diff --git a/include/psa/crypto.h b/include/psa/crypto.h
index 5be1b51..4669b2a 100644
--- a/include/psa/crypto.h
+++ b/include/psa/crypto.h
@@ -53,267 +53,22 @@
 extern "C" {
 #endif
 
-/** \defgroup basic Basic definitions
+#define PSA_BITS_TO_BYTES(bits) (((bits) + 7) / 8)
+#define PSA_BYTES_TO_BITS(bytes) ((bytes) * 8)
+
+/* The file "crypto_types.h" declares types that encode errors,
+ * algorithms, key types, policies, etc. */
+#include "crypto_types.h"
+
+/* The file "crypto_values.h" declares macros to build and analyze values
+ * of integral types defined in "crypto_types.h". */
+#include "crypto_values.h"
+
+/** \defgroup initialization Library initialization
  * @{
  */
 
 /**
- * \brief Function return status.
- *
- * This is either #PSA_SUCCESS (which is zero), indicating success,
- * or a nonzero value indicating that an error occurred. Errors are
- * encoded as one of the \c PSA_ERROR_xxx values defined here.
- */
-typedef int32_t psa_status_t;
-
-#if !defined(PSA_SUCCESS)
-/* If PSA_SUCCESS is defined, assume that PSA crypto is being used
- * together with PSA IPC, which also defines the identifier
- * PSA_SUCCESS. We must not define PSA_SUCCESS ourselves in that case;
- * the other error code names don't clash. This is a temporary hack
- * until we unify error reporting in PSA IPC and PSA crypto.
- *
- * Note that psa_defs.h must be included before this header!
- */
-/** The action was completed successfully. */
-#define PSA_SUCCESS ((psa_status_t)0)
-#endif /* !defined(PSA_SUCCESS) */
-
-/** An error occurred that does not correspond to any defined
- * failure cause.
- *
- * Implementations may use this error code if none of the other standard
- * error codes are applicable. */
-#define PSA_ERROR_UNKNOWN_ERROR         ((psa_status_t)1)
-
-/** The requested operation or a parameter is not supported
- * by this implementation.
- *
- * Implementations should return this error code when an enumeration
- * parameter such as a key type, algorithm, etc. is not recognized.
- * If a combination of parameters is recognized and identified as
- * not valid, return #PSA_ERROR_INVALID_ARGUMENT instead. */
-#define PSA_ERROR_NOT_SUPPORTED         ((psa_status_t)2)
-
-/** The requested action is denied by a policy.
- *
- * Implementations should return this error code when the parameters
- * are recognized as valid and supported, and a policy explicitly
- * denies the requested operation.
- *
- * If a subset of the parameters of a function call identify a
- * forbidden operation, and another subset of the parameters are
- * not valid or not supported, it is unspecified whether the function
- * returns #PSA_ERROR_NOT_PERMITTED, #PSA_ERROR_NOT_SUPPORTED or
- * #PSA_ERROR_INVALID_ARGUMENT. */
-#define PSA_ERROR_NOT_PERMITTED         ((psa_status_t)3)
-
-/** An output buffer is too small.
- *
- * Applications can call the \c PSA_xxx_SIZE macro listed in the function
- * description to determine a sufficient buffer size.
- *
- * Implementations should preferably return this error code only
- * in cases when performing the operation with a larger output
- * buffer would succeed. However implementations may return this
- * error if a function has invalid or unsupported parameters in addition
- * to the parameters that determine the necessary output buffer size. */
-#define PSA_ERROR_BUFFER_TOO_SMALL      ((psa_status_t)4)
-
-/** A slot is occupied, but must be empty to carry out the
- * requested action.
- *
- * If a handle is invalid, it does not designate an occupied slot.
- * The error for an invalid handle is #PSA_ERROR_INVALID_HANDLE.
- */
-#define PSA_ERROR_OCCUPIED_SLOT         ((psa_status_t)5)
-
-/** A slot is empty, but must be occupied to carry out the
- * requested action.
- *
- * If a handle is invalid, it does not designate an empty slot.
- * The error for an invalid handle is #PSA_ERROR_INVALID_HANDLE.
- */
-#define PSA_ERROR_EMPTY_SLOT            ((psa_status_t)6)
-
-/** The requested action cannot be performed in the current state.
- *
- * Multipart operations return this error when one of the
- * functions is called out of sequence. Refer to the function
- * descriptions for permitted sequencing of functions.
- *
- * Implementations shall not return this error code to indicate
- * that a key slot is occupied when it needs to be free or vice versa,
- * but shall return #PSA_ERROR_OCCUPIED_SLOT or #PSA_ERROR_EMPTY_SLOT
- * as applicable. */
-#define PSA_ERROR_BAD_STATE             ((psa_status_t)7)
-
-/** The parameters passed to the function are invalid.
- *
- * Implementations may return this error any time a parameter or
- * combination of parameters are recognized as invalid.
- *
- * Implementations shall not return this error code to indicate
- * that a key slot is occupied when it needs to be free or vice versa,
- * but shall return #PSA_ERROR_OCCUPIED_SLOT or #PSA_ERROR_EMPTY_SLOT
- * as applicable.
- *
- * Implementation shall not return this error code to indicate that a
- * key handle is invalid, but shall return #PSA_ERROR_INVALID_HANDLE
- * instead.
- */
-#define PSA_ERROR_INVALID_ARGUMENT      ((psa_status_t)8)
-
-/** There is not enough runtime memory.
- *
- * If the action is carried out across multiple security realms, this
- * error can refer to available memory in any of the security realms. */
-#define PSA_ERROR_INSUFFICIENT_MEMORY   ((psa_status_t)9)
-
-/** There is not enough persistent storage.
- *
- * Functions that modify the key storage return this error code if
- * there is insufficient storage space on the host media. In addition,
- * many functions that do not otherwise access storage may return this
- * error code if the implementation requires a mandatory log entry for
- * the requested action and the log storage space is full. */
-#define PSA_ERROR_INSUFFICIENT_STORAGE  ((psa_status_t)10)
-
-/** There was a communication failure inside the implementation.
- *
- * This can indicate a communication failure between the application
- * and an external cryptoprocessor or between the cryptoprocessor and
- * an external volatile or persistent memory. A communication failure
- * may be transient or permanent depending on the cause.
- *
- * \warning If a function returns this error, it is undetermined
- * whether the requested action has completed or not. Implementations
- * should return #PSA_SUCCESS on successful completion whenver
- * possible, however functions may return #PSA_ERROR_COMMUNICATION_FAILURE
- * if the requested action was completed successfully in an external
- * cryptoprocessor but there was a breakdown of communication before
- * the cryptoprocessor could report the status to the application.
- */
-#define PSA_ERROR_COMMUNICATION_FAILURE ((psa_status_t)11)
-
-/** There was a storage failure that may have led to data loss.
- *
- * This error indicates that some persistent storage is corrupted.
- * It should not be used for a corruption of volatile memory
- * (use #PSA_ERROR_TAMPERING_DETECTED), for a communication error
- * between the cryptoprocessor and its external storage (use
- * #PSA_ERROR_COMMUNICATION_FAILURE), or when the storage is
- * in a valid state but is full (use #PSA_ERROR_INSUFFICIENT_STORAGE).
- *
- * Note that a storage failure does not indicate that any data that was
- * previously read is invalid. However this previously read data may no
- * longer be readable from storage.
- *
- * When a storage failure occurs, it is no longer possible to ensure
- * the global integrity of the keystore. Depending on the global
- * integrity guarantees offered by the implementation, access to other
- * data may or may not fail even if the data is still readable but
- * its integrity canont be guaranteed.
- *
- * Implementations should only use this error code to report a
- * permanent storage corruption. However application writers should
- * keep in mind that transient errors while reading the storage may be
- * reported using this error code. */
-#define PSA_ERROR_STORAGE_FAILURE       ((psa_status_t)12)
-
-/** A hardware failure was detected.
- *
- * A hardware failure may be transient or permanent depending on the
- * cause. */
-#define PSA_ERROR_HARDWARE_FAILURE      ((psa_status_t)13)
-
-/** A tampering attempt was detected.
- *
- * If an application receives this error code, there is no guarantee
- * that previously accessed or computed data was correct and remains
- * confidential. Applications should not perform any security function
- * and should enter a safe failure state.
- *
- * Implementations may return this error code if they detect an invalid
- * state that cannot happen during normal operation and that indicates
- * that the implementation's security guarantees no longer hold. Depending
- * on the implementation architecture and on its security and safety goals,
- * the implementation may forcibly terminate the application.
- *
- * This error code is intended as a last resort when a security breach
- * is detected and it is unsure whether the keystore data is still
- * protected. Implementations shall only return this error code
- * to report an alarm from a tampering detector, to indicate that
- * the confidentiality of stored data can no longer be guaranteed,
- * or to indicate that the integrity of previously returned data is now
- * considered compromised. Implementations shall not use this error code
- * to indicate a hardware failure that merely makes it impossible to
- * perform the requested operation (use #PSA_ERROR_COMMUNICATION_FAILURE,
- * #PSA_ERROR_STORAGE_FAILURE, #PSA_ERROR_HARDWARE_FAILURE,
- * #PSA_ERROR_INSUFFICIENT_ENTROPY or other applicable error code
- * instead).
- *
- * This error indicates an attack against the application. Implementations
- * shall not return this error code as a consequence of the behavior of
- * the application itself. */
-#define PSA_ERROR_TAMPERING_DETECTED    ((psa_status_t)14)
-
-/** There is not enough entropy to generate random data needed
- * for the requested action.
- *
- * This error indicates a failure of a hardware random generator.
- * Application writers should note that this error can be returned not
- * only by functions whose purpose is to generate random data, such
- * as key, IV or nonce generation, but also by functions that execute
- * an algorithm with a randomized result, as well as functions that
- * use randomization of intermediate computations as a countermeasure
- * to certain attacks.
- *
- * Implementations should avoid returning this error after psa_crypto_init()
- * has succeeded. Implementations should generate sufficient
- * entropy during initialization and subsequently use a cryptographically
- * secure pseudorandom generator (PRNG). However implementations may return
- * this error at any time if a policy requires the PRNG to be reseeded
- * during normal operation. */
-#define PSA_ERROR_INSUFFICIENT_ENTROPY  ((psa_status_t)15)
-
-/** The signature, MAC or hash is incorrect.
- *
- * Verification functions return this error if the verification
- * calculations completed successfully, and the value to be verified
- * was determined to be incorrect.
- *
- * If the value to verify has an invalid size, implementations may return
- * either #PSA_ERROR_INVALID_ARGUMENT or #PSA_ERROR_INVALID_SIGNATURE. */
-#define PSA_ERROR_INVALID_SIGNATURE     ((psa_status_t)16)
-
-/** The decrypted padding is incorrect.
- *
- * \warning In some protocols, when decrypting data, it is essential that
- * the behavior of the application does not depend on whether the padding
- * is correct, down to precise timing. Applications should prefer
- * protocols that use authenticated encryption rather than plain
- * encryption. If the application must perform a decryption of
- * unauthenticated data, the application writer should take care not
- * to reveal whether the padding is invalid.
- *
- * Implementations should strive to make valid and invalid padding
- * as close as possible to indistinguishable to an external observer.
- * In particular, the timing of a decryption operation should not
- * depend on the validity of the padding. */
-#define PSA_ERROR_INVALID_PADDING       ((psa_status_t)17)
-
-/** The generator has insufficient capacity left.
- *
- * Once a function returns this error, attempts to read from the
- * generator will always return this error. */
-#define PSA_ERROR_INSUFFICIENT_CAPACITY ((psa_status_t)18)
-
-/** The key handle is not valid.
- */
-#define PSA_ERROR_INVALID_HANDLE        ((psa_status_t)19)
-
-/**
  * \brief Library initialization.
  *
  * Applications must call this function before calling any other
@@ -339,1094 +94,12 @@
  */
 psa_status_t psa_crypto_init(void);
 
-#define PSA_BITS_TO_BYTES(bits) (((bits) + 7) / 8)
-#define PSA_BYTES_TO_BITS(bytes) ((bytes) * 8)
-
-/**@}*/
-
-/** \defgroup crypto_types Key and algorithm types
- * @{
- */
-
-/** \brief Encoding of a key type.
- */
-typedef uint32_t psa_key_type_t;
-
-/** An invalid key type value.
- *
- * Zero is not the encoding of any key type.
- */
-#define PSA_KEY_TYPE_NONE                       ((psa_key_type_t)0x00000000)
-
-/** Vendor-defined flag
- *
- * Key types defined by this standard will never have the
- * #PSA_KEY_TYPE_VENDOR_FLAG bit set. Vendors who define additional key types
- * must use an encoding with the #PSA_KEY_TYPE_VENDOR_FLAG bit set and should
- * respect the bitwise structure used by standard encodings whenever practical.
- */
-#define PSA_KEY_TYPE_VENDOR_FLAG                ((psa_key_type_t)0x80000000)
-
-#define PSA_KEY_TYPE_CATEGORY_MASK              ((psa_key_type_t)0x70000000)
-#define PSA_KEY_TYPE_CATEGORY_SYMMETRIC         ((psa_key_type_t)0x40000000)
-#define PSA_KEY_TYPE_CATEGORY_RAW               ((psa_key_type_t)0x50000000)
-#define PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY        ((psa_key_type_t)0x60000000)
-#define PSA_KEY_TYPE_CATEGORY_KEY_PAIR          ((psa_key_type_t)0x70000000)
-
-#define PSA_KEY_TYPE_CATEGORY_FLAG_PAIR         ((psa_key_type_t)0x10000000)
-
-/** Whether a key type is vendor-defined. */
-#define PSA_KEY_TYPE_IS_VENDOR_DEFINED(type) \
-    (((type) & PSA_KEY_TYPE_VENDOR_FLAG) != 0)
-
-/** Whether a key type is an unstructured array of bytes.
- *
- * This encompasses both symmetric keys and non-key data.
- */
-#define PSA_KEY_TYPE_IS_UNSTRUCTURED(type) \
-    (((type) & PSA_KEY_TYPE_CATEGORY_MASK & ~(psa_key_type_t)0x10000000) == \
-     PSA_KEY_TYPE_CATEGORY_SYMMETRIC)
-
-/** Whether a key type is asymmetric: either a key pair or a public key. */
-#define PSA_KEY_TYPE_IS_ASYMMETRIC(type)                                \
-    (((type) & PSA_KEY_TYPE_CATEGORY_MASK                               \
-      & ~PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) ==                            \
-     PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY)
-/** Whether a key type is the public part of a key pair. */
-#define PSA_KEY_TYPE_IS_PUBLIC_KEY(type)                                \
-    (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY)
-/** Whether a key type is a key pair containing a private part and a public
- * part. */
-#define PSA_KEY_TYPE_IS_KEYPAIR(type)                                   \
-    (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_KEY_PAIR)
-/** The key pair type corresponding to a public key type.
- *
- * You may also pass a key pair type as \p type, it will be left unchanged.
- *
- * \param type      A public key type or key pair type.
- *
- * \return          The corresponding key pair type.
- *                  If \p type is not a public key or a key pair,
- *                  the return value is undefined.
- */
-#define PSA_KEY_TYPE_KEYPAIR_OF_PUBLIC_KEY(type)        \
-    ((type) | PSA_KEY_TYPE_CATEGORY_FLAG_PAIR)
-/** The public key type corresponding to a key pair type.
- *
- * You may also pass a key pair type as \p type, it will be left unchanged.
- *
- * \param type      A public key type or key pair type.
- *
- * \return          The corresponding public key type.
- *                  If \p type is not a public key or a key pair,
- *                  the return value is undefined.
- */
-#define PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type)        \
-    ((type) & ~PSA_KEY_TYPE_CATEGORY_FLAG_PAIR)
-
-/** Raw data.
- *
- * A "key" of this type cannot be used for any cryptographic operation.
- * Applications may use this type to store arbitrary data in the keystore. */
-#define PSA_KEY_TYPE_RAW_DATA                   ((psa_key_type_t)0x50000001)
-
-/** HMAC key.
- *
- * The key policy determines which underlying hash algorithm the key can be
- * used for.
- *
- * HMAC keys should generally have the same size as the underlying hash.
- * This size can be calculated with #PSA_HASH_SIZE(\c alg) where
- * \c alg is the HMAC algorithm or the underlying hash algorithm. */
-#define PSA_KEY_TYPE_HMAC                       ((psa_key_type_t)0x51000000)
-
-/** A secret for key derivation.
