diff --git a/plat/nxp/soc-ls1088a/soc.c b/plat/nxp/soc-ls1088a/soc.c
new file mode 100644
index 0000000..5f9f313
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/soc.c
@@ -0,0 +1,397 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <caam.h>
+#include <cci.h>
+#include <common/debug.h>
+#include <dcfg.h>
+#ifdef I2C_INIT
+#include <i2c.h>
+#endif
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <ls_interconnect.h>
+#if TRUSTED_BOARD_BOOT
+#include <nxp_smmu.h>
+#endif
+#include <nxp_timer.h>
+#include <plat_console.h>
+#include <plat_gic.h>
+#include <plat_tzc400.h>
+#include <pmu.h>
+#if defined(NXP_SFP_ENABLED)
+#include <sfp.h>
+#endif
+
+#include <errata.h>
+#ifdef CONFIG_OCRAM_ECC_EN
+#include <ocram.h>
+#endif
+#include <plat_common.h>
+#include <platform_def.h>
+#include <soc.h>
+
+static unsigned char _power_domain_tree_desc[NUMBER_OF_CLUSTERS + 2];
+static struct soc_type soc_list[] =  {
+	SOC_ENTRY(LS1044A, LS1044A, 1, 4),
+	SOC_ENTRY(LS1044AE, LS1044AE, 1, 4),
+	SOC_ENTRY(LS1048A, LS1048A, 1, 4),
+	SOC_ENTRY(LS1048AE, LS1048AE, 1, 4),
+	SOC_ENTRY(LS1084A, LS1084A, 2, 4),
+	SOC_ENTRY(LS1084AE, LS1084AE, 2, 4),
+	SOC_ENTRY(LS1088A, LS1088A, 2, 4),
+	SOC_ENTRY(LS1088AE, LS1088AE, 2, 4),
+};
+
+static dcfg_init_info_t dcfg_init_data = {
+	.g_nxp_dcfg_addr = NXP_DCFG_ADDR,
+	.nxp_sysclk_freq = NXP_SYSCLK_FREQ,
+	.nxp_ddrclk_freq = NXP_DDRCLK_FREQ,
+	.nxp_plat_clk_divider = NXP_PLATFORM_CLK_DIVIDER,
+};
+
+/*
+ * This function dynamically constructs the topology according to
+ *  SoC Flavor and returns it.
+ */
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	unsigned int i;
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+	/*
+	 * The highest level is the system level. The next level is constituted
+	 * by clusters and then cores in clusters.
+	 */
+	_power_domain_tree_desc[0] = 1;
+	_power_domain_tree_desc[1] = num_clusters;
+
+	for (i = 0; i < _power_domain_tree_desc[1]; i++) {
+		_power_domain_tree_desc[i + 2] = cores_per_cluster;
+	}
+
+
+	return _power_domain_tree_desc;
+}
+
+CASSERT(NUMBER_OF_CLUSTERS && NUMBER_OF_CLUSTERS <= 256,
+		assert_invalid_ls1088a_cluster_count);
+
+/*
+ * This function returns the core count within the cluster corresponding to
+ * `mpidr`.
+ */
+unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr)
+{
+	return CORES_PER_CLUSTER;
+}
+
+/*
+ * This function returns the total number of cores in the SoC
+ */
+unsigned int get_tot_num_cores(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+	return (num_clusters * cores_per_cluster);
+}
+
+/*
+ * This function returns the PMU IDLE Cluster mask.
+ */
+unsigned int get_pmu_idle_cluster_mask(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+	return ((1 << num_clusters) - 2);
+}
+
+/*
+ * This function returns the PMU Flush Cluster mask.
+ */
+unsigned int get_pmu_flush_cluster_mask(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+	return ((1 << num_clusters) - 2);
+}
+
+/*
+ * This function returns the PMU IDLE Core mask.
