diff --git a/drivers/arm/ccn/ccn_private.h b/drivers/arm/ccn/ccn_private.h
new file mode 100644
index 0000000..e92e870
--- /dev/null
+++ b/drivers/arm/ccn/ccn_private.h
@@ -0,0 +1,239 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __CCN_PRIVATE_H__
+#define __CCN_PRIVATE_H__
+
+/*
+ * A CCN implementation can have a maximum of 64 Request nodes with node IDs
+ * from 0-63. These IDs are split across the three types of Request nodes
+ * i.e. RN-F, RN-D and RN-I.
+ */
+#define MAX_RN_NODES		64
+
+/* Enum used to loop through the 3 types of Request nodes */
+typedef enum rn_types {
+	RN_TYPE_RNF = 0,
+	RN_TYPE_RNI,
+	RN_TYPE_RND,
+	NUM_RN_TYPES
+} rn_types_t;
+
+/* Macro to convert a region id to its base address */
+#define region_id_to_base(id)	((id) << 16)
+
+/*
+ * Macro to calculate the number of master interfaces resident on a RN-I/RN-D.
+ * Value of first two bits of the RN-I/D node type + 1 == Maximum number of
+ * ACE-Lite or ACE-Lite+DVM interfaces supported on this node. E.g.
+ *
+ * 0x14 : RN-I with 1 ACE-Lite interface
+ * 0x15 : RN-I with 2 ACE-Lite interfaces
+ * 0x16 : RN-I with 3 ACE-Lite interfaces
+ */
+#define rn_type_id_to_master_cnt(id)	(((id) & 0x3) + 1)
+
+/*
+ * Constants used to identify a region in the programmer's view. These are
+ * common for all regions.
+ */
+#define REGION_ID_LIMIT		256
+#define REGION_ID_OFFSET	0xFF00
+
+#define REGION_NODE_ID_SHIFT	8
+#define REGION_NODE_ID_MASK	0x7f
+#define get_node_id(id_reg)	(((id_reg) >> REGION_NODE_ID_SHIFT) \
+				 & REGION_NODE_ID_MASK)
+
+#define REGION_NODE_TYPE_SHIFT	0
+#define REGION_NODE_TYPE_MASK	0x1f
+#define get_node_type(id_reg)	(((id_reg) >> REGION_NODE_TYPE_SHIFT) \
+				 & REGION_NODE_TYPE_MASK)
+
+/* Common offsets of registers to enter or exit a snoop/dvm domain */
+#define DOMAIN_CTRL_STAT_OFFSET	0x0200
+#define DOMAIN_CTRL_SET_OFFSET	0x0210
+#define DOMAIN_CTRL_CLR_OFFSET	0x0220
+
+/*
+ * Thess macros are used to determine if an operation to add or remove a Request
+ * node from the snoop/dvm domain has completed. 'rn_id_map' is a bit map of
+ * nodes. It was used to program the SET or CLEAR control register. The type of
+ * register is specified by 'op_reg_offset'. 'status_reg' is the bit map of
+ * nodes currently present in the snoop/dvm domain. 'rn_id_map' and 'status_reg'
+ * are logically ANDed and the result it stored back in the 'status_reg'. There
+ * are two outcomes of this operation:
+ *
+ * 1. If the DOMAIN_CTRL_SET_OFFSET register was programmed, then the set bits in
+ *    'rn_id_map' should appear in 'status_reg' when the operation completes. So
+ *    after the AND operation, at some point of time 'status_reg' should equal
+ *    'rn_id_map'.
+ *
+ * 2. If the DOMAIN_CTRL_CLR_OFFSET register was programmed, then the set bits in
+ *    'rn_id_map' should disappear in 'status_reg' when the operation
+ *    completes. So after the AND operation, at some point of time 'status_reg'
+ *    should equal 0.
+ */
+#define WAIT_FOR_DOMAIN_CTRL_OP_COMPLETION(region_id, stat_reg_offset,		\
+					   op_reg_offset, rn_id_map)		\
+	{									\
+		uint64_t status_reg;						\
+		do {								\
+			status_reg = ccn_reg_read((ccn_plat_desc->periphbase),	\
+						  (region_id),			\
+						  (stat_reg_offset));		\
+			status_reg &= (rn_id_map);				\
+		} while ((op_reg_offset) == DOMAIN_CTRL_SET_OFFSET ?		\
+			 (rn_id_map) != status_reg : status_reg);		\
+	}
+
+/*
+ * Region ID of the Miscellaneous Node is always 0 as its located at the base of
+ * the programmer's view.
