diff --git a/include/mbedtls/config.h b/include/mbedtls/config.h
index 8d7d631..8a892d7 100644
--- a/include/mbedtls/config.h
+++ b/include/mbedtls/config.h
@@ -1960,7 +1960,7 @@
  * environment:
  * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
  *
- * Module:  library/net.c
+ * Module:  library/net_sockets.c
  *
  * This module provides networking routines.
  */
diff --git a/include/mbedtls/net.h b/include/mbedtls/net.h
index 8c6534c..774559b 100644
--- a/include/mbedtls/net.h
+++ b/include/mbedtls/net.h
@@ -1,9 +1,9 @@
 /**
  * \file net.h
  *
- * \brief Network communication functions
+ * \brief Deprecated header file that includes mbedtls/net_sockets.h
  *
- *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
  *  SPDX-License-Identifier: Apache-2.0
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may
@@ -19,207 +19,13 @@
  *  limitations under the License.
  *
  *  This file is part of mbed TLS (https://tls.mbed.org)
+ *
+ * \deprecated Superseded by mbedtls/net_sockets.h
  */
-#ifndef MBEDTLS_NET_H
-#define MBEDTLS_NET_H
 
-#if !defined(MBEDTLS_CONFIG_FILE)
-#include "config.h"
-#else
-#include MBEDTLS_CONFIG_FILE
-#endif
-
-#include "ssl.h"
-
-#include <stddef.h>
-#include <stdint.h>
-
-#define MBEDTLS_ERR_NET_SOCKET_FAILED                     -0x0042  /**< Failed to open a socket. */
-#define MBEDTLS_ERR_NET_CONNECT_FAILED                    -0x0044  /**< The connection to the given server / port failed. */
-#define MBEDTLS_ERR_NET_BIND_FAILED                       -0x0046  /**< Binding of the socket failed. */
-#define MBEDTLS_ERR_NET_LISTEN_FAILED                     -0x0048  /**< Could not listen on the socket. */
-#define MBEDTLS_ERR_NET_ACCEPT_FAILED                     -0x004A  /**< Could not accept the incoming connection. */
-#define MBEDTLS_ERR_NET_RECV_FAILED                       -0x004C  /**< Reading information from the socket failed. */
-#define MBEDTLS_ERR_NET_SEND_FAILED                       -0x004E  /**< Sending information through the socket failed. */
-#define MBEDTLS_ERR_NET_CONN_RESET                        -0x0050  /**< Connection was reset by peer. */
-#define MBEDTLS_ERR_NET_UNKNOWN_HOST                      -0x0052  /**< Failed to get an IP address for the given hostname. */
-#define MBEDTLS_ERR_NET_BUFFER_TOO_SMALL                  -0x0043  /**< Buffer is too small to hold the data. */
-#define MBEDTLS_ERR_NET_INVALID_CONTEXT                   -0x0045  /**< The context is invalid, eg because it was free()ed. */
-
-#define MBEDTLS_NET_LISTEN_BACKLOG         10 /**< The backlog that listen() should use. */
-
-#define MBEDTLS_NET_PROTO_TCP 0 /**< The TCP transport protocol */
-#define MBEDTLS_NET_PROTO_UDP 1 /**< The UDP transport protocol */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * Wrapper type for sockets.
- *
- * Currently backed by just a file descriptor, but might be more in the future
- * (eg two file descriptors for combined IPv4 + IPv6 support, or additional
- * structures for hand-made UDP demultiplexing).
- */
-typedef struct
-{
-    int fd;             /**< The underlying file descriptor                 */
-}
-mbedtls_net_context;
-
-/**
- * \brief          Initialize a context
- *                 Just makes the context ready to be used or freed safely.
- *
- * \param ctx      Context to initialize
- */
-void mbedtls_net_init( mbedtls_net_context *ctx );
-
-/**
- * \brief          Initiate a connection with host:port in the given protocol
- *
- * \param ctx      Socket to use
- * \param host     Host to connect to
- * \param port     Port to connect to
- * \param proto    Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP
- *
- * \return         0 if successful, or one of:
- *                      MBEDTLS_ERR_NET_SOCKET_FAILED,
- *                      MBEDTLS_ERR_NET_UNKNOWN_HOST,
- *                      MBEDTLS_ERR_NET_CONNECT_FAILED
- *
- * \note           Sets the socket in connected mode even with UDP.
- */
-int mbedtls_net_connect( mbedtls_net_context *ctx, const char *host, const char *port, int proto );
-
-/**
- * \brief          Create a receiving socket on bind_ip:port in the chosen
- *                 protocol. If bind_ip == NULL, all interfaces are bound.
