diff --git a/library/constant_time.c b/library/constant_time.c
index d48d646..60352ae 100644
--- a/library/constant_time.c
+++ b/library/constant_time.c
@@ -19,11 +19,16 @@
 
 #include "common.h"
 #include "constant_time.h"
+#include "mbedtls/error.h"
 
 #if defined(MBEDTLS_BIGNUM_C)
 #include "mbedtls/bignum.h"
 #endif
 
+#if defined(MBEDTLS_SSL_TLS_C)
+#include "ssl_misc.h"
+#endif
+
 
 /* constant-time buffer comparison */
 int mbedtls_ssl_safer_memcmp( const void *a, const void *b, size_t n )
@@ -439,3 +444,95 @@
                                  offset, offset_secret );
     }
 }
+
+#if defined(MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC)
+
+/*
+ * Compute HMAC of variable-length data with constant flow.
+ *
+ * Only works with MD-5, SHA-1, SHA-256 and SHA-384.
+ * (Otherwise, computation of block_size needs to be adapted.)
+ */
+int mbedtls_cf_hmac(
+        mbedtls_md_context_t *ctx,
+        const unsigned char *add_data, size_t add_data_len,
+        const unsigned char *data, size_t data_len_secret,
+        size_t min_data_len, size_t max_data_len,
+        unsigned char *output )
+{
+    /*
+     * This function breaks the HMAC abstraction and uses the md_clone()
+     * extension to the MD API in order to get constant-flow behaviour.
+     *
+     * HMAC(msg) is defined as HASH(okey + HASH(ikey + msg)) where + means
+     * concatenation, and okey/ikey are the XOR of the key with some fixed bit
+     * patterns (see RFC 2104, sec. 2), which are stored in ctx->hmac_ctx.
+     *
+     * We'll first compute inner_hash = HASH(ikey + msg) by hashing up to
+     * minlen, then cloning the context, and for each byte up to maxlen
+     * finishing up the hash computation, keeping only the correct result.
+     *
+     * Then we only need to compute HASH(okey + inner_hash) and we're done.
+     */
+    const mbedtls_md_type_t md_alg = mbedtls_md_get_type( ctx->md_info );
+    /* TLS 1.2 only supports SHA-384, SHA-256, SHA-1, MD-5,
+     * all of which have the same block size except SHA-384. */
+    const size_t block_size = md_alg == MBEDTLS_MD_SHA384 ? 128 : 64;
+    const unsigned char * const ikey = ctx->hmac_ctx;
+    const unsigned char * const okey = ikey + block_size;
+    const size_t hash_size = mbedtls_md_get_size( ctx->md_info );
+
+    unsigned char aux_out[MBEDTLS_MD_MAX_SIZE];
+    mbedtls_md_context_t aux;
+    size_t offset;
+    int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
+
+    mbedtls_md_init( &aux );
+
+#define MD_CHK( func_call ) \
+    do {                    \
+        ret = (func_call);  \
+        if( ret != 0 )      \
+            goto cleanup;   \
+    } while( 0 )
+
+    MD_CHK( mbedtls_md_setup( &aux, ctx->md_info, 0 ) );
+
+    /* After hmac_start() of hmac_reset(), ikey has already been hashed,
+     * so we can start directly with the message */
+    MD_CHK( mbedtls_md_update( ctx, add_data, add_data_len ) );
+    MD_CHK( mbedtls_md_update( ctx, data, min_data_len ) );
+
+    /* For each possible length, compute the hash up to that point */
+    for( offset = min_data_len; offset <= max_data_len; offset++ )
+    {
+        MD_CHK( mbedtls_md_clone( &aux, ctx ) );
+        MD_CHK( mbedtls_md_finish( &aux, aux_out ) );
+        /* Keep only the correct inner_hash in the output buffer */
+        mbedtls_cf_memcpy_if_eq( output, aux_out, hash_size,
+                                 offset, data_len_secret );
+
+        if( offset < max_data_len )
+            MD_CHK( mbedtls_md_update( ctx, data + offset, 1 ) );
+    }
+
+    /* The context needs to finish() before it starts() again */
+    MD_CHK( mbedtls_md_finish( ctx, aux_out ) );
+
+    /* Now compute HASH(okey + inner_hash) */
+    MD_CHK( mbedtls_md_starts( ctx ) );
+    MD_CHK( mbedtls_md_update( ctx, okey, block_size ) );
+    MD_CHK( mbedtls_md_update( ctx, output, hash_size ) );
+    MD_CHK( mbedtls_md_finish( ctx, output ) );
+
+    /* Done, get ready for next time */
+    MD_CHK( mbedtls_md_hmac_reset( ctx ) );
+
+#undef MD_CHK
+
+cleanup:
+    mbedtls_md_free( &aux );
+    return( ret );
+}
+
+#endif /* MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC */
diff --git a/library/constant_time.h b/library/constant_time.h
index 060aca3..782e89a 100644
--- a/library/constant_time.h
+++ b/library/constant_time.h
@@ -23,6 +23,10 @@
 #include "mbedtls/bignum.h"
 #endif
 
