diff --git a/drivers/st/i2c/stm32_i2c.c b/drivers/st/i2c/stm32_i2c.c
index 2be7afe..ed88052 100644
--- a/drivers/st/i2c/stm32_i2c.c
+++ b/drivers/st/i2c/stm32_i2c.c
@@ -8,10 +8,16 @@
 #include <stdbool.h>
 #include <stdlib.h>
 
-#include <arch_helpers.h>
+#include <libfdt.h>
+
+#include <platform_def.h>
+
+#include <common/debug.h>
 #include <drivers/delay_timer.h>
+#include <drivers/st/stm32_gpio.h>
 #include <drivers/st/stm32_i2c.h>
 #include <lib/mmio.h>
+#include <lib/utils.h>
 
 /* STM32 I2C registers offsets */
 #define I2C_CR1			0x00U
@@ -26,50 +32,122 @@
 #define I2C_RXDR		0x24U
 #define I2C_TXDR		0x28U
 
-#define MAX_DELAY		0xFFFFFFFFU
-
-/* I2C TIMING clear register Mask */
-#define TIMING_CLEAR_MASK	0xF0FFFFFFU
-/* Timeout 25 ms */
-#define I2C_TIMEOUT_BUSY	25U
+#define TIMINGR_CLEAR_MASK	0xF0FFFFFFU
 
 #define MAX_NBYTE_SIZE		255U
 
-static int i2c_request_memory_write(struct i2c_handle_s *hi2c,
-				    uint16_t dev_addr, uint16_t mem_addr,
-				    uint16_t mem_add_size, uint32_t timeout,
-				    uint32_t tick_start);
-static int i2c_request_memory_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
-				   uint16_t mem_addr, uint16_t mem_add_size,
-				   uint32_t timeout, uint32_t tick_start);
+#define I2C_NSEC_PER_SEC	1000000000L
 
-/* Private functions to handle flags during polling transfer */
-static int i2c_wait_flag(struct i2c_handle_s *hi2c, uint32_t flag,
-			 uint8_t awaited_value, uint32_t timeout,
-			 uint32_t tick_start);
-static int i2c_wait_txis(struct i2c_handle_s *hi2c, uint32_t timeout,
-			 uint32_t tick_start);
-static int i2c_wait_stop(struct i2c_handle_s *hi2c, uint32_t timeout,
-			 uint32_t tick_start);
-static int i2c_ack_failed(struct i2c_handle_s *hi2c, uint32_t timeout,
-			  uint32_t tick_start);
+/* I2C Timing hard-coded value, for I2C clock source is HSI at 64MHz */
+#define I2C_TIMING			0x10D07DB5
 
-/* Private function to flush TXDR register */
-static void i2c_flush_txdr(struct i2c_handle_s *hi2c);
+static void notif_i2c_timeout(struct i2c_handle_s *hi2c)
+{
+	hi2c->i2c_err |= I2C_ERROR_TIMEOUT;
+	hi2c->i2c_mode = I2C_MODE_NONE;
+	hi2c->i2c_state = I2C_STATE_READY;
+}
 
-/* Private function to start, restart or stop a transfer */
-static void i2c_transfer_config(struct i2c_handle_s *hi2c, uint16_t dev_addr,
-				uint16_t size, uint32_t i2c_mode,
-				uint32_t request);
+/*
+ * @brief  Configure I2C Analog noise filter.
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C peripheral.
+ * @param  analog_filter: New state of the Analog filter
+ * @retval 0 if OK, negative value else
+ */
+static int i2c_config_analog_filter(struct i2c_handle_s *hi2c,
+				    uint32_t analog_filter)
+{
+	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
+		return -EBUSY;
+	}
+
+	hi2c->lock = 1;
+
+	hi2c->i2c_state = I2C_STATE_BUSY;
+
+	/* Disable the selected I2C peripheral */
+	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_PE);
+
+	/* Reset I2Cx ANOFF bit */
+	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_ANFOFF);
+
+	/* Set analog filter bit*/
+	mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR1, analog_filter);
+
+	/* Enable the selected I2C peripheral */
+	mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_PE);
+
+	hi2c->i2c_state = I2C_STATE_READY;
+
+	hi2c->lock = 0;
+
+	return 0;
+}
+
+/*
+ * @brief  Get I2C setup information from the device tree and set pinctrl
+ *         configuration.
+ * @param  fdt: Pointer to the device tree
+ * @param  node: I2C node offset
+ * @param  init: Ref to the initialization configuration structure
+ * @retval 0 if OK, negative value else
+ */
+int stm32_i2c_get_setup_from_fdt(void *fdt, int node,
+				 struct stm32_i2c_init_s *init)
+{
+	const fdt32_t *cuint;
+
+	cuint = fdt_getprop(fdt, node, "i2c-scl-rising-time-ns", NULL);
+	if (cuint == NULL) {
+		init->rise_time = STM32_I2C_RISE_TIME_DEFAULT;
+	} else {
+		init->rise_time = fdt32_to_cpu(*cuint);
+	}
+
+	cuint = fdt_getprop(fdt, node, "i2c-scl-falling-time-ns", NULL);
+	if (cuint == NULL) {
+		init->fall_time = STM32_I2C_FALL_TIME_DEFAULT;
+	} else {
+		init->fall_time = fdt32_to_cpu(*cuint);
+	}
+
+	cuint = fdt_getprop(fdt, node, "clock-frequency", NULL);
+	if (cuint == NULL) {
+		init->speed_mode = STM32_I2C_SPEED_DEFAULT;
+	} else {
+		switch (fdt32_to_cpu(*cuint)) {
+		case STANDARD_RATE:
+			init->speed_mode = I2C_SPEED_STANDARD;
+			break;
+		case FAST_RATE:
+			init->speed_mode = I2C_SPEED_FAST;
+			break;
+		case FAST_PLUS_RATE:
+			init->speed_mode = I2C_SPEED_FAST_PLUS;
+			break;
+		default:
+			init->speed_mode = STM32_I2C_SPEED_DEFAULT;
+			break;
+		}
+	}
+
+	return dt_set_pinctrl_config(node);
+}
 
 /*
  * @brief  Initialize the I2C device.
  * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
  *               the configuration information for the specified I2C.
+ * @param  init_data: Initialization configuration structure
  * @retval 0 if OK, negative value else
  */
-int stm32_i2c_init(struct i2c_handle_s *hi2c)
+int stm32_i2c_init(struct i2c_handle_s *hi2c,
+		   struct stm32_i2c_init_s *init_data)
 {
+	int rc = 0;
+	uint32_t timing = I2C_TIMING;
+
 	if (hi2c == NULL) {
 		return -ENOENT;
 	}
@@ -80,34 +158,38 @@
 
 	hi2c->i2c_state = I2C_STATE_BUSY;
 
+	stm32mp_clk_enable(hi2c->clock);
+
 	/* Disable the selected I2C peripheral */
 	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_PE);
 
