Merge "style(scmi_common): add \n to warning messages" into integration
diff --git a/Makefile b/Makefile
index 017fc65..c290c8c 100644
--- a/Makefile
+++ b/Makefile
@@ -334,7 +334,7 @@
# General warnings
WARNINGS := -Wall -Wmissing-include-dirs -Wunused \
- -Wdisabled-optimization -Wvla -Wshadow \
+ -Wdisabled-optimization -Wvla -Wshadow \
-Wno-unused-parameter -Wredundant-decls
# Additional warnings
diff --git a/docs/about/maintainers.rst b/docs/about/maintainers.rst
index 9cb5aa7..df73331 100644
--- a/docs/about/maintainers.rst
+++ b/docs/about/maintainers.rst
@@ -449,8 +449,8 @@
MediaTek platform ports
^^^^^^^^^^^^^^^^^^^^^^^
-:|M|: Yidi Lin (林以廸) <yidi.lin@mediatek.com>
-:|G|: `mtk09422`_
+:|M|: Rex-BC Chen <rex-bc.chen@mediatek.com>
+:|G|: `mtk-rex-bc-chen`_
:|F|: plat/mediatek/
Marvell platform ports and SoC drivers
@@ -717,7 +717,7 @@
.. _michalsimek: https://github.com/michalsimek
.. _mmind: https://github.com/mmind
.. _MrVan: https://github.com/MrVan
-.. _mtk09422: https://github.com/mtk09422
+.. _mtk-rex-bc-chen: https://github.com/mtk-rex-bc-chen
.. _niej: https://github.com/niej
.. _npoushin: https://github.com/npoushin
.. _prabhakarlad: https://github.com/prabhakarlad
diff --git a/docs/design/cpu-specific-build-macros.rst b/docs/design/cpu-specific-build-macros.rst
index 58b0572..fc853f3 100644
--- a/docs/design/cpu-specific-build-macros.rst
+++ b/docs/design/cpu-specific-build-macros.rst
@@ -275,6 +275,9 @@
CPU. This needs to be enabled for revisions r1p0 and r1p1, r0p0 has the same
issue but there is no workaround for that revision.
+- ``ERRATA_A78_1821534``: This applies errata 1821534 workaround to Cortex-A78
+ CPU. This needs to be enabled for revisions r0p0 and r1p0.
+
For Neoverse N1, the following errata build flags are defined :
- ``ERRATA_N1_1073348``: This applies errata 1073348 workaround to Neoverse-N1
diff --git a/docs/getting_started/prerequisites.rst b/docs/getting_started/prerequisites.rst
index 7eea22f..aa1ae67 100644
--- a/docs/getting_started/prerequisites.rst
+++ b/docs/getting_started/prerequisites.rst
@@ -112,7 +112,7 @@
----------------
TF-A has been tested with pre-built binaries and file systems from `Linaro
-Release 19.06`_. Alternatively, you can build the binaries from source using
+Release 20.01`_. Alternatively, you can build the binaries from source using
instructions in :ref:`Performing an Initial Build`.
.. _prerequisites_get_source:
@@ -166,4 +166,4 @@
.. _Linaro Release Notes: https://community.arm.com/dev-platforms/w/docs/226/old-release-notes
.. _Linaro instructions: https://community.arm.com/dev-platforms/w/docs/304/arm-reference-platforms-deliverables
.. _Development Studio 5 (DS-5): https://developer.arm.com/products/software-development-tools/ds-5-development-studio
-.. _Linaro Release 19.06: http://releases.linaro.org/members/arm/platforms/19.06
+.. _Linaro Release 20.01: http://releases.linaro.org/members/arm/platforms/20.01
diff --git a/docs/license.rst b/docs/license.rst
index f0caa39..80f1118 100644
--- a/docs/license.rst
+++ b/docs/license.rst
@@ -81,6 +81,7 @@
terms of the MIT license. These files are:
- ``include/dt-bindings/interrupt-controller/arm-gic.h``
+ - ``include/dt-bindings/interrupt-controller/irq.h``
See the original `Linux MIT license`_.
diff --git a/docs/plat/arm/fvp/index.rst b/docs/plat/arm/fvp/index.rst
index fb38d91..8e46083 100644
--- a/docs/plat/arm/fvp/index.rst
+++ b/docs/plat/arm/fvp/index.rst
@@ -101,7 +101,7 @@
the models. The models can be launched with ``-Q 100`` option if they are
required to match the run time characteristics of the older versions.
-All the above platforms have been tested with `Linaro Release 19.06`_.
+All the above platforms have been tested with `Linaro Release 20.01`_.
.. _build_options_arm_fvp_platform:
@@ -649,5 +649,5 @@
.. _TB_FW_CONFIG for FVP: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts
.. _Arm's website: `FVP models`_
.. _FVP models: https://developer.arm.com/products/system-design/fixed-virtual-platforms
-.. _Linaro Release 19.06: http://releases.linaro.org/members/arm/platforms/19.06
+.. _Linaro Release 20.01: http://releases.linaro.org/members/arm/platforms/20.01
.. _Arm FVP website: https://developer.arm.com/products/system-design/fixed-virtual-platforms
diff --git a/docs/plat/imx8m.rst b/docs/plat/imx8m.rst
index 0408730..0fe15c9 100644
--- a/docs/plat/imx8m.rst
+++ b/docs/plat/imx8m.rst
@@ -6,6 +6,9 @@
reliability and embedded security needed to drive the growth of fast-growing
edge node computing, streaming multimedia, and machine learning applications.
+imx8mq is dropped in TF-A CI build due to the small OCRAM size, but still actively
+maintained in NXP official release.
+
Boot Sequence
-------------
diff --git a/drivers/arm/gic/v3/gicv3_helpers.c b/drivers/arm/gic/v3/gicv3_helpers.c
index 6bb66a0..a0f44e9 100644
--- a/drivers/arm/gic/v3/gicv3_helpers.c
+++ b/drivers/arm/gic/v3/gicv3_helpers.c
@@ -92,6 +92,47 @@
}
/*******************************************************************************
+ * Helper function to get the maximum SPI INTID + 1.
+ ******************************************************************************/
+unsigned int gicv3_get_spi_limit(uintptr_t gicd_base)
+{
+ unsigned int spi_limit;
+ unsigned int typer_reg = gicd_read_typer(gicd_base);
+
+ /* (maximum SPI INTID + 1) is equal to 32 * (GICD_TYPER.ITLinesNumber+1) */
+ spi_limit = ((typer_reg & TYPER_IT_LINES_NO_MASK) + 1U) << 5;
+
+ /* Filter out special INTIDs 1020-1023 */
+ if (spi_limit > (MAX_SPI_ID + 1U)) {
+ return MAX_SPI_ID + 1U;
+ }
+
+ return spi_limit;
+}
+
+#if GIC_EXT_INTID
+/*******************************************************************************
+ * Helper function to get the maximum ESPI INTID + 1.
+ ******************************************************************************/
+unsigned int gicv3_get_espi_limit(uintptr_t gicd_base)
+{
+ unsigned int typer_reg = gicd_read_typer(gicd_base);
+
+ /* Check if extended SPI range is implemented */
+ if ((typer_reg & TYPER_ESPI) != 0U) {
+ /*
+ * (maximum ESPI INTID + 1) is equal to
+ * 32 * (GICD_TYPER.ESPI_range + 1) + 4096
+ */
+ return ((((typer_reg >> TYPER_ESPI_RANGE_SHIFT) &
+ TYPER_ESPI_RANGE_MASK) + 1U) << 5) + MIN_ESPI_ID;
+ }
+
+ return 0U;
+}
+#endif /* GIC_EXT_INTID */
+
+/*******************************************************************************
* Helper function to configure the default attributes of (E)SPIs.
******************************************************************************/
void gicv3_spis_config_defaults(uintptr_t gicd_base)
@@ -100,19 +141,8 @@
#if GIC_EXT_INTID
unsigned int num_eints;
#endif
- unsigned int typer_reg = gicd_read_typer(gicd_base);
- /* Maximum SPI INTID is 32 * (GICD_TYPER.ITLinesNumber + 1) - 1 */
- num_ints = ((typer_reg & TYPER_IT_LINES_NO_MASK) + 1U) << 5;
-
- /*
- * The GICv3 architecture allows GICD_TYPER.ITLinesNumber to be 31, so
- * the maximum possible value for num_ints is 1024. Limit the value to
- * MAX_SPI_ID + 1 to avoid getting wrong address in GICD_OFFSET() macro.