+ */
+unsigned int get_pmu_idle_core_mask(void)
+{
+	return ((1 << get_tot_num_cores()) - 2);
+}
+
+#ifdef IMAGE_BL2
+
+void soc_bl2_prepare_exit(void)
+{
+#if defined(NXP_SFP_ENABLED) && defined(DISABLE_FUSE_WRITE)
+	set_sfp_wr_disable();
+#endif
+}
+
+void soc_preload_setup(void)
+{
+
+}
+
+/*
+ * This function returns the boot device based on RCW_SRC
+ */
+enum boot_device get_boot_dev(void)
+{
+	enum boot_device src = BOOT_DEVICE_NONE;
+	uint32_t porsr1;
+	uint32_t rcw_src, val;
+
+	porsr1 = read_reg_porsr1();
+
+	rcw_src = (porsr1 & PORSR1_RCW_MASK) >> PORSR1_RCW_SHIFT;
+
+	/* RCW SRC NOR */
+	val = rcw_src & RCW_SRC_TYPE_MASK;
+	if (val == NOR_16B_VAL) {
+		src = BOOT_DEVICE_IFC_NOR;
+		INFO("RCW BOOT SRC is IFC NOR\n");
+	} else {
+		val = rcw_src & RCW_SRC_SERIAL_MASK;
+		switch (val) {
+		case QSPI_VAL:
+			src = BOOT_DEVICE_QSPI;
+			INFO("RCW BOOT SRC is QSPI\n");
+			break;
+		case SDHC_VAL:
+			src = BOOT_DEVICE_EMMC;
+			INFO("RCW BOOT SRC is SD/EMMC\n");
+			break;
+		case EMMC_VAL:
+			src = BOOT_DEVICE_EMMC;
+			INFO("RCW BOOT SRC is SD/EMMC\n");
+			break;
+		default:
+			src = BOOT_DEVICE_NONE;
+		}
+	}
+
+	return src;
+}
+
+/*
+ * This function sets up access permissions on memory regions
+ */
+void soc_mem_access(void)
+{
+	dram_regions_info_t *info_dram_regions = get_dram_regions_info();
+	int i = 0;
+	struct tzc400_reg tzc400_reg_list[MAX_NUM_TZC_REGION];
+	int dram_idx, index = 1;
+
+	for (dram_idx = 0; dram_idx < info_dram_regions->num_dram_regions;
+	     dram_idx++) {
+		if (info_dram_regions->region[i].size == 0) {
+			ERROR("DDR init failure, or");
+			ERROR("DRAM regions not populated correctly.\n");
+			break;
+		}
+
+		index = populate_tzc400_reg_list(tzc400_reg_list,
+				dram_idx, index,
+				info_dram_regions->region[dram_idx].addr,
+				info_dram_regions->region[dram_idx].size,
+				NXP_SECURE_DRAM_SIZE, NXP_SP_SHRD_DRAM_SIZE);
+	}
+
+	mem_access_setup(NXP_TZC_ADDR, index,
+			 tzc400_reg_list);
+}
+
+/*
+ * This function implements soc specific erratum
+ * This is called before DDR is initialized or MMU is enabled
+ */
+void soc_early_init(void)
+{
+	enum boot_device dev;
+	dram_regions_info_t *dram_regions_info = get_dram_regions_info();
+
+#ifdef CONFIG_OCRAM_ECC_EN
+	ocram_init(NXP_OCRAM_ADDR, NXP_OCRAM_SIZE);
+#endif
+	dcfg_init(&dcfg_init_data);
+#if LOG_LEVEL > 0
+	/* Initialize the console to provide early debug support */
+	plat_console_init(NXP_CONSOLE_ADDR,
+			  NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE);
+#endif
+	enable_timer_base_to_cluster(NXP_PMU_ADDR);
+	enable_core_tb(NXP_PMU_ADDR);
+
+	/*
+	 * Use the region(NXP_SD_BLOCK_BUF_ADDR + NXP_SD_BLOCK_BUF_SIZE)
+	 * as dma of sd
+	 */
+	dev = get_boot_dev();
+	if (dev == BOOT_DEVICE_EMMC) {
+		mmap_add_region(NXP_SD_BLOCK_BUF_ADDR, NXP_SD_BLOCK_BUF_ADDR,
+				NXP_SD_BLOCK_BUF_SIZE,
+				MT_DEVICE | MT_RW | MT_NS);
+	}
+
+#if TRUSTED_BOARD_BOOT
+	uint32_t mode;
+
+	sfp_init(NXP_SFP_ADDR);
+	/*
+	 * For secure boot disable SMMU.
