plat/arm: Add platform support for Morello
This patch adds support for Morello platform.
It is an initial port which includes only BL31 support
as the System Control Processor (SCP) is expected to take
the role of primary bootloader.
Change-Id: I1ecbe5a14a2d487b2ecea3c1ca227f08473ed2dd
Co-authored-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
diff --git a/plat/arm/board/morello/platform.mk b/plat/arm/board/morello/platform.mk
new file mode 100644
index 0000000..f62cd67
--- /dev/null
+++ b/plat/arm/board/morello/platform.mk
@@ -0,0 +1,66 @@
+#
+# Copyright (c) 2020, Arm Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+MORELLO_BASE := plat/arm/board/morello
+
+INTERCONNECT_SOURCES := ${MORELLO_BASE}/morello_interconnect.c
+
+PLAT_INCLUDES := -I${MORELLO_BASE}/include
+
+MORELLO_CPU_SOURCES := lib/cpus/aarch64/rainier.S
+
+MORELLO_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
+ drivers/arm/gic/v3/gicv3_main.c \
+ drivers/arm/gic/v3/gicv3_helpers.c \
+ plat/common/plat_gicv3.c \
+ plat/arm/common/arm_gicv3.c \
+ drivers/arm/gic/v3/gic600.c
+
+PLAT_BL_COMMON_SOURCES := ${MORELLO_BASE}/morello_plat.c \
+ ${MORELLO_BASE}/aarch64/morello_helper.S
+
+BL31_SOURCES := ${MORELLO_CPU_SOURCES} \
+ ${INTERCONNECT_SOURCES} \
+ ${MORELLO_GIC_SOURCES} \
+ ${MORELLO_BASE}/morello_bl31_setup.c \
+ ${MORELLO_BASE}/morello_topology.c \
+ ${MORELLO_BASE}/morello_security.c \
+ drivers/arm/css/sds/sds.c
+
+FDT_SOURCES += fdts/morello-fvp.dts
+
+# TF-A not required to load the SCP Images
+override CSS_LOAD_SCP_IMAGES := 0
+
+# BL1/BL2 Image not a part of the capsule Image for morello
+override NEED_BL1 := no
+override NEED_BL2 := no
+override NEED_BL2U := no
+
+#TF-A for morello starts from BL31
+override RESET_TO_BL31 := 1
+
+# 32 bit mode not supported
+override CTX_INCLUDE_AARCH32_REGS := 0
+
+override ARM_PLAT_MT := 1
+
+# Select SCMI/SDS drivers instead of SCPI/BOM driver for communicating with the
+# SCP during power management operations and for SCP RAM Firmware transfer.
+CSS_USE_SCMI_SDS_DRIVER := 1
+
+# System coherency is managed in hardware
+HW_ASSISTED_COHERENCY := 1
+
+# When building for systems with hardware-assisted coherency, there's no need to
+# use USE_COHERENT_MEM. Require that USE_COHERENT_MEM must be set to 0 too.
+USE_COHERENT_MEM := 0
+
+include plat/arm/common/arm_common.mk
+include plat/arm/css/common/css_common.mk
+include plat/arm/board/common/board_common.mk
+
+override ERRATA_N1_1542419 := 1