Changed crypto_driver.h based on PR feedback
diff --git a/include/psa/crypto_driver.h b/include/psa/crypto_driver.h
index 64c21b5..c0a62b2 100644
--- a/include/psa/crypto_driver.h
+++ b/include/psa/crypto_driver.h
@@ -1,348 +1,615 @@
+/**
+ * \file psa/crypto_driver.h
+ * \brief Platform Security Architecture cryptographic driver module
+ *
+ * This file describes an API for driver developers to implement to enable
+ * hardware to be called in a standardized way by a PSA Cryptographic API
+ * implementation. The API described is not intended to be called by
+ * application developers.
+ */
+
+/*
+ * Copyright (C) 2018, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
#ifndef __PSA_CRYPTO_DRIVER_H__
#define __PSA_CRYPTO_DRIVER_H__
#include <stddef.h>
#include <stdint.h>
+/** The following types are redefinitions from the psa/crypto.h file.
+ * It is intended that these will be moved to a new common header file to
+ * avoid duplication. They are included here for expediency in publication.
+ */
typedef uint32_t psa_status_t;
typedef uint32_t psa_algorithm_t;
-typedef uint32_t encrypt_or_decrypt_t;
+typedef uint8_t encrypt_or_decrypt_t;
typedef uint32_t psa_key_slot_t;
typedef uint32_t psa_key_type_t;
/** \defgroup opaque_mac Opaque Message Authentication Code
- * @{
*/
-/** \brief A function that starts an MAC operation for a PSA Crypto Driver implementation using an opaque key
+/**@{*/
+/** \brief A function that starts a MAC operation for a PSA Crypto Driver
+ * implementation using an opaque key
*
- * \param p_context A structure that will contain the hardware-specific MAC context
- * \param key_slot The slot of the key to be used for the operation
- * \param algorithm The algorithm to be used to underly the MAC operation
+ * \param[in,out] p_context A structure that will contain the
+ * hardware-specific MAC context
+ * \param[in] key_slot The slot of the key to be used for the
+ * operation
+ * \param[in] algorithm The algorithm to be used to underly the MAC
+ * operation
*
* \retval PSA_SUCCESS
* Success.
*/
-typedef psa_status_t (*pcd_mac_opaque_setup_t)( void *p_context,
- psa_key_slot_t key_slot,
- psa_algorithm_t algorithm );
+typedef psa_status_t (*pcd_mac_opaque_setup_t)(void *p_context,
+ psa_key_slot_t key_slot,
+ psa_algorithm_t algorithm);
-/** \brief A function that continues a previously started MAC operation using an opaque key
+/** \brief A function that continues a previously started MAC operation using
+ * an opaque key
*
- * \param p_context A hardware-specific structure for the previously-established MAC operation to be continued
- * \param p_input A buffer containing the message to be appended to the MAC operation
- * \param input_length The size in bytes of the input message buffer
+ * \param[in,out] p_context A hardware-specific structure for the
+ * previously-established MAC operation to be
+ * continued
+ * \param[in] p_input A buffer containing the message to be appended
+ * to the MAC operation
+ * \param[in] input_length The size in bytes of the input message buffer
*/
-typedef psa_status_t (*pcd_mac_opaque_update_t)( void *p_context,
- const unsigned char *p_input,
- size_t input_length );
+typedef psa_status_t (*pcd_mac_opaque_update_t)(void *p_context,
+ const uint8_t *p_input,
+ size_t input_length);
-/** \brief a function that completes a previously started MAC operation by returning the resulting MAC using an opaque key
+/** \brief a function that completes a previously started MAC operation by
+ * returning the resulting MAC using an opaque key
*
- * \param p_context A hardware-specific structure for the previously started MAC operation to be fiinished
- * \param p_output A buffer where the generated MAC will be placed
- * \param output_size The size in bytes of the buffer that has been allocated for the `output` buffer
- * \param p_output_length After completion, the address will contain the number of bytes placed in the `p_output` buffer
+ * \param[in] p_context A hardware-specific structure for the
+ * previously started MAC operation to be
+ * finished
+ * \param[out] p_mac A buffer where the generated MAC will be
+ * placed
+ * \param[in] mac_size The size in bytes of the buffer that has been
+ * allocated for the `output` buffer
+ * \param[out] p_mac_length After completion, will contain the number of
+ * bytes placed in the `p_output` buffer
*
* \retval PSA_SUCCESS
* Success.