- *
- * The key policy determines which key derivation algorithm the key
- * can be used for.
- */
-#define PSA_KEY_TYPE_DERIVE                     ((psa_key_type_t)0x52000000)
-
-/** Key for an cipher, AEAD or MAC algorithm based on the AES block cipher.
- *
- * The size of the key can be 16 bytes (AES-128), 24 bytes (AES-192) or
- * 32 bytes (AES-256).
- */
-#define PSA_KEY_TYPE_AES                        ((psa_key_type_t)0x40000001)
-
-/** Key for a cipher or MAC algorithm based on DES or 3DES (Triple-DES).
- *
- * The size of the key can be 8 bytes (single DES), 16 bytes (2-key 3DES) or
- * 24 bytes (3-key 3DES).
- *
- * Note that single DES and 2-key 3DES are weak and strongly
- * deprecated and should only be used to decrypt legacy data. 3-key 3DES
- * is weak and deprecated and should only be used in legacy protocols.
- */
-#define PSA_KEY_TYPE_DES                        ((psa_key_type_t)0x40000002)
-
-/** Key for an cipher, AEAD or MAC algorithm based on the
- * Camellia block cipher. */
-#define PSA_KEY_TYPE_CAMELLIA                   ((psa_key_type_t)0x40000003)
-
-/** Key for the RC4 stream cipher.
- *
- * Note that RC4 is weak and deprecated and should only be used in
- * legacy protocols. */
-#define PSA_KEY_TYPE_ARC4                       ((psa_key_type_t)0x40000004)
-
-/** RSA public key. */
-#define PSA_KEY_TYPE_RSA_PUBLIC_KEY             ((psa_key_type_t)0x60010000)
-/** RSA key pair (private and public key). */
-#define PSA_KEY_TYPE_RSA_KEYPAIR                ((psa_key_type_t)0x70010000)
-/** Whether a key type is an RSA key (pair or public-only). */
-#define PSA_KEY_TYPE_IS_RSA(type)                                       \
-    (PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type) == PSA_KEY_TYPE_RSA_PUBLIC_KEY)
-
-/** DSA public key. */
-#define PSA_KEY_TYPE_DSA_PUBLIC_KEY             ((psa_key_type_t)0x60020000)
-/** DSA key pair (private and public key). */
-#define PSA_KEY_TYPE_DSA_KEYPAIR                ((psa_key_type_t)0x70020000)
-/** Whether a key type is an DSA key (pair or public-only). */
-#define PSA_KEY_TYPE_IS_DSA(type)                                       \
-    (PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type) == PSA_KEY_TYPE_DSA_PUBLIC_KEY)
-
-#define PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE        ((psa_key_type_t)0x60030000)
-#define PSA_KEY_TYPE_ECC_KEYPAIR_BASE           ((psa_key_type_t)0x70030000)
-#define PSA_KEY_TYPE_ECC_CURVE_MASK             ((psa_key_type_t)0x0000ffff)
-/** Elliptic curve key pair. */
-#define PSA_KEY_TYPE_ECC_KEYPAIR(curve)         \
-    (PSA_KEY_TYPE_ECC_KEYPAIR_BASE | (curve))
-/** Elliptic curve public key. */
-#define PSA_KEY_TYPE_ECC_PUBLIC_KEY(curve)              \
-    (PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE | (curve))
-
-/** Whether a key type is an elliptic curve key (pair or public-only). */
-#define PSA_KEY_TYPE_IS_ECC(type)                                       \
-    ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type) &                        \
-      ~PSA_KEY_TYPE_ECC_CURVE_MASK) == PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE)
-#define PSA_KEY_TYPE_IS_ECC_KEYPAIR(type)                               \
-    (((type) & ~PSA_KEY_TYPE_ECC_CURVE_MASK) ==                         \
-     PSA_KEY_TYPE_ECC_KEYPAIR_BASE)
-#define PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY(type)                            \
-    (((type) & ~PSA_KEY_TYPE_ECC_CURVE_MASK) ==                         \
-     PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE)
-
-/** The type of PSA elliptic curve identifiers. */
-typedef uint16_t psa_ecc_curve_t;
-/** Extract the curve from an elliptic curve key type. */
-#define PSA_KEY_TYPE_GET_CURVE(type)                             \
-    ((psa_ecc_curve_t) (PSA_KEY_TYPE_IS_ECC(type) ?              \
-                        ((type) & PSA_KEY_TYPE_ECC_CURVE_MASK) : \
-                        0))
-
-/* The encoding of curve identifiers is currently aligned with the
- * TLS Supported Groups Registry (formerly known as the
- * TLS EC Named Curve Registry)
- * https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-parameters-8
- * The values are defined by RFC 8422 and RFC 7027. */
-#define PSA_ECC_CURVE_SECT163K1         ((psa_ecc_curve_t) 0x0001)
-#define PSA_ECC_CURVE_SECT163R1         ((psa_ecc_curve_t) 0x0002)
-#define PSA_ECC_CURVE_SECT163R2         ((psa_ecc_curve_t) 0x0003)
-#define PSA_ECC_CURVE_SECT193R1         ((psa_ecc_curve_t) 0x0004)
-#define PSA_ECC_CURVE_SECT193R2         ((psa_ecc_curve_t) 0x0005)
-#define PSA_ECC_CURVE_SECT233K1         ((psa_ecc_curve_t) 0x0006)
-#define PSA_ECC_CURVE_SECT233R1         ((psa_ecc_curve_t) 0x0007)
-#define PSA_ECC_CURVE_SECT239K1         ((psa_ecc_curve_t) 0x0008)
-#define PSA_ECC_CURVE_SECT283K1         ((psa_ecc_curve_t) 0x0009)
-#define PSA_ECC_CURVE_SECT283R1         ((psa_ecc_curve_t) 0x000a)
-#define PSA_ECC_CURVE_SECT409K1         ((psa_ecc_curve_t) 0x000b)
-#define PSA_ECC_CURVE_SECT409R1         ((psa_ecc_curve_t) 0x000c)
-#define PSA_ECC_CURVE_SECT571K1         ((psa_ecc_curve_t) 0x000d)
-#define PSA_ECC_CURVE_SECT571R1         ((psa_ecc_curve_t) 0x000e)
-#define PSA_ECC_CURVE_SECP160K1         ((psa_ecc_curve_t) 0x000f)
-#define PSA_ECC_CURVE_SECP160R1         ((psa_ecc_curve_t) 0x0010)
-#define PSA_ECC_CURVE_SECP160R2         ((psa_ecc_curve_t) 0x0011)
-#define PSA_ECC_CURVE_SECP192K1         ((psa_ecc_curve_t) 0x0012)
-#define PSA_ECC_CURVE_SECP192R1         ((psa_ecc_curve_t) 0x0013)
-#define PSA_ECC_CURVE_SECP224K1         ((psa_ecc_curve_t) 0x0014)
-#define PSA_ECC_CURVE_SECP224R1         ((psa_ecc_curve_t) 0x0015)
-#define PSA_ECC_CURVE_SECP256K1         ((psa_ecc_curve_t) 0x0016)
-#define PSA_ECC_CURVE_SECP256R1         ((psa_ecc_curve_t) 0x0017)
-#define PSA_ECC_CURVE_SECP384R1         ((psa_ecc_curve_t) 0x0018)
-#define PSA_ECC_CURVE_SECP521R1         ((psa_ecc_curve_t) 0x0019)
-#define PSA_ECC_CURVE_BRAINPOOL_P256R1  ((psa_ecc_curve_t) 0x001a)
-#define PSA_ECC_CURVE_BRAINPOOL_P384R1  ((psa_ecc_curve_t) 0x001b)
-#define PSA_ECC_CURVE_BRAINPOOL_P512R1  ((psa_ecc_curve_t) 0x001c)
-#define PSA_ECC_CURVE_CURVE25519        ((psa_ecc_curve_t) 0x001d)
-#define PSA_ECC_CURVE_CURVE448          ((psa_ecc_curve_t) 0x001e)
-
-/** The block size of a block cipher.
- *
- * \param type  A cipher key type (value of type #psa_key_type_t).
- *
- * \return      The block size for a block cipher, or 1 for a stream cipher.
- *              The return value is undefined if \p type is not a supported
- *              cipher key type.
- *
- * \note It is possible to build stream cipher algorithms on top of a block
- *       cipher, for example CTR mode (#PSA_ALG_CTR).
- *       This macro only takes the key type into account, so it cannot be
- *       used to determine the size of the data that #psa_cipher_update()
- *       might buffer for future processing in general.
- *
- * \note This macro returns a compile-time constant if its argument is one.
- *
- * \warning This macro may evaluate its argument multiple times.
- */
-#define PSA_BLOCK_CIPHER_BLOCK_SIZE(type)            \
-    (                                                \
-        (type) == PSA_KEY_TYPE_AES ? 16 :            \
-        (type) == PSA_KEY_TYPE_DES ? 8 :             \
-        (type) == PSA_KEY_TYPE_CAMELLIA ? 16 :       \
-        (type) == PSA_KEY_TYPE_ARC4 ? 1 :            \
-        0)
-
-/** \brief Encoding of a cryptographic algorithm.
- *
- * For algorithms that can be applied to multiple key types, this type
- * does not encode the key type. For example, for symmetric ciphers
- * based on a block cipher, #psa_algorithm_t encodes the block cipher
- * mode and the padding mode while the block cipher itself is encoded
- * via #psa_key_type_t.
- */
-typedef uint32_t psa_algorithm_t;
-
-#define PSA_ALG_VENDOR_FLAG                     ((psa_algorithm_t)0x80000000)
-#define PSA_ALG_CATEGORY_MASK                   ((psa_algorithm_t)0x7f000000)
-#define PSA_ALG_CATEGORY_HASH                   ((psa_algorithm_t)0x01000000)
-#define PSA_ALG_CATEGORY_MAC                    ((psa_algorithm_t)0x02000000)
-#define PSA_ALG_CATEGORY_CIPHER                 ((psa_algorithm_t)0x04000000)
-#define PSA_ALG_CATEGORY_AEAD                   ((psa_algorithm_t)0x06000000)
-#define PSA_ALG_CATEGORY_SIGN                   ((psa_algorithm_t)0x10000000)
-#define PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION  ((psa_algorithm_t)0x12000000)
-#define PSA_ALG_CATEGORY_KEY_AGREEMENT          ((psa_algorithm_t)0x22000000)
-#define PSA_ALG_CATEGORY_KEY_DERIVATION         ((psa_algorithm_t)0x30000000)
-#define PSA_ALG_CATEGORY_KEY_SELECTION          ((psa_algorithm_t)0x31000000)
-
-#define PSA_ALG_IS_VENDOR_DEFINED(alg)                                  \
-    (((alg) & PSA_ALG_VENDOR_FLAG) != 0)
-
-/** Whether the specified algorithm is a hash algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is a hash algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_HASH(alg)                                            \
-    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_HASH)
-
-/** Whether the specified algorithm is a MAC algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is a MAC algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_MAC(alg)                                             \
-    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_MAC)
-
-/** Whether the specified algorithm is a symmetric cipher algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is a symmetric cipher algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_CIPHER(alg)                                          \
-    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_CIPHER)
-
-/** Whether the specified algorithm is an authenticated encryption
- * with associated data (AEAD) algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is an AEAD algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_AEAD(alg)                                            \
-    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_AEAD)
-
-/** Whether the specified algorithm is a public-key signature algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is a public-key signature algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_SIGN(alg)                                            \
-    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_SIGN)
-
-/** Whether the specified algorithm is a public-key encryption algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is a public-key encryption algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_ASYMMETRIC_ENCRYPTION(alg)                           \
-    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION)
-
-#define PSA_ALG_KEY_SELECTION_FLAG              ((psa_algorithm_t)0x01000000)
-/** Whether the specified algorithm is a key agreement algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is a key agreement algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_KEY_AGREEMENT(alg)                                   \
-    (((alg) & PSA_ALG_CATEGORY_MASK & ~PSA_ALG_KEY_SELECTION_FLAG) ==   \
-     PSA_ALG_CATEGORY_KEY_AGREEMENT)
-
-/** Whether the specified algorithm is a key derivation algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is a key derivation algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_KEY_DERIVATION(alg)                                  \
-    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_DERIVATION)
-
-/** Whether the specified algorithm is a key selection algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is a key selection algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_KEY_SELECTION(alg)                                   \
-    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_SELECTION)
-
-#define PSA_ALG_HASH_MASK                       ((psa_algorithm_t)0x000000ff)
-#define PSA_ALG_MD2                             ((psa_algorithm_t)0x01000001)
-#define PSA_ALG_MD4                             ((psa_algorithm_t)0x01000002)
-#define PSA_ALG_MD5                             ((psa_algorithm_t)0x01000003)
-#define PSA_ALG_RIPEMD160                       ((psa_algorithm_t)0x01000004)
-#define PSA_ALG_SHA_1                           ((psa_algorithm_t)0x01000005)
-/** SHA2-224 */
-#define PSA_ALG_SHA_224                         ((psa_algorithm_t)0x01000008)
-/** SHA2-256 */
-#define PSA_ALG_SHA_256                         ((psa_algorithm_t)0x01000009)
-/** SHA2-384 */
-#define PSA_ALG_SHA_384                         ((psa_algorithm_t)0x0100000a)
-/** SHA2-512 */
-#define PSA_ALG_SHA_512                         ((psa_algorithm_t)0x0100000b)
-/** SHA2-512/224 */
-#define PSA_ALG_SHA_512_224                     ((psa_algorithm_t)0x0100000c)
-/** SHA2-512/256 */
-#define PSA_ALG_SHA_512_256                     ((psa_algorithm_t)0x0100000d)
-/** SHA3-224 */
-#define PSA_ALG_SHA3_224                        ((psa_algorithm_t)0x01000010)
-/** SHA3-256 */
-#define PSA_ALG_SHA3_256                        ((psa_algorithm_t)0x01000011)
-/** SHA3-384 */
-#define PSA_ALG_SHA3_384                        ((psa_algorithm_t)0x01000012)
-/** SHA3-512 */
-#define PSA_ALG_SHA3_512                        ((psa_algorithm_t)0x01000013)
-
-#define PSA_ALG_MAC_SUBCATEGORY_MASK            ((psa_algorithm_t)0x00c00000)
-#define PSA_ALG_HMAC_BASE                       ((psa_algorithm_t)0x02800000)
-/** Macro to build an HMAC algorithm.
- *
- * For example, #PSA_ALG_HMAC(#PSA_ALG_SHA_256) is HMAC-SHA-256.
- *
- * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
- *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
- *
- * \return              The corresponding HMAC algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      hash algorithm.
- */
-#define PSA_ALG_HMAC(hash_alg)                                  \
-    (PSA_ALG_HMAC_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-
-#define PSA_ALG_HMAC_GET_HASH(hmac_alg)                             \
-    (PSA_ALG_CATEGORY_HASH | ((hmac_alg) & PSA_ALG_HASH_MASK))
-
-/** Whether the specified algorithm is an HMAC algorithm.
- *
- * HMAC is a family of MAC algorithms that are based on a hash function.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is an HMAC algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_HMAC(alg)                                            \
-    (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \
-     PSA_ALG_HMAC_BASE)
-
-/* In the encoding of a MAC algorithm, the bits corresponding to
- * PSA_ALG_MAC_TRUNCATION_MASK encode the length to which the MAC is
- * truncated. As an exception, the value 0 means the untruncated algorithm,
- * whatever its length is. The length is encoded in 6 bits, so it can
- * reach up to 63; the largest MAC is 64 bytes so its trivial truncation
- * to full length is correctly encoded as 0 and any non-trivial truncation
- * is correctly encoded as a value between 1 and 63. */
-#define PSA_ALG_MAC_TRUNCATION_MASK             ((psa_algorithm_t)0x00003f00)
-#define PSA_MAC_TRUNCATION_OFFSET 8
-
-/** Macro to build a truncated MAC algorithm.
- *
- * A truncated MAC algorithm is identical to the corresponding MAC
- * algorithm except that the MAC value for the truncated algorithm
- * consists of only the first \p mac_length bytes of the MAC value
- * for the untruncated algorithm.
- *
- * \note    This macro may allow constructing algorithm identifiers that
- *          are not valid, either because the specified length is larger
- *          than the untruncated MAC or because the specified length is
- *          smaller than permitted by the implementation.
