14)
+#endif
+
+/* Security state of the image. */
+#define EP_SECURITY_MASK	U(0x1)
+#define EP_SECURITY_SHIFT	U(0)
+#define EP_SECURE		U(0x0)
+#define EP_NON_SECURE		U(0x1)
+
+/* Endianness of the image. */
+#define EP_EE_MASK		U(0x2)
+#define EP_EE_SHIFT		U(1)
+#define EP_EE_LITTLE		U(0x0)
+#define EP_EE_BIG		U(0x2)
+#define EP_GET_EE(x)		((x) & EP_EE_MASK)
+#define EP_SET_EE(x, ee)	((x) = ((x) & ~EP_EE_MASK) | (ee))
+
+/* Enable or disable access to the secure timer from secure images. */
+#define EP_ST_MASK		U(0x4)
+#define EP_ST_SHIFT		U(2)
+#define EP_ST_DISABLE		U(0x0)
+#define EP_ST_ENABLE		U(0x4)
+#define EP_GET_ST(x)		((x) & EP_ST_MASK)
+#define EP_SET_ST(x, ee)	((x) = ((x) & ~EP_ST_MASK) | (ee))
+
+/* Determine if an image is executable or not. */
+#define EP_EXE_MASK		U(0x8)
+#define EP_EXE_SHIFT		U(3)
+#define EP_NON_EXECUTABLE	U(0x0)
+#define EP_EXECUTABLE		U(0x8)
+#define EP_GET_EXE(x)		((x) & EP_EXE_MASK)
+#define EP_SET_EXE(x, ee)	((x) = ((x) & ~EP_EXE_MASK) | (ee))
+
+/* Flag to indicate the first image that is executed. */
+#define EP_FIRST_EXE_MASK	U(0x10)
+#define EP_FIRST_EXE_SHIFT	U(4)
+#define EP_FIRST_EXE		U(0x10)
+#define EP_GET_FIRST_EXE(x)	((x) & EP_FIRST_EXE_MASK)
+#define EP_SET_FIRST_EXE(x, ee)	((x) = ((x) & ~EP_FIRST_EXE_MASK) | (ee))
+
+#ifndef __ASSEMBLER__
+
+typedef struct aapcs64_params {
+	uint64_t arg0;
+	uint64_t arg1;
+	uint64_t arg2;
+	uint64_t arg3;
+	uint64_t arg4;
+	uint64_t arg5;
+	uint64_t arg6;
+	uint64_t arg7;
+} aapcs64_params_t;
+
+typedef struct aapcs32_params {
+	uint32_t arg0;
+	uint32_t arg1;
+	uint32_t arg2;
+	uint32_t arg3;
+} aapcs32_params_t;
+
+/*****************************************************************************
+ * This structure represents the superset of information needed while
+ * switching exception levels. The only two mechanisms to do so are
+ * ERET & SMC. Security state is indicated using bit zero of header
+ * attribute
+ * NOTE: BL1 expects entrypoint followed by spsr at an offset from the start
+ * of this structure defined by the macro `ENTRY_POINT_INFO_PC_OFFSET` while
+ * processing SMC to jump to BL31.