- */
- if (num_ints > MAX_SPI_ID + 1U) {
- num_ints = MAX_SPI_ID + 1U;
- }
+ num_ints = gicv3_get_spi_limit(gicd_base);
INFO("Maximum SPI INTID supported: %u\n", num_ints - 1);
/* Treat all (E)SPIs as G1NS by default. We do 32 at a time. */
@@ -121,13 +151,8 @@
}
#if GIC_EXT_INTID
- /* Check if extended SPI range is implemented */
- if ((typer_reg & TYPER_ESPI) != 0U) {
- /*
- * Maximum ESPI INTID is 32 * (GICD_TYPER.ESPI_range + 1) + 4095
- */
- num_eints = ((((typer_reg >> TYPER_ESPI_RANGE_SHIFT) &
- TYPER_ESPI_RANGE_MASK) + 1U) << 5) + MIN_ESPI_ID;
+ num_eints = gicv3_get_espi_limit(gicd_base);
+ if (num_eints != 0U) {
INFO("Maximum ESPI INTID supported: %u\n", num_eints - 1);
for (i = MIN_ESPI_ID; i < num_eints;
@@ -135,7 +160,6 @@
gicd_write_igroupr(gicd_base, i, ~0U);
}
} else {
- num_eints = 0U;
INFO("ESPI range is not implemented.\n");
}
#endif
diff --git a/drivers/arm/gic/v3/gicv3_main.c b/drivers/arm/gic/v3/gicv3_main.c
index 5a49b4f..668416c 100644
--- a/drivers/arm/gic/v3/gicv3_main.c
+++ b/drivers/arm/gic/v3/gicv3_main.c
@@ -728,40 +728,17 @@
*****************************************************************************/
void gicv3_distif_save(gicv3_dist_ctx_t * const dist_ctx)
{
- unsigned int typer_reg, num_ints;
-#if GIC_EXT_INTID
- unsigned int num_eints;
-#endif
-
assert(gicv3_driver_data != NULL);
assert(gicv3_driver_data->gicd_base != 0U);
assert(IS_IN_EL3());
assert(dist_ctx != NULL);
uintptr_t gicd_base = gicv3_driver_data->gicd_base;
-
- typer_reg = gicd_read_typer(gicd_base);
-
- /* Maximum SPI INTID is 32 * (GICD_TYPER.ITLinesNumber + 1) - 1 */
- num_ints = ((typer_reg & TYPER_IT_LINES_NO_MASK) + 1U) << 5;
-
- /* Filter out special INTIDs 1020-1023 */
- if (num_ints > (MAX_SPI_ID + 1U)) {
- num_ints = MAX_SPI_ID + 1U;
- }
-
+ unsigned int num_ints = gicv3_get_spi_limit(gicd_base);
#if GIC_EXT_INTID
- /* Check if extended SPI range is implemented */
- if ((typer_reg & TYPER_ESPI) != 0U) {
- /*
- * Maximum ESPI INTID is 32 * (GICD_TYPER.ESPI_range + 1) + 4095
- */
- num_eints = ((((typer_reg >> TYPER_ESPI_RANGE_SHIFT) &
- TYPER_ESPI_RANGE_MASK) + 1U) << 5) + MIN_ESPI_ID;
- } else {
- num_eints = 0U;
- }
+ unsigned int num_eints = gicv3_get_espi_limit(gicd_base);
#endif
+
/* Wait for pending write to complete */
gicd_wait_for_pending_write(gicd_base);
@@ -838,11 +815,6 @@
*****************************************************************************/
void gicv3_distif_init_restore(const gicv3_dist_ctx_t * const dist_ctx)
{
- unsigned int typer_reg, num_ints;
-#if GIC_EXT_INTID
- unsigned int num_eints;
-#endif
-
assert(gicv3_driver_data != NULL);
assert(gicv3_driver_data->gicd_base != 0U);
assert(IS_IN_EL3());
@@ -864,27 +836,9 @@
/* Set the ARE_S and ARE_NS bit now that interrupts have been disabled */
gicd_set_ctlr(gicd_base, CTLR_ARE_S_BIT | CTLR_ARE_NS_BIT, RWP_TRUE);
- typer_reg = gicd_read_typer(gicd_base);
-
- /* Maximum SPI INTID is 32 * (GICD_TYPER.ITLinesNumber + 1) - 1 */
- num_ints = ((typer_reg & TYPER_IT_LINES_NO_MASK) + 1U) << 5;
-
- /* Filter out special INTIDs 1020-1023 */
- if (num_ints > (MAX_SPI_ID + 1U)) {
- num_ints = MAX_SPI_ID + 1U;
- }
-
+ unsigned int num_ints = gicv3_get_spi_limit(gicd_base);
#if GIC_EXT_INTID
- /* Check if extended SPI range is implemented */
- if ((typer_reg & TYPER_ESPI) != 0U) {
- /*
- * Maximum ESPI INTID is 32 * (GICD_TYPER.ESPI_range + 1) + 4095
- */
- num_eints = ((((typer_reg >> TYPER_ESPI_RANGE_SHIFT) &
- TYPER_ESPI_RANGE_MASK) + 1U) << 5) + MIN_ESPI_ID;
- } else {
- num_eints = 0U;
- }
+ unsigned int num_eints = gicv3_get_espi_limit(gicd_base);
#endif
/* Restore GICD_IGROUPR for INTIDs 32 - 1019 */
RESTORE_GICD_REGS(gicd_base, dist_ctx, num_ints, igroupr, IGROUP);
diff --git a/drivers/arm/gic/v3/gicv3_private.h b/drivers/arm/gic/v3/gicv3_private.h
index 416cdd0..93ee1a1 100644
--- a/drivers/arm/gic/v3/gicv3_private.h
+++ b/drivers/arm/gic/v3/gicv3_private.h
@@ -233,6 +233,8 @@
/*******************************************************************************
* Private GICv3 helper function prototypes
******************************************************************************/
+unsigned int gicv3_get_spi_limit(uintptr_t gicd_base);
+unsigned int gicv3_get_espi_limit(uintptr_t gicd_base);
void gicv3_spis_config_defaults(uintptr_t gicd_base);
void gicv3_ppi_sgi_config_defaults(uintptr_t gicr_base);
unsigned int gicv3_secure_ppi_sgi_config_props(uintptr_t gicr_base,
diff --git a/drivers/st/io/io_stm32image.c b/drivers/st/io/io_stm32image.c
index 3e377cd..9fa0c50 100644
--- a/drivers/st/io/io_stm32image.c
+++ b/drivers/st/io/io_stm32image.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -246,10 +246,11 @@
static int stm32image_partition_read(io_entity_t *entity, uintptr_t buffer,
size_t length, size_t *length_read)
{
- int result;
+ int result = -EINVAL;
uint8_t *local_buffer;
boot_api_image_header_t *header =
(boot_api_image_header_t *)first_lba_buffer;
+ size_t hdr_sz = sizeof(boot_api_image_header_t);
assert(entity != NULL);
assert(buffer != 0U);
@@ -286,16 +287,13 @@
}
/* Part of image already loaded with the header */
- memcpy(local_buffer, (uint8_t *)first_lba_buffer +
- sizeof(boot_api_image_header_t),
- MAX_LBA_SIZE - sizeof(boot_api_image_header_t));
- local_buffer += MAX_LBA_SIZE - sizeof(boot_api_image_header_t);
+ memcpy(local_buffer, (uint8_t *)first_lba_buffer + hdr_sz,
+ MAX_LBA_SIZE - hdr_sz);
+ local_buffer += MAX_LBA_SIZE - hdr_sz;
offset = MAX_LBA_SIZE;
/* New image length to be read */
- local_length = round_up(length -
- ((MAX_LBA_SIZE) -
- sizeof(boot_api_image_header_t)),
+ local_length = round_up(length - ((MAX_LBA_SIZE) - hdr_sz),
stm32image_dev.lba_size);
if ((header->load_address != 0U) &&
@@ -326,7 +324,7 @@
local_length, length_read);
/* Adding part of size already read from header */
- *length_read += MAX_LBA_SIZE - sizeof(boot_api_image_header_t);
+ *length_read += MAX_LBA_SIZE - hdr_sz;
if (result != 0) {
ERROR("%s: io_read (%i)\n", __func__, result);
@@ -348,6 +346,9 @@
return result;
}
+ inv_dcache_range(round_up((uintptr_t)(local_buffer + length - hdr_sz),
+ CACHE_WRITEBACK_GRANULE), *length_read - length + hdr_sz);
+
io_close(backend_handle);
}
diff --git a/fdts/morello-fvp.dts b/fdts/morello-fvp.dts
index 4f6c8a7..55c87bf 100644
--- a/fdts/morello-fvp.dts
+++ b/fdts/morello-fvp.dts
@@ -27,33 +27,52 @@
cpus {
#address-cells = <2>;
#size-cells = <0>;
- cpu0@0 {
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&CPU2>;
+ };
+ core1 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+ CPU0: cpu0@0 {
compatible = "arm,armv8";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
clocks = <&scmi_dvfs 0>;
};
- cpu1@100 {
+ CPU1: cpu1@100 {
compatible = "arm,armv8";
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
clocks = <&scmi_dvfs 0>;
};
- cpu2@10000 {
+ CPU2: cpu2@10000 {
compatible = "arm,armv8";
reg = <0x0 0x10000>;
device_type = "cpu";
enable-method = "psci";
- clocks = <&scmi_dvfs 0>;
+ clocks = <&scmi_dvfs 1>;
};
- cpu3@10100 {
+ CPU3: cpu3@10100 {
compatible = "arm,armv8";
reg = <0x0 0x10100>;
device_type = "cpu";
enable-method = "psci";
- clocks = <&scmi_dvfs 0>;
+ clocks = <&scmi_dvfs 1>;
};
};
diff --git a/fdts/tc0.dts b/fdts/tc0.dts
index a4f7a4d..c17b0b3 100644
--- a/fdts/tc0.dts
+++ b/fdts/tc0.dts
@@ -17,6 +17,7 @@
};
chosen {
+ bootargs = "console=ttyAMA0 debug user_debug=31 earlycon=pl011,0x7ff80000 loglevel=9 androidboot.hardware=total_compute androidboot.boot_devices=1c050000.mmci ip=dhcp androidboot.selinux=permissive allow_mismatched_32bit_el0";
stdout-path = "serial0:115200n8";
};
diff --git a/include/arch/aarch64/arch.h b/include/arch/aarch64/arch.h
index b86a13e..9ef9c26 100644
--- a/include/arch/aarch64/arch.h
+++ b/include/arch/aarch64/arch.h
@@ -434,8 +434,16 @@
#define SCR_RESET_VAL SCR_RES1_BITS
/* MDCR_EL3 definitions */
+#define MDCR_EnPMSN_BIT (ULL(1) << 36)
+#define MDCR_MPMX_BIT (ULL(1) << 35)
+#define MDCR_MCCD_BIT (ULL(1) << 34)
#define MDCR_MTPME_BIT (ULL(1) << 28)
+#define MDCR_TDCC_BIT (ULL(1) << 27)
#define MDCR_SCCD_BIT (ULL(1) << 23)
+#define MDCR_EPMAD_BIT (ULL(1) << 21)
+#define MDCR_EDAD_BIT (ULL(1) << 20)
+#define MDCR_TTRF_BIT (ULL(1) << 19)
+#define MDCR_STE_BIT (ULL(1) << 18)
#define MDCR_SPME_BIT (ULL(1) << 17)
#define MDCR_SDD_BIT (ULL(1) << 16)
#define MDCR_SPD32(x) ((x) << 14)
diff --git a/include/arch/aarch64/el3_common_macros.S b/include/arch/aarch64/el3_common_macros.S
index f759983..b610b37 100644
--- a/include/arch/aarch64/el3_common_macros.S
+++ b/include/arch/aarch64/el3_common_macros.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -113,8 +113,13 @@
*
* MDCR_EL3.SCCD: Set to one so that cycle counting by PMCCNTR_EL0 is
* prohibited in Secure state. This bit is RES0 in versions of the
- * architecture earlier than ARMv8.5, setting it to 1 doesn't have any
- * effect on them.
+ * architecture with FEAT_PMUv3p5 not implemented, setting it to 1
+ * doesn't have any effect on them.
+ *
+ * MDCR_EL3.MCCD: Set to one so that cycle counting by PMCCNTR_EL0 is
+ * prohibited in EL3. This bit is RES0 in versions of the
+ * architecture with FEAT_PMUv3p7 not implemented, setting it to 1
+ * doesn't have any effect on them.
*
* MDCR_EL3.SPME: Set to zero so that event counting by the programmable
* counters PMEVCNTR<n>_EL0 is prohibited in Secure state. If ARMv8.2
@@ -124,9 +129,9 @@
* ---------------------------------------------------------------------
*/
mov_imm x0, ((MDCR_EL3_RESET_VAL | MDCR_SDD_BIT | \
- MDCR_SPD32(MDCR_SPD32_DISABLE) | MDCR_SCCD_BIT) & \
- ~(MDCR_SPME_BIT | MDCR_TDOSA_BIT | MDCR_TDA_BIT | \
- MDCR_TPM_BIT))
+ MDCR_SPD32(MDCR_SPD32_DISABLE) | MDCR_SCCD_BIT | \
+ MDCR_MCCD_BIT) & ~(MDCR_SPME_BIT | MDCR_TDOSA_BIT | \
+ MDCR_TDA_BIT | MDCR_TPM_BIT))
msr mdcr_el3, x0
diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h
index fbe07da..803cd9c 100644
--- a/include/dt-bindings/interrupt-controller/arm-gic.h
+++ b/include/dt-bindings/interrupt-controller/arm-gic.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2019-2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2019-2021, Arm Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: MIT
*
@@ -9,21 +9,18 @@
#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
+#include <dt-bindings/interrupt-controller/irq.h>
+
/* interrupt specifier cell 0 */
#define GIC_SPI 0
#define GIC_PPI 1
-#define IRQ_TYPE_NONE 0
-#define IRQ_TYPE_EDGE_RISING 1
-#define IRQ_TYPE_EDGE_FALLING 2
-#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
-#define IRQ_TYPE_LEVEL_HIGH 4
-#define IRQ_TYPE_LEVEL_LOW 8
-
/*
* Interrupt specifier cell 2.
+ * The flags in irq.h are valid, plus those below.
*/
#define GIC_CPU_MASK_RAW(x) ((x) << 8)
+#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
#endif
diff --git a/include/dt-bindings/interrupt-controller/irq.h b/include/dt-bindings/interrupt-controller/irq.h
new file mode 100644
index 0000000..94e7f95
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/irq.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2021, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: MIT
+ *
+ * This header provides constants for most IRQ bindings.
