gxbb: Initial port of Amlogic Meson S905 (GXBB)
The Amlogic Meson S905 is a SoC with a quad core Arm Cortex-A53 running
at 1.5Ghz. It also contains a Cortex-M3 used as SCP.
This port is a minimal implementation of BL31 capable of booting
mainline U-Boot and Linux:
- Partial SCPI support.
- Basic PSCI support (CPU_ON, SYSTEM_RESET, SYSTEM_OFF).
- GICv2 driver set up.
- Basic SIP services (read efuse data, enable/disable JTAG).
This port has been tested in an ODROID-C2.
Change-Id: Ia4bc82d7aca42a69d6b118b947279f82b3f6c6da
Tested-by: Amit Singh Tomar <amittomer25@gmail.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
diff --git a/plat/meson/gxbb/gxbb_def.h b/plat/meson/gxbb/gxbb_def.h
new file mode 100644
index 0000000..0c73ac0
--- /dev/null
+++ b/plat/meson/gxbb/gxbb_def.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef GXBB_DEF_H
+#define GXBB_DEF_H
+
+#include <utils_def.h>
+
+/*******************************************************************************
+ * System oscillator
+ ******************************************************************************/
+#define GXBB_OSC24M_CLK_IN_HZ ULL(24000000) /* 24 MHz */
+
+/*******************************************************************************
+ * Memory regions
+ ******************************************************************************/
+#define GXBB_NSDRAM0_BASE UL(0x01000000)
+#define GXBB_NSDRAM0_SIZE UL(0x0F000000)
+
+#define GXBB_NSDRAM1_BASE UL(0x10000000)
+#define GXBB_NSDRAM1_SIZE UL(0x00100000)
+
+#define BL31_BASE UL(0x10100000)
+#define BL31_SIZE UL(0x000C0000)
+#define BL31_LIMIT (BL31_BASE + BL31_SIZE)
+
+/* Shared memory used for SMC services */
+#define GXBB_SHARE_MEM_INPUT_BASE UL(0x100FE000)
+#define GXBB_SHARE_MEM_OUTPUT_BASE UL(0x100FF000)
+
+#define GXBB_SEC_DEVICE0_BASE UL(0xC0000000)
+#define GXBB_SEC_DEVICE0_SIZE UL(0x09000000)
+
+#define GXBB_SEC_DEVICE1_BASE UL(0xD0040000)
+#define GXBB_SEC_DEVICE1_SIZE UL(0x00008000)
+
+#define GXBB_TZRAM_BASE UL(0xD9000000)
+#define GXBB_TZRAM_SIZE UL(0x00014000)
+/* Top 0xC000 bytes (up to 0xD9020000) used by BL2 */
+
+/* Mailboxes */
+#define GXBB_MHU_SECURE_SCP_TO_AP_PAYLOAD UL(0xD9013800)
+#define GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD UL(0xD9013A00)
+#define GXBB_PSCI_MAILBOX_BASE UL(0xD9013F00)
+
+#define GXBB_TZROM_BASE UL(0xD9040000)
+#define GXBB_TZROM_SIZE UL(0x00010000)
+
+#define GXBB_SEC_DEVICE2_BASE UL(0xDA000000)
+#define GXBB_SEC_DEVICE2_SIZE UL(0x00200000)
+
+#define GXBB_SEC_DEVICE3_BASE UL(0xDA800000)
+#define GXBB_SEC_DEVICE3_SIZE UL(0x00200000)
+
+/*******************************************************************************
+ * GIC-400 and interrupt handling related constants
+ ******************************************************************************/
+#define GXBB_GICD_BASE UL(0xC4301000)
+#define GXBB_GICC_BASE UL(0xC4302000)
+
+#define IRQ_SEC_PHY_TIMER 29
+
+#define IRQ_SEC_SGI_0 8
+#define IRQ_SEC_SGI_1 9
+#define IRQ_SEC_SGI_2 10
+#define IRQ_SEC_SGI_3 11
+#define IRQ_SEC_SGI_4 12
+#define IRQ_SEC_SGI_5 13
+#define IRQ_SEC_SGI_6 14
+#define IRQ_SEC_SGI_7 15
+
+/*******************************************************************************
+ * UART definitions
+ ******************************************************************************/
+#define GXBB_UART0_AO_BASE UL(0xC81004C0)
+#define GXBB_UART0_AO_CLK_IN_HZ GXBB_OSC24M_CLK_IN_HZ
+#define GXBB_UART_BAUDRATE U(115200)
+
+/*******************************************************************************
+ * Memory-mapped I/O Registers
+ ******************************************************************************/
+#define GXBB_AO_TIMESTAMP_CNTL UL(0xC81000B4)
+
+#define GXBB_SYS_CPU_CFG7 UL(0xC8834664)
+
+#define GXBB_AO_RTI_STATUS_REG3 UL(0xDA10001C)
+
+#define GXBB_HIU_MAILBOX_SET_0 UL(0xDA83C404)
+#define GXBB_HIU_MAILBOX_STAT_0 UL(0xDA83C408)
+#define GXBB_HIU_MAILBOX_CLR_0 UL(0xDA83C40C)
+#define GXBB_HIU_MAILBOX_SET_3 UL(0xDA83C428)
+#define GXBB_HIU_MAILBOX_STAT_3 UL(0xDA83C42C)
+#define GXBB_HIU_MAILBOX_CLR_3 UL(0xDA83C430)
+
+/*******************************************************************************
+ * System Monitor Call IDs and arguments
+ ******************************************************************************/
+#define GXBB_SM_GET_SHARE_MEM_INPUT_BASE U(0x82000020)
+#define GXBB_SM_GET_SHARE_MEM_OUTPUT_BASE U(0x82000021)
+
+#define GXBB_SM_EFUSE_READ U(0x82000030)
+#define GXBB_SM_EFUSE_USER_MAX U(0x82000033)
+
+#define GXBB_SM_JTAG_ON U(0x82000040)
+#define GXBB_SM_JTAG_OFF U(0x82000041)
+
+#define GXBB_JTAG_STATE_ON U(0)
+#define GXBB_JTAG_STATE_OFF U(1)
+
+#define GXBB_JTAG_M3_AO U(0)
+#define GXBB_JTAG_M3_EE U(1)
+#define GXBB_JTAG_A53_AO U(2)
+#define GXBB_JTAG_A53_EE U(3)
+
+#endif /* GXBB_DEF_H */