diff --git a/plat/brcm/board/common/bcm_console.c b/plat/brcm/board/common/bcm_console.c
new file mode 100644
index 0000000..d484a6f
--- /dev/null
+++ b/plat/brcm/board/common/bcm_console.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <drivers/ti/uart/uart_16550.h>
+
+#include <platform_def.h>
+
+/*******************************************************************************
+ * Functions that set up the console
+ ******************************************************************************/
+static console_t bcm_boot_console;
+static console_t bcm_runtime_console;
+
+/* Initialize the console to provide early debug support */
+void bcm_console_boot_init(void)
+{
+	int rc = console_16550_register(PLAT_BRCM_BOOT_UART_BASE,
+					PLAT_BRCM_BOOT_UART_CLK_IN_HZ,
+					BRCM_CONSOLE_BAUDRATE,
+					&bcm_boot_console);
+	if (rc == 0) {
+		/*
+		 * The crash console doesn't use the multi console API, it uses
+		 * the core console functions directly. It is safe to call panic
+		 * and let it print debug information.
+		 */
+		panic();
+	}
+
+	console_set_scope(&bcm_boot_console, CONSOLE_FLAG_BOOT);
+}
+
+void bcm_console_boot_end(void)
+{
+	(void)console_flush();
+
+	(void)console_unregister(&bcm_boot_console);
+}
+
+/* Initialize the runtime console */
+void bcm_console_runtime_init(void)
+{
+	int rc = console_16550_register(PLAT_BRCM_BL31_RUN_UART_BASE,
+					PLAT_BRCM_BL31_RUN_UART_CLK_IN_HZ,
+					BRCM_CONSOLE_BAUDRATE,
+					&bcm_runtime_console);
+	if (rc == 0)
+		panic();
+
+	console_set_scope(&bcm_runtime_console, CONSOLE_FLAG_RUNTIME);
+}
+
+void bcm_console_runtime_end(void)
+{
+	(void)console_flush();
+
+	(void)console_unregister(&bcm_runtime_console);
+}
diff --git a/plat/brcm/board/common/board_common.c b/plat/brcm/board/common/board_common.c
new file mode 100644
index 0000000..e7b5e47
--- /dev/null
+++ b/plat/brcm/board/common/board_common.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <brcm_def.h>
+#include <plat_brcm.h>
+
+#if IMAGE_BL2
+const mmap_region_t plat_brcm_mmap[] = {
+	HSLS_REGION,
+	BRCM_MAP_SHARED_RAM,
+	BRCM_MAP_NAND_RO,
+	BRCM_MAP_QSPI_RO,
+#ifdef PERIPH0_REGION
+	PERIPH0_REGION,
+#endif
+#ifdef PERIPH1_REGION
+	PERIPH1_REGION,
+#endif
+#ifdef USE_DDR
+	BRCM_MAP_NS_DRAM1,
+#if BRCM_BL31_IN_DRAM
+	BRCM_MAP_BL31_SEC_DRAM,
+#endif
+#else
+#ifdef BRCM_MAP_EXT_SRAM
+	BRCM_MAP_EXT_SRAM,
+#endif
+#endif
+#if defined(USE_CRMU_SRAM) && defined(CRMU_SRAM_BASE)
+	CRMU_SRAM_REGION,
+#endif
+	{0}
+};
+#endif
+
+CASSERT((ARRAY_SIZE(plat_brcm_mmap) - 1) <= PLAT_BRCM_MMAP_ENTRIES,
+	assert_plat_brcm_mmap_mismatch);
+CASSERT((PLAT_BRCM_MMAP_ENTRIES + BRCM_BL_REGIONS) <= MAX_MMAP_REGIONS,
+	assert_max_mmap_regions);
diff --git a/plat/brcm/board/common/board_common.mk b/plat/brcm/board/common/board_common.mk
new file mode 100644
index 0000000..9ac26af
--- /dev/null
+++ b/plat/brcm/board/common/board_common.mk
@@ -0,0 +1,82 @@
+#
+# Copyright (c) 2015 - 2020, Broadcom
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+PLAT_BL_COMMON_SOURCES	+=	plat/brcm/board/common/board_common.c
+
+# If no board config makefile, do not include it
+ifneq (${BOARD_CFG},)
+BOARD_CFG_MAKE := $(shell find plat/brcm/board/${PLAT} -name '${BOARD_CFG}.mk')
+$(eval $(call add_define,BOARD_CFG))
+ifneq (${BOARD_CFG_MAKE},)
+$(info Including ${BOARD_CFG_MAKE})
+include ${BOARD_CFG_MAKE}
+else
+$(error Error: File ${BOARD_CFG}.mk not found in plat/brcm/board/${PLAT})
+endif
+endif
+
+# To compile with highest log level (VERBOSE) set value to 50
+LOG_LEVEL := 40
+
+# Use custom generic timer clock
+ifneq (${GENTIMER_ACTUAL_CLOCK},)
+$(info Using GENTIMER_ACTUAL_CLOCK=$(GENTIMER_ACTUAL_CLOCK))
+SYSCNT_FREQ := $(GENTIMER_ACTUAL_CLOCK)
+$(eval $(call add_define,SYSCNT_FREQ))
+endif
+
+ifeq (${STANDALONE_BL2},yes)
+$(eval $(call add_define,MMU_DISABLED))
+endif
+
+# BL2 XIP from QSPI
+RUN_BL2_FROM_QSPI := 0
+ifeq (${RUN_BL2_FROM_QSPI},1)
+$(eval $(call add_define,RUN_BL2_FROM_QSPI))
+endif
+
+# Use CRMU SRAM from iHOST
+ifneq (${USE_CRMU_SRAM},)
+$(eval $(call add_define,USE_CRMU_SRAM))
+endif
+
+# On BRCM platforms, separate the code and read-only data sections to allow
+# mapping the former as executable and the latter as execute-never.
+SEPARATE_CODE_AND_RODATA	:=	1
+
+# Use generic OID definition (tbbr_oid.h)
+USE_TBBR_DEFS			:=	1
+
+PLAT_INCLUDES		+=	-Iplat/brcm/board/common
+
+PLAT_BL_COMMON_SOURCES	+=	plat/brcm/common/brcm_common.c \
+				plat/brcm/board/common/cmn_sec.c \
+				plat/brcm/board/common/bcm_console.c \
+				plat/brcm/board/common/plat_setup.c \
+				plat/brcm/board/common/platform_common.c \
+				drivers/arm/sp804/sp804_delay_timer.c \
+				drivers/delay_timer/delay_timer.c \
+				drivers/io/io_fip.c \
+				drivers/io/io_memmap.c \
+				drivers/io/io_storage.c \
+				plat/brcm/common/brcm_io_storage.c \
+				plat/brcm/board/common/err.c \
+				drivers/arm/sp805/sp805.c
+
+BL2_SOURCES		+=	plat/brcm/common/brcm_bl2_mem_params_desc.c \
+				plat/brcm/common/brcm_image_load.c \
+				common/desc_image_load.c
+
+BL2_SOURCES		+= 	plat/brcm/common/brcm_bl2_setup.c
+
+# Use translation tables library v1 by default
+ARM_XLAT_TABLES_LIB_V1		:=	1
+ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
+$(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1))
+$(eval $(call add_define,ARM_XLAT_TABLES_LIB_V1))
+PLAT_BL_COMMON_SOURCES	+=	lib/xlat_tables/aarch64/xlat_tables.c \
+				lib/xlat_tables/xlat_tables_common.c
+endif
diff --git a/plat/brcm/board/common/cmn_plat_def.h b/plat/brcm/board/common/cmn_plat_def.h
new file mode 100644
index 0000000..41d9222
--- /dev/null
+++ b/plat/brcm/board/common/cmn_plat_def.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CMN_PLAT_DEF_H
+#define CMN_PLAT_DEF_H
+
+/* Print file and line number on assert */
+#define PLAT_LOG_LEVEL_ASSERT LOG_LEVEL_INFO
+
+/*
+ * The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+#if USE_COHERENT_MEM
+#define CMN_BL_REGIONS	3
+#else
+#define CMN_BL_REGIONS	2
+#endif
+
+/*
+ * FIP definitions
+ */
+#define PLAT_FIP_ATTEMPT_OFFSET		0x20000
+#define PLAT_FIP_NUM_ATTEMPTS		128
+
+#define PLAT_BRCM_FIP_QSPI_BASE		QSPI_BASE_ADDR
+#define PLAT_BRCM_FIP_NAND_BASE		NAND_BASE_ADDR
+#define PLAT_BRCM_FIP_MAX_SIZE		0x01000000
+
+#define PLAT_BRCM_FIP_BASE	PLAT_BRCM_FIP_QSPI_BASE
+#endif
diff --git a/plat/brcm/board/common/cmn_plat_util.h b/plat/brcm/board/common/cmn_plat_util.h
new file mode 100644
index 0000000..178c843
--- /dev/null
+++ b/plat/brcm/board/common/cmn_plat_util.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CMN_PLAT_UTIL_H
+#define CMN_PLAT_UTIL_H
+
+#include <lib/mmio.h>
+
+/* BOOT source */
+#define BOOT_SOURCE_MASK	7
+#define BOOT_SOURCE_QSPI	0
+#define BOOT_SOURCE_NAND	1
+#define BOOT_SOURCE_SPI_NAND	2
+#define BOOT_SOURCE_UART	3
+#define BOOT_SOURCE_RES4	4
+#define BOOT_SOURCE_EMMC	5
+#define BOOT_SOURCE_ATE		6
+#define BOOT_SOURCE_USB		7
+#define BOOT_SOURCE_MAX		8
+#define BOOT_SOURCE_UNKNOWN	(-1)
+
+#define KHMAC_SHA256_KEY_SIZE	32
+
+#define SOFT_PWR_UP_RESET_L0	0
+#define SOFT_SYS_RESET_L1	1
+#define SOFT_RESET_L3		0x3
+
+#define BOOT_SOURCE_SOFT_DATA_OFFSET	8
+#define BOOT_SOURCE_SOFT_ENABLE_OFFSET	14
+#define BOOT_SOURCE_SOFT_ENABLE_MASK	BIT(BOOT_SOURCE_SOFT_ENABLE_OFFSET)
+
+typedef struct _key {
+	uint8_t  hmac_sha256[KHMAC_SHA256_KEY_SIZE];
+} cmn_key_t;
+
+uint32_t boot_source_get(void);
+void bl1_platform_wait_events(void);
+void plat_soft_reset(uint32_t reset);
+
+#endif
diff --git a/plat/brcm/board/common/cmn_sec.c b/plat/brcm/board/common/cmn_sec.c
new file mode 100644
index 0000000..c80d5dd
--- /dev/null
+++ b/plat/brcm/board/common/cmn_sec.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <cmn_sec.h>
+
+#pragma weak plat_tz_master_default_cfg
+#pragma weak plat_tz_sdio_ns_master_set
+#pragma weak plat_tz_usb_ns_master_set
+
+void plat_tz_master_default_cfg(void)
+{
+	/* This function should be implemented in the platform side. */
+	ERROR("%s: TZ CONFIGURATION NOT SET!!!\n", __func__);
+}
+
+void plat_tz_sdio_ns_master_set(uint32_t ns)
+{
+	/* This function should be implemented in the platform side. */
+	ERROR("%s: TZ CONFIGURATION NOT SET!!!\n", __func__);
+}
+
+void plat_tz_usb_ns_master_set(uint32_t ns)
+{
+	/* This function should be implemented in the platform side. */
+	ERROR("%s: TZ CONFIGURATION NOT SET!!!\n", __func__);
+}
+
+void tz_master_default_cfg(void)
+{
+	plat_tz_master_default_cfg();
+}
+
+void tz_sdio_ns_master_set(uint32_t ns)
+{
+	plat_tz_sdio_ns_master_set(ns);
+}
+
+void tz_usb_ns_master_set(uint32_t ns)
+{
+	plat_tz_usb_ns_master_set(ns);
+}
diff --git a/plat/brcm/board/common/cmn_sec.h b/plat/brcm/board/common/cmn_sec.h
new file mode 100644
index 0000000..f74863d
--- /dev/null
+++ b/plat/brcm/board/common/cmn_sec.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CMN_SEC_H
+#define CMN_SEC_H
+
+#include <stdint.h>
+
+#define SECURE_MASTER 0
+#define NS_MASTER 1
+
+void tz_master_default_cfg(void);
+void tz_usb_ns_master_set(uint32_t ns);
+void tz_sdio_ns_master_set(uint32_t ns);
+
+#endif
diff --git a/plat/brcm/board/common/err.c b/plat/brcm/board/common/err.c
new file mode 100644
index 0000000..1fc73c4
--- /dev/null
+++ b/plat/brcm/board/common/err.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <lib/mmio.h>
+
+#include <platform_def.h>
+
+#define L0_RESET 0x2
+
+/*
+ * Brcm error handler
+ */
+void plat_error_handler(int err)
+{
+	INFO("L0 reset...\n");
+
+	/* Ensure the characters are flushed out */
+	console_flush();
+
+	mmio_write_32(CRMU_SOFT_RESET_CTRL, L0_RESET);
+
+	/*
+	 * In case we get here:
+	 * Loop until the watchdog resets the system
+	 */
+	while (1) {
+		wfi();
+	}
+}
diff --git a/plat/brcm/board/common/plat_setup.c b/plat/brcm/board/common/plat_setup.c
new file mode 100644
index 0000000..95e12ed
--- /dev/null
+++ b/plat/brcm/board/common/plat_setup.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+/*
+ * This function returns the fixed clock frequency at which private
+ * timers run. This value will be programmed into CNTFRQ_EL0.
