diff --git a/include/mbedtls/aes.h b/include/mbedtls/aes.h
index dd5c118..f6603d5 100644
--- a/include/mbedtls/aes.h
+++ b/include/mbedtls/aes.h
@@ -13,6 +13,11 @@
  *          <em>ISO/IEC 18033-2:2006: Information technology -- Security
  *          techniques -- Encryption algorithms -- Part 2: Asymmetric
  *          ciphers</em>.
+ *
+ *          The AES-XTS block mode is standardized by NIST SP 800-38E
+ *          <https://nvlpubs.nist.gov/nistpubs/legacy/sp/nistspecialpublication800-38e.pdf>
+ *          and described in detail by IEEE P1619
+ *          <https://ieeexplore.ieee.org/servlet/opac?punumber=4375278>.
  */
 
 /*  Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved.
@@ -89,6 +94,19 @@
 }
 mbedtls_aes_context;
 
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+ * \brief The AES XTS context-type definition.
+ */
+typedef struct
+{
+    mbedtls_aes_context crypt; /*!< The AES context to use for AES block
+                                        encryption or decryption. */
+    mbedtls_aes_context tweak; /*!< The AES context used for tweak
+                                        computation. */
+} mbedtls_aes_xts_context;
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
 #else  /* MBEDTLS_AES_ALT */
 #include "aes_alt.h"
 #endif /* MBEDTLS_AES_ALT */
@@ -110,6 +128,25 @@
  */
 void mbedtls_aes_free( mbedtls_aes_context *ctx );
 
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+ * \brief          This function initializes the specified AES XTS context.
+ *
+ *                 It must be the first API called before using
+ *                 the context.
+ *
+ * \param ctx      The AES XTS context to initialize.
+ */
+void mbedtls_aes_xts_init( mbedtls_aes_xts_context *ctx );
+
+/**
+ * \brief          This function releases and clears the specified AES XTS context.
+ *
+ * \param ctx      The AES XTS context to clear.
+ */
+void mbedtls_aes_xts_free( mbedtls_aes_xts_context *ctx );
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
 /**
  * \brief          This function sets the encryption key.
  *
@@ -142,6 +179,44 @@
 int mbedtls_aes_setkey_dec( mbedtls_aes_context *ctx, const unsigned char *key,
                     unsigned int keybits );
 
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+ * \brief          This function prepares an XTS context for encryption and
+ *                 sets the encryption key.
+ *
+ * \param ctx      The AES XTS context to which the key should be bound.
+ * \param key      The encryption key. This is comprised of the XTS key1
+ *                 concatenated with the XTS key2.
+ * \param keybits  The size of \p key passed in bits. Valid options are:
+ *                 <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
+ *                 <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
+ *
+ * \return         \c 0 on success.
+ * \return         #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
+ */
+int mbedtls_aes_xts_setkey_enc( mbedtls_aes_xts_context *ctx,
+                                const unsigned char *key,
+                                unsigned int keybits );
+
+/**
+ * \brief          This function prepares an XTS context for decryption and
+ *                 sets the decryption key.
+ *
+ * \param ctx      The AES XTS context to which the key should be bound.
+ * \param key      The decryption key. This is comprised of the XTS key1
+ *                 concatenated with the XTS key2.
+ * \param keybits  The size of \p key passed in bits. Valid options are:
+ *                 <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
+ *                 <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
+ *
+ * \return         \c 0 on success.
+ * \return         #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
+ */
+int mbedtls_aes_xts_setkey_dec( mbedtls_aes_xts_context *ctx,
+                                const unsigned char *key,
+                                unsigned int keybits );
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
 /**
  * \brief          This function performs an AES single-block encryption or
  *                 decryption operation.
@@ -213,6 +288,49 @@
                     unsigned char *output );
 #endif /* MBEDTLS_CIPHER_MODE_CBC */
 
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+ * \brief      This function performs an AES-XTS encryption or decryption
+ *             operation for an entire XTS data unit.
+ *
+ *             AES-XTS encrypts or decrypts blocks based on their location as
+ *             defined by a data unit number. The data unit number must be
+ *             provided by \p data_unit.
+ *
+ *             NIST SP 800-38E limits the maximum size of a data unit to 2^20
+ *             AES blocks. If the data unit is larger than this, this function
+ *             returns #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH.
+ *
+ * \param ctx          The AES XTS context to use for AES XTS operations.
+ * \param mode         The AES operation: #MBEDTLS_AES_ENCRYPT or
+ *                     #MBEDTLS_AES_DECRYPT.
+ * \param length       The length of a data unit in bytes. This can be any
+ *                     length between 16 bytes and 2^24 bytes inclusive
+ *                     (between 1 and 2^20 block cipher blocks).
+ * \param data_unit    The address of the data unit encoded as an array of 16
+ *                     bytes in little-endian format. For disk encryption, this
+ *                     is typically the index of the block device sector that
+ *                     contains the data.
+ * \param input        The buffer holding the input data (which is an entire
+ *                     data unit). This function reads \p length bytes from \p
+ *                     input.
+ * \param output       The buffer holding the output data (which is an entire
+ *                     data unit). This function writes \p length bytes to \p
+ *                     output.
+ *
+ * \return             \c 0 on success.
+ * \return             #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH if \p length is
+ *                     smaller than an AES block in size (16 bytes) or if \p
+ *                     length is larger than 2^20 blocks (16 MiB).
+ */
+int mbedtls_aes_crypt_xts( mbedtls_aes_xts_context *ctx,
+                           int mode,
+                           size_t length,
+                           const unsigned char data_unit[16],
+                           const unsigned char *input,
+                           unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
 #if defined(MBEDTLS_CIPHER_MODE_CFB)
 /**
  * \brief This function performs an AES-CFB128 encryption or decryption
@@ -296,6 +414,56 @@
                     unsigned char *output );
 #endif /*MBEDTLS_CIPHER_MODE_CFB */
 
