#!/usr/bin/env bash
#
# Copyright (c) 2019-2020, Arm Limited. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#

set -e

# Enable job control to have background processes run in their own process
# group. That way, we can kill a background process group in one go.
set -m

ci_root="$(readlink -f "$(dirname "$0")/..")"
source "$ci_root/utils.sh"

artefacts="${artefacts-$workspace/artefacts}"

run_root="$workspace/run"
pid_dir="$workspace/pids"

# This variable avoids graceful termination of the model when
# launched with the parameter 'bp.pl011_uart0.shutdown_on_eot=1'
exit_on_model_param=0

# Model exit parameter string
model_exit_param_string="bp.pl011_uart0.shutdown_on_eot=1"

mkdir -p "$pid_dir"
mkdir -p "$run_root"

kill_and_reap() {
	local gid
	# Kill an active process. Ignore errors
	[ "$1" ] || return 0
	kill -0 "$1" &>/dev/null || return 0

	# Kill the children
	kill -- "-$1"  &>/dev/null || true
	# Kill the group
	{ gid="$(awk '{print $5}' < /proc/$1/stat)";} 2>/dev/null || return
	# For Code Coverage plugin it is needed to propagate
	# the kill signal to the plugin in order to save
	# the trace statistics.
	if [ "${COVERAGE_ON}" == "1" ] || [ -n "$cc_enable" ]; then
		kill -SIGTERM -- "-$gid" &>/dev/null || true
	else
		kill -SIGKILL -- "-$gid" &>/dev/null || true
	fi
	wait "$gid" &>/dev/null || true
}

# Perform clean up and ignore errors
cleanup() {
	local pid
	local sig

	pushd "$pid_dir"
	set +e

	sig=${1:-SIGINT}
	echo "signal received: $sig"

	# Avoid the model termination gracefully when the parameter 'exit_on_model_param'
	# is set and test if exited successfully.
	if [ "$exit_on_model_param" -eq 0 ] || [ "$sig" != "EXIT" ]; then
		# Kill all background processes so far and wait for them
		while read pid; do
			pid="$(cat $pid)"
			echo $pid
			# Forcefully killing model process does not show statistical
			# data (Host CPU time spent running in User and System). Safely
			# kill the model by using SIGINT(^C) that helps in printing
			# statistical data.
			if [ "$pid" == "$model_pid" ] && [ "${COVERAGE_ON}" != "1" ]; then
				model_cid=$(pgrep -P "$model_pid" | xargs)
				# ignore errors
				kill -SIGINT "$model_cid" &>/dev/null || true
				# Allow some time to print data, we can't use wait since the process is
				# a child of the daemonized launch process.
				sleep 5
			fi

			kill_and_reap "$pid"

		done < <(find -name '*.pid')
	fi

	popd
}

# Launch a program. Have its PID saved in a file with given name with .pid
# suffix. When the program exits, create a file with .success suffix, or one
# with .fail if it fails. This function blocks, so the caller must '&' this if
# they want to continue. Call must wait for $pid_dir/$name.pid to be created
# should it want to read it.
launch() {
	local pid

	"$@" &
	pid="$!"
	echo "$pid" > "$pid_dir/${name:?}.pid"
	if wait "$pid"; then
		touch "$pid_dir/$name.success"
	else
		touch "$pid_dir/$name.fail"
	fi
}

# Provide signal as an argument to the trap function.
trap_with_sig() {
	local func

	func="$1" ; shift
	for sig ; do
		trap "$func $sig" "$sig"
	done
}

# Cleanup actions
trap_with_sig cleanup SIGINT SIGHUP SIGTERM EXIT

# Prevent xterm windows from untracked terminals from popping up, especially
# when running locally
not_upon "$test_run" && export DISPLAY=

# Source variables required for run
source "$artefacts/env"

echo
echo "RUNNING: $TEST_CONFIG"
echo

# Accept BIN_MODE from environment, or default to release. If bin_mode is set
# and non-empty (intended to be set from command line), that takes precedence.
pkg_bin_mode="${BIN_MODE:-release}"
bin_mode="${bin_mode:-$pkg_bin_mode}"

# Assume 0 is the primary UART to track
primary_uart=0

# Assume 4 UARTs by default
num_uarts="${num_uarts:-4}"

# Whether to display primary UART progress live on the console
primary_live="${primary_live-$PRIMARY_LIVE}"

# Change directory so that all binaries can be accessed realtive to where they
# lie
run_cwd="$artefacts/$bin_mode"
cd "$run_cwd"