+ *
+ * Most IRQ bindings include a flags cell as part of the IRQ specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+
+#define IRQ_TYPE_NONE 0
+#define IRQ_TYPE_EDGE_RISING 1
+#define IRQ_TYPE_EDGE_FALLING 2
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH 4
+#define IRQ_TYPE_LEVEL_LOW 8
+
+#endif
diff --git a/include/lib/cpus/aarch64/cortex_a78.h b/include/lib/cpus/aarch64/cortex_a78.h
index caa5120..4bc49f3 100644
--- a/include/lib/cpus/aarch64/cortex_a78.h
+++ b/include/lib/cpus/aarch64/cortex_a78.h
@@ -30,6 +30,7 @@
#define CORTEX_A78_ACTLR2_EL1 S3_0_C15_C1_1
#define CORTEX_A78_ACTLR2_EL1_BIT_1 (ULL(1) << 1)
+#define CORTEX_A78_ACTLR2_EL1_BIT_2 (ULL(1) << 2)
/*******************************************************************************
* CPU Activity Monitor Unit register specific definitions.
diff --git a/include/lib/smccc.h b/include/lib/smccc.h
index 470317d..deaeb1d 100644
--- a/include/lib/smccc.h
+++ b/include/lib/smccc.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -51,6 +51,23 @@
FUNCID_OEN_MASK)
/*******************************************************************************
+ * SMCCC_ARCH_SOC_ID SoC version & revision bit definition
+ ******************************************************************************/
+#define SOC_ID_JEP_106_BANK_IDX_MASK GENMASK_32(30, 24)
+#define SOC_ID_JEP_106_BANK_IDX_SHIFT U(24)
+#define SOC_ID_JEP_106_ID_CODE_MASK GENMASK_32(23, 16)
+#define SOC_ID_JEP_106_ID_CODE_SHIFT U(16)
+#define SOC_ID_IMPL_DEF_MASK GENMASK_32(15, 0)
+#define SOC_ID_IMPL_DEF_SHIFT U(0)
+#define SOC_ID_SET_JEP_106(bkid, mfid) ((((bkid) << SOC_ID_JEP_106_BANK_IDX_SHIFT) & \
+ SOC_ID_JEP_106_BANK_IDX_MASK) | \
+ (((mfid) << SOC_ID_JEP_106_ID_CODE_SHIFT) & \
+ SOC_ID_JEP_106_ID_CODE_MASK))
+
+#define SOC_ID_REV_MASK GENMASK_32(30, 0)
+#define SOC_ID_REV_SHIFT U(0)
+
+/*******************************************************************************
* Owning entity number definitions inside the function id as per the SMC
* calling convention
******************************************************************************/
diff --git a/include/plat/arm/common/smccc_def.h b/include/plat/arm/common/smccc_def.h
index 6e698e5..0f4e573 100644
--- a/include/plat/arm/common/smccc_def.h
+++ b/include/plat/arm/common/smccc_def.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -9,7 +9,5 @@
/* Defines used to retrieve ARM SOC revision */
#define ARM_SOC_CONTINUATION_CODE U(0x4)
#define ARM_SOC_IDENTIFICATION_CODE U(0x3B)
-#define ARM_SOC_CONTINUATION_SHIFT U(24)
-#define ARM_SOC_IDENTIFICATION_SHIFT U(16)
#endif /* SMCCC_DEF_H */
diff --git a/include/services/ffa_svc.h b/include/services/ffa_svc.h
index ec75bc9..5b39c42 100644
--- a/include/services/ffa_svc.h
+++ b/include/services/ffa_svc.h
@@ -22,7 +22,7 @@
/* The macros below are used to identify FFA calls from the SMC function ID */
#define FFA_FNUM_MIN_VALUE U(0x60)
-#define FFA_FNUM_MAX_VALUE U(0x84)
+#define FFA_FNUM_MAX_VALUE U(0x85)
#define is_ffa_fid(fid) __extension__ ({ \
__typeof__(fid) _fid = (fid); \
((GET_SMC_NUM(_fid) >= FFA_FNUM_MIN_VALUE) && \
@@ -70,7 +70,7 @@
#define FFA_FNUM_RXTX_MAP U(0x66)
#define FFA_FNUM_RXTX_UNMAP U(0x67)
#define FFA_FNUM_PARTITION_INFO_GET U(0x68)
-#define FFA_FNUM_ID_GET U(0x69)
+#define FFA_FNUM_ID_GET U(0x69)
#define FFA_FNUM_MSG_POLL U(0x6A)
#define FFA_FNUM_MSG_WAIT U(0x6B)
#define FFA_FNUM_MSG_YIELD U(0x6C)
@@ -86,6 +86,7 @@
#define FFA_FNUM_MEM_RELINQUISH U(0x76)
#define FFA_FNUM_MEM_RECLAIM U(0x77)
#define FFA_FNUM_SECONDARY_EP_REGISTER U(0x84)
+#define FFA_FNUM_SPM_ID_GET U(0x85)
/* FFA SMC32 FIDs */
#define FFA_ERROR FFA_FID(SMC_32, FFA_FNUM_ERROR)
@@ -115,6 +116,7 @@
#define FFA_MEM_RETRIEVE_RESP FFA_FID(SMC_32, FFA_FNUM_MEM_RETRIEVE_RESP)
#define FFA_MEM_RELINQUISH FFA_FID(SMC_32, FFA_FNUM_MEM_RELINQUISH)
#define FFA_MEM_RECLAIM FFA_FID(SMC_32, FFA_FNUM_MEM_RECLAIM)
+#define FFA_SPM_ID_GET FFA_FID(SMC_32, FFA_FNUM_SPM_ID_GET)
/* FFA SMC64 FIDs */
#define FFA_ERROR_SMC64 FFA_FID(SMC_64, FFA_FNUM_ERROR)
diff --git a/lib/cpus/aarch64/cortex_a78.S b/lib/cpus/aarch64/cortex_a78.S
index f61726b..8c5a45a 100644
--- a/lib/cpus/aarch64/cortex_a78.S
+++ b/lib/cpus/aarch64/cortex_a78.S
@@ -44,13 +44,13 @@
b cpu_rev_var_ls
endfunc check_errata_1688305
- /* --------------------------------------------------
- * Errata Workaround for Cortex A78 Errata #1941498.
- * This applies to revisions r0p0, r1p0, and r1p1.
- * x0: variant[4:7] and revision[0:3] of current cpu.
- * Shall clobber: x0-x17
- * --------------------------------------------------
- */
+/* --------------------------------------------------
+ * Errata Workaround for Cortex A78 Errata #1941498.
+ * This applies to revisions r0p0, r1p0, and r1p1.
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x17
+ * --------------------------------------------------
+ */
func errata_a78_1941498_wa
/* Compare x0 against revision <= r1p1 */
mov x17, x30
@@ -72,16 +72,16 @@
b cpu_rev_var_ls
endfunc check_errata_1941498
- /* --------------------------------------------------
- * Errata Workaround for A78 Erratum 1951500.
- * This applies to revisions r1p0 and r1p1 of A78.
- * The issue also exists in r0p0 but there is no fix
- * in that revision.
- * Inputs:
- * x0: variant[4:7] and revision[0:3] of current cpu.
- * Shall clobber: x0-x17
- * --------------------------------------------------
- */
+/* --------------------------------------------------
+ * Errata Workaround for A78 Erratum 1951500.
+ * This applies to revisions r1p0 and r1p1 of A78.
+ * The issue also exists in r0p0 but there is no fix
+ * in that revision.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x17
+ * --------------------------------------------------
+ */
func errata_a78_1951500_wa
/* Compare x0 against revisions r1p0 - r1p1 */
mov x17, x30
@@ -126,6 +126,34 @@
b cpu_rev_var_range
endfunc check_errata_1951500
+/* --------------------------------------------------
+ * Errata Workaround for Cortex A78 Errata #1821534.
+ * This applies to revisions r0p0 and r1p0.
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x17
+ * --------------------------------------------------
+ */
+func errata_a78_1821534_wa
+ /* Check revision. */
+ mov x17, x30
+ bl check_errata_1821534
+ cbz x0, 1f
+
+ /* Set bit 2 in ACTLR2_EL1 */
+ mrs x1, CORTEX_A78_ACTLR2_EL1
+ orr x1, x1, #CORTEX_A78_ACTLR2_EL1_BIT_2
+ msr CORTEX_A78_ACTLR2_EL1, x1
+ isb
+1:
+ ret x17
+endfunc errata_a78_1821534_wa
+
+func check_errata_1821534
+ /* Applies to r0p0 and r1p0 */
+ mov x1, #0x10
+ b cpu_rev_var_ls
+endfunc check_errata_1821534
+
/* -------------------------------------------------
* The CPU Ops reset function for Cortex-A78
* -------------------------------------------------
@@ -150,6 +178,11 @@
bl errata_a78_1951500_wa
#endif
+#if ERRATA_A78_1821534
+ mov x0, x18
+ bl errata_a78_1821534_wa
+#endif
+
#if ENABLE_AMU
/* Make sure accesses from EL0/EL1 and EL2 are not trapped to EL3 */
mrs x0, actlr_el3
@@ -207,6 +240,7 @@
report_errata ERRATA_A78_1688305, cortex_a78, 1688305
report_errata ERRATA_A78_1941498, cortex_a78, 1941498
report_errata ERRATA_A78_1951500, cortex_a78, 1951500
+ report_errata ERRATA_A78_1821534, cortex_a78, 1821534
ldp x8, x30, [sp], #16
ret
diff --git a/lib/cpus/cpu-ops.mk b/lib/cpus/cpu-ops.mk
index fb33346..541a2a2 100644
--- a/lib/cpus/cpu-ops.mk
+++ b/lib/cpus/cpu-ops.mk
@@ -307,6 +307,10 @@
# well but there is no workaround for that revision.
ERRATA_A78_1951500 ?=0
+# Flag to apply erratum 1821534 workaround during reset. This erratum applies
+# to revisions r0p0 and r1p0 of the A78 cpu.
+ERRATA_A78_1821534 ?=0
+
# Flag to apply T32 CLREX workaround during reset. This erratum applies
# only to r0p0 and r1p0 of the Neoverse N1 cpu.
ERRATA_N1_1043202 ?=0
@@ -605,6 +609,10 @@
$(eval $(call assert_boolean,ERRATA_A78_1951500))
$(eval $(call add_define,ERRATA_A78_1951500))
+# Process ERRATA_A78_1821534 flag
+$(eval $(call assert_boolean,ERRATA_A78_1821534))
+$(eval $(call add_define,ERRATA_A78_1821534))
+
# Process ERRATA_N1_1043202 flag
$(eval $(call assert_boolean,ERRATA_N1_1043202))
$(eval $(call add_define,ERRATA_N1_1043202))
diff --git a/lib/el3_runtime/aarch64/context.S b/lib/el3_runtime/aarch64/context.S
index 7daf30d..0ec9ffd 100644
--- a/lib/el3_runtime/aarch64/context.S
+++ b/lib/el3_runtime/aarch64/context.S
@@ -697,13 +697,14 @@
str x18, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_SP_EL0]
/* ----------------------------------------------------------
- * Check if earlier initialization MDCR_EL3.SCCD to 1 failed,
- * meaning that ARMv8-PMU is not implemented and PMCR_EL0
- * should be saved in non-secure context.
