diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
index 86f4c77..d10425b 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.c
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -30,7 +30,7 @@
 /* COMPHY speed macro */
 #define COMPHY_SPEED_1_25G		0 /* SGMII 1G */
 #define COMPHY_SPEED_2_5G		1
-#define COMPHY_SPEED_3_125G		2 /* SGMII 2.5G */
+#define COMPHY_SPEED_3_125G		2 /* 2500Base-X */
 #define COMPHY_SPEED_5G			3
 #define COMPHY_SPEED_5_15625G		4 /* XFI 5G */
 #define COMPHY_SPEED_6G			5
@@ -191,7 +191,7 @@
 		case(3):
 			/* For comphy 3:
 			 * 0x1 = RXAUI_Lane1
-			 * 0x2 = SGMII/HS-SGMII Port1
+			 * 0x2 = SGMII/Base-X Port1
 			 */
 			if (mode == COMPHY_RXAUI_MODE)
 				reg |= COMMON_SELECTOR_COMPHY3_RXAUI <<
@@ -202,20 +202,20 @@
 			break;
 		case(4):
 			 /* For comphy 4:
-			  * 0x1 = SGMII/HS-SGMII Port1, XFI1/SFI1
-			  * 0x2 = SGMII/HS-SGMII Port0: XFI0/SFI0, RXAUI_Lane0
+			  * 0x1 = SGMII/Base-X Port1, XFI1/SFI1
+			  * 0x2 = SGMII/Base-X Port0: XFI0/SFI0, RXAUI_Lane0
 			  *
-			  * We want to check if SGMII1/HS_SGMII1 is the
+			  * We want to check if SGMII1 is the
 			  * requested mode in order to determine which value
 			  * should be set (all other modes use the same value)
 			  * so we need to strip the mode, and check the ID
-			  * because we might handle SGMII0/HS_SGMII0 too.
+			  * because we might handle SGMII0 too.
 			  */
 			  /* TODO: need to distinguish between CP110 and CP115
 			   * as SFI1/XFI1 available only for CP115.
 			   */
 			if ((mode == COMPHY_SGMII_MODE ||
-			     mode == COMPHY_HS_SGMII_MODE ||
+			     mode == COMPHY_2500BASEX_MODE ||
 			     mode == COMPHY_SFI_MODE ||
 			     mode == COMPHY_XFI_MODE ||
 			     mode == COMPHY_AP_MODE)
@@ -228,7 +228,7 @@
 			break;
 		case(5):
 			/* For comphy 5:
-			 * 0x1 = SGMII/HS-SGMII Port2
+			 * 0x1 = SGMII/Base-X Port2
 			 * 0x2 = RXAUI Lane1
 			 */
 			if (mode == COMPHY_RXAUI_MODE)
@@ -713,7 +713,7 @@
 		data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
 		data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
 	} else if (sgmii_speed == COMPHY_SPEED_3_125G) {
-		/* HS SGMII (2.5G), SerDes speed 3.125G */
+		/* 2500Base-X, SerDes speed 3.125G */
 		data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
 		data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
 	} else {
@@ -2343,7 +2343,7 @@
 
 	switch (mode) {
 	case (COMPHY_SGMII_MODE):
-	case (COMPHY_HS_SGMII_MODE):
+	case (COMPHY_2500BASEX_MODE):
 	case (COMPHY_XFI_MODE):
 	case (COMPHY_SFI_MODE):
 	case (COMPHY_RXAUI_MODE):
@@ -2378,7 +2378,7 @@
 						       comphy_mode);
 		break;
 	case(COMPHY_SGMII_MODE):
-	case(COMPHY_HS_SGMII_MODE):
+	case(COMPHY_2500BASEX_MODE):
 		err = mvebu_cp110_comphy_sgmii_power_on(comphy_base,
 							comphy_index,
 							comphy_mode);