diff --git a/drivers/arm/gic/v3/gicdv3_helpers.c b/drivers/arm/gic/v3/gicdv3_helpers.c
index 3f5ff45..987be69 100644
--- a/drivers/arm/gic/v3/gicdv3_helpers.c
+++ b/drivers/arm/gic/v3/gicdv3_helpers.c
@@ -9,50 +9,236 @@
 #include "gicv3_private.h"
 
 /*******************************************************************************
- * GIC Distributor interface accessors for bit operations
+ * GIC Distributor functions for accessing the GIC registers
+ * corresponding to a single interrupt ID. These functions use bitwise
+ * operations or appropriate register accesses to modify or return
+ * the bit-field corresponding the single interrupt ID.
  ******************************************************************************/
 
 /*
- * Accessor to read the GIC Distributor IGRPMODR corresponding to the
- * interrupt `id`, 32 interrupt IDs at a time.
+ * Accessors to set the bits corresponding to interrupt ID
+ * in GIC Distributor ICFGR and ICFGRE.
  */
-uint32_t gicd_read_igrpmodr(uintptr_t base, unsigned int id)
+void gicd_set_icfgr(uintptr_t base, unsigned int id, unsigned int cfg)
 {
-	return GICD_READ(IGRPMODR, base, id);
+	/* Interrupt configuration is a 2-bit field */
+	unsigned int bit_shift = BIT_NUM(ICFG, id) << 1U;
+
+	/* Clear the field, and insert required configuration */
+	mmio_clrsetbits_32(base + GICD_OFFSET(ICFG, id),
+				(uint32_t)GIC_CFG_MASK << bit_shift,
+				(cfg & GIC_CFG_MASK) << bit_shift);
 }
 
 /*
- * Accessor to write the GIC Distributor IGRPMODR corresponding to the
- * interrupt `id`, 32 interrupt IDs at a time.
+ * Accessors to get/set/clear the bit corresponding to interrupt ID
+ * in GIC Distributor IGROUPR and IGROUPRE.
  */
-void gicd_write_igrpmodr(uintptr_t base, unsigned int id, uint32_t val)
+unsigned int gicd_get_igroupr(uintptr_t base, unsigned int id)
 {
-	GICD_WRITE(IGRPMODR, base, id, val);
+	return GICD_GET_BIT(IGROUP, base, id);
+}
+
+void gicd_set_igroupr(uintptr_t base, unsigned int id)
+{
+	GICD_SET_BIT(IGROUP, base, id);
+}
+
+void gicd_clr_igroupr(uintptr_t base, unsigned int id)
+{
+	GICD_CLR_BIT(IGROUP, base, id);
 }
 
 /*
- * Accessor to get the bit corresponding to interrupt ID
- * in GIC Distributor IGRPMODR.
+ * Accessors to get/set/clear the bit corresponding to interrupt ID
+ * in GIC Distributor IGRPMODR and IGRPMODRE.
  */
 unsigned int gicd_get_igrpmodr(uintptr_t base, unsigned int id)
 {
-	return GICD_GET_BIT(IGRPMODR, base, id);
+	return GICD_GET_BIT(IGRPMOD, base, id);
 }
 
-/*
- * Accessor to set the bit corresponding to interrupt ID
- * in GIC Distributor IGRPMODR.
- */
 void gicd_set_igrpmodr(uintptr_t base, unsigned int id)
 {
-	GICD_SET_BIT(IGRPMODR, base, id);
+	GICD_SET_BIT(IGRPMOD, base, id);
+}
+
+void gicd_clr_igrpmodr(uintptr_t base, unsigned int id)
+{
+	GICD_CLR_BIT(IGRPMOD, base, id);
 }
 
 /*
- * Accessor to clear the bit corresponding to interrupt ID
- * in GIC Distributor IGRPMODR.
+ * Accessors to set the bit corresponding to interrupt ID
+ * in GIC Distributor ICENABLER and ICENABLERE.
  */
-void gicd_clr_igrpmodr(uintptr_t base, unsigned int id)
+void gicd_set_icenabler(uintptr_t base, unsigned int id)
 {
-	GICD_CLR_BIT(IGRPMODR, base, id);
+	GICD_WRITE_BIT(ICENABLE, base, id);
+}
+
+/*
+ * Accessors to set the bit corresponding to interrupt ID
+ * in GIC Distributor ICPENDR and ICPENDRE.
+ */
+void gicd_set_icpendr(uintptr_t base, unsigned int id)
+{
+	GICD_WRITE_BIT(ICPEND, base, id);
+}
+
+/*
+ * Accessors to get/set the bit corresponding to interrupt ID
+ * in GIC Distributor ISACTIVER and ISACTIVERE.
+ */
+unsigned int gicd_get_isactiver(uintptr_t base, unsigned int id)
+{
+	return GICD_GET_BIT(ISACTIVE, base, id);
+}
+
+void gicd_set_isactiver(uintptr_t base, unsigned int id)
+{
+	GICD_WRITE_BIT(ISACTIVE, base, id);
+}
+
+/*
+ * Accessors to set the bit corresponding to interrupt ID
+ * in GIC Distributor ISENABLER and ISENABLERE.
+ */
+void gicd_set_isenabler(uintptr_t base, unsigned int id)
+{
+	GICD_WRITE_BIT(ISENABLE, base, id);
+}
+
+/*
+ * Accessors to set the bit corresponding to interrupt ID
+ * in GIC Distributor ISPENDR and ISPENDRE.
+ */
+void gicd_set_ispendr(uintptr_t base, unsigned int id)
+{
+	GICD_WRITE_BIT(ISPEND, base, id);
+}
+
+/*
+ * Accessors to set the bit corresponding to interrupt ID
+ * in GIC Distributor IPRIORITYR and IPRIORITYRE.
+ */
+void gicd_set_ipriorityr(uintptr_t base, unsigned int id, unsigned int pri)
+{
+	GICD_WRITE_8(IPRIORITY, base, id, (uint8_t)(pri & GIC_PRI_MASK));
+}
+
+/*******************************************************************************
+ * GIC Distributor interface accessors for reading/writing entire registers
+ ******************************************************************************/
+
+/*
+ * Accessors to read/write the GIC Distributor ICGFR and ICGFRE
+ * corresponding to the interrupt ID, 16 interrupt IDs at a time.
+ */
+unsigned int gicd_read_icfgr(uintptr_t base, unsigned int id)
+{
+	return GICD_READ(ICFG, base, id);
+}
+
+void gicd_write_icfgr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	GICD_WRITE(ICFG, base, id, val);
+}
+
+/*
+ * Accessors to read/write the GIC Distributor IGROUPR and IGROUPRE
+ * corresponding to the interrupt ID, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_igroupr(uintptr_t base, unsigned int id)
+{
+	return GICD_READ(IGROUP, base, id);
+}
+
+void gicd_write_igroupr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	GICD_WRITE(IGROUP, base, id, val);
+}
+
+/*
+ * Accessors to read/write the GIC Distributor IGRPMODR and IGRPMODRE
+ * corresponding to the interrupt ID, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_igrpmodr(uintptr_t base, unsigned int id)
+{
+	return GICD_READ(IGRPMOD, base, id);
+}
+
+void gicd_write_igrpmodr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	GICD_WRITE(IGRPMOD, base, id, val);
+}
+
+/*
+ * Accessors to read/write the GIC Distributor IPRIORITYR and IPRIORITYRE
+ * corresponding to the interrupt ID, 4 interrupt IDs at a time.
+ */
+unsigned int gicd_read_ipriorityr(uintptr_t base, unsigned int id)
+{
+	return GICD_READ(IPRIORITY, base, id);
+}
+
+void gicd_write_ipriorityr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	GICD_WRITE(IPRIORITY, base, id, val);
+}
+
+/*
+ * Accessors to read/write the GIC Distributor ISACTIVER and ISACTIVERE
+ * corresponding to the interrupt ID, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_isactiver(uintptr_t base, unsigned int id)
+{
+	return GICD_READ(ISACTIVE, base, id);
+}
+
+void gicd_write_isactiver(uintptr_t base, unsigned int id, unsigned int val)
+{
+	GICD_WRITE(ISACTIVE, base, id, val);
+}
+
+/*
+ * Accessors to read/write the GIC Distributor ISENABLER and ISENABLERE
+ * corresponding to the interrupt ID, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_isenabler(uintptr_t base, unsigned int id)
+{
+	return GICD_READ(ISENABLE, base, id);
+}
+
+void gicd_write_isenabler(uintptr_t base, unsigned int id, unsigned int val)
+{
+	GICD_WRITE(ISENABLE, base, id, val);
+}
+
+/*
+ * Accessors to read/write the GIC Distributor ISPENDR and ISPENDRE
+ * corresponding to the interrupt ID, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_ispendr(uintptr_t base, unsigned int id)
+{
+	return GICD_READ(ISPEND, base, id);
+}
+
+void gicd_write_ispendr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	GICD_WRITE(ISPEND, base, id, val);
+}
+
+/*
+ * Accessors to read/write the GIC Distributor NSACR and NSACRE
+ * corresponding to the interrupt ID, 16 interrupt IDs at a time.
+ */
+unsigned int gicd_read_nsacr(uintptr_t base, unsigned int id)
+{
+	return GICD_READ(NSAC, base, id);
+}
+
+void gicd_write_nsacr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	GICD_WRITE(NSAC, base, id, val);
 }
diff --git a/drivers/arm/gic/v3/gicrv3_helpers.c b/drivers/arm/gic/v3/gicrv3_helpers.c
index 294acda..e46b15e 100644
--- a/drivers/arm/gic/v3/gicrv3_helpers.c
+++ b/drivers/arm/gic/v3/gicrv3_helpers.c
@@ -13,203 +13,113 @@
 
 /*******************************************************************************
  * GIC Redistributor functions
- * Note: The raw register values correspond to multiple interrupt IDs and
- * the number of interrupt IDs involved depends on the register accessed.
+ * Note: The raw register values correspond to multiple interrupt `id`s and
+ * the number of interrupt `id`s involved depends on the register accessed.
  ******************************************************************************/
 
 /*
- * Accessor to read the GIC Redistributor IPRIORITYR corresponding to the
- * interrupt `id`, 4 interrupts IDs at a time.
- */
-unsigned int gicr_read_ipriorityr(uintptr_t base, unsigned int id)
-{
-	unsigned int n = id >> IPRIORITYR_SHIFT;
-
-	return mmio_read_32(base + GICR_IPRIORITYR + (n << 2));
-}
-
-/*
- * Accessor to write the GIC Redistributor IPRIORITYR corresponding to the
- * interrupt `id`, 4 interrupts IDs at a time.
- */
-void gicr_write_ipriorityr(uintptr_t base, unsigned int id, unsigned int val)
-{
-	unsigned int n = id >> IPRIORITYR_SHIFT;
-
-	mmio_write_32(base + GICR_IPRIORITYR + (n << 2), val);
-}
-
-/*
- * Accessor to set the byte corresponding to interrupt ID
- * in GIC Redistributor IPRIORITYR.
+ * Accessor to set the byte corresponding to interrupt `id`
+ * in GIC Redistributor IPRIORITYR and IPRIORITYRE.
  */
 void gicr_set_ipriorityr(uintptr_t base, unsigned int id, unsigned int pri)
 {
-	GICR_WRITE_8(IPRIORITYR, base, id, pri & GIC_PRI_MASK);
+	GICR_WRITE_8(IPRIORITY, base, id, (uint8_t)(pri & GIC_PRI_MASK));
 }
 
 /*
- * Accessor to get the bit corresponding to interrupt ID
- * from GIC Redistributor IGROUPR0.
+ * Accessors to get/set/clear the bit corresponding to interrupt `id`
+ * from GIC Redistributor IGROUPR0 and IGROUPRE
  */
-unsigned int gicr_get_igroupr0(uintptr_t base, unsigned int id)
+unsigned int gicr_get_igroupr(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << IGROUPR_SHIFT) - 1U);
-	unsigned int reg_val = gicr_read_igroupr0(base);
-
-	return (reg_val >> bit_num) & 0x1U;
+	return GICR_GET_BIT(IGROUP, base, id);
 }
 
-/*
- * Accessor to set the bit corresponding to interrupt ID
- * in GIC Redistributor IGROUPR0.
- */
-void gicr_set_igroupr0(uintptr_t base, unsigned int id)
+void gicr_set_igroupr(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << IGROUPR_SHIFT) - 1U);
-	unsigned int reg_val = gicr_read_igroupr0(base);
-
-	gicr_write_igroupr0(base, reg_val | (1U << bit_num));
+	GICR_SET_BIT(IGROUP, base, id);
 }
 
-/*
- * Accessor to clear the bit corresponding to interrupt ID
- * in GIC Redistributor IGROUPR0.
- */
-void gicr_clr_igroupr0(uintptr_t base, unsigned int id)
+void gicr_clr_igroupr(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << IGROUPR_SHIFT) - 1U);
-	unsigned int reg_val = gicr_read_igroupr0(base);
-
-	gicr_write_igroupr0(base, reg_val & ~(1U << bit_num));
+	GICR_CLR_BIT(IGROUP, base, id);
 }
 