# Source environment for run
if [ -f "run/env" ]; then
	source "run/env"
fi

# Source model environment for run
if [ -f "run/model_env" ]; then
	source "run/model_env"
fi
# Fail if there was no model path set
if [ -z "$model_path" ]; then
	die "No model path set by package!"
fi

# Assume primary UART is used by test payload as well
payload_uart="${payload_uart:-$primary_uart}"

# Launch model with parameters
model_out="$run_root/model_log.txt"
run_sh="$run_root/run.sh"


# Generate run.sh
echo "$model_path \\" > "$run_sh"
sed '/^\s*$/d' < model_params | sort | sed 's/^/\t/;s/$/ \\/' >> "$run_sh"

if [ "${COVERAGE_ON}" == "1" ]; then
	# Adding code coverage plugin
	echo -e "\t-C TRACE.CoverageTrace.trace-file-prefix=$trace_file_prefix \\" >> "$run_sh"
	echo -e "\t--plugin $coverage_trace_plugin \\" >> "$run_sh"
fi
echo -e "\t\"\$@\"" >> "$run_sh"

# Running Reboot/Shutdown tests requires storing the state in non-volatile
# memory(NVM) across reboot. On FVP, NVM is not persistent across reboot, hence
# NVM was saved to a file($NVM_file) when running the model using the run.sh
# shell script.
# If TFTF Reboot/Shutdown tests are enabled, run the fvp model 10 times by
# feeding the file containing NVM state generated from the previous run. Note
# that this file also includes FIP image.

if upon "$run_tftf_reboot_tests" = "1"; then
	tftf_reboot_tests="$run_root/tftf_reboot_tests.sh"

	# Generate tftf_reboot_tests command. It is similar to run_sh.
	# The model would run the reboot and shutdown tests 10 times
	# The uart log file generated by FVP model gets overwritten
	# across reboots. Copy its contents at the end of the test
	echo "cat $uart0_file >> UART0.log" >>"$tftf_reboot_tests"
	echo "cat $uart1_file >> UART1.log" >>"$tftf_reboot_tests"
	cat <<EOF >>"$tftf_reboot_tests"

for i in {1..10}
do
EOF
	cat "$run_sh" >> "$tftf_reboot_tests"
	echo "cat $uart0_file >> UART0.log" >>"$tftf_reboot_tests"
	echo "cat $uart1_file >> UART1.log" >>"$tftf_reboot_tests"
        cat <<EOF >>"$tftf_reboot_tests"
done
EOF
	#Replace fip.bin with file $NVM_file
	sed -i 's/fip.bin/'"$NVM_file"'/' "$tftf_reboot_tests"

	echo "TFTF Reboot/Shutdown Tests Enabled"
	cat "$tftf_reboot_tests" >> "$run_sh"
	rm "$tftf_reboot_tests"
fi

echo "Model command line:"
echo
cat "$run_sh"
chmod +x "$run_sh"
echo

# If it's a test run, skip all the hoops and launch model directly.
if upon "$test_run"; then
	"$run_sh" "$@"
	exit 0
fi

# For an automated run, export a known variable so that we can identify stale
# processes spawned by Trusted Firmware CI by inspecting its environment.
export TRUSTED_FIRMWARE_CI="1"

# Change directory to workspace, as all artifacts paths are relative to
# that, and launch the model. Have model use no buffering on stdout
: >"$model_out"
name="model" launch stdbuf -o0 -e0 "$run_sh" &>"$model_out" &
wait_count=0
while :; do
	if [ -f "$pid_dir/model.pid" ]; then
		break
	fi
	sleep 0.1

	let "wait_count += 1"
	if [ "$wait_count" -gt 100 ]; then
		die "Failed to launch model!"
	fi
done

model_pid="$(cat $pid_dir/model.pid)"
ports_output="$(mktempfile)"
if not_upon "$ports_script"; then
	# Default AWK script to parse model ports
	ports_script="$(mktempfile)"
	cat <<'EOF' >"$ports_script"
/terminal_0/ { ports[0] = $NF }
/terminal_1/ { ports[1] = $NF }
/terminal_2/ { ports[2] = $NF }
/terminal_3/ { ports[3] = $NF }
END {
	for (i = 0; i < num_uarts; i++) {
		if (ports[i] != "")
			print "ports[" i "]=" ports[i]
	}
}
EOF
fi

# Start a watchdog to kill ourselves if we wait too long for the model
# response. Note that this is not the timeout for the whole test, but only for
# the Model to output port numbers.
(
if upon "$jenkins_run"; then
	# Increase this timeout for a cluster run, as it could take longer if
	# the load on the Jenkins server is high.
	model_wait_timeout=120
else
	model_wait_timeout=30
fi
sleep $model_wait_timeout
echo "Model wait timeout!"
kill "$$"
) &
watchdog="$!"