+ */
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return SYSCNT_FREQ;
+}
+
+static const char * const plat_prefix_str[] = {
+	"E: ", "N: ", "W: ", "I: ", "V: "
+};
+
+const char *plat_log_get_prefix(unsigned int log_level)
+{
+	return plat_prefix_str[log_level - 1U];
+}
diff --git a/plat/brcm/board/common/platform_common.c b/plat/brcm/board/common/platform_common.c
new file mode 100644
index 0000000..9bae83a
--- /dev/null
+++ b/plat/brcm/board/common/platform_common.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+
+#include <cmn_plat_util.h>
+#include <platform_def.h>
+
+uint32_t boot_source_get(void)
+{
+	/* For now return BOOT_SOURCE_QSPI */
+	return BOOT_SOURCE_QSPI;
+}
+
+void __dead2 plat_soft_reset(uint32_t reset)
+{
+	if (reset == SOFT_RESET_L3) {
+		mmio_setbits_32(CRMU_IHOST_SW_PERSISTENT_REG1, reset);
+		mmio_write_32(CRMU_MAIL_BOX0, 0x0);
+		mmio_write_32(CRMU_MAIL_BOX1, 0xFFFFFFFF);
+	}
+
+	if (reset != SOFT_SYS_RESET_L1)
+		reset = SOFT_PWR_UP_RESET_L0;
+
+	if (reset == SOFT_PWR_UP_RESET_L0)
+		INFO("L0 RESET...\n");
+
+	if (reset == SOFT_SYS_RESET_L1)
+		INFO("L1 RESET...\n");
+
+	console_flush();
+
+	mmio_clrbits_32(CRMU_SOFT_RESET_CTRL, 1 << reset);
+
+	while (1) {
+		;
+	}
+}
diff --git a/plat/brcm/board/stingray/aarch64/plat_helpers.S b/plat/brcm/board/stingray/aarch64/plat_helpers.S
new file mode 100644
index 0000000..6095532
--- /dev/null
+++ b/plat/brcm/board/stingray/aarch64/plat_helpers.S
@@ -0,0 +1,263 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <assert_macros.S>
+#include <cpu_macros.S>
+#include <cortex_a72.h>
+#include <drivers/ti/uart/uart_16550.h>
+
+#include <platform_def.h>
+
+	.globl	plat_reset_handler
+	.globl	platform_get_entrypoint
+	.globl	plat_secondary_cold_boot_setup
+	.globl	platform_mem_init
+	.globl	platform_check_mpidr
+	.globl	plat_crash_console_init
+	.globl	plat_crash_console_putc
+	.globl	plat_crash_console_flush
+	.globl	plat_disable_acp
+	.globl	plat_is_my_cpu_primary
+	.globl	plat_my_core_pos
+	.globl	platform_is_primary_cpu
+	.globl	plat_brcm_calc_core_pos
+	.globl	plat_get_my_entrypoint
+
+
+	/* ------------------------------------------------------------
+	 * void plat_l2_init(void);
+	 *
+	 * BL1 and BL2 run with one core, one cluster
+	 * This is safe to disable cluster coherency
+	 * to make use of the data cache MMU WB attribute
+	 * for the SRAM.
+	 *
+	 * Set L2 Auxiliary Control Register
+	 * --------------------------------------------------------------------
+	 */
+func plat_l2_init
+	mrs x0, CORTEX_A72_L2ACTLR_EL1
+#if (IMAGE_BL1 || IMAGE_BL2) || defined(USE_SINGLE_CLUSTER)
+	orr x0, x0, #CORTEX_A72_L2ACTLR_DISABLE_ACE_SH_OR_CHI
+#else
+	bic x0, x0, #CORTEX_A72_L2ACTLR_DISABLE_ACE_SH_OR_CHI
+#endif
+	msr CORTEX_A72_L2ACTLR_EL1, x0
+
+	/* Set L2 Control Register */
+	mrs x0, CORTEX_A72_L2CTLR_EL1
+	mov x1, #((CORTEX_A72_L2_DATA_RAM_LATENCY_MASK << \
+			CORTEX_A72_L2CTLR_DATA_RAM_LATENCY_SHIFT) | \
+			(CORTEX_A72_L2_TAG_RAM_LATENCY_MASK << \
+			CORTEX_A72_L2CTLR_TAG_RAM_LATENCY_SHIFT) | \
+			(U(0x1) << CORTEX_A72_L2CTLR_TAG_RAM_SETUP_SHIFT) | \
+			(U(0x1) << CORTEX_A72_L2CTLR_DATA_RAM_SETUP_SHIFT))
+	bic x0, x0, x1
+	mov x1, #((CORTEX_A72_L2_DATA_RAM_LATENCY_3_CYCLES << \
+			CORTEX_A72_L2CTLR_DATA_RAM_LATENCY_SHIFT) | \
+			(U(0x1) << CORTEX_A72_L2CTLR_TAG_RAM_SETUP_SHIFT) | \
+			(U(0x1) << CORTEX_A72_L2CTLR_DATA_RAM_SETUP_SHIFT))
+	orr x0, x0, x1
+	msr CORTEX_A72_L2CTLR_EL1, x0
+
+	isb
+	ret
+endfunc plat_l2_init
+
+	/* --------------------------------------------------------------------
+	 * void plat_reset_handler(void);
+	 *
+	 * Before adding code in this function, refer to the guidelines in
+	 * docs/firmware-design.md.
+	 *
+	 * --------------------------------------------------------------------
+	 */
+func plat_reset_handler
+	mov	x9, x30
+	bl	plat_l2_init
+	mov	x30, x9
+	ret
+endfunc plat_reset_handler
+
+	/* -----------------------------------------------------
+	 * void platform_get_entrypoint (unsigned int mpid);
+	 *
+	 * Main job of this routine is to distinguish between
+	 * a cold and warm boot.
+	 * On a cold boot the secondaries first wait for the
+	 * platform to be initialized after which they are
+	 * hotplugged in. The primary proceeds to perform the
+	 * platform initialization.
+	 * -----------------------------------------------------
+	 */
+func platform_get_entrypoint
+	/*TBD-STINGRAY*/
+	mov x0, #0
+	ret
+endfunc platform_get_entrypoint
+
+	/* -----------------------------------------------------
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * This function performs any platform specific actions
+	 * needed for a secondary cpu after a cold reset e.g
+	 * mark the cpu's presence, mechanism to place it in a
+	 * holding pen etc.
+	 * -----------------------------------------------------
+	 */
+func plat_secondary_cold_boot_setup
+	bl	plat_my_core_pos
+	mov_imm	x1, SECONDARY_CPU_SPIN_BASE_ADDR
+	add	x0, x1, x0, LSL #3
+	mov	x1, #0
+	str	x1, [x0]
+
+	/* Wait until the entrypoint gets populated */
+poll_mailbox:
+	ldr	x1, [x0]
+	cbz	x1, 1f
+	br	x1
+1:
+	wfe
+	b	poll_mailbox
+endfunc plat_secondary_cold_boot_setup
+
+
+	/* -----------------------------------------------------
+	 * void platform_mem_init(void);
+	 *
+	 * We don't need to carry out any memory initialization
+	 * on CSS platforms. The Secure RAM is accessible straight away.
+	 * -----------------------------------------------------
+	 */
+func platform_mem_init
+	/*TBD-STINGRAY*/
+	ret
+endfunc platform_mem_init
+
+	/* -----------------------------------------------------
+	 * Placeholder function which should be redefined by
+	 * each platform.
+	 * -----------------------------------------------------
+	 */
+func platform_check_mpidr
+	/*TBD-STINGRAY*/
+	mov	x0, xzr
+	ret
+endfunc platform_check_mpidr
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_init(void)
+	 * Function to initialize the crash console
+	 * without a C Runtime to print crash report.
+	 * Clobber list : x0, x1, x2
+	 * ---------------------------------------------
+	 */
+
+func plat_crash_console_init
+	mov_imm	x0, BRCM_CRASH_CONSOLE_BASE
+	mov_imm	x1, BRCM_CRASH_CONSOLE_REFCLK
+	mov_imm	x2, BRCM_CRASH_CONSOLE_BAUDRATE
+	b	console_16550_core_init
+	ret
+endfunc plat_crash_console_init
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_putc(void)
+	 * Function to print a character on the crash
+	 * console without a C Runtime.
+	 * Clobber list : x1, x2, x3
+	 * ---------------------------------------------
+	 */
+
+func plat_crash_console_putc
+	mov_imm x1, BRCM_CRASH_CONSOLE_BASE
+	b	console_16550_core_putc
+	ret
+endfunc plat_crash_console_putc
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_flush(void)
+	 * Function to flush crash console
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func plat_crash_console_flush
+	mov_imm x0, BRCM_CRASH_CONSOLE_BASE
+	b	console_16550_core_flush
+	ret
+endfunc plat_crash_console_flush
+
+	/* -----------------------------------------------------
+	 * Placeholder function which should be redefined by
+	 * each platform. This function is allowed to use
+	 * registers x0 - x17.
+	 * -----------------------------------------------------
+	 */
+
+func plat_disable_acp
+	/*TBD-STINGRAY*/
+	ret
+endfunc plat_disable_acp
+
+	/* -----------------------------------------------------
+	 * unsigned int plat_is_my_cpu_primary (void);
+	 *
+	 * Find out whether the current cpu is the primary
+	 * cpu (applicable only after a cold boot)
+	 * -----------------------------------------------------
+	 */
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	b	platform_is_primary_cpu
+endfunc plat_is_my_cpu_primary
+
+	/* -----------------------------------------------------
+	 *  unsigned int plat_my_core_pos(void)
+	 *  This function uses the plat_brcm_calc_core_pos()
+	 *  definition to get the index of the calling CPU.
+	 * -----------------------------------------------------
+	 */
+func plat_my_core_pos
+	mrs	x0, mpidr_el1
+	b	plat_brcm_calc_core_pos
+endfunc plat_my_core_pos
+
+	/* -----------------------------------------------------
+	 * unsigned int platform_is_primary_cpu (void);
+	 *
+	 * Find out whether the current cpu is the primary
+	 * cpu (applicable only after a cold boot)
+	 * -----------------------------------------------------
+	 */
+func platform_is_primary_cpu
+	mov	x9, x30
+	bl	plat_my_core_pos
+	cmp	x0, #PRIMARY_CPU
+	cset	x0, eq
+	ret	x9
+endfunc platform_is_primary_cpu
+
+	/* -----------------------------------------------------
+	 *  unsigned int plat_brcm_calc_core_pos(uint64_t mpidr)
+	 *  Helper function to calculate the core position.
+	 *  With this function: CorePos = (ClusterId * 4) +
+	 *  				  CoreId
+	 * -----------------------------------------------------
+	 */
+func plat_brcm_calc_core_pos
+	and	x1, x0, #MPIDR_CPU_MASK
+	and	x0, x0, #MPIDR_CLUSTER_MASK
+	add	x0, x1, x0, LSR #7
+	ret
+endfunc plat_brcm_calc_core_pos
+
+func plat_get_my_entrypoint
+	mrs	x0, mpidr_el1
+	b	platform_get_entrypoint
+endfunc plat_get_my_entrypoint
diff --git a/plat/brcm/board/stingray/bcm958742t-ns3.mk b/plat/brcm/board/stingray/bcm958742t-ns3.mk
new file mode 100644
index 0000000..f6df3b7
--- /dev/null
+++ b/plat/brcm/board/stingray/bcm958742t-ns3.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (c) 2015 - 2020, Broadcom
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+#######################################################
+# Board config file for bcm958742t-ns3 Stingray SST100-NS3
+#######################################################
+
+include plat/brcm/board/stingray/bcm958742t.mk
+
+# Load BL33 at 0xFF00_0000 address
+ifneq (${BL33_OVERRIDE_LOAD_ADDR},)
+$(eval $(call add_define_val,BL33_OVERRIDE_LOAD_ADDR,0xFF000000))
+endif
diff --git a/plat/brcm/board/stingray/bcm958742t.mk b/plat/brcm/board/stingray/bcm958742t.mk
new file mode 100644
index 0000000..5e164b8
--- /dev/null
+++ b/plat/brcm/board/stingray/bcm958742t.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (c) 2015 - 2020, Broadcom
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+#######################################################
+# Board config file for bcm958742t Stingray SST100
+#######################################################
+BOARD_FAMILY := "<bcm958742t.h>"
+$(eval $(call add_define,BOARD_FAMILY))
+
+# Board has internal programmable regulator
+IHOST_REG_TYPE := IHOST_REG_INTEGRATED
+$(eval $(call add_define,IHOST_REG_TYPE))
+
+# Board has internal programmable regulator
+VDDC_REG_TYPE := VDDC_REG_INTEGRATED
+$(eval $(call add_define,VDDC_REG_TYPE))
diff --git a/plat/brcm/board/stingray/include/crmu_def.h b/plat/brcm/board/stingray/include/crmu_def.h
new file mode 100644
index 0000000..ebc2bb6
--- /dev/null
+++ b/plat/brcm/board/stingray/include/crmu_def.h
@@ -0,0 +1,227 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CRMU_DEF_H
+#define CRMU_DEF_H
+
+#define CRMU_REGS_BASE			0x66410000
+/* 32 kB IDRAM */
+#define CRMU_IDRAM_BASE_ADDR		CRMU_REGS_BASE
+#define CRMU_IDRAM_SIZE			0x8000
+/* 4 kB Scratch RAM */
+#define CRMU_SRAM_BASE			(CRMU_IDRAM_BASE_ADDR + CRMU_IDRAM_SIZE)
+#define CRMU_SRAM_SIZE			0x1000
+