 /*
- * Accessor to get the bit corresponding to interrupt ID
- * from GIC Redistributor IGRPMODR0.
+ * Accessors to get/set/clear the bit corresponding to interrupt `id`
+ * from GIC Redistributor IGRPMODR0 and IGRPMODRE
  */
-unsigned int gicr_get_igrpmodr0(uintptr_t base, unsigned int id)
+unsigned int gicr_get_igrpmodr(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << IGRPMODR_SHIFT) - 1U);
-	unsigned int reg_val = gicr_read_igrpmodr0(base);
-
-	return (reg_val >> bit_num) & 0x1U;
+	return GICR_GET_BIT(IGRPMOD, base, id);
 }
 
-/*
- * Accessor to set the bit corresponding to interrupt ID
- * in GIC Redistributor IGRPMODR0.
- */
-void gicr_set_igrpmodr0(uintptr_t base, unsigned int id)
+void gicr_set_igrpmodr(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << IGRPMODR_SHIFT) - 1U);
-	unsigned int reg_val = gicr_read_igrpmodr0(base);
-
-	gicr_write_igrpmodr0(base, reg_val | (1U << bit_num));
+	GICR_SET_BIT(IGRPMOD, base, id);
 }
 
-/*
- * Accessor to clear the bit corresponding to interrupt ID
- * in GIC Redistributor IGRPMODR0.
- */
-void gicr_clr_igrpmodr0(uintptr_t base, unsigned int id)
+void gicr_clr_igrpmodr(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << IGRPMODR_SHIFT) - 1U);
-	unsigned int reg_val = gicr_read_igrpmodr0(base);
-
-	gicr_write_igrpmodr0(base, reg_val & ~(1U << bit_num));
+	GICR_CLR_BIT(IGRPMOD, base, id);
 }
 
 /*
- * Accessor to set the bit corresponding to interrupt ID
- * in GIC Redistributor ISENABLER0.
+ * Accessor to write the bit corresponding to interrupt `id`
+ * in GIC Redistributor ISENABLER0 and ISENABLERE
  */
-void gicr_set_isenabler0(uintptr_t base, unsigned int id)
+void gicr_set_isenabler(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << ISENABLER_SHIFT) - 1U);
-
-	gicr_write_isenabler0(base, (1U << bit_num));
+	GICR_WRITE_BIT(ISENABLE, base, id);
 }
 
 /*
- * Accessor to set the bit corresponding to interrupt ID in GIC Redistributor
- * ICENABLER0.
+ * Accessor to write the bit corresponding to interrupt `id`
+ * in GIC Redistributor ICENABLER0 and ICENABLERE
  */
-void gicr_set_icenabler0(uintptr_t base, unsigned int id)
+void gicr_set_icenabler(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << ICENABLER_SHIFT) - 1U);
-
-	gicr_write_icenabler0(base, (1U << bit_num));
+	GICR_WRITE_BIT(ICENABLE, base, id);
 }
 
 /*
- * Accessor to set the bit corresponding to interrupt ID in GIC Redistributor
- * ISACTIVER0.
+ * Accessor to get the bit corresponding to interrupt `id`
+ * in GIC Redistributor ISACTIVER0 and ISACTIVERE
  */
-unsigned int gicr_get_isactiver0(uintptr_t base, unsigned int id)
+unsigned int gicr_get_isactiver(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << ISACTIVER_SHIFT) - 1U);
-	unsigned int reg_val = gicr_read_isactiver0(base);
-
-	return (reg_val >> bit_num) & 0x1U;
+	return	GICR_GET_BIT(ISACTIVE, base, id);
 }
 
 /*
- * Accessor to clear the bit corresponding to interrupt ID in GIC Redistributor
- * ICPENDRR0.
+ * Accessor to clear the bit corresponding to interrupt `id`
+ * in GIC Redistributor ICPENDR0 and ICPENDRE
  */
-void gicr_set_icpendr0(uintptr_t base, unsigned int id)
+void gicr_set_icpendr(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << ICPENDR_SHIFT) - 1U);
-
-	gicr_write_icpendr0(base, (1U << bit_num));
+	GICR_WRITE_BIT(ICPEND, base, id);
 }
 
 /*
- * Accessor to set the bit corresponding to interrupt ID in GIC Redistributor
- * ISPENDR0.
+ * Accessor to write the bit corresponding to interrupt `id`
+ * in GIC Redistributor ISPENDR0 and ISPENDRE
  */
-void gicr_set_ispendr0(uintptr_t base, unsigned int id)
+void gicr_set_ispendr(uintptr_t base, unsigned int id)
 {
-	unsigned int bit_num = id & ((1U << ISPENDR_SHIFT) - 1U);
-
-	gicr_write_ispendr0(base, (1U << bit_num));
+	GICR_WRITE_BIT(ISPEND, base, id);
 }
 
 /*
- * Accessor to set the bit fields corresponding to interrupt ID
- * in GIC Redistributor ICFGR0.
+ * Accessor to set the bit fields corresponding to interrupt `id`
+ * in GIC Redistributor ICFGR0, ICFGR1 and ICFGRE
  */
-void gicr_set_icfgr0(uintptr_t base, unsigned int id, unsigned int cfg)
+void gicr_set_icfgr(uintptr_t base, unsigned int id, unsigned int cfg)
 {
 	/* Interrupt configuration is a 2-bit field */
-	unsigned int bit_num = id & ((1U << ICFGR_SHIFT) - 1U);
-	unsigned int bit_shift = bit_num << 1U;
-
-	uint32_t reg_val = gicr_read_icfgr0(base);
+	unsigned int bit_shift = BIT_NUM(ICFG, id) << 1U;
 
 	/* Clear the field, and insert required configuration */
-	reg_val &= ~(GIC_CFG_MASK << bit_shift);
-	reg_val |= ((cfg & GIC_CFG_MASK) << bit_shift);
-
-	gicr_write_icfgr0(base, reg_val);
-}
-
-/*
- * Accessor to set the bit fields corresponding to interrupt ID
- * in GIC Redistributor ICFGR1.
- */
-void gicr_set_icfgr1(uintptr_t base, unsigned int id, unsigned int cfg)
-{
-	/* Interrupt configuration is a 2-bit field */
-	unsigned int bit_num = id & ((1U << ICFGR_SHIFT) - 1U);
-	unsigned int bit_shift = bit_num << 1U;
-
-	uint32_t reg_val = gicr_read_icfgr1(base);
-
-	/* Clear the field, and insert required configuration */
-	reg_val &= ~(GIC_CFG_MASK << bit_shift);
-	reg_val |= ((cfg & GIC_CFG_MASK) << bit_shift);
-
-	gicr_write_icfgr1(base, reg_val);
+	mmio_clrsetbits_32(base + GICR_OFFSET(ICFG, id),
+				(uint32_t)GIC_CFG_MASK << bit_shift,
+				(cfg & GIC_CFG_MASK) << bit_shift);
 }
diff --git a/drivers/arm/gic/v3/gicv3.mk b/drivers/arm/gic/v3/gicv3.mk
index 164f88e..73339d9 100644
--- a/drivers/arm/gic/v3/gicv3.mk
+++ b/drivers/arm/gic/v3/gicv3.mk
@@ -8,9 +8,9 @@
 GICV3_IMPL			?=	GIC500
 GICV3_IMPL_GIC600_MULTICHIP	?=	0
 GICV3_OVERRIDE_DISTIF_PWR_OPS	?=	0
+GIC_EXT_INTID			?=	0
 
-GICV3_SOURCES	+=	drivers/arm/gic/common/gic_common.c	\
-			drivers/arm/gic/v3/gicv3_main.c		\
+GICV3_SOURCES	+=	drivers/arm/gic/v3/gicv3_main.c		\
 			drivers/arm/gic/v3/gicv3_helpers.c	\
 			drivers/arm/gic/v3/gicdv3_helpers.c	\
 			drivers/arm/gic/v3/gicrv3_helpers.c
@@ -32,3 +32,7 @@
 else
 $(error "Incorrect GICV3_IMPL value ${GICV3_IMPL}")
 endif
+
+# Set support for extended PPI and SPI range
+$(eval $(call assert_boolean,GIC_EXT_INTID))
+$(eval $(call add_define,GIC_EXT_INTID))
diff --git a/drivers/arm/gic/v3/gicv3_helpers.c b/drivers/arm/gic/v3/gicv3_helpers.c
index d5aaf96..09fa678 100644
--- a/drivers/arm/gic/v3/gicv3_helpers.c
+++ b/drivers/arm/gic/v3/gicv3_helpers.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -31,8 +31,8 @@
 	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) & ~WAKER_PS_BIT);
 
 	/* Wait till the WAKER_CA_BIT changes to 0 */
-	while ((gicr_read_waker(gicr_base) & WAKER_CA_BIT) != 0U)
-		;
+	while ((gicr_read_waker(gicr_base) & WAKER_CA_BIT) != 0U) {
+	}
 }
 
 /******************************************************************************
@@ -45,11 +45,10 @@
 	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) | WAKER_PS_BIT);
 
 	/* Wait till the WAKER_CA_BIT changes to 1 */
-	while ((gicr_read_waker(gicr_base) & WAKER_CA_BIT) == 0U)
-		;
+	while ((gicr_read_waker(gicr_base) & WAKER_CA_BIT) == 0U) {
+	}
 }
 
-
 /*******************************************************************************
  * This function probes the Redistributor frames when the driver is initialised
  * and saves their base addresses. These base addresses are used later to
@@ -84,47 +83,78 @@
 				TYPER_PROC_NUM_MASK;
 		}
 
-		if (proc_num < rdistif_num)
+		if (proc_num < rdistif_num) {
 			rdistif_base_addrs[proc_num] = rdistif_base;
+		}
 
 		rdistif_base += (1U << GICR_PCPUBASE_SHIFT);
 	} while ((typer_val & TYPER_LAST_BIT) == 0U);
 }
 
 /*******************************************************************************
- * Helper function to configure the default attributes of SPIs.
+ * Helper function to configure the default attributes of (E)SPIs.
  ******************************************************************************/
 void gicv3_spis_config_defaults(uintptr_t gicd_base)
 {
-	unsigned int index, num_ints;
+	unsigned int i, num_ints;
+#if GIC_EXT_INTID
+	unsigned int num_eints;
+#endif
+	unsigned int typer_reg = gicd_read_typer(gicd_base);
 
-	num_ints = gicd_read_typer(gicd_base);
-	num_ints &= TYPER_IT_LINES_NO_MASK;
-	num_ints = (num_ints + 1U) << 5;
+	/* Maximum SPI INTID is 32 * (GICD_TYPER.ITLinesNumber + 1) - 1 */
+	num_ints = ((typer_reg & TYPER_IT_LINES_NO_MASK) + 1U) << 5;
 
+	/* Treat all (E)SPIs as G1NS by default. We do 32 at a time. */
+	for (i = MIN_SPI_ID; i < num_ints; i += (1U << IGROUPR_SHIFT)) {
+		gicd_write_igroupr(gicd_base, i, ~0U);
+	}
+
+#if GIC_EXT_INTID
+	/* Check if extended SPI range is implemented */
+	if ((typer_reg & TYPER_ESPI) != 0U) {
+		/*
+		 * Maximum ESPI INTID is 32 * (GICD_TYPER.ESPI_range + 1) + 4095
+		 */
+		num_eints = ((((typer_reg >> TYPER_ESPI_RANGE_SHIFT) &
+			TYPER_ESPI_RANGE_MASK) + 1U) << 5) + MIN_ESPI_ID - 1;
+
+		for (i = MIN_ESPI_ID; i < num_eints;
+					i += (1U << IGROUPR_SHIFT)) {
+			gicd_write_igroupr(gicd_base, i, ~0U);
+		}
+	} else {
+		num_eints = 0U;
+	}
+#endif
+
+	/* Setup the default (E)SPI priorities doing four at a time */
+	for (i = MIN_SPI_ID; i < num_ints; i += (1U << IPRIORITYR_SHIFT)) {
+		gicd_write_ipriorityr(gicd_base, i, GICD_IPRIORITYR_DEF_VAL);
+	}
+
+#if GIC_EXT_INTID
+	for (i = MIN_ESPI_ID; i < num_eints;
+					i += (1U << IPRIORITYR_SHIFT)) {
+		gicd_write_ipriorityr(gicd_base, i, GICD_IPRIORITYR_DEF_VAL);
+	}
+#endif
 	/*
-	 * Treat all SPIs as G1NS by default. The number of interrupts is
-	 * calculated as 32 * (IT_LINES + 1). We do 32 at a time.
+	 * Treat all (E)SPIs as level triggered by default, write 16 at a time
 	 */
-	for (index = MIN_SPI_ID; index < num_ints; index += 32U)
-		gicd_write_igroupr(gicd_base, index, ~0U);
+	for (i = MIN_SPI_ID; i < num_ints; i += (1U << ICFGR_SHIFT)) {
+		gicd_write_icfgr(gicd_base, i, 0U);
+	}
 
