diff --git a/plat/brcm/board/common/bcm_console.c b/plat/brcm/board/common/bcm_console.c
new file mode 100644
index 0000000..d484a6f
--- /dev/null
+++ b/plat/brcm/board/common/bcm_console.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <drivers/ti/uart/uart_16550.h>
+
+#include <platform_def.h>
+
+/*******************************************************************************
+ * Functions that set up the console
+ ******************************************************************************/
+static console_t bcm_boot_console;
+static console_t bcm_runtime_console;
+
+/* Initialize the console to provide early debug support */
+void bcm_console_boot_init(void)
+{
+	int rc = console_16550_register(PLAT_BRCM_BOOT_UART_BASE,
+					PLAT_BRCM_BOOT_UART_CLK_IN_HZ,
+					BRCM_CONSOLE_BAUDRATE,
+					&bcm_boot_console);
+	if (rc == 0) {
+		/*
+		 * The crash console doesn't use the multi console API, it uses
+		 * the core console functions directly. It is safe to call panic
+		 * and let it print debug information.
+		 */
+		panic();
+	}
+
+	console_set_scope(&bcm_boot_console, CONSOLE_FLAG_BOOT);
+}
+
+void bcm_console_boot_end(void)
+{
+	(void)console_flush();
+
+	(void)console_unregister(&bcm_boot_console);
+}
+
+/* Initialize the runtime console */
+void bcm_console_runtime_init(void)
+{
+	int rc = console_16550_register(PLAT_BRCM_BL31_RUN_UART_BASE,
+					PLAT_BRCM_BL31_RUN_UART_CLK_IN_HZ,
+					BRCM_CONSOLE_BAUDRATE,
+					&bcm_runtime_console);
+	if (rc == 0)
+		panic();
+
+	console_set_scope(&bcm_runtime_console, CONSOLE_FLAG_RUNTIME);
+}
+
+void bcm_console_runtime_end(void)
+{
+	(void)console_flush();
+
+	(void)console_unregister(&bcm_runtime_console);
+}
diff --git a/plat/brcm/board/common/board_common.c b/plat/brcm/board/common/board_common.c
new file mode 100644
index 0000000..e7b5e47
--- /dev/null
+++ b/plat/brcm/board/common/board_common.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <brcm_def.h>
+#include <plat_brcm.h>
+
+#if IMAGE_BL2
+const mmap_region_t plat_brcm_mmap[] = {
+	HSLS_REGION,
+	BRCM_MAP_SHARED_RAM,
+	BRCM_MAP_NAND_RO,
+	BRCM_MAP_QSPI_RO,
+#ifdef PERIPH0_REGION
+	PERIPH0_REGION,
+#endif
+#ifdef PERIPH1_REGION
+	PERIPH1_REGION,
+#endif
+#ifdef USE_DDR
+	BRCM_MAP_NS_DRAM1,
+#if BRCM_BL31_IN_DRAM
+	BRCM_MAP_BL31_SEC_DRAM,
+#endif
+#else
+#ifdef BRCM_MAP_EXT_SRAM
+	BRCM_MAP_EXT_SRAM,
+#endif
+#endif
+#if defined(USE_CRMU_SRAM) && defined(CRMU_SRAM_BASE)
+	CRMU_SRAM_REGION,
+#endif
+	{0}
+};
+#endif
+
+CASSERT((ARRAY_SIZE(plat_brcm_mmap) - 1) <= PLAT_BRCM_MMAP_ENTRIES,
+	assert_plat_brcm_mmap_mismatch);
+CASSERT((PLAT_BRCM_MMAP_ENTRIES + BRCM_BL_REGIONS) <= MAX_MMAP_REGIONS,
+	assert_max_mmap_regions);
diff --git a/plat/brcm/board/common/board_common.mk b/plat/brcm/board/common/board_common.mk
new file mode 100644