+#if defined(MBEDTLS_CIPHER_MODE_OFB)
+/**
+ * \brief       This function performs an AES-OFB (Output Feedback Mode)
+ *              encryption or decryption operation.
+ *
+ *              For OFB, you must set up the context with
+ *              mbedtls_aes_setkey_enc(), regardless of whether you are
+ *              performing an encryption or decryption operation. This is
+ *              because OFB mode uses the same key schedule for encryption and
+ *              decryption.
+ *
+ *              The OFB operation is identical for encryption or decryption,
+ *              therefore no operation mode needs to be specified.
+ *
+ * \note        Upon exit, the content of iv, the Initialisation Vector, is
+ *              updated so that you can call the same function again on the next
+ *              block(s) of data and get the same result as if it was encrypted
+ *              in one call. This allows a "streaming" usage, by initialising
+ *              iv_off to 0 before the first call, and preserving its value
+ *              between calls.
+ *
+ *              For non-streaming use, the iv should be initialised on each call
+ *              to a unique value, and iv_off set to 0 on each call.
+ *
+ *              If you need to retain the contents of the initialisation vector,
+ *              you must either save it manually or use the cipher module
+ *              instead.
+ *
+ * \warning     For the OFB mode, the initialisation vector must be unique
+ *              every encryption operation. Reuse of an initialisation vector
+ *              will compromise security.
+ *
+ * \param ctx      The AES context to use for encryption or decryption.
+ * \param length   The length of the input data.
+ * \param iv_off   The offset in IV (updated after use).
+ * \param iv       The initialization vector (updated after use).
+ * \param input    The buffer holding the input data.
+ * \param output   The buffer holding the output data.
+ *
+ * \return         \c 0 on success.
+ */
+int mbedtls_aes_crypt_ofb( mbedtls_aes_context *ctx,
+                       size_t length,
+                       size_t *iv_off,
+                       unsigned char iv[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+
+#endif /* MBEDTLS_CIPHER_MODE_OFB */
+
 #if defined(MBEDTLS_CIPHER_MODE_CTR)
 /**
  * \brief      This function performs an AES-CTR encryption or decryption
diff --git a/include/mbedtls/ccm.h b/include/mbedtls/ccm.h
index 8585ce5..5d727e7 100644
--- a/include/mbedtls/ccm.h
+++ b/include/mbedtls/ccm.h
@@ -14,6 +14,18 @@
  * <li>Nonce - A unique value that is assigned to the payload and the
  * associated data.</li></ul>
  *
+ * Definition of CCM:
+ * http://csrc.nist.gov/publications/nistpubs/800-38C/SP800-38C_updated-July20_2007.pdf
+ * RFC 3610 "Counter with CBC-MAC (CCM)"
+ *
+ * Related:
+ * RFC 5116 "An Interface and Algorithms for Authenticated Encryption"
+ *
+ * Definition of CCM*:
+ * IEEE 802.15.4 - IEEE Standard for Local and metropolitan area networks
+ * Integer representation is fixed most-significant-octet-first order and
+ * the representation of octets is most-significant-bit-first order. This is
+ * consistent with RFC 3610.
  */
 /*
  *  Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
@@ -102,7 +114,6 @@
 /**
  * \brief           This function encrypts a buffer using CCM.
  *
- *
  * \note            The tag is written to a separate buffer. To concatenate
  *                  the \p tag with the \p output, as done in <em>RFC-3610:
  *                  Counter with CBC-MAC (CCM)</em>, use
@@ -112,15 +123,17 @@
  * \param ctx       The CCM context to use for encryption.
  * \param length    The length of the input data in Bytes.
  * \param iv        Initialization vector (nonce).
- * \param iv_len    The length of the IV in Bytes: 7, 8, 9, 10, 11, 12, or 13.
+ * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
+ *                  or 13. The length L of the message length field is
+ *                  15 - \p iv_len.
  * \param add       The additional data field.
  * \param add_len   The length of additional data in Bytes.
  *                  Must be less than 2^16 - 2^8.
  * \param input     The buffer holding the input data.
  * \param output    The buffer holding the output data.
  *                  Must be at least \p length Bytes wide.
- * \param tag       The buffer holding the tag.
- * \param tag_len   The length of the tag to generate in Bytes:
+ * \param tag       The buffer holding the authentication field.
+ * \param tag_len   The length of the authentication field to generate in Bytes:
  *                  4, 6, 8, 10, 12, 14 or 16.
  *
  * \return          \c 0 on success.
@@ -133,21 +146,64 @@
                          unsigned char *tag, size_t tag_len );
 
 /**
- * \brief           This function performs a CCM authenticated decryption of a
- *                  buffer.
+ * \brief           This function encrypts a buffer using CCM*.
  *
- * \param ctx       The CCM context to use for decryption.
+ * \note            The tag is written to a separate buffer. To concatenate
+ *                  the \p tag with the \p output, as done in <em>RFC-3610:
+ *                  Counter with CBC-MAC (CCM)</em>, use
+ *                  \p tag = \p output + \p length, and make sure that the
+ *                  output buffer is at least \p length + \p tag_len wide.
+ *
+ * \note            When using this function in a variable tag length context,
+ *                  the tag length has to be encoded into the \p iv passed to
+ *                  this function.
+ *
+ * \param ctx       The CCM context to use for encryption.
  * \param length    The length of the input data in Bytes.
- * \param iv        Initialization vector.
- * \param iv_len    The length of the IV in Bytes: 7, 8, 9, 10, 11, 12, or 13.
+ * \param iv        Initialization vector (nonce).
+ * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
+ *                  or 13. The length L of the message length field is
+ *                  15 - \p iv_len.
  * \param add       The additional data field.
  * \param add_len   The length of additional data in Bytes.
  *                  Must be less than 2^16 - 2^8.
  * \param input     The buffer holding the input data.
  * \param output    The buffer holding the output data.
  *                  Must be at least \p length Bytes wide.
- * \param tag       The buffer holding the tag.
- * \param tag_len   The length of the tag in Bytes.
+ * \param tag       The buffer holding the authentication field.
+ * \param tag_len   The length of the authentication field to generate in Bytes:
+ *                  0, 4, 6, 8, 10, 12, 14 or 16.
+ *
+ * \warning         Passing 0 as \p tag_len means that the message is no
+ *                  longer authenticated.
+ *
+ * \return          \c 0 on success.
+ * \return          A CCM or cipher-specific error code on failure.
+ */
+int mbedtls_ccm_star_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length,
+                         const unsigned char *iv, size_t iv_len,
+                         const unsigned char *add, size_t add_len,
+                         const unsigned char *input, unsigned char *output,
+                         unsigned char *tag, size_t tag_len );
+
+/**
+ * \brief           This function performs a CCM authenticated decryption of a
+ *                  buffer.
+ *
+ * \param ctx       The CCM context to use for decryption.
+ * \param length    The length of the input data in Bytes.
+ * \param iv        Initialization vector (nonce).
+ * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
+ *                  or 13. The length L of the message length field is
+ *                  15 - \p iv_len.
+ * \param add       The additional data field.
+ * \param add_len   The length of additional data in Bytes.
+ *                  Must be less than 2^16 - 2^8.
+ * \param input     The buffer holding the input data.
+ * \param output    The buffer holding the output data.
+ *                  Must be at least \p length Bytes wide.
+ * \param tag       The buffer holding the authentication field.
+ * \param tag_len   The length of the authentication field in Bytes.
  *                  4, 6, 8, 10, 12, 14 or 16.
  *
  * \return          \c 0 on success. This indicates that the message is authentic.
@@ -160,6 +216,43 @@
                       const unsigned char *input, unsigned char *output,
                       const unsigned char *tag, size_t tag_len );
 
