diff --git a/plat/intel/soc/stratix10/aarch64/plat_helpers.S b/plat/intel/soc/stratix10/aarch64/plat_helpers.S
new file mode 100644
index 0000000..8f755be
--- /dev/null
+++ b/plat/intel/soc/stratix10/aarch64/plat_helpers.S
@@ -0,0 +1,129 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <cpu_macros.S>
+#include <platform_def.h>
+
+	.globl	plat_secondary_cold_boot_setup
+	.globl	platform_is_primary_cpu
+	.globl	plat_is_my_cpu_primary
+	.globl	plat_my_core_pos
+	.globl	plat_crash_console_init
+	.globl	plat_crash_console_putc
+	.globl  plat_crash_console_flush
+	.globl	platform_mem_init
+
+	.globl plat_get_my_entrypoint
+	.globl stratix10_sec_entry
+	.globl cpuid_release
+
+	/* -----------------------------------------------------
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * This function performs any platform specific actions
+	 * needed for a secondary cpu after a cold reset e.g
+	 * mark the cpu's presence, mechanism to place it in a
+	 * holding pen etc.
+	 * -----------------------------------------------------
+	 */
+func plat_secondary_cold_boot_setup
+	/* Wait until the it gets reset signal from rstmgr gets populated */
+poll_mailbox:
+	 wfi
+
+	adr	x0, stratix10_sec_entry
+	ldr	x1, [x0]
+	adr	x2, cpuid_release
+	ldr	x3, [x2]
+	mrs	x4, mpidr_el1
+	and	x4, x4, #0xff
+	cmp	x3, x4
+	b.ne	poll_mailbox
+	br	x1
+endfunc plat_secondary_cold_boot_setup
+
+func platform_is_primary_cpu
+	and	x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+	cmp	x0, #PLAT_PRIMARY_CPU
+	cset	x0, eq
+	ret
+endfunc platform_is_primary_cpu
+
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	b   platform_is_primary_cpu
+endfunc plat_is_my_cpu_primary
+
+func plat_my_core_pos
+	mrs	x0, mpidr_el1
+	and	x1, x0, #MPIDR_CPU_MASK
+	and	x0, x0, #MPIDR_CLUSTER_MASK
+	add	x0, x1, x0, LSR #6
+	ret
+endfunc plat_my_core_pos
+
+func plat_get_my_entrypoint
+	adr	x1,stratix10_sec_entry
+	ldr	x0, [x1]
+	ret
+endfunc plat_get_my_entrypoint
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_init(void)
+	 * Function to initialize the crash console
+	 * without a C Runtime to print crash report.
+	 * Clobber list : x0, x1, x2
+	 * ---------------------------------------------
+	 */
+func plat_crash_console_init
+	mov_imm	x0, PLAT_UART0_BASE
+	mov_imm	x1, PLAT_UART_CLOCK
+	mov_imm	x2, PLAT_BAUDRATE
+	b	console_16550_core_init
+endfunc plat_crash_console_init
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_putc(void)
+	 * Function to print a character on the crash
+	 * console without a C Runtime.
+	 * Clobber list : x1, x2
+	 * ---------------------------------------------
+	 */
+func plat_crash_console_putc
+	mov_imm x1, PLAT_UART0_BASE
+	b	console_16550_core_putc
+endfunc plat_crash_console_putc
+
+func plat_crash_console_flush
+	mov_imm x0, CRASH_CONSOLE_BASE
+	b	console_16550_core_flush
+endfunc plat_crash_console_flush
+
+
+	/* --------------------------------------------------------
+	 * void platform_mem_init (void);
+	 *
+	 * Any memory init, relocation to be done before the
+	 * platform boots. Called very early in the boot process.
+	 * --------------------------------------------------------
+	 */
+func platform_mem_init
+	mov	x0, #0
+	ret
+endfunc platform_mem_init
+
+
+	.data
+	.align 3
+
+stratix10_sec_entry:
+	.quad 0
+
+cpuid_release:
+	.quad 0
+
diff --git a/plat/intel/soc/stratix10/aarch64/platform_common.c b/plat/intel/soc/stratix10/aarch64/platform_common.c
new file mode 100644
index 0000000..094a362
--- /dev/null
+++ b/plat/intel/soc/stratix10/aarch64/platform_common.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <lib/xlat_tables/xlat_tables.h>
+#include <lib/mmio.h>
+#include <platform_def.h>
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return PLAT_SYS_COUNTER_FREQ_IN_TICKS;
+}
+
+unsigned long plat_get_ns_image_entrypoint(void)
+{
+	return PLAT_NS_IMAGE_OFFSET;
+}
+
+/******************************************************************************
+ * Gets SPSR for BL32 entry
+ *****************************************************************************/
+uint32_t plat_get_spsr_for_bl32_entry(void)
+{
+	/*
+	 * The Secure Payload Dispatcher service is responsible for
+	 * setting the SPSR prior to entry into the BL32 image.
+	 */
+	return 0;
+}
+
+/******************************************************************************
+ * Gets SPSR for BL33 entry
+ *****************************************************************************/
+uint32_t plat_get_spsr_for_bl33_entry(void)
+{
+	unsigned long el_status;
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+	el_status &= ID_AA64PFR0_ELX_MASK;
+
+	mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
diff --git a/plat/intel/soc/stratix10/aarch64/stratix10_private.h b/plat/intel/soc/stratix10/aarch64/stratix10_private.h
new file mode 100644
index 0000000..89851ef
--- /dev/null
+++ b/plat/intel/soc/stratix10/aarch64/stratix10_private.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __S10_PRIVATE_H__
+#define __S10_PRIVATE_H__
+
+#define S10_MMC_REG_BASE	0xff808000
+
+#define EMMC_DESC_SIZE		(1<<20)
+#define EMMC_INIT_PARAMS(base)			\
+	{	.bus_width = MMC_BUS_WIDTH_4,	\
+		.clk_rate = 50000000,		\
+		.desc_base = (base),		\
+		.desc_size = EMMC_DESC_SIZE,	\
+		.flags = 0,			\
+		.reg_base = S10_MMC_REG_BASE,	\
+		\
+	}
+
+typedef enum {
+	BOOT_SOURCE_FPGA = 0,
+	BOOT_SOURCE_SDMMC,
+	BOOT_SOURCE_NAND,
+	BOOT_SOURCE_RSVD,
+	BOOT_SOURCE_QSPI,
+} boot_source_type;
+
+void enable_nonsecure_access(void);
+void stratix10_io_setup(void);
+
+#endif
diff --git a/plat/intel/soc/stratix10/bl2_plat_mem_params_desc.c b/plat/intel/soc/stratix10/bl2_plat_mem_params_desc.c
new file mode 100644
index 0000000..4f75665
--- /dev/null
+++ b/plat/intel/soc/stratix10/bl2_plat_mem_params_desc.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/bl_common.h>
+#include <common/desc_image_load.h>
+#include <platform_def.h>
+#include <plat/common/platform.h>
+
+
+/*******************************************************************************
+ * Following descriptor provides BL image/ep information that gets used
+ * by BL2 to load the images and also subset of this information is
+ * passed to next BL image. The image loading sequence is managed by
+ * populating the images in required loading order. The image execution
+ * sequence is managed by populating the `next_handoff_image_id` with
+ * the next executable image id.
+ ******************************************************************************/
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+#ifdef SCP_BL2_BASE
+	/* Fill SCP_BL2 related information if it exists */
+	{
+	    .image_id = SCP_BL2_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, image_info_t, 0),
+	    .image_info.image_base = SCP_BL2_BASE,
+	    .image_info.image_max_size = SCP_BL2_SIZE,
+
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+#endif /* SCP_BL2_BASE */
+
+#ifdef EL3_PAYLOAD_BASE
+	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
+	{
+	    .image_id = BL31_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t,
+		    SECURE | EXECUTABLE | EP_FIRST_EXE),
+	    .ep_info.pc = EL3_PAYLOAD_BASE,
+	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+		    DISABLE_ALL_EXCEPTIONS),
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t,
+		    IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+
+#else /* EL3_PAYLOAD_BASE */
+
+	/* Fill BL31 related information */
+	{
+	    .image_id = BL31_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t,
+		    SECURE | EXECUTABLE | EP_FIRST_EXE),
+	    .ep_info.pc = BL31_BASE,
+	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+		    DISABLE_ALL_EXCEPTIONS),
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+	    .image_info.image_base = BL31_BASE,
+	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+
+	    .next_handoff_image_id = BL33_IMAGE_ID,
+	},
+#endif /* EL3_PAYLOAD_BASE */
+
+	{
+		.image_id = BL33_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+		.ep_info.pc = PLAT_NS_IMAGE_OFFSET,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = PLAT_NS_IMAGE_OFFSET,
+		.image_info.image_max_size =
+			0x0 + 0x40000000 - PLAT_NS_IMAGE_OFFSET,
+
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
diff --git a/plat/intel/soc/stratix10/bl2_plat_setup.c b/plat/intel/soc/stratix10/bl2_plat_setup.c
new file mode 100644
index 0000000..2b40eef
--- /dev/null
+++ b/plat/intel/soc/stratix10/bl2_plat_setup.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <drivers/arm/gicv2.h>
+
+#include <drivers/generic_delay_timer.h>
+#include <drivers/console.h>
+#include <drivers/ti/uart/uart_16550.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <errno.h>
+#include <drivers/io/io_storage.h>
+#include <common/image_decompress.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+#include <platform_private.h>
+#include <drivers/synopsys/dw_mmc.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables.h>
+
+#include "s10_memory_controller.h"
+#include "s10_reset_manager.h"
+#include "s10_clock_manager.h"
+#include "s10_handoff.h"
+#include "s10_pinmux.h"
+#include "aarch64/stratix10_private.h"
+
+const mmap_region_t plat_stratix10_mmap[] = {
+	MAP_REGION_FLAT(DRAM_BASE, DRAM_SIZE, MT_MEMORY | MT_RW | MT_NS),
+	MAP_REGION_FLAT(DEVICE1_BASE, DEVICE1_SIZE, MT_DEVICE | MT_RW | MT_NS),
+	MAP_REGION_FLAT(DEVICE2_BASE, DEVICE2_SIZE, MT_DEVICE | MT_RW | MT_NS),
+	MAP_REGION_FLAT(OCRAM_BASE, OCRAM_SIZE,
+		MT_NON_CACHEABLE | MT_RW | MT_SECURE),
+	MAP_REGION_FLAT(DEVICE3_BASE, DEVICE3_SIZE,
+		MT_DEVICE | MT_RW | MT_SECURE),
+	MAP_REGION_FLAT(MEM64_BASE, MEM64_SIZE, MT_DEVICE | MT_RW | MT_NS),
+	MAP_REGION_FLAT(DEVICE4_BASE, DEVICE4_SIZE, MT_DEVICE | MT_RW | MT_NS),
+	{0},
+};
+
+boot_source_type boot_source;
+
+void bl2_el3_early_platform_setup(u_register_t x0, u_register_t x1,
+				u_register_t x2, u_register_t x4)
+{
+	static console_16550_t console;
+	handoff reverse_handoff_ptr;
+
+	generic_delay_timer_init();
+
+	if (s10_get_handoff(&reverse_handoff_ptr))
+		return;
+	config_pinmux(&reverse_handoff_ptr);
+	boot_source = reverse_handoff_ptr.boot_source;
+
+	config_clkmgr_handoff(&reverse_handoff_ptr);
+	enable_nonsecure_access();
+	deassert_peripheral_reset();
+	config_hps_hs_before_warm_reset();
+
+	console_16550_register(PLAT_UART0_BASE, PLAT_UART_CLOCK, PLAT_BAUDRATE,
+		&console);
+
+	plat_delay_timer_init();
+	init_hard_memory_controller();
+}
+
+
+void bl2_el3_plat_arch_setup(void)
+{
+
+	struct mmc_device_info info;
+	const mmap_region_t bl_regions[] = {
+		MAP_REGION_FLAT(BL2_BASE, BL2_END - BL2_BASE,
+			MT_MEMORY | MT_RW | MT_SECURE),
+		MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE,
+			MT_CODE | MT_SECURE),
+		MAP_REGION_FLAT(BL_RO_DATA_BASE,
+			BL_RO_DATA_END - BL_RO_DATA_BASE,
+			MT_RO_DATA | MT_SECURE),
+#if USE_COHERENT_MEM_BAR
+		MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
+			BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
+			MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+		{0},
+	};
+
+	setup_page_tables(bl_regions, plat_stratix10_mmap);
+
+	enable_mmu_el3(0);
+
+	/* ECC Scrubbing */
+	memset(0, DRAM_BASE, DRAM_SIZE);
+
+	dw_mmc_params_t params = EMMC_INIT_PARAMS(0x100000);
+
+	info.mmc_dev_type = MMC_IS_SD;
+
+	switch (boot_source) {
+	case BOOT_SOURCE_SDMMC:
+		dw_mmc_init(&params, &info);
+		stratix10_io_setup();
+		break;
+	default:
+		ERROR("Unsupported boot source\n");
+		panic();
+		break;
+	}
+}
+
+uint32_t get_spsr_for_bl33_entry(void)
+{
+	unsigned long el_status;
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+	el_status &= ID_AA64PFR0_ELX_MASK;
+
+	mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+
+	switch (image_id) {
+	case BL33_IMAGE_ID:
+		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+		bl_mem_params->ep_info.spsr = get_spsr_for_bl33_entry();
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/*******************************************************************************
+ * Perform any BL3-1 platform setup code
+ ******************************************************************************/
+void bl2_platform_setup(void)
+{
+}
+
diff --git a/plat/intel/soc/stratix10/include/plat_macros.S b/plat/intel/soc/stratix10/include/plat_macros.S
new file mode 100644
index 0000000..667f6c8
--- /dev/null
+++ b/plat/intel/soc/stratix10/include/plat_macros.S
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLAT_MACROS_S__
+#define __PLAT_MACROS_S__
+
+#include <platform_def.h>
+
+	/* ---------------------------------------------
+	 * The below required platform porting macro
+	 * prints out relevant platform registers
+	 * whenever an unhandled exception is taken in
+	 * BL31.