 	/* Configure I2Cx: Frequency range */
 	mmio_write_32(hi2c->i2c_base_addr + I2C_TIMINGR,
-		      hi2c->i2c_init.timing & TIMING_CLEAR_MASK);
+		      timing & TIMINGR_CLEAR_MASK);
 
 	/* Disable Own Address1 before set the Own Address1 configuration */
 	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_OAR1, I2C_OAR1_OA1EN);
 
 	/* Configure I2Cx: Own Address1 and ack own address1 mode */
-	if (hi2c->i2c_init.addressing_mode == I2C_ADDRESSINGMODE_7BIT) {
+	if (init_data->addressing_mode == I2C_ADDRESSINGMODE_7BIT) {
 		mmio_write_32(hi2c->i2c_base_addr + I2C_OAR1,
-			      I2C_OAR1_OA1EN | hi2c->i2c_init.own_address1);
+			      I2C_OAR1_OA1EN | init_data->own_address1);
 	} else { /* I2C_ADDRESSINGMODE_10BIT */
 		mmio_write_32(hi2c->i2c_base_addr + I2C_OAR1,
 			      I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE |
-			      hi2c->i2c_init.own_address1);
+			      init_data->own_address1);
 	}
 
+	mmio_write_32(hi2c->i2c_base_addr + I2C_CR2, 0);
+
 	/* Configure I2Cx: Addressing Master mode */
-	if (hi2c->i2c_init.addressing_mode == I2C_ADDRESSINGMODE_10BIT) {
-		mmio_write_32(hi2c->i2c_base_addr + I2C_CR2, I2C_CR2_ADD10);
+	if (init_data->addressing_mode == I2C_ADDRESSINGMODE_10BIT) {
+		mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR2, I2C_CR2_ADD10);
 	}
 
 	/*
 	 * Enable the AUTOEND by default, and enable NACK
-	 * (should be disable only during Slave process)
+	 * (should be disabled only during Slave process).
 	 */
 	mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR2,
 			I2C_CR2_AUTOEND | I2C_CR2_NACK);
@@ -117,14 +199,14 @@
 
 	/* Configure I2Cx: Dual mode and Own Address2 */
 	mmio_write_32(hi2c->i2c_base_addr + I2C_OAR2,
-		      hi2c->i2c_init.dual_address_mode |
-		      hi2c->i2c_init.own_address2 |
-		      (hi2c->i2c_init.own_address2_masks << 8));
+		      init_data->dual_address_mode |
+		      init_data->own_address2 |
+		      (init_data->own_address2_masks << 8));
 
 	/* Configure I2Cx: Generalcall and NoStretch mode */
 	mmio_write_32(hi2c->i2c_base_addr + I2C_CR1,
-		      hi2c->i2c_init.general_call_mode |
-		      hi2c->i2c_init.no_stretch_mode);
+		      init_data->general_call_mode |
+		      init_data->no_stretch_mode);
 
 	/* Enable the selected I2C peripheral */
 	mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_PE);
@@ -133,471 +215,23 @@
 	hi2c->i2c_state = I2C_STATE_READY;
 	hi2c->i2c_mode = I2C_MODE_NONE;
 
-	return 0;
-}
-
-/*
- * @brief  Write an amount of data in blocking mode to a specific memory address
- * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
- *               the configuration information for the specified I2C.
- * @param  dev_addr: Target device address
- * @param  mem_addr: Internal memory address
- * @param  mem_add_size: size of internal memory address
- * @param  p_data: Pointer to data buffer
- * @param  size: Amount of data to be sent
- * @param  timeout: timeout duration
- * @retval 0 if OK, negative value else
- */
-int stm32_i2c_mem_write(struct i2c_handle_s *hi2c, uint16_t dev_addr,
-			uint16_t mem_addr, uint16_t mem_add_size,
-			uint8_t *p_data, uint16_t size, uint32_t timeout)
-{
-	uint32_t tickstart;
-
-	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
-		return -EBUSY;
+	rc = i2c_config_analog_filter(hi2c, init_data->analog_filter ?
+						I2C_ANALOGFILTER_ENABLE :
+						I2C_ANALOGFILTER_DISABLE);
+	if (rc != 0) {
+		ERROR("Cannot initialize I2C analog filter (%d)\n", rc);
+		stm32mp_clk_disable(hi2c->clock);
+		return rc;
 	}
 
-	if ((p_data == NULL) || (size == 0U)) {
-		return -EINVAL;
-	}
+	stm32mp_clk_disable(hi2c->clock);
 