+/**
+ * \brief           This function performs a CCM* authenticated decryption of a
+ *                  buffer.
+ *
+ * \note            When using this function in a variable tag length context,
+ *                  the tag length has to be decoded from \p iv and passed to
+ *                  this function as \p tag_len. (\p tag needs to be adjusted
+ *                  accordingly.)
+ *
+ * \param ctx       The CCM context to use for decryption.
+ * \param length    The length of the input data in Bytes.
+ * \param iv        Initialization vector (nonce).
+ * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
+ *                  or 13. The length L of the message length field is
+ *                  15 - \p iv_len.
+ * \param add       The additional data field.
+ * \param add_len   The length of additional data in Bytes.
+ *                  Must be less than 2^16 - 2^8.
+ * \param input     The buffer holding the input data.
+ * \param output    The buffer holding the output data.
+ *                  Must be at least \p length Bytes wide.
+ * \param tag       The buffer holding the authentication field.
+ * \param tag_len   The length of the authentication field in Bytes.
+ *                  0, 4, 6, 8, 10, 12, 14 or 16.
+ *
+ * \warning         Passing 0 as \p tag_len means that the message is no
+ *                  longer authenticated.
+ *
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_CCM_AUTH_FAILED if the tag does not match.
+ * \return          A cipher-specific error code on calculation failure.
+ */
+int mbedtls_ccm_star_auth_decrypt( mbedtls_ccm_context *ctx, size_t length,
+                      const unsigned char *iv, size_t iv_len,
+                      const unsigned char *add, size_t add_len,
+                      const unsigned char *input, unsigned char *output,
+                      const unsigned char *tag, size_t tag_len );
 
 #if defined(MBEDTLS_SELF_TEST) && defined(MBEDTLS_AES_C)
 /**
diff --git a/include/mbedtls/check_config.h b/include/mbedtls/check_config.h
index be80332..4689f3a 100644
--- a/include/mbedtls/check_config.h
+++ b/include/mbedtls/check_config.h
@@ -4,7 +4,7 @@
  * \brief Consistency checks for configuration options
  */
 /*
- *  Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
+ *  Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
  *  SPDX-License-Identifier: Apache-2.0
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may
@@ -191,6 +191,10 @@
 #error "MBEDTLS_HAVEGE_C defined, but not all prerequisites"
 #endif
 
+#if defined(MBEDTLS_HKDF_C) && !defined(MBEDTLS_MD_C)
+#error "MBEDTLS_HKDF_C defined, but not all prerequisites"
+#endif
+
 #if defined(MBEDTLS_HMAC_DRBG_C) && !defined(MBEDTLS_MD_C)
 #error "MBEDTLS_HMAC_DRBG_C defined, but not all prerequisites"
 #endif
diff --git a/include/mbedtls/cipher.h b/include/mbedtls/cipher.h
index 46b3bdf..0a545eb 100644
--- a/include/mbedtls/cipher.h
+++ b/include/mbedtls/cipher.h
@@ -164,6 +164,11 @@
     MBEDTLS_CIPHER_ARIA_128_CCM,         /**< Aria cipher with 128-bit key and CCM mode. */
     MBEDTLS_CIPHER_ARIA_192_CCM,         /**< Aria cipher with 192-bit key and CCM mode. */
     MBEDTLS_CIPHER_ARIA_256_CCM,         /**< Aria cipher with 256-bit key and CCM mode. */
+    MBEDTLS_CIPHER_AES_128_OFB,          /**< AES 128-bit cipher in OFB mode. */
+    MBEDTLS_CIPHER_AES_192_OFB,          /**< AES 192-bit cipher in OFB mode. */
+    MBEDTLS_CIPHER_AES_256_OFB,          /**< AES 256-bit cipher in OFB mode. */
+    MBEDTLS_CIPHER_AES_128_XTS,          /**< AES 128-bit cipher in XTS block mode. */
+    MBEDTLS_CIPHER_AES_256_XTS,          /**< AES 256-bit cipher in XTS block mode. */
 } mbedtls_cipher_type_t;
 
 /** Supported cipher modes. */
@@ -172,11 +177,12 @@
     MBEDTLS_MODE_ECB,                    /**< The ECB cipher mode. */
     MBEDTLS_MODE_CBC,                    /**< The CBC cipher mode. */
     MBEDTLS_MODE_CFB,                    /**< The CFB cipher mode. */
-    MBEDTLS_MODE_OFB,                    /**< The OFB cipher mode - unsupported. */
+    MBEDTLS_MODE_OFB,                    /**< The OFB cipher mode. */
     MBEDTLS_MODE_CTR,                    /**< The CTR cipher mode. */
     MBEDTLS_MODE_GCM,                    /**< The GCM cipher mode. */
     MBEDTLS_MODE_STREAM,                 /**< The stream cipher mode. */
     MBEDTLS_MODE_CCM,                    /**< The CCM cipher mode. */
+    MBEDTLS_MODE_XTS,                    /**< The XTS cipher mode. */
 } mbedtls_cipher_mode_t;
 
 /** Supported cipher padding types. */
@@ -292,7 +298,8 @@
     /** Number of Bytes that have not been processed yet. */
     size_t unprocessed_len;
 
-    /** Current IV or NONCE_COUNTER for CTR-mode. */
+    /** Current IV or NONCE_COUNTER for CTR-mode, data unit (or sector) number
+     * for XTS-mode. */
     unsigned char iv[MBEDTLS_MAX_IV_LENGTH];
 
     /** IV size in Bytes, for ciphers with variable-length IVs. */
diff --git a/include/mbedtls/cipher_internal.h b/include/mbedtls/cipher_internal.h
index 969ff9c..c6def0b 100644
--- a/include/mbedtls/cipher_internal.h
+++ b/include/mbedtls/cipher_internal.h
@@ -64,6 +64,14 @@
                      unsigned char *output );
 #endif
 
+#if defined(MBEDTLS_CIPHER_MODE_OFB)
+    /** Encrypt using OFB (Full length) */
+    int (*ofb_func)( void *ctx, size_t length, size_t *iv_off,
+                     unsigned char *iv,
+                     const unsigned char *input,
+                     unsigned char *output );
+#endif
+
 #if defined(MBEDTLS_CIPHER_MODE_CTR)
     /** Encrypt using CTR */
     int (*ctr_func)( void *ctx, size_t length, size_t *nc_off,
@@ -71,6 +79,13 @@
                      const unsigned char *input, unsigned char *output );
 #endif
 
