diff --git a/src/UsefulBuf.c b/src/UsefulBuf.c
index b36e5d0..f90790b 100644
--- a/src/UsefulBuf.c
+++ b/src/UsefulBuf.c
@@ -1,33 +1,36 @@
-/*==============================================================================
- Copyright (c) 2016-2018, The Linux Foundation.
- Copyright (c) 2018-2022, Laurence Lundblade.
+/* ==========================================================================
+ * Copyright (c) 2016-2018, The Linux Foundation.
+ * Copyright (c) 2018-2024, Laurence Lundblade.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of The Linux Foundation nor the names of its
+ *       contributors, nor the name "Laurence Lundblade" may be used to
+ *       endorse or promote products derived from this software without
+ *       specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ========================================================================= */
 
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above
-      copyright notice, this list of conditions and the following
-      disclaimer in the documentation and/or other materials provided
-      with the distribution.
-    * Neither the name of The Linux Foundation nor the names of its
-      contributors, nor the name "Laurence Lundblade" may be used to
-      endorse or promote products derived from this software without
-      specific prior written permission.
 
-THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- =============================================================================*/
 
 /*=============================================================================
  FILE:  UsefulBuf.c
@@ -41,9 +44,10 @@
 
  when        who          what, where, why
  --------    ----         ---------------------------------------------------
+ 21/05/2024  llundblade   Comment formatting and some code tidiness.
  19/12/2022  llundblade   Don't pass NULL to memmove when adding empty data.
  4/11/2022   llundblade   Add GetOutPlace and Advance to UsefulOutBuf
- 3/6/2021     mcr/llundblade  Fix warnings related to --Wcast-qual
+ 3/6/2021    mcr/llundblade  Fix warnings related to --Wcast-qual
  01/28/2020  llundblade   Refine integer signedness to quiet static analysis.
  01/08/2020  llundblade   Documentation corrections & improved code formatting.
  11/08/2019  llundblade   Re check pointer math and update comments
@@ -61,18 +65,20 @@
 
 #include "UsefulBuf.h"
 
-// used to catch use of uninitialized or corrupted UsefulOutBuf
+/* used to catch use of uninitialized or corrupted UsefulOutBuf */
 #define USEFUL_OUT_BUF_MAGIC  (0x0B0F)
 
 
 /*
- Public function -- see UsefulBuf.h
+ * Public function -- see UsefulBuf.h
  */
 UsefulBufC UsefulBuf_CopyOffset(UsefulBuf Dest, size_t uOffset, const UsefulBufC Src)
 {
-   // Do this with subtraction so it doesn't give erroneous
-   // result if uOffset + Src.len overflows
-   if(uOffset > Dest.len || Src.len > Dest.len - uOffset) { // uOffset + Src.len > Dest.len
+   /* Do this with subtraction so it doesn't give an erroneous
+    * result if uOffset + Src.len overflows. Right side is equivalent to
+    * uOffset + Src.len > Dest.len
+    */
+   if(uOffset > Dest.len || Src.len > Dest.len - uOffset) {
       return NULLUsefulBufC;
    }
 
@@ -83,24 +89,25 @@
 
 
 /*
-   Public function -- see UsefulBuf.h
+ * Public function -- see UsefulBuf.h
  */
 int UsefulBuf_Compare(const UsefulBufC UB1, const UsefulBufC UB2)
 {
-   // use the comparisons rather than subtracting lengths to
-   // return an int instead of a size_t
+   /* Use comparisons rather than subtracting lengths to
+    * return an int instead of a size_t
+    */
    if(UB1.len < UB2.len) {
       return -1;
    } else if (UB1.len > UB2.len) {
       return 1;
-   } // else UB1.len == UB2.len
+   } /* else UB1.len == UB2.len */
 