+ * Check if earlier initialization MDCR_EL3.SCCD/MCCD to 1
+ * failed, meaning that FEAT_PMUv3p5/7 is not implemented and
+ * PMCR_EL0 should be saved in non-secure context.
* ----------------------------------------------------------
*/
+ mov_imm x10, (MDCR_SCCD_BIT | MDCR_MCCD_BIT)
mrs x9, mdcr_el3
- tst x9, #MDCR_SCCD_BIT
+ tst x9, x10
bne 1f
/* Secure Cycle Counter is not disabled */
@@ -792,13 +793,14 @@
/* ----------------------------------------------------------
* Back to Non-secure state.
- * Check if earlier initialization MDCR_EL3.SCCD to 1 failed,
- * meaning that ARMv8-PMU is not implemented and PMCR_EL0
- * should be restored from non-secure context.
+ * Check if earlier initialization MDCR_EL3.SCCD/MCCD to 1
+ * failed, meaning that FEAT_PMUv3p5/7 is not implemented and
+ * PMCR_EL0 should be restored from non-secure context.
* ----------------------------------------------------------
*/
+ mov_imm x1, (MDCR_SCCD_BIT | MDCR_MCCD_BIT)
mrs x0, mdcr_el3
- tst x0, #MDCR_SCCD_BIT
+ tst x0, x1
bne 2f
ldr x0, [sp, #CTX_EL3STATE_OFFSET + CTX_PMCR_EL0]
msr pmcr_el0, x0
diff --git a/package-lock.json b/package-lock.json
index 4967107..46d8bf3 100644
--- a/package-lock.json
+++ b/package-lock.json
@@ -1922,9 +1922,9 @@
}
},
"trim-newlines": {
- "version": "3.0.0",
- "resolved": "https://registry.npmjs.org/trim-newlines/-/trim-newlines-3.0.0.tgz",
- "integrity": "sha512-C4+gOpvmxaSMKuEf9Qc134F1ZuOHVXKRbtEflf4NTtuuJDEIJ9p5PXsalL8SkeRw+qit1Mo+yuvMPAKwWg/1hA==",
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/trim-newlines/-/trim-newlines-3.0.1.tgz",
+ "integrity": "sha512-c1PTsA3tYrIsLGkJkzHF+w9F2EyxfXGo4UyJc4pFL++FMjnq0HJS69T3M7d//gKrFKwy429bouPescbjecU+Zw==",
"dev": true
},
"trim-off-newlines": {
diff --git a/plat/arm/board/fvp/fvp_common.c b/plat/arm/board/fvp/fvp_common.c
index 52686fa..fe0903b 100644
--- a/plat/arm/board/fvp/fvp_common.c
+++ b/plat/arm/board/fvp/fvp_common.c
@@ -483,9 +483,9 @@
int32_t plat_get_soc_version(void)
{
return (int32_t)
- ((ARM_SOC_IDENTIFICATION_CODE << ARM_SOC_IDENTIFICATION_SHIFT)
- | (ARM_SOC_CONTINUATION_CODE << ARM_SOC_CONTINUATION_SHIFT)
- | FVP_SOC_ID);
+ (SOC_ID_SET_JEP_106(ARM_SOC_CONTINUATION_CODE,
+ ARM_SOC_IDENTIFICATION_CODE) |
+ (FVP_SOC_ID & SOC_ID_IMPL_DEF_MASK));
}
/* Get SOC revision */
@@ -494,6 +494,6 @@
unsigned int sys_id;
sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID);
- return (int32_t)((sys_id >> V2M_SYS_ID_REV_SHIFT) &
- V2M_SYS_ID_REV_MASK);
+ return (int32_t)(((sys_id >> V2M_SYS_ID_REV_SHIFT) &
+ V2M_SYS_ID_REV_MASK) & SOC_ID_REV_MASK);
}
diff --git a/plat/arm/board/juno/juno_common.c b/plat/arm/board/juno/juno_common.c
index cb183d5..038f604 100644
--- a/plat/arm/board/juno/juno_common.c
+++ b/plat/arm/board/juno/juno_common.c
@@ -118,9 +118,9 @@
int32_t plat_get_soc_version(void)
{
return (int32_t)
- ((ARM_SOC_IDENTIFICATION_CODE << ARM_SOC_IDENTIFICATION_SHIFT)
- | (ARM_SOC_CONTINUATION_CODE << ARM_SOC_CONTINUATION_SHIFT)
- | JUNO_SOC_ID);
+ (SOC_ID_SET_JEP_106(ARM_SOC_CONTINUATION_CODE,
+ ARM_SOC_IDENTIFICATION_CODE) |
+ (JUNO_SOC_ID & SOC_ID_IMPL_DEF_MASK));
}
/* Get SOC revision */
@@ -129,6 +129,6 @@
unsigned int sys_id;
sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID);
- return (int32_t)((sys_id >> V2M_SYS_ID_REV_SHIFT) &
- V2M_SYS_ID_REV_MASK);
+ return (int32_t)(((sys_id >> V2M_SYS_ID_REV_SHIFT) &
+ V2M_SYS_ID_REV_MASK) & SOC_ID_REV_MASK);
}
diff --git a/plat/imx/imx8m/imx8m_psci_common.c b/plat/imx/imx8m/imx8m_psci_common.c
index dbb772d..9dfd311 100644
--- a/plat/imx/imx8m/imx8m_psci_common.c
+++ b/plat/imx/imx8m/imx8m_psci_common.c
@@ -152,19 +152,45 @@
req_state->pwr_domain_state[i] = PLAT_STOP_OFF_STATE;
}
-void __dead2 imx_system_reset(void)
+static void __dead2 imx_wdog_restart(bool external_reset)
{
uintptr_t wdog_base = IMX_WDOG_BASE;
unsigned int val;
- /* WDOG_B reset */
val = mmio_read_16(wdog_base);
-#ifdef IMX_WDOG_B_RESET
- val = (val & 0x00FF) | WDOG_WCR_WDZST | WDOG_WCR_WDE |
- WDOG_WCR_WDT | WDOG_WCR_SRS;
-#else
- val = (val & 0x00FF) | WDOG_WCR_WDZST | WDOG_WCR_SRS;
-#endif
+ /*
+ * Common watchdog init flags, for additional details check
+ * 6.6.4.1 Watchdog Control Register (WDOGx_WCR)
+ *
+ * Initial bit selection:
+ * WDOG_WCR_WDE - Enable the watchdog.
+ *
+ * 0x000E mask is used to keep previous values (that could be set
+ * in SPL) of WDBG and WDE/WDT (both are write-one once-only bits).
+ */
+ val = (val & 0x000E) | WDOG_WCR_WDE;
+ if (external_reset) {
+ /*
+ * To assert WDOG_B (external reset) we have
+ * to set WDA bit 0 (already set in previous step).
+ * SRS bits are required to be set to 1 (no effect on the
+ * system).
+ */
+ val |= WDOG_WCR_SRS;
+ } else {
+ /*
+ * To assert Software Reset Signal (internal reset) we have
+ * to set SRS bit to 0 (already set in previous step).
+ * SRE bit is required to be set to 1 when used in
+ * conjunction with the Software Reset Signal before
+ * SRS asserton, otherwise SRS bit will just automatically
+ * reset to 1.
+ *
+ * Also we set WDA to 1 (no effect on system).
+ */
+ val |= WDOG_WCR_SRE | WDOG_WCR_WDA;
+ }
+
mmio_write_16(wdog_base, val);
mmio_write_16(wdog_base + WDOG_WSR, 0x5555);
@@ -173,6 +199,27 @@
;
}
+void __dead2 imx_system_reset(void)
+{
+#ifdef IMX_WDOG_B_RESET
+ imx_wdog_restart(true);
+#else
+ imx_wdog_restart(false);
+#endif
+}
+
+int imx_system_reset2(int is_vendor, int reset_type, u_register_t cookie)
+{
+ imx_wdog_restart(false);
+
+ /*
+ * imx_wdog_restart cannot return (as it's a __dead function),
+ * however imx_system_reset2 has to return some value according
+ * to PSCI v1.1 spec.
+ */
+ return 0;
+}
+
void __dead2 imx_system_off(void)
{
mmio_write_32(IMX_SNVS_BASE + SNVS_LPCR, SNVS_LPCR_SRTC_ENV |
diff --git a/plat/imx/imx8m/imx8mm/imx8mm_psci.c b/plat/imx/imx8m/imx8mm/imx8mm_psci.c
index e558724..815d3a2 100644
--- a/plat/imx/imx8m/imx8mm/imx8mm_psci.c
+++ b/plat/imx/imx8m/imx8mm/imx8mm_psci.c
@@ -28,6 +28,7 @@
.pwr_domain_pwr_down_wfi = imx_pwr_domain_pwr_down_wfi,
.get_sys_suspend_power_state = imx_get_sys_suspend_power_state,
.system_reset = imx_system_reset,
+ .system_reset2 = imx_system_reset2,
.system_off = imx_system_off,
};
diff --git a/plat/imx/imx8m/imx8mn/include/platform_def.h b/plat/imx/imx8m/imx8mn/include/platform_def.h
index 2444e66..9c46d8d 100644
--- a/plat/imx/imx8m/imx8mn/include/platform_def.h
+++ b/plat/imx/imx8m/imx8mn/include/platform_def.h
@@ -34,6 +34,11 @@
#define PLAT_WAIT_RET_STATE U(1)
#define PLAT_STOP_OFF_STATE U(3)
+#define PLAT_PRI_BITS U(3)
+#define PLAT_SDEI_CRITICAL_PRI 0x10
+#define PLAT_SDEI_NORMAL_PRI 0x20
+#define PLAT_SDEI_SGI_PRIVATE U(9)
+
#define BL31_BASE U(0x960000)
#define BL31_LIMIT U(0x980000)
diff --git a/plat/imx/imx8m/imx8mn/platform.mk b/plat/imx/imx8m/imx8mn/platform.mk
index 8c4ad1c..2087089 100644
--- a/plat/imx/imx8m/imx8mn/platform.mk
+++ b/plat/imx/imx8m/imx8mn/platform.mk
@@ -31,6 +31,8 @@
plat/imx/common/imx_sip_handler.c \
plat/imx/common/imx_sip_svc.c \
plat/imx/common/imx_uart_console.S \
+ plat/imx/common/imx_ehf.c \
+ plat/imx/common/imx_sdei.c \
lib/cpus/aarch64/cortex_a53.S \
drivers/arm/tzc/tzc380.c \