-	/* Setup the default SPI priorities doing four at a time */
-	for (index = MIN_SPI_ID; index < num_ints; index += 4U)
-		gicd_write_ipriorityr(gicd_base,
-				      index,
-				      GICD_IPRIORITYR_DEF_VAL);
-
-	/*
-	 * Treat all SPIs as level triggered by default, write 16 at
-	 * a time
-	 */
-	for (index = MIN_SPI_ID; index < num_ints; index += 16U)
-		gicd_write_icfgr(gicd_base, index, 0U);
+#if GIC_EXT_INTID
+	for (i = MIN_ESPI_ID; i < num_eints; i += (1U << ICFGR_SHIFT)) {
+		gicd_write_icfgr(gicd_base, i, 0U);
+	}
+#endif
 }
 
 /*******************************************************************************
- * Helper function to configure properties of secure SPIs
+ * Helper function to configure properties of secure (E)SPIs
  ******************************************************************************/
 unsigned int gicv3_secure_spis_config_props(uintptr_t gicd_base,
 		const interrupt_prop_t *interrupt_props,
@@ -136,80 +166,108 @@
 	unsigned int ctlr_enable = 0U;
 
 	/* Make sure there's a valid property array */
-	if (interrupt_props_num > 0U)
+	if (interrupt_props_num > 0U) {
 		assert(interrupt_props != NULL);
+	}
 
 	for (i = 0U; i < interrupt_props_num; i++) {
 		current_prop = &interrupt_props[i];
 
-		if (current_prop->intr_num < MIN_SPI_ID)
+		unsigned int intr_num = current_prop->intr_num;
+
+		/* Skip SGI, (E)PPI and LPI interrupts */
+		if (!IS_SPI(intr_num)) {
 			continue;
+		}
 
 		/* Configure this interrupt as a secure interrupt */
-		gicd_clr_igroupr(gicd_base, current_prop->intr_num);
+		gicd_clr_igroupr(gicd_base, intr_num);
 
 		/* Configure this interrupt as G0 or a G1S interrupt */
 		assert((current_prop->intr_grp == INTR_GROUP0) ||
 				(current_prop->intr_grp == INTR_GROUP1S));
+
 		if (current_prop->intr_grp == INTR_GROUP1S) {
-			gicd_set_igrpmodr(gicd_base, current_prop->intr_num);
+			gicd_set_igrpmodr(gicd_base, intr_num);
 			ctlr_enable |= CTLR_ENABLE_G1S_BIT;
 		} else {
-			gicd_clr_igrpmodr(gicd_base, current_prop->intr_num);
+			gicd_clr_igrpmodr(gicd_base, intr_num);
 			ctlr_enable |= CTLR_ENABLE_G0_BIT;
 		}
 
 		/* Set interrupt configuration */
-		gicd_set_icfgr(gicd_base, current_prop->intr_num,
-				current_prop->intr_cfg);
+		gicd_set_icfgr(gicd_base, intr_num, current_prop->intr_cfg);
 
 		/* Set the priority of this interrupt */
-		gicd_set_ipriorityr(gicd_base, current_prop->intr_num,
-				current_prop->intr_pri);
+		gicd_set_ipriorityr(gicd_base, intr_num,
+					current_prop->intr_pri);
 
-		/* Target SPIs to the primary CPU */
+		/* Target (E)SPIs to the primary CPU */
 		gic_affinity_val =
 			gicd_irouter_val_from_mpidr(read_mpidr(), 0U);
-		gicd_write_irouter(gicd_base, current_prop->intr_num,
-				gic_affinity_val);
+		gicd_write_irouter(gicd_base, intr_num,
+					gic_affinity_val);
 
 		/* Enable this interrupt */
-		gicd_set_isenabler(gicd_base, current_prop->intr_num);
+		gicd_set_isenabler(gicd_base, intr_num);
 	}
 
 	return ctlr_enable;
 }
 
 /*******************************************************************************
- * Helper function to configure the default attributes of SPIs.
+ * Helper function to configure the default attributes of (E)SPIs
  ******************************************************************************/
 void gicv3_ppi_sgi_config_defaults(uintptr_t gicr_base)
 {
-	unsigned int index;
+	unsigned int i, ppi_regs_num, regs_num;
 
+#if GIC_EXT_INTID
+	/* Calculate number of PPI registers */
+	ppi_regs_num = (unsigned int)((gicr_read_typer(gicr_base) >>
+			TYPER_PPI_NUM_SHIFT) & TYPER_PPI_NUM_MASK) + 1;
+	/* All other values except PPInum [0-2] are reserved */
+	if (ppi_regs_num > 3U) {
+		ppi_regs_num = 1U;
+	}
+#else
+	ppi_regs_num = 1U;
+#endif
 	/*
-	 * Disable all SGIs (imp. def.)/PPIs before configuring them. This is a
-	 * more scalable approach as it avoids clearing the enable bits in the
-	 * GICD_CTLR
+	 * Disable all SGIs (imp. def.)/(E)PPIs before configuring them.
+	 * This is a more scalable approach as it avoids clearing
+	 * the enable bits in the GICD_CTLR.
 	 */
-	gicr_write_icenabler0(gicr_base, ~0U);
+	for (i = 0U; i < ppi_regs_num; ++i) {
+		gicr_write_icenabler(gicr_base, i, ~0U);
+	}
+
+	/* Wait for pending writes to GICR_ICENABLER */
 	gicr_wait_for_pending_write(gicr_base);
 
-	/* Treat all SGIs/PPIs as G1NS by default. */
-	gicr_write_igroupr0(gicr_base, ~0U);
+	/* 32 interrupt IDs per GICR_IGROUPR register */
+	for (i = 0U; i < ppi_regs_num; ++i) {
+		/* Treat all SGIs/(E)PPIs as G1NS by default */
+		gicr_write_igroupr(gicr_base, i, ~0U);
+	}
 
-	/* Setup the default PPI/SGI priorities doing four at a time */
-	for (index = 0U; index < MIN_SPI_ID; index += 4U)
-		gicr_write_ipriorityr(gicr_base,
-				      index,
-				      GICD_IPRIORITYR_DEF_VAL);
+	/* 4 interrupt IDs per GICR_IPRIORITYR register */
+	regs_num = ppi_regs_num << 3;
+	for (i = 0U; i < regs_num; ++i) {
+		/* Setup the default (E)PPI/SGI priorities doing 4 at a time */
+		gicr_write_ipriorityr(gicr_base, i, GICD_IPRIORITYR_DEF_VAL);
+	}
 
-	/* Configure all PPIs as level triggered by default */
-	gicr_write_icfgr1(gicr_base, 0U);
+	/* 16 interrupt IDs per GICR_ICFGR register */
+	regs_num = ppi_regs_num << 1;
+	for (i = (MIN_PPI_ID >> ICFGR_SHIFT); i < regs_num; ++i) {
+		/* Configure all (E)PPIs as level triggered by default */
+		gicr_write_icfgr(gicr_base, i, 0U);
+	}
 }
 
 /*******************************************************************************
- * Helper function to configure properties of secure G0 and G1S PPIs and SGIs.
+ * Helper function to configure properties of secure G0 and G1S (E)PPIs and SGIs
  ******************************************************************************/
 unsigned int gicv3_secure_ppi_sgi_config_props(uintptr_t gicr_base,
 		const interrupt_prop_t *interrupt_props,
@@ -220,45 +278,50 @@
 	unsigned int ctlr_enable = 0U;
 
 	/* Make sure there's a valid property array */
-	if (interrupt_props_num > 0U)
+	if (interrupt_props_num > 0U) {
 		assert(interrupt_props != NULL);
+	}
 
 	for (i = 0U; i < interrupt_props_num; i++) {
 		current_prop = &interrupt_props[i];
 
-		if (current_prop->intr_num >= MIN_SPI_ID)
+		unsigned int intr_num = current_prop->intr_num;
+
+		/* Skip (E)SPI interrupt */
+		if (!IS_SGI_PPI(intr_num)) {
 			continue;
+		}
 
 		/* Configure this interrupt as a secure interrupt */
-		gicr_clr_igroupr0(gicr_base, current_prop->intr_num);
+		gicr_clr_igroupr(gicr_base, intr_num);
 
 		/* Configure this interrupt as G0 or a G1S interrupt */
 		assert((current_prop->intr_grp == INTR_GROUP0) ||
-				(current_prop->intr_grp == INTR_GROUP1S));
+			(current_prop->intr_grp == INTR_GROUP1S));
+
 		if (current_prop->intr_grp == INTR_GROUP1S) {
-			gicr_set_igrpmodr0(gicr_base, current_prop->intr_num);
+			gicr_set_igrpmodr(gicr_base, intr_num);
 			ctlr_enable |= CTLR_ENABLE_G1S_BIT;
 		} else {
-			gicr_clr_igrpmodr0(gicr_base, current_prop->intr_num);
+			gicr_clr_igrpmodr(gicr_base, intr_num);
 			ctlr_enable |= CTLR_ENABLE_G0_BIT;
 		}
 
 		/* Set the priority of this interrupt */
-		gicr_set_ipriorityr(gicr_base, current_prop->intr_num,
-				current_prop->intr_pri);
+		gicr_set_ipriorityr(gicr_base, intr_num,
+					current_prop->intr_pri);
 
 		/*
-		 * Set interrupt configuration for PPIs. Configuration for SGIs
-		 * are ignored.
+		 * Set interrupt configuration for (E)PPIs.
+		 * Configurations for SGIs 0-15 are ignored.
 		 */
-		if ((current_prop->intr_num >= MIN_PPI_ID) &&
-				(current_prop->intr_num < MIN_SPI_ID)) {
-			gicr_set_icfgr1(gicr_base, current_prop->intr_num,
+		if (intr_num >= MIN_PPI_ID) {
+			gicr_set_icfgr(gicr_base, intr_num,
 					current_prop->intr_cfg);
 		}
 
 		/* Enable this interrupt */
-		gicr_set_isenabler0(gicr_base, current_prop->intr_num);
+		gicr_set_isenabler(gicr_base, intr_num);
 	}
 
 	return ctlr_enable;
diff --git a/drivers/arm/gic/v3/gicv3_main.c b/drivers/arm/gic/v3/gicv3_main.c
index a672b18..aefaa35 100644
--- a/drivers/arm/gic/v3/gicv3_main.c
+++ b/drivers/arm/gic/v3/gicv3_main.c
@@ -31,26 +31,62 @@
 #pragma weak gicv3_rdistif_off
 #pragma weak gicv3_rdistif_on
 
+/* Check interrupt ID for SGI/(E)PPI and (E)SPIs */
+static bool is_sgi_ppi(unsigned int id);
+
+/*
+ * Helper macros to save and restore GICR and GICD registers
+ * corresponding to their numbers to and from the context
+ */
+#define RESTORE_GICR_REG(base, ctx, name, i)	\
+	gicr_write_##name((base), (i), (ctx)->gicr_##name[(i)])
+
+#define SAVE_GICR_REG(base, ctx, name, i)	\
+	(ctx)->gicr_##name[(i)] = gicr_read_##name((base), (i))
 
 /* Helper macros to save and restore GICD registers to and from the context */
 #define RESTORE_GICD_REGS(base, ctx, intr_num, reg, REG)		\
 	do {								\
-		for (unsigned int int_id = MIN_SPI_ID; int_id < (intr_num); \
-				int_id += (1U << REG##_SHIFT)) {	\
-			gicd_write_##reg(base, int_id,			\
-				ctx->gicd_##reg[(int_id - MIN_SPI_ID) >> REG##_SHIFT]); \
+		for (unsigned int int_id = MIN_SPI_ID; int_id < (intr_num);\
+				int_id += (1U << REG##R_SHIFT)) {	\
+			gicd_write_##reg((base), int_id,		\
+				(ctx)->gicd_##reg[(int_id - MIN_SPI_ID) >> \
+							REG##R_SHIFT]);	\
 		}							\
 	} while (false)
 
 #define SAVE_GICD_REGS(base, ctx, intr_num, reg, REG)			\
 	do {								\
-		for (unsigned int int_id = MIN_SPI_ID; int_id < (intr_num); \
-				int_id += (1U << REG##_SHIFT)) {	\
-			ctx->gicd_##reg[(int_id - MIN_SPI_ID) >> REG##_SHIFT] =\
-					gicd_read_##reg(base, int_id);	\
+		for (unsigned int int_id = MIN_SPI_ID; int_id < (intr_num);\
+				int_id += (1U << REG##R_SHIFT)) {	\
+			(ctx)->gicd_##reg[(int_id - MIN_SPI_ID) >>	\
+			REG##R_SHIFT] = gicd_read_##reg((base), int_id); \
 		}							\
 	} while (false)
 