+#define CRMU_RESERVED_SPACE		0x3000
+#define CRMU_CORE_BASE			(CRMU_SRAM_BASE + CRMU_SRAM_SIZE + \
+					 CRMU_RESERVED_SPACE)
+
+#define CRMU_SHARED_SRAM_BASE		CRMU_SRAM_BASE
+#define CRMU_SHARED_SRAM_SIZE		0x200
+#define CRMU_CFG_BASE			(CRMU_SHARED_SRAM_BASE + \
+					 CRMU_SHARED_SRAM_SIZE)
+
+#define CRMU_PWR_GOOD_STATUS		CRMU_CORE_BASE
+#define CRMU_PWR_GOOD_STATUS__BBL_POWER_GOOD 0
+#define CRMU_ISO_CELL_CONTROL		(CRMU_CORE_BASE + 0x4)
+#define CRMU_ISO_CELL_CONTROL__CRMU_ISO_PDBBL 16
+#define CRMU_ISO_CELL_CONTROL__CRMU_ISO_PDBBL_TAMPER 24
+#define CRMU_SPRU_SOURCE_SEL_STAT	(CRMU_CORE_BASE + 0xc)
+#define CRMU_SPRU_SOURCE_SEL_STAT__SPRU_SOURCE_SELECT 0
+#define BSTI_BASE			(CRMU_CORE_BASE + 0x28)
+#define BSTI_CONTROL_OFFSET		BSTI_BASE
+#define BSTI_COMMAND_OFFSET		(BSTI_BASE + 0x4)
+
+#define OCOTP_REGS_BASE			(CRMU_CORE_BASE + 0x400)
+
+#define CRMU_TCI_BASE			(CRMU_CORE_BASE + 0x800)
+#define CRMU_SWREG_STATUS_ADDR		(CRMU_TCI_BASE + 0x0c)
+#define CRMU_CHIP_OTPC_STATUS		(CRMU_TCI_BASE + 0x10)
+#define CRMU_CHIP_OTPC_STATUS__OTP_BISR_LOAD_DONE 19
+#define CRMU_BISR_PDG_MASK		(CRMU_TCI_BASE + 0x4c)
+#define CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST0 2
+#define CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST1 3
+#define CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST2 4
+#define CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST3 0
+#define CRMU_POWER_POLL			(CRMU_TCI_BASE + 0x60)
+#define CRMU_OTP_STATUS			CRMU_POWER_POLL
+#define CRMU_OTP_STATUS_BIT		1
+#define CRMU_DDR_PHY_AON_CTRL		(CRMU_TCI_BASE + 0x64)
+#define CRMU_DDRPHY2_HW_RESETN_R	BIT(21)
+#define CRMU_DDRPHY2_PWROKIN_PHY_R	BIT(20)
+#define CRMU_DDRPHY2_PWRONIN_PHY_R	BIT(19)
+#define CRMU_DDRPHY2_ISO_PHY_DFI_R	BIT(18)
+#define CRMU_DDRPHY2_ISO_PHY_REGS_R	BIT(17)
+#define CRMU_DDRPHY2_ISO_PHY_PLL_R	BIT(16)
+#define CRMU_DDRPHY1_HW_RESETN_R	BIT(13)
+#define CRMU_DDRPHY1_PWROKIN_PHY_R	BIT(12)
+#define CRMU_DDRPHY1_PWRONIN_PHY_R	BIT(11)
+#define CRMU_DDRPHY1_ISO_PHY_DFI_R	BIT(10)
+#define CRMU_DDRPHY1_ISO_PHY_REGS_R	BIT(9)
+#define CRMU_DDRPHY1_ISO_PHY_PLL_R	BIT(8)
+#define CRMU_DDRPHY0_HW_RESETN_R	BIT(5)
+#define CRMU_DDRPHY0_PWROKIN_PHY_R	BIT(4)
+#define CRMU_DDRPHY0_PWRONIN_PHY_R	BIT(3)
+#define CRMU_DDRPHY0_ISO_PHY_DFI_R	BIT(2)
+#define CRMU_DDRPHY0_ISO_PHY_REGS_R	BIT(1)
+#define CRMU_DDRPHY0_ISO_PHY_PLL_R	BIT(0)
+#define CRMU_EMEM_RESET_N_R		BIT(16)
+#define CRMU_EMEM_PRESET_N_R		BIT(0)
+#define CRMU_SWREG_CTRL_ADDR		(CRMU_TCI_BASE + 0x6c)
+#define CRMU_AON_CTRL1			(CRMU_TCI_BASE + 0x70)
+#define CRMU_AON_CTRL1__LCPLL1_ISO_IN    18
+#define CRMU_AON_CTRL1__LCPLL1_PWRON_LDO 19
+#define CRMU_AON_CTRL1__LCPLL1_PWR_ON    20
+#define CRMU_AON_CTRL1__LCPLL0_ISO_IN    21
+#define CRMU_AON_CTRL1__LCPLL0_PWRON_LDO 22
+#define CRMU_AON_CTRL1__LCPLL0_PWR_ON    23
+#define CRMU_PCIE_LCPLL_PWR_ON_SHIFT     29
+#define CRMU_PCIE_LCPLL_PWR_ON_MASK      BIT(CRMU_PCIE_LCPLL_PWR_ON_SHIFT)
+#define CRMU_PCIE_LCPLL_PWRON_LDO_SHIFT  28
+#define CRMU_PCIE_LCPLL_PWRON_LDO_MASK   BIT(CRMU_PCIE_LCPLL_PWRON_LDO_SHIFT)
+#define CRMU_PCIE_LCPLL_ISO_IN_SHIFT     27
+#define CRMU_PCIE_LCPLL_ISO_IN_MASK      BIT(CRMU_PCIE_LCPLL_ISO_IN_SHIFT)
+#define CRMU_MASTER_AXI_ARUSER_CONFIG	(CRMU_TCI_BASE + 0x74)
+#define CRMU_MASTER_AXI_AWUSER_CONFIG	(CRMU_TCI_BASE + 0x78)
+#define CRMU_DDR_PHY_AON_CTRL_1		(CRMU_TCI_BASE + 0x8c)
+
+#define CDRU_BASE_ADDR			(CRMU_CORE_BASE + 0x1000)
+#define CDRU_MISC_RESET_CONTROL		CDRU_BASE_ADDR
+#define CDRU_MISC_RESET_CONTROL_TS_RESET_N		16
+#define CDRU_MISC_RESET_CONTROL__CDRU_USBSS_RESET_N	14
+#define CDRU_MISC_RESET_CONTROL__CDRU_SATA_RESET_N_R	15
+#define CDRU_MISC_RESET_CONTROL__CDRU_MHB_RESET_N_R	13
+#define CDRU_MISC_RESET_CONTROL__CDRU_PCIE_RESET_N_R	3
+#define CDRU_MISC_RESET_CONTROL__CDRU_PM_RESET_N_R	2
+#define CDRU_MISC_RESET_CONTROL__CDRU_NITRO_RESET_N_R	1
+
+#define CDRU_PROC_EVENT_CLEAR		(CDRU_BASE_ADDR + 0x48)
+#define CDRU_PROC_EVENT_CLEAR__IH0_CDRU_STANDBYWFIL2		0
+#define CDRU_PROC_EVENT_CLEAR__IH0_CDRU_STANDBYWFI		3
+#define CDRU_PROC_EVENT_CLEAR__IH1_CDRU_STANDBYWFIL2		5
+#define CDRU_PROC_EVENT_CLEAR__IH1_CDRU_STANDBYWFI		8
+#define CDRU_PROC_EVENT_CLEAR__IH2_CDRU_STANDBYWFIL2		10
+#define CDRU_PROC_EVENT_CLEAR__IH2_CDRU_STANDBYWFI		13
+#define CDRU_PROC_EVENT_CLEAR__IH3_CDRU_STANDBYWFIL2		15
+#define CDRU_PROC_EVENT_CLEAR__IH3_CDRU_STANDBYWFI		18
+
+#define CDRU_CHIP_STRAP_CTRL		(CDRU_BASE_ADDR + 0x50)
+#define CDRU_CHIP_STRAP_CTRL__SOFTWARE_OVERRIDE 31
+
+#define CDRU_CHIP_IO_PAD_CONTROL	(CDRU_BASE_ADDR + 0x58)
+#define CDRU_CHIP_IO_PAD_CONTROL__CDRU_IOMUX_FORCE_PDN_R	8
+#define CDRU_CHIP_IO_PAD_CONTROL__CDRU_IOMUX_FORCE_PAD_IN_R	0
+
+#define CDRU_CHIP_STRAP_DATA_LSW	(CDRU_BASE_ADDR + 0x5c)
+#define CDRU_CHIP_STRAP_DATA_LSW__BISR_BYPASS_MODE		18
+#define CDRU_CHIP_STRAP_DATA_LSW__NIC_MODE_MASK		BIT(8)
+#define CDRU_CHIP_STRAP_DATA_LSW_PAD_USB_MODE		BIT(26)
+
+#define CDRU_CHIP_STRAP_DATA		(CDRU_BASE_ADDR + 0x5c)
+#define CDRU_DDR0_CONTROL_OFFSET	(CDRU_BASE_ADDR + 0xb8)
+#define CDRU_DDR1_CONTROL_OFFSET	(CDRU_BASE_ADDR + 0xbc)
+#define CDRU_DDR2_CONTROL_OFFSET	(CDRU_BASE_ADDR + 0xc0)
+#define CRMU_SW_POR_RESET_CTRL		(CDRU_BASE_ADDR + 0x100)
+
+#define CDRU_GENPLL2_CONTROL1		(CDRU_BASE_ADDR + 0x1b0)
+#define CDRU_GENPLL2_CONTROL1__CHNL6_FS4_CLK		BIT(11)
+#define CDRU_GENPLL5_CONTROL1		(CDRU_BASE_ADDR + 0x24c)
+#define CDRU_GENPLL5_CONTROL1__CHNL0_DME_CLK		BIT(6)
+#define CDRU_GENPLL5_CONTROL1__CHNL1_CRYPTO_AE_CLK	BIT(7)
+#define CDRU_GENPLL5_CONTROL1__CHNL2_RAID_AE_CLK	BIT(8)
+
+#define CDRU_NITRO_CONTROL		(CDRU_BASE_ADDR + 0x2c4)
+#define CDRU_NITRO_CONTROL__CDRU_NITRO_SEC_MODE_R		20
+#define CDRU_NITRO_CONTROL__CDRU_NITRO_SEC_OVERRIDE_R		16
+
+#define CDRU_MISC_CLK_ENABLE_CONTROL	(CDRU_BASE_ADDR + 0x2c8)
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_EMEM2_CLK_EN_R	11
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_EMEM1_CLK_EN_R	10
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_EMEM0_CLK_EN_R	9
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_SATA_CLK_EN_R	8
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_USBSS_CLK_EN_R	7
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_MHB_CLK_EN_R		6
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_HSLS_CLK_EN_R	5
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_SCR_CLK_EN_R		4
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_FS4_CLK_EN_R		3
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_PCIE_CLK_EN_R	2
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_PM_CLK_EN_R		1
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_NITRO_CLK_EN_R	0
+
+#define CDRU_CCN_REGISTER_CONTROL_1	(CDRU_BASE_ADDR + 0x324)
+#define CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_EMEM0_BIT 6
+#define CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_EMEM1_BIT 5
+#define CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_EMEM2_BIT 4
+
+#define CDRU_CHIP_TOP_SPARE_REG0	(CDRU_BASE_ADDR + 0x378)
+#define CDRU_CHIP_TOP_SPARE_REG1	(CDRU_BASE_ADDR + 0x37c)
+
+#define CENTRAL_TIMER_BASE		(CRMU_CORE_BASE + 0x5000)
+#define CENTRAL_TIMER_CTRL		(CENTRAL_TIMER_BASE + 0x0)
+#define CENTRAL_TIMER_GET_L		(CENTRAL_TIMER_BASE + 0x4)
+#define CENTRAL_TIMER_GET_L0		(CENTRAL_TIMER_BASE + 0x8) /* SCR STM */
+#define CENTRAL_TIMER_GET_L1		(CENTRAL_TIMER_BASE + 0xC) /* FS STM */
+#define CENTRAL_TIMER_GET_L2		(CENTRAL_TIMER_BASE + 0x10) /* iHost0 */
+#define CENTRAL_TIMER_GET_L3		(CENTRAL_TIMER_BASE + 0x14) /* iHost1 */
+#define CENTRAL_TIMER_GET_L4		(CENTRAL_TIMER_BASE + 0x18) /* iHost2 */
+#define CENTRAL_TIMER_GET_L5		(CENTRAL_TIMER_BASE + 0x1C) /* iHost3 */
+#define CENTRAL_TIMER_GET_H		(CENTRAL_TIMER_BASE + 0x28)
+#define CENTRAL_TIMER_SAT_TMR_ENA	(CENTRAL_TIMER_BASE + 0x34)
+#define CENTRAL_TIMER_GET_IHOST_ENA_BASE	(CENTRAL_TIMER_GET_L2)
+
+#define CRMU_WDT_REGS_BASE		(CRMU_CORE_BASE + 0x6000)
+
+#define CRMU_MAIL_BOX0			(CRMU_CORE_BASE + 0x8024)
+#define CRMU_MAIL_BOX1			(CRMU_CORE_BASE + 0x8028)
+#define CRMU_READ_MAIL_BOX0		(CRMU_CORE_BASE + 0x802c)
+#define CRMU_READ_MAIL_BOX1		(CRMU_CORE_BASE + 0x8030)
+#define AP_TO_SCP_MAILBOX1		CRMU_MAIL_BOX1
+#define SCP_TO_AP_MAILBOX1		CRMU_READ_MAIL_BOX1
+#define CRMU_IHOST_POWER_CONFIG		(CRMU_CORE_BASE + 0x8038)
+#define CRMU_RESET_EVENT_LOG		(CRMU_CORE_BASE + 0x8064)
+#define CRMU_SOFT_RESET_CTRL		(CRMU_CORE_BASE + 0x8090)
+#define CRMU_SOFT_RESET_CTRL__SOFT_PWR_UP_RST 0
+#define CRMU_SOFT_RESET_CTRL__SOFT_SYS_RST 1
+#define CRMU_SPARE_REG_0		(CRMU_CORE_BASE + 0x80b8)
+#define CRMU_SPARE_REG_1		(CRMU_CORE_BASE + 0x80bc)
+#define CRMU_SPARE_REG_2		(CRMU_CORE_BASE + 0x80c0)
+#define CRMU_SPARE_REG_3		(CRMU_CORE_BASE + 0x80c4)
+#define CRMU_SPARE_REG_4		(CRMU_CORE_BASE + 0x80c8)
+#define CRMU_SPARE_REG_5		(CRMU_CORE_BASE + 0x80cc)
+#define CRMU_CORE_ADDR_RANGE0_LOW	(CRMU_CORE_BASE + 0x8c30)
+#define CRMU_CORE_ADDR_RANGE1_LOW	(CRMU_CORE_BASE + 0x8c38)
+#define CRMU_CORE_ADDR_RANGE2_LOW	(CRMU_CORE_BASE + 0x8c40)
+#define CRMU_IHOST_SW_PERSISTENT_REG0	(CRMU_CORE_BASE + 0x8c54)
+#define CRMU_IHOST_SW_PERSISTENT_REG1	(CRMU_CORE_BASE + 0x8c58)
+#define CRMU_IHOST_SW_PERSISTENT_REG2	(CRMU_CORE_BASE + 0x8c5c)
+#define CRMU_IHOST_SW_PERSISTENT_REG3	(CRMU_CORE_BASE + 0x8c60)
+#define CRMU_IHOST_SW_PERSISTENT_REG4	(CRMU_CORE_BASE + 0x8c64)
+#define CRMU_IHOST_SW_PERSISTENT_REG5	(CRMU_CORE_BASE + 0x8c68)
+#define CRMU_IHOST_SW_PERSISTENT_REG6	(CRMU_CORE_BASE + 0x8c6c)
+#define CRMU_IHOST_SW_PERSISTENT_REG7	(CRMU_CORE_BASE + 0x8c70)
+#define CRMU_BBL_AUTH_CHECK		(CRMU_CORE_BASE + 0x8c78)
+#define CRMU_SOTP_NEUTRALIZE_ENABLE	(CRMU_CORE_BASE + 0x8c84)
+#define CRMU_IHOST_SW_PERSISTENT_REG8	(CRMU_CORE_BASE + 0x8c88)
+#define CRMU_IHOST_SW_PERSISTENT_REG9	(CRMU_CORE_BASE + 0x8c8c)
+#define CRMU_IHOST_SW_PERSISTENT_REG10	(CRMU_CORE_BASE + 0x8c90)
+#define CRMU_IHOST_SW_PERSISTENT_REG11	(CRMU_CORE_BASE + 0x8c94)
+
+#define CNT_CONTROL_BASE		(CRMU_CORE_BASE + 0x9000)
+#define CNTCR				(CNT_CONTROL_BASE)
+#define CNTCR__EN			BIT(0)
+
+#define SPRU_BBL_WDATA			(CRMU_CORE_BASE + 0xa000)
+#define SPRU_BBL_CMD			(CRMU_CORE_BASE + 0xa004)
+#define SPRU_BBL_CMD__IND_SOFT_RST_N	10
+#define SPRU_BBL_CMD__IND_WR		11
+#define SPRU_BBL_CMD__BBL_ADDR_R	0
+#define SPRU_BBL_CMD__IND_RD		12
+#define SPRU_BBL_CMD__BBL_ADDR_R	0
+#define SPRU_BBL_STATUS			(CRMU_CORE_BASE + 0xa008)
+#define SPRU_BBL_STATUS__ACC_DONE	0
+#define SPRU_BBL_RDATA			(CRMU_CORE_BASE + 0xa00c)
+
+#endif /* CRMU_DEF_H */
diff --git a/plat/brcm/board/stingray/include/plat_macros.S b/plat/brcm/board/stingray/include/plat_macros.S
new file mode 100644
index 0000000..dccd54a
--- /dev/null
+++ b/plat/brcm/board/stingray/include/plat_macros.S
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_MACROS_S
+#define PLAT_MACROS_S
+
+.section .rodata.gic_reg_name, "aS"
+gicc_regs:
+	.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
+gicd_pend_reg:
+	.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n Offset:\t\t\tvalue\n"
+newline:
+	.asciz "\n"
+spacer:
+	.asciz ":\t\t0x"
+
+/* ---------------------------------------------
+ * The below required platform porting macro
+ * prints out relevant registers whenever an
+ * unhandled exception is taken in BL31.