- *
- * \param ctx      Socket to use
- * \param bind_ip  IP to bind to, can be NULL
- * \param port     Port number to use
- * \param proto    Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP
- *
- * \return         0 if successful, or one of:
- *                      MBEDTLS_ERR_NET_SOCKET_FAILED,
- *                      MBEDTLS_ERR_NET_BIND_FAILED,
- *                      MBEDTLS_ERR_NET_LISTEN_FAILED
- *
- * \note           Regardless of the protocol, opens the sockets and binds it.
- *                 In addition, make the socket listening if protocol is TCP.
- */
-int mbedtls_net_bind( mbedtls_net_context *ctx, const char *bind_ip, const char *port, int proto );
-
-/**
- * \brief           Accept a connection from a remote client
- *
- * \param bind_ctx  Relevant socket
- * \param client_ctx Will contain the connected client socket
- * \param client_ip Will contain the client IP address
- * \param buf_size  Size of the client_ip buffer
- * \param ip_len    Will receive the size of the client IP written
- *
- * \return          0 if successful, or
- *                  MBEDTLS_ERR_NET_ACCEPT_FAILED, or
- *                  MBEDTLS_ERR_NET_BUFFER_TOO_SMALL if buf_size is too small,
- *                  MBEDTLS_ERR_SSL_WANT_READ if bind_fd was set to
- *                  non-blocking and accept() would block.
- */
-int mbedtls_net_accept( mbedtls_net_context *bind_ctx,
-                        mbedtls_net_context *client_ctx,
-                        void *client_ip, size_t buf_size, size_t *ip_len );
-
-/**
- * \brief          Set the socket blocking
- *
- * \param ctx      Socket to set
- *
- * \return         0 if successful, or a non-zero error code
- */
-int mbedtls_net_set_block( mbedtls_net_context *ctx );
-
-/**
- * \brief          Set the socket non-blocking
- *
- * \param ctx      Socket to set
- *
- * \return         0 if successful, or a non-zero error code
- */
-int mbedtls_net_set_nonblock( mbedtls_net_context *ctx );
-
-/**
- * \brief          Portable usleep helper
- *
- * \param usec     Amount of microseconds to sleep
- *
- * \note           Real amount of time slept will not be less than
- *                 select()'s timeout granularity (typically, 10ms).
- */
-void mbedtls_net_usleep( unsigned long usec );
-
-/**
- * \brief          Read at most 'len' characters. If no error occurs,
- *                 the actual amount read is returned.
- *
- * \param ctx      Socket
- * \param buf      The buffer to write to
- * \param len      Maximum length of the buffer
- *
- * \return         the number of bytes received,
- *                 or a non-zero error code; with a non-blocking socket,
- *                 MBEDTLS_ERR_SSL_WANT_READ indicates read() would block.
- */
-int mbedtls_net_recv( void *ctx, unsigned char *buf, size_t len );
-
-/**
- * \brief          Write at most 'len' characters. If no error occurs,
- *                 the actual amount read is returned.
- *
- * \param ctx      Socket
- * \param buf      The buffer to read from
- * \param len      The length of the buffer
- *
- * \return         the number of bytes sent,
- *                 or a non-zero error code; with a non-blocking socket,
- *                 MBEDTLS_ERR_SSL_WANT_WRITE indicates write() would block.
- */
-int mbedtls_net_send( void *ctx, const unsigned char *buf, size_t len );
-
-/**
- * \brief          Read at most 'len' characters, blocking for at most
- *                 'timeout' seconds. If no error occurs, the actual amount
- *                 read is returned.
- *
- * \param ctx      Socket
- * \param buf      The buffer to write to
- * \param len      Maximum length of the buffer
- * \param timeout  Maximum number of milliseconds to wait for data
- *                 0 means no timeout (wait forever)
- *
- * \return         the number of bytes received,
- *                 or a non-zero error code:
- *                 MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out,
- *                 MBEDTLS_ERR_SSL_WANT_READ if interrupted by a signal.
- *
- * \note           This function will block (until data becomes available or
- *                 timeout is reached) even if the socket is set to
- *                 non-blocking. Handling timeouts with non-blocking reads
- *                 requires a different strategy.