- *
- * \note    It is implementation-defined whether a truncated MAC that
- *          is truncated to the same length as the MAC of the untruncated
- *          algorithm is considered identical to the untruncated algorithm
- *          for policy comparison purposes.
- *
- * \param alg           A MAC algorithm identifier (value of type
- *                      #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p alg)
- *                      is true). This may be a truncated or untruncated
- *                      MAC algorithm.
- * \param mac_length    Desired length of the truncated MAC in bytes.
- *                      This must be at most the full length of the MAC
- *                      and must be at least an implementation-specified
- *                      minimum. The implementation-specified minimum
- *                      shall not be zero.
- *
- * \return              The corresponding MAC algorithm with the specified
- *                      length.
- * \return              Unspecified if \p alg is not a supported
- *                      MAC algorithm or if \p mac_length is too small or
- *                      too large for the specified MAC algorithm.
- */
-#define PSA_ALG_TRUNCATED_MAC(alg, mac_length)                          \
-    (((alg) & ~PSA_ALG_MAC_TRUNCATION_MASK) |                           \
-     ((mac_length) << PSA_MAC_TRUNCATION_OFFSET & PSA_ALG_MAC_TRUNCATION_MASK))
-
-/** Macro to build the base MAC algorithm corresponding to a truncated
- * MAC algorithm.
- *
- * \param alg           A MAC algorithm identifier (value of type
- *                      #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p alg)
- *                      is true). This may be a truncated or untruncated
- *                      MAC algorithm.
- *
- * \return              The corresponding base MAC algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      MAC algorithm.
- */
-#define PSA_ALG_FULL_LENGTH_MAC(alg)            \
-    ((alg) & ~PSA_ALG_MAC_TRUNCATION_MASK)
-
-/** Length to which a MAC algorithm is truncated.
- *
- * \param alg           A MAC algorithm identifier (value of type
- *                      #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p alg)
- *                      is true).
- *
- * \return              Length of the truncated MAC in bytes.
- * \return              0 if \p alg is a non-truncated MAC algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      MAC algorithm.
- */
-#define PSA_MAC_TRUNCATED_LENGTH(alg)           \
-    (((alg) & PSA_ALG_MAC_TRUNCATION_MASK) >> PSA_MAC_TRUNCATION_OFFSET)
-
-#define PSA_ALG_CIPHER_MAC_BASE                 ((psa_algorithm_t)0x02c00000)
-#define PSA_ALG_CBC_MAC                         ((psa_algorithm_t)0x02c00001)
-#define PSA_ALG_CMAC                            ((psa_algorithm_t)0x02c00002)
-#define PSA_ALG_GMAC                            ((psa_algorithm_t)0x02c00003)
-
-/** Whether the specified algorithm is a MAC algorithm based on a block cipher.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is a MAC algorithm based on a block cipher, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier.
- */
-#define PSA_ALG_IS_BLOCK_CIPHER_MAC(alg)                                \
-    (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \
-     PSA_ALG_CIPHER_MAC_BASE)
-
-#define PSA_ALG_CIPHER_STREAM_FLAG              ((psa_algorithm_t)0x00800000)
-#define PSA_ALG_CIPHER_FROM_BLOCK_FLAG          ((psa_algorithm_t)0x00400000)
-
-/** Whether the specified algorithm is a stream cipher.
- *
- * A stream cipher is a symmetric cipher that encrypts or decrypts messages
- * by applying a bitwise-xor with a stream of bytes that is generated
- * from a key.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \p alg is a stream cipher algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \p alg is not a supported
- *         algorithm identifier or if it is not a symmetric cipher algorithm.
- */
-#define PSA_ALG_IS_STREAM_CIPHER(alg)            \
-    (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_CIPHER_STREAM_FLAG)) == \
-        (PSA_ALG_CATEGORY_CIPHER | PSA_ALG_CIPHER_STREAM_FLAG))
-
-/** The ARC4 stream cipher algorithm.
- */
-#define PSA_ALG_ARC4                            ((psa_algorithm_t)0x04800001)
-
-/** The CTR stream cipher mode.
- *
- * CTR is a stream cipher which is built from a block cipher.
- * The underlying block cipher is determined by the key type.
- * For example, to use AES-128-CTR, use this algorithm with
- * a key of type #PSA_KEY_TYPE_AES and a length of 128 bits (16 bytes).
- */
-#define PSA_ALG_CTR                             ((psa_algorithm_t)0x04c00001)
-
-#define PSA_ALG_CFB                             ((psa_algorithm_t)0x04c00002)
-
-#define PSA_ALG_OFB                             ((psa_algorithm_t)0x04c00003)
-
-/** The XTS cipher mode.
- *
- * XTS is a cipher mode which is built from a block cipher. It requires at
- * least one full block of input, but beyond this minimum the input
- * does not need to be a whole number of blocks.
- */
-#define PSA_ALG_XTS                             ((psa_algorithm_t)0x044000ff)
-
-/** The CBC block cipher chaining mode, with no padding.
- *
- * The underlying block cipher is determined by the key type.
- *
- * This symmetric cipher mode can only be used with messages whose lengths
- * are whole number of blocks for the chosen block cipher.
- */
-#define PSA_ALG_CBC_NO_PADDING                  ((psa_algorithm_t)0x04600100)
-
-/** The CBC block cipher chaining mode with PKCS#7 padding.
- *
- * The underlying block cipher is determined by the key type.
- *
- * This is the padding method defined by PKCS#7 (RFC 2315) &sect;10.3.
- */
-#define PSA_ALG_CBC_PKCS7                       ((psa_algorithm_t)0x04600101)
-
-#define PSA_ALG_CCM                             ((psa_algorithm_t)0x06001001)
-#define PSA_ALG_GCM                             ((psa_algorithm_t)0x06001002)
-
-/* In the encoding of a AEAD algorithm, the bits corresponding to
- * PSA_ALG_AEAD_TAG_LENGTH_MASK encode the length of the AEAD tag.
- * The constants for default lengths follow this encoding.
- */
-#define PSA_ALG_AEAD_TAG_LENGTH_MASK            ((psa_algorithm_t)0x00003f00)
-#define PSA_AEAD_TAG_LENGTH_OFFSET 8
-
-/** Macro to build a shortened AEAD algorithm.
- *
- * A shortened AEAD algorithm is similar to the corresponding AEAD
- * algorithm, but has an authentication tag that consists of fewer bytes.
- * Depending on the algorithm, the tag length may affect the calculation
- * of the ciphertext.
- *
- * \param alg           A AEAD algorithm identifier (value of type
- *                      #psa_algorithm_t such that #PSA_ALG_IS_AEAD(\p alg)
- *                      is true).
- * \param tag_length    Desired length of the authentication tag in bytes.
- *
- * \return              The corresponding AEAD algorithm with the specified
- *                      length.
- * \return              Unspecified if \p alg is not a supported
- *                      AEAD algorithm or if \p tag_length is not valid
- *                      for the specified AEAD algorithm.
- */
-#define PSA_ALG_AEAD_WITH_TAG_LENGTH(alg, tag_length)                   \
-    (((alg) & ~PSA_ALG_AEAD_TAG_LENGTH_MASK) |                          \
-     ((tag_length) << PSA_AEAD_TAG_LENGTH_OFFSET &                      \
-      PSA_ALG_AEAD_TAG_LENGTH_MASK))
-
-/** Calculate the corresponding AEAD algorithm with the default tag length.
- *
- * \param alg   An AEAD algorithm (\c PSA_ALG_XXX value such that
- *              #PSA_ALG_IS_AEAD(\p alg) is true).
- *
- * \return      The corresponding AEAD algorithm with the default tag length
- *              for that algorithm.
- */
-#define PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH(alg)                       \
-    (                                                                   \
-        PSA__ALG_AEAD_WITH_DEFAULT_TAG_LENGTH__CASE(alg, PSA_ALG_CCM)   \
-        PSA__ALG_AEAD_WITH_DEFAULT_TAG_LENGTH__CASE(alg, PSA_ALG_GCM)   \
-        0)
-#define PSA__ALG_AEAD_WITH_DEFAULT_TAG_LENGTH__CASE(alg, ref) \
-    PSA_ALG_AEAD_WITH_TAG_LENGTH(alg, 0) == \
-    PSA_ALG_AEAD_WITH_TAG_LENGTH(ref, 0) ?  \
-    ref :
-
-#define PSA_ALG_RSA_PKCS1V15_SIGN_BASE          ((psa_algorithm_t)0x10020000)
-/** RSA PKCS#1 v1.5 signature with hashing.
- *
- * This is the signature scheme defined by RFC 8017
- * (PKCS#1: RSA Cryptography Specifications) under the name
- * RSASSA-PKCS1-v1_5.
- *
- * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
- *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
- *
- * \return              The corresponding RSA PKCS#1 v1.5 signature algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      hash algorithm.
- */
-#define PSA_ALG_RSA_PKCS1V15_SIGN(hash_alg)                             \
-    (PSA_ALG_RSA_PKCS1V15_SIGN_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-/** Raw PKCS#1 v1.5 signature.
- *
- * The input to this algorithm is the DigestInfo structure used by
- * RFC 8017 (PKCS#1: RSA Cryptography Specifications), &sect;9.2
- * steps 3&ndash;6.
- */
-#define PSA_ALG_RSA_PKCS1V15_SIGN_RAW PSA_ALG_RSA_PKCS1V15_SIGN_BASE
-#define PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg)                               \
-    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PKCS1V15_SIGN_BASE)
-
-#define PSA_ALG_RSA_PSS_BASE               ((psa_algorithm_t)0x10030000)
-/** RSA PSS signature with hashing.
- *
- * This is the signature scheme defined by RFC 8017
- * (PKCS#1: RSA Cryptography Specifications) under the name
- * RSASSA-PSS, with the message generation function MGF1, and with
- * a salt length equal to the length of the hash. The specified
- * hash algorithm is used to hash the input message, to create the
- * salted hash, and for the mask generation.
- *
- * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
- *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
- *
- * \return              The corresponding RSA PSS signature algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      hash algorithm.
- */
-#define PSA_ALG_RSA_PSS(hash_alg)                               \
-    (PSA_ALG_RSA_PSS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-#define PSA_ALG_IS_RSA_PSS(alg)                                 \
-    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PSS_BASE)
-
-#define PSA_ALG_DSA_BASE                        ((psa_algorithm_t)0x10040000)
-/** DSA signature with hashing.
- *
- * This is the signature scheme defined by FIPS 186-4,
- * with a random per-message secret number (*k*).
- *
- * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
- *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
- *
- * \return              The corresponding DSA signature algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      hash algorithm.
- */
-#define PSA_ALG_DSA(hash_alg)                             \
-    (PSA_ALG_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-#define PSA_ALG_DETERMINISTIC_DSA_BASE          ((psa_algorithm_t)0x10050000)
-#define PSA_ALG_DSA_DETERMINISTIC_FLAG          ((psa_algorithm_t)0x00010000)
-#define PSA_ALG_DETERMINISTIC_DSA(hash_alg)                             \
-    (PSA_ALG_DETERMINISTIC_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-#define PSA_ALG_IS_DSA(alg)                                             \
-    (((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_DSA_DETERMINISTIC_FLAG) ==  \
-     PSA_ALG_DSA_BASE)
-#define PSA_ALG_DSA_IS_DETERMINISTIC(alg)               \
-    (((alg) & PSA_ALG_DSA_DETERMINISTIC_FLAG) != 0)
-#define PSA_ALG_IS_DETERMINISTIC_DSA(alg)                       \
-    (PSA_ALG_IS_DSA(alg) && PSA_ALG_DSA_IS_DETERMINISTIC(alg))
-#define PSA_ALG_IS_RANDOMIZED_DSA(alg)                          \
-    (PSA_ALG_IS_DSA(alg) && !PSA_ALG_DSA_IS_DETERMINISTIC(alg))
-
-#define PSA_ALG_ECDSA_BASE                      ((psa_algorithm_t)0x10060000)
-/** ECDSA signature with hashing.
- *
- * This is the ECDSA signature scheme defined by ANSI X9.62,
- * with a random per-message secret number (*k*).
- *
- * The representation of the signature as a byte string consists of
- * the concatentation of the signature values *r* and *s*. Each of
- * *r* and *s* is encoded as an *N*-octet string, where *N* is the length
- * of the base point of the curve in octets. Each value is represented
- * in big-endian order (most significant octet first).
- *
- * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
- *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
- *
- * \return              The corresponding ECDSA signature algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      hash algorithm.
- */
-#define PSA_ALG_ECDSA(hash_alg)                                 \
-    (PSA_ALG_ECDSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-/** ECDSA signature without hashing.
- *
- * This is the same signature scheme as #PSA_ALG_ECDSA(), but
- * without specifying a hash algorithm. This algorithm may only be
- * used to sign or verify a sequence of bytes that should be an
- * already-calculated hash. Note that the input is padded with
- * zeros on the left or truncated on the left as required to fit
- * the curve size.
- */
-#define PSA_ALG_ECDSA_ANY PSA_ALG_ECDSA_BASE
-#define PSA_ALG_DETERMINISTIC_ECDSA_BASE        ((psa_algorithm_t)0x10070000)
-/** Deterministic ECDSA signature with hashing.
- *
- * This is the deterministic ECDSA signature scheme defined by RFC 6979.
- *
- * The representation of a signature is the same as with #PSA_ALG_ECDSA().
- *
- * Note that when this algorithm is used for verification, signatures
- * made with randomized ECDSA (#PSA_ALG_ECDSA(\p hash_alg)) with the
- * same private key are accepted. In other words,
- * #PSA_ALG_DETERMINISTIC_ECDSA(\p hash_alg) differs from
- * #PSA_ALG_ECDSA(\p hash_alg) only for signature, not for verification.
- *
- * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
- *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
- *
- * \return              The corresponding deterministic ECDSA signature
- *                      algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      hash algorithm.
- */
-#define PSA_ALG_DETERMINISTIC_ECDSA(hash_alg)                           \
-    (PSA_ALG_DETERMINISTIC_ECDSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-#define PSA_ALG_IS_ECDSA(alg)                                           \
-    (((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_DSA_DETERMINISTIC_FLAG) ==  \
-     PSA_ALG_ECDSA_BASE)
-#define PSA_ALG_ECDSA_IS_DETERMINISTIC(alg)             \
-    (((alg) & PSA_ALG_DSA_DETERMINISTIC_FLAG) != 0)
-#define PSA_ALG_IS_DETERMINISTIC_ECDSA(alg)                             \
-    (PSA_ALG_IS_ECDSA(alg) && PSA_ALG_ECDSA_IS_DETERMINISTIC(alg))
-#define PSA_ALG_IS_RANDOMIZED_ECDSA(alg)                                \
-    (PSA_ALG_IS_ECDSA(alg) && !PSA_ALG_ECDSA_IS_DETERMINISTIC(alg))
-
-/** Get the hash used by a hash-and-sign signature algorithm.
- *
- * A hash-and-sign algorithm is a signature algorithm which is
- * composed of two phases: first a hashing phase which does not use
- * the key and produces a hash of the input message, then a signing
- * phase which only uses the hash and the key and not the message
- * itself.
- *
- * \param alg   A signature algorithm (\c PSA_ALG_XXX value such that
- *              #PSA_ALG_IS_SIGN(\p alg) is true).
- *
- * \return      The underlying hash algorithm if \p alg is a hash-and-sign
- *              algorithm.
- * \return      0 if \p alg is a signature algorithm that does not
- *              follow the hash-and-sign structure.
- * \return      Unspecified if \p alg is not a signature algorithm or
- *              if it is not supported by the implementation.
- */
-#define PSA_ALG_SIGN_GET_HASH(alg)                                     \
-    (PSA_ALG_IS_RSA_PSS(alg) || PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg) ||   \
-     PSA_ALG_IS_DSA(alg) || PSA_ALG_IS_ECDSA(alg) ?                    \
-     ((alg) & PSA_ALG_HASH_MASK) == 0 ? /*"raw" algorithm*/ 0 :        \
-     ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH :             \
-     0)
-
-/** RSA PKCS#1 v1.5 encryption.
- */
-#define PSA_ALG_RSA_PKCS1V15_CRYPT              ((psa_algorithm_t)0x12020000)
-
-#define PSA_ALG_RSA_OAEP_BASE                   ((psa_algorithm_t)0x12030000)
-/** RSA OAEP encryption.