# Parse UARTs ports from early model output. Send a SIGSTOP to the model
# as soon as it outputs all UART ports. This is to prevent the model
# executing before the expect scripts get a chance to connect to the
# UART thereby losing messages.
model_fail=1
while :; do
	awk -v "num_uarts=$num_uarts" -f "$ports_script" "$model_out" \
		> "$ports_output"
	if [ $(wc -l < "$ports_output") -eq "$num_uarts" ]; then
		kill -SIGSTOP "$model_pid"
		model_fail=0
		break
	fi

	# Bail out if model exited meanwhile
	if ! kill -0 "$model_pid" &>/dev/null; then
		echo "Model terminated unexpectedly!"
		break
	fi
done

# Kill the watch dog
kill_and_reap "$watchdog" || true

# Check the model had failed meanwhile, for some reason
if [ "$model_fail" -ne 0 ]; then
	exit 1
fi

if ! [ -x "$(command -v expect)" ]; then
	echo "Error: Expect is not installed."
	exit 1
fi

# The wait loop above exited after model port numbers have been parsed. The
# script's output is ready to be sourced now.
declare -a ports
source "$ports_output"
rm -f "$ports_output"
if [ "${#ports[@]}" -ne "$num_uarts" ]; then
	echo "Failed to get UART port numbers"
	kill_and_reap "$model_pid"
	unset model_pid
fi

# Launch expect scripts for all UARTs
uarts=0
for u in $(seq 0 $(( $num_uarts - 1 )) | tac); do
	script="run/uart$u/expect"
	if [ -f "$script" ]; then
		script="$(cat "$script")"
	else
		script=
	fi

	# Primary UART must have a script
	if [ -z "$script" ]; then
		if [ "$u" = "$primary_uart" ]; then
			die "No primary UART script!"
		else
			echo "Ignoring UART$u (no expect script provided)."
			continue
		fi
	fi

	timeout="run/uart$u/timeout"
	if [ -f "$timeout" ]; then
		timeout="$(cat "$timeout")"
	else
		timeout=
	fi
	timeout="${timeout-1200}"

	full_log="$run_root/uart${u}_full.txt"

	if [ "$u" = "$primary_uart" ]; then
		star="*"
	else
		star=" "
	fi

	uart_name="uart$u"

	# Launch expect after exporting required variables
	(
	if [ -f "run/uart$u/env" ]; then
		set -a
		source "run/uart$u/env"
		set +a
	fi

	if [ "$u" = "$primary_uart" ] && upon "$primary_live"; then
		uart_port="${ports[$u]}" timeout="$timeout" \
			name="$uart_name" launch expect -f "$ci_root/expect/$script" | \
				tee "$full_log"
		echo
	else
		uart_port="${ports[$u]}" timeout="$timeout" \
			name="$uart_name" launch expect -f "$ci_root/expect/$script" \
				&>"$full_log"
	fi

	) &

	let "uarts += 1"
	echo "Tracking UART$u$star with $script; timeout $timeout."
done
# Wait here long 'enough' for expect scripts to connect to ports; then
# let the model proceed
sleep 2
kill -SIGCONT "$model_pid"

# Wait for all children. Note that the wait below is *not* a timed wait.
result=0

set +e
pushd "$pid_dir"
while :; do
	wait -n

	# Exit failure if we've any failures
	if [ "$(wc -l < <(find -name '*.fail'))" -ne 0 ]; then
		result=1
		break
	fi

	# We're done if the payload UART exits success
	if [ -f "$pid_dir/uart$payload_uart.success" ]; then
		break
	fi
done
popd

# Capture whether the model is running with the 'exit model parameter' or not.
exit_on_model_param=$(grep -wc "$model_exit_param_string" "$run_cwd/model_params")

if [ "$result" -eq 0 ]; then
	echo "Test success!"
else
	echo "Test failed!"
fi

if upon "$jenkins_run"; then
	echo
	echo "Artefacts location: $BUILD_URL."
	echo
fi

if upon "$jenkins_run" && upon "$artefacts_receiver" && [ -d "$workspace/run" ]; then
	source "$CI_ROOT/script/send_artefacts.sh" "run"
fi


exit "$result"
# vim: set tw=80 sw=8 noet: