blob: e3dc81108e1535bcd7ab5f6f2601365c23c3d202 [file] [log] [blame]
/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef PLATFORM_DEF_H
#define PLATFORM_DEF_H
/* Enable the dynamic translation tables library. */
#define PLAT_XLAT_TABLES_DYNAMIC 1
#include <common_def.h>
#include <qti_board_def.h>
#include <qtiseclib_defs_plat.h>
/*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------*/
/*
* MPIDR_PRIMARY_CPU
* You just need to have the correct core_affinity_val i.e. [7:0]
* and cluster_affinity_val i.e. [15:8]
* the other bits will be ignored
*/
/*----------------------------------------------------------------------------*/
#define MPIDR_PRIMARY_CPU 0x0000
/*----------------------------------------------------------------------------*/
#define QTI_PWR_LVL0 MPIDR_AFFLVL0
#define QTI_PWR_LVL1 MPIDR_AFFLVL1
#define QTI_PWR_LVL2 MPIDR_AFFLVL2
#define QTI_PWR_LVL3 MPIDR_AFFLVL3
/*
* Macros for local power states encoded by State-ID field
* within the power-state parameter.
*/
/* Local power state for power domains in Run state. */
#define QTI_LOCAL_STATE_RUN 0
/*
* Local power state for clock-gating. Valid only for CPU and not cluster power
* domains
*/
#define QTI_LOCAL_STATE_STB 1
/*
* Local power state for retention. Valid for CPU and cluster power
* domains
*/
#define QTI_LOCAL_STATE_RET 2
/*
* Local power state for OFF/power down. Valid for CPU, cluster, RSC and PDC
* power domains
*/
#define QTI_LOCAL_STATE_OFF 3
/*
* Local power state for DEEPOFF/power rail down. Valid for CPU, cluster and RSC
* power domains
*/
#define QTI_LOCAL_STATE_DEEPOFF 4
/*
* This macro defines the deepest retention state possible. A higher state
* id will represent an invalid or a power down state.
*/
#define PLAT_MAX_RET_STATE QTI_LOCAL_STATE_RET
/*
* This macro defines the deepest power down states possible. Any state ID
* higher than this is invalid.
*/
#define PLAT_MAX_OFF_STATE QTI_LOCAL_STATE_DEEPOFF
/******************************************************************************
* Required platform porting definitions common to all ARM standard platforms
*****************************************************************************/
/*
* Platform specific page table and MMU setup constants.
*/
#define MAX_MMAP_REGIONS (PLAT_QTI_MMAP_ENTRIES)
#define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 36)
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 36)
#define ARM_CACHE_WRITEBACK_SHIFT 6
/*
* Some data must be aligned on the biggest cache line size in the platform.
* This is known only to the platform as it might have a combination of
* integrated and external caches.
*/
#define CACHE_WRITEBACK_GRANULE (1 << ARM_CACHE_WRITEBACK_SHIFT)
/*
* One cache line needed for bakery locks on ARM platforms
*/
#define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE)
/*----------------------------------------------------------------------------*/
/* PSCI power domain topology definitions */
/*----------------------------------------------------------------------------*/
/* One domain each to represent RSC and PDC level */
#define PLAT_PDC_COUNT 1
#define PLAT_RSC_COUNT 1
/* There is one top-level FCM cluster */
#define PLAT_CLUSTER_COUNT 1
/* No. of cores in the FCM cluster */
#define PLAT_CLUSTER0_CORE_COUNT 8
#define PLATFORM_CORE_COUNT (PLAT_CLUSTER0_CORE_COUNT)
#define PLAT_NUM_PWR_DOMAINS (PLAT_PDC_COUNT +\
PLAT_RSC_COUNT +\
PLAT_CLUSTER_COUNT +\
PLATFORM_CORE_COUNT)
#define PLAT_MAX_PWR_LVL 3
/*****************************************************************************/
/* Memory mapped Generic timer interfaces */
/*****************************************************************************/
/*----------------------------------------------------------------------------*/
/* GIC-600 constants */
/*----------------------------------------------------------------------------*/
#define BASE_GICD_BASE 0x17A00000
#define BASE_GICR_BASE 0x17A60000
#define BASE_GICC_BASE 0x0
#define BASE_GICH_BASE 0x0
#define BASE_GICV_BASE 0x0
#define QTI_GICD_BASE BASE_GICD_BASE
#define QTI_GICR_BASE BASE_GICR_BASE
#define QTI_GICC_BASE BASE_GICC_BASE
/*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------*/
/* UART related constants. */
/*----------------------------------------------------------------------------*/
/* BASE ADDRESS OF DIFFERENT REGISTER SPACES IN HW */
#define GENI4_CFG 0x0
#define GENI4_IMAGE_REGS 0x100
#define GENI4_DATA 0x600
/* COMMON STATUS/CONFIGURATION REGISTERS AND MASKS */
#define GENI_STATUS_REG (GENI4_CFG + 0x00000040)
#define GENI_STATUS_M_GENI_CMD_ACTIVE_MASK (0x1)
#define UART_TX_TRANS_LEN_REG (GENI4_IMAGE_REGS + 0x00000170)
/* MASTER/TX ENGINE REGISTERS */
#define GENI_M_CMD0_REG (GENI4_DATA + 0x00000000)
/* FIFO, STATUS REGISTERS AND MASKS */
#define GENI_TX_FIFOn_REG (GENI4_DATA + 0x00000100)
#define GENI_M_CMD_TX (0x08000000)
/*----------------------------------------------------------------------------*/
/* Device address space for mapping. Excluding starting 4K */
/*----------------------------------------------------------------------------*/
#define QTI_DEVICE_BASE 0x1000
#define QTI_DEVICE_SIZE (0x80000000 - QTI_DEVICE_BASE)
/*******************************************************************************
* BL31 specific defines.
******************************************************************************/
/*
* Put BL31 at DDR as per memory map. BL31_BASE is calculated using the
* current BL31 debug size plus a little space for growth.
*/
#define BL31_LIMIT (BL31_BASE + BL31_SIZE)
/*----------------------------------------------------------------------------*/
/* AOSS registers */
/*----------------------------------------------------------------------------*/
#define QTI_PS_HOLD_REG 0x0C264000
/*----------------------------------------------------------------------------*/
/* AOP CMD DB address space for mapping */
/*----------------------------------------------------------------------------*/
#define QTI_AOP_CMD_DB_BASE 0x80820000
#define QTI_AOP_CMD_DB_SIZE 0x00020000
/*----------------------------------------------------------------------------*/
/* SOC hw version register */
/*----------------------------------------------------------------------------*/
#define QTI_SOC_VERSION U(0x7180)
#define QTI_SOC_VERSION_MASK U(0xFFFF)
#define QTI_SOC_REVISION_REG 0x1FC8000
#define QTI_SOC_REVISION_MASK U(0xFFFF)
/*----------------------------------------------------------------------------*/
/* LC PON register offsets */
/*----------------------------------------------------------------------------*/
#define PON_PS_HOLD_RESET_CTL 0x85a
#define PON_PS_HOLD_RESET_CTL2 0x85b
/*----------------------------------------------------------------------------*/
#endif /* PLATFORM_DEF_H */