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+    /** Encrypt or decrypt using XTS. */
+    int (*xts_func)( void *ctx, mbedtls_operation_t mode, size_t length,
+                     const unsigned char data_unit[16],
+                     const unsigned char *input, unsigned char *output );
+#endif
+
 #if defined(MBEDTLS_CIPHER_MODE_STREAM)
     /** Encrypt using STREAM */
     int (*stream_func)( void *ctx, size_t length,
diff --git a/include/mbedtls/config.h b/include/mbedtls/config.h
index f13b28a..08bda95 100644
--- a/include/mbedtls/config.h
+++ b/include/mbedtls/config.h
@@ -8,7 +8,7 @@
  *  memory footprint.
  */
 /*
- *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
  *  SPDX-License-Identifier: Apache-2.0
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may
@@ -516,6 +516,20 @@
 #define MBEDTLS_CIPHER_MODE_CTR
 
 /**
+ * \def MBEDTLS_CIPHER_MODE_OFB
+ *
+ * Enable Output Feedback mode (OFB) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_OFB
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_XTS
+ *
+ * Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES.
+ */
+#define MBEDTLS_CIPHER_MODE_XTS
+
+/**
  * \def MBEDTLS_CIPHER_NULL_CIPHER
  *
  * Enable NULL cipher.
@@ -1152,6 +1166,17 @@
 #define MBEDTLS_SSL_ALL_ALERT_MESSAGES
 
 /**
+ * \def MBEDTLS_SSL_ASYNC_PRIVATE
+ *
+ * Enable asynchronous external private key operations in SSL. This allows
+ * you to configure an SSL connection to call an external cryptographic
+ * module to perform private key operations instead of performing the
+ * operation inside the library.
+ *
+ */
+//#define MBEDTLS_SSL_ASYNC_PRIVATE
+
+/**
  * \def MBEDTLS_SSL_DEBUG_ALL
  *
  * Enable the debug messages in SSL module for all issues.
@@ -2167,6 +2192,21 @@
 //#define MBEDTLS_HAVEGE_C
 