- */
-int mbedtls_net_recv_timeout( void *ctx, unsigned char *buf, size_t len,
-                      uint32_t timeout );
-
-/**
- * \brief          Gracefully shutdown the connection and free associated data
- *
- * \param ctx      The context to free
- */
-void mbedtls_net_free( mbedtls_net_context *ctx );
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* net.h */
+#if !defined(MBEDTLS_DEPRECATED_REMOVED)
+#include "mbedtls/net_sockets.h"
+#if defined(MBEDTLS_DEPRECATED_WARNING)
+#warning "Deprecated header file: Superseded by mbedtls/net_sockets.h"
+#endif /* MBEDTLS_DEPRECATED_WARNING */
+#endif /* !MBEDTLS_DEPRECATED_REMOVED */
diff --git a/include/mbedtls/net_sockets.h b/include/mbedtls/net_sockets.h
new file mode 100644
index 0000000..de33552
--- /dev/null
+++ b/include/mbedtls/net_sockets.h
@@ -0,0 +1,225 @@
+/**
+ * \file net_sockets.h
+ *
+ * \brief Network communication functions
+ *
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_NET_SOCKETS_H
+#define MBEDTLS_NET_SOCKETS_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include "ssl.h"
+
+#include <stddef.h>
+#include <stdint.h>
+
+#define MBEDTLS_ERR_NET_SOCKET_FAILED                     -0x0042  /**< Failed to open a socket. */
+#define MBEDTLS_ERR_NET_CONNECT_FAILED                    -0x0044  /**< The connection to the given server / port failed. */
+#define MBEDTLS_ERR_NET_BIND_FAILED                       -0x0046  /**< Binding of the socket failed. */
+#define MBEDTLS_ERR_NET_LISTEN_FAILED                     -0x0048  /**< Could not listen on the socket. */
+#define MBEDTLS_ERR_NET_ACCEPT_FAILED                     -0x004A  /**< Could not accept the incoming connection. */
+#define MBEDTLS_ERR_NET_RECV_FAILED                       -0x004C  /**< Reading information from the socket failed. */
+#define MBEDTLS_ERR_NET_SEND_FAILED                       -0x004E  /**< Sending information through the socket failed. */
+#define MBEDTLS_ERR_NET_CONN_RESET                        -0x0050  /**< Connection was reset by peer. */
+#define MBEDTLS_ERR_NET_UNKNOWN_HOST                      -0x0052  /**< Failed to get an IP address for the given hostname. */
+#define MBEDTLS_ERR_NET_BUFFER_TOO_SMALL                  -0x0043  /**< Buffer is too small to hold the data. */
+#define MBEDTLS_ERR_NET_INVALID_CONTEXT                   -0x0045  /**< The context is invalid, eg because it was free()ed. */
+
+#define MBEDTLS_NET_LISTEN_BACKLOG         10 /**< The backlog that listen() should use. */
+
+#define MBEDTLS_NET_PROTO_TCP 0 /**< The TCP transport protocol */
+#define MBEDTLS_NET_PROTO_UDP 1 /**< The UDP transport protocol */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Wrapper type for sockets.
+ *
+ * Currently backed by just a file descriptor, but might be more in the future
+ * (eg two file descriptors for combined IPv4 + IPv6 support, or additional
+ * structures for hand-made UDP demultiplexing).
+ */
+typedef struct
+{
+    int fd;             /**< The underlying file descriptor                 */
+}
+mbedtls_net_context;
+
+/**
+ * \brief          Initialize a context
+ *                 Just makes the context ready to be used or freed safely.
+ *
+ * \param ctx      Context to initialize
+ */
+void mbedtls_net_init( mbedtls_net_context *ctx );
+
+/**
+ * \brief          Initiate a connection with host:port in the given protocol
+ *
+ * \param ctx      Socket to use
+ * \param host     Host to connect to
+ * \param port     Port to connect to
+ * \param proto    Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP
+ *
+ * \return         0 if successful, or one of:
+ *                      MBEDTLS_ERR_NET_SOCKET_FAILED,
+ *                      MBEDTLS_ERR_NET_UNKNOWN_HOST,
+ *                      MBEDTLS_ERR_NET_CONNECT_FAILED
+ *
+ * \note           Sets the socket in connected mode even with UDP.
+ */
+int mbedtls_net_connect( mbedtls_net_context *ctx, const char *host, const char *port, int proto );
+
+/**
+ * \brief          Create a receiving socket on bind_ip:port in the chosen
+ *                 protocol. If bind_ip == NULL, all interfaces are bound.
+ *
+ * \param ctx      Socket to use
+ * \param bind_ip  IP to bind to, can be NULL
+ * \param port     Port number to use
+ * \param proto    Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP
+ *
+ * \return         0 if successful, or one of:
+ *                      MBEDTLS_ERR_NET_SOCKET_FAILED,
+ *                      MBEDTLS_ERR_NET_BIND_FAILED,
+ *                      MBEDTLS_ERR_NET_LISTEN_FAILED
+ *
+ * \note           Regardless of the protocol, opens the sockets and binds it.
+ *                 In addition, make the socket listening if protocol is TCP.