index 0000000..9ac26af
--- /dev/null
+++ b/plat/brcm/board/common/board_common.mk
@@ -0,0 +1,82 @@
+#
+# Copyright (c) 2015 - 2020, Broadcom
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+PLAT_BL_COMMON_SOURCES	+=	plat/brcm/board/common/board_common.c
+
+# If no board config makefile, do not include it
+ifneq (${BOARD_CFG},)
+BOARD_CFG_MAKE := $(shell find plat/brcm/board/${PLAT} -name '${BOARD_CFG}.mk')
+$(eval $(call add_define,BOARD_CFG))
+ifneq (${BOARD_CFG_MAKE},)
+$(info Including ${BOARD_CFG_MAKE})
+include ${BOARD_CFG_MAKE}
+else
+$(error Error: File ${BOARD_CFG}.mk not found in plat/brcm/board/${PLAT})
+endif
+endif
+
+# To compile with highest log level (VERBOSE) set value to 50
+LOG_LEVEL := 40
+
+# Use custom generic timer clock
+ifneq (${GENTIMER_ACTUAL_CLOCK},)
+$(info Using GENTIMER_ACTUAL_CLOCK=$(GENTIMER_ACTUAL_CLOCK))
+SYSCNT_FREQ := $(GENTIMER_ACTUAL_CLOCK)
+$(eval $(call add_define,SYSCNT_FREQ))
+endif
+
+ifeq (${STANDALONE_BL2},yes)
+$(eval $(call add_define,MMU_DISABLED))
+endif
+
+# BL2 XIP from QSPI
+RUN_BL2_FROM_QSPI := 0
+ifeq (${RUN_BL2_FROM_QSPI},1)
+$(eval $(call add_define,RUN_BL2_FROM_QSPI))
+endif
+
+# Use CRMU SRAM from iHOST
+ifneq (${USE_CRMU_SRAM},)
+$(eval $(call add_define,USE_CRMU_SRAM))
+endif
+
+# On BRCM platforms, separate the code and read-only data sections to allow
+# mapping the former as executable and the latter as execute-never.
+SEPARATE_CODE_AND_RODATA	:=	1
+
+# Use generic OID definition (tbbr_oid.h)
+USE_TBBR_DEFS			:=	1
+
+PLAT_INCLUDES		+=	-Iplat/brcm/board/common
+
+PLAT_BL_COMMON_SOURCES	+=	plat/brcm/common/brcm_common.c \
+				plat/brcm/board/common/cmn_sec.c \
+				plat/brcm/board/common/bcm_console.c \
+				plat/brcm/board/common/plat_setup.c \
+				plat/brcm/board/common/platform_common.c \
+				drivers/arm/sp804/sp804_delay_timer.c \
+				drivers/delay_timer/delay_timer.c \
+				drivers/io/io_fip.c \
+				drivers/io/io_memmap.c \
+				drivers/io/io_storage.c \
+				plat/brcm/common/brcm_io_storage.c \
+				plat/brcm/board/common/err.c \
+				drivers/arm/sp805/sp805.c
+
+BL2_SOURCES		+=	plat/brcm/common/brcm_bl2_mem_params_desc.c \
+				plat/brcm/common/brcm_image_load.c \
+				common/desc_image_load.c
+
+BL2_SOURCES		+= 	plat/brcm/common/brcm_bl2_setup.c
+
+# Use translation tables library v1 by default
+ARM_XLAT_TABLES_LIB_V1		:=	1
+ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
+$(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1))
+$(eval $(call add_define,ARM_XLAT_TABLES_LIB_V1))
+PLAT_BL_COMMON_SOURCES	+=	lib/xlat_tables/aarch64/xlat_tables.c \
+				lib/xlat_tables/xlat_tables_common.c
+endif
diff --git a/plat/brcm/board/common/cmn_plat_def.h b/plat/brcm/board/common/cmn_plat_def.h
new file mode 100644
index 0000000..41d9222
--- /dev/null