    return memcmp(UB1.ptr, UB2.ptr, UB1.len);
 }
 
 
 /*
- Public function -- see UsefulBuf.h
+ * Public function -- see UsefulBuf.h
  */
 size_t UsefulBuf_IsValue(const UsefulBufC UB, uint8_t uValue)
 {
@@ -113,7 +120,7 @@
    for(const uint8_t *p = UB.ptr; p < pEnd; p++) {
       if(*p != uValue) {
          /* Byte didn't match */
-         /* Cast from signed  to unsigned . Safe because the loop increments.*/
+         /* Cast from signed to unsigned. Safe because the loop increments.*/
          return (size_t)(p - (const uint8_t *)UB.ptr);
       }
    }
@@ -124,7 +131,7 @@
 
 
 /*
- Public function -- see UsefulBuf.h
+ * Public function -- see UsefulBuf.h
  */
 size_t UsefulBuf_FindBytes(UsefulBufC BytesToSearch, UsefulBufC BytesToFind)
 {
@@ -133,7 +140,11 @@
    }
 
    for(size_t uPos = 0; uPos <= BytesToSearch.len - BytesToFind.len; uPos++) {
-      if(!UsefulBuf_Compare((UsefulBufC){((const uint8_t *)BytesToSearch.ptr) + uPos, BytesToFind.len}, BytesToFind)) {
+      UsefulBufC SearchNext;
+
+      SearchNext.ptr = ((const uint8_t *)BytesToSearch.ptr) + uPos;
+      SearchNext.len = BytesToFind.len;
+      if(!UsefulBuf_Compare(SearchNext, BytesToFind)) {
          return uPos;
       }
    }
@@ -143,9 +154,9 @@
 
 
 /*
- Public function -- see UsefulBuf.h
-
- Code Reviewers: THIS FUNCTION DOES POINTER MATH
+ * Public function -- see UsefulBuf.h
+ *
+ * Code Reviewers: THIS FUNCTION DOES POINTER MATH
  */
 void UsefulOutBuf_Init(UsefulOutBuf *pMe, UsefulBuf Storage)
 {
@@ -154,17 +165,18 @@
     pMe->UB     = Storage;
 
 #if 0
-   // This check is off by default.
-
-   // The following check fails on ThreadX
-
-    // Sanity check on the pointer and size to be sure we are not
-    // passed a buffer that goes off the end of the address space.
-    // Given this test, we know that all unsigned lengths less than
-    // me->size are valid and won't wrap in any pointer additions
-    // based off of pStorage in the rest of this code.
+   /* This check is off by default.
+    *
+    * The following check fails on ThreadX
+    *
+    * Sanity check on the pointer and size to be sure we are not
+    * passed a buffer that goes off the end of the address space.
+    * Given this test, we know that all unsigned lengths less than
+    * me->size are valid and won't wrap in any pointer additions
+    * based off of pStorage in the rest of this code.
+    */
     const uintptr_t ptrM = UINTPTR_MAX - Storage.len;
-    if(Storage.ptr && (uintptr_t)Storage.ptr > ptrM) // Check #0
+    if(Storage.ptr && (uintptr_t)Storage.ptr > ptrM) /* Check #0 */
         me->err = 1;
 #endif
 }
@@ -172,101 +184,107 @@
 