- *
- * This is the encryption scheme defined by RFC 8017
- * (PKCS#1: RSA Cryptography Specifications) under the name
- * RSAES-OAEP, with the message generation function MGF1.
- *
- * \param hash_alg      The hash algorithm (\c PSA_ALG_XXX value such that
- *                      #PSA_ALG_IS_HASH(\p hash_alg) is true) to use
- *                      for MGF1.
- *
- * \return              The corresponding RSA OAEP signature algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      hash algorithm.
- */
-#define PSA_ALG_RSA_OAEP(hash_alg)                              \
-    (PSA_ALG_RSA_OAEP_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-#define PSA_ALG_IS_RSA_OAEP(alg)                                \
-    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_OAEP_BASE)
-#define PSA_ALG_RSA_OAEP_GET_HASH(alg)                          \
-    (PSA_ALG_IS_RSA_OAEP(alg) ?                                 \
-     ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH :      \
-     0)
-
-#define PSA_ALG_HKDF_BASE                       ((psa_algorithm_t)0x30000100)
-/** Macro to build an HKDF algorithm.
- *
- * For example, `PSA_ALG_HKDF(PSA_ALG_SHA256)` is HKDF using HMAC-SHA-256.
- *
- * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
- *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
- *
- * \return              The corresponding HKDF algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      hash algorithm.
- */
-#define PSA_ALG_HKDF(hash_alg)                                  \
-    (PSA_ALG_HKDF_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-/** Whether the specified algorithm is an HKDF algorithm.
- *
- * HKDF is a family of key derivation algorithms that are based on a hash
- * function and the HMAC construction.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \c alg is an HKDF algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \c alg is not a supported
- *         key derivation algorithm identifier.
- */
-#define PSA_ALG_IS_HKDF(alg)                            \
-    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HKDF_BASE)
-#define PSA_ALG_HKDF_GET_HASH(hkdf_alg)                         \
-    (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK))
-
-#define PSA_ALG_TLS12_PRF_BASE                     ((psa_algorithm_t)0x30000200)
-/** Macro to build a TLS-1.2 PRF algorithm.
- *
- * TLS 1.2 uses a custom pseudorandom function (PRF) for key schedule,
- * specified in Section 5 of RFC 5246. It is based on HMAC and can be
- * used with either SHA-256 or SHA-384.
- *
- * For the application to TLS-1.2, the salt and label arguments passed
- * to psa_key_derivation() are what's called 'seed' and 'label' in RFC 5246,
- * respectively. For example, for TLS key expansion, the salt is the
- * concatenation of ServerHello.Random + ClientHello.Random,
- * while the label is "key expansion".
- *
- * For example, `PSA_ALG_TLS12_PRF(PSA_ALG_SHA256)` represents the
- * TLS 1.2 PRF using HMAC-SHA-256.
- *
- * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
- *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
- *
- * \return              The corresponding TLS-1.2 PRF algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      hash algorithm.
- */
-#define PSA_ALG_TLS12_PRF(hash_alg)                                  \
-    (PSA_ALG_TLS12_PRF_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-
-/** Whether the specified algorithm is a TLS-1.2 PRF algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \c alg is a TLS-1.2 PRF algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \c alg is not a supported
- *         key derivation algorithm identifier.
- */
-#define PSA_ALG_IS_TLS12_PRF(alg)                                    \
-    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_TLS12_PRF_BASE)
-#define PSA_ALG_TLS12_PRF_GET_HASH(hkdf_alg)                         \
-    (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK))
-
-#define PSA_ALG_TLS12_PSK_TO_MS_BASE ((psa_algorithm_t)0x30000300)
-/** Macro to build a TLS-1.2 PSK-to-MasterSecret algorithm.
- *
- * In a pure-PSK handshake in TLS 1.2, the master secret is derived
- * from the PreSharedKey (PSK) through the application of padding
- * (RFC 4279, Section 2) and the TLS-1.2 PRF (RFC 5246, Section 5).
- * The latter is based on HMAC and can be used with either SHA-256
- * or SHA-384.
- *
- * For the application to TLS-1.2, the salt passed to psa_key_derivation()
- * (and forwarded to the TLS-1.2 PRF) is the concatenation of the
- * ClientHello.Random + ServerHello.Random, while the label is "master secret"
- * or "extended master secret".
- *
- * For example, `PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA256)` represents the
- * TLS-1.2 PSK to MasterSecret derivation PRF using HMAC-SHA-256.
- *
- * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
- *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
- *
- * \return              The corresponding TLS-1.2 PSK to MS algorithm.
- * \return              Unspecified if \p alg is not a supported
- *                      hash algorithm.
- */
-#define PSA_ALG_TLS12_PSK_TO_MS(hash_alg)                                  \
-    (PSA_ALG_TLS12_PSK_TO_MS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
-
-/** Whether the specified algorithm is a TLS-1.2 PSK to MS algorithm.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \c alg is a TLS-1.2 PSK to MS algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \c alg is not a supported
- *         key derivation algorithm identifier.
- */
-#define PSA_ALG_IS_TLS12_PSK_TO_MS(alg)                                    \
-    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_TLS12_PSK_TO_MS_BASE)
-#define PSA_ALG_TLS12_PSK_TO_MS_GET_HASH(hkdf_alg)                         \
-    (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK))
-
-#define PSA_ALG_KEY_DERIVATION_MASK             ((psa_algorithm_t)0x010fffff)
-
-/** Use a shared secret as is.
- *
- * Specify this algorithm as the selection component of a key agreement
- * to use the raw result of the key agreement as key material.
- *
- * \warning The raw result of a key agreement algorithm such as finite-field
- * Diffie-Hellman or elliptic curve Diffie-Hellman has biases and should
- * not be used directly as key material. It can however be used as the secret
- * input in a key derivation algorithm.
- */
-#define PSA_ALG_SELECT_RAW                      ((psa_algorithm_t)0x31000001)
-
-#define PSA_ALG_KEY_AGREEMENT_GET_KDF(alg)                              \
-    (((alg) & PSA_ALG_KEY_DERIVATION_MASK) | PSA_ALG_CATEGORY_KEY_DERIVATION)
-
-#define PSA_ALG_KEY_AGREEMENT_GET_BASE(alg)                              \
-    ((alg) & ~PSA_ALG_KEY_DERIVATION_MASK)
-
-#define PSA_ALG_FFDH_BASE                       ((psa_algorithm_t)0x22100000)
-/** The Diffie-Hellman key agreement algorithm.
- *
- * This algorithm combines the finite-field Diffie-Hellman (DH) key
- * agreement, also known as Diffie-Hellman-Merkle (DHM) key agreement,
- * to produce a shared secret from a private key and the peer's
- * public key, with a key selection or key derivation algorithm to produce
- * one or more shared keys and other shared cryptographic material.
- *
- * The shared secret produced by key agreement and passed as input to the
- * derivation or selection algorithm \p kdf_alg is the shared secret
- * `g^{ab}` in big-endian format.
- * It is `ceiling(m / 8)` bytes long where `m` is the size of the prime `p`
- * in bits.
- *
- * \param kdf_alg       A key derivation algorithm (\c PSA_ALG_XXX value such
- *                      that #PSA_ALG_IS_KEY_DERIVATION(\p hash_alg) is true)
- *                      or a key selection algorithm (\c PSA_ALG_XXX value such
- *                      that #PSA_ALG_IS_KEY_SELECTION(\p hash_alg) is true).
- *
- * \return              The Diffie-Hellman algorithm with the specified
- *                      selection or derivation algorithm.
- */
-#define PSA_ALG_FFDH(kdf_alg) \
-    (PSA_ALG_FFDH_BASE | ((kdf_alg) & PSA_ALG_KEY_DERIVATION_MASK))
-/** Whether the specified algorithm is a finite field Diffie-Hellman algorithm.
- *
- * This includes every supported key selection or key agreement algorithm
- * for the output of the Diffie-Hellman calculation.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \c alg is a finite field Diffie-Hellman algorithm, 0 otherwise.
- *         This macro may return either 0 or 1 if \c alg is not a supported
- *         key agreement algorithm identifier.
- */
-#define PSA_ALG_IS_FFDH(alg) \
-    (PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) == PSA_ALG_FFDH_BASE)
-
-#define PSA_ALG_ECDH_BASE                       ((psa_algorithm_t)0x22200000)
-/** The elliptic curve Diffie-Hellman (ECDH) key agreement algorithm.
- *
- * This algorithm combines the elliptic curve Diffie-Hellman key
- * agreement to produce a shared secret from a private key and the peer's
- * public key, with a key selection or key derivation algorithm to produce
- * one or more shared keys and other shared cryptographic material.
- *
- * The shared secret produced by key agreement and passed as input to the
- * derivation or selection algorithm \p kdf_alg is the x-coordinate of
- * the shared secret point. It is always `ceiling(m / 8)` bytes long where
- * `m` is the bit size associated with the curve, i.e. the bit size of the
- * order of the curve's coordinate field. When `m` is not a multiple of 8,
- * the byte containing the most significant bit of the shared secret
- * is padded with zero bits. The byte order is either little-endian
- * or big-endian depending on the curve type.
- *
- * - For Montgomery curves (curve types `PSA_ECC_CURVE_CURVEXXX`),
- *   the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A`
- *   in little-endian byte order.
- *   The bit size is 448 for Curve448 and 255 for Curve25519.
- * - For Weierstrass curves over prime fields (curve types
- *   `PSA_ECC_CURVE_SECPXXX` and `PSA_ECC_CURVE_BRAINPOOL_PXXX`),
- *   the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A`
- *   in big-endian byte order.
- *   The bit size is `m = ceiling(log_2(p))` for the field `F_p`.
- * - For Weierstrass curves over binary fields (curve types
- *   `PSA_ECC_CURVE_SECTXXX`),
- *   the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A`
- *   in big-endian byte order.
- *   The bit size is `m` for the field `F_{2^m}`.
- *
- * \param kdf_alg       A key derivation algorithm (\c PSA_ALG_XXX value such
- *                      that #PSA_ALG_IS_KEY_DERIVATION(\p hash_alg) is true)
- *                      or a selection algorithm (\c PSA_ALG_XXX value such
- *                      that #PSA_ALG_IS_KEY_SELECTION(\p hash_alg) is true).
- *
- * \return              The Diffie-Hellman algorithm with the specified
- *                      selection or derivation algorithm.
- */
-#define PSA_ALG_ECDH(kdf_alg) \
-    (PSA_ALG_ECDH_BASE | ((kdf_alg) & PSA_ALG_KEY_DERIVATION_MASK))
-/** Whether the specified algorithm is an elliptic curve Diffie-Hellman
- * algorithm.
- *
- * This includes every supported key selection or key agreement algorithm
- * for the output of the Diffie-Hellman calculation.
- *
- * \param alg An algorithm identifier (value of type #psa_algorithm_t).
- *
- * \return 1 if \c alg is an elliptic curve Diffie-Hellman algorithm,
- *         0 otherwise.
- *         This macro may return either 0 or 1 if \c alg is not a supported
- *         key agreement algorithm identifier.
- */
-#define PSA_ALG_IS_ECDH(alg) \
-    (PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) == PSA_ALG_ECDH_BASE)
-
 /**@}*/
 
 /** \defgroup key_management Key management
  * @{
  */
 
-/** Encoding of key lifetimes.
- */
-typedef uint32_t psa_key_lifetime_t;
-
-/** Encoding of identifiers of persistent keys.
- */
-typedef uint32_t psa_key_id_t;
-
-/** A volatile key only exists as long as the handle to it is not closed.
- * The key material is guaranteed to be erased on a power reset.
- */
-#define PSA_KEY_LIFETIME_VOLATILE               ((psa_key_lifetime_t)0x00000000)
-
-/** The default storage area for persistent keys.
- *
- * A persistent key remains in storage until it is explicitly destroyed or
- * until the corresponding storage area is wiped. This specification does
- * not define any mechanism to wipe a storage area, but implementations may
- * provide their own mechanism (for example to perform a factory reset,
- * to prepare for device refurbishment, or to uninstall an application).
- *
- * This lifetime value is the default storage area for the calling
- * application. Implementations may offer other storage areas designated
- * by other lifetime values as implementation-specific extensions.
- */
-#define PSA_KEY_LIFETIME_PERSISTENT             ((psa_key_lifetime_t)0x00000001)
-
 /** \brief Retrieve the lifetime of an open key.
  *
  * \param handle        Handle to query.
@@ -1900,68 +573,6 @@
  * @{
  */
 
-/** \brief Encoding of permitted usage on a key. */
-typedef uint32_t psa_key_usage_t;
-
-/** Whether the key may be exported.
- *
- * A public key or the public part of a key pair may always be exported
- * regardless of the value of this permission flag.
- *
- * If a key does not have export permission, implementations shall not
- * allow the key to be exported in plain form from the cryptoprocessor,
- * whether through psa_export_key() or through a proprietary interface.
- * The key may however be exportable in a wrapped form, i.e. in a form
- * where it is encrypted by another key.
- */
-#define PSA_KEY_USAGE_EXPORT                    ((psa_key_usage_t)0x00000001)
-
-/** Whether the key may be used to encrypt a message.
- *
- * This flag allows the key to be used for a symmetric encryption operation,
- * for an AEAD encryption-and-authentication operation,
- * or for an asymmetric encryption operation,
- * if otherwise permitted by the key's type and policy.
- *
- * For a key pair, this concerns the public key.
- */
-#define PSA_KEY_USAGE_ENCRYPT                   ((psa_key_usage_t)0x00000100)
-
-/** Whether the key may be used to decrypt a message.
- *
- * This flag allows the key to be used for a symmetric decryption operation,
- * for an AEAD decryption-and-verification operation,
- * or for an asymmetric decryption operation,
- * if otherwise permitted by the key's type and policy.
- *
- * For a key pair, this concerns the private key.
- */
-#define PSA_KEY_USAGE_DECRYPT                   ((psa_key_usage_t)0x00000200)
-
-/** Whether the key may be used to sign a message.
- *
- * This flag allows the key to be used for a MAC calculation operation
- * or for an asymmetric signature operation,
- * if otherwise permitted by the key's type and policy.
- *
- * For a key pair, this concerns the private key.
- */
-#define PSA_KEY_USAGE_SIGN                      ((psa_key_usage_t)0x00000400)
-
-/** Whether the key may be used to verify a message signature.
- *
- * This flag allows the key to be used for a MAC verification operation
- * or for an asymmetric signature verification operation,
- * if otherwise permitted by by the key's type and policy.
- *
- * For a key pair, this concerns the public key.
- */
-#define PSA_KEY_USAGE_VERIFY                    ((psa_key_usage_t)0x00000800)
-
-/** Whether the key may be used to derive other keys.
- */
-#define PSA_KEY_USAGE_DERIVE                    ((psa_key_usage_t)0x00001000)
-
 /** The type of the key policy data structure.
  *
  * This is an implementation-defined \c struct. Applications should not
diff --git a/include/psa/crypto_types.h b/include/psa/crypto_types.h
new file mode 100644
index 0000000..9b44d6a
--- /dev/null
+++ b/include/psa/crypto_types.h
@@ -0,0 +1,101 @@
+/**
+ * \file psa/crypto_types.h
+ *
+ * \brief PSA cryptography module: type aliases.
+ *
+ * \note This file may not be included directly. Applications must
+ * include psa/crypto.h. Drivers must include the appropriate driver
+ * header file.
+ *
+ * This file contains portable definitions of integral types for properties
+ * of cryptographic keys, designations of cryptographic algorithms, and
+ * error codes returned by the library.
+ *
+ * This header file does not declare any function.
+ */
+/*
+ *  Copyright (C) 2018, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+
+#ifndef PSA_CRYPTO_TYPES_H
+#define PSA_CRYPTO_TYPES_H
+
+#include <stdint.h>
+
+/** \defgroup error Error codes
+ * @{
+ */
+
+/**
+ * \brief Function return status.
+ *
+ * This is either #PSA_SUCCESS (which is zero), indicating success,
+ * or a nonzero value indicating that an error occurred. Errors are
+ * encoded as one of the \c PSA_ERROR_xxx values defined here.
+ */
+typedef int32_t psa_status_t;
+
+/**@}*/
+
+/** \defgroup crypto_types Key and algorithm types
+ * @{
+ */
+
+/** \brief Encoding of a key type.