+ *****************************************************************************/
+typedef struct entry_point_info {
+	param_header_t h;
+	uintptr_t pc;
+	uint32_t spsr;
+#ifdef __aarch64__
+	aapcs64_params_t args;
+#else
+	uintptr_t lr_svc;
+	aapcs32_params_t args;
+#endif
+} entry_point_info_t;
+
+#endif /*__ASSEMBLER__*/
+
+#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_EP_INFO_EXP_H */
diff --git a/include/export/common/param_header_exp.h b/include/export/common/param_header_exp.h
new file mode 100644
index 0000000..15bb6f2
--- /dev/null
+++ b/include/export/common/param_header_exp.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_PARAM_HEADER_EXP_H
+#define ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_PARAM_HEADER_EXP_H
+
+/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */
+
+#include "../lib/utils_def_exp.h"
+
+/* Param header types */
+#define PARAM_EP			U(0x01)
+#define PARAM_IMAGE_BINARY		U(0x02)
+#define PARAM_BL31			U(0x03)
+#define PARAM_BL_LOAD_INFO		U(0x04)
+#define PARAM_BL_PARAMS			U(0x05)
+#define PARAM_PSCI_LIB_ARGS		U(0x06)
+#define PARAM_SP_IMAGE_BOOT_INFO	U(0x07)
+
+/* Param header version */
+#define PARAM_VERSION_1			U(0x01)
+#define PARAM_VERSION_2			U(0x02)
+
+#ifndef __ASSEMBLER__
+
+/***************************************************************************
+ * This structure provides version information and the size of the
+ * structure, attributes for the structure it represents
+ ***************************************************************************/
+typedef struct param_header {
+	uint8_t type;		/* type of the structure */
+	uint8_t version;	/* version of this structure */
+	uint16_t size;		/* size of this structure in bytes */
+	uint32_t attr;		/* attributes: unused bits SBZ */
+} param_header_t;
+
+#endif /*__ASSEMBLER__*/
+
+#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_PARAM_HEADER_EXP_H */
diff --git a/include/export/common/tbbr/tbbr_img_def_exp.h b/include/export/common/tbbr/tbbr_img_def_exp.h
new file mode 100644
index 0000000..ff0d16c
--- /dev/null
+++ b/include/export/common/tbbr/tbbr_img_def_exp.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_TBBR_TBBR_IMG_DEF_EXP_H
+#define ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_TBBR_TBBR_IMG_DEF_EXP_H
+
+/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */
+
+#include "../../lib/utils_def_exp.h"
+
+/* Firmware Image Package */
+#define FIP_IMAGE_ID			U(0)
+
+/* Trusted Boot Firmware BL2 */
+#define BL2_IMAGE_ID			U(1)
+
+/* SCP Firmware SCP_BL2 */
+#define SCP_BL2_IMAGE_ID		U(2)
+
+/* EL3 Runtime Firmware BL31 */
+#define BL31_IMAGE_ID			U(3)
+
+/* Secure Payload BL32 (Trusted OS) */
+#define BL32_IMAGE_ID			U(4)
+
+/* Non-Trusted Firmware BL33 */
+#define BL33_IMAGE_ID			U(5)
+
+/* Certificates */
+#define TRUSTED_BOOT_FW_CERT_ID		U(6)
+#define TRUSTED_KEY_CERT_ID		U(7)
+
+#define SCP_FW_KEY_CERT_ID		U(8)
+#define SOC_FW_KEY_CERT_ID		U(9)
+#define TRUSTED_OS_FW_KEY_CERT_ID	U(10)
+#define NON_TRUSTED_FW_KEY_CERT_ID	U(11)
+
+#define SCP_FW_CONTENT_CERT_ID		U(12)
+#define SOC_FW_CONTENT_CERT_ID		U(13)
+#define TRUSTED_OS_FW_CONTENT_CERT_ID	U(14)
+#define NON_TRUSTED_FW_CONTENT_CERT_ID	U(15)
+
+/* Non-Trusted ROM Firmware NS_BL1U */
+#define NS_BL1U_IMAGE_ID		U(16)
+
+/* Trusted FWU Certificate */
+#define FWU_CERT_ID			U(17)
+
+/* Trusted FWU SCP Firmware SCP_BL2U */
+#define SCP_BL2U_IMAGE_ID		U(18)
+
+/* Trusted FWU Boot Firmware BL2U */
+#define BL2U_IMAGE_ID			U(19)
+
+/* Non-Trusted FWU Firmware NS_BL2U */
+#define NS_BL2U_IMAGE_ID		U(20)
+
+/* Secure Payload BL32_EXTRA1 (Trusted OS Extra1) */
+#define BL32_EXTRA1_IMAGE_ID		U(21)
+
+/* Secure Payload BL32_EXTRA2 (Trusted OS Extra2) */
+#define BL32_EXTRA2_IMAGE_ID		U(22)
+
+/* HW_CONFIG (e.g. Kernel DT) */