 /**
+ * \def MBEDTLS_HKDF_C
+ *
+ * Enable the HKDF algorithm (RFC 5869).
+ *
+ * Module:  library/hkdf.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_MD_C
+ *
+ * This module adds support for the Hashed Message Authentication Code
+ * (HMAC)-based key derivation function (HKDF).
+ */
+#define MBEDTLS_HKDF_C
+
+/**
  * \def MBEDTLS_HMAC_DRBG_C
  *
  * Enable the HMAC_DRBG random generator.
diff --git a/include/mbedtls/error.h b/include/mbedtls/error.h
index 29c1c21..2a606ad 100644
--- a/include/mbedtls/error.h
+++ b/include/mbedtls/error.h
@@ -4,7 +4,7 @@
  * \brief Error to string translation
  */
 /*
- *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
  *  SPDX-License-Identifier: Apache-2.0
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may
@@ -89,8 +89,9 @@
  * RSA       4   11
  * ECP       4   10 (Started from top)
  * MD        5   5
+ * HKDF      5   1 (Started from top)
  * CIPHER    6   8
- * SSL       6   22 (Started from top)
+ * SSL       6   23 (Started from top)
  * SSL       7   31
  *
  * Module dependent error code (5 bits 0x.00.-0x.F8.)
diff --git a/include/mbedtls/gcm.h b/include/mbedtls/gcm.h
index bec5577..87535ab 100644
--- a/include/mbedtls/gcm.h
+++ b/include/mbedtls/gcm.h
@@ -113,21 +113,41 @@
  *                  the same as input buffer. If the buffers overlap, the output
  *                  buffer must trail at least 8 Bytes behind the input buffer.
  *
+ * \warning         When this function performs a decryption, it outputs the
+ *                  authentication tag and does not verify that the data is
+ *                  authentic. You should use this function to perform encryption
+ *                  only. For decryption, use mbedtls_gcm_auth_decrypt() instead.
+ *
  * \param ctx       The GCM context to use for encryption or decryption.
- * \param mode      The operation to perform: #MBEDTLS_GCM_ENCRYPT or
- *                  #MBEDTLS_GCM_DECRYPT.
- * \param length    The length of the input data. This must be a multiple of
- *                  16 except in the last call before mbedtls_gcm_finish().
+ * \param mode      The operation to perform:
+ *                  - #MBEDTLS_GCM_ENCRYPT to perform authenticated encryption.
+ *                    The ciphertext is written to \p output and the
+ *                    authentication tag is written to \p tag.
+ *                  - #MBEDTLS_GCM_DECRYPT to perform decryption.
+ *                    The plaintext is written to \p output and the
+ *                    authentication tag is written to \p tag.
+ *                    Note that this mode is not recommended, because it does
+ *                    not verify the authenticity of the data. For this reason,
+ *                    you should use mbedtls_gcm_auth_decrypt() instead of
+ *                    calling this function in decryption mode.
+ * \param length    The length of the input data, which is equal to the length
+ *                  of the output data.
  * \param iv        The initialization vector.
  * \param iv_len    The length of the IV.
  * \param add       The buffer holding the additional data.
  * \param add_len   The length of the additional data.
- * \param input     The buffer holding the input data.
- * \param output    The buffer for holding the output data.
+ * \param input     The buffer holding the input data. Its size is \b length.
+ * \param output    The buffer for holding the output data. It must have room
+ *                  for \b length bytes.
  * \param tag_len   The length of the tag to generate.
  * \param tag       The buffer for holding the tag.
  *
- * \return         \c 0 on success.
+ * \return          \c 0 if the encryption or decryption was performed
+ *                  successfully. Note that in #MBEDTLS_GCM_DECRYPT mode,
+ *                  this does not indicate that the data is authentic.
+ * \return          #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths are not valid.
+ * \return          #MBEDTLS_ERR_GCM_HW_ACCEL_FAILED or a cipher-specific
+ *                  error code if the encryption or decryption failed.
  */
 int mbedtls_gcm_crypt_and_tag( mbedtls_gcm_context *ctx,
                        int mode,
@@ -150,19 +170,23 @@
  *                  must trail at least 8 Bytes behind the input buffer.
  *
  * \param ctx       The GCM context.
- * \param length    The length of the input data. This must be a multiple
- *                  of 16 except in the last call before mbedtls_gcm_finish().
+ * \param length    The length of the ciphertext to decrypt, which is also
+ *                  the length of the decrypted plaintext.
  * \param iv        The initialization vector.
  * \param iv_len    The length of the IV.
  * \param add       The buffer holding the additional data.
  * \param add_len   The length of the additional data.
- * \param tag       The buffer holding the tag.
- * \param tag_len   The length of the tag.
- * \param input     The buffer holding the input data.
- * \param output    The buffer for holding the output data.
+ * \param tag       The buffer holding the tag to verify.
+ * \param tag_len   The length of the tag to verify.
+ * \param input     The buffer holding the ciphertext. Its size is \b length.
+ * \param output    The buffer for holding the decrypted plaintext. It must
+ *                  have room for \b length bytes.
  *
- * \return         0 if successful and authenticated.
- * \return         #MBEDTLS_ERR_GCM_AUTH_FAILED if the tag does not match.
+ * \return          \c 0 if successful and authenticated.
+ * \return          #MBEDTLS_ERR_GCM_AUTH_FAILED if the tag does not match.
+ * \return          #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths are not valid.
+ * \return          #MBEDTLS_ERR_GCM_HW_ACCEL_FAILED or a cipher-specific
+ *                  error code if the decryption failed.
  */
 int mbedtls_gcm_auth_decrypt( mbedtls_gcm_context *ctx,
                       size_t length,
diff --git a/include/mbedtls/hkdf.h b/include/mbedtls/hkdf.h
new file mode 100644
index 0000000..6833e72
--- /dev/null
+++ b/include/mbedtls/hkdf.h
@@ -0,0 +1,125 @@
+/**
+ * \file hkdf.h
+ *
+ * \brief   This file contains the HKDF interface.
+ *
+ *          The HMAC-based Extract-and-Expand Key Derivation Function (HKDF) is
+ *          specified by RFC 5869.
+ */
+/*
+ * Copyright (C) 2016-2018, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_HKDF_H
+#define MBEDTLS_HKDF_H
+
+#include "md.h"
+
+/**
+ *  \name HKDF Error codes
+ *  \{
+ */
+#define MBEDTLS_ERR_HKDF_BAD_INPUT_DATA  -0x5F80  /**< Bad input parameters to function. */
+/* \} name */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *  \brief  This is the HMAC-based Extract-and-Expand Key Derivation Function
+ *          (HKDF).
+ *
+ *  \param  md        A hash function; md.size denotes the length of the hash
+ *                    function output in bytes.
+ *  \param  salt      An optional salt value (a non-secret random value);
+ *                    if the salt is not provided, a string of all zeros of
+ *                    md.size length is used as the salt.
+ *  \param  salt_len  The length in bytes of the optional \p salt.
+ *  \param  ikm       The input keying material.
+ *  \param  ikm_len   The length in bytes of \p ikm.
+ *  \param  info      An optional context and application specific information
+ *                    string. This can be a zero-length string.
+ *  \param  info_len  The length of \p info in bytes.
+ *  \param  okm       The output keying material of \p okm_len bytes.
+ *  \param  okm_len   The length of the output keying material in bytes. This
+ *                    must be less than or equal to 255 * md.size bytes.
+ *
+ *  \return 0 on success.
+ *  \return #MBEDTLS_ERR_HKDF_BAD_INPUT_DATA when the parameters are invalid.
+ *  \return An MBEDTLS_ERR_MD_* error for errors returned from the underlying
+ *          MD layer.
+ */
+int mbedtls_hkdf( const mbedtls_md_info_t *md, const unsigned char *salt,
+                  size_t salt_len, const unsigned char *ikm, size_t ikm_len,
+                  const unsigned char *info, size_t info_len,
+                  unsigned char *okm, size_t okm_len );
+
+/**
+ *  \brief  Take the input keying material \p ikm and extract from it a
+ *          fixed-length pseudorandom key \p prk.
+ *
+ *  \param       md        A hash function; md.size denotes the length of the
+ *                         hash function output in bytes.
+ *  \param       salt      An optional salt value (a non-secret random value);
+ *                         if the salt is not provided, a string of all zeros
+ *                         of md.size length is used as the salt.
+ *  \param       salt_len  The length in bytes of the optional \p salt.
+ *  \param       ikm       The input keying material.
+ *  \param       ikm_len   The length in bytes of \p ikm.
+ *  \param[out]  prk       A pseudorandom key of at least md.size bytes.
+ *
+ *  \return 0 on success.
+ *  \return #MBEDTLS_ERR_HKDF_BAD_INPUT_DATA when the parameters are invalid.
+ *  \return An MBEDTLS_ERR_MD_* error for errors returned from the underlying
+ *          MD layer.
+ */
+int mbedtls_hkdf_extract( const mbedtls_md_info_t *md,
+                          const unsigned char *salt, size_t salt_len,
+                          const unsigned char *ikm, size_t ikm_len,
+                          unsigned char *prk );
+
+/**
+ *  \brief  Expand the supplied \p prk into several additional pseudorandom
+ *          keys, which is the output of the HKDF.
+ *
+ *  \param  md        A hash function; md.size denotes the length of the hash
+ *                    function output in bytes.
+ *  \param  prk       A pseudorandom key of at least md.size bytes. \p prk is usually,
+ *                    the output from the HKDF extract step.
+ *  \param  prk_len   The length in bytes of \p prk.
+ *  \param  info      An optional context and application specific information
+ *                    string. This can be a zero-length string.
+ *  \param  info_len  The length of \p info in bytes.
+ *  \param  okm       The output keying material of \p okm_len bytes.
+ *  \param  okm_len   The length of the output keying material in bytes. This
+ *                    must be less than or equal to 255 * md.size bytes.
+ *
+ *  \return 0 on success.
+ *  \return #MBEDTLS_ERR_HKDF_BAD_INPUT_DATA when the parameters are invalid.
+ *  \return An MBEDTLS_ERR_MD_* error for errors returned from the underlying
+ *          MD layer.
+ */
+int mbedtls_hkdf_expand( const mbedtls_md_info_t *md, const unsigned char *prk,
+                         size_t prk_len, const unsigned char *info,
+                         size_t info_len, unsigned char *okm, size_t okm_len );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* hkdf.h */
diff --git a/include/mbedtls/platform.h b/include/mbedtls/platform.h
index bba7709..9d9c529 100644
--- a/include/mbedtls/platform.h
+++ b/include/mbedtls/platform.h
@@ -121,8 +121,8 @@
 #else
 /* For size_t */
 #include <stddef.h>
-extern void * (*mbedtls_calloc)( size_t n, size_t size );
-extern void (*mbedtls_free)( void *ptr );
+extern void *mbedtls_calloc( size_t n, size_t size );
+extern void mbedtls_free( void *ptr );
 