+#if GIC_EXT_INTID
+#define RESTORE_GICD_EREGS(base, ctx, intr_num, reg, REG)		\
+	do {								\
+		for (unsigned int int_id = MIN_ESPI_ID; int_id < (intr_num);\
+				int_id += (1U << REG##R_SHIFT)) {	\
+			gicd_write_##reg((base), int_id,		\
+			(ctx)->gicd_##reg[(int_id - (MIN_ESPI_ID - MIN_SPI_ID))\
+						>> REG##R_SHIFT]);	\
+		}							\
+	} while (false)
+
+#define SAVE_GICD_EREGS(base, ctx, intr_num, reg, REG)			\
+	do {								\
+		for (unsigned int int_id = MIN_ESPI_ID; int_id < (intr_num);\
+				int_id += (1U << REG##R_SHIFT)) {	\
+			(ctx)->gicd_##reg[(int_id - (MIN_ESPI_ID - MIN_SPI_ID))\
+			>> REG##R_SHIFT] = gicd_read_##reg((base), int_id);\
+		}							\
+	} while (false)
+#else
+#define SAVE_GICD_EREGS(base, ctx, intr_num, reg, REG)
+#define RESTORE_GICD_EREGS(base, ctx, intr_num, reg, REG)
+#endif /* GIC_EXT_INTID */
 
 /*******************************************************************************
  * This function initialises the ARM GICv3 driver in EL3 with provided platform
@@ -80,7 +116,7 @@
 			(ID_AA64PFR0_GIC_MASK << ID_AA64PFR0_GIC_SHIFT)) != 0U);
 #endif /* !__aarch64__ */
 
-	/* The GIC version should be 3.0 */
+	/* The GIC version should be 3 */
 	gic_version = gicd_read_pidr2(plat_driver_data->gicd_base);
 	gic_version >>= PIDR2_ARCH_REV_SHIFT;
 	gic_version &= PIDR2_ARCH_REV_MASK;
@@ -133,7 +169,6 @@
 	INFO("GICv3 with%s legacy support detected."
 			" ARM GICv3 driver initialized in EL3\n",
 			(gicv2_compat == 0U) ? "" : "out");
-
 }
 
 /*******************************************************************************
@@ -142,7 +177,7 @@
  ******************************************************************************/
 void __init gicv3_distif_init(void)
 {
-	unsigned int bitmap = 0;
+	unsigned int bitmap;
 
 	assert(gicv3_driver_data != NULL);
 	assert(gicv3_driver_data->gicd_base != 0U);
@@ -164,7 +199,7 @@
 	gicd_set_ctlr(gicv3_driver_data->gicd_base,
 			CTLR_ARE_S_BIT | CTLR_ARE_NS_BIT, RWP_TRUE);
 
-	/* Set the default attribute of all SPIs */
+	/* Set the default attribute of all (E)SPIs */
 	gicv3_spis_config_defaults(gicv3_driver_data->gicd_base);
 
 	bitmap = gicv3_secure_spis_config_props(
@@ -172,7 +207,7 @@
 			gicv3_driver_data->interrupt_props,
 			gicv3_driver_data->interrupt_props_num);
 
-	/* Enable the secure SPIs now that they have been configured */
+	/* Enable the secure (E)SPIs now that they have been configured */
 	gicd_set_ctlr(gicv3_driver_data->gicd_base, bitmap, RWP_TRUE);
 }
 
@@ -184,7 +219,7 @@
 void gicv3_rdistif_init(unsigned int proc_num)
 {
 	uintptr_t gicr_base;
-	unsigned int bitmap = 0U;
+	unsigned int bitmap;
 	uint32_t ctlr;
 
 	assert(gicv3_driver_data != NULL);
@@ -203,7 +238,7 @@
 	gicr_base = gicv3_driver_data->rdistif_base_addrs[proc_num];
 	assert(gicr_base != 0U);
 
-	/* Set the default attribute of all SGIs and PPIs */
+	/* Set the default attribute of all SGIs and (E)PPIs */
 	gicv3_ppi_sgi_config_defaults(gicr_base);
 
 	bitmap = gicv3_secure_ppi_sgi_config_props(gicr_base,
@@ -211,8 +246,9 @@
 			gicv3_driver_data->interrupt_props_num);
 
 	/* Enable interrupt groups as required, if not already */
-	if ((ctlr & bitmap) != bitmap)
+	if ((ctlr & bitmap) != bitmap) {
 		gicd_set_ctlr(gicv3_driver_data->gicd_base, bitmap, RWP_TRUE);
+	}
 }
 
 /*******************************************************************************
@@ -220,12 +256,10 @@
  ******************************************************************************/
 void gicv3_rdistif_off(unsigned int proc_num)
 {
-	return;
 }
 
 void gicv3_rdistif_on(unsigned int proc_num)
 {
-	return;
 }
 
 /*******************************************************************************
@@ -342,8 +376,9 @@
 	 * If the ID is special identifier corresponding to G1S or G1NS
 	 * interrupt, then read the highest pending group 1 interrupt.
 	 */
-	if ((id == PENDING_G1S_INTID) || (id == PENDING_G1NS_INTID))
+	if ((id == PENDING_G1S_INTID) || (id == PENDING_G1NS_INTID)) {
 		return (uint32_t)read_icc_hppir1_el1() & HPPIR1_EL1_INTID_MASK;
+	}
 
 	return id;
 }
@@ -373,8 +408,7 @@
  *    INTR_GROUP1NS: The interrupt type is a Secure Group 1 non secure
  *                   interrupt.
  ******************************************************************************/
-unsigned int gicv3_get_interrupt_type(unsigned int id,
-					  unsigned int proc_num)
+unsigned int gicv3_get_interrupt_type(unsigned int id, unsigned int proc_num)
 {
 	unsigned int igroup, grpmodr;
 	uintptr_t gicr_base;
@@ -387,15 +421,19 @@
 	assert(proc_num < gicv3_driver_data->rdistif_num);
 
 	/* All LPI interrupts are Group 1 non secure */
-	if (id >= MIN_LPI_ID)
+	if (id >= MIN_LPI_ID) {
 		return INTR_GROUP1NS;
+	}
 
-	if (id < MIN_SPI_ID) {
+	/* Check interrupt ID */
+	if (is_sgi_ppi(id)) {
+		/* SGIs: 0-15, PPIs: 16-31, EPPIs: 1056-1119 */
 		assert(gicv3_driver_data->rdistif_base_addrs != NULL);
 		gicr_base = gicv3_driver_data->rdistif_base_addrs[proc_num];
-		igroup = gicr_get_igroupr0(gicr_base, id);
-		grpmodr = gicr_get_igrpmodr0(gicr_base, id);
+		igroup = gicr_get_igroupr(gicr_base, id);
+		grpmodr = gicr_get_igrpmodr(gicr_base, id);
 	} else {
+		/* SPIs: 32-1019, ESPIs: 4096-5119 */
 		assert(gicv3_driver_data->gicd_base != 0U);
 		igroup = gicd_get_igroupr(gicv3_driver_data->gicd_base, id);
 		grpmodr = gicd_get_igrpmodr(gicv3_driver_data->gicd_base, id);
@@ -405,12 +443,14 @@
 	 * If the IGROUP bit is set, then it is a Group 1 Non secure
 	 * interrupt
 	 */
-	if (igroup != 0U)
+	if (igroup != 0U) {
 		return INTR_GROUP1NS;
+	}
 
 	/* If the GRPMOD bit is set, then it is a Group 1 Secure interrupt */
-	if (grpmodr != 0U)
+	if (grpmodr != 0U) {
 		return INTR_GROUP1S;
+	}
 
 	/* Else it is a Group 0 Secure interrupt */
 	return INTR_GROUP0;
@@ -427,7 +467,8 @@
  *
  * This function must be invoked after the GIC CPU interface is disabled.
  *****************************************************************************/
-void gicv3_its_save_disable(uintptr_t gits_base, gicv3_its_ctx_t * const its_ctx)
+void gicv3_its_save_disable(uintptr_t gits_base,
+				gicv3_its_ctx_t * const its_ctx)
 {
 	unsigned int i;
 
@@ -439,8 +480,7 @@
 	its_ctx->gits_ctlr = gits_read_ctlr(gits_base);
 
 	/* Disable the ITS */
-	gits_write_ctlr(gits_base, its_ctx->gits_ctlr &
-					(~GITS_CTLR_ENABLED_BIT));
+	gits_write_ctlr(gits_base, its_ctx->gits_ctlr & ~GITS_CTLR_ENABLED_BIT);
 
 	/* Wait for quiescent state */
 	gits_wait_for_quiescent_bit(gits_base);
@@ -448,8 +488,9 @@
 	its_ctx->gits_cbaser = gits_read_cbaser(gits_base);
 	its_ctx->gits_cwriter = gits_read_cwriter(gits_base);
 
-	for (i = 0; i < ARRAY_SIZE(its_ctx->gits_baser); i++)
+	for (i = 0U; i < ARRAY_SIZE(its_ctx->gits_baser); i++) {
 		its_ctx->gits_baser[i] = gits_read_baser(gits_base, i);
+	}
 }
 
 /*****************************************************************************
@@ -460,7 +501,8 @@
  *
  * This must be invoked before the GIC CPU interface is enabled.
  *****************************************************************************/
-void gicv3_its_restore(uintptr_t gits_base, const gicv3_its_ctx_t * const its_ctx)
+void gicv3_its_restore(uintptr_t gits_base,
+			const gicv3_its_ctx_t * const its_ctx)
 {
 	unsigned int i;
 
@@ -476,22 +518,23 @@
 	gits_write_cbaser(gits_base, its_ctx->gits_cbaser);
 	gits_write_cwriter(gits_base, its_ctx->gits_cwriter);
 
-	for (i = 0; i < ARRAY_SIZE(its_ctx->gits_baser); i++)
+	for (i = 0U; i < ARRAY_SIZE(its_ctx->gits_baser); i++) {
 		gits_write_baser(gits_base, i, its_ctx->gits_baser[i]);
+	}
 
 	/* Restore the ITS CTLR but leave the ITS disabled */
-	gits_write_ctlr(gits_base, its_ctx->gits_ctlr &
-			(~GITS_CTLR_ENABLED_BIT));
+	gits_write_ctlr(gits_base, its_ctx->gits_ctlr & ~GITS_CTLR_ENABLED_BIT);
 }
 
 /*****************************************************************************
  * Function to save the GIC Redistributor register context. This function
  * must be invoked after CPU interface disable and prior to Distributor save.
  *****************************************************************************/
-void gicv3_rdistif_save(unsigned int proc_num, gicv3_redist_ctx_t * const rdist_ctx)
+void gicv3_rdistif_save(unsigned int proc_num,
+			gicv3_redist_ctx_t * const rdist_ctx)
 {
 	uintptr_t gicr_base;
-	unsigned int int_id;
+	unsigned int i, ppi_regs_num, regs_num;
 
 	assert(gicv3_driver_data != NULL);
 	assert(proc_num < gicv3_driver_data->rdistif_num);
@@ -501,6 +544,17 @@
 
 	gicr_base = gicv3_driver_data->rdistif_base_addrs[proc_num];
 
+#if GIC_EXT_INTID
+	/* Calculate number of PPI registers */
+	ppi_regs_num = (unsigned int)((gicr_read_typer(gicr_base) >>
+			TYPER_PPI_NUM_SHIFT) & TYPER_PPI_NUM_MASK) + 1;
+	/* All other values except PPInum [0-2] are reserved */
+	if (ppi_regs_num > 3U) {
+		ppi_regs_num = 1U;
+	}
+#else
+	ppi_regs_num = 1U;
+#endif
 	/*
 	 * Wait for any write to GICR_CTLR to complete before trying to save any
 	 * state.
@@ -512,20 +566,28 @@
 	rdist_ctx->gicr_propbaser = gicr_read_propbaser(gicr_base);
 	rdist_ctx->gicr_pendbaser = gicr_read_pendbaser(gicr_base);
 
-	rdist_ctx->gicr_igroupr0 = gicr_read_igroupr0(gicr_base);
-	rdist_ctx->gicr_isenabler0 = gicr_read_isenabler0(gicr_base);
-	rdist_ctx->gicr_ispendr0 = gicr_read_ispendr0(gicr_base);
-	rdist_ctx->gicr_isactiver0 = gicr_read_isactiver0(gicr_base);
-	rdist_ctx->gicr_icfgr0 = gicr_read_icfgr0(gicr_base);
-	rdist_ctx->gicr_icfgr1 = gicr_read_icfgr1(gicr_base);
-	rdist_ctx->gicr_igrpmodr0 = gicr_read_igrpmodr0(gicr_base);
-	rdist_ctx->gicr_nsacr = gicr_read_nsacr(gicr_base);
-	for (int_id = MIN_SGI_ID; int_id < TOTAL_PCPU_INTR_NUM;
-			int_id += (1U << IPRIORITYR_SHIFT)) {
-		rdist_ctx->gicr_ipriorityr[(int_id - MIN_SGI_ID) >> IPRIORITYR_SHIFT] =
-				gicr_read_ipriorityr(gicr_base, int_id);
+	/* 32 interrupt IDs per register */
+	for (i = 0U; i < ppi_regs_num; ++i) {
+		SAVE_GICR_REG(gicr_base, rdist_ctx, igroupr, i);
+		SAVE_GICR_REG(gicr_base, rdist_ctx, isenabler, i);
+		SAVE_GICR_REG(gicr_base, rdist_ctx, ispendr, i);
+		SAVE_GICR_REG(gicr_base, rdist_ctx, isactiver, i);
+		SAVE_GICR_REG(gicr_base, rdist_ctx, igrpmodr, i);
 	}
 