+ */
+typedef uint32_t psa_key_type_t;
+
+/** The type of PSA elliptic curve identifiers. */
+typedef uint16_t psa_ecc_curve_t;
+
+/** \brief Encoding of a cryptographic algorithm.
+ *
+ * For algorithms that can be applied to multiple key types, this type
+ * does not encode the key type. For example, for symmetric ciphers
+ * based on a block cipher, #psa_algorithm_t encodes the block cipher
+ * mode and the padding mode while the block cipher itself is encoded
+ * via #psa_key_type_t.
+ */
+typedef uint32_t psa_algorithm_t;
+
+/**@}*/
+
+/** \defgroup key_lifetimes Key lifetimes
+ * @{
+ */
+
+/** Encoding of key lifetimes.
+ */
+typedef uint32_t psa_key_lifetime_t;
+
+/** Encoding of identifiers of persistent keys.
+ */
+typedef uint32_t psa_key_id_t;
+
+/**@}*/
+
+/** \defgroup policy Key policies
+ * @{
+ */
+
+/** \brief Encoding of permitted usage on a key. */
+typedef uint32_t psa_key_usage_t;
+
+/**@}*/
+
+#endif /* PSA_CRYPTO_TYPES_H */
diff --git a/include/psa/crypto_values.h b/include/psa/crypto_values.h
new file mode 100644
index 0000000..d83ad1b
--- /dev/null
+++ b/include/psa/crypto_values.h
@@ -0,0 +1,1418 @@
+/**
+ * \file psa/crypto_values.h
+ *
+ * \brief PSA cryptography module: macros to build and analyze integer values.
+ *
+ * \note This file may not be included directly. Applications must
+ * include psa/crypto.h. Drivers must include the appropriate driver
+ * header file.
+ *
+ * This file contains portable definitions of macros to build and analyze
+ * values of integral types that encode properties of cryptographic keys,
+ * designations of cryptographic algorithms, and error codes returned by
+ * the library.
+ *
+ * This header file only defines preprocessor macros.
+ */
+/*
+ *  Copyright (C) 2018, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+
+#ifndef PSA_CRYPTO_VALUES_H
+#define PSA_CRYPTO_VALUES_H
+
+/** \defgroup error Error codes
+ * @{
+ */
+
+#if !defined(PSA_SUCCESS)
+/* If PSA_SUCCESS is defined, assume that PSA crypto is being used
+ * together with PSA IPC, which also defines the identifier
+ * PSA_SUCCESS. We must not define PSA_SUCCESS ourselves in that case;
+ * the other error code names don't clash. This is a temporary hack
+ * until we unify error reporting in PSA IPC and PSA crypto.
+ *
+ * Note that psa_defs.h must be included before this header!
+ */
+/** The action was completed successfully. */
+#define PSA_SUCCESS ((psa_status_t)0)
+#endif /* !defined(PSA_SUCCESS) */
+
+/** An error occurred that does not correspond to any defined
+ * failure cause.
+ *
+ * Implementations may use this error code if none of the other standard
+ * error codes are applicable. */
+#define PSA_ERROR_UNKNOWN_ERROR         ((psa_status_t)1)
+
+/** The requested operation or a parameter is not supported
+ * by this implementation.
+ *
+ * Implementations should return this error code when an enumeration
+ * parameter such as a key type, algorithm, etc. is not recognized.
+ * If a combination of parameters is recognized and identified as
+ * not valid, return #PSA_ERROR_INVALID_ARGUMENT instead. */
+#define PSA_ERROR_NOT_SUPPORTED         ((psa_status_t)2)
+
+/** The requested action is denied by a policy.
+ *
+ * Implementations should return this error code when the parameters
+ * are recognized as valid and supported, and a policy explicitly
+ * denies the requested operation.
+ *
+ * If a subset of the parameters of a function call identify a
+ * forbidden operation, and another subset of the parameters are
+ * not valid or not supported, it is unspecified whether the function
+ * returns #PSA_ERROR_NOT_PERMITTED, #PSA_ERROR_NOT_SUPPORTED or
+ * #PSA_ERROR_INVALID_ARGUMENT. */
+#define PSA_ERROR_NOT_PERMITTED         ((psa_status_t)3)
+
+/** An output buffer is too small.
+ *
+ * Applications can call the \c PSA_xxx_SIZE macro listed in the function
+ * description to determine a sufficient buffer size.
+ *
+ * Implementations should preferably return this error code only
+ * in cases when performing the operation with a larger output
+ * buffer would succeed. However implementations may return this
+ * error if a function has invalid or unsupported parameters in addition
+ * to the parameters that determine the necessary output buffer size. */
+#define PSA_ERROR_BUFFER_TOO_SMALL      ((psa_status_t)4)
+
+/** A slot is occupied, but must be empty to carry out the
+ * requested action.
+ *
+ * If a handle is invalid, it does not designate an occupied slot.
+ * The error for an invalid handle is #PSA_ERROR_INVALID_HANDLE.
+ */
+#define PSA_ERROR_OCCUPIED_SLOT         ((psa_status_t)5)
+
+/** A slot is empty, but must be occupied to carry out the
+ * requested action.
+ *
+ * If a handle is invalid, it does not designate an empty slot.
+ * The error for an invalid handle is #PSA_ERROR_INVALID_HANDLE.
+ */
+#define PSA_ERROR_EMPTY_SLOT            ((psa_status_t)6)
+
+/** The requested action cannot be performed in the current state.
+ *
+ * Multipart operations return this error when one of the
+ * functions is called out of sequence. Refer to the function
+ * descriptions for permitted sequencing of functions.
+ *
+ * Implementations shall not return this error code to indicate
+ * that a key slot is occupied when it needs to be free or vice versa,
+ * but shall return #PSA_ERROR_OCCUPIED_SLOT or #PSA_ERROR_EMPTY_SLOT
+ * as applicable. */
+#define PSA_ERROR_BAD_STATE             ((psa_status_t)7)
+
+/** The parameters passed to the function are invalid.
+ *
+ * Implementations may return this error any time a parameter or
+ * combination of parameters are recognized as invalid.
+ *
+ * Implementations shall not return this error code to indicate
+ * that a key slot is occupied when it needs to be free or vice versa,
+ * but shall return #PSA_ERROR_OCCUPIED_SLOT or #PSA_ERROR_EMPTY_SLOT
+ * as applicable.
+ *
+ * Implementation shall not return this error code to indicate that a
+ * key handle is invalid, but shall return #PSA_ERROR_INVALID_HANDLE
+ * instead.
+ */
+#define PSA_ERROR_INVALID_ARGUMENT      ((psa_status_t)8)
+
+/** There is not enough runtime memory.
+ *
+ * If the action is carried out across multiple security realms, this
+ * error can refer to available memory in any of the security realms. */
+#define PSA_ERROR_INSUFFICIENT_MEMORY   ((psa_status_t)9)
+
+/** There is not enough persistent storage.
+ *
+ * Functions that modify the key storage return this error code if
+ * there is insufficient storage space on the host media. In addition,
+ * many functions that do not otherwise access storage may return this
+ * error code if the implementation requires a mandatory log entry for
+ * the requested action and the log storage space is full. */
+#define PSA_ERROR_INSUFFICIENT_STORAGE  ((psa_status_t)10)
+
+/** There was a communication failure inside the implementation.
+ *
+ * This can indicate a communication failure between the application
+ * and an external cryptoprocessor or between the cryptoprocessor and
+ * an external volatile or persistent memory. A communication failure
+ * may be transient or permanent depending on the cause.
+ *
+ * \warning If a function returns this error, it is undetermined
+ * whether the requested action has completed or not. Implementations
+ * should return #PSA_SUCCESS on successful completion whenver
+ * possible, however functions may return #PSA_ERROR_COMMUNICATION_FAILURE
+ * if the requested action was completed successfully in an external
+ * cryptoprocessor but there was a breakdown of communication before
+ * the cryptoprocessor could report the status to the application.
+ */
+#define PSA_ERROR_COMMUNICATION_FAILURE ((psa_status_t)11)
+
+/** There was a storage failure that may have led to data loss.
+ *
+ * This error indicates that some persistent storage is corrupted.
+ * It should not be used for a corruption of volatile memory
+ * (use #PSA_ERROR_TAMPERING_DETECTED), for a communication error
+ * between the cryptoprocessor and its external storage (use
+ * #PSA_ERROR_COMMUNICATION_FAILURE), or when the storage is
+ * in a valid state but is full (use #PSA_ERROR_INSUFFICIENT_STORAGE).
+ *
+ * Note that a storage failure does not indicate that any data that was
+ * previously read is invalid. However this previously read data may no
+ * longer be readable from storage.
+ *
+ * When a storage failure occurs, it is no longer possible to ensure
+ * the global integrity of the keystore. Depending on the global
+ * integrity guarantees offered by the implementation, access to other
+ * data may or may not fail even if the data is still readable but
+ * its integrity canont be guaranteed.
+ *
+ * Implementations should only use this error code to report a
+ * permanent storage corruption. However application writers should
+ * keep in mind that transient errors while reading the storage may be
+ * reported using this error code. */
+#define PSA_ERROR_STORAGE_FAILURE       ((psa_status_t)12)
+
+/** A hardware failure was detected.
+ *
+ * A hardware failure may be transient or permanent depending on the
+ * cause. */
+#define PSA_ERROR_HARDWARE_FAILURE      ((psa_status_t)13)
+
+/** A tampering attempt was detected.
+ *
+ * If an application receives this error code, there is no guarantee
+ * that previously accessed or computed data was correct and remains
+ * confidential. Applications should not perform any security function
+ * and should enter a safe failure state.
+ *
+ * Implementations may return this error code if they detect an invalid
+ * state that cannot happen during normal operation and that indicates
+ * that the implementation's security guarantees no longer hold. Depending
+ * on the implementation architecture and on its security and safety goals,
+ * the implementation may forcibly terminate the application.
+ *
+ * This error code is intended as a last resort when a security breach
+ * is detected and it is unsure whether the keystore data is still
+ * protected. Implementations shall only return this error code
+ * to report an alarm from a tampering detector, to indicate that
+ * the confidentiality of stored data can no longer be guaranteed,
+ * or to indicate that the integrity of previously returned data is now
+ * considered compromised. Implementations shall not use this error code
+ * to indicate a hardware failure that merely makes it impossible to
+ * perform the requested operation (use #PSA_ERROR_COMMUNICATION_FAILURE,
+ * #PSA_ERROR_STORAGE_FAILURE, #PSA_ERROR_HARDWARE_FAILURE,
+ * #PSA_ERROR_INSUFFICIENT_ENTROPY or other applicable error code
+ * instead).
+ *
+ * This error indicates an attack against the application. Implementations
+ * shall not return this error code as a consequence of the behavior of
+ * the application itself. */
+#define PSA_ERROR_TAMPERING_DETECTED    ((psa_status_t)14)
+
+/** There is not enough entropy to generate random data needed
+ * for the requested action.
+ *
+ * This error indicates a failure of a hardware random generator.
+ * Application writers should note that this error can be returned not
+ * only by functions whose purpose is to generate random data, such
+ * as key, IV or nonce generation, but also by functions that execute
+ * an algorithm with a randomized result, as well as functions that
+ * use randomization of intermediate computations as a countermeasure
+ * to certain attacks.
+ *
+ * Implementations should avoid returning this error after psa_crypto_init()
+ * has succeeded. Implementations should generate sufficient
+ * entropy during initialization and subsequently use a cryptographically
+ * secure pseudorandom generator (PRNG). However implementations may return
+ * this error at any time if a policy requires the PRNG to be reseeded
+ * during normal operation. */
+#define PSA_ERROR_INSUFFICIENT_ENTROPY  ((psa_status_t)15)
+
+/** The signature, MAC or hash is incorrect.
+ *
+ * Verification functions return this error if the verification
+ * calculations completed successfully, and the value to be verified
+ * was determined to be incorrect.
+ *
+ * If the value to verify has an invalid size, implementations may return
+ * either #PSA_ERROR_INVALID_ARGUMENT or #PSA_ERROR_INVALID_SIGNATURE. */
+#define PSA_ERROR_INVALID_SIGNATURE     ((psa_status_t)16)
+
+/** The decrypted padding is incorrect.
+ *
+ * \warning In some protocols, when decrypting data, it is essential that
+ * the behavior of the application does not depend on whether the padding
+ * is correct, down to precise timing. Applications should prefer
+ * protocols that use authenticated encryption rather than plain
+ * encryption. If the application must perform a decryption of
+ * unauthenticated data, the application writer should take care not
+ * to reveal whether the padding is invalid.
+ *
+ * Implementations should strive to make valid and invalid padding
+ * as close as possible to indistinguishable to an external observer.
+ * In particular, the timing of a decryption operation should not
+ * depend on the validity of the padding. */
+#define PSA_ERROR_INVALID_PADDING       ((psa_status_t)17)
+
+/** The generator has insufficient capacity left.
+ *
+ * Once a function returns this error, attempts to read from the
+ * generator will always return this error. */
+#define PSA_ERROR_INSUFFICIENT_CAPACITY ((psa_status_t)18)
+
+/** The key handle is not valid.
+ */
+#define PSA_ERROR_INVALID_HANDLE        ((psa_status_t)19)
+
+/**@}*/
+
+/** \defgroup crypto_types Key and algorithm types
+ * @{
+ */
+
+/** An invalid key type value.
+ *
+ * Zero is not the encoding of any key type.
+ */
+#define PSA_KEY_TYPE_NONE                       ((psa_key_type_t)0x00000000)
+
+/** Vendor-defined flag
+ *
+ * Key types defined by this standard will never have the
+ * #PSA_KEY_TYPE_VENDOR_FLAG bit set. Vendors who define additional key types
+ * must use an encoding with the #PSA_KEY_TYPE_VENDOR_FLAG bit set and should
+ * respect the bitwise structure used by standard encodings whenever practical.
+ */
+#define PSA_KEY_TYPE_VENDOR_FLAG                ((psa_key_type_t)0x80000000)
+
+#define PSA_KEY_TYPE_CATEGORY_MASK              ((psa_key_type_t)0x70000000)
+#define PSA_KEY_TYPE_CATEGORY_SYMMETRIC         ((psa_key_type_t)0x40000000)
+#define PSA_KEY_TYPE_CATEGORY_RAW               ((psa_key_type_t)0x50000000)
+#define PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY        ((psa_key_type_t)0x60000000)
+#define PSA_KEY_TYPE_CATEGORY_KEY_PAIR          ((psa_key_type_t)0x70000000)
+
+#define PSA_KEY_TYPE_CATEGORY_FLAG_PAIR         ((psa_key_type_t)0x10000000)
+
+/** Whether a key type is vendor-defined. */
+#define PSA_KEY_TYPE_IS_VENDOR_DEFINED(type) \
+    (((type) & PSA_KEY_TYPE_VENDOR_FLAG) != 0)
+
+/** Whether a key type is an unstructured array of bytes.
+ *
+ * This encompasses both symmetric keys and non-key data.
+ */
+#define PSA_KEY_TYPE_IS_UNSTRUCTURED(type) \
+    (((type) & PSA_KEY_TYPE_CATEGORY_MASK & ~(psa_key_type_t)0x10000000) == \
+     PSA_KEY_TYPE_CATEGORY_SYMMETRIC)
+
+/** Whether a key type is asymmetric: either a key pair or a public key. */
+#define PSA_KEY_TYPE_IS_ASYMMETRIC(type)                                \
+    (((type) & PSA_KEY_TYPE_CATEGORY_MASK                               \
+      & ~PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) ==                            \
+     PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY)
+/** Whether a key type is the public part of a key pair. */
+#define PSA_KEY_TYPE_IS_PUBLIC_KEY(type)                                \
+    (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY)
+/** Whether a key type is a key pair containing a private part and a public
+ * part. */
+#define PSA_KEY_TYPE_IS_KEYPAIR(type)                                   \
+    (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_KEY_PAIR)
+/** The key pair type corresponding to a public key type.
+ *
+ * You may also pass a key pair type as \p type, it will be left unchanged.
+ *
+ * \param type      A public key type or key pair type.
+ *
+ * \return          The corresponding key pair type.
+ *                  If \p type is not a public key or a key pair,
+ *                  the return value is undefined.
+ */
+#define PSA_KEY_TYPE_KEYPAIR_OF_PUBLIC_KEY(type)        \
+    ((type) | PSA_KEY_TYPE_CATEGORY_FLAG_PAIR)
+/** The public key type corresponding to a key pair type.