+ */
+#define MN_REGION_ID		0
+
+#define MN_REGION_ID_START	0
+#define DEBUG_REGION_ID_START	1
+#define HNI_REGION_ID_START	8
+#define SBSX_REGION_ID_START	16
+#define HNF_REGION_ID_START	32
+#define XP_REGION_ID_START	64
+#define RNI_REGION_ID_START	128
+
+/* Selected register offsets from the base of a HNF region */
+#define HNF_CFG_CTRL_OFFSET	0x0000
+#define HNF_SAM_CTRL_OFFSET	0x0008
+#define HNF_PSTATE_REQ_OFFSET	0x0010
+#define HNF_PSTATE_STAT_OFFSET	0x0018
+#define HNF_SDC_STAT_OFFSET	DOMAIN_CTRL_STAT_OFFSET
+#define HNF_SDC_SET_OFFSET	DOMAIN_CTRL_SET_OFFSET
+#define HNF_SDC_CLR_OFFSET	DOMAIN_CTRL_CLR_OFFSET
+#define HNF_AUX_CTRL_OFFSET	0x0500
+
+/* Selected register offsets from the base of a MN region */
+#define MN_SAR_OFFSET		0x0000
+#define MN_RNF_NODEID_OFFSET	0x0180
+#define MN_RNI_NODEID_OFFSET	0x0190
+#define MN_RND_NODEID_OFFSET	0x01A0
+#define MN_HNF_NODEID_OFFSET	0x01B0
+#define MN_HNI_NODEID_OFFSET	0x01C0
+#define MN_SN_NODEID_OFFSET	0x01D0
+#define MN_DDC_STAT_OFFSET	DOMAIN_CTRL_STAT_OFFSET
+#define MN_DDC_SET_OFF		DOMAIN_CTRL_SET_OFFSET
+#define MN_DDC_CLR_OFFSET	DOMAIN_CTRL_CLR_OFFSET
+#define MN_ID_OFFSET		REGION_ID_OFFSET
+
+/* HNF System Address Map register bit masks and shifts */
+#define HNF_SAM_CTRL_SN_ID_MASK		0x7f
+#define HNF_SAM_CTRL_SN0_ID_SHIFT	0
+#define HNF_SAM_CTRL_SN1_ID_SHIFT	8
+#define HNF_SAM_CTRL_SN2_ID_SHIFT	16
+
+#define HNF_SAM_CTRL_TAB0_MASK		0x3fUL
+#define HNF_SAM_CTRL_TAB0_SHIFT		48
+#define HNF_SAM_CTRL_TAB1_MASK		0x3fUL
+#define HNF_SAM_CTRL_TAB1_SHIFT		56
+
+#define HNF_SAM_CTRL_3SN_ENB_SHIFT	32
+#define HNF_SAM_CTRL_3SN_ENB_MASK	0x01UL
+
+/*
+ * Macro to create a value suitable for programming into a HNF SAM Control
+ * register for enabling 3SN striping.
+ */
+#define MAKE_HNF_SAM_CTRL_VALUE(sn0, sn1, sn2, tab0, tab1, three_sn_en)     \
+	((((sn0) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN0_ID_SHIFT) | \
+	 (((sn1) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN1_ID_SHIFT) | \
+	 (((sn2) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN2_ID_SHIFT) | \
+	 (((tab0) & HNF_SAM_CTRL_TAB0_MASK) << HNF_SAM_CTRL_TAB0_SHIFT)   | \
+	 (((tab1) & HNF_SAM_CTRL_TAB1_MASK) << HNF_SAM_CTRL_TAB1_SHIFT)   | \
+	 (((three_sn_en) & HNF_SAM_CTRL_3SN_ENB_MASK) << HNF_SAM_CTRL_3SN_ENB_SHIFT))
+
+/* Mask to read the power state value from an HN-F P-state register */
+#define HNF_PSTATE_MASK		0xf
+
+/* Macro to extract the run mode from a p-state value */
+#define PSTATE_TO_RUN_MODE(pstate)	(((pstate) & HNF_PSTATE_MASK) >> 2)
+
+/*
+ * Helper macro that iterates through a given bit map. In each iteration,
+ * it returns the position of the set bit.
+ * It can be used by other utility macros to iterates through all nodes
+ * or masters given a bit map of them.
+ */
+#define FOR_EACH_BIT(bit_pos, bit_map)			\
+	for (bit_pos = __builtin_ctzll(bit_map);	\
+	     bit_map;					\
+	     bit_map &= ~(1UL << bit_pos),		\
+	     bit_pos = __builtin_ctzll(bit_map))
+
+/*
+ * Utility macro that iterates through a bit map of node IDs. In each
+ * iteration, it returns the ID of the next present node in the bit map. Node
+ * ID of a present node == Position of set bit == Number of zeroes trailing the
+ * bit.
+ */
+#define FOR_EACH_PRESENT_NODE_ID(node_id, bit_map)	\
+		FOR_EACH_BIT(node_id, bit_map)
+
+/*
+ * Helper function to return number of set bits in bitmap
+ */
+static inline unsigned int count_set_bits(uint64_t bitmap)
+{
+	unsigned int count = 0;
+
+	for (; bitmap; bitmap &= bitmap - 1)
+		++count;
+
+	return count;
+}
+
+/*
+ * Utility macro that iterates through a bit map of node IDs. In each iteration,
+ * it returns the ID of the next present region corresponding to a node present
+ * in the bit map. Region ID of a present node is in between passed region id
+ * and region id + number of set bits in the bitmap i.e. the number of present
+ * nodes.
+ */
+#define FOR_EACH_PRESENT_REGION_ID(region_id, bit_map)				\
+	for (unsigned long long region_id_limit = count_set_bits(bit_map)	\
+							+ region_id;		\
+	    region_id < region_id_limit;					\
+	    region_id++)
+
+/*
+ * Same macro as FOR_EACH_PRESENT_NODE, but renamed to indicate it traverses
+ * through a bit map of master interfaces.
+ */
+#define FOR_EACH_PRESENT_MASTER_INTERFACE(iface_id, bit_map)	\
+			FOR_EACH_BIT(iface_id, bit_map)
+#endif /* __CCN_PRIVATE_H__ */