+++ b/plat/brcm/board/common/cmn_plat_def.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CMN_PLAT_DEF_H
+#define CMN_PLAT_DEF_H
+
+/* Print file and line number on assert */
+#define PLAT_LOG_LEVEL_ASSERT LOG_LEVEL_INFO
+
+/*
+ * The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+#if USE_COHERENT_MEM
+#define CMN_BL_REGIONS	3
+#else
+#define CMN_BL_REGIONS	2
+#endif
+
+/*
+ * FIP definitions
+ */
+#define PLAT_FIP_ATTEMPT_OFFSET		0x20000
+#define PLAT_FIP_NUM_ATTEMPTS		128
+
+#define PLAT_BRCM_FIP_QSPI_BASE		QSPI_BASE_ADDR
+#define PLAT_BRCM_FIP_NAND_BASE		NAND_BASE_ADDR
+#define PLAT_BRCM_FIP_MAX_SIZE		0x01000000
+
+#define PLAT_BRCM_FIP_BASE	PLAT_BRCM_FIP_QSPI_BASE
+#endif
diff --git a/plat/brcm/board/common/cmn_plat_util.h b/plat/brcm/board/common/cmn_plat_util.h
new file mode 100644
index 0000000..178c843
--- /dev/null
+++ b/plat/brcm/board/common/cmn_plat_util.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CMN_PLAT_UTIL_H
+#define CMN_PLAT_UTIL_H
+
+#include <lib/mmio.h>
+
+/* BOOT source */
+#define BOOT_SOURCE_MASK	7
+#define BOOT_SOURCE_QSPI	0
+#define BOOT_SOURCE_NAND	1
+#define BOOT_SOURCE_SPI_NAND	2
+#define BOOT_SOURCE_UART	3
+#define BOOT_SOURCE_RES4	4
+#define BOOT_SOURCE_EMMC	5
+#define BOOT_SOURCE_ATE		6
+#define BOOT_SOURCE_USB		7
+#define BOOT_SOURCE_MAX		8
+#define BOOT_SOURCE_UNKNOWN	(-1)
+
+#define KHMAC_SHA256_KEY_SIZE	32
+
+#define SOFT_PWR_UP_RESET_L0	0
+#define SOFT_SYS_RESET_L1	1
+#define SOFT_RESET_L3		0x3
+
+#define BOOT_SOURCE_SOFT_DATA_OFFSET	8
+#define BOOT_SOURCE_SOFT_ENABLE_OFFSET	14
+#define BOOT_SOURCE_SOFT_ENABLE_MASK	BIT(BOOT_SOURCE_SOFT_ENABLE_OFFSET)
+
+typedef struct _key {
+	uint8_t  hmac_sha256[KHMAC_SHA256_KEY_SIZE];
+} cmn_key_t;
+
+uint32_t boot_source_get(void);
+void bl1_platform_wait_events(void);
+void plat_soft_reset(uint32_t reset);
+
+#endif
diff --git a/plat/brcm/board/common/cmn_sec.c b/plat/brcm/board/common/cmn_sec.c
new file mode 100644
index 0000000..c80d5dd
--- /dev/null
+++ b/plat/brcm/board/common/cmn_sec.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <cmn_sec.h>
+
+#pragma weak plat_tz_master_default_cfg
+#pragma weak plat_tz_sdio_ns_master_set
+#pragma weak plat_tz_usb_ns_master_set
+
+void plat_tz_master_default_cfg(void)
+{
+	/* This function should be implemented in the platform side. */
+	ERROR("%s: TZ CONFIGURATION NOT SET!!!\n", __func__);
+}
+
+void plat_tz_sdio_ns_master_set(uint32_t ns)
+{
+	/* This function should be implemented in the platform side. */
+	ERROR("%s: TZ CONFIGURATION NOT SET!!!\n", __func__);
+}
+
+void plat_tz_usb_ns_master_set(uint32_t ns)
+{
+	/* This function should be implemented in the platform side. */
+	ERROR("%s: TZ CONFIGURATION NOT SET!!!\n", __func__);
+}
+
+void tz_master_default_cfg(void)
+{
+	plat_tz_master_default_cfg();
+}
+
+void tz_sdio_ns_master_set(uint32_t ns)