 /**
  * \brief               This function dynamically sets the memory-management
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index def20db..1a80640 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -120,7 +120,8 @@
 #define MBEDTLS_ERR_SSL_NON_FATAL                         -0x6680  /**< The alert message received indicates a non-fatal error. */
 #define MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH               -0x6600  /**< Couldn't set the hash for verifying CertificateVerify */
 #define MBEDTLS_ERR_SSL_CONTINUE_PROCESSING               -0x6580  /**< Internal-only message signaling that further message-processing should be done */
-#define MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS                -0x6500  /**< A cryptographic operation is in progress. Try again later. */
+#define MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS                 -0x6500  /**< The asynchronous operation is not completed yet. */
+#define MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS                -0x6480  /**< A cryptographic operation is in progress. Try again later. */
 
 /*
  * Various constants
@@ -537,7 +538,6 @@
  */
 typedef int mbedtls_ssl_get_timer_t( void * ctx );
 
-
 /* Defined below */
 typedef struct mbedtls_ssl_session mbedtls_ssl_session;
 typedef struct mbedtls_ssl_context mbedtls_ssl_context;
@@ -554,6 +554,218 @@
 typedef struct mbedtls_ssl_flight_item mbedtls_ssl_flight_item;
 #endif
 
+#if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
+#if defined(MBEDTLS_X509_CRT_PARSE_C)
+/**
+ * \brief           Callback type: start external signature operation.
+ *
+ *                  This callback is called during an SSL handshake to start
+ *                  a signature decryption operation using an
+ *                  external processor. The parameter \p cert contains
+ *                  the public key; it is up to the callback function to
+ *                  determine how to access the associated private key.
+ *
+ *                  This function typically sends or enqueues a request, and
+ *                  does not wait for the operation to complete. This allows
+ *                  the handshake step to be non-blocking.
+ *
+ *                  The parameters \p ssl and \p cert are guaranteed to remain
+ *                  valid throughout the handshake. On the other hand, this
+ *                  function must save the contents of \p hash if the value
+ *                  is needed for later processing, because the \p hash buffer
+ *                  is no longer valid after this function returns.
+ *
+ *                  This function may call mbedtls_ssl_set_async_operation_data()
+ *                  to store an operation context for later retrieval
+ *                  by the resume or cancel callback.
+ *
+ * \note            For RSA signatures, this function must produce output
+ *                  that is consistent with PKCS#1 v1.5 in the same way as
+ *                  mbedtls_rsa_pkcs1_sign(). Before the private key operation,
+ *                  apply the padding steps described in RFC 8017, section 9.2
+ *                  "EMSA-PKCS1-v1_5" as follows.
+ *                  - If \p md_alg is #MBEDTLS_MD_NONE, apply the PKCS#1 v1.5
+ *                    encoding, treating \p hash as the DigestInfo to be
+ *                    padded. In other words, apply EMSA-PKCS1-v1_5 starting
+ *                    from step 3, with `T = hash` and `tLen = hash_len`.
+ *                  - If `md_alg != MBEDTLS_MD_NONE`, apply the PKCS#1 v1.5
+ *                    encoding, treating \p hash as the hash to be encoded and
+ *                    padded. In other words, apply EMSA-PKCS1-v1_5 starting
+ *                    from step 2, with `digestAlgorithm` obtained by calling
+ *                    mbedtls_oid_get_oid_by_md() on \p md_alg.
+ *
+ * \note            For ECDSA signatures, the output format is the DER encoding
+ *                  `Ecdsa-Sig-Value` defined in
+ *                  [RFC 4492 section 5.4](https://tools.ietf.org/html/rfc4492#section-5.4).
+ *
+ * \param ssl             The SSL connection instance. It should not be
+ *                        modified other than via
+ *                        mbedtls_ssl_set_async_operation_data().
+ * \param cert            Certificate containing the public key.
+ *                        In simple cases, this is one of the pointers passed to
+ *                        mbedtls_ssl_conf_own_cert() when configuring the SSL
+ *                        connection. However, if other callbacks are used, this
+ *                        property may not hold. For example, if an SNI callback
+ *                        is registered with mbedtls_ssl_conf_sni(), then
+ *                        this callback determines what certificate is used.
+ * \param md_alg          Hash algorithm.
+ * \param hash            Buffer containing the hash. This buffer is
+ *                        no longer valid when the function returns.
+ * \param hash_len        Size of the \c hash buffer in bytes.
+ *
+ * \return          0 if the operation was started successfully and the SSL
+ *                  stack should call the resume callback immediately.
+ * \return          #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if the operation
+ *                  was started successfully and the SSL stack should return
+ *                  immediately without calling the resume callback yet.
+ * \return          #MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH if the external
+ *                  processor does not support this key. The SSL stack will
+ *                  use the private key object instead.
+ * \return          Any other error indicates a fatal failure and is
+ *                  propagated up the call chain. The callback should
+ *                  use \c MBEDTLS_ERR_PK_xxx error codes, and <b>must not</b>
+ *                  use \c MBEDTLS_ERR_SSL_xxx error codes except as
+ *                  directed in the documentation of this callback.
+ */
+typedef int mbedtls_ssl_async_sign_t( mbedtls_ssl_context *ssl,
+                                      mbedtls_x509_crt *cert,
+                                      mbedtls_md_type_t md_alg,
+                                      const unsigned char *hash,
+                                      size_t hash_len );
+
+/**
+ * \brief           Callback type: start external decryption operation.
+ *
+ *                  This callback is called during an SSL handshake to start
+ *                  an RSA decryption operation using an
+ *                  external processor. The parameter \p cert contains
+ *                  the public key; it is up to the callback function to
+ *                  determine how to access the associated private key.
+ *
+ *                  This function typically sends or enqueues a request, and
+ *                  does not wait for the operation to complete. This allows
+ *                  the handshake step to be non-blocking.
+ *
+ *                  The parameters \p ssl and \p cert are guaranteed to remain