 
 /*
- Public function -- see UsefulBuf.h
-
- The core of UsefulOutBuf -- put some bytes in the buffer without writing off
-                             the end of it.
-
- Code Reviewers: THIS FUNCTION DOES POINTER MATH
-
- This function inserts the source buffer, NewData, into the destination
- buffer, me->UB.ptr.
-
- Destination is represented as:
-   me->UB.ptr -- start of the buffer
-   me->UB.len -- size of the buffer UB.ptr
-   me->data_len -- length of value data in UB
-
- Source is data:
-   NewData.ptr -- start of source buffer
-   NewData.len -- length of source buffer
-
- Insertion point:
-   uInsertionPos.
-
- Steps:
-
- 0. Corruption checks on UsefulOutBuf
-
- 1. Figure out if the new data will fit or not
-
- 2. Is insertion position in the range of valid data?
-
- 3. If insertion point is not at the end, slide data to the right of the
-    insertion point to the right
-
- 4. Put the new data in at the insertion position.
-
+ * Public function -- see UsefulBuf.h
+ *
+ * The core of UsefulOutBuf -- put some bytes in the buffer without writing off
+ *                             the end of it.
+ *
+ * Code Reviewers: THIS FUNCTION DOES POINTER MATH
+ *
+ * This function inserts the source buffer, NewData, into the destination
+ * buffer, me->UB.ptr.
+ *
+ * Destination is represented as:
+ *   me->UB.ptr -- start of the buffer
+ *   me->UB.len -- size of the buffer UB.ptr
+ *   me->data_len -- length of value data in UB
+ *
+ * Source is data:
+ *   NewData.ptr -- start of source buffer
+ *   NewData.len -- length of source buffer
+ *
+ * Insertion point:
+ *   uInsertionPos.
+ *
+ * Steps:
+ *
+ * 0. Corruption checks on UsefulOutBuf
+ *
+ * 1. Figure out if the new data will fit or not
+ *
+ * 2. Is insertion position in the range of valid data?
+ *
+ * 3. If insertion point is not at the end, slide data to the right of the
+ *    insertion point to the right
+ *
+ * 4. Put the new data in at the insertion position.
+ *
  */
 void UsefulOutBuf_InsertUsefulBuf(UsefulOutBuf *pMe, UsefulBufC NewData, size_t uInsertionPos)
 {
    if(pMe->err) {
-      // Already in error state.
+      /* Already in error state. */
       return;
    }
 
-   /* 0. Sanity check the UsefulOutBuf structure */
-   // A "counter measure". If magic number is not the right number it
-   // probably means me was not initialized or it was corrupted. Attackers
-   // can defeat this, but it is a hurdle and does good with very
-   // little code.
+   /* 0. Sanity check the UsefulOutBuf structure
+    * A "counter measure". If magic number is not the right number it
+    * probably means pMe was not initialized or it was corrupted. Attackers
+    * can defeat this, but it is a hurdle and does good with very
+    * little code.
+    */
    if(pMe->magic != USEFUL_OUT_BUF_MAGIC) {
       pMe->err = 1;
-      return;  // Magic number is wrong due to uninitalization or corrption
+      return;  /* Magic number is wrong due to uninitalization or corrption */
    }
 
-   // Make sure valid data is less than buffer size. This would only occur
-   // if there was corruption of me, but it is also part of the checks to
-   // be sure there is no pointer arithmatic under/overflow.
-   if(pMe->data_len > pMe->UB.len) {  // Check #1
+   /* Make sure valid data is less than buffer size. This would only occur
+    * if there was corruption of me, but it is also part of the checks to
+    * be sure there is no pointer arithmatic under/overflow.
+    */
+   if(pMe->data_len > pMe->UB.len) {  /* Check #1 */
       pMe->err = 1;
-      // Offset of valid data is off the end of the UsefulOutBuf due to
-      // uninitialization or corruption
+      /* Offset of valid data is off the end of the UsefulOutBuf due to
+       * uninitialization or corruption
+       */
       return;
    }
 
-   /* 1. Will it fit? */
-   // WillItFit() is the same as: NewData.len <= (me->UB.len - me->data_len)
-   // Check #1 makes sure subtraction in RoomLeft will not wrap around
-   if(! UsefulOutBuf_WillItFit(pMe, NewData.len)) { // Check #2
-      // The new data will not fit into the the buffer.
+   /* 1. Will it fit?
+    * WillItFit() is the same as: NewData.len <= (me->UB.len - me->data_len)
+    * Check #1 makes sure subtraction in RoomLeft will not wrap around
+    */
+   if(! UsefulOutBuf_WillItFit(pMe, NewData.len)) { /* Check #2 */
+      /* The new data will not fit into the the buffer. */
       pMe->err = 1;
       return;
    }
 