+ *
+ * You may also pass a key pair type as \p type, it will be left unchanged.
+ *
+ * \param type      A public key type or key pair type.
+ *
+ * \return          The corresponding public key type.
+ *                  If \p type is not a public key or a key pair,
+ *                  the return value is undefined.
+ */
+#define PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type)        \
+    ((type) & ~PSA_KEY_TYPE_CATEGORY_FLAG_PAIR)
+
+/** Raw data.
+ *
+ * A "key" of this type cannot be used for any cryptographic operation.
+ * Applications may use this type to store arbitrary data in the keystore. */
+#define PSA_KEY_TYPE_RAW_DATA                   ((psa_key_type_t)0x50000001)
+
+/** HMAC key.
+ *
+ * The key policy determines which underlying hash algorithm the key can be
+ * used for.
+ *
+ * HMAC keys should generally have the same size as the underlying hash.
+ * This size can be calculated with #PSA_HASH_SIZE(\c alg) where
+ * \c alg is the HMAC algorithm or the underlying hash algorithm. */
+#define PSA_KEY_TYPE_HMAC                       ((psa_key_type_t)0x51000000)
+
+/** A secret for key derivation.
+ *
+ * The key policy determines which key derivation algorithm the key
+ * can be used for.
+ */
+#define PSA_KEY_TYPE_DERIVE                     ((psa_key_type_t)0x52000000)
+
+/** Key for an cipher, AEAD or MAC algorithm based on the AES block cipher.
+ *
+ * The size of the key can be 16 bytes (AES-128), 24 bytes (AES-192) or
+ * 32 bytes (AES-256).
+ */
+#define PSA_KEY_TYPE_AES                        ((psa_key_type_t)0x40000001)
+
+/** Key for a cipher or MAC algorithm based on DES or 3DES (Triple-DES).
+ *
+ * The size of the key can be 8 bytes (single DES), 16 bytes (2-key 3DES) or
+ * 24 bytes (3-key 3DES).
+ *
+ * Note that single DES and 2-key 3DES are weak and strongly
+ * deprecated and should only be used to decrypt legacy data. 3-key 3DES
+ * is weak and deprecated and should only be used in legacy protocols.
+ */
+#define PSA_KEY_TYPE_DES                        ((psa_key_type_t)0x40000002)
+
+/** Key for an cipher, AEAD or MAC algorithm based on the
+ * Camellia block cipher. */
+#define PSA_KEY_TYPE_CAMELLIA                   ((psa_key_type_t)0x40000003)
+
+/** Key for the RC4 stream cipher.
+ *
+ * Note that RC4 is weak and deprecated and should only be used in
+ * legacy protocols. */
+#define PSA_KEY_TYPE_ARC4                       ((psa_key_type_t)0x40000004)
+
+/** RSA public key. */
+#define PSA_KEY_TYPE_RSA_PUBLIC_KEY             ((psa_key_type_t)0x60010000)
+/** RSA key pair (private and public key). */
+#define PSA_KEY_TYPE_RSA_KEYPAIR                ((psa_key_type_t)0x70010000)
+/** Whether a key type is an RSA key (pair or public-only). */
+#define PSA_KEY_TYPE_IS_RSA(type)                                       \
+    (PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type) == PSA_KEY_TYPE_RSA_PUBLIC_KEY)
+
+/** DSA public key. */
+#define PSA_KEY_TYPE_DSA_PUBLIC_KEY             ((psa_key_type_t)0x60020000)
+/** DSA key pair (private and public key). */
+#define PSA_KEY_TYPE_DSA_KEYPAIR                ((psa_key_type_t)0x70020000)
+/** Whether a key type is an DSA key (pair or public-only). */
+#define PSA_KEY_TYPE_IS_DSA(type)                                       \
+    (PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type) == PSA_KEY_TYPE_DSA_PUBLIC_KEY)
+
+#define PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE        ((psa_key_type_t)0x60030000)
+#define PSA_KEY_TYPE_ECC_KEYPAIR_BASE           ((psa_key_type_t)0x70030000)
+#define PSA_KEY_TYPE_ECC_CURVE_MASK             ((psa_key_type_t)0x0000ffff)
+/** Elliptic curve key pair. */
+#define PSA_KEY_TYPE_ECC_KEYPAIR(curve)         \
+    (PSA_KEY_TYPE_ECC_KEYPAIR_BASE | (curve))
+/** Elliptic curve public key. */
+#define PSA_KEY_TYPE_ECC_PUBLIC_KEY(curve)              \
+    (PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE | (curve))
+
+/** Whether a key type is an elliptic curve key (pair or public-only). */
+#define PSA_KEY_TYPE_IS_ECC(type)                                       \
+    ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type) &                        \
+      ~PSA_KEY_TYPE_ECC_CURVE_MASK) == PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE)
+#define PSA_KEY_TYPE_IS_ECC_KEYPAIR(type)                               \
+    (((type) & ~PSA_KEY_TYPE_ECC_CURVE_MASK) ==                         \
+     PSA_KEY_TYPE_ECC_KEYPAIR_BASE)
+#define PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY(type)                            \
+    (((type) & ~PSA_KEY_TYPE_ECC_CURVE_MASK) ==                         \
+     PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE)
+
+/** Extract the curve from an elliptic curve key type. */
+#define PSA_KEY_TYPE_GET_CURVE(type)                             \
+    ((psa_ecc_curve_t) (PSA_KEY_TYPE_IS_ECC(type) ?              \
+                        ((type) & PSA_KEY_TYPE_ECC_CURVE_MASK) : \
+                        0))
+
+/* The encoding of curve identifiers is currently aligned with the
+ * TLS Supported Groups Registry (formerly known as the
+ * TLS EC Named Curve Registry)
+ * https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-parameters-8
+ * The values are defined by RFC 8422 and RFC 7027. */
+#define PSA_ECC_CURVE_SECT163K1         ((psa_ecc_curve_t) 0x0001)
+#define PSA_ECC_CURVE_SECT163R1         ((psa_ecc_curve_t) 0x0002)
+#define PSA_ECC_CURVE_SECT163R2         ((psa_ecc_curve_t) 0x0003)
+#define PSA_ECC_CURVE_SECT193R1         ((psa_ecc_curve_t) 0x0004)
+#define PSA_ECC_CURVE_SECT193R2         ((psa_ecc_curve_t) 0x0005)
+#define PSA_ECC_CURVE_SECT233K1         ((psa_ecc_curve_t) 0x0006)
+#define PSA_ECC_CURVE_SECT233R1         ((psa_ecc_curve_t) 0x0007)
+#define PSA_ECC_CURVE_SECT239K1         ((psa_ecc_curve_t) 0x0008)
+#define PSA_ECC_CURVE_SECT283K1         ((psa_ecc_curve_t) 0x0009)
+#define PSA_ECC_CURVE_SECT283R1         ((psa_ecc_curve_t) 0x000a)
+#define PSA_ECC_CURVE_SECT409K1         ((psa_ecc_curve_t) 0x000b)
+#define PSA_ECC_CURVE_SECT409R1         ((psa_ecc_curve_t) 0x000c)
+#define PSA_ECC_CURVE_SECT571K1         ((psa_ecc_curve_t) 0x000d)
+#define PSA_ECC_CURVE_SECT571R1         ((psa_ecc_curve_t) 0x000e)
+#define PSA_ECC_CURVE_SECP160K1         ((psa_ecc_curve_t) 0x000f)
+#define PSA_ECC_CURVE_SECP160R1         ((psa_ecc_curve_t) 0x0010)
+#define PSA_ECC_CURVE_SECP160R2         ((psa_ecc_curve_t) 0x0011)
+#define PSA_ECC_CURVE_SECP192K1         ((psa_ecc_curve_t) 0x0012)
+#define PSA_ECC_CURVE_SECP192R1         ((psa_ecc_curve_t) 0x0013)
+#define PSA_ECC_CURVE_SECP224K1         ((psa_ecc_curve_t) 0x0014)
+#define PSA_ECC_CURVE_SECP224R1         ((psa_ecc_curve_t) 0x0015)
+#define PSA_ECC_CURVE_SECP256K1         ((psa_ecc_curve_t) 0x0016)
+#define PSA_ECC_CURVE_SECP256R1         ((psa_ecc_curve_t) 0x0017)
+#define PSA_ECC_CURVE_SECP384R1         ((psa_ecc_curve_t) 0x0018)
+#define PSA_ECC_CURVE_SECP521R1         ((psa_ecc_curve_t) 0x0019)
+#define PSA_ECC_CURVE_BRAINPOOL_P256R1  ((psa_ecc_curve_t) 0x001a)
+#define PSA_ECC_CURVE_BRAINPOOL_P384R1  ((psa_ecc_curve_t) 0x001b)
+#define PSA_ECC_CURVE_BRAINPOOL_P512R1  ((psa_ecc_curve_t) 0x001c)
+#define PSA_ECC_CURVE_CURVE25519        ((psa_ecc_curve_t) 0x001d)
+#define PSA_ECC_CURVE_CURVE448          ((psa_ecc_curve_t) 0x001e)
+
+/** The block size of a block cipher.
+ *
+ * \param type  A cipher key type (value of type #psa_key_type_t).
+ *
+ * \return      The block size for a block cipher, or 1 for a stream cipher.
+ *              The return value is undefined if \p type is not a supported
+ *              cipher key type.
+ *
+ * \note It is possible to build stream cipher algorithms on top of a block
+ *       cipher, for example CTR mode (#PSA_ALG_CTR).
+ *       This macro only takes the key type into account, so it cannot be
+ *       used to determine the size of the data that #psa_cipher_update()
+ *       might buffer for future processing in general.
+ *
+ * \note This macro returns a compile-time constant if its argument is one.
+ *
+ * \warning This macro may evaluate its argument multiple times.
+ */
+#define PSA_BLOCK_CIPHER_BLOCK_SIZE(type)            \
+    (                                                \
+        (type) == PSA_KEY_TYPE_AES ? 16 :            \
+        (type) == PSA_KEY_TYPE_DES ? 8 :             \
+        (type) == PSA_KEY_TYPE_CAMELLIA ? 16 :       \
+        (type) == PSA_KEY_TYPE_ARC4 ? 1 :            \
+        0)
+
+#define PSA_ALG_VENDOR_FLAG                     ((psa_algorithm_t)0x80000000)
+#define PSA_ALG_CATEGORY_MASK                   ((psa_algorithm_t)0x7f000000)
+#define PSA_ALG_CATEGORY_HASH                   ((psa_algorithm_t)0x01000000)
+#define PSA_ALG_CATEGORY_MAC                    ((psa_algorithm_t)0x02000000)
+#define PSA_ALG_CATEGORY_CIPHER                 ((psa_algorithm_t)0x04000000)
+#define PSA_ALG_CATEGORY_AEAD                   ((psa_algorithm_t)0x06000000)
+#define PSA_ALG_CATEGORY_SIGN                   ((psa_algorithm_t)0x10000000)
+#define PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION  ((psa_algorithm_t)0x12000000)
+#define PSA_ALG_CATEGORY_KEY_AGREEMENT          ((psa_algorithm_t)0x22000000)
+#define PSA_ALG_CATEGORY_KEY_DERIVATION         ((psa_algorithm_t)0x30000000)
+#define PSA_ALG_CATEGORY_KEY_SELECTION          ((psa_algorithm_t)0x31000000)
+
+#define PSA_ALG_IS_VENDOR_DEFINED(alg)                                  \
+    (((alg) & PSA_ALG_VENDOR_FLAG) != 0)
+
+/** Whether the specified algorithm is a hash algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is a hash algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_HASH(alg)                                            \
+    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_HASH)
+
+/** Whether the specified algorithm is a MAC algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is a MAC algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_MAC(alg)                                             \
+    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_MAC)
+
+/** Whether the specified algorithm is a symmetric cipher algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is a symmetric cipher algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_CIPHER(alg)                                          \
+    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_CIPHER)
+
+/** Whether the specified algorithm is an authenticated encryption
+ * with associated data (AEAD) algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is an AEAD algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_AEAD(alg)                                            \
+    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_AEAD)
+
+/** Whether the specified algorithm is a public-key signature algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is a public-key signature algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_SIGN(alg)                                            \
+    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_SIGN)
+
+/** Whether the specified algorithm is a public-key encryption algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is a public-key encryption algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_ASYMMETRIC_ENCRYPTION(alg)                           \
+    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION)
+
+#define PSA_ALG_KEY_SELECTION_FLAG              ((psa_algorithm_t)0x01000000)
+/** Whether the specified algorithm is a key agreement algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is a key agreement algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_KEY_AGREEMENT(alg)                                   \
+    (((alg) & PSA_ALG_CATEGORY_MASK & ~PSA_ALG_KEY_SELECTION_FLAG) ==   \
+     PSA_ALG_CATEGORY_KEY_AGREEMENT)
+
+/** Whether the specified algorithm is a key derivation algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is a key derivation algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_KEY_DERIVATION(alg)                                  \
+    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_DERIVATION)
+
+/** Whether the specified algorithm is a key selection algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is a key selection algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_KEY_SELECTION(alg)                                   \
+    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_SELECTION)
+
+#define PSA_ALG_HASH_MASK                       ((psa_algorithm_t)0x000000ff)
+#define PSA_ALG_MD2                             ((psa_algorithm_t)0x01000001)
+#define PSA_ALG_MD4                             ((psa_algorithm_t)0x01000002)
+#define PSA_ALG_MD5                             ((psa_algorithm_t)0x01000003)
+#define PSA_ALG_RIPEMD160                       ((psa_algorithm_t)0x01000004)
+#define PSA_ALG_SHA_1                           ((psa_algorithm_t)0x01000005)
+/** SHA2-224 */
+#define PSA_ALG_SHA_224                         ((psa_algorithm_t)0x01000008)
+/** SHA2-256 */
+#define PSA_ALG_SHA_256                         ((psa_algorithm_t)0x01000009)
+/** SHA2-384 */
+#define PSA_ALG_SHA_384                         ((psa_algorithm_t)0x0100000a)
+/** SHA2-512 */
+#define PSA_ALG_SHA_512                         ((psa_algorithm_t)0x0100000b)
+/** SHA2-512/224 */
+#define PSA_ALG_SHA_512_224                     ((psa_algorithm_t)0x0100000c)
+/** SHA2-512/256 */
+#define PSA_ALG_SHA_512_256                     ((psa_algorithm_t)0x0100000d)
+/** SHA3-224 */
+#define PSA_ALG_SHA3_224                        ((psa_algorithm_t)0x01000010)
+/** SHA3-256 */
+#define PSA_ALG_SHA3_256                        ((psa_algorithm_t)0x01000011)
+/** SHA3-384 */
+#define PSA_ALG_SHA3_384                        ((psa_algorithm_t)0x01000012)
+/** SHA3-512 */
+#define PSA_ALG_SHA3_512                        ((psa_algorithm_t)0x01000013)
+
+#define PSA_ALG_MAC_SUBCATEGORY_MASK            ((psa_algorithm_t)0x00c00000)
+#define PSA_ALG_HMAC_BASE                       ((psa_algorithm_t)0x02800000)
+/** Macro to build an HMAC algorithm.
+ *
+ * For example, #PSA_ALG_HMAC(#PSA_ALG_SHA_256) is HMAC-SHA-256.
+ *
+ * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
+ *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
+ *
+ * \return              The corresponding HMAC algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      hash algorithm.
+ */
+#define PSA_ALG_HMAC(hash_alg)                                  \
+    (PSA_ALG_HMAC_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+
+#define PSA_ALG_HMAC_GET_HASH(hmac_alg)                             \
+    (PSA_ALG_CATEGORY_HASH | ((hmac_alg) & PSA_ALG_HASH_MASK))
+
+/** Whether the specified algorithm is an HMAC algorithm.
+ *
+ * HMAC is a family of MAC algorithms that are based on a hash function.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is an HMAC algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_HMAC(alg)                                            \
+    (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \
+     PSA_ALG_HMAC_BASE)
+
+/* In the encoding of a MAC algorithm, the bits corresponding to
+ * PSA_ALG_MAC_TRUNCATION_MASK encode the length to which the MAC is
+ * truncated. As an exception, the value 0 means the untruncated algorithm,
+ * whatever its length is. The length is encoded in 6 bits, so it can
+ * reach up to 63; the largest MAC is 64 bytes so its trivial truncation
+ * to full length is correctly encoded as 0 and any non-trivial truncation
+ * is correctly encoded as a value between 1 and 63. */
+#define PSA_ALG_MAC_TRUNCATION_MASK             ((psa_algorithm_t)0x00003f00)
+#define PSA_MAC_TRUNCATION_OFFSET 8
+
+/** Macro to build a truncated MAC algorithm.
