plat/arm: rename rddanielxlr to rdv1mc
Reference Design platform RD-Daniel-ConfigXLR has been renamed to
RD-V1-MC. Correspondingly, remove all uses of 'rddanielxlr' and replace
it with 'rdv1mc' where appropriate.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I5d91c69738397b19ced43949b4080c74678e604c
diff --git a/plat/arm/board/rdv1mc/rdv1mc_plat.c b/plat/arm/board/rdv1mc/rdv1mc_plat.c
new file mode 100644
index 0000000..d859400
--- /dev/null
+++ b/plat/arm/board/rdv1mc/rdv1mc_plat.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <drivers/arm/gic600_multichip.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <sgi_soc_platform_def.h>
+#include <sgi_plat.h>
+
+#if defined(IMAGE_BL31)
+static const mmap_region_t rdv1mc_dynamic_mmap[] = {
+ ARM_MAP_SHARED_RAM_REMOTE_CHIP(1),
+ CSS_SGI_MAP_DEVICE_REMOTE_CHIP(1),
+ SOC_CSS_MAP_DEVICE_REMOTE_CHIP(1),
+#if (CSS_SGI_CHIP_COUNT > 2)
+ ARM_MAP_SHARED_RAM_REMOTE_CHIP(2),
+ CSS_SGI_MAP_DEVICE_REMOTE_CHIP(2),
+ SOC_CSS_MAP_DEVICE_REMOTE_CHIP(2),
+#endif
+#if (CSS_SGI_CHIP_COUNT > 3)
+ ARM_MAP_SHARED_RAM_REMOTE_CHIP(3),
+ CSS_SGI_MAP_DEVICE_REMOTE_CHIP(3),
+ SOC_CSS_MAP_DEVICE_REMOTE_CHIP(3)
+#endif
+};
+
+static struct gic600_multichip_data rdv1mc_multichip_data __init = {
+ .rt_owner_base = PLAT_ARM_GICD_BASE,
+ .rt_owner = 0,
+ .chip_count = CSS_SGI_CHIP_COUNT,
+ .chip_addrs = {
+ PLAT_ARM_GICD_BASE >> 16,
+ (PLAT_ARM_GICD_BASE + CSS_SGI_REMOTE_CHIP_MEM_OFFSET(1)) >> 16,
+#if (CSS_SGI_CHIP_COUNT > 2)
+ (PLAT_ARM_GICD_BASE + CSS_SGI_REMOTE_CHIP_MEM_OFFSET(2)) >> 16,
+#endif
+#if (CSS_SGI_CHIP_COUNT > 3)
+ (PLAT_ARM_GICD_BASE + CSS_SGI_REMOTE_CHIP_MEM_OFFSET(3)) >> 16,
+#endif
+ },
+ .spi_ids = {
+ {32, 255},
+ {0, 0},
+#if (CSS_SGI_CHIP_COUNT > 2)
+ {0, 0},
+#endif
+#if (CSS_SGI_CHIP_COUNT > 3)
+ {0, 0},
+#endif
+ }
+};
+
+static uintptr_t rdv1mc_multichip_gicr_frames[] = {
+ /* Chip 0's GICR Base */
+ PLAT_ARM_GICR_BASE,
+ /* Chip 1's GICR BASE */
+ PLAT_ARM_GICR_BASE + CSS_SGI_REMOTE_CHIP_MEM_OFFSET(1),
+#if (CSS_SGI_CHIP_COUNT > 2)
+ /* Chip 2's GICR BASE */
+ PLAT_ARM_GICR_BASE + CSS_SGI_REMOTE_CHIP_MEM_OFFSET(2),
+#endif
+#if (CSS_SGI_CHIP_COUNT > 3)
+ /* Chip 3's GICR BASE */
+ PLAT_ARM_GICR_BASE + CSS_SGI_REMOTE_CHIP_MEM_OFFSET(3),
+#endif
+ UL(0) /* Zero Termination */
+};
+#endif /* IMAGE_BL31 */
+
+unsigned int plat_arm_sgi_get_platform_id(void)
+{
+ return mmio_read_32(SID_REG_BASE + SID_SYSTEM_ID_OFFSET)
+ & SID_SYSTEM_ID_PART_NUM_MASK;
+}
+
+unsigned int plat_arm_sgi_get_config_id(void)
+{
+ return mmio_read_32(SID_REG_BASE + SID_SYSTEM_CFG_OFFSET);
+}
+
+unsigned int plat_arm_sgi_get_multi_chip_mode(void)
+{
+ return (mmio_read_32(SID_REG_BASE + SID_NODE_ID_OFFSET) &
+ SID_MULTI_CHIP_MODE_MASK) >> SID_MULTI_CHIP_MODE_SHIFT;
+}
+
+/*
+ * bl31_platform_setup_function is guarded by IMAGE_BL31 macro because
+ * PLAT_XLAT_TABLES_DYNAMIC macro is set to build only for BL31 and not
+ * for other stages.
+ */
+#if defined(IMAGE_BL31)
+void bl31_platform_setup(void)
+{
+ int ret;
+ unsigned int i;
+
+ if ((plat_arm_sgi_get_multi_chip_mode() == 0) &&
+ (CSS_SGI_CHIP_COUNT > 1)) {
+ ERROR("Chip Count is set to %u but multi-chip mode is not "
+ "enabled\n", CSS_SGI_CHIP_COUNT);
+ panic();
+ } else if ((plat_arm_sgi_get_multi_chip_mode() == 1) &&
+ (CSS_SGI_CHIP_COUNT > 1)) {
+ INFO("Enabling support for multi-chip in RD-V1-MC\n");
+
+ for (i = 0; i < ARRAY_SIZE(rdv1mc_dynamic_mmap); i++) {
+ ret = mmap_add_dynamic_region(
+ rdv1mc_dynamic_mmap[i].base_pa,
+ rdv1mc_dynamic_mmap[i].base_va,
+ rdv1mc_dynamic_mmap[i].size,
+ rdv1mc_dynamic_mmap[i].attr);
+ if (ret != 0) {
+ ERROR("Failed to add dynamic mmap entry "
+ "(ret=%d)\n", ret);
+ panic();
+ }
+ }
+
+ plat_arm_override_gicr_frames(
+ rdv1mc_multichip_gicr_frames);
+ gic600_multichip_init(&rdv1mc_multichip_data);
+ }
+
+ sgi_bl31_common_platform_setup();
+}
+#endif /* IMAGE_BL31 */