drivers/delay_timer/delay_timer.c \
@@ -54,3 +56,6 @@
IMX_BOOT_UART_BASE ?= 0x30890000
$(eval $(call add_define,IMX_BOOT_UART_BASE))
+
+EL3_EXCEPTION_HANDLING := 1
+SDEI_SUPPORT := 1
diff --git a/plat/imx/imx8m/imx8mp/include/platform_def.h b/plat/imx/imx8m/imx8mp/include/platform_def.h
index a5f265d..832bed1 100644
--- a/plat/imx/imx8m/imx8mp/include/platform_def.h
+++ b/plat/imx/imx8m/imx8mp/include/platform_def.h
@@ -34,8 +34,13 @@
#define PLAT_WAIT_RET_STATE U(1)
#define PLAT_STOP_OFF_STATE U(3)
-#define BL31_BASE U(0x970000)
-#define BL31_LIMIT U(0x990000)
+#define BL31_BASE U(0x960000)
+#define BL31_LIMIT U(0x980000)
+
+#define PLAT_PRI_BITS U(3)
+#define PLAT_SDEI_CRITICAL_PRI 0x10
+#define PLAT_SDEI_NORMAL_PRI 0x20
+#define PLAT_SDEI_SGI_PRIVATE U(9)
/* non-secure uboot base */
#define PLAT_NS_IMAGE_OFFSET U(0x40200000)
diff --git a/plat/imx/imx8m/imx8mp/platform.mk b/plat/imx/imx8m/imx8mp/platform.mk
index 1d11e3d..6be2f98 100644
--- a/plat/imx/imx8m/imx8mp/platform.mk
+++ b/plat/imx/imx8m/imx8mp/platform.mk
@@ -28,6 +28,8 @@
plat/imx/imx8m/imx8mp/imx8mp_psci.c \
plat/imx/imx8m/imx8mp/gpc.c \
plat/imx/common/imx8_topology.c \
+ plat/imx/common/imx_ehf.c \
+ plat/imx/common/imx_sdei.c \
plat/imx/common/imx_sip_handler.c \
plat/imx/common/imx_sip_svc.c \
plat/imx/common/imx_uart_console.S \
@@ -54,3 +56,6 @@
IMX_BOOT_UART_BASE ?= 0x30890000
$(eval $(call add_define,IMX_BOOT_UART_BASE))
+
+EL3_EXCEPTION_HANDLING := 1
+SDEI_SUPPORT := 1
diff --git a/plat/imx/imx8m/imx8mq/imx8mq_psci.c b/plat/imx/imx8m/imx8mq/imx8mq_psci.c
index 04e191f..662017d 100644
--- a/plat/imx/imx8m/imx8mq/imx8mq_psci.c
+++ b/plat/imx/imx8m/imx8mq/imx8mq_psci.c
@@ -117,6 +117,7 @@
.pwr_domain_pwr_down_wfi = imx_pwr_domain_pwr_down_wfi,
.get_sys_suspend_power_state = imx_get_sys_suspend_power_state,
.system_reset = imx_system_reset,
+ .system_reset2 = imx_system_reset2,
.system_off = imx_system_off,
};
diff --git a/plat/imx/imx8m/include/imx8m_psci.h b/plat/imx/imx8m/include/imx8m_psci.h
index c33d25e..7d14d11 100644
--- a/plat/imx/imx8m/include/imx8m_psci.h
+++ b/plat/imx/imx8m/include/imx8m_psci.h
@@ -19,5 +19,6 @@
void imx_domain_suspend(const psci_power_state_t *target_state);
void imx_domain_suspend_finish(const psci_power_state_t *target_state);
void __dead2 imx_pwr_domain_pwr_down_wfi(const psci_power_state_t *target_state);
+int imx_system_reset2(int is_vendor, int reset_type, u_register_t cookie);
#endif /* IMX8M_PSCI_H */
diff --git a/plat/mediatek/common/mtk_plat_common.c b/plat/mediatek/common/mtk_plat_common.c
index f57e435..142b5c9 100644
--- a/plat/mediatek/common/mtk_plat_common.c
+++ b/plat/mediatek/common/mtk_plat_common.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -139,9 +139,9 @@
int32_t plat_get_soc_version(void)
{
- uint32_t manfid = (JEDEC_MTK_BKID << 24U) | (JEDEC_MTK_MFID << 16U);
+ uint32_t manfid = SOC_ID_SET_JEP_106(JEDEC_MTK_BKID, JEDEC_MTK_MFID);
- return (int32_t)(manfid | (SOC_CHIP_ID & 0xFFFFU));
+ return (int32_t)(manfid | (SOC_CHIP_ID & SOC_ID_IMPL_DEF_MASK));
}
int32_t plat_get_soc_revision(void)
diff --git a/plat/mediatek/mt8192/drivers/emi_mpu/emi_mpu.c b/plat/mediatek/mt8192/drivers/emi_mpu/emi_mpu.c
index d9541bd..26bed29 100644
--- a/plat/mediatek/mt8192/drivers/emi_mpu/emi_mpu.c
+++ b/plat/mediatek/mt8192/drivers/emi_mpu/emi_mpu.c
@@ -117,7 +117,7 @@
NO_PROT, FORBIDDEN, FORBIDDEN, NO_PROT);
emi_mpu_set_protection(®ion_info);
- /* Forbidden All */
+ /* DSP protect address */
region_info.start = 0x40000000ULL; /* dram base addr */
region_info.end = 0x1FFFF0000ULL;
region_info.region = 3;
@@ -128,6 +128,17 @@
FORBIDDEN, FORBIDDEN, FORBIDDEN, NO_PROT);
emi_mpu_set_protection(®ion_info);
+ /* Forbidden All */
+ region_info.start = 0x40000000ULL; /* dram base addr */
+ region_info.end = 0x1FFFF0000ULL;
+ region_info.region = 4;
+ SET_ACCESS_PERMISSION(region_info.apc, 1,
+ FORBIDDEN, FORBIDDEN, FORBIDDEN, FORBIDDEN,
+ FORBIDDEN, FORBIDDEN, FORBIDDEN, FORBIDDEN,
+ FORBIDDEN, FORBIDDEN, FORBIDDEN, FORBIDDEN,
+ FORBIDDEN, FORBIDDEN, FORBIDDEN, NO_PROT);
+ emi_mpu_set_protection(®ion_info);
+
dump_emi_mpu_regions();
}
diff --git a/plat/nvidia/tegra/common/tegra_platform.c b/plat/nvidia/tegra/common/tegra_platform.c
index d45d988..3894b74 100644
--- a/plat/nvidia/tegra/common/tegra_platform.c
+++ b/plat/nvidia/tegra/common/tegra_platform.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
@@ -280,9 +280,9 @@
int32_t plat_get_soc_version(void)
{
uint32_t chip_id = ((tegra_get_chipid() >> CHIP_ID_SHIFT) & CHIP_ID_MASK);
- uint32_t manfid = (JEDEC_NVIDIA_BKID << 24) | (JEDEC_NVIDIA_MFID << 16);
+ uint32_t manfid = SOC_ID_SET_JEP_106(JEDEC_NVIDIA_BKID, JEDEC_NVIDIA_MFID);
- return (int32_t)(manfid | (chip_id & 0xFFFF));
+ return (int32_t)(manfid | (chip_id & SOC_ID_IMPL_DEF_MASK));
}
/*
@@ -293,7 +293,8 @@
*/
int32_t plat_get_soc_revision(void)
{
- return (int32_t)((tegra_get_chipid_major() << 8) | tegra_get_chipid_minor());
+ return (int32_t)(((tegra_get_chipid_major() << 8) | tegra_get_chipid_minor()) &
+ SOC_ID_REV_MASK);
}
/*****************************************************************************
diff --git a/plat/nxp/common/plat_make_helper/plat_common_def.mk b/plat/nxp/common/plat_make_helper/plat_common_def.mk
new file mode 100644
index 0000000..86dacf8
--- /dev/null
+++ b/plat/nxp/common/plat_make_helper/plat_common_def.mk
@@ -0,0 +1,103 @@
+# Copyright 2020-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Include build macros, for example: SET_NXP_MAKE_FLAG
+include plat/nxp/common/plat_make_helper/plat_build_macros.mk
+
+# Adding platform specific defines
+
+$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
+
+ifeq (${POVDD_ENABLE},yes)
+$(eval $(call add_define,CONFIG_POVDD_ENABLE))
+endif
+
+ifneq (${FLASH_TYPE},)
+$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
+endif
+
+ifneq (${XSPI_FLASH_SZ},)
+$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
+endif
+
+ifneq (${QSPI_FLASH_SZ},)
+$(eval $(call add_define_val,NXP_QSPI_FLASH_SIZE,${QSPI_FLASH_SZ}))
+endif
+
+ifneq (${NOR_FLASH_SZ},)
+$(eval $(call add_define_val,NXP_NOR_FLASH_SIZE,${NOR_FLASH_SZ}))
+endif
+
+
+ifneq (${FSPI_ERASE_4K},)
+$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
+endif
+
+ifneq (${NUM_OF_DDRC},)
+$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
+endif
+
+ifeq (${CONFIG_DDR_NODIMM},1)
+$(eval $(call add_define,CONFIG_DDR_NODIMM))
+DDRC_NUM_DIMM := 1
+endif
+
+ifneq (${DDRC_NUM_DIMM},)
+$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
+endif
+
+ifneq (${DDRC_NUM_CS},)
+$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
+endif
+
+ifeq (${DDR_ADDR_DEC},yes)
+$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
+endif
+
+ifeq (${DDR_ECC_EN},yes)
+$(eval $(call add_define,CONFIG_DDR_ECC_EN))
+endif
+
+ifeq (${CONFIG_STATIC_DDR},1)
+$(eval $(call add_define,CONFIG_STATIC_DDR))
+endif
+
+# Platform can control the base address for non-volatile storage.
+#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
+
+ifeq (${WARM_BOOT},yes)
+$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
+endif
+
+# Selecting Boot Source for the TFA images.