+	/* 16 interrupt IDs per GICR_ICFGR register */
+	regs_num = ppi_regs_num << 1;
+	for (i = 0U; i < regs_num; ++i) {
+		SAVE_GICR_REG(gicr_base, rdist_ctx, icfgr, i);
+	}
+
+	rdist_ctx->gicr_nsacr = gicr_read_nsacr(gicr_base);
+
+	/* 4 interrupt IDs per GICR_IPRIORITYR register */
+	regs_num = ppi_regs_num << 3;
+	for (i = 0U; i < regs_num; ++i) {
+		SAVE_GICR_REG(gicr_base, rdist_ctx, ipriorityr, i);
+	}
 
 	/*
 	 * Call the pre-save hook that implements the IMP DEF sequence that may
@@ -546,7 +608,7 @@
 				const gicv3_redist_ctx_t * const rdist_ctx)
 {
 	uintptr_t gicr_base;
-	unsigned int int_id;
+	unsigned int i, ppi_regs_num, regs_num;
 
 	assert(gicv3_driver_data != NULL);
 	assert(proc_num < gicv3_driver_data->rdistif_num);
@@ -556,6 +618,17 @@
 
 	gicr_base = gicv3_driver_data->rdistif_base_addrs[proc_num];
 
+#if GIC_EXT_INTID
+	/* Calculate number of PPI registers */
+	ppi_regs_num = (unsigned int)((gicr_read_typer(gicr_base) >>
+			TYPER_PPI_NUM_SHIFT) & TYPER_PPI_NUM_MASK) + 1;
+	/* All other values except PPInum [0-2] are reserved */
+	if (ppi_regs_num > 3U) {
+		ppi_regs_num = 1U;
+	}
+#else
+	ppi_regs_num = 1U;
+#endif
 	/* Power on redistributor */
 	gicv3_rdistif_on(proc_num);
 
@@ -567,11 +640,14 @@
 	gicv3_distif_post_restore(proc_num);
 
 	/*
-	 * Disable all SGIs (imp. def.)/PPIs before configuring them. This is a
-	 * more scalable approach as it avoids clearing the enable bits in the
-	 * GICD_CTLR
+	 * Disable all SGIs (imp. def.)/(E)PPIs before configuring them.
+	 * This is a more scalable approach as it avoids clearing the enable
+	 * bits in the GICD_CTLR.
 	 */
-	gicr_write_icenabler0(gicr_base, ~0U);
+	for (i = 0U; i < ppi_regs_num; ++i) {
+		gicr_write_icenabler(gicr_base, i, ~0U);
+	}
+
 	/* Wait for pending writes to GICR_ICENABLER */
 	gicr_wait_for_pending_write(gicr_base);
 
@@ -586,30 +662,44 @@
 	gicr_write_propbaser(gicr_base, rdist_ctx->gicr_propbaser);
 	gicr_write_pendbaser(gicr_base, rdist_ctx->gicr_pendbaser);
 
-	gicr_write_igroupr0(gicr_base, rdist_ctx->gicr_igroupr0);
-
-	for (int_id = MIN_SGI_ID; int_id < TOTAL_PCPU_INTR_NUM;
-			int_id += (1U << IPRIORITYR_SHIFT)) {
-		gicr_write_ipriorityr(gicr_base, int_id,
-		rdist_ctx->gicr_ipriorityr[
-				(int_id - MIN_SGI_ID) >> IPRIORITYR_SHIFT]);
+	/* 32 interrupt IDs per register */
+	for (i = 0U; i < ppi_regs_num; ++i) {
+		RESTORE_GICR_REG(gicr_base, rdist_ctx, igroupr, i);
+		RESTORE_GICR_REG(gicr_base, rdist_ctx, igrpmodr, i);
 	}
 
-	gicr_write_icfgr0(gicr_base, rdist_ctx->gicr_icfgr0);
-	gicr_write_icfgr1(gicr_base, rdist_ctx->gicr_icfgr1);
-	gicr_write_igrpmodr0(gicr_base, rdist_ctx->gicr_igrpmodr0);
+	/* 4 interrupt IDs per GICR_IPRIORITYR register */
+	regs_num = ppi_regs_num << 3;
+	for (i = 0U; i < regs_num; ++i) {
+		RESTORE_GICR_REG(gicr_base, rdist_ctx, ipriorityr, i);
+	}
+
+	/* 16 interrupt IDs per GICR_ICFGR register */
+	regs_num = ppi_regs_num << 1;
+	for (i = 0U; i < regs_num; ++i) {
+		RESTORE_GICR_REG(gicr_base, rdist_ctx, icfgr, i);
+	}
+
 	gicr_write_nsacr(gicr_base, rdist_ctx->gicr_nsacr);
 
-	/* Restore after group and priorities are set */
-	gicr_write_ispendr0(gicr_base, rdist_ctx->gicr_ispendr0);
-	gicr_write_isactiver0(gicr_base, rdist_ctx->gicr_isactiver0);
+	/* Restore after group and priorities are set.
+	 * 32 interrupt IDs per register
+	 */
+	for (i = 0U; i < ppi_regs_num; ++i) {
+		RESTORE_GICR_REG(gicr_base, rdist_ctx, ispendr, i);
+		RESTORE_GICR_REG(gicr_base, rdist_ctx, isactiver, i);
+	}
 
 	/*
 	 * Wait for all writes to the Distributor to complete before enabling
-	 * the SGI and PPIs.
+	 * the SGI and (E)PPIs.
 	 */
 	gicr_wait_for_upstream_pending_write(gicr_base);
-	gicr_write_isenabler0(gicr_base, rdist_ctx->gicr_isenabler0);
+
+	/* 32 interrupt IDs per GICR_ISENABLER register */
+	for (i = 0U; i < ppi_regs_num; ++i) {
+		RESTORE_GICR_REG(gicr_base, rdist_ctx, isenabler, i);
+	}
 
 	/*
 	 * Restore GICR_CTLR.Enable_LPIs bit and wait for pending writes in case
@@ -627,7 +717,10 @@
  *****************************************************************************/
 void gicv3_distif_save(gicv3_dist_ctx_t * const dist_ctx)
 {
-	unsigned int num_ints;
+	unsigned int typer_reg, num_ints;
+#if GIC_EXT_INTID
+	unsigned int num_eints;
+#endif
 
 	assert(gicv3_driver_data != NULL);
 	assert(gicv3_driver_data->gicd_base != 0U);
@@ -636,14 +729,28 @@
 
 	uintptr_t gicd_base = gicv3_driver_data->gicd_base;
 
-	num_ints = gicd_read_typer(gicd_base);
-	num_ints &= TYPER_IT_LINES_NO_MASK;
-	num_ints = (num_ints + 1U) << 5;
+	typer_reg = gicd_read_typer(gicd_base);
+
+	/* Maximum SPI INTID is 32 * (GICD_TYPER.ITLinesNumber + 1) - 1 */
+	num_ints = ((typer_reg & TYPER_IT_LINES_NO_MASK) + 1U) << 5;
 
 	/* Filter out special INTIDs 1020-1023 */
-	if (num_ints > (MAX_SPI_ID + 1U))
+	if (num_ints > (MAX_SPI_ID + 1U)) {
 		num_ints = MAX_SPI_ID + 1U;
+	}
 
+#if GIC_EXT_INTID
+	/* Check if extended SPI range is implemented */
+	if ((typer_reg & TYPER_ESPI) != 0U) {
+		/*
+		 * Maximum ESPI INTID is 32 * (GICD_TYPER.ESPI_range + 1) + 4095
+		 */
+		num_eints = ((((typer_reg >> TYPER_ESPI_RANGE_SHIFT) &
+			TYPER_ESPI_RANGE_MASK) + 1U) << 5) + MIN_ESPI_ID - 1;
+	} else {
+		num_eints = 0U;
+	}
+#endif
 	/* Wait for pending write to complete */
 	gicd_wait_for_pending_write(gicd_base);
 
@@ -651,31 +758,58 @@
 	dist_ctx->gicd_ctlr = gicd_read_ctlr(gicd_base);
 
 	/* Save GICD_IGROUPR for INTIDs 32 - 1019 */
-	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, igroupr, IGROUPR);
+	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, igroupr, IGROUP);
+
+	/* Save GICD_IGROUPRE for INTIDs 4096 - 5119 */
+	SAVE_GICD_EREGS(gicd_base, dist_ctx, num_eints, igroupr, IGROUP);
 
 	/* Save GICD_ISENABLER for INT_IDs 32 - 1019 */
-	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, isenabler, ISENABLER);
+	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, isenabler, ISENABLE);
+
+	/* Save GICD_ISENABLERE for INT_IDs 4096 - 5119 */
+	SAVE_GICD_EREGS(gicd_base, dist_ctx, num_eints, isenabler, ISENABLE);
 
 	/* Save GICD_ISPENDR for INTIDs 32 - 1019 */
-	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, ispendr, ISPENDR);
+	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, ispendr, ISPEND);
+
+	/* Save GICD_ISPENDRE for INTIDs 4096 - 5119 */
+	SAVE_GICD_EREGS(gicd_base, dist_ctx, num_eints,	ispendr, ISPEND);
 
 	/* Save GICD_ISACTIVER for INTIDs 32 - 1019 */
-	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, isactiver, ISACTIVER);
+	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, isactiver, ISACTIVE);
+
+	/* Save GICD_ISACTIVERE for INTIDs 4096 - 5119 */
+	SAVE_GICD_EREGS(gicd_base, dist_ctx, num_eints, isactiver, ISACTIVE);
 
 	/* Save GICD_IPRIORITYR for INTIDs 32 - 1019 */
-	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, ipriorityr, IPRIORITYR);
+	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, ipriorityr, IPRIORITY);
+
+	/* Save GICD_IPRIORITYRE for INTIDs 4096 - 5119 */
+	SAVE_GICD_EREGS(gicd_base, dist_ctx, num_eints, ipriorityr, IPRIORITY);
 
 	/* Save GICD_ICFGR for INTIDs 32 - 1019 */
-	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, icfgr, ICFGR);
+	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, icfgr, ICFG);
+
+	/* Save GICD_ICFGRE for INTIDs 4096 - 5119 */
+	SAVE_GICD_EREGS(gicd_base, dist_ctx, num_eints, icfgr, ICFG);
 
 	/* Save GICD_IGRPMODR for INTIDs 32 - 1019 */
-	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, igrpmodr, IGRPMODR);
+	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, igrpmodr, IGRPMOD);
+
+	/* Save GICD_IGRPMODRE for INTIDs 4096 - 5119 */
+	SAVE_GICD_EREGS(gicd_base, dist_ctx, num_eints, igrpmodr, IGRPMOD);
 
 	/* Save GICD_NSACR for INTIDs 32 - 1019 */
-	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, nsacr, NSACR);
+	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, nsacr, NSAC);
+
+	/* Save GICD_NSACRE for INTIDs 4096 - 5119 */
+	SAVE_GICD_EREGS(gicd_base, dist_ctx, num_eints, nsacr, NSAC);
 
 	/* Save GICD_IROUTER for INTIDs 32 - 1019 */
-	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, irouter, IROUTER);
+	SAVE_GICD_REGS(gicd_base, dist_ctx, num_ints, irouter, IROUTE);
+
+	/* Save GICD_IROUTERE for INTIDs 4096 - 5119 */
+	SAVE_GICD_EREGS(gicd_base, dist_ctx, num_eints, irouter, IROUTE);
 
 	/*
 	 * GICD_ITARGETSR<n> and GICD_SPENDSGIR<n> are RAZ/WI when
@@ -693,7 +827,10 @@
  *****************************************************************************/
 void gicv3_distif_init_restore(const gicv3_dist_ctx_t * const dist_ctx)
 {
-	unsigned int num_ints = 0U;
+	unsigned int typer_reg, num_ints;
+#if GIC_EXT_INTID
+	unsigned int num_eints;
+#endif
 
 	assert(gicv3_driver_data != NULL);
 	assert(gicv3_driver_data->gicd_base != 0U);
@@ -716,50 +853,90 @@
 	/* Set the ARE_S and ARE_NS bit now that interrupts have been disabled */
 	gicd_set_ctlr(gicd_base, CTLR_ARE_S_BIT | CTLR_ARE_NS_BIT, RWP_TRUE);
 