+#define HW_CONFIG_ID			U(23)
+
+/* TB_FW_CONFIG */
+#define TB_FW_CONFIG_ID			U(24)
+
+/* SOC_FW_CONFIG */
+#define SOC_FW_CONFIG_ID		U(25)
+
+/* TOS_FW_CONFIG */
+#define TOS_FW_CONFIG_ID		U(26)
+
+/* NT_FW_CONFIG */
+#define NT_FW_CONFIG_ID			U(27)
+
+/* GPT Partition */
+#define GPT_IMAGE_ID			U(28)
+
+/* Binary with STM32 header */
+#define STM32_IMAGE_ID			U(29)
+
+/* Define size of the array */
+#define MAX_NUMBER_IDS			U(30)
+
+#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_TBBR_TBBR_IMG_DEF_EXP_H */
diff --git a/include/export/drivers/gpio_exp.h b/include/export/drivers/gpio_exp.h
new file mode 100644
index 0000000..a37f190
--- /dev/null
+++ b/include/export/drivers/gpio_exp.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_DRIVERS_GPIO_EXP_H
+#define ARM_TRUSTED_FIRMWARE_EXPORT_DRIVERS_GPIO_EXP_H
+
+/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */
+
+#define ARM_TF_GPIO_DIR_OUT		0
+#define ARM_TF_GPIO_DIR_IN		1
+
+#define ARM_TF_GPIO_LEVEL_LOW		0
+#define ARM_TF_GPIO_LEVEL_HIGH		1
+
+#define ARM_TF_GPIO_PULL_NONE		0
+#define ARM_TF_GPIO_PULL_UP		1
+#define ARM_TF_GPIO_PULL_DOWN		2
+
+#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_DRIVERS_GPIO_EXP_H */
diff --git a/include/export/lib/bl_aux_params/bl_aux_params_exp.h b/include/export/lib/bl_aux_params/bl_aux_params_exp.h
new file mode 100644
index 0000000..7391dec
--- /dev/null
+++ b/include/export/lib/bl_aux_params/bl_aux_params_exp.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_LIB_BL_AUX_PARAMS_EXP_H
+#define ARM_TRUSTED_FIRMWARE_EXPORT_LIB_BL_AUX_PARAMS_EXP_H
+
+/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */
+
+#include "../../drivers/gpio_exp.h"
+
+/*
+ * This API implements a lightweight parameter passing mechanism that can be
+ * used to pass SoC Firmware configuration data from BL2 to BL31 by platforms or
+ * configurations that do not want to depend on libfdt. It is structured as a
+ * singly-linked list of parameter structures that all share the same common
+ * header but may have different (and differently-sized) structure bodies after
+ * that. The header contains a type field to indicate the parameter type (which
+ * is used to infer the structure length and how to interpret its contents) and
+ * a next pointer which contains the absolute physical address of the next
+ * parameter structure. The next pointer in the last structure block is set to
+ * NULL. The picture below shows how the parameters are kept in memory.
+ *
+ * head of list  ---> +----------------+ --+
+ *                    |      type      |   |
+ *                    +----------------+   |--> struct bl_aux_param
+ *               +----|      next      |   |
+ *               |    +----------------+ --+
+ *               |    | parameter data |
+ *               |    +----------------+
+ *               |
+ *               +--> +----------------+ --+
+ *                    |      type      |   |
+ *                    +----------------+   |--> struct bl_aux_param
+ *           NULL <---|      next      |   |
+ *                    +----------------+ --+
+ *                    | parameter data |
+ *                    +----------------+
+ *
+ * Note: The SCTLR_EL3.A bit (Alignment fault check enable) is set in TF-A, so
+ * BL2 must ensure that each parameter struct starts on a 64-bit aligned address
+ * to avoid alignment faults. Parameters may be allocated in any address range
+ * accessible at the time of BL31 handoff (e.g. SRAM, DRAM, SoC-internal scratch
+ * registers, etc.), in particular address ranges that may not be mapped in
+ * BL31's page tables, so the parameter list must be parsed before the MMU is
+ * enabled and any information that is required at a later point should be
+ * deep-copied out into BL31-internal data structures.