+ * ---------------------------------------------
+ */
+.macro plat_crash_print_regs
+	nop
+.endm
+
+/* ---------------------------------------------
+ * The below macro prints out relevant GIC
+ * registers whenever an unhandled exception is
+ * taken in BL31.
+ * ---------------------------------------------
+ */
+.macro plat_print_gic_regs
+	nop
+	/*TBD-STINGRAY*/
+.endm
+
+/* ------------------------------------------------
+ * The below required platform porting macro prints
+ * out relevant interconnect registers whenever an
+ * unhandled exception is taken in BL3-1.
+  * ------------------------------------------------
+ */
+.macro plat_print_interconnect_regs
+	nop
+	/*TBD-STINGRAY*/
+.endm
+
+#endif /* PLAT_MACROS_S */
diff --git a/plat/brcm/board/stingray/include/platform_def.h b/plat/brcm/board/stingray/include/platform_def.h
new file mode 100644
index 0000000..950c66b
--- /dev/null
+++ b/plat/brcm/board/stingray/include/platform_def.h
@@ -0,0 +1,272 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <arch.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <plat/common/common_def.h>
+
+#include <brcm_def.h>
+
+#include <cmn_plat_def.h>
+
+#include "sr_def.h"
+
+/*
+ * Most platform porting definitions provided by included headers
+ */
+#define PLAT_BRCM_SCP_TZC_DRAM1_SIZE	ULL(0x0)
+
+/*
+ * Required by standard platform porting definitions
+ */
+#define PLATFORM_CLUSTER0_CORE_COUNT	2
+#define PLATFORM_CLUSTER1_CORE_COUNT	2
+#define PLATFORM_CLUSTER2_CORE_COUNT	2
+#define PLATFORM_CLUSTER3_CORE_COUNT	2
+#define PLATFORM_CLUSTER4_CORE_COUNT	2
+
+#define BRCM_SYSTEM_COUNT 1
+#define BRCM_CLUSTER_COUNT 5
+
+#define PLATFORM_CORE_COUNT	(PLATFORM_CLUSTER0_CORE_COUNT + \
+					PLATFORM_CLUSTER1_CORE_COUNT+ \
+					PLATFORM_CLUSTER2_CORE_COUNT+ \
+					PLATFORM_CLUSTER3_CORE_COUNT+ \
+					PLATFORM_CLUSTER4_CORE_COUNT)
+
+#define PLAT_NUM_PWR_DOMAINS	(BRCM_SYSTEM_COUNT + \
+				 BRCM_CLUSTER_COUNT + \
+				 PLATFORM_CORE_COUNT)
+
+#define PLAT_MAX_PWR_LVL	MPIDR_AFFLVL2
+
+/* TBD-STINGRAY */
+#define CACHE_WRITEBACK_SHIFT       6
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE         (1 << CACHE_WRITEBACK_SHIFT)
+
+/* TBD-STINGRAY */
+#define PLATFORM_MAX_AFFLVL             MPIDR_AFFLVL1
+
+#define BL1_PLATFORM_STACK_SIZE 0x3300
+#define BL2_PLATFORM_STACK_SIZE 0xc000
+#define BL11_PLATFORM_STACK_SIZE 0x2b00
+#define DEFAULT_PLATFORM_STACK_SIZE 0x400
+#if IMAGE_BL1
+# define PLATFORM_STACK_SIZE BL1_PLATFORM_STACK_SIZE
+#else
+#if IMAGE_BL2
+#ifdef USE_BL1_RW
+# define PLATFORM_STACK_SIZE BL2_PLATFORM_STACK_SIZE
+#else
+# define PLATFORM_STACK_SIZE BL1_PLATFORM_STACK_SIZE
+#endif
+#else
+#if IMAGE_BL11
+# define PLATFORM_STACK_SIZE BL11_PLATFORM_STACK_SIZE
+#else
+# define PLATFORM_STACK_SIZE DEFAULT_PLATFORM_STACK_SIZE
+#endif
+#endif
+#endif
+
+#define PLAT_BRCM_TRUSTED_SRAM_BASE	0x66D00000
+#define PLAT_BRCM_TRUSTED_SRAM_SIZE	0x00040000
+
+#ifdef RUN_BL1_FROM_QSPI /* BL1 XIP from QSPI */
+# define PLAT_BRCM_TRUSTED_ROM_BASE	QSPI_BASE_ADDR
+#elif RUN_BL1_FROM_NAND /* BL1 XIP from NAND */
+# define PLAT_BRCM_TRUSTED_ROM_BASE	NAND_BASE_ADDR
+#else /* BL1 executed in ROM */
+# define PLAT_BRCM_TRUSTED_ROM_BASE	ROM_BASE_ADDR
+#endif
+#define PLAT_BRCM_TRUSTED_ROM_SIZE	0x00040000
+
+/*******************************************************************************
+ * BL1 specific defines.
+ ******************************************************************************/
+#define BL1_RO_BASE		        PLAT_BRCM_TRUSTED_ROM_BASE
+#define BL1_RO_LIMIT			(PLAT_BRCM_TRUSTED_ROM_BASE \
+					+ PLAT_BRCM_TRUSTED_ROM_SIZE)
+
+/*
+ * Put BL1 RW at the beginning of the Trusted SRAM.
+ */
+#define BL1_RW_BASE			(BRCM_BL_RAM_BASE)
+#define BL1_RW_LIMIT			(BL1_RW_BASE + 0x12000)
+
+#define BL11_RW_BASE		BL1_RW_LIMIT
+#define BL11_RW_LIMIT		(PLAT_BRCM_TRUSTED_SRAM_BASE + \
+				PLAT_BRCM_TRUSTED_SRAM_SIZE)
+
+/*******************************************************************************
+ * BL2 specific defines.
+ ******************************************************************************/
+#if RUN_BL2_FROM_QSPI /* BL2 XIP from QSPI */
+#define BL2_BASE			QSPI_BASE_ADDR
+#define BL2_LIMIT			(BL2_BASE + 0x40000)
+#define BL2_RW_BASE		BL1_RW_LIMIT
+#define BL2_RW_LIMIT		(PLAT_BRCM_TRUSTED_SRAM_BASE + \
+				PLAT_BRCM_TRUSTED_SRAM_SIZE)
+#elif RUN_BL2_FROM_NAND /* BL2 XIP from NAND */
+#define BL2_BASE			NAND_BASE_ADDR
+#define BL2_LIMIT			(BL2_BASE + 0x40000)
+#define BL2_RW_BASE		BL1_RW_LIMIT
+#define BL2_RW_LIMIT		(PLAT_BRCM_TRUSTED_SRAM_BASE + \
+				PLAT_BRCM_TRUSTED_SRAM_SIZE)
+#else
+#define BL2_BASE			(BL1_RW_LIMIT + PAGE_SIZE)
+#define BL2_LIMIT			(BRCM_BL_RAM_BASE + BRCM_BL_RAM_SIZE)
+#endif
+
+/*
+ * BL1 persistent area in internal SRAM
+ * This area will increase as more features gets into BL1
+ */
+#define BL1_PERSISTENT_DATA_SIZE 0x2000
+
+/* To reduce BL2 runtime footprint, we can re-use some BL1_RW area */
+#define BL1_RW_RECLAIM_BASE (PLAT_BRCM_TRUSTED_SRAM_BASE + \
+			     BL1_PERSISTENT_DATA_SIZE)
+
+/*******************************************************************************
+ * BL3-1 specific defines.
+ ******************************************************************************/
+/* Max Size of BL31 (in DRAM) */
+#define PLAT_BRCM_MAX_BL31_SIZE		0x30000
+
+#ifdef USE_DDR
+#define BL31_BASE			BRCM_AP_TZC_DRAM1_BASE
+
+#define BL31_LIMIT			(BRCM_AP_TZC_DRAM1_BASE + \
+					PLAT_BRCM_MAX_BL31_SIZE)
+#else
+/* Put BL3-1 at the end of external on-board SRAM connected as NOR flash */
+#define BL31_BASE			(NOR_BASE_ADDR + NOR_SIZE - \
+					PLAT_BRCM_MAX_BL31_SIZE)
+
+#define BL31_LIMIT			(NOR_BASE_ADDR + NOR_SIZE)
+#endif
+
+#define SECURE_DDR_END_ADDRESS		BL31_LIMIT
+
+#ifdef NEED_SCP_BL2
+#define SCP_BL2_BASE			BL31_BASE
+#define PLAT_MAX_SCP_BL2_SIZE	0x9000
+#define PLAT_SCP_COM_SHARED_MEM_BASE (CRMU_SHARED_SRAM_BASE)
+/* dummy defined */
+#define PLAT_BRCM_MHU_BASE		0x0
+#endif
+
+#define SECONDARY_CPU_SPIN_BASE_ADDR	BRCM_SHARED_RAM_BASE
+
+/* Generic system timer counter frequency */
+#ifndef SYSCNT_FREQ
+#define SYSCNT_FREQ			(125 * 1000 * 1000)
+#endif
+
+/*
+ * Enable the BL32 definitions, only when optee os is selected as secure
+ * payload (BL32).
+ */
+#ifdef SPD_opteed
+/*
+ * Reserved Memory Map : SHMEM & TZDRAM.
+ *
+ * +--------+----------+ 0x8D000000
+ * | SHMEM (NS)         | 16MB
+ * +-------------------+ 0x8E000000
+ * |        | TEE_RAM(S)| 4MB
+ * + TZDRAM +----------+ 0x8E400000
+ * |        | TA_RAM(S) | 12MB
+ * +-------------------+ 0x8F000000
+ * | BL31 Binary (S)    | 192KB
+ * +-------------------+ 0x8F030000
+ */
+
+#define BL32_VA_SIZE		(4 * 1024 * 1024)
+#define BL32_BASE		(0x8E000000)
+#define BL32_LIMIT		(BL32_BASE + BL32_VA_SIZE)
+#define TSP_SEC_MEM_BASE	BL32_BASE
+#define TSP_SEC_MEM_SIZE	BL32_VA_SIZE
+#endif
+
+#ifdef SPD_opteed
+	#define SECURE_DDR_BASE_ADDRESS BL32_BASE
+#else
+	#define SECURE_DDR_BASE_ADDRESS BL31_BASE
+#endif
+/*******************************************************************************
+ * Platform specific page table and MMU setup constants
+ ******************************************************************************/
+
+#define MAX_XLAT_TABLES		7
+
+#define PLAT_BRCM_MMAP_ENTRIES	10
+
+#define MAX_MMAP_REGIONS		(PLAT_BRCM_MMAP_ENTRIES +	\
+					 BRCM_BL_REGIONS)
+
+#ifdef USE_DDR
+#ifdef BL33_OVERRIDE_LOAD_ADDR
+#define PLAT_BRCM_NS_IMAGE_OFFSET	BL33_OVERRIDE_LOAD_ADDR
+#else
+/*
+ * BL3-3 image starting offset.
+ * Putting start of DRAM as of now.
+ */
+#define PLAT_BRCM_NS_IMAGE_OFFSET	0x80000000
+#endif /* BL33_OVERRIDE_LOAD_ADDR */
+#else
+/*
+ * BL3-3 image starting offset.
+ * Putting start of external on-board SRAM as of now.
+ */
+#define PLAT_BRCM_NS_IMAGE_OFFSET	NOR_BASE_ADDR
+#endif /* USE_DDR */
+/******************************************************************************
+ * Required platform porting definitions common to all BRCM platforms
+ *****************************************************************************/
+
+#define MAX_IO_DEVICES			5
+#define MAX_IO_HANDLES			6
+
+#define PRIMARY_CPU		0
+
+/* GIC Parameter */
+#define PLAT_BRCM_GICD_BASE	GIC500_BASE
+#define PLAT_BRCM_GICR_BASE	(GIC500_BASE + 0x200000)
+
+/* Define secure interrupt as per Group here */
+#define PLAT_BRCM_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(BRCM_IRQ_SEC_SPI_0, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_EDGE)
+
+#define PLAT_BRCM_G0_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_0, PLAT_SDEI_NORMAL_PRI, (grp), \
+			GIC_INTR_CFG_EDGE), \
+
+/*
+ *CCN 502 related constants.