-	hi2c->lock = 1;
-
-	tickstart = (uint32_t)read_cntpct_el0();
-
-	if (i2c_wait_flag(hi2c, I2C_FLAG_BUSY, 1, I2C_TIMEOUT_BUSY,
-			  tickstart) != 0) {
-		return -EIO;
-	}
-
-	hi2c->i2c_state     = I2C_STATE_BUSY_TX;
-	hi2c->i2c_mode      = I2C_MODE_MEM;
-	hi2c->i2c_err = I2C_ERROR_NONE;
-
-	hi2c->p_buff  = p_data;
-	hi2c->xfer_count = size;
-
-	/* Send Slave Address and Memory Address */
-	if (i2c_request_memory_write(hi2c, dev_addr, mem_addr, mem_add_size,
-				     timeout, tickstart) != 0) {
-		hi2c->lock = 0;
-		return -EIO;
-	}
-
-	/*
-	 * Set NBYTES to write and reload
-	 * if hi2c->xfer_count > MAX_NBYTE_SIZE
-	 */
-	if (hi2c->xfer_count > MAX_NBYTE_SIZE) {
-		hi2c->xfer_size = MAX_NBYTE_SIZE;
-		i2c_transfer_config(hi2c, dev_addr, hi2c->xfer_size,
-				    I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
-	} else {
-		hi2c->xfer_size = hi2c->xfer_count;
-		i2c_transfer_config(hi2c, dev_addr, hi2c->xfer_size,
-				    I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
-	}
-
-	do {
-		if (i2c_wait_txis(hi2c, timeout, tickstart) != 0) {
-			return -EIO;
-		}
-
-		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR, *hi2c->p_buff);
-		hi2c->p_buff++;
-		hi2c->xfer_count--;
-		hi2c->xfer_size--;
-
-		if ((hi2c->xfer_count != 0U) && (hi2c->xfer_size == 0U)) {
-			/* Wait until TCR flag is set */
-			if (i2c_wait_flag(hi2c, I2C_FLAG_TCR, 0, timeout,
-					  tickstart) != 0) {
-				return -EIO;
-		}
-
-			if (hi2c->xfer_count > MAX_NBYTE_SIZE) {
-				hi2c->xfer_size = MAX_NBYTE_SIZE;
-				i2c_transfer_config(hi2c, dev_addr,
-						    hi2c->xfer_size,
-						    I2C_RELOAD_MODE,
-						    I2C_NO_STARTSTOP);
-			} else {
-				hi2c->xfer_size = hi2c->xfer_count;
-				i2c_transfer_config(hi2c, dev_addr,
-						    hi2c->xfer_size,
-						    I2C_AUTOEND_MODE,
-						    I2C_NO_STARTSTOP);
-			}
-		}
-
-	} while (hi2c->xfer_count > 0U);
-
-	/*
-	 * No need to Check TC flag, with AUTOEND mode the stop
-	 * is automatically generated.
-	 * Wait until STOPF flag is reset.
-	 */
-	if (i2c_wait_stop(hi2c, timeout, tickstart) != 0) {
-		return -EIO;
-	}
-
-	mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_STOPF);
-
-	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR2, I2C_RESET_CR2);
-
-	hi2c->i2c_state = I2C_STATE_READY;
-	hi2c->i2c_mode  = I2C_MODE_NONE;
-
-	hi2c->lock = 0;
-
-	return 0;
-}
-
-/*
- * @brief  Read an amount of data in blocking mode from a specific memory
- *	   address
- * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
- *               the configuration information for the specified I2C.
- * @param  dev_addr: Target device address
- * @param  mem_addr: Internal memory address
- * @param  mem_add_size: size of internal memory address
- * @param  p_data: Pointer to data buffer
- * @param  size: Amount of data to be sent
- * @param  timeout: timeout duration
- * @retval 0 if OK, negative value else
- */
-int stm32_i2c_mem_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
-		       uint16_t mem_addr, uint16_t mem_add_size,
-		       uint8_t *p_data, uint16_t size, uint32_t timeout)
-{
-	uint32_t tickstart;
-
-	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
-		return -EBUSY;
-	}
-
-	if ((p_data == NULL) || (size == 0U)) {
-		return  -EINVAL;
-	}
-
-	hi2c->lock = 1;
-
-	tickstart = (uint32_t)read_cntpct_el0();
-
-	if (i2c_wait_flag(hi2c, I2C_FLAG_BUSY, 1, I2C_TIMEOUT_BUSY,
-			  tickstart) != 0) {
-		return -EIO;
-	}
-
-	hi2c->i2c_state     = I2C_STATE_BUSY_RX;
-	hi2c->i2c_mode      = I2C_MODE_MEM;
-	hi2c->i2c_err = I2C_ERROR_NONE;
-
-	hi2c->p_buff  = p_data;
-	hi2c->xfer_count = size;
-
-	/* Send Slave Address and Memory Address */
-	if (i2c_request_memory_read(hi2c, dev_addr, mem_addr, mem_add_size,
-				    timeout, tickstart) != 0) {
-		hi2c->lock = 0;
-		return -EIO;
-	}
-
-	/*
-	 * Send Slave Address.
-	 * Set NBYTES to write and reload if hi2c->xfer_count > MAX_NBYTE_SIZE
-	 * and generate RESTART.
-	 */
-	if (hi2c->xfer_count > MAX_NBYTE_SIZE) {
-		hi2c->xfer_size = MAX_NBYTE_SIZE;
-		i2c_transfer_config(hi2c, dev_addr, hi2c->xfer_size,
-				    I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
-	} else {
-		hi2c->xfer_size = hi2c->xfer_count;
-		i2c_transfer_config(hi2c, dev_addr, hi2c->xfer_size,
-				    I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
-	}
-
-	do {
-		if (i2c_wait_flag(hi2c, I2C_FLAG_RXNE, 0, timeout,
-				  tickstart) != 0) {
-			return -EIO;
-		}
-
-		*hi2c->p_buff = mmio_read_8(hi2c->i2c_base_addr + I2C_RXDR);
-		hi2c->p_buff++;
-		hi2c->xfer_size--;
-		hi2c->xfer_count--;
-
-		if ((hi2c->xfer_count != 0U) && (hi2c->xfer_size == 0U)) {
-			if (i2c_wait_flag(hi2c, I2C_FLAG_TCR, 0, timeout,
-					  tickstart) != 0) {
-				return -EIO;
-			}
-
-			if (hi2c->xfer_count > MAX_NBYTE_SIZE) {
-				hi2c->xfer_size = MAX_NBYTE_SIZE;
-				i2c_transfer_config(hi2c, dev_addr,
-						    hi2c->xfer_size,
-						    I2C_RELOAD_MODE,
-						    I2C_NO_STARTSTOP);
-			} else {
-				hi2c->xfer_size = hi2c->xfer_count;
-				i2c_transfer_config(hi2c, dev_addr,
-						    hi2c->xfer_size,
-						    I2C_AUTOEND_MODE,
-						    I2C_NO_STARTSTOP);
-			}
-		}
-	} while (hi2c->xfer_count > 0U);
-
-	/*
-	 * No need to Check TC flag, with AUTOEND mode the stop
-	 * is automatically generated
-	 * Wait until STOPF flag is reset
-	 */
-	if (i2c_wait_stop(hi2c, timeout, tickstart) != 0) {
-		return -EIO;
-	}
-
-	mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_STOPF);
-
-	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR2, I2C_RESET_CR2);
-
-	hi2c->i2c_state = I2C_STATE_READY;
-	hi2c->i2c_mode  = I2C_MODE_NONE;
-
-	hi2c->lock = 0;
-
-	return 0;
-}
-
-/*
- * @brief  Checks if target device is ready for communication.
- * @note   This function is used with Memory devices
- * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
- *               the configuration information for the specified I2C.
- * @param  dev_addr: Target device address
- * @param  trials: Number of trials
- * @param  timeout: timeout duration