+ *
+ * A truncated MAC algorithm is identical to the corresponding MAC
+ * algorithm except that the MAC value for the truncated algorithm
+ * consists of only the first \p mac_length bytes of the MAC value
+ * for the untruncated algorithm.
+ *
+ * \note    This macro may allow constructing algorithm identifiers that
+ *          are not valid, either because the specified length is larger
+ *          than the untruncated MAC or because the specified length is
+ *          smaller than permitted by the implementation.
+ *
+ * \note    It is implementation-defined whether a truncated MAC that
+ *          is truncated to the same length as the MAC of the untruncated
+ *          algorithm is considered identical to the untruncated algorithm
+ *          for policy comparison purposes.
+ *
+ * \param alg           A MAC algorithm identifier (value of type
+ *                      #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p alg)
+ *                      is true). This may be a truncated or untruncated
+ *                      MAC algorithm.
+ * \param mac_length    Desired length of the truncated MAC in bytes.
+ *                      This must be at most the full length of the MAC
+ *                      and must be at least an implementation-specified
+ *                      minimum. The implementation-specified minimum
+ *                      shall not be zero.
+ *
+ * \return              The corresponding MAC algorithm with the specified
+ *                      length.
+ * \return              Unspecified if \p alg is not a supported
+ *                      MAC algorithm or if \p mac_length is too small or
+ *                      too large for the specified MAC algorithm.
+ */
+#define PSA_ALG_TRUNCATED_MAC(alg, mac_length)                          \
+    (((alg) & ~PSA_ALG_MAC_TRUNCATION_MASK) |                           \
+     ((mac_length) << PSA_MAC_TRUNCATION_OFFSET & PSA_ALG_MAC_TRUNCATION_MASK))
+
+/** Macro to build the base MAC algorithm corresponding to a truncated
+ * MAC algorithm.
+ *
+ * \param alg           A MAC algorithm identifier (value of type
+ *                      #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p alg)
+ *                      is true). This may be a truncated or untruncated
+ *                      MAC algorithm.
+ *
+ * \return              The corresponding base MAC algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      MAC algorithm.
+ */
+#define PSA_ALG_FULL_LENGTH_MAC(alg)            \
+    ((alg) & ~PSA_ALG_MAC_TRUNCATION_MASK)
+
+/** Length to which a MAC algorithm is truncated.
+ *
+ * \param alg           A MAC algorithm identifier (value of type
+ *                      #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p alg)
+ *                      is true).
+ *
+ * \return              Length of the truncated MAC in bytes.
+ * \return              0 if \p alg is a non-truncated MAC algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      MAC algorithm.
+ */
+#define PSA_MAC_TRUNCATED_LENGTH(alg)           \
+    (((alg) & PSA_ALG_MAC_TRUNCATION_MASK) >> PSA_MAC_TRUNCATION_OFFSET)
+
+#define PSA_ALG_CIPHER_MAC_BASE                 ((psa_algorithm_t)0x02c00000)
+#define PSA_ALG_CBC_MAC                         ((psa_algorithm_t)0x02c00001)
+#define PSA_ALG_CMAC                            ((psa_algorithm_t)0x02c00002)
+#define PSA_ALG_GMAC                            ((psa_algorithm_t)0x02c00003)
+
+/** Whether the specified algorithm is a MAC algorithm based on a block cipher.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is a MAC algorithm based on a block cipher, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier.
+ */
+#define PSA_ALG_IS_BLOCK_CIPHER_MAC(alg)                                \
+    (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \
+     PSA_ALG_CIPHER_MAC_BASE)
+
+#define PSA_ALG_CIPHER_STREAM_FLAG              ((psa_algorithm_t)0x00800000)
+#define PSA_ALG_CIPHER_FROM_BLOCK_FLAG          ((psa_algorithm_t)0x00400000)
+
+/** Whether the specified algorithm is a stream cipher.
+ *
+ * A stream cipher is a symmetric cipher that encrypts or decrypts messages
+ * by applying a bitwise-xor with a stream of bytes that is generated
+ * from a key.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \p alg is a stream cipher algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \p alg is not a supported
+ *         algorithm identifier or if it is not a symmetric cipher algorithm.
+ */
+#define PSA_ALG_IS_STREAM_CIPHER(alg)            \
+    (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_CIPHER_STREAM_FLAG)) == \
+        (PSA_ALG_CATEGORY_CIPHER | PSA_ALG_CIPHER_STREAM_FLAG))
+
+/** The ARC4 stream cipher algorithm.
+ */
+#define PSA_ALG_ARC4                            ((psa_algorithm_t)0x04800001)
+
+/** The CTR stream cipher mode.
+ *
+ * CTR is a stream cipher which is built from a block cipher.
+ * The underlying block cipher is determined by the key type.
+ * For example, to use AES-128-CTR, use this algorithm with
+ * a key of type #PSA_KEY_TYPE_AES and a length of 128 bits (16 bytes).
+ */
+#define PSA_ALG_CTR                             ((psa_algorithm_t)0x04c00001)
+
+#define PSA_ALG_CFB                             ((psa_algorithm_t)0x04c00002)
+
+#define PSA_ALG_OFB                             ((psa_algorithm_t)0x04c00003)
+
+/** The XTS cipher mode.
+ *
+ * XTS is a cipher mode which is built from a block cipher. It requires at
+ * least one full block of input, but beyond this minimum the input
+ * does not need to be a whole number of blocks.
+ */
+#define PSA_ALG_XTS                             ((psa_algorithm_t)0x044000ff)
+
+/** The CBC block cipher chaining mode, with no padding.
+ *
+ * The underlying block cipher is determined by the key type.
+ *
+ * This symmetric cipher mode can only be used with messages whose lengths
+ * are whole number of blocks for the chosen block cipher.
+ */
+#define PSA_ALG_CBC_NO_PADDING                  ((psa_algorithm_t)0x04600100)
+
+/** The CBC block cipher chaining mode with PKCS#7 padding.
+ *
+ * The underlying block cipher is determined by the key type.
+ *
+ * This is the padding method defined by PKCS#7 (RFC 2315) &sect;10.3.
+ */
+#define PSA_ALG_CBC_PKCS7                       ((psa_algorithm_t)0x04600101)
+
+#define PSA_ALG_CCM                             ((psa_algorithm_t)0x06001001)
+#define PSA_ALG_GCM                             ((psa_algorithm_t)0x06001002)
+
+/* In the encoding of a AEAD algorithm, the bits corresponding to
+ * PSA_ALG_AEAD_TAG_LENGTH_MASK encode the length of the AEAD tag.
+ * The constants for default lengths follow this encoding.
+ */
+#define PSA_ALG_AEAD_TAG_LENGTH_MASK            ((psa_algorithm_t)0x00003f00)
+#define PSA_AEAD_TAG_LENGTH_OFFSET 8
+
+/** Macro to build a shortened AEAD algorithm.
+ *
+ * A shortened AEAD algorithm is similar to the corresponding AEAD
+ * algorithm, but has an authentication tag that consists of fewer bytes.
+ * Depending on the algorithm, the tag length may affect the calculation
+ * of the ciphertext.
+ *
+ * \param alg           A AEAD algorithm identifier (value of type
+ *                      #psa_algorithm_t such that #PSA_ALG_IS_AEAD(\p alg)
+ *                      is true).
+ * \param tag_length    Desired length of the authentication tag in bytes.
+ *
+ * \return              The corresponding AEAD algorithm with the specified
+ *                      length.
+ * \return              Unspecified if \p alg is not a supported
+ *                      AEAD algorithm or if \p tag_length is not valid
+ *                      for the specified AEAD algorithm.
+ */
+#define PSA_ALG_AEAD_WITH_TAG_LENGTH(alg, tag_length)                   \
+    (((alg) & ~PSA_ALG_AEAD_TAG_LENGTH_MASK) |                          \
+     ((tag_length) << PSA_AEAD_TAG_LENGTH_OFFSET &                      \
+      PSA_ALG_AEAD_TAG_LENGTH_MASK))
+
+/** Calculate the corresponding AEAD algorithm with the default tag length.
+ *
+ * \param alg   An AEAD algorithm (\c PSA_ALG_XXX value such that
+ *              #PSA_ALG_IS_AEAD(\p alg) is true).
+ *
+ * \return      The corresponding AEAD algorithm with the default tag length
+ *              for that algorithm.
+ */
+#define PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH(alg)                       \
+    (                                                                   \
+        PSA__ALG_AEAD_WITH_DEFAULT_TAG_LENGTH__CASE(alg, PSA_ALG_CCM)   \
+        PSA__ALG_AEAD_WITH_DEFAULT_TAG_LENGTH__CASE(alg, PSA_ALG_GCM)   \
+        0)
+#define PSA__ALG_AEAD_WITH_DEFAULT_TAG_LENGTH__CASE(alg, ref) \
+    PSA_ALG_AEAD_WITH_TAG_LENGTH(alg, 0) == \
+    PSA_ALG_AEAD_WITH_TAG_LENGTH(ref, 0) ?  \
+    ref :
+
+#define PSA_ALG_RSA_PKCS1V15_SIGN_BASE          ((psa_algorithm_t)0x10020000)
+/** RSA PKCS#1 v1.5 signature with hashing.
+ *
+ * This is the signature scheme defined by RFC 8017
+ * (PKCS#1: RSA Cryptography Specifications) under the name
+ * RSASSA-PKCS1-v1_5.
+ *
+ * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
+ *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
+ *
+ * \return              The corresponding RSA PKCS#1 v1.5 signature algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      hash algorithm.
+ */
+#define PSA_ALG_RSA_PKCS1V15_SIGN(hash_alg)                             \
+    (PSA_ALG_RSA_PKCS1V15_SIGN_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+/** Raw PKCS#1 v1.5 signature.
+ *
+ * The input to this algorithm is the DigestInfo structure used by
+ * RFC 8017 (PKCS#1: RSA Cryptography Specifications), &sect;9.2
+ * steps 3&ndash;6.
+ */
+#define PSA_ALG_RSA_PKCS1V15_SIGN_RAW PSA_ALG_RSA_PKCS1V15_SIGN_BASE
+#define PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg)                               \
+    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PKCS1V15_SIGN_BASE)
+
+#define PSA_ALG_RSA_PSS_BASE               ((psa_algorithm_t)0x10030000)
+/** RSA PSS signature with hashing.
+ *
+ * This is the signature scheme defined by RFC 8017
+ * (PKCS#1: RSA Cryptography Specifications) under the name
+ * RSASSA-PSS, with the message generation function MGF1, and with
+ * a salt length equal to the length of the hash. The specified
+ * hash algorithm is used to hash the input message, to create the
+ * salted hash, and for the mask generation.
+ *
+ * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
+ *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
+ *
+ * \return              The corresponding RSA PSS signature algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      hash algorithm.
+ */
+#define PSA_ALG_RSA_PSS(hash_alg)                               \
+    (PSA_ALG_RSA_PSS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+#define PSA_ALG_IS_RSA_PSS(alg)                                 \
+    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PSS_BASE)
+
+#define PSA_ALG_DSA_BASE                        ((psa_algorithm_t)0x10040000)
+/** DSA signature with hashing.
+ *
+ * This is the signature scheme defined by FIPS 186-4,
+ * with a random per-message secret number (*k*).
+ *
+ * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
+ *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
+ *
+ * \return              The corresponding DSA signature algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      hash algorithm.
+ */
+#define PSA_ALG_DSA(hash_alg)                             \
+    (PSA_ALG_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+#define PSA_ALG_DETERMINISTIC_DSA_BASE          ((psa_algorithm_t)0x10050000)
+#define PSA_ALG_DSA_DETERMINISTIC_FLAG          ((psa_algorithm_t)0x00010000)
+#define PSA_ALG_DETERMINISTIC_DSA(hash_alg)                             \
+    (PSA_ALG_DETERMINISTIC_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+#define PSA_ALG_IS_DSA(alg)                                             \
+    (((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_DSA_DETERMINISTIC_FLAG) ==  \
+     PSA_ALG_DSA_BASE)
+#define PSA_ALG_DSA_IS_DETERMINISTIC(alg)               \
+    (((alg) & PSA_ALG_DSA_DETERMINISTIC_FLAG) != 0)
+#define PSA_ALG_IS_DETERMINISTIC_DSA(alg)                       \
+    (PSA_ALG_IS_DSA(alg) && PSA_ALG_DSA_IS_DETERMINISTIC(alg))
+#define PSA_ALG_IS_RANDOMIZED_DSA(alg)                          \
+    (PSA_ALG_IS_DSA(alg) && !PSA_ALG_DSA_IS_DETERMINISTIC(alg))
+
+#define PSA_ALG_ECDSA_BASE                      ((psa_algorithm_t)0x10060000)
+/** ECDSA signature with hashing.
+ *
+ * This is the ECDSA signature scheme defined by ANSI X9.62,
+ * with a random per-message secret number (*k*).
+ *
+ * The representation of the signature as a byte string consists of
+ * the concatentation of the signature values *r* and *s*. Each of
+ * *r* and *s* is encoded as an *N*-octet string, where *N* is the length
+ * of the base point of the curve in octets. Each value is represented
+ * in big-endian order (most significant octet first).
+ *
+ * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
+ *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
+ *
+ * \return              The corresponding ECDSA signature algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      hash algorithm.
+ */
+#define PSA_ALG_ECDSA(hash_alg)                                 \
+    (PSA_ALG_ECDSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+/** ECDSA signature without hashing.
+ *
+ * This is the same signature scheme as #PSA_ALG_ECDSA(), but
+ * without specifying a hash algorithm. This algorithm may only be
+ * used to sign or verify a sequence of bytes that should be an
+ * already-calculated hash. Note that the input is padded with
+ * zeros on the left or truncated on the left as required to fit
+ * the curve size.
+ */
+#define PSA_ALG_ECDSA_ANY PSA_ALG_ECDSA_BASE
+#define PSA_ALG_DETERMINISTIC_ECDSA_BASE        ((psa_algorithm_t)0x10070000)
+/** Deterministic ECDSA signature with hashing.
+ *
+ * This is the deterministic ECDSA signature scheme defined by RFC 6979.
+ *
+ * The representation of a signature is the same as with #PSA_ALG_ECDSA().
+ *
+ * Note that when this algorithm is used for verification, signatures
+ * made with randomized ECDSA (#PSA_ALG_ECDSA(\p hash_alg)) with the
+ * same private key are accepted. In other words,
+ * #PSA_ALG_DETERMINISTIC_ECDSA(\p hash_alg) differs from
+ * #PSA_ALG_ECDSA(\p hash_alg) only for signature, not for verification.
+ *
+ * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
+ *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
+ *
+ * \return              The corresponding deterministic ECDSA signature
+ *                      algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      hash algorithm.
+ */
+#define PSA_ALG_DETERMINISTIC_ECDSA(hash_alg)                           \
+    (PSA_ALG_DETERMINISTIC_ECDSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+#define PSA_ALG_IS_ECDSA(alg)                                           \
+    (((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_DSA_DETERMINISTIC_FLAG) ==  \
+     PSA_ALG_ECDSA_BASE)
+#define PSA_ALG_ECDSA_IS_DETERMINISTIC(alg)             \
+    (((alg) & PSA_ALG_DSA_DETERMINISTIC_FLAG) != 0)
+#define PSA_ALG_IS_DETERMINISTIC_ECDSA(alg)                             \
+    (PSA_ALG_IS_ECDSA(alg) && PSA_ALG_ECDSA_IS_DETERMINISTIC(alg))
+#define PSA_ALG_IS_RANDOMIZED_ECDSA(alg)                                \
+    (PSA_ALG_IS_ECDSA(alg) && !PSA_ALG_ECDSA_IS_DETERMINISTIC(alg))
+
+/** Get the hash used by a hash-and-sign signature algorithm.
+ *
+ * A hash-and-sign algorithm is a signature algorithm which is
+ * composed of two phases: first a hashing phase which does not use
+ * the key and produces a hash of the input message, then a signing
+ * phase which only uses the hash and the key and not the message
+ * itself.