-   /* 2. Check the Insertion Position */
-   // This, with Check #1, also confirms that uInsertionPos <= me->data_len and
-   // that uInsertionPos + pMe->UB.ptr will not wrap around the end of the
-   // address space.
-   if(uInsertionPos > pMe->data_len) { // Check #3
-      // Off the end of the valid data in the buffer.
+   /* 2. Check the Insertion Position
+    * This, with Check #1, also confirms that uInsertionPos <= me->data_len and
+    * that uInsertionPos + pMe->UB.ptr will not wrap around the end of the
+    * address space.
+    */
+   if(uInsertionPos > pMe->data_len) { /* Check #3 */
+      /* Off the end of the valid data in the buffer. */
       pMe->err = 1;
       return;
    }
 
    /* 3. Slide existing data to the right */
    if (!UsefulOutBuf_IsBufferNULL(pMe)) {
-      uint8_t *pSourceOfMove       = ((uint8_t *)pMe->UB.ptr) + uInsertionPos; // PtrMath #1
-      size_t   uNumBytesToMove     = pMe->data_len - uInsertionPos; // PtrMath #2
-      uint8_t *pDestinationOfMove  = pSourceOfMove + NewData.len; // PtrMath #3
+      uint8_t *pSourceOfMove      = ((uint8_t *)pMe->UB.ptr) + uInsertionPos; /* PtrMath #1 */
+      size_t   uNumBytesToMove    = pMe->data_len - uInsertionPos; /* PtrMath #2 */
+      uint8_t *pDestinationOfMove = pSourceOfMove + NewData.len; /* PtrMath #3*/
 
-      // To know memmove won't go off end of destination, see PtrMath #4
-      // Use memove because it handles overlapping buffers
+      /* To know memmove won't go off end of destination, see PtrMath #4.
+       * Use memove because it handles overlapping buffers
+       */
       memmove(pDestinationOfMove, pSourceOfMove, uNumBytesToMove);
 
       /* 4. Put the new data in */
       uint8_t *pInsertionPoint = pSourceOfMove;
-      // To know memmove won't go off end of destination, see PtrMath #5
+      /* To know memmove won't go off end of destination, see PtrMath #5 */
       if(NewData.ptr != NULL) {
          memmove(pInsertionPoint, NewData.ptr, NewData.len);
       }
@@ -277,30 +295,30 @@
 
 
 /*
- Rationale that describes why the above pointer math is safe
-
- PtrMath #1 will never wrap around over because
-    Check #0 in UsefulOutBuf_Init makes sure me->UB.ptr + me->UB.len doesn't wrap
-    Check #1 makes sure me->data_len is less than me->UB.len
-    Check #3 makes sure uInsertionPos is less than me->data_len
-
- PtrMath #2 will never wrap around under because
-    Check #3 makes sure uInsertionPos is less than me->data_len
-
- PtrMath #3 will never wrap around over because
-    PtrMath #1 is checked resulting in pSourceOfMove being between me->UB.ptr and me->UB.ptr + me->data_len
-    Check #2 that NewData.len will fit in the unused space left in me->UB
-
- PtrMath #4 will never wrap under because
-    Calculation for extent or memmove is uRoomInDestination  = me->UB.len - (uInsertionPos + NewData.len)
-    Check #3 makes sure uInsertionPos is less than me->data_len
-    Check #3 allows Check #2 to be refactored as NewData.Len > (me->size - uInsertionPos)
-    This algebraically rearranges to me->size > uInsertionPos + NewData.len
-
- PtrMath #5 will never wrap under because
-    Calculation for extent of memove is uRoomInDestination = me->UB.len - uInsertionPos;
-    Check #1 makes sure me->data_len is less than me->size
-    Check #3 makes sure uInsertionPos is less than me->data_len
+ * Rationale that describes why the above pointer math is safe
+ *
+ * PtrMath #1 will never wrap around over because
+ *   Check #0 in UsefulOutBuf_Init that me->UB.ptr + me->UB.len doesn't wrap
+ *   Check #1 makes sure me->data_len is less than me->UB.len
+ *   Check #3 makes sure uInsertionPos is less than me->data_len
+ *
+ * PtrMath #2 will never wrap around under because
+ *   Check #3 makes sure uInsertionPos is less than me->data_len
+ *
+ * PtrMath #3 will never wrap around over because
+ *   PtrMath #1 is checked resulting in pSourceOfMove being between me->UB.ptr and me->UB.ptr + me->data_len
+ *   Check #2 that NewData.len will fit in the unused space left in me->UB
+ *
+ * PtrMath #4 will never wrap under because
+ *   Calculation for extent or memmove is uRoomInDestination  = me->UB.len - (uInsertionPos + NewData.len)
+ *   Check #3 makes sure uInsertionPos is less than me->data_len
+ *   Check #3 allows Check #2 to be refactored as NewData.Len > (me->size - uInsertionPos)
+ *   This algebraically rearranges to me->size > uInsertionPos + NewData.len
+ *
+ * PtrMath #5 will never wrap under because
+ *   Calculation for extent of memove is uRoomInDestination = me->UB.len - uInsertionPos;
+ *   Check #1 makes sure me->data_len is less than me->size
+ *   Check #3 makes sure uInsertionPos is less than me->data_len
  */
 