- * @retval 0 if OK, negative value else
- */
-int stm32_i2c_is_device_ready(struct i2c_handle_s *hi2c,
-			      uint16_t dev_addr, uint32_t trials,
-			      uint32_t timeout)
-{
-	uint32_t i2c_trials = 0U;
-
-	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
-		return -EBUSY;
-	}
-
-	if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) & I2C_FLAG_BUSY) !=
-	    0U) {
-		return -EBUSY;
-	}
-
-	hi2c->lock = 1;
-
-	hi2c->i2c_state = I2C_STATE_BUSY;
-	hi2c->i2c_err = I2C_ERROR_NONE;
-
-	do {
-		uint32_t tickstart;
-
-		/* Generate Start */
-		if (hi2c->i2c_init.addressing_mode == I2C_ADDRESSINGMODE_7BIT) {
-			mmio_write_32(hi2c->i2c_base_addr + I2C_CR2,
-				      (((uint32_t)dev_addr & I2C_CR2_SADD) |
-				       I2C_CR2_START | I2C_CR2_AUTOEND) &
-				       ~I2C_CR2_RD_WRN);
-		} else {
-			mmio_write_32(hi2c->i2c_base_addr + I2C_CR2,
-				      (((uint32_t)dev_addr & I2C_CR2_SADD) |
-				       I2C_CR2_START | I2C_CR2_ADD10) &
-				      ~I2C_CR2_RD_WRN);
-		}
-
-		/*
-		 * No need to Check TC flag, with AUTOEND mode the stop
-		 * is automatically generated
-		 * Wait until STOPF flag is set or a NACK flag is set
-		 */
-		tickstart = (uint32_t)read_cntpct_el0();
-		while (((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
-			 (I2C_FLAG_STOPF | I2C_FLAG_AF)) == 0U) &&
-		       (hi2c->i2c_state != I2C_STATE_TIMEOUT)) {
-			if (timeout != MAX_DELAY) {
-				if ((((uint32_t)read_cntpct_el0() - tickstart) >
-				     timeout) || (timeout == 0U)) {
-					hi2c->i2c_state = I2C_STATE_READY;
-
-					hi2c->i2c_err |=
-						I2C_ERROR_TIMEOUT;
-
-					hi2c->lock = 0;
-
-					return -EIO;
-				}
-			}
-		}
-
-		/* Check if the NACKF flag has not been set */
-		if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
-		     I2C_FLAG_AF) == 0U) {
-			if (i2c_wait_flag(hi2c, I2C_FLAG_STOPF, 0, timeout,
-					  tickstart) != 0) {
-				return -EIO;
-			}
-
-			mmio_write_32(hi2c->i2c_base_addr + I2C_ICR,
-				      I2C_FLAG_STOPF);
-
-			hi2c->i2c_state = I2C_STATE_READY;
-
-			hi2c->lock = 0;
-
-			return 0;
-		}
-
-		if (i2c_wait_flag(hi2c, I2C_FLAG_STOPF, 0, timeout,
-				  tickstart) != 0) {
-			return -EIO;
-		}
-
-		mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_AF);
-
-		mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_STOPF);
-
-		if (i2c_trials == trials) {
-			mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR2,
-					I2C_CR2_STOP);
-
-			if (i2c_wait_flag(hi2c, I2C_FLAG_STOPF, 0, timeout,
-					  tickstart) != 0) {
-				return -EIO;
-			}
-
-			mmio_write_32(hi2c->i2c_base_addr + I2C_ICR,
-				      I2C_FLAG_STOPF);
-		}
-
-		i2c_trials++;
-	} while (i2c_trials < trials);
-
-	hi2c->i2c_state = I2C_STATE_READY;
-
-	hi2c->i2c_err |= I2C_ERROR_TIMEOUT;
-
-	hi2c->lock = 0;
-
-	return -EIO;
-}
-
-/*
- * @brief  Master sends target device address followed by internal memory
- *	   address for write request.
- * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
- *               the configuration information for the specified I2C.
- * @param  dev_addr: Target device address
- * @param  mem_addr: Internal memory address
- * @param  mem_add_size: size of internal memory address
- * @param  timeout: timeout duration
- * @param  tick_start Tick start value
- * @retval 0 if OK, negative value else
- */
-static int i2c_request_memory_write(struct i2c_handle_s *hi2c,
-				    uint16_t dev_addr, uint16_t mem_addr,
-				    uint16_t mem_add_size, uint32_t timeout,
-				    uint32_t tick_start)
-{
-	i2c_transfer_config(hi2c, dev_addr, mem_add_size, I2C_RELOAD_MODE,
-			    I2C_GENERATE_START_WRITE);
-
-	if (i2c_wait_txis(hi2c, timeout, tick_start) != 0) {
-		return -EIO;
-	}
-
-	if (mem_add_size == I2C_MEMADD_SIZE_8BIT) {
-		/* Send Memory Address */
-		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
-			     (uint8_t)(mem_addr & 0x00FFU));
-	} else {
-		/* Send MSB of Memory Address */
-		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
-			     (uint8_t)((mem_addr & 0xFF00U) >> 8));
-
-		/* Wait until TXIS flag is set */
-		if (i2c_wait_txis(hi2c, timeout, tick_start) != 0) {
-			return -EIO;
-		}
-
-		/* Send LSB of Memory Address */
-		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
-			     (uint8_t)(mem_addr & 0x00FFU));
-	}
-
-	if (i2c_wait_flag(hi2c, I2C_FLAG_TCR, 0, timeout, tick_start) !=
-	    0) {
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/*
- * @brief  Master sends target device address followed by internal memory
- *	   address for read request.
- * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
- *               the configuration information for the specified I2C.
- * @param  dev_addr: Target device address
- * @param  mem_addr: Internal memory address
- * @param  mem_add_size: size of internal memory address
- * @param  timeout: timeout duration
- * @param  tick_start Tick start value
- * @retval 0 if OK, negative value else
- */
-static int i2c_request_memory_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
-				   uint16_t mem_addr, uint16_t mem_add_size,
-				   uint32_t timeout, uint32_t tick_start)
-{
-	i2c_transfer_config(hi2c, dev_addr, mem_add_size, I2C_SOFTEND_MODE,
-			    I2C_GENERATE_START_WRITE);
-
-	if (i2c_wait_txis(hi2c, timeout, tick_start) != 0) {
-		return -EIO;
-	}
-
-	if (mem_add_size == I2C_MEMADD_SIZE_8BIT) {
-		/* Send Memory Address */
-		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
-			     (uint8_t)(mem_addr & 0x00FFU));
-	} else {
-		/* Send MSB of Memory Address */
-		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
-			     (uint8_t)((mem_addr & 0xFF00U) >> 8));
-
-		/* Wait until TXIS flag is set */
-		if (i2c_wait_txis(hi2c, timeout, tick_start) != 0) {
-			return -EIO;
-		}
-
-		/* Send LSB of Memory Address */
-		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
-			     (uint8_t)(mem_addr & 0x00FFU));
-	}
-
-	if (i2c_wait_flag(hi2c, I2C_FLAG_TC, 0, timeout, tick_start) != 0) {
-		return -EIO;
-	}
-
-	return 0;
+	return rc;
 }
 
