diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.c b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
index f6d71a0..81488a15 100644
--- a/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
@@ -1540,6 +1540,88 @@
 }
 
 /**
+ * ti_sci_proc_shutdown() - Shutdown Processor without waiting for ACKs
+ *
+ * @proc_id:	Processor ID this request is for
+ * @dev_id:	Device identifier this request is for
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_shutdown(uint8_t proc_id, uint32_t dev_id)
+{
+	struct ti_sci_msg_req_wait_proc_boot_status wait_req;
+	struct ti_sci_msg_req_set_device_state set_req;
+	/*
+	 * We will not be waiting for this response, but declare one anyway
+	 * to pass to the setup function so the checks will still pass
+	 */
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	/* Start by sending wait command */
+
+	/* Setup with NORESPONSE flag to keep response queue clean */
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_WAIT_PROC_BOOT_STATUS,
+				    TI_SCI_FLAG_REQ_GENERIC_NORESPONSE,
+				    &wait_req, sizeof(wait_req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	wait_req.processor_id = proc_id;
+	/*
+	 * Wait maximum time to give us the best chance to get
+	 * to WFI before this command timeouts
+	 */
+	wait_req.delay_before_iterations_us = UINT8_MAX;
+	wait_req.num_wait_iterations = UINT8_MAX;
+	wait_req.delay_per_iteration_us = UINT8_MAX;  /* TODO: optimize time */
+	wait_req.num_match_iterations = 2;
+	wait_req.status_flags_1_set_all_wait = 0;
+	/* Wait for either WFE or WFI */
+	wait_req.status_flags_1_set_any_wait = PROC_BOOT_STATUS_FLAG_ARMV8_WFE |
+					       PROC_BOOT_STATUS_FLAG_ARMV8_WFI;
+	wait_req.status_flags_1_clr_all_wait = 0;
+	wait_req.status_flags_1_clr_any_wait = 0;
+
+	/* Send wait message */
+	ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, &xfer.tx_message);
+	if (ret) {
+		ERROR("Message sending failed (%d)\n", ret);
+		return ret;
+	}
+
+	/* Now queue up the shutdown request */
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_DEVICE_STATE,
+				    TI_SCI_FLAG_REQ_GENERIC_NORESPONSE,
+				    &set_req, sizeof(set_req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	set_req.id = dev_id;
+	set_req.state = MSG_DEVICE_SW_STATE_AUTO_OFF;
+
+	/* Send shutdown message */
+	ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, &xfer.tx_message);
+	if (ret) {
+		ERROR("Message sending failed (%d)\n", ret);
+		return ret;
+	}
+
+	/* Return without waiting for responses */
+	return 0;
+}
+
+/**
  * ti_sci_init() - Basic initialization
  *
  * Return: 0 if all goes well, else appropriate error message
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.h b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
index 91f8645..d07ee61 100644
--- a/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
@@ -206,6 +206,7 @@
 				 uint32_t status_flags_1_set_any_wait,
 				 uint32_t status_flags_1_clr_all_wait,
 				 uint32_t status_flags_1_clr_any_wait);
+int ti_sci_proc_shutdown(uint8_t proc_id, uint32_t dev_id);
 
 /**
  * ti_sci_init() - Basic initialization