 
@@ -338,7 +356,7 @@
     * checks to be sure there is no pointer arithmatic
     * under/overflow.
     */
-   if(pMe->data_len > pMe->UB.len) {  // Check #1
+   if(pMe->data_len > pMe->UB.len) {  /* Check #1 */
       pMe->err = 1;
       /* Offset of valid data is off the end of the UsefulOutBuf due
        * to uninitialization or corruption.
@@ -363,7 +381,7 @@
 
 
 /*
- Public function -- see UsefulBuf.h
+ * Public function -- see UsefulBuf.h
  */
 UsefulBufC UsefulOutBuf_OutUBuf(UsefulOutBuf *pMe)
 {
@@ -381,9 +399,9 @@
 
 
 /*
- Public function -- see UsefulBuf.h
-
- Copy out the data accumulated in to the output buffer.
+ * Public function -- see UsefulBuf.h
+ *
+ * Copy out the data accumulated in to the output buffer.
  */
 UsefulBufC UsefulOutBuf_CopyOut(UsefulOutBuf *pMe, UsefulBuf pDest)
 {
@@ -398,29 +416,28 @@
 
 
 /*
- Public function -- see UsefulBuf.h
-
- The core of UsefulInputBuf -- consume bytes without going off end of buffer.
-
- Code Reviewers: THIS FUNCTION DOES POINTER MATH
+ * Public function -- see UsefulBuf.h
+ *
+ * The core of UsefulInputBuf -- consume bytes without going off end of buffer.
+ *
+ * Code Reviewers: THIS FUNCTION DOES POINTER MATH
  */
 const void * UsefulInputBuf_GetBytes(UsefulInputBuf *pMe, size_t uAmount)
 {
-   // Already in error state. Do nothing.
+   /* Already in error state. Do nothing. */
    if(pMe->err) {
       return NULL;
    }
 
    if(!UsefulInputBuf_BytesAvailable(pMe, uAmount)) {
-      // Number of bytes asked for at current position are more than available
+      /* Number of bytes asked for is more than available */
       pMe->err = 1;
       return NULL;
    }
 
-   // This is going to succeed
+   /* This is going to succeed */
    const void * const result = ((const uint8_t *)pMe->UB.ptr) + pMe->cursor;
-   // Will not overflow because of check using UsefulInputBuf_BytesAvailable()
+   /* Won't overflow because of check using UsefulInputBuf_BytesAvailable() */
    pMe->cursor += uAmount;
    return result;
 }
-