diff --git a/docs/use-psa-crypto.md b/docs/use-psa-crypto.md
index a4f43b7..d1298af 100644
--- a/docs/use-psa-crypto.md
+++ b/docs/use-psa-crypto.md
@@ -5,10 +5,148 @@
 Current effects
 ===============
 
-(To be written.)
+General limitations
+-------------------
 
-Parts that are not affected yet
-===============================
+Compile-time: enabling `MBEDTLS_USE_PSA_CRYPTO` requires
+`MBEDTLS_ECP_RESTARTABLE` and
+`MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER` to be disabled.
+
+Effect: `MBEDTLS_USE_PSA_CRYPTO` currently has no effect on TLS 1.3 (which is
+itself experimental and only partially supported so far): TLS 1.3 always uses
+the legacy APIs even when this option is set.
+
+Stability: any API that's only available when `MBEDTLS_USE_PSA_CRYPTO` is
+defined is considered experimental and may change in incompatible ways at any
+time. Said otherwise, these APIs are explicitly excluded from the usual API
+stability promises.
+
+New APIs / API extensions
+-------------------------
+
+Some of these APIs are meant for the application to use in place of
+pre-existing APIs, in order to get access to the benefits; in the sub-sections
+below these are indicated by "Use in (X.509 and) TLS: opt-in", meaning that
+this requires changes to the application code for the (X.509 and) TLS layers
+to pick up the improvements.
+
+Some of these APIs are mostly meant for internal use by the TLS (and X.509)
+layers; they are indicated below by "Use in (X.509 and) TLS: automatic",
+meaning that no changes to the application code are required for the TLS (and
+X.509) layers to pick up the improvements.
+
+### PSA-held (opaque) keys in the PK layer
+
+Add `mbedtls_pk_setup_opaque()` to wrap a PSA keypair into a PK context. The key
+can be used for private-key operations and its public part can be written out.
+
+Benefits: isolation of long-term secrets, use of PSA Crypto drivers.
+
+Limitations: only for private keys, only ECC. (That is, only ECDSA signature
+generation.) The following operations are not supported with a context set
+this way, while they would be available with a normal `ECKEY` context:
+`mbedtls_pk_verify()`, `mbedtls_pk_check_pair()`, `mbedtls_pk_debug()`.
+
+Use in X.509 and TLS: opt-in. The application needs to construct the PK context
+using the new API in order to get the benefits; it can then pass the
+resulting context to the following existing APIs:
+
+- `mbedtls_ssl_conf_own_cert()` or `mbedtls_ssl_set_hs_own_cert()` to use the
+  key together with a certificate for ECDSA-based key exchanges;
+- `mbedtls_x509write_csr_set_key()` to generate a CSR (certificate signature
+  request).
+
+In the TLS and X.509 API, there's two other function which accept a key or
+keypair as a PK context: `mbedtls_x509write_crt_set_subject_key()` and
+`mbedtls_x509write_crt_set_issuer_key()`. Use of opaque contexts here probably
+works but is so far untested.
+
+### PSA-held (opaque) keys for TLS 1.2 pre-shared keys (PSK)
+
+Add `mbedtls_ssl_conf_psk_opaque()` and `mbedtls_ssl_set_hs_psk_opaque()` to
+register a PSA key for use with a PSK key exchange.
+
+Benefits: isolation of long-term secrets.
+
+Limitations: the key can only be used with with TLS 1.2, and only with "pure"
+PSK key exchanges (ciphersuites starting with `TLS_PSK_WITH_`), to the
+exclusion of RSA-PSK, DHE-PSK and ECDHE-PSK key exchanges. It is the responsibility of
+the user to make sure that when provisioning an opaque pre-shared key, the
+only PSK ciphersuites that can be negotiated are "pure" PSK; other XXX-PSK key
+exchanges will result in a handshake failure with the handshake function
+returning `MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE`.
+
+Use in TLS: opt-in. The application needs to register the key using the new
+APIs to get the benefits.
+
+### PSA-based operations in the Cipher layer
+
+Add `mbedtls_cipher_setup_psa()` to set up a context that will call PSA to
+store the key and perform the operations.
+
+Benefits: use of PSA Crypto drivers; partial isolation of short-term secrets
+(still generated outside of PSA, but then held by PSA).
+
+Limitations: the key is still passed in the clear by the application. The
+multi-part APIs are not supported, only the one-shot APIs. The only modes
+supported are ECB, CBC without padding, GCM and CCM (this excludes stream
+ciphers and ChachaPoly); the only cipher supported is AES (this excludes Aria,
+Camellia, and ChachaPoly).
+
+Use in TLS: automatic. Used when the cipher and mode is supported (with
+gracious fallback to the legacy API otherwise) in all places where a cipher is
+used. There are two such places: in `ssl_tls.c` for record protection, and in
+`ssl_ticket.c` for protecting tickets we issue.
+
+Internal changes
+----------------
+
+All of these internal changes are active as soon as `MBEDTLS_USE_PSA_CRYPTO`
+is enabled, no change required on the application side.
+
+### TLS: cipher operations based on PSA
+
+See "PSA-based operations in the Cipher layer" above.
+
+### PK layer: ECDSA verification based on PSA
+
+Scope: `mbedtls_pk_verify()` will call to PSA for ECDSA signature
+verification.
+
+Benefits: use of PSA Crypto drivers.
+
+Use in TLS and X.509: in all places where an ECDSA signature is verified.
+
+### TLS: ECDHE computation based on PSA
+
+Scope: Client-side, for ECDHE-RSA and ECDHE-ECDSA key exchanges, the
+computation of the ECDHE key exchange is done by PSA.
+
+Limitations: client-side only, ECDHE-PSK not covered
+
+Benefits: use of PSA Crypto drivers.
+
+### TLS: handshake hashes and PRF computed with PSA
+
+Scope: with TLS 1.2, the following are computed with PSA:
+- the running handshake hashes;
+- the hash of the ServerKeyExchange part that is signed;
+- the `verify_data` part of the Finished message;
+- the TLS PRF.
+
+Benefits: use of PSA Crypto drivers.
+
+### X.509: some hashes computed with PSA
+
+Scope: the following hashes are computed with PSA:
+- when verifying a certificate chain, hash of the child for verifying the
+  parent's signature;
+- when writing a CSR, hash of the request for self-signing the request.
+
+Benefits: use of PSA Crypto drivers.
+
+Parts that are not covered yet
+==============================
 
 (To be written.)