-	num_ints = gicd_read_typer(gicd_base);
-	num_ints &= TYPER_IT_LINES_NO_MASK;
-	num_ints = (num_ints + 1U) << 5;
+	typer_reg = gicd_read_typer(gicd_base);
+
+	/* Maximum SPI INTID is 32 * (GICD_TYPER.ITLinesNumber + 1) - 1 */
+	num_ints = ((typer_reg & TYPER_IT_LINES_NO_MASK) + 1U) << 5;
 
 	/* Filter out special INTIDs 1020-1023 */
-	if (num_ints > (MAX_SPI_ID + 1U))
+	if (num_ints > (MAX_SPI_ID + 1U)) {
 		num_ints = MAX_SPI_ID + 1U;
+	}
 
+#if GIC_EXT_INTID
+	/* Check if extended SPI range is implemented */
+	if ((typer_reg & TYPER_ESPI) != 0U) {
+		/*
+		 * Maximum ESPI INTID is 32 * (GICD_TYPER.ESPI_range + 1) + 4095
+		 */
+		num_eints = ((((typer_reg >> TYPER_ESPI_RANGE_SHIFT) &
+			TYPER_ESPI_RANGE_MASK) + 1U) << 5) + MIN_ESPI_ID - 1;
+	} else {
+		num_eints = 0U;
+	}
+#endif
 	/* Restore GICD_IGROUPR for INTIDs 32 - 1019 */
-	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, igroupr, IGROUPR);
+	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, igroupr, IGROUP);
+
+	/* Restore GICD_IGROUPRE for INTIDs 4096 - 5119 */
+	RESTORE_GICD_EREGS(gicd_base, dist_ctx, num_eints, igroupr, IGROUP);
 
 	/* Restore GICD_IPRIORITYR for INTIDs 32 - 1019 */
-	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, ipriorityr, IPRIORITYR);
+	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, ipriorityr, IPRIORITY);
+
+	/* Restore GICD_IPRIORITYRE for INTIDs 4096 - 5119 */
+	RESTORE_GICD_EREGS(gicd_base, dist_ctx, num_eints, ipriorityr, IPRIORITY);
 
 	/* Restore GICD_ICFGR for INTIDs 32 - 1019 */
-	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, icfgr, ICFGR);
+	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, icfgr, ICFG);
+
+	/* Restore GICD_ICFGRE for INTIDs 4096 - 5119 */
+	RESTORE_GICD_EREGS(gicd_base, dist_ctx, num_eints, icfgr, ICFG);
 
 	/* Restore GICD_IGRPMODR for INTIDs 32 - 1019 */
-	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, igrpmodr, IGRPMODR);
+	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, igrpmodr, IGRPMOD);
+
+	/* Restore GICD_IGRPMODRE for INTIDs 4096 - 5119 */
+	RESTORE_GICD_EREGS(gicd_base, dist_ctx, num_eints, igrpmodr, IGRPMOD);
 
 	/* Restore GICD_NSACR for INTIDs 32 - 1019 */
-	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, nsacr, NSACR);
+	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, nsacr, NSAC);
+
+	/* Restore GICD_NSACRE for INTIDs 4096 - 5119 */
+	RESTORE_GICD_EREGS(gicd_base, dist_ctx, num_eints, nsacr, NSAC);
 
 	/* Restore GICD_IROUTER for INTIDs 32 - 1019 */
-	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, irouter, IROUTER);
+	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, irouter, IROUTE);
+
+	/* Restore GICD_IROUTERE for INTIDs 4096 - 5119 */
+	RESTORE_GICD_EREGS(gicd_base, dist_ctx, num_eints, irouter, IROUTE);
 
 	/*
-	 * Restore ISENABLER, ISPENDR and ISACTIVER after the interrupts are
-	 * configured.
+	 * Restore ISENABLER(E), ISPENDR(E) and ISACTIVER(E) after
+	 * the interrupts are configured.
 	 */
 
 	/* Restore GICD_ISENABLER for INT_IDs 32 - 1019 */
-	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, isenabler, ISENABLER);
+	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, isenabler, ISENABLE);
+
+	/* Restore GICD_ISENABLERE for INT_IDs 4096 - 5119 */
+	RESTORE_GICD_EREGS(gicd_base, dist_ctx, num_eints, isenabler, ISENABLE);
 
 	/* Restore GICD_ISPENDR for INTIDs 32 - 1019 */
-	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, ispendr, ISPENDR);
+	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, ispendr, ISPEND);
+
+	/* Restore GICD_ISPENDRE for INTIDs 4096 - 5119 */
+	RESTORE_GICD_EREGS(gicd_base, dist_ctx, num_eints, ispendr, ISPEND);
 
 	/* Restore GICD_ISACTIVER for INTIDs 32 - 1019 */
-	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, isactiver, ISACTIVER);
+	RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, isactiver, ISACTIVE);
+
+	/* Restore GICD_ISACTIVERE for INTIDs 4096 - 5119 */
+	RESTORE_GICD_EREGS(gicd_base, dist_ctx, num_eints, isactiver, ISACTIVE);
 
 	/* Restore the GICD_CTLR */
 	gicd_write_ctlr(gicd_base, dist_ctx->gicd_ctlr);
 	gicd_wait_for_pending_write(gicd_base);
-
 }
 
 /*******************************************************************************
@@ -774,28 +951,25 @@
 /*******************************************************************************
  * This function checks if the interrupt identified by id is active (whether the
  * state is either active, or active and pending). The proc_num is used if the
- * interrupt is SGI or PPI and programs the corresponding Redistributor
+ * interrupt is SGI or (E)PPI and programs the corresponding Redistributor
  * interface.
  ******************************************************************************/
 unsigned int gicv3_get_interrupt_active(unsigned int id, unsigned int proc_num)
 {
-	unsigned int value;
-
 	assert(gicv3_driver_data != NULL);
 	assert(gicv3_driver_data->gicd_base != 0U);
 	assert(proc_num < gicv3_driver_data->rdistif_num);
 	assert(gicv3_driver_data->rdistif_base_addrs != NULL);
-	assert(id <= MAX_SPI_ID);
 
-	if (id < MIN_SPI_ID) {
-		/* For SGIs and PPIs */
-		value = gicr_get_isactiver0(
-				gicv3_driver_data->rdistif_base_addrs[proc_num], id);
-	} else {
-		value = gicd_get_isactiver(gicv3_driver_data->gicd_base, id);
+	/* Check interrupt ID */
+	if (is_sgi_ppi(id)) {
+		/* For SGIs: 0-15, PPIs: 16-31 and EPPIs: 1056-1119 */
+		return gicr_get_isactiver(
+			gicv3_driver_data->rdistif_base_addrs[proc_num], id);
 	}
 
-	return value;
+	/* For SPIs: 32-1019 and ESPIs: 4096-5119 */
+	return gicd_get_isactiver(gicv3_driver_data->gicd_base, id);
 }
 
 /*******************************************************************************
@@ -809,19 +983,20 @@
 	assert(gicv3_driver_data->gicd_base != 0U);
 	assert(proc_num < gicv3_driver_data->rdistif_num);
 	assert(gicv3_driver_data->rdistif_base_addrs != NULL);
-	assert(id <= MAX_SPI_ID);
 
 	/*
 	 * Ensure that any shared variable updates depending on out of band
 	 * interrupt trigger are observed before enabling interrupt.
 	 */
 	dsbishst();
-	if (id < MIN_SPI_ID) {
-		/* For SGIs and PPIs */
-		gicr_set_isenabler0(
-				gicv3_driver_data->rdistif_base_addrs[proc_num],
-				id);
+
+	/* Check interrupt ID */
+	if (is_sgi_ppi(id)) {
+		/* For SGIs: 0-15, PPIs: 16-31 and EPPIs: 1056-1119 */
+		gicr_set_isenabler(
+			gicv3_driver_data->rdistif_base_addrs[proc_num], id);
 	} else {
+		/* For SPIs: 32-1019 and ESPIs: 4096-5119 */
 		gicd_set_isenabler(gicv3_driver_data->gicd_base, id);
 	}
 }
@@ -837,22 +1012,23 @@
 	assert(gicv3_driver_data->gicd_base != 0U);
 	assert(proc_num < gicv3_driver_data->rdistif_num);
 	assert(gicv3_driver_data->rdistif_base_addrs != NULL);
-	assert(id <= MAX_SPI_ID);
 
 	/*
 	 * Disable interrupt, and ensure that any shared variable updates
 	 * depending on out of band interrupt trigger are observed afterwards.
 	 */
-	if (id < MIN_SPI_ID) {
-		/* For SGIs and PPIs */
-		gicr_set_icenabler0(
-				gicv3_driver_data->rdistif_base_addrs[proc_num],
-				id);
+
+	/* Check interrupt ID */
+	if (is_sgi_ppi(id)) {
+		/* For SGIs: 0-15, PPIs: 16-31 and EPPIs: 1056-1119 */
+		gicr_set_icenabler(
+			gicv3_driver_data->rdistif_base_addrs[proc_num], id);
 
 		/* Write to clear enable requires waiting for pending writes */
 		gicr_wait_for_pending_write(
-				gicv3_driver_data->rdistif_base_addrs[proc_num]);
+			gicv3_driver_data->rdistif_base_addrs[proc_num]);
 	} else {
+		/* For SPIs: 32-1019 and ESPIs: 4096-5119 */
 		gicd_set_icenabler(gicv3_driver_data->gicd_base, id);
 
 		/* Write to clear enable requires waiting for pending writes */
@@ -875,19 +1051,21 @@
 	assert(gicv3_driver_data->gicd_base != 0U);
 	assert(proc_num < gicv3_driver_data->rdistif_num);
 	assert(gicv3_driver_data->rdistif_base_addrs != NULL);
-	assert(id <= MAX_SPI_ID);
 
-	if (id < MIN_SPI_ID) {
+	/* Check interrupt ID */
+	if (is_sgi_ppi(id)) {
+		/* For SGIs: 0-15, PPIs: 16-31 and EPPIs: 1056-1119 */
 		gicr_base = gicv3_driver_data->rdistif_base_addrs[proc_num];
 		gicr_set_ipriorityr(gicr_base, id, priority);
 	} else {
+		/* For SPIs: 32-1019 and ESPIs: 4096-5119 */
 		gicd_set_ipriorityr(gicv3_driver_data->gicd_base, id, priority);
 	}
 }
 
 /*******************************************************************************
  * This function assigns group for the interrupt identified by id. The proc_num
- * is used if the interrupt is SGI or PPI, and programs the corresponding
+ * is used if the interrupt is SGI or (E)PPI, and programs the corresponding
  * Redistributor interface. The group can be any of GICV3_INTR_GROUP*
  ******************************************************************************/
 void gicv3_set_interrupt_type(unsigned int id, unsigned int proc_num,
@@ -919,29 +1097,26 @@
 		break;
 	}
 
-	if (id < MIN_SPI_ID) {
+	/* Check interrupt ID */
+	if (is_sgi_ppi(id)) {
+		/* For SGIs: 0-15, PPIs: 16-31 and EPPIs: 1056-1119 */
 		gicr_base = gicv3_driver_data->rdistif_base_addrs[proc_num];
-		if (igroup)
-			gicr_set_igroupr0(gicr_base, id);
-		else
-			gicr_clr_igroupr0(gicr_base, id);
 
-		if (grpmod)
-			gicr_set_igrpmodr0(gicr_base, id);
-		else
-			gicr_clr_igrpmodr0(gicr_base, id);
+		igroup ? gicr_set_igroupr(gicr_base, id) :
+			 gicr_clr_igroupr(gicr_base, id);
+		grpmod ? gicr_set_igrpmodr(gicr_base, id) :
+			 gicr_clr_igrpmodr(gicr_base, id);
 	} else {
+		/* For SPIs: 32-1019 and ESPIs: 4096-5119 */
+
 		/* Serialize read-modify-write to Distributor registers */
 		spin_lock(&gic_lock);
-		if (igroup)
-			gicd_set_igroupr(gicv3_driver_data->gicd_base, id);
-		else
-			gicd_clr_igroupr(gicv3_driver_data->gicd_base, id);
 
-		if (grpmod)
-			gicd_set_igrpmodr(gicv3_driver_data->gicd_base, id);
-		else
-			gicd_clr_igrpmodr(gicv3_driver_data->gicd_base, id);
+		igroup ? gicd_set_igroupr(gicv3_driver_data->gicd_base, id) :
+			 gicd_clr_igroupr(gicv3_driver_data->gicd_base, id);
+		grpmod ? gicd_set_igrpmodr(gicv3_driver_data->gicd_base, id) :
+			 gicd_clr_igrpmodr(gicv3_driver_data->gicd_base, id);
+
 		spin_unlock(&gic_lock);
 	}
 }
@@ -986,7 +1161,7 @@
 }
 