+ *                  valid throughout the handshake. On the other hand, this
+ *                  function must save the contents of \p input if the value
+ *                  is needed for later processing, because the \p input buffer
+ *                  is no longer valid after this function returns.
+ *
+ *                  This function may call mbedtls_ssl_set_async_operation_data()
+ *                  to store an operation context for later retrieval
+ *                  by the resume or cancel callback.
+ *
+ * \warning         RSA decryption as used in TLS is subject to a potential
+ *                  timing side channel attack first discovered by Bleichenbacher
+ *                  in 1998. This attack can be remotely exploitable
+ *                  in practice. To avoid this attack, you must ensure that
+ *                  if the callback performs an RSA decryption, the time it
+ *                  takes to execute and return the result does not depend
+ *                  on whether the RSA decryption succeeded or reported
+ *                  invalid padding.
+ *
+ * \param ssl             The SSL connection instance. It should not be
+ *                        modified other than via
+ *                        mbedtls_ssl_set_async_operation_data().
+ * \param cert            Certificate containing the public key.
+ *                        In simple cases, this is one of the pointers passed to
+ *                        mbedtls_ssl_conf_own_cert() when configuring the SSL
+ *                        connection. However, if other callbacks are used, this
+ *                        property may not hold. For example, if an SNI callback
+ *                        is registered with mbedtls_ssl_conf_sni(), then
+ *                        this callback determines what certificate is used.
+ * \param input           Buffer containing the input ciphertext. This buffer
+ *                        is no longer valid when the function returns.
+ * \param input_len       Size of the \p input buffer in bytes.
+ *
+ * \return          0 if the operation was started successfully and the SSL
+ *                  stack should call the resume callback immediately.
+ * \return          #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if the operation
+ *                  was started successfully and the SSL stack should return
+ *                  immediately without calling the resume callback yet.
+ * \return          #MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH if the external
+ *                  processor does not support this key. The SSL stack will
+ *                  use the private key object instead.
+ * \return          Any other error indicates a fatal failure and is
+ *                  propagated up the call chain. The callback should
+ *                  use \c MBEDTLS_ERR_PK_xxx error codes, and <b>must not</b>
+ *                  use \c MBEDTLS_ERR_SSL_xxx error codes except as
+ *                  directed in the documentation of this callback.
+ */
+typedef int mbedtls_ssl_async_decrypt_t( mbedtls_ssl_context *ssl,
+                                         mbedtls_x509_crt *cert,
+                                         const unsigned char *input,
+                                         size_t input_len );
+#endif /* MBEDTLS_X509_CRT_PARSE_C */
+
+/**
+ * \brief           Callback type: resume external operation.
+ *
+ *                  This callback is called during an SSL handshake to resume
+ *                  an external operation started by the
+ *                  ::mbedtls_ssl_async_sign_t or
+ *                  ::mbedtls_ssl_async_decrypt_t callback.
+ *
+ *                  This function typically checks the status of a pending
+ *                  request or causes the request queue to make progress, and
+ *                  does not wait for the operation to complete. This allows
+ *                  the handshake step to be non-blocking.
+ *
+ *                  This function may call mbedtls_ssl_get_async_operation_data()
+ *                  to retrieve an operation context set by the start callback.
+ *                  It may call mbedtls_ssl_set_async_operation_data() to modify
+ *                  this context.
+ *
+ *                  Note that when this function returns a status other than
+ *                  #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS, it must free any
+ *                  resources associated with the operation.
+ *
+ * \param ssl             The SSL connection instance. It should not be
+ *                        modified other than via
+ *                        mbedtls_ssl_set_async_operation_data().
+ * \param output          Buffer containing the output (signature or decrypted
+ *                        data) on success.
+ * \param output_len      On success, number of bytes written to \p output.
+ * \param output_size     Size of the \p output buffer in bytes.
+ *
+ * \return          0 if output of the operation is available in the
+ *                  \p output buffer.
+ * \return          #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if the operation
+ *                  is still in progress. Subsequent requests for progress
+ *                  on the SSL connection will call the resume callback
+ *                  again.
+ * \return          Any other error means that the operation is aborted.
+ *                  The SSL handshake is aborted. The callback should
+ *                  use \c MBEDTLS_ERR_PK_xxx error codes, and <b>must not</b>
+ *                  use \c MBEDTLS_ERR_SSL_xxx error codes except as
+ *                  directed in the documentation of this callback.
+ */
+typedef int mbedtls_ssl_async_resume_t( mbedtls_ssl_context *ssl,
+                                        unsigned char *output,
+                                        size_t *output_len,
+                                        size_t output_size );
+
+/**
+ * \brief           Callback type: cancel external operation.
+ *
+ *                  This callback is called if an SSL connection is closed
+ *                  while an asynchronous operation is in progress. Note that
+ *                  this callback is not called if the
+ *                  ::mbedtls_ssl_async_resume_t callback has run and has
+ *                  returned a value other than
+ *                  #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS, since in that case
+ *                  the asynchronous operation has already completed.
+ *
+ *                  This function may call mbedtls_ssl_get_async_operation_data()
+ *                  to retrieve an operation context set by the start callback.
+ *
+ * \param ssl             The SSL connection instance. It should not be
+ *                        modified.
+ */
+typedef void mbedtls_ssl_async_cancel_t( mbedtls_ssl_context *ssl );
+#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
+
 /*
  * This structure is used for storing current session data.
  */
@@ -670,6 +882,16 @@
     mbedtls_x509_crl *ca_crl;       /*!< trusted CAs CRLs                   */
 #endif /* MBEDTLS_X509_CRT_PARSE_C */
 