+ */
+#define PLAT_BRCM_CLUSTER_COUNT 4  /* Number of RN-F Masters */
+#define PLAT_BRCM_CLUSTER_TO_CCN_ID_MAP	CLUSTER0_NODE_ID, CLUSTER1_NODE_ID, CLUSTER2_NODE_ID, CLUSTER3_NODE_ID
+#define CCN_SIZE		0x1000000
+#define CLUSTER0_NODE_ID	1
+#define CLUSTER1_NODE_ID	7
+#define CLUSTER2_NODE_ID	9
+#define CLUSTER3_NODE_ID	15
+
+#endif
diff --git a/plat/brcm/board/stingray/include/sr_def.h b/plat/brcm/board/stingray/include/sr_def.h
new file mode 100644
index 0000000..ac3ee78
--- /dev/null
+++ b/plat/brcm/board/stingray/include/sr_def.h
@@ -0,0 +1,614 @@
+/*
+ * Copyright (c) 2016-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SR_DEF_H
+#define SR_DEF_H
+
+#ifndef __ASSEMBLER__
+#include <lib/mmio.h>
+#endif
+
+#include <common/interrupt_props.h>
+#include <drivers/arm/gic_common.h>
+
+#include <crmu_def.h>
+
+/* Special value used to verify platform parameters from BL2 to BL3-1 */
+#define BRCM_BL31_PLAT_PARAM_VAL	ULL(0x0f1e2d3c4b5a6978)
+
+#define MHB_BASE_ADDR		0x60000000
+#define PLAT_BRCM_CCN_BASE	0x61000000
+#define CORESIGHT_BASE_ADDR	0x62000000
+#define SMMU_BASE		0x64000000
+
+/* memory map entries*/
+/* Grouping block device for bigger MMU region */
+/* covers MHB, CNN, coresight, GIC, MMU, APB, CRMU */
+#define PERIPH0_BASE	MHB_BASE_ADDR
+#define PERIPH0_SIZE	0x06d00000
+
+#define PERIPH1_BASE	0x66d80000
+#define PERIPH1_SIZE	0x00f80000
+
+#define HSLS_BASE_ADDR	0x68900000
+#define HSLS_SIZE	0x04500000
+
+#define GIC500_BASE	0x63c00000
+#define GIC500_SIZE	0x400000
+
+/*******************************************************************************
+ * CCN related constants
+ ******************************************************************************/
+#define OLY_MN_REGISTERS_NODE0_SECURE_ACCESS	(PLAT_BRCM_CCN_BASE + 0x0)
+
+#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL	(PLAT_BRCM_CCN_BASE + 0x880500)
+
+/* Used for acceleration of coherent ordered writes */
+#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WUO  BIT(4)
+/* Wait for completion of requests at RN-I */
+#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WFC  BIT(3)
+
+/*
+ * Forces all reads from the RN-I to be sent with the request order bit set
+ * and this ensures ordered allocation of read data buffers in the RN-I
+ */
+#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_RQO  BIT(5)
+
+#define OLY_RNI3PDVM_REGISTERS_NODE14_AUX_CTL	(PLAT_BRCM_CCN_BASE + 0x8e0500)
+
+/* Wait for completion of requests at RN-I */
+#define OLY_RNI3PDVM_REGISTERS_NODE14_AUX_CTL_WFC BIT(3)
+
+#define OLY_HNI_REGISTERS_NODE0_POS_CONTROL	  (PLAT_BRCM_CCN_BASE + 0x80000)
+#define POS_CONTROL_HNI_POS_EN			  BIT(0)
+
+#define OLY_HNI_REGISTERS_NODE0_PCIERC_RNI_NODEID_LIST \
+						  (PLAT_BRCM_CCN_BASE + 0x80008)
+/* PAXB and PAXC connected to 8th Node */
+#define SR_RNI_PCIE_CONNECTED			  BIT(8)
+/* PAXB connected to 6th Node */
+#define SRP_RNI_PCIE_CONNECTED			  BIT(6)
+
+#define OLY_HNI_REGISTERS_NODE0_SA_AUX_CTL	  (PLAT_BRCM_CCN_BASE + 0x80500)
+#define SA_AUX_CTL_POS_EARLY_WR_COMP_EN		  BIT(5)
+#define SA_AUX_CTL_SER_DEVNE_WR			  BIT(9)
+
+/*******************************************************************************
+ * Coresight related constants
+ ******************************************************************************/
+#define CORESIGHT_BASE_ADDR	0x62000000
+
+#define IHOST0_BASE			0x66000000
+#define IHOST_ADDR_SPACE		0x2000
+
+/*******************************************************************************
+ * SCR related constants
+ ******************************************************************************/
+#define SCR_BASE			0x6600a000
+#define SCR_ARCACHE_OFFSET		4
+#define SCR_ARCACHE_MASK		(0x3 << SCR_ARCACHE_OFFSET)
+#define SCR_AWCACHE_OFFSET		6
+#define SCR_AWCACHE_MASK		(0x3 << SCR_AWCACHE_OFFSET)
+#define SCR_AXCACHE_CONFIG_MASK		(SCR_ARCACHE_MASK | SCR_AWCACHE_MASK)
+#define SCR_TBUX_AXCACHE_CONFIG		((0x1 << SCR_AWCACHE_OFFSET) | \
+					 (0x1 << SCR_ARCACHE_OFFSET))
+
+#define SCR_REGS_SCR_SOFT_RESET		(SCR_BASE + 0x1c)
+#define SCR_REGS_GIC_SOFT_RESET		BIT(0)
+
+#define SCR_GPV_BASE			0x66100000
+#define SCR_NOC_SECURITY0		(SCR_GPV_BASE + 0x08)
+#define SCR_NOC_DDR_REGISTER_ACCESS	(SCR_GPV_BASE + 0x30)
+
+/*******************************************************************************
+ * MEMC and DDR related constants
+ ******************************************************************************/
+#define DDR0_CONTROL_ROOT	0x66200000
+#define EMEM_SS_CFG_0_ROOT	0x66202000
+#define EMEM_SYS_IF_0_ROOT	0x66204000
+#define DDR_PHY0_ROOT		0x66240000
+
+#define DDR1_CONTROL_ROOT	0x66280000
+#define EMEM_SS_CFG_1_ROOT	0x66282000
+#define EMEM_SYS_IF_1_ROOT	0x66284000
+#define DDR_PHY1_ROOT		0x662c0000
+
+#define DDR2_CONTROL_ROOT	0x66300000
+#define EMEM_SS_CFG_2_ROOT	0x66302000
+#define EMEM_SYS_IF_2_ROOT	0x66304000
+#define DDR_PHY2_ROOT		0x66340000
+
+/*******************************************************************************
+ * TZC400 related constants
+ ******************************************************************************/
+#define TZC_400_BASE		0x66d84000
+
+/*******************************************************************************
+ * FS4 related constants
+ ******************************************************************************/
+#define FS4_SRAM_IDM_IO_CONTROL_DIRECT	 0x66d8a408
+
+#define FS4_CRYPTO_IDM_IO_CONTROL_DIRECT 0x66d8e408
+#define FS4_CRYPTO_IDM_RESET_CONTROL	 0x66d8e800
+#define FS4_CRYPTO_BASE			 0x67000000
+#define FS4_CRYPTO_DME_BASE		 (FS4_CRYPTO_BASE + 0x280000)
+
+#define FS4_RAID_IDM_IO_CONTROL_DIRECT	 0x66d8f408
+#define FS4_RAID_IDM_IO_STATUS		 0x66d8f500
+#define FS4_RAID_IDM_RESET_CONTROL	 0x66d8f800
+#define FS4_RAID_BASE			 0x67400000
+#define FS4_RAID_DME_BASE		 (FS4_RAID_BASE + 0x280000)
+
+#define FS4_CRYPTO_GPV_BASE		 0x67300000
+#define FS4_RAID_GPV_BASE		 0x67700000
+
+#define FS6_PKI_BASE			0x67400000
+#define FS6_PKI_DME_BASE		0x66D90000
+
+#define TZC400_FS_SRAM_ROOT		 0x66d84000
+#define GATE_KEEPER_OFFSET		 0x8
+#define REGION_ATTRIBUTES_0_OFFSET	 0x110
+#define REGION_ID_ACCESS_0_OFFSET	 0x114
+
+#define NIC400_FS_NOC_ROOT		 0x66e00000
+#define NIC400_FS_NOC_SECURITY2_OFFSET	 0x10
+#define NIC400_FS_NOC_SECURITY4_OFFSET	 0x18
+#define NIC400_FS_NOC_SECURITY7_OFFSET	 0x24
+
+/*******************************************************************************
+ * SATA PHY related constants
+ ******************************************************************************/
+#define SATA_BASE	0x67d00000
+
+/*******************************************************************************
+ * USB related constants
+ ******************************************************************************/
+#define USB_BASE	0x68500000
+#define USB_SIZE	0x00400000
+#define XHC_BASE	(USB_BASE + 0x11000)
+#define MAX_USB_PORTS	3
+
+/*******************************************************************************
+ * HSLS related constants
+ ******************************************************************************/
+#define IPROC_ROOT		0x68900000
+#define HSLS_ICFG_REGS_BASE	IPROC_ROOT
+#define HSLS_IDM_REGS_BASE	0x68e00000
+#define HSLS_MODE_SEL_CONTROL	0x68a40000
+#define HSLS_TZPC_BASE		0x68b40000
+#define HSLS_GPV_BASE		0x6cd00000
+
+/*******************************************************************************
+ * Chip ID related constants
+ ******************************************************************************/
+#define ICFG_CHIP_ID		HSLS_ICFG_REGS_BASE
+#define CHIP_ID_SR		0xd730
+#define CHIP_ID_NS3Z		0xe56d
+#define CHIP_ID_MASK		0xf000
+#define ICFG_CHIP_REVISION_ID	(HSLS_ICFG_REGS_BASE + 0x4)
+#define PLAT_CHIP_ID_GET	(mmio_read_32(ICFG_CHIP_ID))
+#define PLAT_CHIP_REV_GET	(mmio_read_32(ICFG_CHIP_REVISION_ID))
+
+/*******************************************************************************
+ * Timers related constants
+ ******************************************************************************/
+/* ChipcommonG_tim0_TIM_TIMER1Load 0x68930000 */
+#define SP804_TIMER0_BASE	0x68930000
+#define SP804_TIMER1_BASE	0x68940000
+#define SP804_TIMER0_TIMER_VAL_REG_OFFSET 0x4
+#define SP804_TIMER0_CLKMULT	2
+#define SP804_TIMER0_CLKDIV	25
+
+/*******************************************************************************
+ * GPIO related constants
+ ******************************************************************************/
+#define IPROC_GPIO_NS_BASE	0x689d0000
+#define IPROC_GPIO_S_BASE	0x68b00000
+#define IPROC_GPIO_NR		151
+#define GPIO_S_CNTRL_REG	0x68b60000
+
+/*******************************************************************************
+ * I2C SMBUS related constants
+ ******************************************************************************/
+#define SMBUS0_REGS_BASE	0x689b0000
+#define SMBUS1_REGS_BASE	0x689e0000
+
+/*******************************************************************************
+ * UART related constants
+ ******************************************************************************/
+#define ChipcommonG_UART0_UART_RBR_THR_DLL	0x68a00000
+#define ChipcommonG_UART1_UART_RBR_THR_DLL	0x68a10000
+#define ChipcommonG_UART2_UART_RBR_THR_DLL	0x68a20000
+#define ChipcommonG_UART3_UART_RBR_THR_DLL	0x68a30000
+
+#define UART0_BASE_ADDR		ChipcommonG_UART0_UART_RBR_THR_DLL
+#define UART1_BASE_ADDR		ChipcommonG_UART1_UART_RBR_THR_DLL
+#define UART2_BASE_ADDR		ChipcommonG_UART2_UART_RBR_THR_DLL
+#define UART3_BASE_ADDR		ChipcommonG_UART3_UART_RBR_THR_DLL
+
+#define UART_SPR_OFFSET		0x1c    /* Scratch Pad Register */
+
+#define LOG_LEVEL_REGISTER	CRMU_SPARE_REG_3
+#define GET_LOG_LEVEL()		(mmio_read_32(LOG_LEVEL_REGISTER))
+#define SET_LOG_LEVEL(x)	(mmio_write_32(LOG_LEVEL_REGISTER, x))
+
+#define IO_RETRY_REGISTER	CRMU_SPARE_REG_4
+
+#define DWC_UART_REFCLK		(25 * 1000 * 1000)
+#define DWC_UART_REFCLK_DIV	16
+/* Baud rate in emulation will vary based on setting of 25MHz SCLK */
+#define DWC_UART_BAUDRATE	115200
+
+#define BRCM_CRASH_CONSOLE_BASE		UART1_BASE_ADDR
+#define BRCM_CRASH_CONSOLE_REFCLK	DWC_UART_REFCLK
+#define BRCM_CRASH_CONSOLE_BAUDRATE	DWC_UART_BAUDRATE
+
+#ifdef BOARD_CONSOLE_UART
+#define PLAT_BRCM_BOOT_UART_BASE	BOARD_CONSOLE_UART
+#else
+#define PLAT_BRCM_BOOT_UART_BASE	UART1_BASE_ADDR
+#endif
+#define CONSOLE_UART_ID	((PLAT_BRCM_BOOT_UART_BASE >> 16) & 0x3)
+
+#define PLAT_BRCM_BOOT_UART_CLK_IN_HZ	DWC_UART_REFCLK
+#define BRCM_CONSOLE_BAUDRATE		DWC_UART_BAUDRATE
+
+#define PLAT_BRCM_BL31_RUN_UART_BASE	 PLAT_BRCM_BOOT_UART_BASE
+#define PLAT_BRCM_BL31_RUN_UART_CLK_IN_HZ PLAT_BRCM_BOOT_UART_CLK_IN_HZ
+
+/*******************************************************************************
+ * IOMUX related constants
+ ******************************************************************************/
+#define HSLS_IOPAD_BASE			HSLS_MODE_SEL_CONTROL
+#define MODE_SEL_CONTROL_FSEL_MASK	0x7
+#define MODE_SEL_CONTROL_FSEL_MODE0	0x0
+#define MODE_SEL_CONTROL_FSEL_MODE1	0x1
+#define MODE_SEL_CONTROL_FSEL_MODE2	0x2
