Add tests for too long input; remove an unnecessary length check; code clean up
diff --git a/test/qcbor_decode_tests.c b/test/qcbor_decode_tests.c
index 49cf76a..9649b22 100644
--- a/test/qcbor_decode_tests.c
+++ b/test/qcbor_decode_tests.c
@@ -6384,3 +6384,105 @@
return 0;
}
+
+
+
+
+/*
+ [
+ "aaaaaaaaaa",
+ {}
+ ]
+ */
+static const uint8_t spTooLarge1[] = {
+ 0x9f,
+ 0x6a, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61,
+ 0xa0,
+ 0xff
+};
+
+/*
+ [
+ {
+ 0: "aaaaaaaaaa"
+ }
+ ]
+ */
+static const uint8_t spTooLarge2[] = {
+ 0x9f,
+ 0xa1,
+ 0x00,
+ 0x6a, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61,
+ 0xff
+};
+
+/*
+ h'A1006A61616161616161616161'
+
+ {
+ 0: "aaaaaaaaaa"
+ }
+ */
+static const uint8_t spTooLarge3[] = {
+ 0x4d,
+ 0xa1,
+ 0x00,
+ 0x6a, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61,
+};
+
+int32_t TooLargeInputTest(void)
+{
+ QCBORDecodeContext DC;
+ QCBORError uErr;
+ UsefulBufC String;
+
+ // These tests require a build with QCBOR_MAX_DECODE_INPUT_SIZE set
+ // to 10 There's not really any way to test this error
+ // condition. The error condition is not complex, so setting
+ // QCBOR_MAX_DECODE_INPUT_SIZE gives an OK test.
+
+ // The input CBOR is only too large because the
+ // QCBOR_MAX_DECODE_INPUT_SIZE is 10.
+ //
+ // This test is disabled for the normal test runs because of the
+ // special build requirement.
+
+
+ // Tests the start of a map being too large
+ QCBORDecode_Init(&DC, UsefulBuf_FROM_BYTE_ARRAY_LITERAL(spTooLarge1), QCBOR_DECODE_MODE_NORMAL);
+ QCBORDecode_EnterArray(&DC);
+ QCBORDecode_GetTextString(&DC, &String);
+ uErr = QCBORDecode_GetError(&DC);
+ if(uErr != QCBOR_SUCCESS) {
+ return 1;
+ }
+ QCBORDecode_EnterMap(&DC);
+ uErr = QCBORDecode_GetError(&DC);
+ if(uErr != QCBOR_ERR_INPUT_TOO_LARGE) {
+ return 2;
+ }
+
+ // Tests the end of a map being too large
+ QCBORDecode_Init(&DC, UsefulBuf_FROM_BYTE_ARRAY_LITERAL(spTooLarge2), QCBOR_DECODE_MODE_NORMAL);
+ QCBORDecode_EnterArray(&DC);
+ QCBORDecode_EnterMap(&DC);
+ uErr = QCBORDecode_GetError(&DC);
+ if(uErr != QCBOR_SUCCESS) {
+ return 3;
+ }
+ QCBORDecode_ExitMap(&DC);
+ uErr = QCBORDecode_GetError(&DC);
+ if(uErr != QCBOR_ERR_INPUT_TOO_LARGE) {
+ return 4;
+ }
+
+ // Tests the entire input CBOR being too large when processing bstr wrapping
+ QCBORDecode_Init(&DC, UsefulBuf_FROM_BYTE_ARRAY_LITERAL(spTooLarge3), QCBOR_DECODE_MODE_NORMAL);
+ QCBORDecode_EnterBstrWrapped(&DC, QCBOR_TAG_REQUIREMENT_NOT_A_TAG, NULL);
+ uErr = QCBORDecode_GetError(&DC);
+ if(uErr != QCBOR_ERR_INPUT_TOO_LARGE) {
+ return 5;
+ }
+
+ return 0;
+}