+{
+	plat_tz_sdio_ns_master_set(ns);
+}
+
+void tz_usb_ns_master_set(uint32_t ns)
+{
+	plat_tz_usb_ns_master_set(ns);
+}
diff --git a/plat/brcm/board/common/cmn_sec.h b/plat/brcm/board/common/cmn_sec.h
new file mode 100644
index 0000000..f74863d
--- /dev/null
+++ b/plat/brcm/board/common/cmn_sec.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CMN_SEC_H
+#define CMN_SEC_H
+
+#include <stdint.h>
+
+#define SECURE_MASTER 0
+#define NS_MASTER 1
+
+void tz_master_default_cfg(void);
+void tz_usb_ns_master_set(uint32_t ns);
+void tz_sdio_ns_master_set(uint32_t ns);
+
+#endif
diff --git a/plat/brcm/board/common/err.c b/plat/brcm/board/common/err.c
new file mode 100644
index 0000000..1fc73c4
--- /dev/null
+++ b/plat/brcm/board/common/err.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <lib/mmio.h>
+
+#include <platform_def.h>
+
+#define L0_RESET 0x2
+
+/*
+ * Brcm error handler
+ */
+void plat_error_handler(int err)
+{
+	INFO("L0 reset...\n");
+
+	/* Ensure the characters are flushed out */
+	console_flush();
+
+	mmio_write_32(CRMU_SOFT_RESET_CTRL, L0_RESET);
+
+	/*
+	 * In case we get here:
+	 * Loop until the watchdog resets the system
+	 */
+	while (1) {
+		wfi();
+	}
+}
diff --git a/plat/brcm/board/common/plat_setup.c b/plat/brcm/board/common/plat_setup.c
new file mode 100644
index 0000000..95e12ed
--- /dev/null
+++ b/plat/brcm/board/common/plat_setup.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+/*
+ * This function returns the fixed clock frequency at which private
+ * timers run. This value will be programmed into CNTFRQ_EL0.
+ */
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return SYSCNT_FREQ;
+}
+
+static const char * const plat_prefix_str[] = {
+	"E: ", "N: ", "W: ", "I: ", "V: "
+};
+
+const char *plat_log_get_prefix(unsigned int log_level)
+{
+	return plat_prefix_str[log_level - 1U];
+}
diff --git a/plat/brcm/board/common/platform_common.c b/plat/brcm/board/common/platform_common.c
new file mode 100644
index 0000000..9bae83a
--- /dev/null
+++ b/plat/brcm/board/common/platform_common.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+
+#include <cmn_plat_util.h>
+#include <platform_def.h>
+
+uint32_t boot_source_get(void)
+{
+	/* For now return BOOT_SOURCE_QSPI */
+	return BOOT_SOURCE_QSPI;
+}
+
+void __dead2 plat_soft_reset(uint32_t reset)
+{
+	if (reset == SOFT_RESET_L3) {
+		mmio_setbits_32(CRMU_IHOST_SW_PERSISTENT_REG1, reset);
+		mmio_write_32(CRMU_MAIL_BOX0, 0x0);
+		mmio_write_32(CRMU_MAIL_BOX1, 0xFFFFFFFF);
+	}
+
+	if (reset != SOFT_SYS_RESET_L1)
+		reset = SOFT_PWR_UP_RESET_L0;
+
+	if (reset == SOFT_PWR_UP_RESET_L0)
+		INFO("L0 RESET...\n");
+
+	if (reset == SOFT_SYS_RESET_L1)
+		INFO("L1 RESET...\n");
+
+	console_flush();
+
+	mmio_clrbits_32(CRMU_SOFT_RESET_CTRL, 1 << reset);
+
+	while (1) {
+		;
+	}
+}