+	 * Later when platform security policy comes in picture,
+	 * this might get modified based on the policy
+	 */
+	if (check_boot_mode_secure(&mode) == true) {
+		bypass_smmu(NXP_SMMU_ADDR);
+	}
+
+	/*
+	 * For Mbedtls currently crypto is not supported via CAAM
+	 * enable it when that support is there. In tbbr.mk
+	 * the CAAM_INTEG is set as 0.
+	 */
+#ifndef MBEDTLS_X509
+	/* Initialize the crypto accelerator if enabled */
+	if (is_sec_enabled() == false) {
+		INFO("SEC is disabled.\n");
+	} else {
+		sec_init(NXP_CAAM_ADDR);
+	}
+#endif
+#endif
+
+	soc_errata();
+
+	delay_timer_init(NXP_TIMER_ADDR);
+	i2c_init(NXP_I2C_ADDR);
+	dram_regions_info->total_dram_size = init_ddr();
+}
+#else /* !IMAGE_BL2 */
+
+void soc_early_platform_setup2(void)
+{
+	dcfg_init(&dcfg_init_data);
+	/*
+	 * Initialize system level generic timer for Socs
+	 */
+	delay_timer_init(NXP_TIMER_ADDR);
+
+#if LOG_LEVEL > 0
+	/* Initialize the console to provide early debug support */
+	plat_console_init(NXP_CONSOLE_ADDR,
+			  NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE);
+#endif
+}
+
+void soc_platform_setup(void)
+{
+	/* Initialize the GIC driver, cpu and distributor interfaces */
+	static uintptr_t target_mask_array[PLATFORM_CORE_COUNT];
+	static interrupt_prop_t ls_interrupt_props[] = {
+		PLAT_LS_G1S_IRQ_PROPS(INTR_GROUP1S),
+		PLAT_LS_G0_IRQ_PROPS(INTR_GROUP0)
+	};
+
+	plat_ls_gic_driver_init(NXP_GICD_ADDR, NXP_GICR_ADDR,
+				PLATFORM_CORE_COUNT,
+				ls_interrupt_props,
+				ARRAY_SIZE(ls_interrupt_props),
+				target_mask_array,
+				plat_core_pos);
+
+	plat_ls_gic_init();
+	enable_init_timer();
+}
+
+/*
+ * This function initializes the soc from the BL31 module
+ */
+void soc_init(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	/* low-level init of the soc */
+	soc_init_lowlevel();
+	_init_global_data();
+	soc_init_percpu();
+	_initialize_psci();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	cci_init(NXP_CCI_ADDR, cci_map, ARRAY_SIZE(cci_map));
+
+	/*
+	 * Enable Interconnect coherency for the primary CPU's cluster.
+	 */
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+	plat_ls_interconnect_enter_coherency(num_clusters);
+
+	/* set platform security policies */
+	_set_platform_security();
+
+	/* Initialize the crypto accelerator if enabled */
+	if (is_sec_enabled() == false) {
+		INFO("SEC is disabled.\n");
+	} else {
+		sec_init(NXP_CAAM_ADDR);
+	}
+}
+
+void soc_runtime_setup(void)
+{
+
+}
+#endif /* IMAGE_BL2 */
+
+/*
+ * Function to return the SoC SYS CLK
+ */
+unsigned int get_sys_clk(void)
+{
+	return NXP_SYSCLK_FREQ;
+}
+
+/*
+ * Function returns the base counter frequency
+ * after reading the first entry at CNTFID0 (0x20 offset).
+ *
+ * Function is used by:
+ *   1. ARM common code for PSCI management.
+ *   2. ARM Generic Timer init.
+ */
+unsigned int plat_get_syscnt_freq2(void)
+{
+	unsigned int counter_base_frequency;
+	/*
+	 * Below register specifies the base frequency of the system counter.
+	 * As per NXP Board Manuals:
+	 * The system counter always works with SYS_REF_CLK/4 frequency clock.
+	 */
+	counter_base_frequency = mmio_read_32(NXP_TIMER_ADDR + CNTFID_OFF);
+
+	return counter_base_frequency;
+}