blob: e5ea88c4ec7f6823de28f2e135210e247961fa72 [file] [log] [blame]
/*
* Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <platform_def.h>
#include <arch.h>
#include <asm_macros.S>
#include <bl32/tsp/tsp.h>
#include <lib/xlat_tables/xlat_tables_defs.h>
#include <smccc_helpers.h>
#include "../tsp_private.h"
.globl tsp_entrypoint
.globl tsp_vector_table
#if SPMC_AT_EL3
.globl tsp_cpu_on_entry
#endif
/* ---------------------------------------------
* Populate the params in x0-x7 from the pointer
* to the smc args structure in x0.
* ---------------------------------------------
*/
.macro restore_args_call_smc
ldp x6, x7, [x0, #SMC_ARG6]
ldp x4, x5, [x0, #SMC_ARG4]
ldp x2, x3, [x0, #SMC_ARG2]
ldp x0, x1, [x0, #SMC_ARG0]
smc #0
.endm
.macro save_eret_context reg1 reg2
mrs \reg1, elr_el1
mrs \reg2, spsr_el1
stp \reg1, \reg2, [sp, #-0x10]!
stp x30, x18, [sp, #-0x10]!
.endm
.macro restore_eret_context reg1 reg2
ldp x30, x18, [sp], #0x10
ldp \reg1, \reg2, [sp], #0x10
msr elr_el1, \reg1
msr spsr_el1, \reg2
.endm
func tsp_entrypoint _align=3
#if ENABLE_PIE
/*
* ------------------------------------------------------------
* If PIE is enabled fixup the Global descriptor Table only
* once during primary core cold boot path.
*
* Compile time base address, required for fixup, is calculated
* using "pie_fixup" label present within first page.
* ------------------------------------------------------------
*/
pie_fixup:
ldr x0, =pie_fixup
and x0, x0, #~(PAGE_SIZE_MASK)
mov_imm x1, (BL32_LIMIT - BL32_BASE)
add x1, x1, x0
bl fixup_gdt_reloc
#endif /* ENABLE_PIE */
/* ---------------------------------------------
* Set the exception vector to something sane.
* ---------------------------------------------
*/
adr x0, tsp_exceptions
msr vbar_el1, x0
isb
/* ---------------------------------------------
* Enable the SError interrupt now that the
* exception vectors have been setup.
* ---------------------------------------------
*/
msr daifclr, #DAIF_ABT_BIT
/* ---------------------------------------------
* Enable the instruction cache, stack pointer
* and data access alignment checks and disable
* speculative loads.
* ---------------------------------------------
*/
mov x1, #(SCTLR_I_BIT | SCTLR_A_BIT | SCTLR_SA_BIT)
mrs x0, sctlr_el1
orr x0, x0, x1
bic x0, x0, #SCTLR_DSSBS_BIT
msr sctlr_el1, x0
isb
/* ---------------------------------------------
* Invalidate the RW memory used by the BL32
* image. This includes the data and NOBITS
* sections. This is done to safeguard against
* possible corruption of this memory by dirty
* cache lines in a system cache as a result of
* use by an earlier boot loader stage. If PIE
* is enabled however, RO sections including the
* GOT may be modified during pie fixup.
* Therefore, to be on the safe side, invalidate
* the entire image region if PIE is enabled.
* ---------------------------------------------
*/
#if ENABLE_PIE
#if SEPARATE_CODE_AND_RODATA
adrp x0, __TEXT_START__
add x0, x0, :lo12:__TEXT_START__
#else
adrp x0, __RO_START__
add x0, x0, :lo12:__RO_START__
#endif /* SEPARATE_CODE_AND_RODATA */
#else
adrp x0, __RW_START__
add x0, x0, :lo12:__RW_START__
#endif /* ENABLE_PIE */
adrp x1, __RW_END__
add x1, x1, :lo12:__RW_END__
sub x1, x1, x0
bl inv_dcache_range
/* ---------------------------------------------
* Zero out NOBITS sections. There are 2 of them:
* - the .bss section;
* - the coherent memory section.
* ---------------------------------------------
*/
adrp x0, __BSS_START__
add x0, x0, :lo12:__BSS_START__
adrp x1, __BSS_END__
add x1, x1, :lo12:__BSS_END__
sub x1, x1, x0
bl zeromem
#if USE_COHERENT_MEM
adrp x0, __COHERENT_RAM_START__
add x0, x0, :lo12:__COHERENT_RAM_START__
adrp x1, __COHERENT_RAM_END_UNALIGNED__
add x1, x1, :lo12:__COHERENT_RAM_END_UNALIGNED__
sub x1, x1, x0
bl zeromem
#endif
/* --------------------------------------------
* Allocate a stack whose memory will be marked
* as Normal-IS-WBWA when the MMU is enabled.
* There is no risk of reading stale stack
* memory after enabling the MMU as only the
* primary cpu is running at the moment.
* --------------------------------------------
*/
bl plat_set_my_stack
/* ---------------------------------------------
* Initialize the stack protector canary before
* any C code is called.