+ */
+int mbedtls_net_bind( mbedtls_net_context *ctx, const char *bind_ip, const char *port, int proto );
+
+/**
+ * \brief           Accept a connection from a remote client
+ *
+ * \param bind_ctx  Relevant socket
+ * \param client_ctx Will contain the connected client socket
+ * \param client_ip Will contain the client IP address
+ * \param buf_size  Size of the client_ip buffer
+ * \param ip_len    Will receive the size of the client IP written
+ *
+ * \return          0 if successful, or
+ *                  MBEDTLS_ERR_NET_ACCEPT_FAILED, or
+ *                  MBEDTLS_ERR_NET_BUFFER_TOO_SMALL if buf_size is too small,
+ *                  MBEDTLS_ERR_SSL_WANT_READ if bind_fd was set to
+ *                  non-blocking and accept() would block.
+ */
+int mbedtls_net_accept( mbedtls_net_context *bind_ctx,
+                        mbedtls_net_context *client_ctx,
+                        void *client_ip, size_t buf_size, size_t *ip_len );
+
+/**
+ * \brief          Set the socket blocking
+ *
+ * \param ctx      Socket to set
+ *
+ * \return         0 if successful, or a non-zero error code
+ */
+int mbedtls_net_set_block( mbedtls_net_context *ctx );
+
+/**
+ * \brief          Set the socket non-blocking
+ *
+ * \param ctx      Socket to set
+ *
+ * \return         0 if successful, or a non-zero error code
+ */
+int mbedtls_net_set_nonblock( mbedtls_net_context *ctx );
+
+/**
+ * \brief          Portable usleep helper
+ *
+ * \param usec     Amount of microseconds to sleep
+ *
+ * \note           Real amount of time slept will not be less than
+ *                 select()'s timeout granularity (typically, 10ms).
+ */
+void mbedtls_net_usleep( unsigned long usec );
+
+/**
+ * \brief          Read at most 'len' characters. If no error occurs,
+ *                 the actual amount read is returned.
+ *
+ * \param ctx      Socket
+ * \param buf      The buffer to write to
+ * \param len      Maximum length of the buffer
+ *
+ * \return         the number of bytes received,
+ *                 or a non-zero error code; with a non-blocking socket,
+ *                 MBEDTLS_ERR_SSL_WANT_READ indicates read() would block.
+ */
+int mbedtls_net_recv( void *ctx, unsigned char *buf, size_t len );
+
+/**
+ * \brief          Write at most 'len' characters. If no error occurs,
+ *                 the actual amount read is returned.
+ *
+ * \param ctx      Socket
+ * \param buf      The buffer to read from
+ * \param len      The length of the buffer
+ *
+ * \return         the number of bytes sent,
+ *                 or a non-zero error code; with a non-blocking socket,
+ *                 MBEDTLS_ERR_SSL_WANT_WRITE indicates write() would block.
+ */
+int mbedtls_net_send( void *ctx, const unsigned char *buf, size_t len );
+
+/**
+ * \brief          Read at most 'len' characters, blocking for at most
+ *                 'timeout' seconds. If no error occurs, the actual amount
+ *                 read is returned.
+ *
+ * \param ctx      Socket
+ * \param buf      The buffer to write to
+ * \param len      Maximum length of the buffer
+ * \param timeout  Maximum number of milliseconds to wait for data
+ *                 0 means no timeout (wait forever)
+ *
+ * \return         the number of bytes received,
+ *                 or a non-zero error code:
+ *                 MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out,
+ *                 MBEDTLS_ERR_SSL_WANT_READ if interrupted by a signal.
+ *
+ * \note           This function will block (until data becomes available or
+ *                 timeout is reached) even if the socket is set to
+ *                 non-blocking. Handling timeouts with non-blocking reads
+ *                 requires a different strategy.
+ */
+int mbedtls_net_recv_timeout( void *ctx, unsigned char *buf, size_t len,
+                      uint32_t timeout );
+
+/**
+ * \brief          Gracefully shutdown the connection and free associated data
+ *
+ * \param ctx      The context to free
+ */
+void mbedtls_net_free( mbedtls_net_context *ctx );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* net_sockets.h */
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index c0bfd3e..1c0513d 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -1105,9 +1105,10 @@
  *                 \c mbedtls_ssl_recv_t and \c mbedtls_ssl_recv_timeout_t for
  *                 the conventions those callbacks must follow.
  *
- * \note           On some platforms, net.c provides \c mbedtls_net_send(),
- *                 \c mbedtls_net_recv() and \c mbedtls_net_recv_timeout()
- *                 that are suitable to be used here.
+ * \note           On some platforms, net_sockets.c provides
+ *                 \c mbedtls_net_send(), \c mbedtls_net_recv() and
+ *                 \c mbedtls_net_recv_timeout() that are suitable to be used
+ *                 here.
  */
 void mbedtls_ssl_set_bio( mbedtls_ssl_context *ssl,
                           void *p_bio,