+	 * ---------------------------------------------
+	 */
+	.macro plat_crash_print_regs
+	mov_imm	x17, PLAT_GICC_BASE
+	mov_imm	x16, PLAT_GICD_BASE
+	arm_print_gic_regs
+	.endm
+
+#endif /* __PLAT_MACROS_S__ */
diff --git a/plat/intel/soc/stratix10/include/platform_private.h b/plat/intel/soc/stratix10/include/platform_private.h
new file mode 100644
index 0000000..db0c103
--- /dev/null
+++ b/plat/intel/soc/stratix10/include/platform_private.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLATFORM_PRIVATE_H__
+#define __PLATFORM_PRIVATE_H__
+#include <common/bl_common.h>
+
+/*******************************************************************************
+ * Function and variable prototypes
+ ******************************************************************************/
+void plat_configure_mmu_el3(unsigned long total_base,
+			unsigned long total_size,
+			unsigned long ro_start,
+			unsigned long ro_limit,
+			unsigned long coh_start,
+			unsigned long coh_limit);
+
+
+void plat_configure_mmu_el1(unsigned long total_base,
+			unsigned long total_size,
+			unsigned long ro_start,
+			unsigned long ro_limit,
+			unsigned long coh_start,
+			unsigned long coh_limit);
+
+void plat_gic_driver_init(void);
+
+void plat_arm_gic_init(void);
+
+void plat_delay_timer_init(void);
+
+unsigned long plat_get_ns_image_entrypoint(void);
+
+uint32_t plat_get_spsr_for_bl32_entry(void);
+
+uint32_t plat_get_spsr_for_bl33_entry(void);
+
+#endif /* __PLATFORM_PRIVATE_H__ */
diff --git a/plat/intel/soc/stratix10/include/s10_clock_manager.h b/plat/intel/soc/stratix10/include/s10_clock_manager.h
new file mode 100644
index 0000000..28192fa
--- /dev/null
+++ b/plat/intel/soc/stratix10/include/s10_clock_manager.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __CLOCKMANAGER_H__
+#define __CLOCKMANAGER_H__
+
+#include "s10_handoff.h"
+
+#define ALT_CLKMGR				0xffd10000
+
+#define ALT_CLKMGR_CTRL				0x0
+#define ALT_CLKMGR_STAT				0x4
+#define ALT_CLKMGR_INTRCLR			0x14
+#define ALT_CLKMGR_INTRCLR_MAINLOCKLOST_SET_MSK	0x00000004
+#define ALT_CLKMGR_INTRCLR_PERLOCKLOST_SET_MSK	0x00000008
+
+#define ALT_CLKMGR_CTRL_BOOTMODE_SET_MSK	0x00000001
+#define ALT_CLKMGR_STAT_BUSY_E_BUSY		0x1
+#define ALT_CLKMGR_STAT_BUSY(x)			(((x) & 0x00000001) >> 0)
+#define ALT_CLKMGR_STAT_MAINPLLLOCKED(x)	(((x) & 0x00000100) >> 8)
+#define ALT_CLKMGR_STAT_PERPLLLOCKED(x)		(((x) & 0x00000200) >> 9)
+
+#define ALT_CLKMGR_MAINPLL			0xffd10030
+#define ALT_CLKMGR_MAINPLL_EN			0x0
+#define ALT_CLKMGR_MAINPLL_BYPASS		0xc
+#define ALT_CLKMGR_MAINPLL_MPUCLK		0x18
+#define ALT_CLKMGR_MAINPLL_NOCCLK		0x1c
+#define ALT_CLKMGR_MAINPLL_CNTR2CLK		0x20
+#define ALT_CLKMGR_MAINPLL_CNTR3CLK		0x24
+#define ALT_CLKMGR_MAINPLL_CNTR4CLK		0x28
+#define ALT_CLKMGR_MAINPLL_CNTR5CLK		0x2c
+#define ALT_CLKMGR_MAINPLL_CNTR6CLK		0x30
+#define ALT_CLKMGR_MAINPLL_CNTR7CLK		0x34
+#define ALT_CLKMGR_MAINPLL_CNTR8CLK		0x38
+#define ALT_CLKMGR_MAINPLL_CNTR9CLK		0x3c
+#define ALT_CLKMGR_MAINPLL_NOCDIV		0x40
+#define ALT_CLKMGR_MAINPLL_PLLGLOB		0x44
+#define ALT_CLKMGR_MAINPLL_FDBCK		0x48
+#define ALT_CLKMGR_MAINPLL_PLLC0		0x54
+#define ALT_CLKMGR_MAINPLL_PLLC1		0x58
+#define ALT_CLKMGR_MAINPLL_VCOCALIB		0x5c
+#define ALT_CLKMGR_MAINPLL_EN_RESET		0x000000ff
+#define ALT_CLKMGR_MAINPLL_FDBCK_MDIV(x)	(((x) & 0xff000000) >> 24)
+#define ALT_CLKMGR_MAINPLL_PLLGLOB_PD_SET_MSK	0x00000001
+#define ALT_CLKMGR_MAINPLL_PLLGLOB_REFCLKDIV(x)	(((x) & 0x00003f00) >> 8)
+#define ALT_CLKMGR_MAINPLL_PLLGLOB_RST_SET_MSK	0x00000002
+#define ALT_CLKMGR_MAINPLL_VCOCALIB_HSCNT_SET(x) (((x) << 0) & 0x000000ff)
+#define ALT_CLKMGR_MAINPLL_VCOCALIB_MSCNT_SET(x) (((x) << 9) & 0x0001fe00)
+
+#define ALT_CLKMGR_PERPLL			0xffd100a4
+#define ALT_CLKMGR_PERPLL_EN			0x0
+#define ALT_CLKMGR_PERPLL_BYPASS		0xc
+#define ALT_CLKMGR_PERPLL_CNTR2CLK		0x18
+#define ALT_CLKMGR_PERPLL_CNTR3CLK		0x1c
+#define ALT_CLKMGR_PERPLL_CNTR4CLK		0x20
+#define ALT_CLKMGR_PERPLL_CNTR5CLK		0x24
+#define ALT_CLKMGR_PERPLL_CNTR6CLK		0x28
+#define ALT_CLKMGR_PERPLL_CNTR7CLK		0x2c
+#define ALT_CLKMGR_PERPLL_CNTR8CLK		0x30
+#define ALT_CLKMGR_PERPLL_CNTR9CLK		0x34
+#define ALT_CLKMGR_PERPLL_GPIODIV		0x3c
+#define ALT_CLKMGR_PERPLL_EMACCTL		0x38
+#define ALT_CLKMGR_PERPLL_PLLGLOB		0x40
+#define ALT_CLKMGR_PERPLL_FDBCK			0x44
+#define ALT_CLKMGR_PERPLL_PLLC0			0x50
+#define ALT_CLKMGR_PERPLL_PLLC1			0x54
+#define ALT_CLKMGR_PERPLL_EN_RESET		0x00000fff
+#define ALT_CLKMGR_PERPLL_FDBCK_MDIV(x)		(((x) & 0xff000000) >> 24)
+#define ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK_SET(x) (((x) << 0) & 0x0000ffff)
+#define ALT_CLKMGR_PERPLL_PLLGLOB_PD_SET_MSK	0x00000001
+#define ALT_CLKMGR_PERPLL_PLLGLOB_REFCLKDIV(x)	(((x) & 0x00003f00) >> 8)
+#define ALT_CLKMGR_PERPLL_PLLGLOB_REFCLKDIV_SET(x) (((x) << 8) & 0x00003f00)
+#define ALT_CLKMGR_PERPLL_PLLGLOB_RST_SET_MSK	0x00000002
+#define ALT_CLKMGR_PERPLL_VCOCALIB_HSCNT_SET(x) (((x) << 0) & 0x000000ff)
+#define ALT_CLKMGR_PERPLL_VCOCALIB_MSCNT_SET(x) (((x) << 9) & 0x0001fe00)
+#define ALT_CLKMGR_PERPLL_VCOCALIB		0x58
+
+void config_clkmgr_handoff(handoff *hoff_ptr);
+
+#endif
diff --git a/plat/intel/soc/stratix10/include/s10_handoff.h b/plat/intel/soc/stratix10/include/s10_handoff.h
new file mode 100644
index 0000000..1cc8d09
--- /dev/null
+++ b/plat/intel/soc/stratix10/include/s10_handoff.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef	_HANDOFF_H_
+#define	_HANDOFF_H_
+
+#define HANDOFF_MAGIC_HEADER	0x424f4f54	/* BOOT */
+#define HANDOFF_MAGIC_PINMUX_SEL	0x504d5558	/* PMUX */
+#define HANDOFF_MAGIC_IOCTLR	0x494f4354	/* IOCT */
+#define HANDOFF_MAGIC_FPGA		0x46504741	/* FPGA */
+#define HANDOFF_MAGIC_IODELAY	0x444c4159	/* DLAY */
+#define HANDOFF_MAGIC_CLOCK		0x434c4b53	/* CLKS */
+#define HANDOFF_MAGIC_MISC		0x4d495343	/* MISC */
+
+typedef struct handoff_t {
+	/* header */
+	uint32_t	header_magic;
+	uint32_t	header_device;
+	uint32_t	_pad_0x08_0x10[2];
+
+	/* pinmux configuration - select */
+	uint32_t	pinmux_sel_magic;
+	uint32_t	pinmux_sel_length;
+	uint32_t	_pad_0x18_0x20[2];
+	uint32_t	pinmux_sel_array[96];	/* offset, value */
+
+	/* pinmux configuration - io control */
+	uint32_t	pinmux_io_magic;
+	uint32_t	pinmux_io_length;
+	uint32_t	_pad_0x1a8_0x1b0[2];
+	uint32_t	pinmux_io_array[96];	/* offset, value */
+
+	/* pinmux configuration - use fpga switch */
+	uint32_t	pinmux_fpga_magic;
+	uint32_t	pinmux_fpga_length;
+	uint32_t	_pad_0x338_0x340[2];
+	uint32_t	pinmux_fpga_array[42];	/* offset, value */
+	uint32_t	_pad_0x3e8_0x3f0[2];
+
+	/* pinmux configuration - io delay */
+	uint32_t	pinmux_delay_magic;
+	uint32_t	pinmux_delay_length;
+	uint32_t	_pad_0x3f8_0x400[2];
+	uint32_t	pinmux_iodelay_array[96];	/* offset, value */
+
+	/* clock configuration */
+	uint32_t	clock_magic;
+	uint32_t	clock_length;
+	uint32_t	_pad_0x588_0x590[2];
+	uint32_t	main_pll_mpuclk;
+	uint32_t	main_pll_nocclk;
+	uint32_t	main_pll_cntr2clk;
+	uint32_t	main_pll_cntr3clk;
+	uint32_t	main_pll_cntr4clk;
+	uint32_t	main_pll_cntr5clk;
+	uint32_t	main_pll_cntr6clk;
+	uint32_t	main_pll_cntr7clk;
+	uint32_t	main_pll_cntr8clk;
+	uint32_t	main_pll_cntr9clk;
+	uint32_t	main_pll_nocdiv;
+	uint32_t	main_pll_pllglob;
+	uint32_t	main_pll_fdbck;
+	uint32_t	main_pll_pllc0;
+	uint32_t	main_pll_pllc1;
+	uint32_t	_pad_0x5cc_0x5d0[1];
+	uint32_t	per_pll_cntr2clk;
+	uint32_t	per_pll_cntr3clk;
+	uint32_t	per_pll_cntr4clk;
+	uint32_t	per_pll_cntr5clk;
+	uint32_t	per_pll_cntr6clk;
+	uint32_t	per_pll_cntr7clk;
+	uint32_t	per_pll_cntr8clk;
+	uint32_t	per_pll_cntr9clk;
+	uint32_t	per_pll_emacctl;
+	uint32_t	per_pll_gpiodiv;
+	uint32_t	per_pll_pllglob;
+	uint32_t	per_pll_fdbck;
+	uint32_t	per_pll_pllc0;
+	uint32_t	per_pll_pllc1;
+	uint32_t	hps_osc_clk_h;
+	uint32_t	fpga_clk_hz;
+
+	/* misc configuration */
+	uint32_t	misc_magic;
+	uint32_t	misc_length;
+	uint32_t	_pad_0x618_0x620[2];
+	uint32_t	boot_source;
+} handoff;
+
+int verify_handoff_image(handoff *hoff_ptr, handoff *reverse_hoff_ptr);
+int s10_get_handoff(handoff *hoff_ptr);
+
+#endif
+
+
diff --git a/plat/intel/soc/stratix10/include/s10_memory_controller.h b/plat/intel/soc/stratix10/include/s10_memory_controller.h
new file mode 100644
index 0000000..f2a3e19
--- /dev/null
+++ b/plat/intel/soc/stratix10/include/s10_memory_controller.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __S10_MEMORYCONTROLLER_H__
+#define __S10_MEMORYCONTROLLER_H__
+
+#define S10_MPFE_IOHMC_REG_DRAMADDRW			0xf80100a8
+#define S10_MPFE_IOHMC_CTRLCFG0				0xf8010028
+#define S10_MPFE_IOHMC_CTRLCFG1				0xf801002c
+#define S10_MPFE_IOHMC_DRAMADDRW			0xf80100a8
+#define S10_MPFE_IOHMC_DRAMTIMING0			0xf8010050
+#define S10_MPFE_IOHMC_CALTIMING0			0xf801007c
+#define S10_MPFE_IOHMC_CALTIMING1			0xf8010080