 /*
  * @brief  I2C Tx data register flush process.
- * @param  hi2c: I2C handle.
+ * @param  hi2c: I2C handle
  * @retval None
  */
 static void i2c_flush_txdr(struct i2c_handle_s *hi2c)
@@ -623,104 +257,28 @@
  * @brief  This function handles I2C Communication timeout.
  * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
  *               the configuration information for the specified I2C.
- * @param  flag: Specifies the I2C flag to check.
- * @param  awaited_value: The awaited bit value for the flag (0 or 1).
- * @param  timeout: timeout duration
- * @param  tick_start: Tick start value
+ * @param  flag: Specifies the I2C flag to check
+ * @param  awaited_value: The awaited bit value for the flag (0 or 1)
+ * @param  timeout_ref: Reference to target timeout
  * @retval 0 if OK, negative value else
  */
 static int i2c_wait_flag(struct i2c_handle_s *hi2c, uint32_t flag,
-			 uint8_t awaited_value, uint32_t timeout,
-			 uint32_t tick_start)
+			 uint8_t awaited_value, uint64_t timeout_ref)
 {
-	uint8_t flag_check;
+	for ( ; ; ) {
+		uint32_t isr = mmio_read_32(hi2c->i2c_base_addr + I2C_ISR);
 
-	do {
-		flag_check = ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
-			       flag) == flag) ? 1U : 0U;
-
-		if (timeout != MAX_DELAY) {
-			if ((((uint32_t)read_cntpct_el0() - tick_start) >
-			     timeout) || (timeout == 0U)) {
-				hi2c->i2c_err |= I2C_ERROR_TIMEOUT;
-				hi2c->i2c_state = I2C_STATE_READY;
-				hi2c->i2c_mode = I2C_MODE_NONE;
-
-				hi2c->lock = 0;
-				return -EIO;
-			}
-		}
-	} while (flag_check == awaited_value);
-
-	return 0;
-}
-
-/*
- * @brief  This function handles I2C Communication timeout for specific usage
- *	   of TXIS flag.
- * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
- *               the configuration information for the specified I2C.
- * @param  timeout: timeout duration
- * @param  tick_start: Tick start value
- * @retval 0 if OK, negative value else
- */
-static int i2c_wait_txis(struct i2c_handle_s *hi2c, uint32_t timeout,
-			 uint32_t tick_start)
-{
-	while ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
-		I2C_FLAG_TXIS) == 0U) {
-		if (i2c_ack_failed(hi2c, timeout, tick_start) != 0) {
-			return -EIO;
+		if (!!(isr & flag) != !!awaited_value) {
+			return 0;
 		}
 
-		if (timeout != MAX_DELAY) {
-			if ((((uint32_t)read_cntpct_el0() - tick_start) >
-			     timeout) || (timeout == 0U)) {
-				hi2c->i2c_err |= I2C_ERROR_TIMEOUT;
-				hi2c->i2c_state = I2C_STATE_READY;
-				hi2c->i2c_mode = I2C_MODE_NONE;
-
-				hi2c->lock = 0;
-
-				return -EIO;
-			}
-		}
-	}
-
-	return 0;
-}
-
-/*
- * @brief  This function handles I2C Communication timeout for specific
- *	   usage of STOP flag.
- * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
- *               the configuration information for the specified I2C.
- * @param  timeout: timeout duration
- * @param  tick_start: Tick start value
- * @retval 0 if OK, negative value else
- */
-static int i2c_wait_stop(struct i2c_handle_s *hi2c, uint32_t timeout,
-			 uint32_t tick_start)
-{
-	while ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
-		 I2C_FLAG_STOPF) == 0U) {
-		if (i2c_ack_failed(hi2c, timeout, tick_start) != 0) {
-			return -EIO;
-		}
-
-		if ((((uint32_t)read_cntpct_el0() - tick_start) > timeout) ||
-		    (timeout == 0U)) {
-			hi2c->i2c_err |= I2C_ERROR_TIMEOUT;
-			hi2c->i2c_state = I2C_STATE_READY;
-			hi2c->i2c_mode = I2C_MODE_NONE;
-
+		if (timeout_elapsed(timeout_ref)) {
+			notif_i2c_timeout(hi2c);
 			hi2c->lock = 0;
 
 			return -EIO;
 		}
 	}
-
-	return 0;
 }
 
 /*
@@ -728,12 +286,10 @@
  *	   an I2C Communication.
  * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
  *               the configuration information for the specified I2C.
- * @param  timeout: timeout duration
- * @param  tick_start: Tick start value
+ * @param  timeout_ref: Reference to target timeout
  * @retval 0 if OK, negative value else
  */
-static int i2c_ack_failed(struct i2c_handle_s *hi2c, uint32_t timeout,
-			  uint32_t tick_start)
+static int i2c_ack_failed(struct i2c_handle_s *hi2c, uint64_t timeout_ref)
 {
 	if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) & I2C_FLAG_AF) == 0U) {
 		return 0;
@@ -745,17 +301,11 @@
 	 */
 	while ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
 		I2C_FLAG_STOPF) == 0U) {
-		if (timeout != MAX_DELAY) {
-			if ((((uint32_t)read_cntpct_el0() - tick_start) >
-			     timeout) || (timeout == 0U)) {
-				hi2c->i2c_err |= I2C_ERROR_TIMEOUT;
-				hi2c->i2c_state = I2C_STATE_READY;
-				hi2c->i2c_mode = I2C_MODE_NONE;
+		if (timeout_elapsed(timeout_ref)) {
+			notif_i2c_timeout(hi2c);
+			hi2c->lock = 0;
 
-				hi2c->lock = 0;
-
-				return -EIO;
-			}
+			return -EIO;
 		}
 	}
 
@@ -777,15 +327,69 @@
 }
 
 /*
+ * @brief  This function handles I2C Communication timeout for specific usage
+ *	   of TXIS flag.
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C.
+ * @param  timeout_ref: Reference to target timeout
+ * @retval 0 if OK, negative value else
+ */
+static int i2c_wait_txis(struct i2c_handle_s *hi2c, uint64_t timeout_ref)
+{
+	while ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
+		I2C_FLAG_TXIS) == 0U) {
+		if (i2c_ack_failed(hi2c, timeout_ref) != 0) {
+			return -EIO;
+		}
+
+		if (timeout_elapsed(timeout_ref)) {
+			notif_i2c_timeout(hi2c);
+			hi2c->lock = 0;
+
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * @brief  This function handles I2C Communication timeout for specific
+ *	   usage of STOP flag.
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C.
+ * @param  timeout_ref: Reference to target timeout
+ * @retval 0 if OK, negative value else
+ */
+static int i2c_wait_stop(struct i2c_handle_s *hi2c, uint64_t timeout_ref)
+{
+	while ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
+		 I2C_FLAG_STOPF) == 0U) {
+		if (i2c_ack_failed(hi2c, timeout_ref) != 0) {
+			return -EIO;
+		}
+
+		if (timeout_elapsed(timeout_ref)) {
+			notif_i2c_timeout(hi2c);
+			hi2c->lock = 0;
+
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/*
  * @brief  Handles I2Cx communication when starting transfer or during transfer
  *	   (TC or TCR flag are set).
- * @param  hi2c: I2C handle.
- * @param  dev_addr: Specifies the slave address to be programmed.
+ * @param  hi2c: I2C handle
+ * @param  dev_addr: Specifies the slave address to be programmed
  * @param  size: Specifies the number of bytes to be programmed.
  *   This parameter must be a value between 0 and 255.
  * @param  i2c_mode: New state of the I2C START condition generation.
  *   This parameter can be one of the following values:
- *     @arg @ref I2C_RELOAD_MODE: Enable Reload mode .
+ *     @arg @ref I2C_RELOAD_MODE: Enable Reload mode.
  *     @arg @ref I2C_AUTOEND_MODE: Enable Automatic end mode.
  *     @arg @ref I2C_SOFTEND_MODE: Enable Software end mode.
  * @param  request: New state of the I2C START condition generation.
@@ -815,38 +419,563 @@
 }
 