+define add_boot_mode_define
+ ifeq ($(1),qspi)
+ $$(eval $$(call SET_NXP_MAKE_FLAG,QSPI_NEEDED,BL2))
+ $$(eval $$(call add_define,QSPI_BOOT))
+ else ifeq ($(1),sd)
+ $$(eval $$(call SET_NXP_MAKE_FLAG,SD_MMC_NEEDED,BL2))
+ $$(eval $$(call add_define,SD_BOOT))
+ else ifeq ($(1),emmc)
+ $$(eval $$(call SET_NXP_MAKE_FLAG,SD_MMC_NEEDED,BL2))
+ $$(eval $$(call add_define,EMMC_BOOT))
+ else ifeq ($(1),nor)
+ $$(eval $$(call SET_NXP_MAKE_FLAG,IFC_NOR_NEEDED,BL2))
+ $$(eval $$(call add_define,NOR_BOOT))
+ else ifeq ($(1),nand)
+ $$(eval $$(call SET_NXP_MAKE_FLAG,IFC_NAND_NEEDED,BL2))
+ $$(eval $$(call add_define,NAND_BOOT))
+ else ifeq ($(1),flexspi_nor)
+ $$(eval $$(call SET_NXP_MAKE_FLAG,XSPI_NEEDED,BL2))
+ $$(eval $$(call add_define,FLEXSPI_NOR_BOOT))
+ else
+ $$(error $(PLAT) Cannot Support Boot Mode: $(BOOT_MODE))
+ endif
+endef
+
+ifneq (,$(findstring $(BOOT_MODE),$(SUPPORTED_BOOT_MODE)))
+ $(eval $(call add_boot_mode_define,$(strip $(BOOT_MODE))))
+else
+ $(error $(PLAT) Un-supported Boot Mode = $(BOOT_MODE))
+endif
diff --git a/plat/nxp/common/plat_make_helper/soc_common_def.mk b/plat/nxp/common/plat_make_helper/soc_common_def.mk
new file mode 100644
index 0000000..fdd7249
--- /dev/null
+++ b/plat/nxp/common/plat_make_helper/soc_common_def.mk
@@ -0,0 +1,114 @@
+# Copyright 2020-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Adding SoC specific defines
+
+ifneq (${CACHE_LINE},)
+$(eval $(call add_define_val,PLATFORM_CACHE_LINE_SHIFT,${CACHE_LINE}))
+$(eval CACHE_WRITEBACK_GRANULE=$(shell echo $$((1 << $(CACHE_LINE)))))
+$(eval $(call add_define_val,CACHE_WRITEBACK_GRANULE,$(CACHE_WRITEBACK_GRANULE)))
+endif
+
+ifeq (${INTERCONNECT}, "CCI400")
+$(eval $(call add_define,NXP_HAS_${INTERCONNECT}))
+ICNNCT_ID := 0x420
+$(eval $(call add_define,ICNNCT_ID))
+endif
+
+ifeq (${INTERCONNECT}, "CCN508")
+$(eval $(call add_define,NXP_HAS_CCN508))
+endif
+
+ifneq (${CHASSIS},)
+$(eval $(call add_define,CONFIG_CHASSIS_${CHASSIS}))
+endif
+
+ifneq (${PLAT_DDR_PHY},)
+$(eval $(call add_define,NXP_DDR_${PLAT_DDR_PHY}))
+endif
+
+ifneq (${PHYS_SYS},)
+$(eval $(call add_define,CONFIG_PHYS_64BIT))
+endif
+
+ifneq (${CSF_HDR_SZ},)
+$(eval $(call add_define_val,CSF_HDR_SZ,${CSF_HDR_SZ}))
+endif
+
+ifneq (${OCRAM_START_ADDR},)
+$(eval $(call add_define_val,NXP_OCRAM_ADDR,${OCRAM_START_ADDR}))
+endif
+
+ifneq (${OCRAM_SIZE},)
+$(eval $(call add_define_val,NXP_OCRAM_SIZE,${OCRAM_SIZE}))
+endif
+
+ifneq (${NXP_ROM_RSVD},)
+$(eval $(call add_define_val,NXP_ROM_RSVD,${NXP_ROM_RSVD}))
+endif
+
+ifneq (${BL2_BASE},)
+$(eval $(call add_define_val,BL2_BASE,${BL2_BASE}))
+endif
+
+ifeq (${SEC_MEM_NON_COHERENT},yes)
+$(eval $(call add_define,SEC_MEM_NON_COHERENT))
+endif
+
+ifneq (${NXP_ESDHC_ENDIANNESS},)
+$(eval $(call add_define,NXP_ESDHC_${NXP_ESDHC_ENDIANNESS}))
+endif
+
+ifneq (${NXP_SFP_VER},)
+$(eval $(call add_define,NXP_SFP_VER_${NXP_SFP_VER}))
+endif
+
+ifneq (${NXP_SFP_ENDIANNESS},)
+$(eval $(call add_define,NXP_SFP_${NXP_SFP_ENDIANNESS}))
+endif
+
+ifneq (${NXP_GPIO_ENDIANNESS},)
+$(eval $(call add_define,NXP_GPIO_${NXP_GPIO_ENDIANNESS}))
+endif
+
+ifneq (${NXP_SNVS_ENDIANNESS},)
+$(eval $(call add_define,NXP_SNVS_${NXP_SNVS_ENDIANNESS}))
+endif
+
+ifneq (${NXP_GUR_ENDIANNESS},)
+$(eval $(call add_define,NXP_GUR_${NXP_GUR_ENDIANNESS}))
+endif
+
+ifneq (${NXP_FSPI_ENDIANNESS},)
+$(eval $(call add_define,NXP_FSPI_${NXP_FSPI_ENDIANNESS}))
+endif
+
+ifneq (${NXP_SEC_ENDIANNESS},)
+$(eval $(call add_define,NXP_SEC_${NXP_SEC_ENDIANNESS}))
+endif
+
+ifneq (${NXP_DDR_ENDIANNESS},)
+$(eval $(call add_define,NXP_DDR_${NXP_DDR_ENDIANNESS}))
+endif
+
+ifneq (${NXP_QSPI_ENDIANNESS},)
+$(eval $(call add_define,NXP_QSPI_${NXP_QSPI_ENDIANNESS}))
+endif
+
+ifneq (${NXP_SCFG_ENDIANNESS},)
+$(eval $(call add_define,NXP_SCFG_${NXP_SCFG_ENDIANNESS}))
+endif
+
+ifneq (${NXP_IFC_ENDIANNESS},)
+$(eval $(call add_define,NXP_IFC_${NXP_IFC_ENDIANNESS}))
+endif
+
+ifneq (${NXP_DDR_INTLV_256B},)
+$(eval $(call add_define,NXP_DDR_INTLV_256B))
+endif
+
+ifneq (${PLAT_XLAT_TABLES_DYNAMIC},)
+$(eval $(call add_define,PLAT_XLAT_TABLES_DYNAMIC))
+endif
diff --git a/plat/nxp/soc-lx2160a/lx2160aqds/platform.mk b/plat/nxp/soc-lx2160a/lx2160aqds/platform.mk
index 5b95222..226b22b 100644
--- a/plat/nxp/soc-lx2160a/lx2160aqds/platform.mk
+++ b/plat/nxp/soc-lx2160a/lx2160aqds/platform.mk
@@ -33,59 +33,19 @@
# config is enabled for future use cases.
FSPI_ERASE_4K := 0
- # Platform specific features.
+# Platform specific features.
WARM_BOOT := yes
- # Adding platform specific defines
-
-$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
-
-ifeq (${POVDD_ENABLE},yes)
-$(eval $(call add_define,CONFIG_POVDD_ENABLE))
-endif
-
-ifneq (${FLASH_TYPE},)
-$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
-endif
-
-ifneq (${XSPI_FLASH_SZ},)
-$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
-endif
-
-ifneq (${FSPI_ERASE_4K},)
-$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
-endif
-
-ifneq (${NUM_OF_DDRC},)
-$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
-endif
-
-ifneq (${DDRC_NUM_DIMM},)
-$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
-endif
-
-ifneq (${DDRC_NUM_CS},)
-$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
-endif
-
-ifeq (${DDR_ADDR_DEC},yes)
-$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
-endif
-
-ifeq (${DDR_ECC_EN},yes)
-$(eval $(call add_define,CONFIG_DDR_ECC_EN))
-endif
-
-# Platform can control the base address for non-volatile storage.
-#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
-
-ifeq (${WARM_BOOT},yes)
-$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
-endif
-
- # Adding Platform files build files
+# Adding Platform files build files
BL2_SOURCES += ${BOARD_PATH}/ddr_init.c\
${BOARD_PATH}/platform.c
- # Adding SoC build info
+SUPPORTED_BOOT_MODE := flexspi_nor \
+ sd \
+ emmc
+
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Adding SoC build info
include plat/nxp/soc-lx2160a/soc.mk
diff --git a/plat/nxp/soc-lx2160a/lx2160ardb/platform.mk b/plat/nxp/soc-lx2160a/lx2160ardb/platform.mk
index e56fbf1..ffb5fad 100644
--- a/plat/nxp/soc-lx2160a/lx2160ardb/platform.mk
+++ b/plat/nxp/soc-lx2160a/lx2160ardb/platform.mk
@@ -36,56 +36,16 @@
# Platform specific features.
WARM_BOOT := no
- # Adding platform specific defines
-
-$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
-
-ifeq (${POVDD_ENABLE},yes)
-$(eval $(call add_define,CONFIG_POVDD_ENABLE))
-endif
-
-ifneq (${FLASH_TYPE},)
-$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
-endif
-
-ifneq (${XSPI_FLASH_SZ},)
-$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
-endif
-
-ifneq (${FSPI_ERASE_4K},)
-$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
-endif
-
-ifneq (${NUM_OF_DDRC},)
-$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
-endif
-
-ifneq (${DDRC_NUM_DIMM},)
-$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
-endif
-
-ifneq (${DDRC_NUM_CS},)
-$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
-endif
-
-ifeq (${DDR_ADDR_DEC},yes)
-$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
-endif
-
-ifeq (${DDR_ECC_EN},yes)
-$(eval $(call add_define,CONFIG_DDR_ECC_EN))
-endif
-
-# Platform can control the base address for non-volatile storage.
-#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
-
-ifeq (${WARM_BOOT},yes)
-$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
-endif
-
# Adding Platform files build files
BL2_SOURCES += ${BOARD_PATH}/ddr_init.c\
${BOARD_PATH}/platform.c
+SUPPORTED_BOOT_MODE := flexspi_nor \
+ sd \
+ emmc
+
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
# Adding SoC build info
include plat/nxp/soc-lx2160a/soc.mk
diff --git a/plat/nxp/soc-lx2160a/lx2162aqds/platform.mk b/plat/nxp/soc-lx2160a/lx2162aqds/platform.mk
index fbdcd83..2b4712c 100644
--- a/plat/nxp/soc-lx2160a/lx2162aqds/platform.mk
+++ b/plat/nxp/soc-lx2160a/lx2162aqds/platform.mk
@@ -25,7 +25,7 @@
ERRATA_DDR_A050450 := 1
- # On-Board Flash Details
+# On-Board Flash Details
FLASH_TYPE := MT35XU512A
XSPI_FLASH_SZ := 0x10000000
NXP_XSPI_NOR_UNIT_SIZE := 0x20000
@@ -34,59 +34,19 @@
# config is enabled for future use cases.
FSPI_ERASE_4K := 0
- # Platform specific features.
+# Platform specific features.
WARM_BOOT := yes
- # Adding platform specific defines
-
-$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
-
-ifeq (${POVDD_ENABLE},yes)
-$(eval $(call add_define,CONFIG_POVDD_ENABLE))
-endif
-
-ifneq (${FLASH_TYPE},)
-$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
-endif
-
-ifneq (${XSPI_FLASH_SZ},)
-$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
-endif
-
-ifneq (${FSPI_ERASE_4K},)
-$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
-endif
-
-ifneq (${NUM_OF_DDRC},)
-$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
-endif
-
-ifneq (${DDRC_NUM_DIMM},)
-$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
-endif
-
-ifneq (${DDRC_NUM_CS},)
-$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
-endif
-
-ifeq (${DDR_ADDR_DEC},yes)
-$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
-endif
-
-ifeq (${DDR_ECC_EN},yes)
-$(eval $(call add_define,CONFIG_DDR_ECC_EN))
-endif
-
-# Platform can control the base address for non-volatile storage.
-#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
-
-ifeq (${WARM_BOOT},yes)
-$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
-endif
-
- # Adding Platform files build files
+# Adding Platform files build files
BL2_SOURCES += ${BOARD_PATH}/ddr_init.c\
${BOARD_PATH}/platform.c
- # Adding SoC build info
+SUPPORTED_BOOT_MODE := flexspi_nor \
+ sd \
+ emmc
+
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Adding SoC build info
include plat/nxp/soc-lx2160a/soc.mk
diff --git a/plat/rpi/rpi4/include/rpi_hw.h b/plat/rpi/rpi4/include/rpi_hw.h
index 7185106..0430d46 100644
--- a/plat/rpi/rpi4/include/rpi_hw.h
+++ b/plat/rpi/rpi4/include/rpi_hw.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -13,14 +13,16 @@
* Peripherals
*/
-#define RPI_IO_BASE ULL(0xFE000000)
-#define RPI_IO_SIZE ULL(0x02000000)
+#define RPI_IO_BASE ULL(0xFC000000)
+#define RPI_IO_SIZE ULL(0x04000000)
+
+#define RPI_LEGACY_BASE (ULL(0x02000000) + RPI_IO_BASE)
/*
* ARM <-> VideoCore mailboxes
*/
#define RPI3_MBOX_OFFSET ULL(0x0000B880)
-#define RPI3_MBOX_BASE (RPI_IO_BASE + RPI3_MBOX_OFFSET)
+#define RPI3_MBOX_BASE (RPI_LEGACY_BASE + RPI3_MBOX_OFFSET)
/* VideoCore -> ARM */
#define RPI3_MBOX0_READ_OFFSET ULL(0x00000000)
#define RPI3_MBOX0_PEEK_OFFSET ULL(0x00000010)
@@ -41,7 +43,7 @@
* Power management, reset controller, watchdog.