+#define S10_MPFE_IOHMC_CALTIMING2			0xf8010084
+#define S10_MPFE_IOHMC_CALTIMING3			0xf8010088
+#define S10_MPFE_IOHMC_CALTIMING4			0xf801008c
+#define S10_MPFE_IOHMC_CALTIMING9			0xf80100a0
+#define S10_MPFE_IOHMC_CALTIMING9_ACT_TO_ACT(x) (((x) & 0x000000ff) >> 0)
+#define S10_MPFE_IOHMC_CTRLCFG1_CFG_ADDR_ORDER(value)	\
+						(((value) & 0x00000060) >> 5)
+
+#define S10_RSTMGR_BRGMODRST				0xffd1102c
+#define S10_RSTMGR_BRGMODRST_DDRSCH			0x00000040
+
+#define S10_MPFE_HMC_ADP_ECCCTRL1			0xf8011100
+#define S10_MPFE_HMC_ADP_ECCCTRL2			0xf8011104
+#define S10_MPFE_HMC_ADP_RSTHANDSHAKESTAT		0xf8011218
+#define S10_MPFE_HMC_ADP_RSTHANDSHAKESTAT_SEQ2CORE	0x000000ff
+#define S10_MPFE_HMC_ADP_RSTHANDSHAKECTRL		0xf8011214
+
+
+#define S10_MPFE_IOHMC_REG_CTRLCFG1			0xf801002c
+
+#define S10_MPFE_IOHMC_REG_NIOSRESERVE0_OFST		0xf8010110
+
+#define IOHMC_DRAMADDRW_COL_ADDR_WIDTH(x)	(((x) & 0x0000001f) >> 0)
+#define IOHMC_DRAMADDRW_ROW_ADDR_WIDTH(x)	(((x) & 0x000003e0) >> 5)
+#define IOHMC_DRAMADDRW_CS_ADDR_WIDTH(x)	(((x) & 0x00070000) >> 16)
+#define IOHMC_DRAMADDRW_BANK_GRP_ADDR_WIDTH(x)	(((x) & 0x0000c000) >> 14)
+#define IOHMC_DRAMADDRW_BANK_ADDR_WIDTH(x)	(((x) & 0x00003c00) >> 10)
+
+#define S10_MPFE_DDR(x)					(0xf8000000 + x)
+#define S10_MPFE_HMC_ADP_DDRCALSTAT			0xf801100c
+#define S10_MPFE_DDR_MAIN_SCHED				0xf8000400
+#define S10_MPFE_DDR_MAIN_SCHED_DDRCONF			0xf8000408
+#define S10_MPFE_DDR_MAIN_SCHED_DDRTIMING		0xf800040c
+#define S10_MPFE_DDR_MAIN_SCHED_DDRCONF_SET_MSK		0x0000001f
+#define S10_MPFE_DDR_MAIN_SCHED_DDRMODE			0xf8000410
+#define S10_MPFE_DDR_MAIN_SCHED_DEVTODEV		0xf800043c
+#define S10_MPFE_DDR_MAIN_SCHED_READLATENCY		0xf8000414
+#define S10_MPFE_DDR_MAIN_SCHED_ACTIVATE		0xf8000438
+#define S10_MPFE_DDR_MAIN_SCHED_ACTIVATE_FAWBANK_OFST	10
+#define S10_MPFE_DDR_MAIN_SCHED_ACTIVATE_FAW_OFST	4
+#define S10_MPFE_DDR_MAIN_SCHED_ACTIVATE_RRD_OFST	0
+#define S10_MPFE_DDR_MAIN_SCHED_DDRCONF_SET(x)	(((x) << 0) & 0x0000001f)
+#define S10_MPFE_DDR_MAIN_SCHED_DEVTODEV_BUSRDTORD_OFST	0
+#define S10_MPFE_DDR_MAIN_SCHED_DEVTODEV_BUSRDTOWR_OFST	2
+#define S10_MPFE_DDR_MAIN_SCHED_DEVTODEV_BUSWRTORD_OFST	4
+
+#define S10_MPFE_HMC_ADP(x)			(0xf8011000 + (x))
+#define S10_MPFE_HMC_ADP_HPSINTFCSEL		0xf8011210
+#define S10_MPFE_HMC_ADP_DDRIOCTRL		0xf8011008
+#define HMC_ADP_DDRIOCTRL			0x8
+#define HMC_ADP_DDRIOCTRL_IO_SIZE(x)		(((x) & 0x00000003) >> 0)
+#define HMC_ADP_DDRIOCTRL_CTRL_BURST_LENGTH(x)	(((x) & 0x00003e00) >> 9)
+#define ADP_DRAMADDRWIDTH			0xe0
+
+#define ACT_TO_ACT_DIFF_BANK(value) (((value) & 0x00fc0000) >> 18)
+#define ACT_TO_ACT(value) (((value) & 0x0003f000) >> 12)
+#define ACT_TO_RDWR(value) (((value) & 0x0000003f) >> 0)
+#define ACT_TO_ACT(value) (((value) & 0x0003f000) >> 12)
+
+/* timing 2 */
+#define RD_TO_RD_DIFF_CHIP(value) (((value) & 0x00000fc0) >> 6)
+#define RD_TO_WR_DIFF_CHIP(value) (((value) & 0x3f000000) >> 24)
+#define RD_TO_WR(value) (((value) & 0x00fc0000) >> 18)
+#define RD_TO_PCH(value) (((value) & 0x00000fc0) >> 6)
+
+/* timing 3 */
+#define CALTIMING3_WR_TO_RD_DIFF_CHIP(value) (((value) & 0x0003f000) >> 12)
+#define CALTIMING3_WR_TO_RD(value) (((value) & 0x00000fc0) >> 6)
+
+/* timing 4 */
+#define PCH_TO_VALID(value) (((value) & 0x00000fc0) >> 6)
+
+#define DDRTIMING_BWRATIO_OFST		31
+#define DDRTIMING_WRTORD_OFST			26
+#define DDRTIMING_RDTOWR_OFST			21
+#define DDRTIMING_BURSTLEN_OFST		18
+#define DDRTIMING_WRTOMISS_OFST		12
+#define DDRTIMING_RDTOMISS_OFST		6
+#define DDRTIMING_ACTTOACT_OFST		0
+
+#define ADP_DDRIOCTRL_IO_SIZE(x)	(((x) & 0x00000003) >> 0)
+
+#define DDRMODE_AUTOPRECHARGE_OFST 1
+#define DDRMODE_BWRATIOEXTENDED_OFST 0
+
+
+#define S10_MPFE_IOHMC_REG_DRAMTIMING0_CFG_TCL(x) (((x) & 0x0000007f) >> 0)
+#define S10_MPFE_IOHMC_REG_CTRLCFG0_CFG_MEM_TYPE(x) (((x) & 0x0000000f) >> 0)
+
+#define S10_CCU_CPU0_MPRT_DDR		0xf7004400
+#define S10_CCU_CPU0_MPRT_MEM0		0xf70045c0
+#define S10_CCU_CPU0_MPRT_MEM1A		0xf70045e0
+#define S10_CCU_CPU0_MPRT_MEM1B		0xf7004600
+#define S10_CCU_CPU0_MPRT_MEM1C		0xf7004620
+#define S10_CCU_CPU0_MPRT_MEM1D		0xf7004640
+#define S10_CCU_CPU0_MPRT_MEM1E		0xf7004660
+#define S10_CCU_IOM_MPRT_MEM0		0xf7018560
+#define S10_CCU_IOM_MPRT_MEM1A		0xf7018580
+#define	S10_CCU_IOM_MPRT_MEM1B		0xf70185a0
+#define	S10_CCU_IOM_MPRT_MEM1C		0xf70185c0
+#define	S10_CCU_IOM_MPRT_MEM1D		0xf70185e0
+#define	S10_CCU_IOM_MPRT_MEM1E		0xf7018600
+
+#define S10_NOC_FW_DDR_SCR				0xf8020100
+#define S10_NOC_FW_DDR_SCR_MPUREGION0ADDR_LIMITEXT	0xf802011c
+#define S10_NOC_FW_DDR_SCR_MPUREGION0ADDR_LIMIT		0xf8020118
+#define S10_NOC_FW_DDR_SCR_NONMPUREGION0ADDR_LIMITEXT	0xf802019c
+#define S10_NOC_FW_DDR_SCR_NONMPUREGION0ADDR_LIMIT	0xf8020198
+
+#define S10_SOC_NOC_FW_DDR_SCR_ENABLE			0xf8020100
+#define S10_CCU_NOC_DI_SET_MSK			0x10
+
+#define S10_SYSMGR_CORE_HMC_CLK			0xffd120b4
+#define S10_SYSMGR_CORE_HMC_CLK_STATUS		0x00000001
+
+#define S10_MPFE_IOHMC_NIOSRESERVE0_NIOS_RESERVE0(x) (((x) & 0x0000ffff) >> 0)
+#define S10_MPFE_HMC_ADP_DDRIOCTRL_IO_SIZE_MSK    0x00000003
+#define S10_MPFE_HMC_ADP_DDRIOCTRL_IO_SIZE_OFST    0
+#define S10_MPFE_HMC_ADP_HPSINTFCSEL_ENABLE 0x001f1f1f
+#define S10_IOHMC_CTRLCFG1_ENABLE_ECC_OFST 7
+
+#define S10_MPFE_HMC_ADP_ECCCTRL1_AUTOWB_CNT_RST_SET_MSK    0x00010000
+#define S10_MPFE_HMC_ADP_ECCCTRL1_CNT_RST_SET_MSK    0x00000100
+#define S10_MPFE_HMC_ADP_ECCCTRL1_ECC_EN_SET_MSK    0x00000001
+
+#define S10_MPFE_HMC_ADP_ECCCTRL2_AUTOWB_EN_SET_MSK    0x00000001
+#define S10_MPFE_HMC_ADP_ECCCTRL2_OVRW_RB_ECC_EN_SET_MSK    0x00010000
+#define S10_MPFE_HMC_ADP_ECCCTRL2_RMW_EN_SET_MSK    0x00000100
+#define S10_MPFE_HMC_ADP_DDRCALSTAT_CAL(value) (((value) & 0x00000001) >> 0)
+
+
+#define S10_MPFE_HMC_ADP_DDRIOCTRL_IO_SIZE(x)	(((x) & 0x00000003) >> 0)
+#define IOHMC_DRAMADDRW_CFG_BANK_ADDR_WIDTH(x) (((x) & 0x00003c00) >> 10)
+#define IOHMC_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH(x) (((x) & 0x0000c000) >> 14)
+#define IOHMC_DRAMADDRW_CFG_COL_ADDR_WIDTH(x) (((x) & 0x0000001f) >> 0)
+#define IOHMC_DRAMADDRW_CFG_CS_ADDR_WIDTH(x) (((x) & 0x00070000) >> 16)
+#define IOHMC_DRAMADDRW_CFG_ROW_ADDR_WIDTH(x) (((x) & 0x000003e0) >> 5)
+
+#define S10_SDRAM_0_LB_ADDR 0x0
+
+int init_hard_memory_controller(void);
+
+#endif
diff --git a/plat/intel/soc/stratix10/include/s10_noc.h b/plat/intel/soc/stratix10/include/s10_noc.h
new file mode 100644
index 0000000..3e1e527
--- /dev/null
+++ b/plat/intel/soc/stratix10/include/s10_noc.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#define AXI_AP				(1<<0)
+#define FPGA2SOC			(1<<16)
+#define MPU				(1<<24)
+#define S10_NOC_PER_SCR_NAND		0xffd21000
+#define S10_NOC_PER_SCR_NAND_DATA	0xffd21004
+#define S10_NOC_PER_SCR_USB0		0xffd2100c
+#define S10_NOC_PER_SCR_USB1		0xffd21010
+#define S10_NOC_PER_SCR_SPI_M0		0xffd2101c
+#define S10_NOC_PER_SCR_SPI_M1		0xffd21020
+#define S10_NOC_PER_SCR_SPI_S0		0xffd21024
+#define S10_NOC_PER_SCR_SPI_S1		0xffd21028
+#define S10_NOC_PER_SCR_EMAC0		0xffd2102c
+#define S10_NOC_PER_SCR_EMAC1		0xffd21030
+#define S10_NOC_PER_SCR_EMAC2		0xffd21034
+#define S10_NOC_PER_SCR_SDMMC		0xffd21040
+#define S10_NOC_PER_SCR_GPIO0		0xffd21044
+#define S10_NOC_PER_SCR_GPIO1		0xffd21048
+#define S10_NOC_PER_SCR_I2C0		0xffd21050
+#define S10_NOC_PER_SCR_I2C1		0xffd21058
+#define S10_NOC_PER_SCR_I2C2		0xffd2105c
+#define S10_NOC_PER_SCR_I2C3		0xffd21060
+#define S10_NOC_PER_SCR_SP_TIMER0	0xffd21064
+#define S10_NOC_PER_SCR_SP_TIMER1	0xffd21068
+#define S10_NOC_PER_SCR_UART0		0xffd2106c
+#define S10_NOC_PER_SCR_UART1		0xffd21070
+
+
+#define S10_NOC_SYS_SCR_DMA_ECC			0xffd21108
+#define S10_NOC_SYS_SCR_EMAC0RX_ECC		0xffd2110c
+#define S10_NOC_SYS_SCR_EMAC0TX_ECC		0xffd21110
+#define S10_NOC_SYS_SCR_EMAC1RX_ECC		0xffd21114
+#define S10_NOC_SYS_SCR_EMAC1TX_ECC		0xffd21118
+#define S10_NOC_SYS_SCR_EMAC2RX_ECC		0xffd2111c
+#define S10_NOC_SYS_SCR_EMAC2TX_ECC		0xffd21120
+#define S10_NOC_SYS_SCR_NAND_ECC		0xffd2112c
+#define S10_NOC_SYS_SCR_NAND_READ_ECC		0xffd21130
+#define S10_NOC_SYS_SCR_NAND_WRITE_ECC		0xffd21134
+#define S10_NOC_SYS_SCR_OCRAM_ECC		0xffd21138
+#define S10_NOC_SYS_SCR_SDMMC_ECC		0xffd21140
+#define S10_NOC_SYS_SCR_USB0_ECC		0xffd21144
+#define S10_NOC_SYS_SCR_USB1_ECC		0xffd21148
+#define S10_NOC_SYS_SCR_CLK_MGR			0xffd2114c
+#define S10_NOC_SYS_SCR_IO_MGR			0xffd21154
+#define S10_NOC_SYS_SCR_RST_MGR			0xffd21158
+#define S10_NOC_SYS_SCR_SYS_MGR			0xffd2115c
+#define S10_NOC_SYS_SCR_OSC0_TIMER		0xffd21160
+#define S10_NOC_SYS_SCR_OSC1_TIMER		0xffd21164
+#define S10_NOC_SYS_SCR_WATCHDOG0		0xffd21168
+#define S10_NOC_SYS_SCR_WATCHDOG1		0xffd2116c
+#define S10_NOC_SYS_SCR_WATCHDOG2		0xffd21170
+#define S10_NOC_SYS_SCR_WATCHDOG3		0xffd21174