+#if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
+#if defined(MBEDTLS_X509_CRT_PARSE_C)
+    mbedtls_ssl_async_sign_t *f_async_sign_start; /*!< start asynchronous signature operation */
+    mbedtls_ssl_async_decrypt_t *f_async_decrypt_start; /*!< start asynchronous decryption operation */
+#endif /* MBEDTLS_X509_CRT_PARSE_C */
+    mbedtls_ssl_async_resume_t *f_async_resume; /*!< resume asynchronous operation */
+    mbedtls_ssl_async_cancel_t *f_async_cancel; /*!< cancel asynchronous operation */
+    void *p_async_config_data; /*!< Configuration data set by mbedtls_ssl_conf_async_private_cb(). */
+#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
+
 #if defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED)
     const int *sig_hashes;          /*!< allowed signature hashes           */
 #endif
@@ -1308,6 +1530,85 @@
         void *p_export_keys );
 #endif /* MBEDTLS_SSL_EXPORT_KEYS */
 
+#if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
+/**
+ * \brief           Configure asynchronous private key operation callbacks.
+ *
+ * \param conf              SSL configuration context
+ * \param f_async_sign      Callback to start a signature operation. See
+ *                          the description of ::mbedtls_ssl_async_sign_t
+ *                          for more information. This may be \c NULL if the
+ *                          external processor does not support any signature
+ *                          operation; in this case the private key object
+ *                          associated with the certificate will be used.
+ * \param f_async_decrypt   Callback to start a decryption operation. See
+ *                          the description of ::mbedtls_ssl_async_decrypt_t
+ *                          for more information. This may be \c NULL if the
+ *                          external processor does not support any decryption
+ *                          operation; in this case the private key object
+ *                          associated with the certificate will be used.
+ * \param f_async_resume    Callback to resume an asynchronous operation. See
+ *                          the description of ::mbedtls_ssl_async_resume_t
+ *                          for more information. This may not be \c NULL unless
+ *                          \p f_async_sign and \p f_async_decrypt are both
+ *                          \c NULL.
+ * \param f_async_cancel    Callback to cancel an asynchronous operation. See
+ *                          the description of ::mbedtls_ssl_async_cancel_t
+ *                          for more information. This may be \c NULL if
+ *                          no cleanup is needed.
+ * \param config_data       A pointer to configuration data which can be
+ *                          retrieved with
+ *                          mbedtls_ssl_conf_get_async_config_data(). The
+ *                          library stores this value without dereferencing it.
+ */
+void mbedtls_ssl_conf_async_private_cb( mbedtls_ssl_config *conf,
+                                        mbedtls_ssl_async_sign_t *f_async_sign,
+                                        mbedtls_ssl_async_decrypt_t *f_async_decrypt,
+                                        mbedtls_ssl_async_resume_t *f_async_resume,
+                                        mbedtls_ssl_async_cancel_t *f_async_cancel,
+                                        void *config_data );
+
+/**
+ * \brief           Retrieve the configuration data set by
+ *                  mbedtls_ssl_conf_async_private_cb().
+ *
+ * \param conf      SSL configuration context
+ * \return          The configuration data set by
+ *                  mbedtls_ssl_conf_async_private_cb().
+ */
+void *mbedtls_ssl_conf_get_async_config_data( const mbedtls_ssl_config *conf );
+
+/**
+ * \brief           Retrieve the asynchronous operation user context.
+ *
+ * \note            This function may only be called while a handshake
+ *                  is in progress.
+ *
+ * \param ssl       The SSL context to access.
+ *
+ * \return          The asynchronous operation user context that was last
+ *                  set during the current handshake. If
+ *                  mbedtls_ssl_set_async_operation_data() has not yet been
+ *                  called during the current handshake, this function returns
+ *                  \c NULL.
+ */
+void *mbedtls_ssl_get_async_operation_data( const mbedtls_ssl_context *ssl );
+
+/**
+ * \brief           Retrieve the asynchronous operation user context.
+ *
+ * \note            This function may only be called while a handshake
+ *                  is in progress.
+ *
+ * \param ssl       The SSL context to access.
+ * \param ctx       The new value of the asynchronous operation user context.
+ *                  Call mbedtls_ssl_get_async_operation_data() later during the
+ *                  same handshake to retrieve this value.
+ */
+void mbedtls_ssl_set_async_operation_data( mbedtls_ssl_context *ssl,
+                                 void *ctx );
+#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
+
 /**
  * \brief          Callback type: generate a cookie
  *
diff --git a/include/mbedtls/ssl_internal.h b/include/mbedtls/ssl_internal.h
index 6f8bebe..89fc88f 100644
--- a/include/mbedtls/ssl_internal.h
+++ b/include/mbedtls/ssl_internal.h
@@ -327,6 +327,19 @@
 #if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
     int extended_ms;                    /*!< use Extended Master Secret? */
 #endif
+
+#if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
+    unsigned int async_in_progress : 1; /*!< an asynchronous operation is in progress */
+#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
+
+#if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
+    /** Asynchronous operation context. This field is meant for use by the
+     * asynchronous operation callbacks (mbedtls_ssl_config::f_async_sign_start,
+     * mbedtls_ssl_config::f_async_decrypt_start,
+     * mbedtls_ssl_config::f_async_resume, mbedtls_ssl_config::f_async_cancel).
+     * The library does not use it internally. */
+    void *user_async_ctx;
+#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
 };
 
 /*
@@ -430,9 +443,9 @@
  * \brief           Free referenced items in an SSL handshake context and clear
  *                  memory
  *
- * \param handshake SSL handshake context
+ * \param ssl       SSL context
  */
-void mbedtls_ssl_handshake_free( mbedtls_ssl_handshake_params *handshake );
+void mbedtls_ssl_handshake_free( mbedtls_ssl_context *ssl );
 
 int mbedtls_ssl_handshake_client_step( mbedtls_ssl_context *ssl );
 int mbedtls_ssl_handshake_server_step( mbedtls_ssl_context *ssl );
@@ -650,7 +663,13 @@
     volatile unsigned char diff = 0;
 
     for( i = 0; i < n; i++ )
-        diff |= A[i] ^ B[i];
+    {
+        /* Read volatile data in order before computing diff.
+         * This avoids IAR compiler warning:
+         * 'the order of volatile accesses is undefined ..' */
+        unsigned char x = A[i], y = B[i];
+        diff |= x ^ y;
+    }
 
     return( diff );
 }
@@ -666,9 +685,9 @@
 #if defined(MBEDTLS_SSL_PROTO_TLS1) || defined(MBEDTLS_SSL_PROTO_TLS1_1) || \
     defined(MBEDTLS_SSL_PROTO_TLS1_2)
 int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl,
-                                        unsigned char *output,
-                                        unsigned char *data, size_t data_len,
-                                        mbedtls_md_type_t md_alg );
+                                            unsigned char *hash, size_t *hashlen,
+                                            unsigned char *data, size_t data_len,
+                                            mbedtls_md_type_t md_alg );
 #endif /* MBEDTLS_SSL_PROTO_TLS1 || MBEDTLS_SSL_PROTO_TLS1_1 || \
           MBEDTLS_SSL_PROTO_TLS1_2 */
 
diff --git a/include/mbedtls/version.h b/include/mbedtls/version.h
index 83e3c17..c8050b9 100644
--- a/include/mbedtls/version.h
+++ b/include/mbedtls/version.h
@@ -39,7 +39,7 @@
  * Major, Minor, Patchlevel
  */
 #define MBEDTLS_VERSION_MAJOR  2
-#define MBEDTLS_VERSION_MINOR  10
+#define MBEDTLS_VERSION_MINOR  11
 #define MBEDTLS_VERSION_PATCH  0
 
 /**
@@ -47,9 +47,9 @@
  *    MMNNPP00
  *    Major version | Minor version | Patch version
  */
-#define MBEDTLS_VERSION_NUMBER         0x020A0000
-#define MBEDTLS_VERSION_STRING         "2.10.0"
-#define MBEDTLS_VERSION_STRING_FULL    "mbed TLS 2.10.0"
+#define MBEDTLS_VERSION_NUMBER         0x020B0000
+#define MBEDTLS_VERSION_STRING         "2.11.0"
+#define MBEDTLS_VERSION_STRING_FULL    "mbed TLS 2.11.0"
 
 #if defined(MBEDTLS_VERSION_C)