blob: 10eff011b29b8bcd536bc1272aa62b786beaa1a9 [file] [log] [blame]
/*
* Copyright (c) 2017-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef PLATFORM_DEF_H
#define PLATFORM_DEF_H
#include <arch.h>
#include <lib/utils_def.h>
#include "../hikey960_def.h"
/* Special value used to verify platform parameters from BL2 to BL3-1 */
#define HIKEY960_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
/*
* Generic platform constants
*/
/* Size of cacheable stacks */
#define PLATFORM_STACK_SIZE 0x1000
#define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n"
#define PLATFORM_CACHE_LINE_SIZE 64
#define PLATFORM_CLUSTER_COUNT U(2)
#define PLATFORM_CORE_COUNT_PER_CLUSTER U(4)
#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER_COUNT * \
PLATFORM_CORE_COUNT_PER_CLUSTER)
#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL2
#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CORE_COUNT + \
PLATFORM_CLUSTER_COUNT + 1)
#define PLAT_MAX_RET_STATE U(1)
#define PLAT_MAX_OFF_STATE U(2)
#define MAX_IO_DEVICES 3
#define MAX_IO_HANDLES 4
/* UFS RPMB and UFS User Data */
#define MAX_IO_BLOCK_DEVICES U(2)
/*
* Platform memory map related constants
*/
/*
* BL1 specific defines.
*/
#define BL1_RO_BASE (0x1AC00000)
#define BL1_RO_LIMIT (BL1_RO_BASE + 0x20000)
#define BL1_RW_BASE (BL1_RO_LIMIT) /* 1AC2_0000 */
#define BL1_RW_SIZE (0x00188000)
#define BL1_RW_LIMIT (0x1B000000)
/*
* BL2 specific defines.
*/
#define BL2_BASE (0x1AC00000)
#define BL2_LIMIT (BL2_BASE + 0x58000) /* 1AC5_8000 */
/*
* BL31 specific defines.
*/
#define BL31_BASE (BL2_LIMIT) /* 1AC5_8000 */
#define BL31_LIMIT (BL31_BASE + 0x40000) /* 1AC9_8000 */
/*
* BL3-2 specific defines.
*/
/*
* The TSP currently executes from TZC secured area of DRAM.
*/
#define BL32_DRAM_BASE DDR_SEC_BASE
#define BL32_DRAM_LIMIT (DDR_SEC_BASE+DDR_SEC_SIZE)
#ifdef SPD_opteed
/* Load pageable part of OP-TEE at end of allocated DRAM space for BL32 */
#define HIKEY960_OPTEE_PAGEABLE_LOAD_BASE (BL32_DRAM_LIMIT - HIKEY960_OPTEE_PAGEABLE_LOAD_SIZE) /* 0x3FC0_0000 */
#define HIKEY960_OPTEE_PAGEABLE_LOAD_SIZE 0x400000 /* 4MB */
#endif
#if (HIKEY960_TSP_RAM_LOCATION_ID == HIKEY960_DRAM_ID)
#define TSP_SEC_MEM_BASE BL32_DRAM_BASE
#define TSP_SEC_MEM_SIZE (BL32_DRAM_LIMIT - BL32_DRAM_BASE)
#define BL32_BASE BL32_DRAM_BASE
#define BL32_LIMIT BL32_DRAM_LIMIT
#elif (HIKEY960_TSP_RAM_LOCATION_ID == HIKEY960_SRAM_ID)
#error "SRAM storage of TSP payload is currently unsupported"
#else
#error "Currently unsupported HIKEY960_TSP_LOCATION_ID value"
#endif
/* BL32 is mandatory in AArch32 */
#ifdef __aarch64__
#ifdef SPD_none
#undef BL32_BASE
#endif /* SPD_none */
#endif
#define NS_BL1U_BASE (BL31_LIMIT) /* 1AC9_8000 */
#define NS_BL1U_SIZE (0x00100000)
#define NS_BL1U_LIMIT (NS_BL1U_BASE + NS_BL1U_SIZE)
#define HIKEY960_NS_IMAGE_OFFSET (0x1AC28000) /* offset in l-loader */
#define HIKEY960_NS_TMP_OFFSET (0x1AE00000)
#define SCP_BL2_BASE (0x89C80000)
#define SCP_BL2_SIZE (0x00040000)
/*
* Platform specific page table and MMU setup constants
*/
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 36)
#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 36)
#if defined(IMAGE_BL1) || defined(IMAGE_BL32)
#define MAX_XLAT_TABLES 3
#endif
#if defined(IMAGE_BL2)
#define MAX_XLAT_TABLES 5
#endif
#if defined(IMAGE_BL31)
#if defined(SPMC_AT_EL3)
#define MAX_XLAT_TABLES 17
#else
#define MAX_XLAT_TABLES 5
#endif
#endif
#define MAX_MMAP_REGIONS 16
/*
* Declarations and constants to access the mailboxes safely. Each mailbox is
* aligned on the biggest cache line size in the platform. This is known only
* to the platform as it might have a combination of integrated and external
* caches. Such alignment ensures that two maiboxes do not sit on the same cache
* line at any cache level. They could belong to different cpus/clusters &
* get written while being protected by different locks causing corruption of
* a valid mailbox address.
*/
#define CACHE_WRITEBACK_SHIFT 6
#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
#endif /* PLATFORM_DEF_H */