+#define S10_NOC_SYS_SCR_DAP			0xffd21178
+#define S10_NOC_SYS_SCR_L4_NOC_PROBES		0xffd21190
+#define S10_NOC_SYS_SCR_L4_NOC_QOS		0xffd21194
+
+#define S10_CCU_NOC_BRIDGE_CPU0_RAM		0xf7004688
+#define S10_CCU_NOC_BRIDGE_IOM_RAM		0xf7004688
diff --git a/plat/intel/soc/stratix10/include/s10_pinmux.h b/plat/intel/soc/stratix10/include/s10_pinmux.h
new file mode 100644
index 0000000..a1ba29e
--- /dev/null
+++ b/plat/intel/soc/stratix10/include/s10_pinmux.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __S10_PINMUX_H__
+#define __S10_PINMUX_H__
+
+#define S10_PINMUX_PIN0SEL		0xffd13000
+#define S10_PINMUX_IO0CTRL		0xffd13130
+#define S10_PINMUX_PINMUX_EMAC0_USEFPGA	0xffd13300
+#define S10_PINMUX_IO0_DELAY		0xffd13400
+
+#include "s10_handoff.h"
+
+void config_pinmux(handoff *handoff);
+
+#endif
+
diff --git a/plat/intel/soc/stratix10/include/s10_reset_manager.h b/plat/intel/soc/stratix10/include/s10_reset_manager.h
new file mode 100644
index 0000000..731a8dd
--- /dev/null
+++ b/plat/intel/soc/stratix10/include/s10_reset_manager.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __S10_RESETMANAGER_H__
+#define __S10_RESETMANAGER_H__
+
+#define S10_RSTMGR_PER0MODRST				0xffd11024
+#define S10_RSTMGR_PER1MODRST				0xffd11028
+#define S10_RSTMGR_HDSKEN					0xffd11010
+
+#define S10_RSTMGR_PER0MODRST_EMAC0			0x00000001
+#define S10_RSTMGR_PER0MODRST_EMAC1			0x00000002
+#define S10_RSTMGR_PER0MODRST_EMAC2			0x00000004
+#define S10_RSTMGR_PER0MODRST_EMAC0OCP		0x00000100
+#define S10_RSTMGR_PER0MODRST_EMAC1OCP		0x00000200
+#define S10_RSTMGR_PER0MODRST_DMAOCP		0x00200000
+#define S10_RSTMGR_PER0MODRST_DMA			0x00010000
+#define S10_RSTMGR_PER0MODRST_EMAC0			0x00000001
+#define S10_RSTMGR_PER0MODRST_EMAC1			0x00000002
+#define S10_RSTMGR_PER0MODRST_EMAC2OCP		0x00000400
+#define S10_RSTMGR_PER0MODRST_EMAC2			0x00000004
+#define S10_RSTMGR_PER0MODRST_EMACPTP		0x00400000
+#define S10_RSTMGR_PER0MODRST_NANDOCP		0x00002000
+#define S10_RSTMGR_PER0MODRST_NAND			0x00000020
+#define S10_RSTMGR_PER0MODRST_SDMMCOCP		0x00008000
+#define S10_RSTMGR_PER0MODRST_SDMMC			0x00000080
+#define S10_RSTMGR_PER0MODRST_SPIM0			0x00020000
+#define S10_RSTMGR_PER0MODRST_SPIM1			0x00040000
+#define S10_RSTMGR_PER0MODRST_SPIS0			0x00080000
+#define S10_RSTMGR_PER0MODRST_SPIS1			0x00100000
+#define S10_RSTMGR_PER0MODRST_USB0OCP		0x00000800
+#define S10_RSTMGR_PER0MODRST_USB0			0x00000008
+#define S10_RSTMGR_PER0MODRST_USB1OCP		0x00001000
+#define S10_RSTMGR_PER0MODRST_USB1			0x00000010
+
+#define S10_RSTMGR_PER1MODRST_WATCHDOG0		0x1
+#define S10_RSTMGR_PER1MODRST_WATCHDOG1		0x2
+#define S10_RSTMGR_PER1MODRST_WATCHDOG2		0x4
+#define S10_RSTMGR_PER1MODRST_WATCHDOG3		0x8
+#define S10_RSTMGR_PER1MODRST_GPIO0			0x01000000
+#define S10_RSTMGR_PER1MODRST_GPIO0			0x01000000
+#define S10_RSTMGR_PER1MODRST_GPIO1			0x02000000
+#define S10_RSTMGR_PER1MODRST_GPIO1			0x02000000
+#define S10_RSTMGR_PER1MODRST_I2C0			0x00000100
+#define S10_RSTMGR_PER1MODRST_I2C0			0x00000100
+#define S10_RSTMGR_PER1MODRST_I2C1			0x00000200
+#define S10_RSTMGR_PER1MODRST_I2C1			0x00000200
+#define S10_RSTMGR_PER1MODRST_I2C2			0x00000400
+#define S10_RSTMGR_PER1MODRST_I2C2			0x00000400
+#define S10_RSTMGR_PER1MODRST_I2C3			0x00000800
+#define S10_RSTMGR_PER1MODRST_I2C3			0x00000800
+#define S10_RSTMGR_PER1MODRST_I2C4			0x00001000
+#define S10_RSTMGR_PER1MODRST_I2C4			0x00001000
+#define S10_RSTMGR_PER1MODRST_L4SYSTIMER0	0x00000010
+#define S10_RSTMGR_PER1MODRST_L4SYSTIMER1	0x00000020
+#define S10_RSTMGR_PER1MODRST_SPTIMER0		0x00000040
+#define S10_RSTMGR_PER1MODRST_SPTIMER0		0x00000040
+#define S10_RSTMGR_PER1MODRST_SPTIMER1		0x00000080
+#define S10_RSTMGR_PER1MODRST_SPTIMER1		0x00000080
+#define S10_RSTMGR_PER1MODRST_UART0			0x00010000
+#define S10_RSTMGR_PER1MODRST_UART0			0x00010000
+#define S10_RSTMGR_PER1MODRST_UART1			0x00020000
+#define S10_RSTMGR_PER1MODRST_UART1			0x00020000
+#define S10_RSTMGR_HDSKEN_DEBUG_L3NOC		0x00020000
+#define S10_RSTMGR_HDSKEN_ETRSTALLEN		0x00000008
+#define S10_RSTMGR_HDSKEN_FPGAHSEN			0x00000004
+#define S10_RSTMGR_HDSKEN_L2FLUSHEN			0x00000100
+#define S10_RSTMGR_HDSKEN_L3NOC_DBG			0x00010000
+
+#define S10_RSTMGR_HDSKEN_SDRSELFREFEN		0x00000001
+#define S10_RSTMGR_PER0MODRST_DMAIF0		0x01000000
+#define S10_RSTMGR_PER0MODRST_DMAIF1		0x02000000
+#define S10_RSTMGR_PER0MODRST_DMAIF2		0x04000000
+#define S10_RSTMGR_PER0MODRST_DMAIF3		0x08000000
+#define S10_RSTMGR_PER0MODRST_DMAIF4		0x10000000
+#define S10_RSTMGR_PER0MODRST_DMAIF5		0x20000000
+#define S10_RSTMGR_PER0MODRST_DMAIF6		0x40000000
+#define S10_RSTMGR_PER0MODRST_DMAIF7		0x80000000
+
+void deassert_peripheral_reset(void);
+void config_hps_hs_before_warm_reset(void);
+
+#endif
+
diff --git a/plat/intel/soc/stratix10/include/s10_system_manager.h b/plat/intel/soc/stratix10/include/s10_system_manager.h
new file mode 100644
index 0000000..802386c
--- /dev/null
+++ b/plat/intel/soc/stratix10/include/s10_system_manager.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#define S10_NOC_FW_L4_PER_SCR_NAND_REGISTER	0xffd21000
+#define S10_NOC_FW_L4_PER_SCR_NAND_DATA		0xffd21004
+#define S10_NOC_FW_L4_PER_SCR_USB0_REGISTER	0xffd2100c
+#define S10_NOC_FW_L4_PER_SCR_USB1_REGISTER	0xffd21010
+#define S10_NOC_FW_L4_PER_SCR_SPI_MASTER0	0xffd2101c
+#define S10_NOC_FW_L4_PER_SCR_SPI_MASTER1	0xffd21020
+#define S10_NOC_FW_L4_PER_SCR_SPI_SLAVE0	0xffd21024
+#define S10_NOC_FW_L4_PER_SCR_SPI_SLAVE1	0xffd21028
+#define S10_NOC_FW_L4_PER_SCR_EMAC0		0xffd2102c
+#define S10_NOC_FW_L4_PER_SCR_EMAC1		0xffd21030
+#define S10_NOC_FW_L4_PER_SCR_EMAC2		0xffd21034
+#define S10_NOC_FW_L4_PER_SCR_SDMMC		0xffd21040
+#define S10_NOC_FW_L4_PER_SCR_GPIO0		0xffd21044
+#define S10_NOC_FW_L4_PER_SCR_GPIO1		0xffd21048
+#define S10_NOC_FW_L4_PER_SCR_I2C0		0xffd21050
+#define S10_NOC_FW_L4_PER_SCR_I2C1		0xffd21054
+#define S10_NOC_FW_L4_PER_SCR_I2C2		0xffd21058
+#define S10_NOC_FW_L4_PER_SCR_I2C3		0xffd2105c
+#define S10_NOC_FW_L4_PER_SCR_I2C4		0xffd21060
+#define S10_NOC_FW_L4_PER_SCR_SP_TIMER0		0xffd21064
+#define S10_NOC_FW_L4_PER_SCR_SP_TIMER1		0xffd21068
+#define S10_NOC_FW_L4_PER_SCR_UART0		0xffd2106c
+#define S10_NOC_FW_L4_PER_SCR_UART1		0xffd21070
+
+#define S10_NOC_FW_L4_SYS_SCR_DMA_ECC		0xffd21108
+#define S10_NOC_FW_L4_SYS_SCR_EMAC0RX_ECC	0xffd2110c
+#define S10_NOC_FW_L4_SYS_SCR_EMAC0TX_ECC	0xffd21110
+#define S10_NOC_FW_L4_SYS_SCR_EMAC1RX_ECC	0xffd21114
+#define S10_NOC_FW_L4_SYS_SCR_EMAC1TX_ECC	0xffd21118
+#define S10_NOC_FW_L4_SYS_SCR_EMAC2RX_ECC	0xffd2111c
+#define S10_NOC_FW_L4_SYS_SCR_EMAC2TX_ECC	0xffd21120
+#define S10_NOC_FW_L4_SYS_SCR_NAND_ECC		0xffd2112c
+#define S10_NOC_FW_L4_SYS_SCR_NAND_READ_ECC	0xffd21130
+#define S10_NOC_FW_L4_SYS_SCR_NAND_WRITE_ECC	0xffd21134
+#define S10_NOC_FW_L4_SYS_SCR_OCRAM_ECC		0xffd21138
+#define S10_NOC_FW_L4_SYS_SCR_SDMMC_ECC		0xffd21140
+#define S10_NOC_FW_L4_SYS_SCR_USB0_ECC		0xffd21144
+#define S10_NOC_FW_L4_SYS_SCR_USB1_ECC		0xffd21148
+#define S10_NOC_FW_L4_SYS_SCR_CLK_MGR		0xffd2114c
+#define S10_NOC_FW_L4_SYS_SCR_IO_MGR		0xffd21154
+#define S10_NOC_FW_L4_SYS_SCR_RST_MGR		0xffd21158
+#define S10_NOC_FW_L4_SYS_SCR_SYS_MGR		0xffd2115c
+#define S10_NOC_FW_L4_SYS_SCR_OSC0_TIMER	0xffd21160
+#define S10_NOC_FW_L4_SYS_SCR_OSC1_TIMER	0xffd21164
+#define S10_NOC_FW_L4_SYS_SCR_WATCHDOG0		0xffd21168
+#define S10_NOC_FW_L4_SYS_SCR_WATCHDOG1		0xffd2116c
+#define S10_NOC_FW_L4_SYS_SCR_WATCHDOG2		0xffd21170
+#define S10_NOC_FW_L4_SYS_SCR_WATCHDOG3		0xffd21174
+#define S10_NOC_FW_L4_SYS_SCR_DAP		0xffd21178
+#define S10_NOC_FW_L4_SYS_SCR_L4_NOC_PROBES	0xffd21190
+#define S10_NOC_FW_L4_SYS_SCR_L4_NOC_QOS	0xffd21194
+
+#define S10_CCU_NOC_CPU0_RAMSPACE0_0		0xf7004688
+#define S10_CCU_NOC_IOM_RAMSPACE0_0		0xf7018628
+
+#define DISABLE_L4_FIREWALL	(BIT(0) | BIT(16) | BIT(24))
+
+void enable_nonsecure_access(void);
+
diff --git a/plat/intel/soc/stratix10/plat_delay_timer.c b/plat/intel/soc/stratix10/plat_delay_timer.c
new file mode 100644
index 0000000..bf68cbc
--- /dev/null
+++ b/plat/intel/soc/stratix10/plat_delay_timer.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <arch_helpers.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#define S10_GLOBAL_TIMER	0xffd01000
+#define S10_GLOBAL_TIMER_EN	0x3
+
+/********************************************************************
+ * The timer delay function
+ ********************************************************************/
+static uint32_t plat_get_timer_value(void)
+{
+	/*
+	 * Generic delay timer implementation expects the timer to be a down
+	 * counter. We apply bitwise NOT operator to the tick values returned
+	 * by read_cntpct_el0() to simulate the down counter. The value is
+	 * clipped from 64 to 32 bits.