+#define MODE_SEL_CONTROL_FSEL_MODE3	0x3
+#define MODE_SEL_CONTROL_FSEL_DEBUG	0x4
+#define IPROC_IOPAD_MODE_BASE		(HSLS_MODE_SEL_CONTROL + 0x29c)
+#define UART0_SIN_MODE_SEL_CONTROL	(HSLS_MODE_SEL_CONTROL + 0x4a8)
+#define UART0_SOUT_MODE_SEL_CONTROL	(HSLS_MODE_SEL_CONTROL + 0x4ac)
+#define UART1_SIN_MODE_SEL_CONTROL	(HSLS_MODE_SEL_CONTROL + 0x3b8)
+#define UART1_SOUT_MODE_SEL_CONTROL	(HSLS_MODE_SEL_CONTROL + 0x3bc)
+#define UARTx_SIN_MODE_SEL_CONTROL_FSEL		0
+#define UARTx_SOUT_MODE_SEL_CONTROL_FSEL	0
+
+/*******************************************************************************
+ * PKA constants
+ ******************************************************************************/
+#define ICFG_PKA_MEM_PWR_CTRL			(HSLS_ICFG_REGS_BASE + 0xac0)
+#define ICFG_PKA_MEM_PWR_CTRL__POWERONIN	BIT(0)
+#define ICFG_PKA_MEM_PWR_CTRL__POWEROKIN	BIT(1)
+#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONIN	BIT(2)
+#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKIN	BIT(3)
+#define ICFG_PKA_MEM_PWR_CTRL__POWERONOUT	BIT(4)
+#define ICFG_PKA_MEM_PWR_CTRL__POWEROKOUT	BIT(5)
+#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONOUT	BIT(6)
+#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKOUT	BIT(7)
+#define ICFG_PKA_MEM_PWR_CTRL__ISO		BIT(8)
+
+/*******************************************************************************
+ * Trusted Watchdog constants
+ ******************************************************************************/
+#define ARM_SP805_TWDG_BASE		0x68b30000
+#define ARM_SP805_TWDG_CLK_HZ		((25 * 1000 * 1000) / 2)
+/*
+ * The TBBR document specifies a watchdog timeout of 256 seconds. SP805
+ * asserts reset after two consecutive countdowns (2 x 128 = 256 sec)
+ */
+#define ARM_TWDG_TIMEOUT_SEC		128
+#define ARM_TWDG_LOAD_VAL		(ARM_SP805_TWDG_CLK_HZ * \
+					 ARM_TWDG_TIMEOUT_SEC)
+
+/*******************************************************************************
+ * SOTP related constants
+ ******************************************************************************/
+#define SOTP_REGS_OTP_BASE		0x68b50000
+#define SOTP_CHIP_CTRL			(SOTP_REGS_OTP_BASE + 0x4c)
+#define SOTP_CLEAR_SYSCTRL_ALL_MASTER_NS  0
+
+/*******************************************************************************
+ * DMAC/PL330 related constants
+ ******************************************************************************/
+#define DMAC_M0_IDM_IO_CONTROL_DIRECT	(HSLS_IDM_REGS_BASE + 0x408)
+#define BOOT_MANAGER_NS			BIT(25)
+#define DMAC_M0_IDM_RESET_CONTROL	(HSLS_IDM_REGS_BASE + 0x800)
+#define ICFG_DMAC_CONFIG_0		(HSLS_ICFG_REGS_BASE + 0x190)
+#define ICFG_DMAC_CONFIG_1		(HSLS_ICFG_REGS_BASE + 0x194)
+#define ICFG_DMAC_CONFIG_2		(HSLS_ICFG_REGS_BASE + 0x198)
+#define BOOT_PERIPHERAL_NS		0xffffffff
+#define ICFG_DMAC_CONFIG_3		(HSLS_ICFG_REGS_BASE + 0x19c)
+#define BOOT_IRQ_NS			0x0000ffff
+#define ICFG_DMAC_SID_ARADDR_CONTROL	(HSLS_ICFG_REGS_BASE + 0xaf0)
+#define ICFG_DMAC_SID_AWADDR_CONTROL	(HSLS_ICFG_REGS_BASE + 0xaf4)
+#define ICFG_DMAC_MEM_PWR_CTRL__POWERONIN	BIT(0)
+#define ICFG_DMAC_MEM_PWR_CTRL__POWEROKIN	BIT(1)
+#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONIN	BIT(2)
+#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKIN	BIT(3)
+#define ICFG_DMAC_MEM_PWR_CTRL__POWERONOUT	BIT(4)
+#define ICFG_DMAC_MEM_PWR_CTRL__POWEROKOUT	BIT(5)
+#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONOUT	BIT(6)
+#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKOUT	BIT(7)
+#define ICFG_DMAC_MEM_PWR_CTRL__ISO		BIT(8)
+#define ICFG_DMAC_MEM_PWR_CTRL		(HSLS_ICFG_REGS_BASE + 0xadc)
+
+/*******************************************************************************
+ * PNOR related constants
+ ******************************************************************************/
+#define PNOR_ICFG_BASE			(HSLS_ICFG_REGS_BASE + 0x780)
+#define PNOR_ICFG_CS_0			PNOR_ICFG_BASE
+#define PNOR_ICFG_CS_1			(PNOR_ICFG_BASE + 0x4)
+#define PNOR_ICFG_CS_2			(PNOR_ICFG_BASE + 0x8)
+#define PNOR_ICFG_CS_x_MASK0_MASK	0xff
+#define PNOR_ICFG_CS_x_MASK0_SHIFT	8
+#define PNOR_ICFG_CS_x_MATCH0_MASK	0xff
+#define PNOR_ICFG_CS_x_MATCH0_SHIFT	0
+
+#define PNOR_IDM_BASE			(HSLS_IDM_REGS_BASE + 0xb000)
+#define PNOR_IDM_IO_CONTROL_DIRECT	(PNOR_IDM_BASE + 0x408)
+#define PNOR_IDM_IO_RESET_CONTROL	(PNOR_IDM_BASE + 0x800)
+
+#define PNOR_REG_BASE			0x68c50000
+#define PNOR_REG_DIRECT_CMD		(PNOR_REG_BASE + 0x010)
+#define PNOR_REG_SET_CYCLES		(PNOR_REG_BASE + 0x014)
+#define PNOR_REG_SET_OPMODE		(PNOR_REG_BASE + 0x018)
+#define PNOR_REG_REFRESH_0		(PNOR_REG_BASE + 0x020)
+#define PNOR_REG_PERIPH_ID0		(PNOR_REG_BASE + 0xfe0)
+#define PNOR_REG_PERIPH_ID1		(PNOR_REG_BASE + 0xfe4)
+#define PNOR_REG_PERIPH_ID2		(PNOR_REG_BASE + 0xfe8)
+#define PNOR_REG_PERIPH_ID3		(PNOR_REG_BASE + 0xfec)
+#define PNOR_REG_PERIPH_IDx_MASK	0xff
+
+/*******************************************************************************
+ * NAND related constants
+ ******************************************************************************/
+#define NAND_FLASH_REVISION		0x68c60000
+#define NAND_IDM_IDM_IO_CONTROL_DIRECT	(HSLS_IDM_REGS_BASE + 0xa408)
+#define NAND_IDM_IDM_RESET_CONTROL	(HSLS_IDM_REGS_BASE + 0xa800)
+
+/*******************************************************************************
+ * eMMC related constants
+ ******************************************************************************/
+#define PLAT_SD_MAX_READ_LENGTH		0x400
+
+#define SDIO0_EMMCSDXC_SYSADDR		0x68cf1000
+#define SDIO_IDM0_IO_CONTROL_DIRECT	(HSLS_IDM_REGS_BASE + 0x2408)
+#define SDIO_IDM1_IO_CONTROL_DIRECT	(HSLS_IDM_REGS_BASE + 0x3408)
+#define SDIO_IDM0_IDM_RESET_CONTROL	(HSLS_IDM_REGS_BASE + 0x2800)
+#define ICFG_SDIO0_BASE			(HSLS_ICFG_REGS_BASE + 0x6e4)
+#define ICFG_SDIO1_BASE			(HSLS_ICFG_REGS_BASE + 0x734)
+#define ICFG_SDIO0_CAP0			(ICFG_SDIO0_BASE + 0x10)
+#define ICFG_SDIO0_CAP1			(ICFG_SDIO0_BASE + 0x14)
+#define ICFG_SDIO0_SID			(HSLS_ICFG_REGS_BASE + 0xb00)
+#define ICFG_SDIO1_SID			(HSLS_ICFG_REGS_BASE + 0xb08)
+
+/*******************************************************************************
+ * Bootstrap related constants
+ ******************************************************************************/
+#define ROM_S0_IDM_IO_STATUS		(HSLS_IDM_REGS_BASE + 0x9500)
+
+/*******************************************************************************
+ * ROM related constants
+ ******************************************************************************/
+#define ROM_BASE_ADDR		0x6ce00000
+#define ROM_VERSION_STRING_ADDR	(ROM_BASE_ADDR + 0x28000)
+#define ROM_BUILD_MESSAGE_ADDR	(ROM_BASE_ADDR + 0x28018)
+
+/*******************************************************************************
+ * Boot source peripheral related constants
+ ******************************************************************************/
+#define QSPI_CTRL_BASE_ADDR	0x68c70000
+#define QSPI_BASE_ADDR		0x70000000
+#define QSPI_SIZE		0x08000000
+#define NOR_BASE_ADDR		0x74000000
+#define NOR_SIZE		0x04000000
+#define NAND_BASE_ADDR		0x78000000
+#define NAND_SIZE		0x08000000
+
+#define QSPI_IDM_RESET_CONTROL		(HSLS_IDM_REGS_BASE + 0xc800)
+
+#define APBR_IDM_RESET_CONTROL		(HSLS_IDM_REGS_BASE + 0xe800)
+#define APBS_IDM_IDM_RESET_CONTROL	(HSLS_IDM_REGS_BASE + 0xf800)
+
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT	(HSLS_IDM_REGS_BASE + 0x10408)
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE	0
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_WDOG_SCLK_SEL	2
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM0_SCLK_SEL	4
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM1_SCLK_SEL	6
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM2_SCLK_SEL	8
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM3_SCLK_SEL	10
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM4_SCLK_SEL	12
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM5_SCLK_SEL	13
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM6_SCLK_SEL	14
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM7_SCLK_SEL	15
+
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT	(HSLS_IDM_REGS_BASE + 0x11408)
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE	0
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART0_SCLK_SEL	2
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART1_SCLK_SEL	4
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART2_SCLK_SEL	6
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART3_SCLK_SEL	8
+
+#define APBZ_IDM_IDM_IO_CONTROL_DIRECT	(HSLS_IDM_REGS_BASE + 0x12408)
+#define APBZ_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE	0
+#define APBZ_IDM_IDM_IO_CONTROL_DIRECT_WDOG_SCLK_SEL	2
+
+/*******************************************************************************
+ * Stingray memory map related constants
+ ******************************************************************************/
+
+/* The last 4KB of Trusted SRAM are used as shared memory */
+#define BRCM_SHARED_RAM_SIZE		0x0
+#define BRCM_SHARED_RAM_BASE		(PLAT_BRCM_TRUSTED_SRAM_BASE + \
+					 PLAT_BRCM_TRUSTED_SRAM_SIZE - \
+					 BRCM_SHARED_RAM_SIZE)
+
+/* Reserve 4 KB to store error logs in BL2 */
+#define BCM_ELOG_BL2_SIZE		0x00001000
+#define BCM_ELOG_BL2_BASE		BL1_RW_LIMIT
+
+/* The remaining Trusted SRAM is used to load the BL images */
+#define BRCM_BL_RAM_BASE		(PLAT_BRCM_TRUSTED_SRAM_BASE)
+#define BRCM_BL_RAM_SIZE		(PLAT_BRCM_TRUSTED_SRAM_SIZE - \
+					 BRCM_SHARED_RAM_SIZE)
+
+/* DDR Address where TMON temperature values are written */
+#define TMON_SHARED_DDR_ADDRESS		0x8f100000
+
+/* Reserve 4 kB to pass data to BL33 */
+#define BL33_SHARED_DDR_BASE		0x8f102000
+#define BL33_SHARED_DDR_SIZE		0x1000
+
+/* Default AP error logging base addr */
+#ifndef ELOG_AP_UART_LOG_BASE
+#define ELOG_AP_UART_LOG_BASE		0x8f110000
+#endif
+
+/* Reserve 16 to store error logs in BL31 */
+#define BCM_ELOG_BL31_BASE		ELOG_AP_UART_LOG_BASE
+#define BCM_ELOG_BL31_SIZE		0x4000
+
+/*******************************************************************************
+ * Non-secure DDR Map
+ ******************************************************************************/
+#define BRCM_DRAM1_BASE		ULL(0x80000000)
+#define BRCM_DRAM1_SIZE		ULL(0x10000000)
+#define BRCM_DRAM2_BASE		ULL(0x880000000)
+#define BRCM_DRAM2_SIZE		ULL(0x780000000)
+#define BRCM_DRAM3_BASE		ULL(0x8800000000)
+#define BRCM_DRAM3_SIZE		ULL(0x7800000000)
+#define BRCM_SHARED_DRAM_BASE	BL33_SHARED_DDR_BASE
+#define BRCM_SHARED_DRAM_SIZE	BL33_SHARED_DDR_SIZE
+#define BRCM_EXT_SRAM_BASE	ULL(0x74000000)
+#define BRCM_EXT_SRAM_SIZE	ULL(0x4000000)
+
+/* Priority levels for platforms */
+#define PLAT_RAS_PRI			0x10
+#define PLAT_SDEI_CRITICAL_PRI		0x60
+#define PLAT_SDEI_NORMAL_PRI		0x70
+
+/* Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 */
+#define BRCM_IRQ_SEC_SGI_0	14
+#define BRCM_IRQ_SEC_SGI_1	15
+
+/* RTC periodic interrupt */
+#define BRCM_IRQ_SEC_SPI_0	49
+
+/*
+ *  Macros for local power states in SR platforms encoded by State-ID field
+ *  within the power-state parameter.