*/
#define RPI3_IO_PM_OFFSET ULL(0x00100000)
-#define RPI3_PM_BASE (RPI_IO_BASE + RPI3_IO_PM_OFFSET)
+#define RPI3_PM_BASE (RPI_LEGACY_BASE + RPI3_IO_PM_OFFSET)
/* Registers on top of RPI3_PM_BASE. */
#define RPI3_PM_RSTC_OFFSET ULL(0x0000001C)
#define RPI3_PM_RSTS_OFFSET ULL(0x00000020)
@@ -62,7 +64,7 @@
* Hardware random number generator.
*/
#define RPI3_IO_RNG_OFFSET ULL(0x00104000)
-#define RPI3_RNG_BASE (RPI_IO_BASE + RPI3_IO_RNG_OFFSET)
+#define RPI3_RNG_BASE (RPI_LEGACY_BASE + RPI3_IO_RNG_OFFSET)
#define RPI3_RNG_CTRL_OFFSET ULL(0x00000000)
#define RPI3_RNG_STATUS_OFFSET ULL(0x00000004)
#define RPI3_RNG_DATA_OFFSET ULL(0x00000008)
@@ -82,22 +84,22 @@
* There is also a PL011 UART, multiplexed to the same pins.
*/
#define RPI4_IO_MINI_UART_OFFSET ULL(0x00215040)
-#define RPI4_MINI_UART_BASE (RPI_IO_BASE + RPI4_IO_MINI_UART_OFFSET)
+#define RPI4_MINI_UART_BASE (RPI_LEGACY_BASE + RPI4_IO_MINI_UART_OFFSET)
#define RPI4_IO_PL011_UART_OFFSET ULL(0x00201000)
-#define RPI4_PL011_UART_BASE (RPI_IO_BASE + RPI4_IO_PL011_UART_OFFSET)
+#define RPI4_PL011_UART_BASE (RPI_LEGACY_BASE + RPI4_IO_PL011_UART_OFFSET)
#define RPI4_PL011_UART_CLOCK ULL(48000000)
/*
* GPIO controller
*/
#define RPI3_IO_GPIO_OFFSET ULL(0x00200000)
-#define RPI3_GPIO_BASE (RPI_IO_BASE + RPI3_IO_GPIO_OFFSET)
+#define RPI3_GPIO_BASE (RPI_LEGACY_BASE + RPI3_IO_GPIO_OFFSET)
/*
* SDHost controller
*/
#define RPI3_IO_SDHOST_OFFSET ULL(0x00202000)
-#define RPI3_SDHOST_BASE (RPI_IO_BASE + RPI3_IO_SDHOST_OFFSET)
+#define RPI3_SDHOST_BASE (RPI_LEGACY_BASE + RPI3_IO_SDHOST_OFFSET)
/*
* GIC interrupt controller
diff --git a/plat/st/common/include/stm32mp_common.h b/plat/st/common/include/stm32mp_common.h
index feeb4a7..42d3487 100644
--- a/plat/st/common/include/stm32mp_common.h
+++ b/plat/st/common/include/stm32mp_common.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2018-2020, STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2018-2021, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -11,6 +11,9 @@
#include <platform_def.h>
+#define JEDEC_ST_BKID U(0x0)
+#define JEDEC_ST_MFID U(0x20)
+
/* Functions to save and get boot context address given by ROM code */
void stm32mp_save_boot_ctx_address(uintptr_t address);
uintptr_t stm32mp_get_boot_ctx_address(void);
@@ -64,6 +67,15 @@
/* Return node offset for target GPIO bank ID @bank or a FDT error code */
int stm32_get_gpio_bank_pinctrl_node(void *fdt, unsigned int bank);
+/* Get the chip revision */
+uint32_t stm32mp_get_chip_version(void);
+/* Get the chip device ID */
+uint32_t stm32mp_get_chip_dev_id(void);
+
+/* Get SOC name */
+#define STM32_SOC_NAME_SIZE 20
+void stm32mp_get_soc_name(char name[STM32_SOC_NAME_SIZE]);
+
/* Print CPU information */
void stm32mp_print_cpuinfo(void);
diff --git a/plat/st/common/include/stm32mp_dt.h b/plat/st/common/include/stm32mp_dt.h
index e3b4e59..299c0b1 100644
--- a/plat/st/common/include/stm32mp_dt.h
+++ b/plat/st/common/include/stm32mp_dt.h
@@ -1,6 +1,6 @@
/*
- * Copyright (c) 2020, STMicroelectronics - All Rights Reserved
- * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2017-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -9,6 +9,7 @@
#define STM32MP_DT_H
#include <stdbool.h>
+#include <stdint.h>
#define DT_DISABLED U(0)
#define DT_NON_SECURE U(1)
@@ -25,7 +26,7 @@
/*******************************************************************************
* Function and variable prototypes
******************************************************************************/
-int dt_open_and_check(void);
+int dt_open_and_check(uintptr_t dt_addr);
int fdt_get_address(void **fdt_addr);
bool fdt_check_node(int node);
uint8_t fdt_get_status(int node);
diff --git a/plat/st/common/stm32mp_common.c b/plat/st/common/stm32mp_common.c
index 89d8078..d3de1e1 100644
--- a/plat/st/common/stm32mp_common.c
+++ b/plat/st/common/stm32mp_common.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -12,8 +12,10 @@
#include <arch_helpers.h>
#include <common/debug.h>
#include <drivers/st/stm32mp_clkfunc.h>
+#include <lib/smccc.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <plat/common/platform.h>
+#include <services/arm_arch_svc.h>
uintptr_t plat_get_ns_image_entrypoint(void)
{
@@ -111,3 +113,36 @@
return mmap_remove_dynamic_region(STM32MP_DDR_BASE,
STM32MP_DDR_MAX_SIZE);
}
+
+/*****************************************************************************
+ * plat_is_smccc_feature_available() - This function checks whether SMCCC
+ * feature is availabile for platform.
+ * @fid: SMCCC function id
+ *
+ * Return SMC_ARCH_CALL_SUCCESS if SMCCC feature is available and
+ * SMC_ARCH_CALL_NOT_SUPPORTED otherwise.
+ *****************************************************************************/
+int32_t plat_is_smccc_feature_available(u_register_t fid)
+{
+ switch (fid) {
+ case SMCCC_ARCH_SOC_ID:
+ return SMC_ARCH_CALL_SUCCESS;
+ default:
+ return SMC_ARCH_CALL_NOT_SUPPORTED;
+ }
+}
+
+/* Get SOC version */
+int32_t plat_get_soc_version(void)
+{
+ uint32_t chip_id = stm32mp_get_chip_dev_id();
+ uint32_t manfid = SOC_ID_SET_JEP_106(JEDEC_ST_BKID, JEDEC_ST_MFID);
+
+ return (int32_t)(manfid | (chip_id & SOC_ID_IMPL_DEF_MASK));
+}
+
+/* Get SOC revision */
+int32_t plat_get_soc_revision(void)
+{
+ return (int32_t)(stm32mp_get_chip_version() & SOC_ID_REV_MASK);
+}
diff --git a/plat/st/common/stm32mp_dt.c b/plat/st/common/stm32mp_dt.c
index 4f130ce..6465c10 100644
--- a/plat/st/common/stm32mp_dt.c
+++ b/plat/st/common/stm32mp_dt.c
@@ -19,20 +19,19 @@
#include <stm32mp_dt.h>
-static int fdt_checked;
-
-static void *fdt = (void *)(uintptr_t)STM32MP_DTB_BASE;
+static void *fdt;
/*******************************************************************************
* This function checks device tree file with its header.
* Returns 0 on success and a negative FDT error code on failure.
******************************************************************************/
-int dt_open_and_check(void)
+int dt_open_and_check(uintptr_t dt_addr)
{
- int ret = fdt_check_header(fdt);
+ int ret;
+ ret = fdt_check_header((void *)dt_addr);
if (ret == 0) {
- fdt_checked = 1;
+ fdt = (void *)dt_addr;
}
return ret;
@@ -45,11 +44,13 @@
******************************************************************************/
int fdt_get_address(void **fdt_addr)
{
- if (fdt_checked == 1) {
- *fdt_addr = fdt;
+ if (fdt == NULL) {
+ return 0;
}
- return fdt_checked;
+ *fdt_addr = fdt;
+
+ return 1;
}
/*******************************************************************************
diff --git a/plat/st/stm32mp1/bl2_plat_setup.c b/plat/st/stm32mp1/bl2_plat_setup.c
index 0e95f49..91073b8 100644
--- a/plat/st/stm32mp1/bl2_plat_setup.c
+++ b/plat/st/stm32mp1/bl2_plat_setup.c
@@ -196,7 +196,7 @@
configure_mmu();
- if (dt_open_and_check() < 0) {
+ if (dt_open_and_check(STM32MP_DTB_BASE) < 0) {
panic();
}
diff --git a/plat/st/stm32mp1/platform.mk b/plat/st/stm32mp1/platform.mk
index 128dbc4..e6645e0 100644
--- a/plat/st/stm32mp1/platform.mk
+++ b/plat/st/stm32mp1/platform.mk
@@ -44,11 +44,6 @@
STM32MP_SPI_NOR ?= 0
STM32MP_EMMC_BOOT ?= 0
-ifeq ($(filter 1,${STM32MP_EMMC} ${STM32MP_SDMMC} ${STM32MP_RAW_NAND} \
- ${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
-$(error "No boot device driver is enabled")
-endif
-
# Device tree
DTB_FILE_NAME ?= stm32mp157c-ev1.dtb
FDT_SOURCES := $(addprefix fdts/, $(patsubst %.dtb,%.dts,$(DTB_FILE_NAME)))
@@ -199,13 +194,25 @@
endif
# Compilation rules
-.PHONY: check_dtc_version stm32image clean_stm32image
+.PHONY: check_dtc_version stm32image clean_stm32image check_boot_device
.SUFFIXES:
all: check_dtc_version stm32image ${STM32_TF_STM32}
distclean realclean clean: clean_stm32image
+bl2: check_boot_device
+
+check_boot_device:
+ @if [ ${STM32MP_EMMC} != 1 ] && \
+ [ ${STM32MP_SDMMC} != 1 ] && \
+ [ ${STM32MP_RAW_NAND} != 1 ] && \
+ [ ${STM32MP_SPI_NAND} != 1 ] && \
+ [ ${STM32MP_SPI_NOR} != 1 ]; then \
+ echo "No boot device driver is enabled"; \
+ false; \
+ fi
+
stm32image: ${STM32IMAGE}
${STM32IMAGE}: ${STM32IMAGE_SRC}
diff --git a/plat/st/stm32mp1/sp_min/sp_min_setup.c b/plat/st/stm32mp1/sp_min/sp_min_setup.c
index 9b8c3ea..334f914a 100644
--- a/plat/st/stm32mp1/sp_min/sp_min_setup.c