+	 */
+	return (uint32_t)(~read_cntpct_el0());
+}
+
+static const timer_ops_t plat_timer_ops = {
+	.get_timer_value    = plat_get_timer_value,
+	.clk_mult           = 1,
+	.clk_div	    = PLAT_SYS_COUNTER_FREQ_IN_MHZ,
+};
+
+void plat_delay_timer_init(void)
+{
+	timer_init(&plat_timer_ops);
+	mmio_write_32(S10_GLOBAL_TIMER, S10_GLOBAL_TIMER_EN);
+}
diff --git a/plat/intel/soc/stratix10/plat_storage.c b/plat/intel/soc/stratix10/plat_storage.c
new file mode 100644
index 0000000..cedcf1e
--- /dev/null
+++ b/plat/intel/soc/stratix10/plat_storage.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <common/debug.h>
+#include <drivers/mmc.h>
+#include <tools_share/firmware_image_package.h>
+#include <drivers/io/io_block.h>
+#include <drivers/io/io_driver.h>
+#include <drivers/io/io_fip.h>
+#include <drivers/io/io_memmap.h>
+#include <drivers/io/io_storage.h>
+#include <lib/mmio.h>
+#include <drivers/partition/partition.h>
+#include <lib/semihosting.h>
+#include <string.h>
+#include <lib/utils.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include "platform_def.h"
+
+#define STRATIX10_FIP_BASE	(0)
+#define STRATIX10_FIP_MAX_SIZE	(0x1000000)
+#define STRATIX10_MMC_DATA_BASE	(0xffe3c000)
+#define STRATIX10_MMC_DATA_SIZE	(0x2000)
+
+static const io_dev_connector_t *mmc_dev_con;
+static const io_dev_connector_t *fip_dev_con;
+
+static uintptr_t fip_dev_handle;
+static uintptr_t mmc_dev_handle;
+
+static const io_uuid_spec_t bl2_uuid_spec = {
+	.uuid = UUID_TRUSTED_BOOT_FIRMWARE_BL2,
+};
+
+static const io_uuid_spec_t bl31_uuid_spec = {
+	.uuid = UUID_EL3_RUNTIME_FIRMWARE_BL31,
+};
+
+static const io_uuid_spec_t bl33_uuid_spec = {
+	.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
+};
+
+uintptr_t a2_lba_offset;
+
+static const io_block_spec_t gpt_block_spec = {
+	.offset = 0,
+	.length = MMC_BLOCK_SIZE
+};
+
+static int check_mmc(const uintptr_t spec);
+static int check_fip(const uintptr_t spec);
+
+static io_block_spec_t mmc_fip_spec = {
+	.offset		= STRATIX10_FIP_BASE,
+	.length		= STRATIX10_FIP_MAX_SIZE,
+};
+
+const char a2[] = {0xa2, 0x0};
+
+static const io_block_dev_spec_t mmc_dev_spec = {
+	.buffer	= {
+		.offset = STRATIX10_MMC_DATA_BASE,
+		.length = MMC_BLOCK_SIZE,
+	},
+
+	.ops	= {
+		.read	= mmc_read_blocks,
+		.write	= mmc_write_blocks,
+	},
+
+	.block_size = MMC_BLOCK_SIZE,
+};
+
+struct plat_io_policy {
+	uintptr_t	*dev_handle;
+	uintptr_t	image_spec;
+	int		(*check)(const uintptr_t spec);
+};
+
+static const struct plat_io_policy policies[] = {
+	[FIP_IMAGE_ID] = {
+		&mmc_dev_handle,
+		(uintptr_t)&mmc_fip_spec,
+		check_mmc
+	},
+	[BL2_IMAGE_ID] = {
+	  &fip_dev_handle,
+	  (uintptr_t)&bl2_uuid_spec,
+	  check_fip
+	},
+	[BL31_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl31_uuid_spec,
+		check_fip
+	},
+	[BL33_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t) &bl33_uuid_spec,
+		check_fip
+	},
+	[GPT_IMAGE_ID] = {
+		&mmc_dev_handle,
+		(uintptr_t) &gpt_block_spec,
+		check_mmc
+	},
+};
+
+static int check_mmc(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_handle;
+
+	result = io_dev_init(mmc_dev_handle, (uintptr_t)NULL);
+	if (result == 0) {
+		result = io_open(mmc_dev_handle, spec, &local_handle);
+		if (result == 0)
+			io_close(local_handle);
+	}
+	return result;
+}
+
+static int check_fip(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID);
+	if (result == 0) {
+		result = io_open(fip_dev_handle, spec, &local_image_handle);
+		if (result == 0)
+			io_close(local_image_handle);
+	}
+	return result;
+}
+
+void stratix10_io_setup(void)
+{
+	int result;
+
+	result = register_io_dev_block(&mmc_dev_con);
+	assert(result == 0);
+
+	result = register_io_dev_fip(&fip_dev_con);
+	assert(result == 0);
+
+	result = io_dev_open(mmc_dev_con, (uintptr_t)&mmc_dev_spec,
+			&mmc_dev_handle);
+	assert(result == 0);
+
+	result = io_dev_open(fip_dev_con, (uintptr_t)NULL, &fip_dev_handle);
+	assert(result == 0);
+
+	partition_init(GPT_IMAGE_ID);
+
+	mmc_fip_spec.offset = get_partition_entry(a2)->start;
+
+	(void)result;
+}
+
+int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
+			uintptr_t *image_spec)
+{
+	int result;
+	const struct plat_io_policy *policy;
+
+	assert(image_id < ARRAY_SIZE(policies));
+
+	policy = &policies[image_id];
+	result = policy->check(policy->image_spec);
+	assert(result == 0);
+
+	*image_spec = policy->image_spec;
+	*dev_handle = *(policy->dev_handle);
+
+	return result;
+}
diff --git a/plat/intel/soc/stratix10/platform.mk b/plat/intel/soc/stratix10/platform.mk
new file mode 100644
index 0000000..01b0c76
--- /dev/null
+++ b/plat/intel/soc/stratix10/platform.mk
@@ -0,0 +1,53 @@
+#
+# Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+PLAT_INCLUDES		:=	\
+			-Iplat/intel/soc/stratix10/			\
+			-Iplat/intel/soc/stratix10/include/		\
+
+PLAT_BL_COMMON_SOURCES	:=	\
+			lib/xlat_tables/xlat_tables_common.c 		\
+			lib/xlat_tables/aarch64/xlat_tables.c 		\
+			drivers/arm/gic/common/gic_common.c		\
+			drivers/arm/gic/v2/gicv2_main.c			\
+			drivers/arm/gic/v2/gicv2_helpers.c		\
+			plat/common/plat_gicv2.c				\
+			drivers/delay_timer/delay_timer.c		\
+			drivers/delay_timer/generic_delay_timer.c  	\
+			drivers/ti/uart/aarch64/16550_console.S		\
+			plat/intel/soc/stratix10/aarch64/platform_common.c \
+			plat/intel/soc/stratix10/aarch64/plat_helpers.S \
+
+BL2_SOURCES     +=	\
+		drivers/partition/partition.c				\
+		drivers/partition/gpt.c					\
+		drivers/arm/pl061/pl061_gpio.c				\
+		drivers/mmc/mmc.c					\
+		drivers/synopsys/emmc/dw_mmc.c				\
+		drivers/io/io_storage.c					\
+		drivers/io/io_block.c					\
+		drivers/io/io_fip.c					\
+		drivers/gpio/gpio.c					\
+		drivers/io/io_memmap.c					\
+		plat/intel/soc/stratix10/bl2_plat_setup.c		\
+		plat/intel/soc/stratix10/plat_storage.c			\
+                plat/intel/soc/stratix10/bl2_plat_mem_params_desc.c	\
+		plat/intel/soc/stratix10/soc/s10_reset_manager.c	\
+		plat/intel/soc/stratix10/soc/s10_handoff.c		\
+		plat/intel/soc/stratix10/soc/s10_clock_manager.c	\
+		plat/intel/soc/stratix10/soc/s10_pinmux.c		\
+		plat/intel/soc/stratix10/soc/s10_memory_controller.c	\
+		plat/intel/soc/stratix10/plat_delay_timer.c		\
+		lib/cpus/aarch64/cortex_a53.S				\
+		plat/intel/soc/stratix10/stratix10_image_load.c		\
+		plat/intel/soc/stratix10/soc/s10_system_manager.c	\
+                common/desc_image_load.c
+
+#		plat/intel/soc/stratix10/plat_topology.c		\
+
+PROGRAMMABLE_RESET_ADDRESS	:= 0
+BL2_AT_EL3			:= 1
+MULTI_CONSOLE_API		:= 1
diff --git a/plat/intel/soc/stratix10/platform_def.h b/plat/intel/soc/stratix10/platform_def.h
new file mode 100644
index 0000000..88469ed
--- /dev/null
+++ b/plat/intel/soc/stratix10/platform_def.h
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLATFORM_DEF_H__
+#define __PLATFORM_DEF_H__
+
+#include <arch.h>
+#include <common/bl_common.h>
+#include <common/interrupt_props.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <drivers/arm/gic_common.h>
+#include <plat/common/common_def.h>
+
+
+/* Define next boot image name and offset */
+#define PLAT_NS_IMAGE_OFFSET			0x50000
+#define PLAT_HANDOFF_OFFSET			0xFFE3F000
+
+/*******************************************************************************
+ * Platform binary types for linking
+ ******************************************************************************/
+#define PLATFORM_LINKER_FORMAT			"elf64-littleaarch64"
+#define PLATFORM_LINKER_ARCH			aarch64
+
+/* Stratix 10 supports up to 124GB RAM */
+#define PLAT_PHY_ADDR_SPACE_SIZE		(1ULL << 39)
+#define PLAT_VIRT_ADDR_SPACE_SIZE		(1ULL << 39)
+
+
+/*******************************************************************************
+ * Generic platform constants
+ ******************************************************************************/
+#define PLAT_PRIMARY_CPU			0
+#define PLAT_SECONDARY_ENTRY_BASE		0x01f78bf0
+
+/* Size of cacheable stacks */
+#define PLATFORM_STACK_SIZE			0x2000
+
+/* PSCI related constant */
+#define PLAT_NUM_POWER_DOMAINS		5
+#define PLAT_MAX_PWR_LVL		1
+#define PLAT_MAX_RET_STATE		1
+#define PLAT_MAX_OFF_STATE		2
+#define PLATFORM_SYSTEM_COUNT			1
+#define PLATFORM_CLUSTER_COUNT			1
+#define PLATFORM_CLUSTER0_CORE_COUNT		4
+#define PLATFORM_CLUSTER1_CORE_COUNT		0
+#define PLATFORM_CORE_COUNT		(PLATFORM_CLUSTER1_CORE_COUNT + \
+					PLATFORM_CLUSTER0_CORE_COUNT)
+#define PLATFORM_MAX_CPUS_PER_CLUSTER		4
+
+/* Interrupt related constant */
+
+#define INTEL_S10_IRQ_SEC_PHY_TIMER		29
+
+#define INTEL_S10_IRQ_SEC_SGI_0		8
+#define INTEL_S10_IRQ_SEC_SGI_1		9
+#define INTEL_S10_IRQ_SEC_SGI_2		10
+#define INTEL_S10_IRQ_SEC_SGI_3		11
+#define INTEL_S10_IRQ_SEC_SGI_4		12
+#define INTEL_S10_IRQ_SEC_SGI_5		13
+#define INTEL_S10_IRQ_SEC_SGI_6		14
+#define INTEL_S10_IRQ_SEC_SGI_7		15
+
+#define TSP_IRQ_SEC_PHY_TIMER		INTEL_S10_IRQ_SEC_PHY_TIMER
+#define TSP_SEC_MEM_BASE		BL32_BASE
+#define TSP_SEC_MEM_SIZE		(BL32_LIMIT - BL32_BASE + 1)
+/*******************************************************************************
+ * Platform memory map related constants
+ ******************************************************************************/
+#define DRAM_BASE				(0x0)
+#define DRAM_SIZE				(0x80000000)
+
+#define OCRAM_BASE				(0xFFE00000)
+#define OCRAM_SIZE				(0x00100000)
+
+#define MEM64_BASE				(0x0100000000)
+#define MEM64_SIZE				(0x1F00000000)
+
+#define DEVICE1_BASE				(0x80000000)
+#define DEVICE1_SIZE				(0x60000000)
+
+#define DEVICE2_BASE				(0xF7000000)
+#define DEVICE2_SIZE				(0x08E00000)
+
+#define DEVICE3_BASE				(0xFFFC0000)
+#define DEVICE3_SIZE				(0x00008000)
+
+#define DEVICE4_BASE				(0x2000000000)
+#define DEVICE4_SIZE				(0x0100000000)
+
+/*******************************************************************************
+ * BL31 specific defines.
+ ******************************************************************************/
+/*
+ * Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if
+ * present). BL31_BASE is calculated using the current BL3-1 debug size plus a
+ * little space for growth.
+ */
+
+
+#define FIRMWARE_WELCOME_STR		"Booting Trusted Firmware\n"
+
+#define BL1_RO_BASE	(0xffe00000)
+#define BL1_RO_LIMIT	(0xffe0f000)
+#define BL1_RW_BASE	(0xffe10000)
+#define BL1_RW_LIMIT	(0xffe1ffff)
+#define BL1_RW_SIZE	(0x14000)
+
+#define BL2_BASE	(0xffe00000)
+#define BL2_LIMIT	(0xffe1c000)
+
+#define BL31_BASE	(0xffe1c000)
+#define BL31_LIMIT	(0xffe3ffff)
+
+/*******************************************************************************
+ * Platform specific page table and MMU setup constants
+ ******************************************************************************/
+#define MAX_XLAT_TABLES			8
+#define MAX_MMAP_REGIONS		16
+
+/*******************************************************************************
+ * Declarations and constants to access the mailboxes safely. Each mailbox is
+ * aligned on the biggest cache line size in the platform. This is known only
+ * to the platform as it might have a combination of integrated and external
+ * caches. Such alignment ensures that two maiboxes do not sit on the same cache
+ * line at any cache level. They could belong to different cpus/clusters &
+ * get written while being protected by different locks causing corruption of
+ * a valid mailbox address.