 /*
- * @brief  Configure I2C Analog noise filter.
+ * @brief  Master sends target device address followed by internal memory
+ *	   address for write request.
  * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
- *               the configuration information for the specified I2Cx peripheral
- * @param  analog_filter: New state of the Analog filter.
+ *               the configuration information for the specified I2C.
+ * @param  dev_addr: Target device address
+ * @param  mem_addr: Internal memory address
+ * @param  mem_add_size: Size of internal memory address
+ * @param  timeout_ref: Reference to target timeout
  * @retval 0 if OK, negative value else
  */
-int stm32_i2c_config_analog_filter(struct i2c_handle_s *hi2c,
-				   uint32_t analog_filter)
+static int i2c_request_memory_write(struct i2c_handle_s *hi2c,
+				    uint16_t dev_addr, uint16_t mem_addr,
+				    uint16_t mem_add_size, uint64_t timeout_ref)
 {
+	i2c_transfer_config(hi2c, dev_addr, mem_add_size, I2C_RELOAD_MODE,
+			    I2C_GENERATE_START_WRITE);
+
+	if (i2c_wait_txis(hi2c, timeout_ref) != 0) {
+		return -EIO;
+	}
+
+	if (mem_add_size == I2C_MEMADD_SIZE_8BIT) {
+		/* Send Memory Address */
+		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
+			     (uint8_t)(mem_addr & 0x00FFU));
+	} else {
+		/* Send MSB of Memory Address */
+		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
+			     (uint8_t)((mem_addr & 0xFF00U) >> 8));
+
+		if (i2c_wait_txis(hi2c, timeout_ref) != 0) {
+			return -EIO;
+		}
+
+		/* Send LSB of Memory Address */
+		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
+			     (uint8_t)(mem_addr & 0x00FFU));
+	}
+
+	if (i2c_wait_flag(hi2c, I2C_FLAG_TCR, 0, timeout_ref) != 0) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * @brief  Master sends target device address followed by internal memory
+ *	   address for read request.
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C.
+ * @param  dev_addr: Target device address
+ * @param  mem_addr: Internal memory address
+ * @param  mem_add_size: Size of internal memory address
+ * @param  timeout_ref: Reference to target timeout
+ * @retval 0 if OK, negative value else
+ */
+static int i2c_request_memory_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
+				   uint16_t mem_addr, uint16_t mem_add_size,
+				   uint64_t timeout_ref)
+{
+	i2c_transfer_config(hi2c, dev_addr, mem_add_size, I2C_SOFTEND_MODE,
+			    I2C_GENERATE_START_WRITE);
+
+	if (i2c_wait_txis(hi2c, timeout_ref) != 0) {
+		return -EIO;
+	}
+
+	if (mem_add_size == I2C_MEMADD_SIZE_8BIT) {
+		/* Send Memory Address */
+		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
+			     (uint8_t)(mem_addr & 0x00FFU));
+	} else {
+		/* Send MSB of Memory Address */
+		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
+			     (uint8_t)((mem_addr & 0xFF00U) >> 8));
+
+		if (i2c_wait_txis(hi2c, timeout_ref) != 0) {
+			return -EIO;
+		}
+
+		/* Send LSB of Memory Address */
+		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
+			     (uint8_t)(mem_addr & 0x00FFU));
+	}
+
+	if (i2c_wait_flag(hi2c, I2C_FLAG_TC, 0, timeout_ref) != 0) {
+		return -EIO;
+	}
+
+	return 0;
+}
+/*
+ * @brief  Generic function to write an amount of data in blocking mode
+ *         (for Memory Mode and Master Mode)
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C.
+ * @param  dev_addr: Target device address
+ * @param  mem_addr: Internal memory address (if Memory Mode)
+ * @param  mem_add_size: Size of internal memory address (if Memory Mode)
+ * @param  p_data: Pointer to data buffer
+ * @param  size: Amount of data to be sent
+ * @param  timeout_ms: Timeout duration in milliseconds
+ * @param  mode: Communication mode
+ * @retval 0 if OK, negative value else
+ */
+static int i2c_write(struct i2c_handle_s *hi2c, uint16_t dev_addr,
+		     uint16_t mem_addr, uint16_t mem_add_size,
+		     uint8_t *p_data, uint16_t size, uint32_t timeout_ms,
+		     enum i2c_mode_e mode)
+{
+	uint64_t timeout_ref;
+	int rc = -EIO;
+	uint8_t *p_buff = p_data;
+	uint32_t xfer_size;
+	uint32_t xfer_count = size;
+
+	if ((mode != I2C_MODE_MASTER) && (mode != I2C_MODE_MEM)) {
+		return -1;
+	}
+
 	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
 		return -EBUSY;
 	}
 
+	if ((p_data == NULL) || (size == 0U)) {
+		return -EINVAL;
+	}
+
+	stm32mp_clk_enable(hi2c->clock);
+
 	hi2c->lock = 1;
 
-	hi2c->i2c_state = I2C_STATE_BUSY;
+	timeout_ref = timeout_init_us(I2C_TIMEOUT_BUSY_MS * 1000);
+	if (i2c_wait_flag(hi2c, I2C_FLAG_BUSY, 1, timeout_ref) != 0) {
+		goto bail;
+	}
 
-	/* Disable the selected I2C peripheral */
-	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_PE);
+	hi2c->i2c_state = I2C_STATE_BUSY_TX;
+	hi2c->i2c_mode = mode;
+	hi2c->i2c_err = I2C_ERROR_NONE;
 
-	/* Reset I2Cx ANOFF bit */
-	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_ANFOFF);
+	timeout_ref = timeout_init_us(timeout_ms * 1000);
 
-	/* Set analog filter bit*/
-	mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR1, analog_filter);
+	if (mode == I2C_MODE_MEM) {
+		/* In Memory Mode, Send Slave Address and Memory Address */
+		if (i2c_request_memory_write(hi2c, dev_addr, mem_addr,
+					     mem_add_size, timeout_ref) != 0) {
+			goto bail;
+		}
 