 /*******************************************************************************
- * This function sets the interrupt routing for the given SPI interrupt id.
+ * This function sets the interrupt routing for the given (E)SPI interrupt id.
  * The interrupt routing is specified in routing mode and mpidr.
  *
  * The routing mode can be either of:
@@ -1005,7 +1180,8 @@
 	assert(gicv3_driver_data->gicd_base != 0U);
 
 	assert((irm == GICV3_IRM_ANY) || (irm == GICV3_IRM_PE));
-	assert((id >= MIN_SPI_ID) && (id <= MAX_SPI_ID));
+
+	assert(IS_SPI(id));
 
 	aff = gicd_irouter_val_from_mpidr(mpidr, irm);
 	gicd_write_irouter(gicv3_driver_data->gicd_base, id, aff);
@@ -1025,7 +1201,7 @@
 
 /*******************************************************************************
  * This function clears the pending status of an interrupt identified by id.
- * The proc_num is used if the interrupt is SGI or PPI, and programs the
+ * The proc_num is used if the interrupt is SGI or (E)PPI, and programs the
  * corresponding Redistributor interface.
  ******************************************************************************/
 void gicv3_clear_interrupt_pending(unsigned int id, unsigned int proc_num)
@@ -1039,13 +1215,17 @@
 	 * Clear pending interrupt, and ensure that any shared variable updates
 	 * depending on out of band interrupt trigger are observed afterwards.
 	 */
-	if (id < MIN_SPI_ID) {
-		/* For SGIs and PPIs */
-		gicr_set_icpendr0(gicv3_driver_data->rdistif_base_addrs[proc_num],
-				id);
+
+	/* Check interrupt ID */
+	if (is_sgi_ppi(id)) {
+		/* For SGIs: 0-15, PPIs: 16-31 and EPPIs: 1056-1119 */
+		gicr_set_icpendr(
+			gicv3_driver_data->rdistif_base_addrs[proc_num], id);
 	} else {
+		/* For SPIs: 32-1019 and ESPIs: 4096-5119 */
 		gicd_set_icpendr(gicv3_driver_data->gicd_base, id);
 	}
+
 	dsbishst();
 }
 
@@ -1066,11 +1246,14 @@
 	 * interrupt trigger are observed before setting interrupt pending.
 	 */
 	dsbishst();
-	if (id < MIN_SPI_ID) {
-		/* For SGIs and PPIs */
-		gicr_set_ispendr0(gicv3_driver_data->rdistif_base_addrs[proc_num],
-				id);
+
+	/* Check interrupt ID */
+	if (is_sgi_ppi(id)) {
+		/* For SGIs: 0-15, PPIs: 16-31 and EPPIs: 1056-1119 */
+		gicr_set_ispendr(
+			gicv3_driver_data->rdistif_base_addrs[proc_num], id);
 	} else {
+		/* For SPIs: 32-1019 and ESPIs: 4096-5119 */
 		gicd_set_ispendr(gicv3_driver_data->gicd_base, id);
 	}
 }
@@ -1083,7 +1266,7 @@
 {
 	unsigned int old_mask;
 
-	old_mask = (uint32_t) read_icc_pmr_el1();
+	old_mask = (unsigned int)read_icc_pmr_el1();
 
 	/*
 	 * Order memory updates w.r.t. PMR write, and ensure they're visible
@@ -1130,15 +1313,17 @@
 			mpidr = mpidr_from_gicr_typer(typer_val);
 			proc_num = gicv3_driver_data->mpidr_to_core_pos(mpidr);
 		} else {
-			proc_num = (unsigned int)(typer_val >> TYPER_PROC_NUM_SHIFT) &
-					TYPER_PROC_NUM_MASK;
+			proc_num = (unsigned int)(typer_val >>
+				TYPER_PROC_NUM_SHIFT) & TYPER_PROC_NUM_MASK;
 		}
 		if (proc_num == proc_self) {
 			/* The base address doesn't need to be initialized on
 			 * every warm boot.
 			 */
-			if (gicv3_driver_data->rdistif_base_addrs[proc_num] != 0U)
+			if (gicv3_driver_data->rdistif_base_addrs[proc_num]
+								!= 0U) {
 				return 0;
+			}
 			gicv3_driver_data->rdistif_base_addrs[proc_num] =
 			rdistif_base;
 			gicr_frame_found = true;
@@ -1147,8 +1332,9 @@
 		rdistif_base += (uintptr_t)(ULL(1) << GICR_PCPUBASE_SHIFT);
 	} while ((typer_val & TYPER_LAST_BIT) == 0U);
 
-	if (!gicr_frame_found)
+	if (!gicr_frame_found) {
 		return -1;
+	}
 
 	/*
 	 * Flush the driver data to ensure coherency. This is
@@ -1164,3 +1350,23 @@
 #endif
 	return 0; /* Found matching GICR frame */
 }
+
+/******************************************************************************
+ * This function checks the interrupt ID and returns true for SGIs and (E)PPIs
+ * and false for (E)SPIs IDs.
+ *****************************************************************************/
+static bool is_sgi_ppi(unsigned int id)
+{
+	/* SGIs: 0-15, PPIs: 16-31, EPPIs: 1056-1119 */
+	if (IS_SGI_PPI(id)) {
+		return true;
+	}
+
+	/* SPIs: 32-1019, ESPIs: 4096-5119 */
+	if (IS_SPI(id)) {
+		return false;
+	}
+
+	assert(false);
+	panic();
+}
diff --git a/drivers/arm/gic/v3/gicv3_private.h b/drivers/arm/gic/v3/gicv3_private.h
index dae01cb..26c8de5 100644
--- a/drivers/arm/gic/v3/gicv3_private.h
+++ b/drivers/arm/gic/v3/gicv3_private.h
@@ -26,40 +26,60 @@
 
 /* Calculate GIC register bit number corresponding to its interrupt ID */
 #define	BIT_NUM(REG, id)	\
-	((id) & ((1U << REG##_SHIFT) - 1U))
+	((id) & ((1U << REG##R_SHIFT) - 1U))
 
-/* Calculate 8-bit GICD register offset corresponding to its interrupt ID */
+/*
+ * Calculate 8, 32 and 64-bit GICD register offset
+ * corresponding to its interrupt ID
+ */
+#if GIC_EXT_INTID
+	/* GICv3.1 */
+#define	GICD_OFFSET_8(REG, id)				\
+	(((id) <= MAX_SPI_ID) ?				\
+	GICD_##REG##R + (uintptr_t)(id) :		\
+	GICD_##REG##RE + (uintptr_t)(id) - MIN_ESPI_ID)
+
+#define	GICD_OFFSET(REG, id)						\
+	(((id) <= MAX_SPI_ID) ?						\
+	GICD_##REG##R + (((uintptr_t)(id) >> REG##R_SHIFT) << 2) :	\
+	GICD_##REG##RE + ((((uintptr_t)(id) - MIN_ESPI_ID) >>		\
+					REG##R_SHIFT) << 2))
+
+#define	GICD_OFFSET_64(REG, id)						\
+	(((id) <= MAX_SPI_ID) ?						\
+	GICD_##REG##R + (((uintptr_t)(id) >> REG##R_SHIFT) << 3) :	\
+	GICD_##REG##RE + (((uintptr_t)(id) - MIN_ESPI_ID) << 3))
+
+#else	/* GICv3 */
 #define	GICD_OFFSET_8(REG, id)	\
-	GICD_##REG + (id)
+	(GICD_##REG##R + (uintptr_t)(id))
 
-/* Calculate 32-bit GICD register offset corresponding to its interrupt ID */
 #define	GICD_OFFSET(REG, id)	\
-	GICD_##REG + (((id) >> REG##_SHIFT) << 2)
+	(GICD_##REG##R + (((uintptr_t)(id) >> REG##R_SHIFT) << 2))
 
-/* Calculate 64-bit GICD register offset corresponding to its interrupt ID */
 #define	GICD_OFFSET_64(REG, id)	\
-	GICD_##REG + (((id) >> REG##_SHIFT) << 3)
+	(GICD_##REG##R + (((uintptr_t)(id) >> REG##R_SHIFT) << 3))
+#endif	/* GIC_EXT_INTID */
 
-/* Read 32-bit GIC Distributor register corresponding to its interrupt ID */
+/*
+ * Read/Write 8, 32 and 64-bit GIC Distributor register
+ * corresponding to its interrupt ID
+ */
 #define GICD_READ(REG, base, id)	\
 	mmio_read_32((base) + GICD_OFFSET(REG, (id)))
 
-/* Read 64-bit GIC Distributor register corresponding to its interrupt ID */
 #define GICD_READ_64(REG, base, id)	\
 	mmio_read_64((base) + GICD_OFFSET_64(REG, (id)))
 
-/* Write to 64-bit GIC Distributor register corresponding to its interrupt ID */
-#define GICD_WRITE_64(REG, base, id, val)	\
-	mmio_write_64((base) + GICD_OFFSET_64(REG, (id)), (val))
-
-/* Write to 32-bit GIC Distributor register corresponding to its interrupt ID */
-#define GICD_WRITE(REG, base, id, val)		\
-	mmio_write_32((base) + GICD_OFFSET(REG, (id)), (val))
-
-/* Write to 8-bit GIC Distributor register corresponding to its interrupt ID */
 #define GICD_WRITE_8(REG, base, id, val)	\
 	mmio_write_8((base) + GICD_OFFSET_8(REG, (id)), (val))
 
+#define GICD_WRITE(REG, base, id, val)	\
+	mmio_write_32((base) + GICD_OFFSET(REG, (id)), (val))
+
+#define GICD_WRITE_64(REG, base, id, val)	\
+	mmio_write_64((base) + GICD_OFFSET_64(REG, (id)), (val))
+
 /*
  * Bit operations on GIC Distributor register corresponding
  * to its interrupt ID
@@ -80,19 +100,43 @@
 		((uint32_t)1 << BIT_NUM(REG, (id))))
 
 /* Write bit in GIC Distributor register */
-#define	GICD_WRITE_BIT(REG, base, id)				\
+#define	GICD_WRITE_BIT(REG, base, id)			\
 	mmio_write_32((base) + GICD_OFFSET(REG, (id)),	\
 		((uint32_t)1 << BIT_NUM(REG, (id))))
 
 /*
- * Calculate GICv3 GICR register offset
+ * Calculate 8 and 32-bit GICR register offset
+ * corresponding to its interrupt ID
  */
-#define GICR_OFFSET(REG, id)	\
-	GICR_##REG + (((id) >> REG##_SHIFT) << 2)
+#if GIC_EXT_INTID
+	/* GICv3.1 */
+#define	GICR_OFFSET_8(REG, id)				\
+	(((id) <= MAX_PPI_ID) ?				\
+	GICR_##REG##R + (uintptr_t)(id) :		\
+	GICR_##REG##R + (uintptr_t)(id) - (MIN_EPPI_ID - MIN_SPI_ID))
 
-/* Write to GIC Redistributor register corresponding to its interrupt ID */
-#define GICR_WRITE_8(REG, base, id, val)			\
-	mmio_write_8((base) + GICR_##REG + (id), (val))
+#define GICR_OFFSET(REG, id)						\
+	(((id) <= MAX_PPI_ID) ?						\
+	GICR_##REG##R + (((uintptr_t)(id) >> REG##R_SHIFT) << 2) :	\
+	GICR_##REG##R + ((((uintptr_t)(id) - (MIN_EPPI_ID - MIN_SPI_ID))\
+						>> REG##R_SHIFT) << 2))
+#else	/* GICv3 */
+#define	GICR_OFFSET_8(REG, id)	\
+	(GICR_##REG##R + (uintptr_t)(id))
+
+#define GICR_OFFSET(REG, id)	\
+	(GICR_##REG##R + (((uintptr_t)(id) >> REG##R_SHIFT) << 2))
+#endif
+
+/* Read/Write GIC Redistributor register corresponding to its interrupt ID */
+#define GICR_READ(REG, base, id)			\
+	mmio_read_32((base) + GICR_OFFSET(REG, (id)))
+
+#define GICR_WRITE_8(REG, base, id, val)		\
+	mmio_write_8((base) + GICR_OFFSET_8(REG, (id)), (val))
+
+#define GICR_WRITE(REG, base, id, val)			\
+	mmio_write((base) + GICR_OFFSET(REG, (id)), (val))
 
 /*
  * Bit operations on GIC Redistributor register
@@ -105,7 +149,7 @@
 
 /* Write bit in GIC Redistributor register */
 #define	GICR_WRITE_BIT(REG, base, id)				\
-	mmio_write_32((base) + GICR_OFFSET(REG, (id)),	\
+	mmio_write_32((base) + GICR_OFFSET(REG, (id)),		\
 		((uint32_t)1 << BIT_NUM(REG, (id))))
 