+ */
+
+/* Local power state for power domains in Run state. */
+#define PLAT_LOCAL_STATE_RUN	0
+
+/* Local power state for retention. Valid only for CPU power domains */
+#define PLAT_LOCAL_STATE_RET	1
+
+/*
+ * Local power state for OFF/power-down. Valid for CPU and cluster power
+ * domains.
+ */
+#define PLAT_LOCAL_STATE_OFF	2
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE	PLAT_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE	PLAT_LOCAL_STATE_OFF
+
+/* ChiMP-related constants */
+
+#define NITRO_TZPC_TZPCDECPROT0clr		0x60c01808
+#define NITRO_TZPC_TZPCDECPROT0clr__DECPROT0_chimp_m_clr_R		1
+
+#define NIC400_NITRO_CHIMP_S_IDM_IO_CONTROL_DIRECT		0x60e00408
+
+#define CHIMP_INDIRECT_ADDR_MASK		0x3fffff
+#define CHIMP_INDIRECT_BASE		0x60800000
+
+#define CHIMP_REG_ECO_RESERVED		0x3042400
+
+#define CHIMP_FLASH_ACCESS_DONE_BIT		2
+
+/* indicate FRU table programming is done successfully */
+#define CHIMP_FRU_PROG_DONE_BIT			9
+
+#define CHIMP_REG_CTRL_BPE_MODE_REG		0x0
+#define CHIMP_REG_CTRL_BPE_STAT_REG		0x4
+#define CHIMP_REG_CTRL_FSTBOOT_PTR_REG		0x8
+#define CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_L		1
+#define CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_R		1
+#define CHIMP_REG_CTRL_BASE		0x3040000
+#define CHIMP_FAST_BOOT_MODE_BIT		2
+#define CHIMP_REG_CHIMP_APE_SCPAD		0x3300000
+#define CHIMP_REG_CHIMP_SCPAD		0x3100000
+
+/* Chimp health status offset in scratch pad ram */
+#define CHIMP_HEALTH_STATUS_OFFSET	0x8
+/*
+ * If not in NIC mode then FASTBOOT can be enabled.
+ *  "Not in NIC mode" means that FORCE_FASTBOOT is set
+ *  and a valid (1 or 2) fastboot type is specified.
+ *
+ *  Three types of fastboot are supported:
+ *  0 = No fastboot. Boots Nitro/ChiMP and lets ROM loader
+ *		initialize ChiMP from NVRAM (QSPI).
+ *
+ *  1 = Jump in place (need a flat image)
+ *		This is intended to speedup Nitro FW boot on Palladium,
+ *		can be used with a real chip as well.
+ *  2 = Jump normally with decompression
+ *		Modus operandi for a real chip. Works also on Palladium
+ *		Note: image decompressing takes time on Palladium.
+ *  3 = No fastboot support. No ChiMP bringup
+ *		(use only for AP debug or for ChiMP's deferred setup).
+ */
+#define CHIMP_FASTBOOT_JUMP_DECOMPRESS		2
+#define CHIMP_FASTBOOT_JUMP_IN_PLACE		1
+#define CHIMP_FASTBOOT_NITRO_RESET		0
+/*
+ * Definitions for a non-Nitro access
+ * to QSPI PAD after the handshake
+ */
+#define	QSPI_HOLD_N_MODE_SEL_CONTROL		(HSLS_MODE_SEL_CONTROL + 0x3e8)
+#define QSPI_WP_N_MODE_SEL_CONTROL		(HSLS_MODE_SEL_CONTROL + 0x3ec)
+#define QSPI_SCK_MODE_SEL_CONTROL		(HSLS_MODE_SEL_CONTROL + 0x3f0)
+#define QSPI_CS_N_MODE_SEL_CONTROL		(HSLS_MODE_SEL_CONTROL + 0x3f4)
+#define QSPI_MOSI_MODE_SEL_CONTROL		(HSLS_MODE_SEL_CONTROL + 0x3f8)
+#define QSPI_MISO_MODE_SEL_CONTROL		(HSLS_MODE_SEL_CONTROL + 0x3fc)
+
+/*******************************************************************************
+ * Stream IDs for different blocks of SR
+ * block_id for different blocks is as follows:
+ * PCIE		: 0x0
+ * PAXC		: 0x1
+ * FS4		: 0x2
+ * Rest of the masters(includes MHB via RNI): 0x3
+ ******************************************************************************/
+#define SR_SID_VAL(block_id, subblock_id, device_num)	((block_id << 13) | \
+							(subblock_id << 11) | \
+							(device_num))
+
+#define CRMU_STREAM_ID		SR_SID_VAL(0x3, 0x0, 0x7)
+#define CRMU_SID_SHIFT		5
+
+#define DMAC_STREAM_ID		SR_SID_VAL(0x3, 0x0, 0x0)
+#define DMAC_SID_SHIFT		5
+
+/* DDR SHMOO Values defines */
+#define IDRAM_SHMOO_VALUES_ADDR CRMU_IDRAM_BASE_ADDR
+#define DDR_SHMOO_VALUES_ADDR 0x8f103000
+#define SHMOO_SIZE_PER_CHANNEL 0x1000
+
+#endif /* SR_DEF_H */
diff --git a/plat/brcm/board/stingray/platform.mk b/plat/brcm/board/stingray/platform.mk
new file mode 100644
index 0000000..1b9cc3b
--- /dev/null
+++ b/plat/brcm/board/stingray/platform.mk
@@ -0,0 +1,48 @@
+#
+# Copyright (c) 2019-2020, Broadcom
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Enable workaround for ERRATA_A72_859971
+ERRATA_A72_859971 := 1
+
+# Cache Coherency Interconnect Driver needed
+DRIVER_CC_ENABLE := 1
+$(eval $(call add_define,DRIVER_CC_ENABLE))
+
+USE_CRMU_SRAM := yes
+
+# Use single cluster
+ifeq (${USE_SINGLE_CLUSTER},yes)
+$(info Using Single Cluster)
+$(eval $(call add_define,USE_SINGLE_CLUSTER))
+endif
+
+ifeq (${BOARD_CFG},)
+BOARD_CFG := bcm958742k
+endif
+
+# For testing purposes, use memsys stubs.  Remove once memsys is fully tested.
+USE_MEMSYS_STUBS := yes
+
+# Default, use BL1_RW area
+ifneq (${BL2_USE_BL1_RW},no)
+$(eval $(call add_define,USE_BL1_RW))
+endif
+
+# Default soft reset is L3
+$(eval $(call add_define,CONFIG_SOFT_RESET_L3))
+
+include plat/brcm/board/common/board_common.mk
+
+SOC_DIR			:= 	brcm/board/stingray
+
+PLAT_INCLUDES		+=	-Iplat/${SOC_DIR}/include/ \
+				-Iinclude/plat/brcm/common/ \
+				-Iplat/brcm/common/
+
+PLAT_BL_COMMON_SOURCES	+=	lib/cpus/aarch64/cortex_a72.S \
+				plat/${SOC_DIR}/aarch64/plat_helpers.S \
+				drivers/ti/uart/aarch64/16550_console.S \
+				drivers/arm/tzc/tzc400.c
diff --git a/plat/brcm/common/brcm_bl2_mem_params_desc.c b/plat/brcm/common/brcm_bl2_mem_params_desc.c
new file mode 100644
index 0000000..f711354
--- /dev/null
+++ b/plat/brcm/common/brcm_bl2_mem_params_desc.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/bl_common.h>
+#include <common/desc_image_load.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+/*******************************************************************************
+ * Following descriptor provides BL image/ep information that gets used
+ * by BL2 to load the images and also subset of this information is
+ * passed to next BL image. The image loading sequence is managed by
+ * populating the images in required loading order. The image execution
+ * sequence is managed by populating the `next_handoff_image_id` with
+ * the next executable image id.
+ ******************************************************************************/
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+#ifdef SCP_BL2_BASE
+	/* Fill SCP_BL2 related information if it exists */
+	{
+	    .image_id = SCP_BL2_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, image_info_t, 0),
+	    .image_info.image_base = SCP_BL2_BASE,
+	    .image_info.image_max_size = PLAT_MAX_SCP_BL2_SIZE,
+
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+#endif /* SCP_BL2_BASE */
+
+	/* Fill BL31 related information */
+	{
+	    .image_id = BL31_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t,
+		    SECURE | EXECUTABLE | EP_FIRST_EXE),
+	    .ep_info.pc = BL31_BASE,
+	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+		    DISABLE_ALL_EXCEPTIONS),
+#if DEBUG
+	    .ep_info.args.arg3 = BRCM_BL31_PLAT_PARAM_VAL,
+#endif
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+	    .image_info.image_base = BL31_BASE,
+	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+
+#ifdef BL32_BASE
+	    .next_handoff_image_id = BL32_IMAGE_ID,
+#else
+	    .next_handoff_image_id = BL33_IMAGE_ID,
+#endif
+	},
+
+#ifdef BL32_BASE
+	/* Fill BL32 related information */
+	{
+	    .image_id = BL32_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+	    .ep_info.pc = BL32_BASE,
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, 0),
+	    .image_info.image_base = BL32_BASE,
+	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+
+	    .next_handoff_image_id = BL33_IMAGE_ID,
+	},
+#endif /* BL32_BASE */
+
+	/* Fill BL33 related information */
+	{
+	    .image_id = BL33_IMAGE_ID,
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+#ifdef PRELOADED_BL33_BASE
+	    .ep_info.pc = PRELOADED_BL33_BASE,
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+#else
+	    .ep_info.pc = PLAT_BRCM_NS_IMAGE_OFFSET,
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, 0),
+	    .image_info.image_base = PLAT_BRCM_NS_IMAGE_OFFSET,
+	    .image_info.image_max_size = BRCM_DRAM1_SIZE,
+#endif /* PRELOADED_BL33_BASE */
+
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+	}
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
diff --git a/plat/brcm/common/brcm_bl2_setup.c b/plat/brcm/common/brcm_bl2_setup.c
new file mode 100644
index 0000000..9a7153b
--- /dev/null
+++ b/plat/brcm/common/brcm_bl2_setup.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <drivers/arm/sp804_delay_timer.h>
+#include <lib/mmio.h>
+
+#include <bcm_console.h>
+#include <platform_def.h>
+#include <plat/brcm/common/plat_brcm.h>
+
+/* Data structure which holds the extents of the trusted SRAM for BL2 */
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+/* Weak definitions may be overridden in specific BRCM platform */
+#pragma weak plat_bcm_bl2_platform_setup
+#pragma weak plat_bcm_bl2_plat_arch_setup
+#pragma weak plat_bcm_security_setup
+#pragma weak plat_bcm_bl2_plat_handle_scp_bl2
+#pragma weak plat_bcm_bl2_early_platform_setup
+
+void plat_bcm_bl2_early_platform_setup(void)
+{
+}
+
+void plat_bcm_bl2_platform_setup(void)
+{
+}
+
+void plat_bcm_bl2_plat_arch_setup(void)
+{
+}
+
+void plat_bcm_security_setup(void)
+{
+}
+
+void bcm_bl2_early_platform_setup(uintptr_t tb_fw_config,
+				  meminfo_t *mem_layout)
+{
+	/* Initialize the console to provide early debug support */
+	bcm_console_boot_init();
+
+	/* Setup the BL2 memory layout */
+	bl2_tzram_layout = *mem_layout;
+
+	/* Initialise the IO layer and register platform IO devices */
+	plat_brcm_io_setup();
+
+	/* Log HW reset event */
+	INFO("RESET: 0x%x\n",
+		mmio_read_32(CRMU_RESET_EVENT_LOG));
+}
+
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			       u_register_t arg2, u_register_t arg3)
+{
+	/* SoC specific setup */
+	plat_bcm_bl2_early_platform_setup();
+
+	/* Initialize delay timer driver using SP804 dual timer 0 */
+	sp804_timer_init(SP804_TIMER0_BASE,
+			 SP804_TIMER0_CLKMULT, SP804_TIMER0_CLKDIV);
+
+	/* BRCM platforms generic setup */
+	bcm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
+}
+
+/*
+ * Perform Broadcom platform setup.
+ */
+void bcm_bl2_platform_setup(void)
+{
+	/* Initialize the secure environment */
+	plat_bcm_security_setup();
+}
+
+void bl2_platform_setup(void)
+{
+	bcm_bl2_platform_setup();
+	plat_bcm_bl2_platform_setup();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only initializes the mmu in a quick and dirty way.
+ ******************************************************************************/
+void bcm_bl2_plat_arch_setup(void)
+{
+#ifndef MMU_DISABLED
+	if (!(read_sctlr_el1() & SCTLR_M_BIT)) {
+		const mmap_region_t bl_regions[] = {
+			MAP_REGION_FLAT(bl2_tzram_layout.total_base,
+					bl2_tzram_layout.total_size,
+					MT_MEMORY | MT_RW | MT_SECURE),
+			MAP_REGION_FLAT(BL_CODE_BASE,
+					BL_CODE_END - BL_CODE_BASE,
+					MT_CODE | MT_SECURE),
+			MAP_REGION_FLAT(BL_RO_DATA_BASE,
+					BL_RO_DATA_END - BL_RO_DATA_BASE,
+					MT_RO_DATA | MT_SECURE),
+#if USE_COHERENT_MEM
+			MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
+					BL_COHERENT_RAM_END -
+					BL_COHERENT_RAM_BASE,
+					MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+			{0}
+		};
+
+		setup_page_tables(bl_regions, plat_brcm_get_mmap());
+		enable_mmu_el1(0);
+	}
+#endif
+}
+
+void bl2_plat_arch_setup(void)
+{
+#ifdef ENA_MMU_BEFORE_DDR_INIT
+	/*
+	 * Once MMU is enabled before DDR, MEMORY TESTS
+	 * get affected as read/write transaction might occures from
+	 * caches. So For running memory test, one should not set this
+	 * flag.