-	/* Enable the selected I2C peripheral */
-	mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_PE);
+		if (xfer_count > MAX_NBYTE_SIZE) {
+			xfer_size = MAX_NBYTE_SIZE;
+			i2c_transfer_config(hi2c, dev_addr, xfer_size,
+					    I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+		} else {
+			xfer_size = xfer_count;
+			i2c_transfer_config(hi2c, dev_addr, xfer_size,
+					    I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+		}
+	} else {
+		/* In Master Mode, Send Slave Address */
+		if (xfer_count > MAX_NBYTE_SIZE) {
+			xfer_size = MAX_NBYTE_SIZE;
+			i2c_transfer_config(hi2c, dev_addr, xfer_size,
+					    I2C_RELOAD_MODE,
+					    I2C_GENERATE_START_WRITE);
+		} else {
+			xfer_size = xfer_count;
+			i2c_transfer_config(hi2c, dev_addr, xfer_size,
+					    I2C_AUTOEND_MODE,
+					    I2C_GENERATE_START_WRITE);
+		}
+	}
+
+	do {
+		if (i2c_wait_txis(hi2c, timeout_ref) != 0) {
+			goto bail;
+		}
+
+		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR, *p_buff);
+		p_buff++;
+		xfer_count--;
+		xfer_size--;
+
+		if ((xfer_count != 0U) && (xfer_size == 0U)) {
+			/* Wait until TCR flag is set */
+			if (i2c_wait_flag(hi2c, I2C_FLAG_TCR, 0,
+					  timeout_ref) != 0) {
+				goto bail;
+			}
+
+			if (xfer_count > MAX_NBYTE_SIZE) {
+				xfer_size = MAX_NBYTE_SIZE;
+				i2c_transfer_config(hi2c, dev_addr,
+						    xfer_size,
+						    I2C_RELOAD_MODE,
+						    I2C_NO_STARTSTOP);
+			} else {
+				xfer_size = xfer_count;
+				i2c_transfer_config(hi2c, dev_addr,
+						    xfer_size,
+						    I2C_AUTOEND_MODE,
+						    I2C_NO_STARTSTOP);
+			}
+		}
+
+	} while (xfer_count > 0U);
+
+	/*
+	 * No need to Check TC flag, with AUTOEND mode the stop
+	 * is automatically generated.
+	 * Wait until STOPF flag is reset.
+	 */
+	if (i2c_wait_stop(hi2c, timeout_ref) != 0) {
+		goto bail;
+	}
+
+	mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_STOPF);
+
+	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR2, I2C_RESET_CR2);
 
 	hi2c->i2c_state = I2C_STATE_READY;
+	hi2c->i2c_mode  = I2C_MODE_NONE;
 
+	rc = 0;
+
+bail:
 	hi2c->lock = 0;
+	stm32mp_clk_disable(hi2c->clock);
 