 /* Set bit in GIC Redistributor register */
@@ -157,10 +201,8 @@
  * Note: The raw register values correspond to multiple interrupt IDs and
  * the number of interrupt IDs involved depends on the register accessed.
  ******************************************************************************/
-uint32_t gicd_read_igrpmodr(uintptr_t base, unsigned int id);
-unsigned int gicr_read_ipriorityr(uintptr_t base, unsigned int id);
-void gicd_write_igrpmodr(uintptr_t base, unsigned int id, uint32_t val);
-void gicr_write_ipriorityr(uintptr_t base, unsigned int id, unsigned int val);
+unsigned int gicd_read_igrpmodr(uintptr_t base, unsigned int id);
+void gicd_write_igrpmodr(uintptr_t base, unsigned int id, unsigned int val);
 
 /*******************************************************************************
  * Private GICv3 function prototypes for accessing the GIC registers
@@ -169,22 +211,21 @@
  * the bit-field corresponding the single interrupt ID.
  ******************************************************************************/
 unsigned int gicd_get_igrpmodr(uintptr_t base, unsigned int id);
-unsigned int gicr_get_igrpmodr0(uintptr_t base, unsigned int id);
-unsigned int gicr_get_igroupr0(uintptr_t base, unsigned int id);
-unsigned int gicr_get_isactiver0(uintptr_t base, unsigned int id);
+unsigned int gicr_get_igrpmodr(uintptr_t base, unsigned int id);
+unsigned int gicr_get_igroupr(uintptr_t base, unsigned int id);
+unsigned int gicr_get_isactiver(uintptr_t base, unsigned int id);
 void gicd_set_igrpmodr(uintptr_t base, unsigned int id);
-void gicr_set_igrpmodr0(uintptr_t base, unsigned int id);
-void gicr_set_isenabler0(uintptr_t base, unsigned int id);
-void gicr_set_icenabler0(uintptr_t base, unsigned int id);
-void gicr_set_ispendr0(uintptr_t base, unsigned int id);
-void gicr_set_icpendr0(uintptr_t base, unsigned int id);
-void gicr_set_igroupr0(uintptr_t base, unsigned int id);
+void gicr_set_igrpmodr(uintptr_t base, unsigned int id);
+void gicr_set_isenabler(uintptr_t base, unsigned int id);
+void gicr_set_icenabler(uintptr_t base, unsigned int id);
+void gicr_set_ispendr(uintptr_t base, unsigned int id);
+void gicr_set_icpendr(uintptr_t base, unsigned int id);
+void gicr_set_igroupr(uintptr_t base, unsigned int id);
 void gicd_clr_igrpmodr(uintptr_t base, unsigned int id);
-void gicr_clr_igrpmodr0(uintptr_t base, unsigned int id);
-void gicr_clr_igroupr0(uintptr_t base, unsigned int id);
+void gicr_clr_igrpmodr(uintptr_t base, unsigned int id);
+void gicr_clr_igroupr(uintptr_t base, unsigned int id);
 void gicr_set_ipriorityr(uintptr_t base, unsigned int id, unsigned int pri);
-void gicr_set_icfgr0(uintptr_t base, unsigned int id, unsigned int cfg);
-void gicr_set_icfgr1(uintptr_t base, unsigned int id, unsigned int cfg);
+void gicr_set_icfgr(uintptr_t base, unsigned int id, unsigned int cfg);
 
 /*******************************************************************************
  * Private GICv3 helper function prototypes
@@ -208,10 +249,10 @@
  * GIC Distributor interface accessors
  ******************************************************************************/
 /*
- * Wait for updates to :
+ * Wait for updates to:
  * GICD_CTLR[2:0] - the Group Enables
- * GICD_CTLR[5:4] - the ARE bits
- * GICD_ICENABLERn - the clearing of enable state for SPIs
+ * GICD_CTLR[7:4] - the ARE bits, E1NWF bit and DS bit
+ * GICD_ICENABLER<n> - the clearing of enable state for SPIs
  */
 static inline void gicd_wait_for_pending_write(uintptr_t gicd_base)
 {
@@ -227,7 +268,7 @@
 static inline uint64_t gicd_read_irouter(uintptr_t base, unsigned int id)
 {
 	assert(id >= MIN_SPI_ID);
-	return GICD_READ_64(IROUTER, base, id);
+	return GICD_READ_64(IROUTE, base, id);
 }
 
 static inline void gicd_write_irouter(uintptr_t base,
@@ -235,7 +276,7 @@
 				      uint64_t affinity)
 {
 	assert(id >= MIN_SPI_ID);
-	GICD_WRITE_64(IROUTER, base, id, affinity);
+	GICD_WRITE_64(IROUTE, base, id, affinity);
 }
 
 static inline void gicd_clr_ctlr(uintptr_t base,
@@ -287,11 +328,12 @@
 }
 
 /*
- * Wait for updates to :
+ * Wait for updates to:
  * GICR_ICENABLER0
  * GICR_CTLR.DPG1S
  * GICR_CTLR.DPG1NS
  * GICR_CTLR.DPG0
+ * GICR_CTLR, which clears EnableLPIs from 1 to 0
  */
 static inline void gicr_wait_for_pending_write(uintptr_t gicr_base)
 {
@@ -314,61 +356,137 @@
  * Note: The raw register values correspond to multiple interrupt IDs and
  * the number of interrupt IDs involved depends on the register accessed.
  ******************************************************************************/
-static inline unsigned int gicr_read_icenabler0(uintptr_t base)
+
+/*
+ * Accessors to read/write GIC Redistributor ICENABLER0 and ICENABLERE
+ * register corresponding to its number
+ */
+static inline unsigned int gicr_read_icenabler(uintptr_t base,
+						unsigned int reg_num)
 {
-	return mmio_read_32(base + GICR_ICENABLER0);
+	return mmio_read_32(base + GICR_ICENABLER + (reg_num << 2));
 }
 
-static inline void gicr_write_icenabler0(uintptr_t base, unsigned int val)
+static inline void gicr_write_icenabler(uintptr_t base, unsigned int reg_num,
+					unsigned int val)
 {
-	mmio_write_32(base + GICR_ICENABLER0, val);
+	mmio_write_32(base + GICR_ICENABLER + (reg_num << 2), val);
 }
 
-static inline unsigned int gicr_read_isenabler0(uintptr_t base)
+/*
+ * Accessor to read/write GIC Redistributor ICFGR0, ICFGR1 and ICFGRE
+ * register corresponding to its number
+ */
+static inline unsigned int gicr_read_icfgr(uintptr_t base, unsigned int reg_num)
 {
-	return mmio_read_32(base + GICR_ISENABLER0);
+	return mmio_read_32(base + GICR_ICFGR + (reg_num << 2));
 }
 
-static inline void gicr_write_icpendr0(uintptr_t base, unsigned int val)
+static inline void gicr_write_icfgr(uintptr_t base, unsigned int reg_num,
+					unsigned int val)
 {
-	mmio_write_32(base + GICR_ICPENDR0, val);
+	mmio_write_32(base + GICR_ICFGR + (reg_num << 2), val);
 }
 
-static inline void gicr_write_isenabler0(uintptr_t base, unsigned int val)
+/*
+ * Accessors to read/write GIC Redistributor IGROUPR0 and IGROUPRE
+ * register corresponding to its number
+ */
+static inline unsigned int gicr_read_igroupr(uintptr_t base,
+						unsigned int reg_num)
 {
-	mmio_write_32(base + GICR_ISENABLER0, val);
+	return mmio_read_32(base + GICR_IGROUPR + (reg_num << 2));
 }
 
-static inline unsigned int gicr_read_igroupr0(uintptr_t base)
+static inline void gicr_write_igroupr(uintptr_t base, unsigned int reg_num,
+						unsigned int val)
 {
-	return mmio_read_32(base + GICR_IGROUPR0);
+	mmio_write_32(base + GICR_IGROUPR + (reg_num << 2), val);
 }
 
-static inline unsigned int gicr_read_ispendr0(uintptr_t base)
+/*
+ * Accessors to read/write GIC Redistributor IGRPMODR0 and IGRPMODRE
+ * register corresponding to its number
+ */
+static inline unsigned int gicr_read_igrpmodr(uintptr_t base,
+						unsigned int reg_num)
 {
-	return mmio_read_32(base + GICR_ISPENDR0);
+	return mmio_read_32(base + GICR_IGRPMODR + (reg_num << 2));
 }
 
-static inline void gicr_write_ispendr0(uintptr_t base, unsigned int val)
+static inline void gicr_write_igrpmodr(uintptr_t base, unsigned int reg_num,
+				       unsigned int val)
 {
-	mmio_write_32(base + GICR_ISPENDR0, val);
+	mmio_write_32(base + GICR_IGRPMODR + (reg_num << 2), val);
 }
 
-static inline void gicr_write_igroupr0(uintptr_t base, unsigned int val)
+/*
+ * Accessors to read/write the GIC Redistributor IPRIORITYR(E) register
+ * corresponding to its number, 4 interrupts IDs at a time.
+ */
+static inline unsigned int gicr_read_ipriorityr(uintptr_t base,
+						unsigned int reg_num)
 {
-	mmio_write_32(base + GICR_IGROUPR0, val);
+	return mmio_read_32(base + GICR_IPRIORITYR + (reg_num << 2));
 }
 
-static inline unsigned int gicr_read_igrpmodr0(uintptr_t base)
+static inline void gicr_write_ipriorityr(uintptr_t base, unsigned int reg_num,
+						unsigned int val)
 {
-	return mmio_read_32(base + GICR_IGRPMODR0);
+	mmio_write_32(base + GICR_IPRIORITYR + (reg_num << 2), val);
 }
 
-static inline void gicr_write_igrpmodr0(uintptr_t base, unsigned int val)
+/*
+ * Accessors to read/write GIC Redistributor ISACTIVER0 and ISACTIVERE
+ * register corresponding to its number
+ */
+static inline unsigned int gicr_read_isactiver(uintptr_t base,
+						unsigned int reg_num)
 {
-	mmio_write_32(base + GICR_IGRPMODR0, val);
+	return mmio_read_32(base + GICR_ISACTIVER + (reg_num << 2));
 }
 
+static inline void gicr_write_isactiver(uintptr_t base, unsigned int reg_num,
+					unsigned int val)
+{
+	mmio_write_32(base + GICR_ISACTIVER + (reg_num << 2), val);
+}
+
+/*
+ * Accessors to read/write GIC Redistributor ISENABLER0 and ISENABLERE
+ * register corresponding to its number
+ */
+static inline unsigned int gicr_read_isenabler(uintptr_t base,
+						unsigned int reg_num)
+{
+	return mmio_read_32(base + GICR_ISENABLER + (reg_num << 2));
+}
+
+static inline void gicr_write_isenabler(uintptr_t base, unsigned int reg_num,
+					unsigned int val)
+{
+	mmio_write_32(base + GICR_ISENABLER + (reg_num << 2), val);
+}
+
+/*
+ * Accessors to read/write GIC Redistributor ISPENDR0 and ISPENDRE
+ * register corresponding to its number
+ */
+static inline unsigned int gicr_read_ispendr(uintptr_t base,
+						unsigned int reg_num)
+{
+	return mmio_read_32(base + GICR_ISPENDR + (reg_num << 2));
+}
+
+static inline void gicr_write_ispendr(uintptr_t base, unsigned int reg_num,
+						unsigned int val)
+{
+	mmio_write_32(base + GICR_ISPENDR + (reg_num << 2), val);
+}
+
+/*
+ * Accessors to read/write GIC Redistributor NSACR register
+ */
 static inline unsigned int gicr_read_nsacr(uintptr_t base)
 {
 	return mmio_read_32(base + GICR_NSACR);
@@ -379,36 +497,9 @@
 	mmio_write_32(base + GICR_NSACR, val);
 }
 
-static inline unsigned int gicr_read_isactiver0(uintptr_t base)
-{
-	return mmio_read_32(base + GICR_ISACTIVER0);
-}
-
-static inline void gicr_write_isactiver0(uintptr_t base, unsigned int val)
-{
-	mmio_write_32(base + GICR_ISACTIVER0, val);
-}
-
-static inline unsigned int gicr_read_icfgr0(uintptr_t base)
-{
-	return mmio_read_32(base + GICR_ICFGR0);
-}
-
-static inline unsigned int gicr_read_icfgr1(uintptr_t base)
-{
-	return mmio_read_32(base + GICR_ICFGR1);
-}
-
-static inline void gicr_write_icfgr0(uintptr_t base, unsigned int val)
-{
-	mmio_write_32(base + GICR_ICFGR0, val);
-}
-
-static inline void gicr_write_icfgr1(uintptr_t base, unsigned int val)
-{
-	mmio_write_32(base + GICR_ICFGR1, val);
-}
-
+/*
+ * Accessors to read/write GIC Redistributor PROPBASER register
+ */
 static inline uint64_t gicr_read_propbaser(uintptr_t base)
 {
 	return mmio_read_64(base + GICR_PROPBASER);
@@ -419,6 +510,9 @@
 	mmio_write_64(base + GICR_PROPBASER, val);
 }
 
+/*
+ * Accessors to read/write GIC Redistributor PENDBASER register
+ */
 static inline uint64_t gicr_read_pendbaser(uintptr_t base)
 {
 	return mmio_read_64(base + GICR_PENDBASER);