+++ b/plat/st/stm32mp1/sp_min/sp_min_setup.c
@@ -146,7 +146,7 @@
bl_params = bl_params->next_params_info;
}
- if (dt_open_and_check() < 0) {
+ if (dt_open_and_check(STM32MP_DTB_BASE) < 0) {
panic();
}
diff --git a/plat/st/stm32mp1/stm32mp1_def.h b/plat/st/stm32mp1/stm32mp1_def.h
index 9e5bfdc..155d63d 100644
--- a/plat/st/stm32mp1/stm32mp1_def.h
+++ b/plat/st/stm32mp1/stm32mp1_def.h
@@ -31,6 +31,8 @@
/*******************************************************************************
* CHIP ID
******************************************************************************/
+#define STM32MP1_CHIP_ID U(0x500)
+
#define STM32MP157C_PART_NB U(0x05000000)
#define STM32MP157A_PART_NB U(0x05000001)
#define STM32MP153C_PART_NB U(0x05000024)
diff --git a/plat/st/stm32mp1/stm32mp1_private.c b/plat/st/stm32mp1/stm32mp1_private.c
index bc77ee3..1af0075 100644
--- a/plat/st/stm32mp1/stm32mp1_private.c
+++ b/plat/st/stm32mp1/stm32mp1_private.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -153,63 +153,70 @@
}
}
-static int get_part_number(uint32_t *part_nb)
+uint32_t stm32mp_get_chip_version(void)
{
- uint32_t part_number;
+ uint32_t version = 0U;
+
+ if (stm32mp1_dbgmcu_get_chip_version(&version) < 0) {
+ INFO("Cannot get CPU version, debug disabled\n");
+ return 0U;
+ }
+
+ return version;
+}
+
+uint32_t stm32mp_get_chip_dev_id(void)
+{
uint32_t dev_id;
- assert(part_nb != NULL);
-
if (stm32mp1_dbgmcu_get_chip_dev_id(&dev_id) < 0) {
- return -1;
+ INFO("Use default chip ID, debug disabled\n");
+ dev_id = STM32MP1_CHIP_ID;
+ }
+
+ return dev_id;
+}
+
+static uint32_t get_part_number(void)
+{
+ static uint32_t part_number;
+
+ if (part_number != 0U) {
+ return part_number;
}
if (bsec_shadow_read_otp(&part_number, PART_NUMBER_OTP) != BSEC_OK) {
- ERROR("BSEC: PART_NUMBER_OTP Error\n");
- return -1;
+ panic();
}
part_number = (part_number & PART_NUMBER_OTP_PART_MASK) >>
PART_NUMBER_OTP_PART_SHIFT;
- *part_nb = part_number | (dev_id << 16);
+ part_number |= stm32mp_get_chip_dev_id() << 16;
- return 0;
+ return part_number;
}
-static int get_cpu_package(uint32_t *cpu_package)
+static uint32_t get_cpu_package(void)
{
uint32_t package;
- assert(cpu_package != NULL);
-
if (bsec_shadow_read_otp(&package, PACKAGE_OTP) != BSEC_OK) {
- ERROR("BSEC: PACKAGE_OTP Error\n");
- return -1;
+ panic();
}
- *cpu_package = (package & PACKAGE_OTP_PKG_MASK) >>
+ package = (package & PACKAGE_OTP_PKG_MASK) >>
PACKAGE_OTP_PKG_SHIFT;
- return 0;
+ return package;
}
-void stm32mp_print_cpuinfo(void)
+void stm32mp_get_soc_name(char name[STM32_SOC_NAME_SIZE])
{
- const char *cpu_s, *cpu_r, *pkg;
- uint32_t part_number;
- uint32_t cpu_package;
- uint32_t chip_dev_id;
- int ret;
+ char *cpu_s, *cpu_r, *pkg;
/* MPUs Part Numbers */
- ret = get_part_number(&part_number);
- if (ret < 0) {
- WARN("Cannot get part number\n");
- return;
- }
-
- switch (part_number) {
+ switch (get_part_number()) {
case STM32MP157C_PART_NB:
cpu_s = "157C";
break;
@@ -252,13 +259,7 @@
}
/* Package */
- ret = get_cpu_package(&cpu_package);
- if (ret < 0) {
- WARN("Cannot get CPU package\n");
- return;
- }
-
- switch (cpu_package) {
+ switch (get_cpu_package()) {
case PKG_AA_LFBGA448:
pkg = "AA";
break;
@@ -277,13 +278,7 @@
}
/* REVISION */
- ret = stm32mp1_dbgmcu_get_chip_version(&chip_dev_id);
- if (ret < 0) {
- WARN("Cannot get CPU version\n");
- return;
- }
-
- switch (chip_dev_id) {
+ switch (stm32mp_get_chip_version()) {
case STM32MP1_REV_B:
cpu_r = "B";
break;
@@ -295,7 +290,16 @@
break;
}
- NOTICE("CPU: STM32MP%s%s Rev.%s\n", cpu_s, pkg, cpu_r);
+ snprintf(name, STM32_SOC_NAME_SIZE,
+ "STM32MP%s%s Rev.%s", cpu_s, pkg, cpu_r);
+}
+
+void stm32mp_print_cpuinfo(void)
+{
+ char name[STM32_SOC_NAME_SIZE];
+
+ stm32mp_get_soc_name(name);
+ NOTICE("CPU: %s\n", name);
}
void stm32mp_print_boardinfo(void)
@@ -349,20 +353,12 @@
/* Return true when SoC provides a single Cortex-A7 core, and false otherwise */
bool stm32mp_is_single_core(void)
{
- uint32_t part_number;
-
- if (get_part_number(&part_number) < 0) {
- ERROR("Invalid part number, assume single core chip");
- return true;
- }
-
- switch (part_number) {
+ switch (get_part_number()) {
case STM32MP151A_PART_NB:
case STM32MP151C_PART_NB:
case STM32MP151D_PART_NB:
case STM32MP151F_PART_NB:
return true;
-
default:
return false;
}
diff --git a/plat/xilinx/zynqmp/aarch64/zynqmp_common.c b/plat/xilinx/zynqmp/aarch64/zynqmp_common.c
index ec433ff..fae73cf 100644
--- a/plat/xilinx/zynqmp/aarch64/zynqmp_common.c
+++ b/plat/xilinx/zynqmp/aarch64/zynqmp_common.c
@@ -148,11 +148,6 @@
.id = 0x40,
.name = "XCZU11EG",
},
- { /* For testing purpose only */
- .id = 0x50,
- .ver = 0x2c,
- .name = "XCZU15CG",
- },
{
.id = 0x50,
.name = "XCZU15EG",
@@ -334,9 +329,10 @@
break;
}
- NOTICE("TF-A running on %s/%s v%d/RTL%d.%d at 0x%x\n",
- zynqmp_print_silicon_idcode(), label, zynqmp_get_ps_ver(),
- (rtl & 0xf0) >> 4, rtl & 0xf, BL31_BASE);
+ NOTICE("TF-A running on %s/%s at 0x%x\n",
+ zynqmp_print_silicon_idcode(), label, BL31_BASE);
+ VERBOSE("TF-A running on v%d/RTL%d.%d\n",
+ zynqmp_get_ps_ver(), (rtl & 0xf0) >> 4, rtl & 0xf);
}
#else
static inline void zynqmp_print_platform_name(void) { }
diff --git a/plat/xilinx/zynqmp/bl31_zynqmp_setup.c b/plat/xilinx/zynqmp/bl31_zynqmp_setup.c
index 4a09b4b..bbe297f 100644
--- a/plat/xilinx/zynqmp/bl31_zynqmp_setup.c
+++ b/plat/xilinx/zynqmp/bl31_zynqmp_setup.c
@@ -123,25 +123,6 @@
}
}
-/* Enable the test setup */
-#ifndef ZYNQMP_TESTING
-static void zynqmp_testing_setup(void) { }
-#else
-static void zynqmp_testing_setup(void)
-{
- uint32_t actlr_el3, actlr_el2;
-
- /* Enable CPU ACTLR AND L2ACTLR RW access from non-secure world */
- actlr_el3 = read_actlr_el3();
- actlr_el2 = read_actlr_el2();
-
- actlr_el3 |= ACTLR_EL3_L2ACTLR_BIT | ACTLR_EL3_CPUACTLR_BIT;
- actlr_el2 |= ACTLR_EL3_L2ACTLR_BIT | ACTLR_EL3_CPUACTLR_BIT;
- write_actlr_el3(actlr_el3);
- write_actlr_el2(actlr_el2);
-}
-#endif
-
#if ZYNQMP_WDT_RESTART
static interrupt_type_handler_t type_el3_interrupt_table[MAX_INTR_EL3];
@@ -183,7 +164,6 @@
/* Initialize the gic cpu and distributor interfaces */
plat_arm_gic_driver_init();
plat_arm_gic_init();
- zynqmp_testing_setup();
}
void bl31_plat_runtime_setup(void)
diff --git a/plat/xilinx/zynqmp/plat_psci.c b/plat/xilinx/zynqmp/plat_psci.c
index f579f79..f78b88c 100644
--- a/plat/xilinx/zynqmp/plat_psci.c
+++ b/plat/xilinx/zynqmp/plat_psci.c
@@ -179,14 +179,6 @@
return PSCI_E_SUCCESS;
}
-int zynqmp_validate_ns_entrypoint(unsigned long ns_entrypoint)
-{
- VERBOSE("%s: ns_entrypoint: 0x%lx\n", __func__, ns_entrypoint);
-
- /* FIXME: Actually validate */
- return PSCI_E_SUCCESS;
-}
-
void zynqmp_get_sys_suspend_power_state(psci_power_state_t *req_state)
{
req_state->pwr_domain_state[PSCI_CPU_PWR_LVL] = PLAT_MAX_OFF_STATE;
@@ -206,7 +198,6 @@
.system_off = zynqmp_system_off,
.system_reset = zynqmp_system_reset,
.validate_power_state = zynqmp_validate_power_state,
- .validate_ns_entrypoint = zynqmp_validate_ns_entrypoint,
.get_sys_suspend_power_state = zynqmp_get_sys_suspend_power_state,
};
diff --git a/services/std_svc/spmd/spmd_main.c b/services/std_svc/spmd/spmd_main.c
index e18d94c..dda127f 100644
--- a/services/std_svc/spmd/spmd_main.c
+++ b/services/std_svc/spmd/spmd_main.c
@@ -562,6 +562,30 @@
return spmd_ffa_error_return(handle, FFA_ERROR_NOT_SUPPORTED);
break; /* Not reached */
+ case FFA_SPM_ID_GET:
+ if (MAKE_FFA_VERSION(1, 1) > FFA_VERSION_COMPILED) {
+ return spmd_ffa_error_return(handle,
+ FFA_ERROR_NOT_SUPPORTED);
+ }
+ /*
+ * Returns the ID of the SPMC or SPMD depending on the FF-A
+ * instance where this function is invoked
+ */
+ if (!secure_origin) {
+ SMC_RET8(handle, FFA_SUCCESS_SMC32,
+ FFA_TARGET_INFO_MBZ, spmc_attrs.spmc_id,
+ FFA_PARAM_MBZ, FFA_PARAM_MBZ,
+ FFA_PARAM_MBZ, FFA_PARAM_MBZ,
+ FFA_PARAM_MBZ);
+ }
+ SMC_RET8(handle, FFA_SUCCESS_SMC32,
+ FFA_TARGET_INFO_MBZ, SPMD_DIRECT_MSG_ENDPOINT_ID,
+ FFA_PARAM_MBZ, FFA_PARAM_MBZ,
+ FFA_PARAM_MBZ, FFA_PARAM_MBZ,
+ FFA_PARAM_MBZ);
+
+ break; /* not reached */
+
case FFA_MSG_SEND_DIRECT_REQ_SMC32:
if (secure_origin && spmd_is_spmc_message(x1)) {
ret = spmd_handle_spmc_message(x3, x4,