-	return 0;
+	return rc;
 }
+
+/*
+ * @brief  Write an amount of data in blocking mode to a specific memory
+ *         address.
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C.
+ * @param  dev_addr: Target device address
+ * @param  mem_addr: Internal memory address
+ * @param  mem_add_size: Size of internal memory address
+ * @param  p_data: Pointer to data buffer
+ * @param  size: Amount of data to be sent
+ * @param  timeout_ms: Timeout duration in milliseconds
+ * @retval 0 if OK, negative value else
+ */
+int stm32_i2c_mem_write(struct i2c_handle_s *hi2c, uint16_t dev_addr,
+			uint16_t mem_addr, uint16_t mem_add_size,
+			uint8_t *p_data, uint16_t size, uint32_t timeout_ms)
+{
+	return i2c_write(hi2c, dev_addr, mem_addr, mem_add_size,
+			 p_data, size, timeout_ms, I2C_MODE_MEM);
+}
+
+/*
+ * @brief  Transmits in master mode an amount of data in blocking mode.
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C.
+ * @param  dev_addr: Target device address
+ * @param  p_data: Pointer to data buffer
+ * @param  size: Amount of data to be sent
+ * @param  timeout_ms: Timeout duration in milliseconds
+ * @retval 0 if OK, negative value else
+ */
+int stm32_i2c_master_transmit(struct i2c_handle_s *hi2c, uint16_t dev_addr,
+			      uint8_t *p_data, uint16_t size,
+			      uint32_t timeout_ms)
+{
+	return i2c_write(hi2c, dev_addr, 0, 0,
+			 p_data, size, timeout_ms, I2C_MODE_MASTER);
+}
+
+/*
+ * @brief  Generic function to read an amount of data in blocking mode
+ *         (for Memory Mode and Master Mode)
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C.
+ * @param  dev_addr: Target device address
+ * @param  mem_addr: Internal memory address (if Memory Mode)
+ * @param  mem_add_size: Size of internal memory address (if Memory Mode)
+ * @param  p_data: Pointer to data buffer
+ * @param  size: Amount of data to be sent
+ * @param  timeout_ms: Timeout duration in milliseconds
+ * @param  mode: Communication mode
+ * @retval 0 if OK, negative value else
+ */
+static int i2c_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
+		    uint16_t mem_addr, uint16_t mem_add_size,
+		    uint8_t *p_data, uint16_t size, uint32_t timeout_ms,
+		    enum i2c_mode_e mode)
+{
+	uint64_t timeout_ref;
+	int rc = -EIO;
+	uint8_t *p_buff = p_data;
+	uint32_t xfer_count = size;
+	uint32_t xfer_size;
+
+	if ((mode != I2C_MODE_MASTER) && (mode != I2C_MODE_MEM)) {
+		return -1;
+	}
+
+	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
+		return -EBUSY;
+	}
+
+	if ((p_data == NULL) || (size == 0U)) {
+		return  -EINVAL;
+	}
+
+	stm32mp_clk_enable(hi2c->clock);
+
+	hi2c->lock = 1;
+
+	timeout_ref = timeout_init_us(I2C_TIMEOUT_BUSY_MS * 1000);
+	if (i2c_wait_flag(hi2c, I2C_FLAG_BUSY, 1, timeout_ref) != 0) {
+		goto bail;
+	}
+
+	hi2c->i2c_state = I2C_STATE_BUSY_RX;
+	hi2c->i2c_mode = mode;
+	hi2c->i2c_err = I2C_ERROR_NONE;
+
+	if (mode == I2C_MODE_MEM) {
+		/* Send Memory Address */
+		if (i2c_request_memory_read(hi2c, dev_addr, mem_addr,
+					    mem_add_size, timeout_ref) != 0) {
+			goto bail;
+		}
+	}
+
+	/*
+	 * Send Slave Address.
+	 * Set NBYTES to write and reload if xfer_count > MAX_NBYTE_SIZE
+	 * and generate RESTART.
+	 */
+	if (xfer_count > MAX_NBYTE_SIZE) {
+		xfer_size = MAX_NBYTE_SIZE;
+		i2c_transfer_config(hi2c, dev_addr, xfer_size,
+				    I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+	} else {
+		xfer_size = xfer_count;
+		i2c_transfer_config(hi2c, dev_addr, xfer_size,
+				    I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+	}
+
+	do {
+		if (i2c_wait_flag(hi2c, I2C_FLAG_RXNE, 0, timeout_ref) != 0) {
+			goto bail;
+		}
+
+		*p_buff = mmio_read_8(hi2c->i2c_base_addr + I2C_RXDR);
+		p_buff++;
+		xfer_size--;
+		xfer_count--;
+
+		if ((xfer_count != 0U) && (xfer_size == 0U)) {
+			if (i2c_wait_flag(hi2c, I2C_FLAG_TCR, 0,
+					  timeout_ref) != 0) {
+				goto bail;
+			}
+
+			if (xfer_count > MAX_NBYTE_SIZE) {
+				xfer_size = MAX_NBYTE_SIZE;
+				i2c_transfer_config(hi2c, dev_addr,
+						    xfer_size,
+						    I2C_RELOAD_MODE,
+						    I2C_NO_STARTSTOP);
+			} else {
+				xfer_size = xfer_count;
+				i2c_transfer_config(hi2c, dev_addr,
+						    xfer_size,
+						    I2C_AUTOEND_MODE,
+						    I2C_NO_STARTSTOP);
+			}
+		}
+	} while (xfer_count > 0U);
+
+	/*
+	 * No need to Check TC flag, with AUTOEND mode the stop
+	 * is automatically generated.
+	 * Wait until STOPF flag is reset.
+	 */
+	if (i2c_wait_stop(hi2c, timeout_ref) != 0) {
+		goto bail;
+	}
+
+	mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_STOPF);
+
+	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR2, I2C_RESET_CR2);
+
+	hi2c->i2c_state = I2C_STATE_READY;
+	hi2c->i2c_mode = I2C_MODE_NONE;
+
+	rc = 0;
+
+bail:
+	hi2c->lock = 0;
+	stm32mp_clk_disable(hi2c->clock);
+
+	return rc;
+}
+
+/*
+ * @brief  Read an amount of data in blocking mode from a specific memory
+ *	   address.
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C.
+ * @param  dev_addr: Target device address
+ * @param  mem_addr: Internal memory address
+ * @param  mem_add_size: Size of internal memory address
+ * @param  p_data: Pointer to data buffer
+ * @param  size: Amount of data to be sent
+ * @param  timeout_ms: Timeout duration in milliseconds
+ * @retval 0 if OK, negative value else
+ */
+int stm32_i2c_mem_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
+		       uint16_t mem_addr, uint16_t mem_add_size,
+		       uint8_t *p_data, uint16_t size, uint32_t timeout_ms)
+{
+	return i2c_read(hi2c, dev_addr, mem_addr, mem_add_size,
+			p_data, size, timeout_ms, I2C_MODE_MEM);
+}
+
+/*
+ * @brief  Receives in master mode an amount of data in blocking mode.
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C.
+ * @param  dev_addr: Target device address
+ * @param  p_data: Pointer to data buffer
+ * @param  size: Amount of data to be sent
+ * @param  timeout_ms: Timeout duration in milliseconds
+ * @retval 0 if OK, negative value else
+ */
+int stm32_i2c_master_receive(struct i2c_handle_s *hi2c, uint16_t dev_addr,
+			     uint8_t *p_data, uint16_t size,
+			     uint32_t timeout_ms)
+{
+	return i2c_read(hi2c, dev_addr, 0, 0,
+			p_data, size, timeout_ms, I2C_MODE_MASTER);
+}
+
+/*
+ * @brief  Checks if target device is ready for communication.
+ * @note   This function is used with Memory devices
+ * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
+ *               the configuration information for the specified I2C.
+ * @param  dev_addr: Target device address
+ * @param  trials: Number of trials
+ * @param  timeout_ms: Timeout duration in milliseconds
+ * @retval True if device is ready, false else
+ */
+bool stm32_i2c_is_device_ready(struct i2c_handle_s *hi2c,
+			       uint16_t dev_addr, uint32_t trials,
+			       uint32_t timeout_ms)
+{
+	uint32_t i2c_trials = 0U;
+	bool rc = false;
+
+	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
+		return rc;
+	}
+
+	stm32mp_clk_enable(hi2c->clock);
+
+	hi2c->lock = 1;
+	hi2c->i2c_mode = I2C_MODE_NONE;
+
+	if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) & I2C_FLAG_BUSY) !=
+	    0U) {
+		goto bail;
+	}
+
+	hi2c->i2c_state = I2C_STATE_BUSY;
+	hi2c->i2c_err = I2C_ERROR_NONE;
+
+	do {
+		uint64_t timeout_ref;
+
+		/* Generate Start */
+		if ((mmio_read_32(hi2c->i2c_base_addr + I2C_OAR1) &
+		     I2C_OAR1_OA1MODE) == 0) {
+			mmio_write_32(hi2c->i2c_base_addr + I2C_CR2,
+				      (((uint32_t)dev_addr & I2C_CR2_SADD) |
+				       I2C_CR2_START | I2C_CR2_AUTOEND) &
+				      ~I2C_CR2_RD_WRN);
+		} else {
+			mmio_write_32(hi2c->i2c_base_addr + I2C_CR2,
+				      (((uint32_t)dev_addr & I2C_CR2_SADD) |
+				       I2C_CR2_START | I2C_CR2_ADD10) &
+				      ~I2C_CR2_RD_WRN);
+		}
+
+		/*
+		 * No need to Check TC flag, with AUTOEND mode the stop
+		 * is automatically generated.
+		 * Wait until STOPF flag is set or a NACK flag is set.
+		 */
+		timeout_ref = timeout_init_us(timeout_ms * 1000);
+		do {
+			if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
+			     (I2C_FLAG_STOPF | I2C_FLAG_AF)) != 0U) {
+				break;
+			}
+
+			if (timeout_elapsed(timeout_ref)) {
+				notif_i2c_timeout(hi2c);
+				goto bail;
+			}
+		} while (true);
+
+		if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
+		     I2C_FLAG_AF) == 0U) {
+			if (i2c_wait_flag(hi2c, I2C_FLAG_STOPF, 0,
+					  timeout_ref) != 0) {
+				goto bail;
+			}
+
+			mmio_write_32(hi2c->i2c_base_addr + I2C_ICR,
+				      I2C_FLAG_STOPF);
+
+			hi2c->i2c_state = I2C_STATE_READY;
+
+			rc = true;
+			goto bail;
+		}
+
+		if (i2c_wait_flag(hi2c, I2C_FLAG_STOPF, 0, timeout_ref) != 0) {
+			goto bail;
+		}
+
+		mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_AF);
+
+		mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_STOPF);
+
+		if (i2c_trials == trials) {
+			mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR2,
+					I2C_CR2_STOP);
+
+			if (i2c_wait_flag(hi2c, I2C_FLAG_STOPF, 0,
+					  timeout_ref) != 0) {
+				goto bail;
+			}
+
+			mmio_write_32(hi2c->i2c_base_addr + I2C_ICR,
+				      I2C_FLAG_STOPF);
+		}
+
+		i2c_trials++;
+	} while (i2c_trials < trials);
+
+	notif_i2c_timeout(hi2c);
+
+bail:
+	hi2c->lock = 0;
+	stm32mp_clk_disable(hi2c->clock);
+
+	return rc;
+}
+