+ ******************************************************************************/
+#define CACHE_WRITEBACK_SHIFT			6
+#define CACHE_WRITEBACK_GRANULE		(1 << CACHE_WRITEBACK_SHIFT)
+
+#define PLAT_GIC_BASE			(0xFFFC0000)
+#define PLAT_GICC_BASE			(PLAT_GIC_BASE + 0x2000)
+#define PLAT_GICD_BASE			(PLAT_GIC_BASE + 0x1000)
+#define PLAT_GICR_BASE			0
+
+/*******************************************************************************
+ * UART related constants
+ ******************************************************************************/
+#define PLAT_UART0_BASE		(0xFFC02000)
+#define PLAT_UART1_BASE		(0xFFC02100)
+
+#define CRASH_CONSOLE_BASE	PLAT_UART0_BASE
+
+#define PLAT_BAUDRATE			(115200)
+#define PLAT_UART_CLOCK		(100000000)
+
+/*******************************************************************************
+ * System counter frequency related constants
+ ******************************************************************************/
+#define PLAT_SYS_COUNTER_FREQ_IN_TICKS	(400000000)
+#define PLAT_SYS_COUNTER_FREQ_IN_MHZ	(400)
+
+#define PLAT_INTEL_S10_GICD_BASE	PLAT_GICD_BASE
+#define PLAT_INTEL_S10_GICC_BASE	PLAT_GICC_BASE
+
+/*
+ * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define PLAT_INTEL_S10_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(INTEL_S10_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, \
+			grp, GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(INTEL_S10_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(INTEL_S10_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(INTEL_S10_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(INTEL_S10_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(INTEL_S10_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(INTEL_S10_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(INTEL_S10_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(INTEL_S10_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE)
+
+#define PLAT_INTEL_S10_G0_IRQ_PROPS(grp)
+
+#define MAX_IO_HANDLES                   4
+#define MAX_IO_DEVICES                  4
+#define MAX_IO_BLOCK_DEVICES             2
+
+
+#endif /* __PLATFORM_DEF_H__ */
+
diff --git a/plat/intel/soc/stratix10/soc/s10_clock_manager.c b/plat/intel/soc/stratix10/soc/s10_clock_manager.c
new file mode 100644
index 0000000..9d4617a
--- /dev/null
+++ b/plat/intel/soc/stratix10/soc/s10_clock_manager.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+#include <platform_def.h>
+#include <platform_private.h>
+
+#include "s10_clock_manager.h"
+#include "s10_handoff.h"
+
+
+void wait_pll_lock(void)
+{
+	uint32_t data;
+
+	do {
+		data = mmio_read_32(ALT_CLKMGR + ALT_CLKMGR_STAT);
+	} while ((ALT_CLKMGR_STAT_MAINPLLLOCKED(data) == 0) ||
+			(ALT_CLKMGR_STAT_PERPLLLOCKED(data) == 0));
+}
+
+void wait_fsm(void)
+{
+	uint32_t data;
+
+	do {
+		data = mmio_read_32(ALT_CLKMGR + ALT_CLKMGR_STAT);
+	} while (ALT_CLKMGR_STAT_BUSY(data) == ALT_CLKMGR_STAT_BUSY_E_BUSY);
+}
+
+void config_clkmgr_handoff(handoff *hoff_ptr)
+{
+	uint32_t m_div, refclk_div, mscnt, hscnt;
+
+	/* Bypass all mainpllgrp's clocks */
+	mmio_write_32(ALT_CLKMGR_MAINPLL +
+			ALT_CLKMGR_MAINPLL_BYPASS,
+			0x7);
+	wait_fsm();
+	/* Bypass all perpllgrp's clocks */
+	mmio_write_32(ALT_CLKMGR_PERPLL +
+			ALT_CLKMGR_PERPLL_BYPASS,
+			0x7f);
+	wait_fsm();
+
+	/* Setup main PLL dividers */
+	m_div = ALT_CLKMGR_MAINPLL_FDBCK_MDIV(hoff_ptr->main_pll_fdbck);
+	refclk_div = ALT_CLKMGR_MAINPLL_PLLGLOB_REFCLKDIV(
+			hoff_ptr->main_pll_pllglob);
+	mscnt = 200 / ((6 + m_div) / refclk_div);
+	hscnt = (m_div + 6) * mscnt / refclk_div - 9;
+
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_PLLGLOB,
+			hoff_ptr->main_pll_pllglob);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_FDBCK,
+			hoff_ptr->main_pll_fdbck);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_VCOCALIB,
+			ALT_CLKMGR_MAINPLL_VCOCALIB_HSCNT_SET(hscnt) |
+			ALT_CLKMGR_MAINPLL_VCOCALIB_MSCNT_SET(mscnt));
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_PLLC0,
+			hoff_ptr->main_pll_pllc0);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_PLLC1,
+			hoff_ptr->main_pll_pllc1);
+
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_NOCDIV,
+			hoff_ptr->main_pll_nocdiv);
+
+	/* Setup peripheral PLL dividers */
+	m_div = ALT_CLKMGR_PERPLL_FDBCK_MDIV(hoff_ptr->per_pll_fdbck);
+	refclk_div = ALT_CLKMGR_PERPLL_PLLGLOB_REFCLKDIV(
+			hoff_ptr->per_pll_pllglob);
+	mscnt = 200 / ((6 + m_div) / refclk_div);
+	hscnt = (m_div + 6) * mscnt / refclk_div - 9;
+
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_PLLGLOB,
+			hoff_ptr->per_pll_pllglob);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_FDBCK,
+			hoff_ptr->per_pll_fdbck);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_VCOCALIB,
+			ALT_CLKMGR_PERPLL_VCOCALIB_HSCNT_SET(hscnt) |
+			ALT_CLKMGR_PERPLL_VCOCALIB_MSCNT_SET(mscnt));
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_PLLC0,
+			hoff_ptr->per_pll_pllc0);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_PLLC1,
+			hoff_ptr->per_pll_pllc1);
+
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_GPIODIV,
+			ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK_SET(
+			hoff_ptr->per_pll_gpiodiv));
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_EMACCTL,
+			hoff_ptr->per_pll_emacctl);
+
+
+	/* Take both PLL out of reset and power up */
+	mmio_setbits_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_PLLGLOB,
+			ALT_CLKMGR_MAINPLL_PLLGLOB_PD_SET_MSK |
+			ALT_CLKMGR_MAINPLL_PLLGLOB_RST_SET_MSK);
+	mmio_setbits_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_PLLGLOB,
+			ALT_CLKMGR_PERPLL_PLLGLOB_PD_SET_MSK |
+			ALT_CLKMGR_PERPLL_PLLGLOB_RST_SET_MSK);
+
+	wait_pll_lock();
+
+	/* Dividers for C2 to C9 only init after PLLs are lock. */
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_MPUCLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_NOCCLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR2CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR3CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR4CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR5CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR6CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR7CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR8CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR9CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR2CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR3CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR4CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR5CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR6CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR7CLK, 0xff);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR8CLK, 0xff);
+
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_MPUCLK,
+			hoff_ptr->main_pll_mpuclk);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_NOCCLK,
+			hoff_ptr->main_pll_nocclk);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR2CLK,
+			hoff_ptr->main_pll_cntr2clk);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR3CLK,
+			hoff_ptr->main_pll_cntr3clk);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR4CLK,
+			hoff_ptr->main_pll_cntr4clk);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR5CLK,
+			hoff_ptr->main_pll_cntr5clk);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR6CLK,
+			hoff_ptr->main_pll_cntr6clk);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR7CLK,
+			hoff_ptr->main_pll_cntr7clk);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR8CLK,
+			hoff_ptr->main_pll_cntr8clk);
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_CNTR9CLK,
+			hoff_ptr->main_pll_cntr9clk);
+
+	/* Peripheral PLL Clock Source and Counters/Divider */
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR2CLK,
+			hoff_ptr->per_pll_cntr2clk);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR3CLK,
+			hoff_ptr->per_pll_cntr3clk);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR4CLK,
+			hoff_ptr->per_pll_cntr4clk);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR5CLK,
+			hoff_ptr->per_pll_cntr5clk);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR6CLK,
+			hoff_ptr->per_pll_cntr6clk);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR7CLK,
+			hoff_ptr->per_pll_cntr7clk);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR8CLK,
+			hoff_ptr->per_pll_cntr8clk);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_CNTR9CLK,
+			hoff_ptr->per_pll_cntr9clk);
+
+	/* Take all PLLs out of bypass */
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_BYPASS, 0);
+	wait_fsm();
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_BYPASS, 0);
+	wait_fsm();
+
+	/* Set safe mode/ out of boot mode */
+	mmio_clrbits_32(ALT_CLKMGR + ALT_CLKMGR_CTRL,
+		ALT_CLKMGR_CTRL_BOOTMODE_SET_MSK);
+	wait_fsm();
+
+	/* 10 Enable mainpllgrp's software-managed clock */
+	mmio_write_32(ALT_CLKMGR_MAINPLL + ALT_CLKMGR_MAINPLL_EN,
+			ALT_CLKMGR_MAINPLL_EN_RESET);
+	mmio_write_32(ALT_CLKMGR_PERPLL + ALT_CLKMGR_PERPLL_EN,
+			ALT_CLKMGR_PERPLL_EN_RESET);
+
+	/* Clear loss lock  interrupt status register that */
+	/* might be set during configuration */
+	mmio_write_32(ALT_CLKMGR + ALT_CLKMGR_INTRCLR,
+			ALT_CLKMGR_INTRCLR_MAINLOCKLOST_SET_MSK |
+			ALT_CLKMGR_INTRCLR_PERLOCKLOST_SET_MSK);
+}
+
diff --git a/plat/intel/soc/stratix10/soc/s10_handoff.c b/plat/intel/soc/stratix10/soc/s10_handoff.c
new file mode 100644
index 0000000..55516c0
--- /dev/null
+++ b/plat/intel/soc/stratix10/soc/s10_handoff.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <drivers/arm/gicv2.h>
+#include <assert.h>
+#include <common/bl_common.h>
+#include <lib/mmio.h>
+#include <string.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+#include <platform_private.h>
+
+#include "s10_handoff.h"
+
+#define SWAP_UINT32(x) (((x) >> 24) | (((x) & 0x00FF0000) >> 8) |	\
+				(((x) & 0x0000FF00) << 8) | ((x) << 24))
+
+int s10_get_handoff(handoff *reverse_hoff_ptr)
+{
+	int i;
+	uint32_t *buffer;
+	handoff *handoff_ptr = (handoff *) PLAT_HANDOFF_OFFSET;
+
+	memcpy(reverse_hoff_ptr, handoff_ptr, sizeof(handoff));
+	buffer = (uint32_t *)reverse_hoff_ptr;
+
+	/* convert big indian to little indian */
+	for (i = 0; i < sizeof(handoff) / 4; i++)
+		buffer[i] = SWAP_UINT32(buffer[i]);
+
+	if (reverse_hoff_ptr->header_magic != HANDOFF_MAGIC_HEADER)
+		return -1;
+	if (reverse_hoff_ptr->pinmux_sel_magic != HANDOFF_MAGIC_PINMUX_SEL)
+		return -1;
+	if (reverse_hoff_ptr->pinmux_io_magic != HANDOFF_MAGIC_IOCTLR)
+		return -1;
+	if (reverse_hoff_ptr->pinmux_fpga_magic != HANDOFF_MAGIC_FPGA)
+		return -1;
+	if (reverse_hoff_ptr->pinmux_delay_magic != HANDOFF_MAGIC_IODELAY)
+		return -1;
+
+	return 0;
+}
diff --git a/plat/intel/soc/stratix10/soc/s10_memory_controller.c b/plat/intel/soc/stratix10/soc/s10_memory_controller.c
new file mode 100644
index 0000000..c528176
--- /dev/null
+++ b/plat/intel/soc/stratix10/soc/s10_memory_controller.c
@@ -0,0 +1,401 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <errno.h>
+#include <lib/mmio.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <string.h>
+
+#include "s10_memory_controller.h"
+
+#define ALT_CCU_NOC_DI_SET_MSK 0x10
+
+#define DDR_READ_LATENCY_DELAY 40
+#define MAX_MEM_CAL_RETRY		3
+#define PRE_CALIBRATION_DELAY		1
+#define POST_CALIBRATION_DELAY		1
+#define TIMEOUT_EMIF_CALIBRATION	100
+#define CLEAR_EMIF_DELAY		50000
+#define CLEAR_EMIF_TIMEOUT		0x100000
+#define TIMEOUT_INT_RESP		10000
+
+#define DDR_CONFIG(A, B, C, R)	(((A) << 24) | ((B) << 16) | ((C) << 8) | (R))
+#define DDR_CONFIG_ELEMENTS	(sizeof(ddr_config)/sizeof(uint32_t))
+
+/* tWR = Min. 15ns constant, see JEDEC standard eg. DDR4 is JESD79-4.pdf */
+#define tWR_IN_NS 15
+
+void configure_hmc_adaptor_regs(void);
+void configure_ddr_sched_ctrl_regs(void);
+
+/* The followring are the supported configurations */
+uint32_t ddr_config[] = {
+	/* DDR_CONFIG(Address order,Bank,Column,Row) */
+	/* List for DDR3 or LPDDR3 (pinout order > chip, row, bank, column) */
+	DDR_CONFIG(0, 3, 10, 12),
+	DDR_CONFIG(0, 3,  9, 13),
+	DDR_CONFIG(0, 3, 10, 13),
+	DDR_CONFIG(0, 3,  9, 14),