+	 */
+	bcm_bl2_plat_arch_setup();
+	plat_bcm_bl2_plat_arch_setup();
+#else
+	plat_bcm_bl2_plat_arch_setup();
+	bcm_bl2_plat_arch_setup();
+#endif
+}
+
+int bcm_bl2_handle_post_image_load(unsigned int image_id)
+{
+	int err = 0;
+
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+
+	assert(bl_mem_params);
+
+	switch (image_id) {
+	case BL32_IMAGE_ID:
+		bl_mem_params->ep_info.spsr = brcm_get_spsr_for_bl32_entry();
+		break;
+
+	case BL33_IMAGE_ID:
+		/* BL33 expects to receive the primary CPU MPID (through r0) */
+		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+		bl_mem_params->ep_info.spsr = brcm_get_spsr_for_bl33_entry();
+		break;
+
+#ifdef SCP_BL2_BASE
+	case SCP_BL2_IMAGE_ID:
+		/* The subsequent handling of SCP_BL2 is platform specific */
+		err = bcm_bl2_handle_scp_bl2(&bl_mem_params->image_info);
+		if (err)
+			WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
+		break;
+#endif
+	default:
+		/* Do nothing in default case */
+		break;
+	}
+
+	return err;
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bcm_bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return bcm_bl2_handle_post_image_load(image_id);
+}
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return bcm_bl2_plat_handle_post_image_load(image_id);
+}
+
+#ifdef SCP_BL2_BASE
+int plat_bcm_bl2_plat_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+	return 0;
+}
+
+int bcm_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+	return plat_bcm_bl2_plat_handle_scp_bl2(scp_bl2_image_info);
+}
+#endif
diff --git a/plat/brcm/common/brcm_common.c b/plat/brcm/common/brcm_common.c
new file mode 100644
index 0000000..f23719d
--- /dev/null
+++ b/plat/brcm/common/brcm_common.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <plat/common/platform.h>
+
+#include <plat_brcm.h>
+#include <platform_def.h>
+
+/* Weak definitions may be overridden in specific BRCM platform */
+#pragma weak plat_get_ns_image_entrypoint
+#pragma weak plat_brcm_get_mmap
+
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+#ifdef PRELOADED_BL33_BASE
+	return PRELOADED_BL33_BASE;
+#else
+	return PLAT_BRCM_NS_IMAGE_OFFSET;
+#endif
+}
+
+uint32_t brcm_get_spsr_for_bl32_entry(void)
+{
+	/*
+	 * The Secure Payload Dispatcher service is responsible for
+	 * setting the SPSR prior to entry into the BL32 image.
+	 */
+	return 0;
+}
+
+uint32_t brcm_get_spsr_for_bl33_entry(void)
+{
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	mode = el_implemented(2) ? MODE_EL2 : MODE_EL1;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
+const mmap_region_t *plat_brcm_get_mmap(void)
+{
+	return plat_brcm_mmap;
+}
diff --git a/plat/brcm/common/brcm_image_load.c b/plat/brcm/common/brcm_image_load.c
new file mode 100644
index 0000000..ba02bda
--- /dev/null
+++ b/plat/brcm/common/brcm_image_load.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/bl_common.h>
+#include <common/desc_image_load.h>
+#include <plat/common/platform.h>
+
+#pragma weak plat_flush_next_bl_params
+#pragma weak plat_get_bl_image_load_info
+#pragma weak plat_get_next_bl_params
+
+/*******************************************************************************
+ * This function flushes the data structures so that they are visible
+ * in memory for the next BL image.
+ ******************************************************************************/
+void plat_flush_next_bl_params(void)
+{
+	flush_bl_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of loadable images.
+ ******************************************************************************/
+struct bl_load_info *plat_get_bl_image_load_info(void)
+{
+	return get_bl_load_info_from_mem_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images.
+ ******************************************************************************/
+struct bl_params *plat_get_next_bl_params(void)
+{
+	bl_params_t *next_bl_params = get_next_bl_params_from_mem_params_desc();
+
+	populate_next_bl_params_config(next_bl_params);
+	return next_bl_params;
+}
diff --git a/plat/brcm/common/brcm_io_storage.c b/plat/brcm/common/brcm_io_storage.c
new file mode 100644
index 0000000..66ec292
--- /dev/null
+++ b/plat/brcm/common/brcm_io_storage.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <common/debug.h>
+#include <drivers/io/io_driver.h>
+#include <drivers/io/io_fip.h>
+#include <drivers/io/io_memmap.h>
+#include <drivers/io/io_storage.h>
+#include <tools_share/firmware_image_package.h>
+
+#include <cmn_plat_def.h>
+#include <cmn_plat_util.h>
+#include <plat_brcm.h>
+#include <platform_def.h>
+
+/* IO devices */
+static const io_dev_connector_t *fip_dev_con;
+static uintptr_t fip_dev_handle;
+static const io_dev_connector_t *memmap_dev_con;
+static uintptr_t memmap_dev_handle;
+
+static const io_block_spec_t fip_block_spec = {
+	.offset = PLAT_BRCM_FIP_BASE,
+	.length = PLAT_BRCM_FIP_MAX_SIZE
+};
+
+static const io_block_spec_t qspi_fip_block_spec = {
+	.offset = PLAT_BRCM_FIP_QSPI_BASE,
+	.length = PLAT_BRCM_FIP_MAX_SIZE
+};
+
+static const io_block_spec_t nand_fip_block_spec = {
+	.offset = PLAT_BRCM_FIP_NAND_BASE,
+	.length = PLAT_BRCM_FIP_MAX_SIZE
+};
+
+static const io_uuid_spec_t bl2_uuid_spec = {
+	.uuid = UUID_TRUSTED_BOOT_FIRMWARE_BL2,
+};
+
+static const io_uuid_spec_t scp_bl2_uuid_spec = {
+	.uuid = UUID_SCP_FIRMWARE_SCP_BL2,
+};
+
+static const io_uuid_spec_t bl31_uuid_spec = {
+	.uuid = UUID_EL3_RUNTIME_FIRMWARE_BL31,
+};
+
+static const io_uuid_spec_t bl32_uuid_spec = {
+	.uuid = UUID_SECURE_PAYLOAD_BL32,
+};
+
+static const io_uuid_spec_t bl32_extra1_uuid_spec = {
+	.uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA1,
+};
+
+static const io_uuid_spec_t bl32_extra2_uuid_spec = {
+	.uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA2,
+};
+
+static const io_uuid_spec_t bl33_uuid_spec = {
+	.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
+};
+
+static const io_uuid_spec_t tb_fw_config_uuid_spec = {
+	.uuid = UUID_TB_FW_CONFIG,
+};
+
+static const io_uuid_spec_t hw_config_uuid_spec = {
+	.uuid = UUID_HW_CONFIG,
+};
+
+static const io_uuid_spec_t soc_fw_config_uuid_spec = {
+	.uuid = UUID_SOC_FW_CONFIG,
+};
+
+static const io_uuid_spec_t tos_fw_config_uuid_spec = {
+	.uuid = UUID_TOS_FW_CONFIG,
+};
+
+static const io_uuid_spec_t nt_fw_config_uuid_spec = {
+	.uuid = UUID_NT_FW_CONFIG,
+};
+
+#if TRUSTED_BOARD_BOOT
+static const io_uuid_spec_t tb_fw_cert_uuid_spec = {
+	.uuid = UUID_TRUSTED_BOOT_FW_CERT,
+};
+
+static const io_uuid_spec_t trusted_key_cert_uuid_spec = {
+	.uuid = UUID_TRUSTED_KEY_CERT,
+};
+
+static const io_uuid_spec_t scp_fw_key_cert_uuid_spec = {
+	.uuid = UUID_SCP_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t soc_fw_key_cert_uuid_spec = {
+	.uuid = UUID_SOC_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t tos_fw_key_cert_uuid_spec = {
+	.uuid = UUID_TRUSTED_OS_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t nt_fw_key_cert_uuid_spec = {
+	.uuid = UUID_NON_TRUSTED_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t scp_fw_cert_uuid_spec = {
+	.uuid = UUID_SCP_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t soc_fw_cert_uuid_spec = {
+	.uuid = UUID_SOC_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t tos_fw_cert_uuid_spec = {
+	.uuid = UUID_TRUSTED_OS_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t nt_fw_cert_uuid_spec = {
+	.uuid = UUID_NON_TRUSTED_FW_CONTENT_CERT,
+};
+#endif /* TRUSTED_BOARD_BOOT */
+
+static int open_fip(const uintptr_t spec);
+static int open_memmap(const uintptr_t spec);
+static int open_qspi(const uintptr_t spec);
+static int open_nand(const uintptr_t spec);
+
+struct plat_io_policy {
+	uintptr_t *dev_handle;
+	uintptr_t image_spec;
+	int (*check)(const uintptr_t spec);
+};
+
+/* By default, BRCM platforms load images from the FIP */
+static const struct plat_io_policy policies[] = {
+	[FIP_IMAGE_ID] = {
+		&memmap_dev_handle,
+		(uintptr_t)&fip_block_spec,
+		open_memmap
+	},
+	[BL2_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl2_uuid_spec,
+		open_fip
+	},
+	[SCP_BL2_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&scp_bl2_uuid_spec,
+		open_fip
+	},
+	[BL31_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl31_uuid_spec,
+		open_fip
+	},
+	[BL32_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl32_uuid_spec,
+		open_fip
+	},
+	[BL32_EXTRA1_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl32_extra1_uuid_spec,
+		open_fip
+	},
+	[BL32_EXTRA2_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl32_extra2_uuid_spec,
+		open_fip
+	},
+	[BL33_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl33_uuid_spec,
+		open_fip
+	},
+	[TB_FW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tb_fw_config_uuid_spec,
+		open_fip
+	},
+	[HW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&hw_config_uuid_spec,
+		open_fip
+	},
+	[SOC_FW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&soc_fw_config_uuid_spec,
+		open_fip
+	},
+	[TOS_FW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tos_fw_config_uuid_spec,
+		open_fip
+	},
+	[NT_FW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&nt_fw_config_uuid_spec,
+		open_fip
+	},
+#if TRUSTED_BOARD_BOOT
+	[TRUSTED_BOOT_FW_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tb_fw_cert_uuid_spec,
+		open_fip
+	},
+	[TRUSTED_KEY_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&trusted_key_cert_uuid_spec,
+		open_fip
+	},
+	[SCP_FW_KEY_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&scp_fw_key_cert_uuid_spec,
+		open_fip
+	},
+	[SOC_FW_KEY_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&soc_fw_key_cert_uuid_spec,
+		open_fip
+	},
+	[TRUSTED_OS_FW_KEY_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tos_fw_key_cert_uuid_spec,
+		open_fip
+	},
+	[NON_TRUSTED_FW_KEY_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&nt_fw_key_cert_uuid_spec,
+		open_fip
+	},
+	[SCP_FW_CONTENT_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&scp_fw_cert_uuid_spec,
+		open_fip
+	},
+	[SOC_FW_CONTENT_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&soc_fw_cert_uuid_spec,
+		open_fip
+	},
+	[TRUSTED_OS_FW_CONTENT_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tos_fw_cert_uuid_spec,
+		open_fip
+	},
+	[NON_TRUSTED_FW_CONTENT_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&nt_fw_cert_uuid_spec,
+		open_fip
+	},
+#endif /* TRUSTED_BOARD_BOOT */
+};
+
+/* By default, BRCM platforms load images from the FIP */
+static const struct plat_io_policy boot_source_policies[] = {
+	[BOOT_SOURCE_QSPI] = {
+		&memmap_dev_handle,
+		(uintptr_t)&qspi_fip_block_spec,
+		open_qspi
+	},
+	[BOOT_SOURCE_NAND] = {
+		&memmap_dev_handle,
+		(uintptr_t)&nand_fip_block_spec,
+		open_nand
+	},
+};
+
+/* Weak definitions may be overridden in specific brcm platform */
+#pragma weak plat_brcm_io_setup
+#pragma weak plat_brcm_process_flags
+
+static int open_fip(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	/* See if a Firmware Image Package is available */
+	result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID);
+	if (result == 0) {
+		result = io_open(fip_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using FIP\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+
+static int open_memmap(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	result = io_dev_init(memmap_dev_handle, (uintptr_t)NULL);
+	if (result == 0) {
+		result = io_open(memmap_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using Memmap\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+static int open_qspi(const uintptr_t spec)
+{
+	return open_memmap(spec);
+}
+
+static int open_nand(const uintptr_t spec)
+{
+	return open_memmap(spec);
+}
+
+
+void brcm_io_setup(void)
+{
+	int io_result;
+	uint32_t boot_source;
+
+	io_result = register_io_dev_fip(&fip_dev_con);
+	assert(io_result == 0);
+
+	io_result = register_io_dev_memmap(&memmap_dev_con);
+	assert(io_result == 0);
+
+	/* Open connections to devices and cache the handles */
+	io_result = io_dev_open(fip_dev_con, (uintptr_t)NULL,
+				&fip_dev_handle);
+	assert(io_result == 0);
+
+	boot_source = boot_source_get();
+	switch (boot_source) {
+	case BOOT_SOURCE_QSPI:
+	case BOOT_SOURCE_NAND:
+	default:
+		io_result = io_dev_open(memmap_dev_con, (uintptr_t)NULL,
+					&memmap_dev_handle);
+		break;
+	}
+	assert(io_result == 0);
+
+	/* Ignore improbable errors in release builds */
+	(void)io_result;
+}
+
+void plat_brcm_io_setup(void)
+{
+	brcm_io_setup();
+}
+
+void plat_brcm_process_flags(uint16_t plat_toc_flags __unused)
+{
+	WARN("%s not implemented\n", __func__);
+}
+
+/*
+ * Return an IO device handle and specification which can be used to access
+ * an image. Use this to enforce platform load policy
+ */
+int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
+			  uintptr_t *image_spec)
+{
+	int result;
+	const struct plat_io_policy *policy;
+	uint32_t boot_source;
+	uint16_t lcl_plat_toc_flg;
+
+	assert(image_id < ARRAY_SIZE(policies));
+
+	boot_source = boot_source_get();
+	if (image_id == FIP_IMAGE_ID)
+		policy = &boot_source_policies[boot_source];
+	else
+		policy = &policies[image_id];
+
+	result = policy->check(policy->image_spec);
+	if (result == 0) {
+		*image_spec = policy->image_spec;
+		*dev_handle = *(policy->dev_handle);
+
+		if (image_id == TRUSTED_BOOT_FW_CERT_ID) {
+			/*
+			 * Process the header flags to perform
+			 * such custom actions as speeding up PLL.
+			 * CERT seems to be the first image accessed
+			 * by BL1 so this is where we process the flags.
+			 */
+			fip_dev_get_plat_toc_flag((io_dev_info_t *)fip_dev_handle,
+						  &lcl_plat_toc_flg);
+			plat_brcm_process_flags(lcl_plat_toc_flg);
+		}
+	}
+
+	return result;
+}