+ */
+
+enum bl_aux_param_type {
+	BL_AUX_PARAM_NONE = 0,
+	BL_AUX_PARAM_VENDOR_SPECIFIC_FIRST = 0x1,
+	/* 0x1 - 0x7fffffff can be used by vendor-specific handlers. */
+	BL_AUX_PARAM_VENDOR_SPECIFIC_LAST = 0x7fffffff,
+	BL_AUX_PARAM_GENERIC_FIRST = 0x80000001,
+	BL_AUX_PARAM_COREBOOT_TABLE = BL_AUX_PARAM_GENERIC_FIRST,
+	/* 0x80000001 - 0xffffffff are reserved for the generic handler. */
+	BL_AUX_PARAM_GENERIC_LAST = 0xffffffff,
+	/* Top 32 bits of the type field are reserved for future use. */
+};
+
+/* common header for all BL aux parameters */
+struct bl_aux_param_header {
+	uint64_t type;
+	uint64_t next;
+};
+
+/* commonly useful parameter structures that can be shared by multiple types */
+struct bl_aux_param_uint64 {
+	struct bl_aux_param_header h;
+	uint64_t value;
+};
+
+struct bl_aux_gpio_info {
+	uint8_t polarity;
+	uint8_t direction;
+	uint8_t pull_mode;
+	uint8_t reserved;
+	uint32_t index;
+};
+
+struct bl_aux_param_gpio {
+	struct bl_aux_param_header h;
+	struct bl_aux_gpio_info gpio;
+};
+
+#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_LIB_BL_AUX_PARAMS_EXP_H */
diff --git a/include/export/lib/utils_def_exp.h b/include/export/lib/utils_def_exp.h
new file mode 100644
index 0000000..86c409c
--- /dev/null
+++ b/include/export/lib/utils_def_exp.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef	ARM_TRUSTED_FIRMWARE_EXPORT_LIB_UTILS_DEF_EXP_H
+#define	ARM_TRUSTED_FIRMWARE_EXPORT_LIB_UTILS_DEF_EXP_H
+
+/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */
+
+/*
+ * For those constants to be shared between C and other sources, apply a 'U',
+ * 'UL', 'ULL', 'L' or 'LL' suffix to the argument only in C, to avoid
+ * undefined or unintended behaviour.
+ *
+ * The GNU assembler and linker do not support these suffixes (it causes the
+ * build process to fail) therefore the suffix is omitted when used in linker
+ * scripts and assembler files.
+*/
+#if defined(__ASSEMBLER__)
+# define   U(_x)	(_x)
+# define  UL(_x)	(_x)
+# define ULL(_x)	(_x)
+# define   L(_x)	(_x)
+# define  LL(_x)	(_x)
+#else
+# define   U(_x)	(_x##U)
+# define  UL(_x)	(_x##UL)
+# define ULL(_x)	(_x##ULL)
+# define   L(_x)	(_x##L)
+# define  LL(_x)	(_x##LL)
+#endif
+
+#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_LIB_UTILS_DEF_EXP_H */
diff --git a/include/export/plat/rockchip/common/plat_params_exp.h b/include/export/plat/rockchip/common/plat_params_exp.h
new file mode 100644
index 0000000..ccc9cd9
--- /dev/null
+++ b/include/export/plat/rockchip/common/plat_params_exp.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_PLAT_ROCKCHIP_COMMON_PLAT_PARAMS_EXP_H
+#define ARM_TRUSTED_FIRMWARE_EXPORT_PLAT_ROCKCHIP_COMMON_PLAT_PARAMS_EXP_H
+
+/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */
+
+#include "../../../lib/bl_aux_params/bl_aux_params_exp.h"
+
+/* param type */
+enum bl_aux_rk_param_type {
+	BL_AUX_PARAM_RK_RESET_GPIO = BL_AUX_PARAM_VENDOR_SPECIFIC_FIRST,
+	BL_AUX_PARAM_RK_POWEROFF_GPIO,
+	BL_AUX_PARAM_RK_SUSPEND_GPIO,
+	BL_AUX_PARAM_RK_SUSPEND_APIO,
+};
+
+struct bl_aux_rk_apio_info {
+	uint8_t apio1 : 1;
+	uint8_t apio2 : 1;
+	uint8_t apio3 : 1;
+	uint8_t apio4 : 1;
+	uint8_t apio5 : 1;
+};
+
+struct bl_aux_param_rk_apio {
+	struct bl_aux_param_header h;
+	struct bl_aux_rk_apio_info apio;
+};
+
+#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_PLAT_ROCKCHIP_COMMON_PLAT_PARAMS_EXP_H */