+#if defined(MBEDTLS_SSL_TLS_C)
+#include "ssl_misc.h"
+#endif
+
 #include <stddef.h>
 
 int mbedtls_ssl_safer_memcmp( const void *a, const void *b, size_t n );
@@ -98,3 +102,47 @@
                                size_t offset_secret,
                                size_t offset_min, size_t offset_max,
                                size_t len );
+
+#if defined(MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC)
+
+/** Compute the HMAC of variable-length data with constant flow.
+ *
+ * This function computes the HMAC of the concatenation of \p add_data and \p
+ * data, and does with a code flow and memory access pattern that does not
+ * depend on \p data_len_secret, but only on \p min_data_len and \p
+ * max_data_len. In particular, this function always reads exactly \p
+ * max_data_len bytes from \p data.
+ *
+ * \param ctx               The HMAC context. It must have keys configured
+ *                          with mbedtls_md_hmac_starts() and use one of the
+ *                          following hashes: SHA-384, SHA-256, SHA-1 or MD-5.
+ *                          It is reset using mbedtls_md_hmac_reset() after
+ *                          the computation is complete to prepare for the
+ *                          next computation.
+ * \param add_data          The additional data prepended to \p data. This
+ *                          must point to a readable buffer of \p add_data_len
+ *                          bytes.
+ * \param add_data_len      The length of \p add_data in bytes.
+ * \param data              The data appended to \p add_data. This must point
+ *                          to a readable buffer of \p max_data_len bytes.
+ * \param data_len_secret   The length of the data to process in \p data.
+ *                          This must be no less than \p min_data_len and no
+ *                          greater than \p max_data_len.
+ * \param min_data_len      The minimal length of \p data in bytes.
+ * \param max_data_len      The maximal length of \p data in bytes.
+ * \param output            The HMAC will be written here. This must point to
+ *                          a writable buffer of sufficient size to hold the
+ *                          HMAC value.
+ *
+ * \retval 0 on success.
+ * \retval MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED
+ *         The hardware accelerator failed.
+ */
+int mbedtls_ssl_cf_hmac(
+        mbedtls_md_context_t *ctx,
+        const unsigned char *add_data, size_t add_data_len,
+        const unsigned char *data, size_t data_len_secret,
+        size_t min_data_len, size_t max_data_len,
+        unsigned char *output );
+
+#endif /* MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC */
diff --git a/library/ssl_msg.c b/library/ssl_msg.c
index fcd63ac..be9c5f2 100644
--- a/library/ssl_msg.c
+++ b/library/ssl_msg.c
@@ -938,97 +938,6 @@
     return( 0 );
 }
 