+	DDR_CONFIG(0, 3, 10, 14),
+	DDR_CONFIG(0, 3, 10, 15),
+	DDR_CONFIG(0, 3, 11, 14),
+	DDR_CONFIG(0, 3, 11, 15),
+	DDR_CONFIG(0, 3, 10, 16),
+	DDR_CONFIG(0, 3, 11, 16),
+	DDR_CONFIG(0, 3, 12, 15),	/* 0xa */
+	/* List for DDR4 only (pinout order > chip, bank, row, column) */
+	DDR_CONFIG(1, 3, 10, 14),
+	DDR_CONFIG(1, 4, 10, 14),
+	DDR_CONFIG(1, 3, 10, 15),
+	DDR_CONFIG(1, 4, 10, 15),
+	DDR_CONFIG(1, 3, 10, 16),
+	DDR_CONFIG(1, 4, 10, 16),
+	DDR_CONFIG(1, 3, 10, 17),
+	DDR_CONFIG(1, 4, 10, 17),
+};
+
+static int match_ddr_conf(uint32_t ddr_conf)
+{
+	int i;
+
+	for (i = 0; i < DDR_CONFIG_ELEMENTS; i++) {
+		if (ddr_conf == ddr_config[i])
+			return i;
+	}
+	return 0;
+}
+
+static int check_hmc_clk(void)
+{
+	unsigned long timeout = 0;
+	uint32_t hmc_clk;
+
+	do {
+		hmc_clk = mmio_read_32(S10_SYSMGR_CORE_HMC_CLK);
+		if (hmc_clk & S10_SYSMGR_CORE_HMC_CLK_STATUS)
+			break;
+		udelay(1);
+	} while (++timeout < 1000);
+	if (timeout >= 1000)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int clear_emif(void)
+{
+	uint32_t data;
+	unsigned long timeout;
+
+	mmio_write_32(S10_MPFE_HMC_ADP_RSTHANDSHAKECTRL, 0);
+
+	timeout = 0;
+	do {
+		data = mmio_read_32(S10_MPFE_HMC_ADP_RSTHANDSHAKESTAT);
+		if ((data & S10_MPFE_HMC_ADP_RSTHANDSHAKESTAT_SEQ2CORE) == 0)
+			break;
+		udelay(CLEAR_EMIF_DELAY);
+	} while (++timeout < CLEAR_EMIF_TIMEOUT);
+	if (timeout >= CLEAR_EMIF_TIMEOUT)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int mem_calibration(void)
+{
+	int status = 0;
+	uint32_t data;
+	unsigned long timeout;
+	unsigned long retry = 0;
+
+	udelay(PRE_CALIBRATION_DELAY);
+
+	do {
+		if (retry != 0)
+			INFO("DDR: Retrying DRAM calibration\n");
+
+		timeout = 0;
+		do {
+			data = mmio_read_32(S10_MPFE_HMC_ADP_DDRCALSTAT);
+			if (S10_MPFE_HMC_ADP_DDRCALSTAT_CAL(data) == 1)
+				break;
+			udelay(1);
+		} while (++timeout < TIMEOUT_EMIF_CALIBRATION);
+
+		if (S10_MPFE_HMC_ADP_DDRCALSTAT_CAL(data) == 0) {
+			status = clear_emif();
+		if (status)
+			ERROR("Failed to clear Emif\n");
+		} else {
+			break;
+		}
+	} while (++retry < MAX_MEM_CAL_RETRY);
+
+	if (S10_MPFE_HMC_ADP_DDRCALSTAT_CAL(data) == 0) {
+		ERROR("DDR: DRAM calibration failed.\n");
+		status = -EIO;
+	} else {
+		INFO("DDR: DRAM calibration success.\n");
+		status = 0;
+	}
+
+	udelay(POST_CALIBRATION_DELAY);
+
+	return status;
+}
+
+int init_hard_memory_controller(void)
+{
+	int status;
+
+	mmio_clrbits_32(S10_CCU_CPU0_MPRT_DDR, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_CPU0_MPRT_MEM0, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_CPU0_MPRT_MEM1A, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_CPU0_MPRT_MEM1B, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_CPU0_MPRT_MEM1C, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_CPU0_MPRT_MEM1D, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_CPU0_MPRT_MEM1E, S10_CCU_NOC_DI_SET_MSK);
+
+	mmio_clrbits_32(S10_CCU_IOM_MPRT_MEM0, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_IOM_MPRT_MEM1A, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_IOM_MPRT_MEM1B, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_IOM_MPRT_MEM1C, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_IOM_MPRT_MEM1D, S10_CCU_NOC_DI_SET_MSK);
+	mmio_clrbits_32(S10_CCU_IOM_MPRT_MEM1E, S10_CCU_NOC_DI_SET_MSK);
+
+	mmio_write_32(S10_NOC_FW_DDR_SCR_MPUREGION0ADDR_LIMIT, 0xFFFF0000);
+	mmio_write_32(S10_NOC_FW_DDR_SCR_MPUREGION0ADDR_LIMITEXT, 0x1F);
+
+	mmio_write_32(S10_NOC_FW_DDR_SCR_NONMPUREGION0ADDR_LIMIT, 0xFFFF0000);
+	mmio_write_32(S10_NOC_FW_DDR_SCR_NONMPUREGION0ADDR_LIMITEXT, 0x1F);
+	mmio_write_32(S10_SOC_NOC_FW_DDR_SCR_ENABLE, BIT(0) | BIT(8));
+
+	status = check_hmc_clk();
+	if (status) {
+		ERROR("DDR: Error, HMC clock not running\n");
+		return status;
+	}
+
+	mmio_clrbits_32(S10_RSTMGR_BRGMODRST, S10_RSTMGR_BRGMODRST_DDRSCH);
+
+	status = mem_calibration();
+	if (status) {
+		ERROR("DDR: Memory Calibration Failed\n");
+		return status;
+	}
+
+	configure_hmc_adaptor_regs();
+	configure_ddr_sched_ctrl_regs();
+
+	return 0;
+}
+
+void configure_ddr_sched_ctrl_regs(void)
+{
+	uint32_t data, dram_addr_order, ddr_conf, bank, row, col,
+		rd_to_miss, wr_to_miss, burst_len, burst_len_ddr_clk,
+		burst_len_sched_clk, act_to_act, rd_to_wr, wr_to_rd, bw_ratio,
+		t_rtp, t_rp, t_rcd, rd_latency, tw_rin_clk_cycles,
+		bw_ratio_extended, auto_precharge = 0, act_to_act_bank, faw,
+		faw_bank, bus_rd_to_rd, bus_rd_to_wr, bus_wr_to_rd;
+
+	INFO("Init HPS NOC's DDR Scheduler.\n");
+
+	data = mmio_read_32(S10_MPFE_IOHMC_CTRLCFG1);
+	dram_addr_order = S10_MPFE_IOHMC_CTRLCFG1_CFG_ADDR_ORDER(data);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_DRAMADDRW);
+
+	col  = IOHMC_DRAMADDRW_COL_ADDR_WIDTH(data);
+	row  = IOHMC_DRAMADDRW_ROW_ADDR_WIDTH(data);
+	bank = IOHMC_DRAMADDRW_BANK_ADDR_WIDTH(data) +
+		IOHMC_DRAMADDRW_BANK_GRP_ADDR_WIDTH(data);
+
+	ddr_conf = match_ddr_conf(DDR_CONFIG(dram_addr_order, bank, col, row));
+
+	if (ddr_conf) {
+		mmio_clrsetbits_32(
+			S10_MPFE_DDR_MAIN_SCHED_DDRCONF,
+			S10_MPFE_DDR_MAIN_SCHED_DDRCONF_SET_MSK,
+			S10_MPFE_DDR_MAIN_SCHED_DDRCONF_SET(ddr_conf));
+	} else {
+		ERROR("DDR: Cannot find predefined ddrConf configuration.\n");
+	}
+
+	mmio_write_32(S10_MPFE_HMC_ADP(ADP_DRAMADDRWIDTH), data);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_DRAMTIMING0);
+	rd_latency = S10_MPFE_IOHMC_REG_DRAMTIMING0_CFG_TCL(data);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_CALTIMING0);
+	act_to_act = ACT_TO_ACT(data);
+	t_rcd = ACT_TO_RDWR(data);
+	act_to_act_bank = ACT_TO_ACT_DIFF_BANK(data);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_CALTIMING1);
+	rd_to_wr = RD_TO_WR(data);
+	bus_rd_to_rd = RD_TO_RD_DIFF_CHIP(data);
+	bus_rd_to_wr = RD_TO_WR_DIFF_CHIP(data);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_CALTIMING2);
+	t_rtp = RD_TO_PCH(data);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_CALTIMING3);
+	wr_to_rd = CALTIMING3_WR_TO_RD(data);
+	bus_wr_to_rd = CALTIMING3_WR_TO_RD_DIFF_CHIP(data);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_CALTIMING4);
+	t_rp = PCH_TO_VALID(data);
+
+	data = mmio_read_32(S10_MPFE_HMC_ADP(HMC_ADP_DDRIOCTRL));
+	bw_ratio = ((HMC_ADP_DDRIOCTRL_IO_SIZE(data) == 0) ? 0 : 1);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_CTRLCFG0);
+	burst_len = HMC_ADP_DDRIOCTRL_CTRL_BURST_LENGTH(data);
+	burst_len_ddr_clk = burst_len / 2;
+	burst_len_sched_clk = ((burst_len/2) / 2);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_CTRLCFG0);
+	switch (S10_MPFE_IOHMC_REG_CTRLCFG0_CFG_MEM_TYPE(data)) {
+	case 1:
+		/* DDR4 - 1333MHz */
+		/* 20 (19.995) clock cycles = 15ns */
+		/* Calculate with rounding */
+		tw_rin_clk_cycles = (((tWR_IN_NS * 1333) % 1000) >= 500) ?
+			((tWR_IN_NS * 1333) / 1000) + 1 :
+			((tWR_IN_NS * 1333) / 1000);
+		break;
+	default:
+		/* Others - 1066MHz or slower */
+		/* 16 (15.990) clock cycles = 15ns */
+		/* Calculate with rounding */
+		tw_rin_clk_cycles = (((tWR_IN_NS * 1066) % 1000) >= 500) ?
+			((tWR_IN_NS * 1066) / 1000) + 1 :
+			((tWR_IN_NS * 1066) / 1000);
+		break;
+	}
+
+	rd_to_miss = t_rtp + t_rp + t_rcd - burst_len_sched_clk;
+	wr_to_miss = ((rd_latency + burst_len_ddr_clk + 2 + tw_rin_clk_cycles)
+			/ 2) - rd_to_wr + t_rp + t_rcd;
+
+	mmio_write_32(S10_MPFE_DDR_MAIN_SCHED_DDRTIMING,
+		bw_ratio << DDRTIMING_BWRATIO_OFST |
+		wr_to_rd << DDRTIMING_WRTORD_OFST|
+		rd_to_wr << DDRTIMING_RDTOWR_OFST |
+		burst_len_sched_clk << DDRTIMING_BURSTLEN_OFST |
+		wr_to_miss << DDRTIMING_WRTOMISS_OFST |
+		rd_to_miss << DDRTIMING_RDTOMISS_OFST |
+		act_to_act << DDRTIMING_ACTTOACT_OFST);
+
+	data = mmio_read_32(S10_MPFE_HMC_ADP(HMC_ADP_DDRIOCTRL));
+	bw_ratio_extended = ((ADP_DDRIOCTRL_IO_SIZE(data) == 0) ? 1 : 0);
+
+	mmio_write_32(S10_MPFE_DDR_MAIN_SCHED_DDRMODE,
+		bw_ratio_extended << DDRMODE_BWRATIOEXTENDED_OFST |
+		auto_precharge << DDRMODE_AUTOPRECHARGE_OFST);
+
+	mmio_write_32(S10_MPFE_DDR_MAIN_SCHED_READLATENCY,
+		(rd_latency / 2) + DDR_READ_LATENCY_DELAY);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_CALTIMING9);
+	faw = S10_MPFE_IOHMC_CALTIMING9_ACT_TO_ACT(data);
+
+	faw_bank = 1; // always 1 because we always have 4 bank DDR.
+
+	mmio_write_32(S10_MPFE_DDR_MAIN_SCHED_ACTIVATE,
+		faw_bank << S10_MPFE_DDR_MAIN_SCHED_ACTIVATE_FAWBANK_OFST |
+		faw << S10_MPFE_DDR_MAIN_SCHED_ACTIVATE_FAW_OFST |
+		act_to_act_bank << S10_MPFE_DDR_MAIN_SCHED_ACTIVATE_RRD_OFST);
+
+	mmio_write_32(S10_MPFE_DDR_MAIN_SCHED_DEVTODEV,
+	bus_rd_to_rd << S10_MPFE_DDR_MAIN_SCHED_DEVTODEV_BUSRDTORD_OFST |
+	bus_rd_to_wr << S10_MPFE_DDR_MAIN_SCHED_DEVTODEV_BUSRDTOWR_OFST |
+	bus_wr_to_rd << S10_MPFE_DDR_MAIN_SCHED_DEVTODEV_BUSWRTORD_OFST);
+
+}
+
+unsigned long get_physical_dram_size(void)
+{
+	uint32_t data;
+	unsigned long ram_addr_width, ram_ext_if_io_width;
+
+	data = mmio_read_32(S10_MPFE_HMC_ADP_DDRIOCTRL);
+	switch (S10_MPFE_HMC_ADP_DDRIOCTRL_IO_SIZE(data)) {
+	case 0:
+		ram_ext_if_io_width = 16;
+		break;
+	case 1:
+		ram_ext_if_io_width = 32;
+		break;
+	case 2:
+		ram_ext_if_io_width = 64;
+		break;
+	default:
+		ram_ext_if_io_width = 0;
+		break;
+	}
+
+	data = mmio_read_32(S10_MPFE_IOHMC_REG_DRAMADDRW);
+	ram_addr_width = IOHMC_DRAMADDRW_CFG_COL_ADDR_WIDTH(data) +
+		IOHMC_DRAMADDRW_CFG_ROW_ADDR_WIDTH(data) +
+		IOHMC_DRAMADDRW_CFG_BANK_ADDR_WIDTH(data) +
+		IOHMC_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH(data) +
+		IOHMC_DRAMADDRW_CFG_CS_ADDR_WIDTH(data);
+
+	return (1 << ram_addr_width) * (ram_ext_if_io_width / 8);
+}
+
+
+
+void configure_hmc_adaptor_regs(void)
+{
+	uint32_t data;
+	uint32_t dram_io_width;
+
+	dram_io_width = S10_MPFE_IOHMC_NIOSRESERVE0_NIOS_RESERVE0(
+		mmio_read_32(S10_MPFE_IOHMC_REG_NIOSRESERVE0_OFST));
+
+	dram_io_width = (dram_io_width & 0xFF) >> 5;
+
+	mmio_clrsetbits_32(S10_MPFE_HMC_ADP_DDRIOCTRL,
+		S10_MPFE_HMC_ADP_DDRIOCTRL_IO_SIZE_MSK,
+		dram_io_width << S10_MPFE_HMC_ADP_DDRIOCTRL_IO_SIZE_OFST);
+
+	mmio_write_32(S10_MPFE_HMC_ADP_HPSINTFCSEL,
+		S10_MPFE_HMC_ADP_HPSINTFCSEL_ENABLE);
+
+	data = mmio_read_32(S10_MPFE_IOHMC_REG_CTRLCFG1);
+	if (data & (1 << S10_IOHMC_CTRLCFG1_ENABLE_ECC_OFST)) {
+		mmio_clrsetbits_32(S10_MPFE_HMC_ADP_ECCCTRL1,
+			S10_MPFE_HMC_ADP_ECCCTRL1_AUTOWB_CNT_RST_SET_MSK |
+			S10_MPFE_HMC_ADP_ECCCTRL1_CNT_RST_SET_MSK |
+			S10_MPFE_HMC_ADP_ECCCTRL1_ECC_EN_SET_MSK,
+			S10_MPFE_HMC_ADP_ECCCTRL1_AUTOWB_CNT_RST_SET_MSK |
+			S10_MPFE_HMC_ADP_ECCCTRL1_CNT_RST_SET_MSK);
+
+		mmio_clrsetbits_32(S10_MPFE_HMC_ADP_ECCCTRL2,
+			S10_MPFE_HMC_ADP_ECCCTRL2_OVRW_RB_ECC_EN_SET_MSK |
+			S10_MPFE_HMC_ADP_ECCCTRL2_RMW_EN_SET_MSK |
+			S10_MPFE_HMC_ADP_ECCCTRL2_AUTOWB_EN_SET_MSK,
+			S10_MPFE_HMC_ADP_ECCCTRL2_RMW_EN_SET_MSK |
+			S10_MPFE_HMC_ADP_ECCCTRL2_AUTOWB_EN_SET_MSK);
+
+		mmio_clrsetbits_32(S10_MPFE_HMC_ADP_ECCCTRL1,
+			S10_MPFE_HMC_ADP_ECCCTRL1_AUTOWB_CNT_RST_SET_MSK |
+			S10_MPFE_HMC_ADP_ECCCTRL1_CNT_RST_SET_MSK |
+			S10_MPFE_HMC_ADP_ECCCTRL1_ECC_EN_SET_MSK,
+			S10_MPFE_HMC_ADP_ECCCTRL1_ECC_EN_SET_MSK);
+
+	} else {
+		INFO("ECC is disabled.\n");
+	}
+}
+
diff --git a/plat/intel/soc/stratix10/soc/s10_pinmux.c b/plat/intel/soc/stratix10/soc/s10_pinmux.c
new file mode 100644
index 0000000..7fb4711
--- /dev/null
+++ b/plat/intel/soc/stratix10/soc/s10_pinmux.c
@@ -0,0 +1,217 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <lib/mmio.h>
+
+#include "s10_pinmux.h"
+
+const uint32_t sysmgr_pinmux_array_sel[] = {
+	0x00000000, 0x00000001, /* usb */
+	0x00000004, 0x00000001,
+	0x00000008, 0x00000001,
+	0x0000000c, 0x00000001,
+	0x00000010, 0x00000001,
+	0x00000014, 0x00000001,
+	0x00000018, 0x00000001,
+	0x0000001c, 0x00000001,
+	0x00000020, 0x00000001,
+	0x00000024, 0x00000001,
+	0x00000028, 0x00000001,
+	0x0000002c, 0x00000001,
+	0x00000030, 0x00000000, /* emac0 */
+	0x00000034, 0x00000000,
+	0x00000038, 0x00000000,
+	0x0000003c, 0x00000000,
+	0x00000040, 0x00000000,
+	0x00000044, 0x00000000,
+	0x00000048, 0x00000000,
+	0x0000004c, 0x00000000,
+	0x00000050, 0x00000000,
+	0x00000054, 0x00000000,
+	0x00000058, 0x00000000,
+	0x0000005c, 0x00000000,
+	0x00000060, 0x00000008, /* gpio1 */
+	0x00000064, 0x00000008,
+	0x00000068, 0x00000005,  /* uart0 tx */
+	0x0000006c, 0x00000005,  /*  uart 0 rx */