* ---------------------------------------------
*/
#if STACK_PROTECTOR_ENABLED
bl update_stack_protector_canary
#endif
/* ---------------------------------------------
* Perform TSP setup
* ---------------------------------------------
*/
bl tsp_setup
#if ENABLE_PAUTH
/* ---------------------------------------------
* Program APIAKey_EL1
* and enable pointer authentication
* ---------------------------------------------
*/
bl pauth_init_enable_el1
#endif /* ENABLE_PAUTH */
/* ---------------------------------------------
* Jump to main function.
* ---------------------------------------------
*/
bl tsp_main
/* ---------------------------------------------
* Tell TSPD that we are done initialising
* ---------------------------------------------
*/
mov x1, x0
mov x0, #TSP_ENTRY_DONE
smc #0
tsp_entrypoint_panic:
b tsp_entrypoint_panic
endfunc tsp_entrypoint
/* -------------------------------------------
* Table of entrypoint vectors provided to the
* TSPD for the various entrypoints
* -------------------------------------------
*/
vector_base tsp_vector_table
b tsp_yield_smc_entry
b tsp_fast_smc_entry
b tsp_cpu_on_entry
b tsp_cpu_off_entry
b tsp_cpu_resume_entry
b tsp_cpu_suspend_entry
b tsp_sel1_intr_entry
b tsp_system_off_entry
b tsp_system_reset_entry
b tsp_abort_yield_smc_entry
/*---------------------------------------------
* This entrypoint is used by the TSPD when this
* cpu is to be turned off through a CPU_OFF
* psci call to ask the TSP to perform any
* bookeeping necessary. In the current
* implementation, the TSPD expects the TSP to
* re-initialise its state so nothing is done
* here except for acknowledging the request.
* ---------------------------------------------
*/
func tsp_cpu_off_entry
bl tsp_cpu_off_main
restore_args_call_smc
endfunc tsp_cpu_off_entry
/*---------------------------------------------
* This entrypoint is used by the TSPD when the
* system is about to be switched off (through
* a SYSTEM_OFF psci call) to ask the TSP to
* perform any necessary bookkeeping.
* ---------------------------------------------
*/
func tsp_system_off_entry
bl tsp_system_off_main
restore_args_call_smc
endfunc tsp_system_off_entry
/*---------------------------------------------
* This entrypoint is used by the TSPD when the
* system is about to be reset (through a
* SYSTEM_RESET psci call) to ask the TSP to
* perform any necessary bookkeeping.
* ---------------------------------------------
*/
func tsp_system_reset_entry
bl tsp_system_reset_main
restore_args_call_smc
endfunc tsp_system_reset_entry
/*---------------------------------------------
* This entrypoint is used by the TSPD when this
* cpu is turned on using a CPU_ON psci call to
* ask the TSP to initialise itself i.e. setup
* the mmu, stacks etc. Minimal architectural
* state will be initialised by the TSPD when
* this function is entered i.e. Caches and MMU
* will be turned off, the execution state
* will be aarch64 and exceptions masked.
* ---------------------------------------------
*/
func tsp_cpu_on_entry
/* ---------------------------------------------
* Set the exception vector to something sane.
* ---------------------------------------------
*/
adr x0, tsp_exceptions
msr vbar_el1, x0
isb
/* Enable the SError interrupt */
msr daifclr, #DAIF_ABT_BIT
/* ---------------------------------------------
* Enable the instruction cache, stack pointer
* and data access alignment checks
* ---------------------------------------------
*/
mov x1, #(SCTLR_I_BIT | SCTLR_A_BIT | SCTLR_SA_BIT)
mrs x0, sctlr_el1
orr x0, x0, x1
msr sctlr_el1, x0
isb
/* --------------------------------------------
* Give ourselves a stack whose memory will be
* marked as Normal-IS-WBWA when the MMU is
* enabled.
* --------------------------------------------
*/
bl plat_set_my_stack
/* --------------------------------------------
* Enable MMU and D-caches together.
* --------------------------------------------
*/
mov x0, #0
bl bl32_plat_enable_mmu
#if ENABLE_PAUTH
/* ---------------------------------------------
* Program APIAKey_EL1
* and enable pointer authentication
* ---------------------------------------------
*/
bl pauth_init_enable_el1
#endif /* ENABLE_PAUTH */
/* ---------------------------------------------
* Enter C runtime to perform any remaining
* book keeping
* ---------------------------------------------
*/
bl tsp_cpu_on_main
restore_args_call_smc
/* Should never reach here */
tsp_cpu_on_entry_panic:
b tsp_cpu_on_entry_panic
endfunc tsp_cpu_on_entry
/*---------------------------------------------
* This entrypoint is used by the TSPD when this
* cpu is to be suspended through a CPU_SUSPEND
* psci call to ask the TSP to perform any
* bookeeping necessary. In the current
* implementation, the TSPD saves and restores
* the EL1 state.
