diff --git a/drivers/arm/scu/scu.c b/drivers/arm/scu/scu.c
new file mode 100644
index 0000000..aceac92
--- /dev/null
+++ b/drivers/arm/scu/scu.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <drivers/arm/scu.h>
+#include <lib/mmio.h>
+#include <plat/common/platform.h>
+#include <stdint.h>
+
+/*******************************************************************************
+ * Turn ON snoop control unit. This is needed to synchronize the data between
+ * CPU's.
+ ******************************************************************************/
+void enable_snoop_ctrl_unit(uintptr_t base)
+{
+	uint32_t scu_ctrl;
+
+	INFO("[SCU]: enabling snoop control unit ... \n");
+
+	assert(base != 0U);
+	scu_ctrl = mmio_read_32(base + SCU_CTRL_REG);
+
+	/* already enabled? */
+	if ((scu_ctrl & SCU_ENABLE_BIT) != 0) {
+		return;
+	}
+
+	scu_ctrl |= SCU_ENABLE_BIT;
+	mmio_write_32(base + SCU_CTRL_REG, scu_ctrl);
+}
+
+/*******************************************************************************
+ * Snoop Control Unit configuration register. This is read-only register and
+ * contains information such as
+ * - number of CPUs present
+ * - is a particular CPU operating in SMP mode or AMP mode
+ * - data cache size of a particular CPU
+ * - does SCU has ACP port
+ * - is L2CPRESENT
+ * NOTE: user of this API should interpert the bits in this register according
+ * to the TRM
+ ******************************************************************************/
+uint32_t read_snoop_ctrl_unit_cfg(uintptr_t base)
+{
+	assert(base != 0U);
+
+	return mmio_read_32(base + SCU_CFG_REG);
+}
diff --git a/include/drivers/arm/scu.h b/include/drivers/arm/scu.h
new file mode 100644
index 0000000..992539f
--- /dev/null
+++ b/include/drivers/arm/scu.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SCU_H
+#define SCU_H
+
+#include <stdint.h>
+
+#define SCU_CTRL_REG	0x00
+#define SCU_CFG_REG	0x04
+
+#define SCU_ENABLE_BIT	(1 << 0)
+
+void enable_snoop_ctrl_unit(uintptr_t base);
+uint32_t read_snoop_ctrl_unit_cfg(uintptr_t base);
+
+#endif /* SCU_H */
diff --git a/plat/arm/board/a5ds/a5ds_pm.c b/plat/arm/board/a5ds/a5ds_pm.c
index cc734b0..7774002 100644
--- a/plat/arm/board/a5ds/a5ds_pm.c
+++ b/plat/arm/board/a5ds/a5ds_pm.c
@@ -4,11 +4,10 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 #include <assert.h>
-
+#include <drivers/arm/gicv2.h>
 #include <lib/psci/psci.h>
 #include <plat/arm/common/plat_arm.h>
 #include <plat/common/platform.h>
-#include <drivers/arm/gicv2.h>
 
 /*******************************************************************************
  * Platform handler called when a power domain is about to be turned on. The
diff --git a/plat/arm/board/a5ds/include/platform_def.h b/plat/arm/board/a5ds/include/platform_def.h
index e9e4b9a..d200af6 100644
--- a/plat/arm/board/a5ds/include/platform_def.h
+++ b/plat/arm/board/a5ds/include/platform_def.h
@@ -334,6 +334,9 @@
 #define A5DS_HOLD_STATE_WAIT	0
 #define A5DS_HOLD_STATE_GO	1
 
+/* Snoop Control Unit base address */
+#define A5DS_SCU_BASE			0x1C000000
+
 /*
  * GIC related constants to cater for GICv2
  */
diff --git a/plat/arm/board/a5ds/sp_min/a5ds_sp_min_setup.c b/plat/arm/board/a5ds/sp_min/a5ds_sp_min_setup.c
index 8b45af8..a951dc7 100644
--- a/plat/arm/board/a5ds/sp_min/a5ds_sp_min_setup.c
+++ b/plat/arm/board/a5ds/sp_min/a5ds_sp_min_setup.c
@@ -4,12 +4,17 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
+#include <drivers/arm/scu.h>
 #include <plat/arm/common/plat_arm.h>
 
+
 void plat_arm_sp_min_early_platform_setup(u_register_t arg0, u_register_t arg1,
 			u_register_t arg2, u_register_t arg3)
 {
 	arm_sp_min_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
+
+	/* enable snoop control unit */
+	enable_snoop_ctrl_unit(A5DS_SCU_BASE);
 }
 
 /*
diff --git a/plat/arm/board/a5ds/sp_min/sp_min-a5ds.mk b/plat/arm/board/a5ds/sp_min/sp_min-a5ds.mk
index da1d785..4b0c97d 100644
--- a/plat/arm/board/a5ds/sp_min/sp_min-a5ds.mk
+++ b/plat/arm/board/a5ds/sp_min/sp_min-a5ds.mk
@@ -5,7 +5,8 @@
 #
 
 # SP_MIN source files specific to A5DS platform
-BL32_SOURCES	+=	drivers/cfi/v2m/v2m_flash.c			\
+BL32_SOURCES	+=	drivers/arm/scu/scu.c                           \
+			drivers/cfi/v2m/v2m_flash.c			\
 			lib/utils/mem_region.c				\
 			lib/aarch32/arm32_aeabi_divmod.c		\
 			lib/aarch32/arm32_aeabi_divmod_a32.S		\