+	0x00000070, 0x00000008,  /*  gpio */
+	0x00000074, 0x00000008,
+	0x00000078, 0x00000004, /* i2c1 */
+	0x0000007c, 0x00000004,
+	0x00000080, 0x00000007,  /* jtag */
+	0x00000084, 0x00000007,
+	0x00000088, 0x00000007,
+	0x0000008c, 0x00000007,
+	0x00000090, 0x00000001,  /* sdmmc data0 */
+	0x00000094, 0x00000001,
+	0x00000098, 0x00000001,
+	0x0000009c, 0x00000001,
+	0x00000100, 0x00000001,
+	0x00000104, 0x00000001,  /* sdmmc.data3 */
+	0x00000108, 0x00000008,  /* loan */
+	0x0000010c, 0x00000008,   /* gpio */
+	0x00000110, 0x00000008,
+	0x00000114, 0x00000008,  /* gpio1.io21 */
+	0x00000118, 0x00000005,  /* mdio0.mdio */
+	0x0000011c, 0x00000005  /* mdio0.mdc */
+};
+
+const uint32_t sysmgr_pinmux_array_ctrl[] = {
+	0x00000000, 0x00502c38, /* Q1_1 */
+	0x00000004, 0x00102c38,
+	0x00000008, 0x00502c38,
+	0x0000000c, 0x00502c38,
+	0x00000010, 0x00502c38,
+	0x00000014, 0x00502c38,
+	0x00000018, 0x00502c38,
+	0x0000001c, 0x00502c38,
+	0x00000020, 0x00502c38,
+	0x00000024, 0x00502c38,
+	0x00000028, 0x00502c38,
+	0x0000002c, 0x00502c38,
+	0x00000030, 0x00102c38, /* Q2_1 */
+	0x00000034, 0x00102c38,
+	0x00000038, 0x00502c38,
+	0x0000003c, 0x00502c38,
+	0x00000040, 0x00102c38,
+	0x00000044, 0x00102c38,
+	0x00000048, 0x00502c38,
+	0x0000004c, 0x00502c38,
+	0x00000050, 0x00102c38,
+	0x00000054, 0x00102c38,
+	0x00000058, 0x00502c38,
+	0x0000005c, 0x00502c38,
+	0x00000060, 0x00502c38, /* Q3_1 */
+	0x00000064, 0x00502c38,
+	0x00000068, 0x00102c38,
+	0x0000006c, 0x00502c38,
+	0x000000d0, 0x00502c38,
+	0x000000d4, 0x00502c38,
+	0x000000d8, 0x00542c38,
+	0x000000dc, 0x00542c38,
+	0x000000e0, 0x00502c38,
+	0x000000e4, 0x00502c38,
+	0x000000e8, 0x00102c38,
+	0x000000ec, 0x00502c38,
+	0x000000f0, 0x00502c38, /* Q4_1 */
+	0x000000f4, 0x00502c38,
+	0x000000f8, 0x00102c38,
+	0x000000fc, 0x00502c38,
+	0x00000100, 0x00502c38,
+	0x00000104, 0x00502c38,
+	0x00000108, 0x00102c38,
+	0x0000010c, 0x00502c38,
+	0x00000110, 0x00502c38,
+	0x00000114, 0x00502c38,
+	0x00000118, 0x00542c38,
+	0x0000011c, 0x00102c38
+};
+
+const uint32_t sysmgr_pinmux_array_fpga[] = {
+	0x00000000, 0x00000000,
+	0x00000004, 0x00000000,
+	0x00000008, 0x00000000,
+	0x0000000c, 0x00000000,
+	0x00000010, 0x00000000,
+	0x00000014, 0x00000000,
+	0x00000018, 0x00000000,
+	0x0000001c, 0x00000000,
+	0x00000020, 0x00000000,
+	0x00000028, 0x00000000,
+	0x0000002c, 0x00000000,
+	0x00000030, 0x00000000,
+	0x00000034, 0x00000000,
+	0x00000038, 0x00000000,
+	0x0000003c, 0x00000000,
+	0x00000040, 0x00000000,
+	0x00000044, 0x00000000,
+	0x00000048, 0x00000000,
+	0x00000050, 0x00000000,
+	0x00000054, 0x00000000,
+	0x00000058, 0x0000002a
+};
+
+const uint32_t sysmgr_pinmux_array_iodelay[] = {
+	0x00000000, 0x00000000,
+	0x00000004, 0x00000000,
+	0x00000008, 0x00000000,
+	0x0000000c, 0x00000000,
+	0x00000010, 0x00000000,
+	0x00000014, 0x00000000,
+	0x00000018, 0x00000000,
+	0x0000001c, 0x00000000,
+	0x00000020, 0x00000000,
+	0x00000024, 0x00000000,
+	0x00000028, 0x00000000,
+	0x0000002c, 0x00000000,
+	0x00000030, 0x00000000,
+	0x00000034, 0x00000000,
+	0x00000038, 0x00000000,
+	0x0000003c, 0x00000000,
+	0x00000040, 0x00000000,
+	0x00000044, 0x00000000,
+	0x00000048, 0x00000000,
+	0x0000004c, 0x00000000,
+	0x00000050, 0x00000000,
+	0x00000054, 0x00000000,
+	0x00000058, 0x00000000,
+	0x0000005c, 0x00000000,
+	0x00000060, 0x00000000,
+	0x00000064, 0x00000000,
+	0x00000068, 0x00000000,
+	0x0000006c, 0x00000000,
+	0x00000070, 0x00000000,
+	0x00000074, 0x00000000,
+	0x00000078, 0x00000000,
+	0x0000007c, 0x00000000,
+	0x00000080, 0x00000000,
+	0x00000084, 0x00000000,
+	0x00000088, 0x00000000,
+	0x0000008c, 0x00000000,
+	0x00000090, 0x00000000,
+	0x00000094, 0x00000000,
+	0x00000098, 0x00000000,
+	0x0000009c, 0x00000000,
+	0x00000100, 0x00000000,
+	0x00000104, 0x00000000,
+	0x00000108, 0x00000000,
+	0x0000010c, 0x00000000,
+	0x00000110, 0x00000000,
+	0x00000114, 0x00000000,
+	0x00000118, 0x00000000,
+	0x0000011c, 0x00000000
+};
+
+void config_pinmux(handoff *hoff_ptr)
+{
+	unsigned int i;
+
+	for (i = 0; i < 96; i += 2) {
+		mmio_write_32(S10_PINMUX_PIN0SEL +
+			hoff_ptr->pinmux_sel_array[i],
+			hoff_ptr->pinmux_sel_array[i+1]);
+	}
+
+	for (i = 0; i < 96; i += 2) {
+		mmio_write_32(S10_PINMUX_IO0CTRL +
+			hoff_ptr->pinmux_io_array[i],
+			hoff_ptr->pinmux_io_array[i+1]);
+	}
+
+	for (i = 0; i < 42; i += 2) {
+		mmio_write_32(S10_PINMUX_PINMUX_EMAC0_USEFPGA +
+			hoff_ptr->pinmux_fpga_array[i],
+			hoff_ptr->pinmux_fpga_array[i+1]);
+	}
+
+	for (i = 0; i < 96; i += 2) {
+		mmio_write_32(S10_PINMUX_IO0_DELAY +
+			hoff_ptr->pinmux_iodelay_array[i],
+			hoff_ptr->pinmux_iodelay_array[i+1]);
+	}
+
+}
+
diff --git a/plat/intel/soc/stratix10/soc/s10_reset_manager.c b/plat/intel/soc/stratix10/soc/s10_reset_manager.c
new file mode 100644
index 0000000..8b58db6
--- /dev/null
+++ b/plat/intel/soc/stratix10/soc/s10_reset_manager.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/arm/gicv2.h>
+#include <drivers/console.h>
+#include <lib/mmio.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+#include <platform_private.h>
+#include "s10_reset_manager.h"
+
+void deassert_peripheral_reset(void)
+{
+	mmio_clrbits_32(S10_RSTMGR_PER1MODRST,
+			S10_RSTMGR_PER1MODRST_WATCHDOG0 |
+			S10_RSTMGR_PER1MODRST_WATCHDOG1 |
+			S10_RSTMGR_PER1MODRST_WATCHDOG2 |
+			S10_RSTMGR_PER1MODRST_WATCHDOG3 |
+			S10_RSTMGR_PER1MODRST_L4SYSTIMER0 |
+			S10_RSTMGR_PER1MODRST_L4SYSTIMER1 |
+			S10_RSTMGR_PER1MODRST_SPTIMER0 |
+			S10_RSTMGR_PER1MODRST_SPTIMER1 |
+			S10_RSTMGR_PER1MODRST_I2C0 |
+			S10_RSTMGR_PER1MODRST_I2C1 |
+			S10_RSTMGR_PER1MODRST_I2C2 |
+			S10_RSTMGR_PER1MODRST_I2C3 |
+			S10_RSTMGR_PER1MODRST_I2C4 |
+			S10_RSTMGR_PER1MODRST_UART0 |
+			S10_RSTMGR_PER1MODRST_UART1 |
+			S10_RSTMGR_PER1MODRST_GPIO0 |
+			S10_RSTMGR_PER1MODRST_GPIO1);
+
+	mmio_clrbits_32(S10_RSTMGR_PER0MODRST,
+			S10_RSTMGR_PER0MODRST_EMAC0OCP |
+			S10_RSTMGR_PER0MODRST_EMAC1OCP |
+			S10_RSTMGR_PER0MODRST_EMAC2OCP |
+			S10_RSTMGR_PER0MODRST_USB0OCP |
+			S10_RSTMGR_PER0MODRST_USB1OCP |
+			S10_RSTMGR_PER0MODRST_NANDOCP |
+			S10_RSTMGR_PER0MODRST_SDMMCOCP |
+			S10_RSTMGR_PER0MODRST_DMAOCP);
+
+	mmio_clrbits_32(S10_RSTMGR_PER0MODRST,
+			S10_RSTMGR_PER0MODRST_EMAC0 |
+			S10_RSTMGR_PER0MODRST_EMAC1 |
+			S10_RSTMGR_PER0MODRST_EMAC2 |
+			S10_RSTMGR_PER0MODRST_USB0 |
+			S10_RSTMGR_PER0MODRST_USB1 |
+			S10_RSTMGR_PER0MODRST_NAND |
+			S10_RSTMGR_PER0MODRST_SDMMC |
+			S10_RSTMGR_PER0MODRST_DMA |
+			S10_RSTMGR_PER0MODRST_SPIM0 |
+			S10_RSTMGR_PER0MODRST_SPIM1 |
+			S10_RSTMGR_PER0MODRST_SPIS0 |
+			S10_RSTMGR_PER0MODRST_SPIS1 |
+			S10_RSTMGR_PER0MODRST_EMACPTP |
+			S10_RSTMGR_PER0MODRST_DMAIF0 |
+			S10_RSTMGR_PER0MODRST_DMAIF1 |
+			S10_RSTMGR_PER0MODRST_DMAIF2 |
+			S10_RSTMGR_PER0MODRST_DMAIF3 |
+			S10_RSTMGR_PER0MODRST_DMAIF4 |
+			S10_RSTMGR_PER0MODRST_DMAIF5 |
+			S10_RSTMGR_PER0MODRST_DMAIF6 |
+			S10_RSTMGR_PER0MODRST_DMAIF7);
+
+}
+
+void config_hps_hs_before_warm_reset(void)
+{
+	uint32_t or_mask = 0;
+
+	or_mask |= S10_RSTMGR_HDSKEN_SDRSELFREFEN;
+	or_mask |= S10_RSTMGR_HDSKEN_FPGAHSEN;
+	or_mask |= S10_RSTMGR_HDSKEN_ETRSTALLEN;
+	or_mask |= S10_RSTMGR_HDSKEN_L2FLUSHEN;
+	or_mask |= S10_RSTMGR_HDSKEN_L3NOC_DBG;
+	or_mask |= S10_RSTMGR_HDSKEN_DEBUG_L3NOC;
+
+	mmio_setbits_32(S10_RSTMGR_HDSKEN, or_mask);
+}
+
diff --git a/plat/intel/soc/stratix10/soc/s10_system_manager.c b/plat/intel/soc/stratix10/soc/s10_system_manager.c
new file mode 100644
index 0000000..48f37d7
--- /dev/null
+++ b/plat/intel/soc/stratix10/soc/s10_system_manager.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <lib/mmio.h>
+#include <lib/utils_def.h>
+#include "s10_system_manager.h"
+
+void enable_nonsecure_access(void)
+{
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_NAND_REGISTER, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_NAND_DATA, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_NAND_ECC, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_NAND_READ_ECC, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_NAND_WRITE_ECC,
+		DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_USB0_REGISTER, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_USB1_REGISTER, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_USB0_ECC, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_USB1_ECC, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_SPI_MASTER0, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_SPI_MASTER1, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_SPI_SLAVE0, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_SPI_SLAVE1, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_EMAC0, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_EMAC1, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_EMAC2, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_EMAC0RX_ECC, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_EMAC0TX_ECC, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_EMAC1RX_ECC, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_EMAC1TX_ECC, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_EMAC2RX_ECC, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_EMAC2TX_ECC, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_SDMMC, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_SDMMC_ECC, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_GPIO0, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_GPIO1, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_I2C0, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_I2C1, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_I2C2, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_I2C3, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_I2C4, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_SP_TIMER1, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_UART0, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_PER_SCR_UART1, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_DMA_ECC, DISABLE_L4_FIREWALL);
+
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_OCRAM_ECC, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_CLK_MGR, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_IO_MGR, DISABLE_L4_FIREWALL);
+
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_RST_MGR, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_SYS_MGR, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_OSC0_TIMER, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_OSC1_TIMER, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_WATCHDOG0, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_WATCHDOG1, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_WATCHDOG2, DISABLE_L4_FIREWALL);
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_WATCHDOG3, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_DAP, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_L4_NOC_PROBES, DISABLE_L4_FIREWALL);
+
+	mmio_write_32(S10_NOC_FW_L4_SYS_SCR_L4_NOC_QOS, DISABLE_L4_FIREWALL);
+
+	mmio_clrbits_32(S10_CCU_NOC_CPU0_RAMSPACE0_0, 0x03);
+	mmio_clrbits_32(S10_CCU_NOC_IOM_RAMSPACE0_0, 0x03);
+}
+
diff --git a/plat/intel/soc/stratix10/stratix10_image_load.c b/plat/intel/soc/stratix10/stratix10_image_load.c
new file mode 100644
index 0000000..67c02bc
--- /dev/null
+++ b/plat/intel/soc/stratix10/stratix10_image_load.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/desc_image_load.h>
+
+/*******************************************************************************
+ * This function flushes the data structures so that they are visible
+ * in memory for the next BL image.
+ ******************************************************************************/
+void plat_flush_next_bl_params(void)
+{
+	flush_bl_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of loadable images.
+ ******************************************************************************/
+bl_load_info_t *plat_get_bl_image_load_info(void)
+{
+	return get_bl_load_info_from_mem_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images.
+ ******************************************************************************/
+bl_params_t *plat_get_next_bl_params(void)
+{
+	return get_next_bl_params_from_mem_params_desc();
+}