plat: imx8mn: Add imx8mn basic support
Add imx8mn basic support
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ibdfcc87700bfaf980e429f3a5fa08515218ae78d
diff --git a/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c b/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
new file mode 100644
index 0000000..d4705ee
--- /dev/null
+++ b/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2019-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdbool.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <context.h>
+#include <drivers/arm/tzc380.h>
+#include <drivers/console.h>
+#include <drivers/generic_delay_timer.h>
+#include <lib/el3_runtime/context_mgmt.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <plat/common/platform.h>
+
+#include <gpc.h>
+#include <imx_aipstz.h>
+#include <imx_uart.h>
+#include <imx_rdc.h>
+#include <imx8m_caam.h>
+#include <platform_def.h>
+#include <plat_imx8.h>
+
+static const mmap_region_t imx_mmap[] = {
+ GIC_MAP, AIPS_MAP, OCRAM_S_MAP, DDRC_MAP, {0},
+};
+
+static const struct aipstz_cfg aipstz[] = {
+ {IMX_AIPSTZ1, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
+ {IMX_AIPSTZ2, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
+ {IMX_AIPSTZ3, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
+ {IMX_AIPSTZ4, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
+ {0},
+};
+
+static const struct imx_rdc_cfg rdc[] = {
+ /* Master domain assignment */
+ RDC_MDAn(0x1, DID1),
+
+ /* peripherals domain permission */
+
+ /* memory region */
+ RDC_MEM_REGIONn(16, 0x0, 0x0, 0xff),
+ RDC_MEM_REGIONn(17, 0x0, 0x0, 0xff),
+ RDC_MEM_REGIONn(18, 0x0, 0x0, 0xff),
+
+ /* Sentinel */
+ {0},
+};
+
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+/* get SPSR for BL33 entry */
+static uint32_t get_spsr_for_bl33_entry(void)
+{
+ unsigned long el_status;
+ unsigned long mode;
+ uint32_t spsr;
+
+ /* figure out what mode we enter the non-secure world */
+ el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+ el_status &= ID_AA64PFR0_ELX_MASK;
+
+ mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+ spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+ return spsr;
+}
+
+static void bl31_tzc380_setup(void)
+{
+ unsigned int val;
+
+ val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x28);
+ if ((val & GPR_TZASC_EN) != GPR_TZASC_EN)
+ return;
+
+ tzc380_init(IMX_TZASC_BASE);
+
+ /*
+ * Need to substact offset 0x40000000 from CPU address when
+ * programming tzasc region for i.mx8mn.
+ */
+
+ /* Enable 1G-5G S/NS RW */
+ tzc380_configure_region(0, 0x00000000, TZC_ATTR_REGION_SIZE(TZC_REGION_SIZE_4G) |
+ TZC_ATTR_REGION_EN_MASK | TZC_ATTR_SP_ALL);
+}
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+{
+ static console_t console;
+ int i;
+
+ /* Enable CSU NS access permission */
+ for (i = 0; i < 64; i++) {
+ mmio_write_32(IMX_CSU_BASE + i * 4, 0x00ff00ff);
+ }
+
+ imx_aipstz_init(aipstz);
+
+ imx_rdc_init(rdc);
+
+ imx8m_caam_init();
+
+ console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
+ IMX_CONSOLE_BAUDRATE, &console);
+ /* This console is only used for boot stage */
+ console_set_scope(&console, CONSOLE_FLAG_BOOT);
+
+ /*
+ * tell BL3-1 where the non-secure software image is located
+ * and the entry state information.
+ */
+ bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET;
+ bl33_image_ep_info.spsr = get_spsr_for_bl33_entry();
+ SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+#ifdef SPD_opteed
+ /* Populate entry point information for BL32 */
+ SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0);
+ SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+ bl32_image_ep_info.pc = BL32_BASE;
+ bl32_image_ep_info.spsr = 0;
+
+ /* Pass TEE base and size to bl33 */
+ bl33_image_ep_info.args.arg1 = BL32_BASE;
+ bl33_image_ep_info.args.arg2 = BL32_SIZE;
+#endif
+
+ bl31_tzc380_setup();
+}
+
+void bl31_plat_arch_setup(void)
+{
+ mmap_add_region(BL31_BASE, BL31_BASE, (BL31_LIMIT - BL31_BASE),
+ MT_MEMORY | MT_RW | MT_SECURE);
+ mmap_add_region(BL_CODE_BASE, BL_CODE_BASE, (BL_CODE_END - BL_CODE_BASE),
+ MT_MEMORY | MT_RO | MT_SECURE);
+#if USE_COHERENT_MEM
+ mmap_add_region(BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_BASE,
+ (BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE),
+ MT_DEVICE | MT_RW | MT_SECURE);
+#endif
+ mmap_add(imx_mmap);
+
+ init_xlat_tables();
+
+ enable_mmu_el3(0);
+}
+
+void bl31_platform_setup(void)
+{
+ generic_delay_timer_init();
+
+ /* select the CKIL source to 32K OSC */
+ mmio_write_32(IMX_ANAMIX_BASE + ANAMIX_MISC_CTL, 0x1);
+
+ plat_gic_driver_init();
+ plat_gic_init();
+
+ imx_gpc_init();
+}
+
+entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type)
+{
+ if (type == NON_SECURE)
+ return &bl33_image_ep_info;
+ if (type == SECURE)
+ return &bl32_image_ep_info;
+
+ return NULL;
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+ return COUNTER_FREQUENCY;
+}