-#if defined(MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC)
-
-/*
- * Compute HMAC of variable-length data with constant flow.
- *
- * Only works with MD-5, SHA-1, SHA-256 and SHA-384.
- * (Otherwise, computation of block_size needs to be adapted.)
- */
-MBEDTLS_STATIC_TESTABLE int mbedtls_cf_hmac(
-        mbedtls_md_context_t *ctx,
-        const unsigned char *add_data, size_t add_data_len,
-        const unsigned char *data, size_t data_len_secret,
-        size_t min_data_len, size_t max_data_len,
-        unsigned char *output )
-{
-    /*
-     * This function breaks the HMAC abstraction and uses the md_clone()
-     * extension to the MD API in order to get constant-flow behaviour.
-     *
-     * HMAC(msg) is defined as HASH(okey + HASH(ikey + msg)) where + means
-     * concatenation, and okey/ikey are the XOR of the key with some fixed bit
-     * patterns (see RFC 2104, sec. 2), which are stored in ctx->hmac_ctx.
-     *
-     * We'll first compute inner_hash = HASH(ikey + msg) by hashing up to
-     * minlen, then cloning the context, and for each byte up to maxlen
-     * finishing up the hash computation, keeping only the correct result.
-     *
-     * Then we only need to compute HASH(okey + inner_hash) and we're done.
-     */
-    const mbedtls_md_type_t md_alg = mbedtls_md_get_type( ctx->md_info );
-    /* TLS 1.2 only supports SHA-384, SHA-256, SHA-1, MD-5,
-     * all of which have the same block size except SHA-384. */
-    const size_t block_size = md_alg == MBEDTLS_MD_SHA384 ? 128 : 64;
-    const unsigned char * const ikey = ctx->hmac_ctx;
-    const unsigned char * const okey = ikey + block_size;
-    const size_t hash_size = mbedtls_md_get_size( ctx->md_info );
-
-    unsigned char aux_out[MBEDTLS_MD_MAX_SIZE];
-    mbedtls_md_context_t aux;
-    size_t offset;
-    int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
-
-    mbedtls_md_init( &aux );
-
-#define MD_CHK( func_call ) \
-    do {                    \
-        ret = (func_call);  \
-        if( ret != 0 )      \
-            goto cleanup;   \
-    } while( 0 )
-
-    MD_CHK( mbedtls_md_setup( &aux, ctx->md_info, 0 ) );
-
-    /* After hmac_start() of hmac_reset(), ikey has already been hashed,
-     * so we can start directly with the message */
-    MD_CHK( mbedtls_md_update( ctx, add_data, add_data_len ) );
-    MD_CHK( mbedtls_md_update( ctx, data, min_data_len ) );
-
-    /* For each possible length, compute the hash up to that point */
-    for( offset = min_data_len; offset <= max_data_len; offset++ )
-    {
-        MD_CHK( mbedtls_md_clone( &aux, ctx ) );
-        MD_CHK( mbedtls_md_finish( &aux, aux_out ) );
-        /* Keep only the correct inner_hash in the output buffer */
-        mbedtls_cf_memcpy_if_eq( output, aux_out, hash_size,
-                                 offset, data_len_secret );
-
-        if( offset < max_data_len )
-            MD_CHK( mbedtls_md_update( ctx, data + offset, 1 ) );
-    }
-
-    /* The context needs to finish() before it starts() again */
-    MD_CHK( mbedtls_md_finish( ctx, aux_out ) );
-
-    /* Now compute HASH(okey + inner_hash) */
-    MD_CHK( mbedtls_md_starts( ctx ) );
-    MD_CHK( mbedtls_md_update( ctx, okey, block_size ) );
-    MD_CHK( mbedtls_md_update( ctx, output, hash_size ) );
-    MD_CHK( mbedtls_md_finish( ctx, output ) );
-
-    /* Done, get ready for next time */
-    MD_CHK( mbedtls_md_hmac_reset( ctx ) );
-
-#undef MD_CHK
-
-cleanup:
-    mbedtls_md_free( &aux );
-    return( ret );
-}
-#endif /* MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC */
-
 int mbedtls_ssl_decrypt_buf( mbedtls_ssl_context const *ssl,
                              mbedtls_ssl_transform *transform,
                              mbedtls_record *rec )