+ *
+ * \param alg   A signature algorithm (\c PSA_ALG_XXX value such that
+ *              #PSA_ALG_IS_SIGN(\p alg) is true).
+ *
+ * \return      The underlying hash algorithm if \p alg is a hash-and-sign
+ *              algorithm.
+ * \return      0 if \p alg is a signature algorithm that does not
+ *              follow the hash-and-sign structure.
+ * \return      Unspecified if \p alg is not a signature algorithm or
+ *              if it is not supported by the implementation.
+ */
+#define PSA_ALG_SIGN_GET_HASH(alg)                                     \
+    (PSA_ALG_IS_RSA_PSS(alg) || PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg) ||   \
+     PSA_ALG_IS_DSA(alg) || PSA_ALG_IS_ECDSA(alg) ?                    \
+     ((alg) & PSA_ALG_HASH_MASK) == 0 ? /*"raw" algorithm*/ 0 :        \
+     ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH :             \
+     0)
+
+/** RSA PKCS#1 v1.5 encryption.
+ */
+#define PSA_ALG_RSA_PKCS1V15_CRYPT              ((psa_algorithm_t)0x12020000)
+
+#define PSA_ALG_RSA_OAEP_BASE                   ((psa_algorithm_t)0x12030000)
+/** RSA OAEP encryption.
+ *
+ * This is the encryption scheme defined by RFC 8017
+ * (PKCS#1: RSA Cryptography Specifications) under the name
+ * RSAES-OAEP, with the message generation function MGF1.
+ *
+ * \param hash_alg      The hash algorithm (\c PSA_ALG_XXX value such that
+ *                      #PSA_ALG_IS_HASH(\p hash_alg) is true) to use
+ *                      for MGF1.
+ *
+ * \return              The corresponding RSA OAEP signature algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      hash algorithm.
+ */
+#define PSA_ALG_RSA_OAEP(hash_alg)                              \
+    (PSA_ALG_RSA_OAEP_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+#define PSA_ALG_IS_RSA_OAEP(alg)                                \
+    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_OAEP_BASE)
+#define PSA_ALG_RSA_OAEP_GET_HASH(alg)                          \
+    (PSA_ALG_IS_RSA_OAEP(alg) ?                                 \
+     ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH :      \
+     0)
+
+#define PSA_ALG_HKDF_BASE                       ((psa_algorithm_t)0x30000100)
+/** Macro to build an HKDF algorithm.
+ *
+ * For example, `PSA_ALG_HKDF(PSA_ALG_SHA256)` is HKDF using HMAC-SHA-256.
+ *
+ * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
+ *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
+ *
+ * \return              The corresponding HKDF algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      hash algorithm.
+ */
+#define PSA_ALG_HKDF(hash_alg)                                  \
+    (PSA_ALG_HKDF_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+/** Whether the specified algorithm is an HKDF algorithm.
+ *
+ * HKDF is a family of key derivation algorithms that are based on a hash
+ * function and the HMAC construction.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \c alg is an HKDF algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \c alg is not a supported
+ *         key derivation algorithm identifier.
+ */
+#define PSA_ALG_IS_HKDF(alg)                            \
+    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HKDF_BASE)
+#define PSA_ALG_HKDF_GET_HASH(hkdf_alg)                         \
+    (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK))
+
+#define PSA_ALG_TLS12_PRF_BASE                     ((psa_algorithm_t)0x30000200)
+/** Macro to build a TLS-1.2 PRF algorithm.
+ *
+ * TLS 1.2 uses a custom pseudorandom function (PRF) for key schedule,
+ * specified in Section 5 of RFC 5246. It is based on HMAC and can be
+ * used with either SHA-256 or SHA-384.
+ *
+ * For the application to TLS-1.2, the salt and label arguments passed
+ * to psa_key_derivation() are what's called 'seed' and 'label' in RFC 5246,
+ * respectively. For example, for TLS key expansion, the salt is the
+ * concatenation of ServerHello.Random + ClientHello.Random,
+ * while the label is "key expansion".
+ *
+ * For example, `PSA_ALG_TLS12_PRF(PSA_ALG_SHA256)` represents the
+ * TLS 1.2 PRF using HMAC-SHA-256.
+ *
+ * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
+ *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
+ *
+ * \return              The corresponding TLS-1.2 PRF algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      hash algorithm.
+ */
+#define PSA_ALG_TLS12_PRF(hash_alg)                                  \
+    (PSA_ALG_TLS12_PRF_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+
+/** Whether the specified algorithm is a TLS-1.2 PRF algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \c alg is a TLS-1.2 PRF algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \c alg is not a supported
+ *         key derivation algorithm identifier.
+ */
+#define PSA_ALG_IS_TLS12_PRF(alg)                                    \
+    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_TLS12_PRF_BASE)
+#define PSA_ALG_TLS12_PRF_GET_HASH(hkdf_alg)                         \
+    (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK))
+
+#define PSA_ALG_TLS12_PSK_TO_MS_BASE ((psa_algorithm_t)0x30000300)
+/** Macro to build a TLS-1.2 PSK-to-MasterSecret algorithm.
+ *
+ * In a pure-PSK handshake in TLS 1.2, the master secret is derived
+ * from the PreSharedKey (PSK) through the application of padding
+ * (RFC 4279, Section 2) and the TLS-1.2 PRF (RFC 5246, Section 5).
+ * The latter is based on HMAC and can be used with either SHA-256
+ * or SHA-384.
+ *
+ * For the application to TLS-1.2, the salt passed to psa_key_derivation()
+ * (and forwarded to the TLS-1.2 PRF) is the concatenation of the
+ * ClientHello.Random + ServerHello.Random, while the label is "master secret"
+ * or "extended master secret".
+ *
+ * For example, `PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA256)` represents the
+ * TLS-1.2 PSK to MasterSecret derivation PRF using HMAC-SHA-256.
+ *
+ * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
+ *                      #PSA_ALG_IS_HASH(\p hash_alg) is true).
+ *
+ * \return              The corresponding TLS-1.2 PSK to MS algorithm.
+ * \return              Unspecified if \p alg is not a supported
+ *                      hash algorithm.
+ */
+#define PSA_ALG_TLS12_PSK_TO_MS(hash_alg)                                  \
+    (PSA_ALG_TLS12_PSK_TO_MS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
+
+/** Whether the specified algorithm is a TLS-1.2 PSK to MS algorithm.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \c alg is a TLS-1.2 PSK to MS algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \c alg is not a supported
+ *         key derivation algorithm identifier.
+ */
+#define PSA_ALG_IS_TLS12_PSK_TO_MS(alg)                                    \
+    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_TLS12_PSK_TO_MS_BASE)
+#define PSA_ALG_TLS12_PSK_TO_MS_GET_HASH(hkdf_alg)                         \
+    (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK))
+
+#define PSA_ALG_KEY_DERIVATION_MASK             ((psa_algorithm_t)0x010fffff)
+
+/** Use a shared secret as is.
+ *
+ * Specify this algorithm as the selection component of a key agreement
+ * to use the raw result of the key agreement as key material.
+ *
+ * \warning The raw result of a key agreement algorithm such as finite-field
+ * Diffie-Hellman or elliptic curve Diffie-Hellman has biases and should
+ * not be used directly as key material. It can however be used as the secret
+ * input in a key derivation algorithm.
+ */
+#define PSA_ALG_SELECT_RAW                      ((psa_algorithm_t)0x31000001)
+
+#define PSA_ALG_KEY_AGREEMENT_GET_KDF(alg)                              \
+    (((alg) & PSA_ALG_KEY_DERIVATION_MASK) | PSA_ALG_CATEGORY_KEY_DERIVATION)
+
+#define PSA_ALG_KEY_AGREEMENT_GET_BASE(alg)                              \
+    ((alg) & ~PSA_ALG_KEY_DERIVATION_MASK)
+
+#define PSA_ALG_FFDH_BASE                       ((psa_algorithm_t)0x22100000)
+/** The Diffie-Hellman key agreement algorithm.
+ *
+ * This algorithm combines the finite-field Diffie-Hellman (DH) key
+ * agreement, also known as Diffie-Hellman-Merkle (DHM) key agreement,
+ * to produce a shared secret from a private key and the peer's
+ * public key, with a key selection or key derivation algorithm to produce
+ * one or more shared keys and other shared cryptographic material.
+ *
+ * The shared secret produced by key agreement and passed as input to the
+ * derivation or selection algorithm \p kdf_alg is the shared secret
+ * `g^{ab}` in big-endian format.
+ * It is `ceiling(m / 8)` bytes long where `m` is the size of the prime `p`
+ * in bits.
+ *
+ * \param kdf_alg       A key derivation algorithm (\c PSA_ALG_XXX value such
+ *                      that #PSA_ALG_IS_KEY_DERIVATION(\p hash_alg) is true)
+ *                      or a key selection algorithm (\c PSA_ALG_XXX value such
+ *                      that #PSA_ALG_IS_KEY_SELECTION(\p hash_alg) is true).
+ *
+ * \return              The Diffie-Hellman algorithm with the specified
+ *                      selection or derivation algorithm.
+ */
+#define PSA_ALG_FFDH(kdf_alg) \
+    (PSA_ALG_FFDH_BASE | ((kdf_alg) & PSA_ALG_KEY_DERIVATION_MASK))
+/** Whether the specified algorithm is a finite field Diffie-Hellman algorithm.
+ *
+ * This includes every supported key selection or key agreement algorithm
+ * for the output of the Diffie-Hellman calculation.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \c alg is a finite field Diffie-Hellman algorithm, 0 otherwise.
+ *         This macro may return either 0 or 1 if \c alg is not a supported
+ *         key agreement algorithm identifier.
+ */
+#define PSA_ALG_IS_FFDH(alg) \
+    (PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) == PSA_ALG_FFDH_BASE)
+
+#define PSA_ALG_ECDH_BASE                       ((psa_algorithm_t)0x22200000)
+/** The elliptic curve Diffie-Hellman (ECDH) key agreement algorithm.
+ *
+ * This algorithm combines the elliptic curve Diffie-Hellman key
+ * agreement to produce a shared secret from a private key and the peer's
+ * public key, with a key selection or key derivation algorithm to produce
+ * one or more shared keys and other shared cryptographic material.
+ *
+ * The shared secret produced by key agreement and passed as input to the
+ * derivation or selection algorithm \p kdf_alg is the x-coordinate of
+ * the shared secret point. It is always `ceiling(m / 8)` bytes long where
+ * `m` is the bit size associated with the curve, i.e. the bit size of the
+ * order of the curve's coordinate field. When `m` is not a multiple of 8,
+ * the byte containing the most significant bit of the shared secret
+ * is padded with zero bits. The byte order is either little-endian
+ * or big-endian depending on the curve type.
+ *
+ * - For Montgomery curves (curve types `PSA_ECC_CURVE_CURVEXXX`),
+ *   the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A`
+ *   in little-endian byte order.
+ *   The bit size is 448 for Curve448 and 255 for Curve25519.
+ * - For Weierstrass curves over prime fields (curve types
+ *   `PSA_ECC_CURVE_SECPXXX` and `PSA_ECC_CURVE_BRAINPOOL_PXXX`),
+ *   the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A`
+ *   in big-endian byte order.
+ *   The bit size is `m = ceiling(log_2(p))` for the field `F_p`.
+ * - For Weierstrass curves over binary fields (curve types
+ *   `PSA_ECC_CURVE_SECTXXX`),
+ *   the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A`
+ *   in big-endian byte order.
+ *   The bit size is `m` for the field `F_{2^m}`.
+ *
+ * \param kdf_alg       A key derivation algorithm (\c PSA_ALG_XXX value such
+ *                      that #PSA_ALG_IS_KEY_DERIVATION(\p hash_alg) is true)
+ *                      or a selection algorithm (\c PSA_ALG_XXX value such
+ *                      that #PSA_ALG_IS_KEY_SELECTION(\p hash_alg) is true).
+ *
+ * \return              The Diffie-Hellman algorithm with the specified
+ *                      selection or derivation algorithm.
+ */
+#define PSA_ALG_ECDH(kdf_alg) \
+    (PSA_ALG_ECDH_BASE | ((kdf_alg) & PSA_ALG_KEY_DERIVATION_MASK))
+/** Whether the specified algorithm is an elliptic curve Diffie-Hellman
+ * algorithm.
+ *
+ * This includes every supported key selection or key agreement algorithm
+ * for the output of the Diffie-Hellman calculation.
+ *
+ * \param alg An algorithm identifier (value of type #psa_algorithm_t).
+ *
+ * \return 1 if \c alg is an elliptic curve Diffie-Hellman algorithm,
+ *         0 otherwise.
+ *         This macro may return either 0 or 1 if \c alg is not a supported
+ *         key agreement algorithm identifier.
+ */
+#define PSA_ALG_IS_ECDH(alg) \
+    (PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) == PSA_ALG_ECDH_BASE)
+
+/**@}*/
+
+/** \defgroup key_lifetimes Key lifetimes
+ * @{
+ */
+
+/** A volatile key only exists as long as the handle to it is not closed.
+ * The key material is guaranteed to be erased on a power reset.
+ */
+#define PSA_KEY_LIFETIME_VOLATILE               ((psa_key_lifetime_t)0x00000000)
+
+/** The default storage area for persistent keys.
+ *
+ * A persistent key remains in storage until it is explicitly destroyed or
+ * until the corresponding storage area is wiped. This specification does
+ * not define any mechanism to wipe a storage area, but implementations may
+ * provide their own mechanism (for example to perform a factory reset,
+ * to prepare for device refurbishment, or to uninstall an application).
+ *
+ * This lifetime value is the default storage area for the calling
+ * application. Implementations may offer other storage areas designated
+ * by other lifetime values as implementation-specific extensions.
+ */
+#define PSA_KEY_LIFETIME_PERSISTENT             ((psa_key_lifetime_t)0x00000001)
+
+/**@}*/
+
+/** \defgroup policy Key policies
+ * @{
+ */
+
+/** Whether the key may be exported.
+ *
+ * A public key or the public part of a key pair may always be exported
+ * regardless of the value of this permission flag.
+ *
+ * If a key does not have export permission, implementations shall not
+ * allow the key to be exported in plain form from the cryptoprocessor,
+ * whether through psa_export_key() or through a proprietary interface.
+ * The key may however be exportable in a wrapped form, i.e. in a form
+ * where it is encrypted by another key.
+ */
+#define PSA_KEY_USAGE_EXPORT                    ((psa_key_usage_t)0x00000001)
+
+/** Whether the key may be used to encrypt a message.
+ *
+ * This flag allows the key to be used for a symmetric encryption operation,
+ * for an AEAD encryption-and-authentication operation,
+ * or for an asymmetric encryption operation,
+ * if otherwise permitted by the key's type and policy.
+ *
+ * For a key pair, this concerns the public key.
+ */
+#define PSA_KEY_USAGE_ENCRYPT                   ((psa_key_usage_t)0x00000100)
+
+/** Whether the key may be used to decrypt a message.
+ *
+ * This flag allows the key to be used for a symmetric decryption operation,
+ * for an AEAD decryption-and-verification operation,
+ * or for an asymmetric decryption operation,
+ * if otherwise permitted by the key's type and policy.
+ *
+ * For a key pair, this concerns the private key.
+ */
+#define PSA_KEY_USAGE_DECRYPT                   ((psa_key_usage_t)0x00000200)
+
+/** Whether the key may be used to sign a message.
+ *
+ * This flag allows the key to be used for a MAC calculation operation
+ * or for an asymmetric signature operation,
+ * if otherwise permitted by the key's type and policy.
+ *
+ * For a key pair, this concerns the private key.
+ */
+#define PSA_KEY_USAGE_SIGN                      ((psa_key_usage_t)0x00000400)
+
+/** Whether the key may be used to verify a message signature.
+ *
+ * This flag allows the key to be used for a MAC verification operation
+ * or for an asymmetric signature verification operation,
+ * if otherwise permitted by by the key's type and policy.
+ *
+ * For a key pair, this concerns the public key.
+ */
+#define PSA_KEY_USAGE_VERIFY                    ((psa_key_usage_t)0x00000800)
+
+/** Whether the key may be used to derive other keys.
+ */
+#define PSA_KEY_USAGE_DERIVE                    ((psa_key_usage_t)0x00001000)
+
+/**@}*/
+
+#endif /* PSA_CRYPTO_VALUES_H */