* ---------------------------------------------
*/
func tsp_cpu_suspend_entry
bl tsp_cpu_suspend_main
restore_args_call_smc
endfunc tsp_cpu_suspend_entry
/*-------------------------------------------------
* This entrypoint is used by the TSPD to pass
* control for `synchronously` handling a S-EL1
* Interrupt which was triggered while executing
* in normal world. 'x0' contains a magic number
* which indicates this. TSPD expects control to
* be handed back at the end of interrupt
* processing. This is done through an SMC.
* The handover agreement is:
*
* 1. PSTATE.DAIF are set upon entry. 'x1' has
* the ELR_EL3 from the non-secure state.
* 2. TSP has to preserve the callee saved
* general purpose registers, SP_EL1/EL0 and
* LR.
* 3. TSP has to preserve the system and vfp
* registers (if applicable).
* 4. TSP can use 'x0-x18' to enable its C
* runtime.
* 5. TSP returns to TSPD using an SMC with
* 'x0' = TSP_HANDLED_S_EL1_INTR
* ------------------------------------------------
*/
func tsp_sel1_intr_entry
#if DEBUG
mov_imm x2, TSP_HANDLE_SEL1_INTR_AND_RETURN
cmp x0, x2
b.ne tsp_sel1_int_entry_panic
#endif
/*-------------------------------------------------
* Save any previous context needed to perform
* an exception return from S-EL1 e.g. context
* from a previous Non secure Interrupt.
* Update statistics and handle the S-EL1
* interrupt before returning to the TSPD.
* IRQ/FIQs are not enabled since that will
* complicate the implementation. Execution
* will be transferred back to the normal world
* in any case. The handler can return 0
* if the interrupt was handled or TSP_PREEMPTED
* if the expected interrupt was preempted
* by an interrupt that should be handled in EL3
* e.g. Group 0 interrupt in GICv3. In both
* the cases switch to EL3 using SMC with id
* TSP_HANDLED_S_EL1_INTR. Any other return value
* from the handler will result in panic.
* ------------------------------------------------
*/
save_eret_context x2 x3
bl tsp_update_sync_sel1_intr_stats
bl tsp_common_int_handler
/* Check if the S-EL1 interrupt has been handled */
cbnz x0, tsp_sel1_intr_check_preemption
b tsp_sel1_intr_return
tsp_sel1_intr_check_preemption:
/* Check if the S-EL1 interrupt has been preempted */
mov_imm x1, TSP_PREEMPTED
cmp x0, x1
b.ne tsp_sel1_int_entry_panic
tsp_sel1_intr_return:
mov_imm x0, TSP_HANDLED_S_EL1_INTR
restore_eret_context x2 x3
smc #0
/* Should never reach here */
tsp_sel1_int_entry_panic:
no_ret plat_panic_handler
endfunc tsp_sel1_intr_entry
/*---------------------------------------------
* This entrypoint is used by the TSPD when this
* cpu resumes execution after an earlier
* CPU_SUSPEND psci call to ask the TSP to
* restore its saved context. In the current
* implementation, the TSPD saves and restores
* EL1 state so nothing is done here apart from
* acknowledging the request.
* ---------------------------------------------
*/
func tsp_cpu_resume_entry
bl tsp_cpu_resume_main
restore_args_call_smc
/* Should never reach here */
no_ret plat_panic_handler
endfunc tsp_cpu_resume_entry
/*---------------------------------------------
* This entrypoint is used by the TSPD to ask
* the TSP to service a fast smc request.
* ---------------------------------------------
*/
func tsp_fast_smc_entry
bl tsp_smc_handler
restore_args_call_smc
/* Should never reach here */
no_ret plat_panic_handler
endfunc tsp_fast_smc_entry
/*---------------------------------------------
* This entrypoint is used by the TSPD to ask
* the TSP to service a Yielding SMC request.
* We will enable preemption during execution
* of tsp_smc_handler.
* ---------------------------------------------
*/
func tsp_yield_smc_entry
msr daifclr, #DAIF_FIQ_BIT | DAIF_IRQ_BIT
bl tsp_smc_handler
msr daifset, #DAIF_FIQ_BIT | DAIF_IRQ_BIT
restore_args_call_smc
/* Should never reach here */
no_ret plat_panic_handler
endfunc tsp_yield_smc_entry
/*---------------------------------------------------------------------
* This entrypoint is used by the TSPD to abort a pre-empted Yielding
* SMC. It could be on behalf of non-secure world or because a CPU
* suspend/CPU off request needs to abort the preempted SMC.
* --------------------------------------------------------------------
*/
func tsp_abort_yield_smc_entry
/*
* Exceptions masking is already done by the TSPD when entering this
* hook so there is no need to do it here.
*/
/* Reset the stack used by the pre-empted SMC */
bl plat_set_my_stack
/*
* Allow some cleanup such as releasing locks.
*/
bl tsp_abort_smc_handler
restore_args_call_smc
/* Should never reach here */
bl plat_panic_handler
endfunc tsp_abort_yield_smc_entry