*/
-typedef psa_status_t (*pcd_mac_opaque_finish_t)( void *p_ctx,
- unsigned char *p_output,
- size_t output_size,
- size_t *p_output_length );
+typedef psa_status_t (*pcd_mac_opaque_finish_t)(void *p_context,
+ uint8_t *p_mac,
+ size_t mac_size,
+ size_t *p_mac_length);
-/** \brief A function that completes a previously started MAC operation by comparing the resulting MAC against a known value
- * using an opaque key
+/** \brief A function that completes a previously started MAC operation by
+ * comparing the resulting MAC against a known value using an opaque key
*
- * \param p_context A hardware-specific structure for the previously started MAC operation to be fiinished
- * \param p_mac The MAC value against which the resulting MAC will be compared against
- * \param mac_length The size in bytes of the value stored in `mac`
+ * \param[in] p_context A hardware-specific structure for the previously
+ * started MAC operation to be fiinished
+ * \param[in] p_mac The MAC value against which the resulting MAC will
+ * be compared against
+ * \param[in] mac_length The size in bytes of the value stored in `p_mac`
*
* \retval PSA_SUCCESS
- * The operation completed successfully and the MACs matched each other
+ * The operation completed successfully and the MACs matched each
+ * other
* \retval PSA_ERROR_INVALID_SIGNATURE
- * The operation completed successfully, but the calculated MAC did not match the provided MAC
+ * The operation completed successfully, but the calculated MAC did
+ * not match the provided MAC
*/
-typedef psa_status_t (*pcd_mac_opaque_finish_verify_t)( void *p_context,
- const unsigned char *p_mac,
- size_t mac_length );
+typedef psa_status_t (*pcd_mac_opaque_finish_verify_t)(void *p_context,
+ const uint8_t *p_mac,
+ size_t mac_length);
-/** \brief A funciton that performs an MAC operation in one command and return the calculated MAC using an opaque key
+/** \brief A function that aborts a previous started opaque-key MAC operation
+
+ * \param[in] p_context A hardware-specific structure for the previously
+ * started MAC operation to be aborted
+ */
+typedef psa_status_t (*pcd_mac_opaque_abort_t)(void *p_context);
+
+/** \brief A funciton that performs a MAC operation in one command and return
+ * the calculated MAC using an opaque key
*
- * \param p_input A buffer containing the message to be MACed
- * \param input_length The size in bytes of `input`
- * \param key_slot The slot of the key to be used
- * \param alg The algorithm to be used to underlie the MAC operation
- * \param p_output A buffer where the generated MAC will be placed
- * \param output_size The size in bytes of the `output` buffer
- * \param p_output_length After completion, the address will contain the number of bytes placed in the `output` buffer
+ * \param[in] p_input A buffer containing the message to be MACed
+ * \param[in] input_length The size in bytes of `input`
+ * \param[in] key_slot The slot of the key to be used
+ * \param[in] alg The algorithm to be used to underlie the MA
+ * operation
+ * \param[out] p_mac A buffer where the generated MAC will be
+ * placed
+ * \param[in] mac_size The size in bytes of the `output` buffer
+ * \param[out] p_mac_length After completion, will contain the number of
+ * bytes placed in the `output` buffer
*
* \retval PSA_SUCCESS
* Success.
*/
-typedef psa_status_t (*pcd_mac_opaque_t)( const unsigned char *p_input,
- size_t input_length,
- psa_key_slot_t key_slot,
- psa_algorithm_t alg,
- unsigned char *p_output,
- size_t output_size,
- size_t *p_output_length );
+typedef psa_status_t (*pcd_mac_opaque_generate_t)(const uint8_t *p_input,
+ size_t input_length,
+ psa_key_slot_t key_slot,
+ psa_algorithm_t alg,
+ uint8_t *p_mac,
+ size_t mac_size,
+ size_t *p_mac_length);
-/** \brief A function that performs an MAC operation in one command and compare the resulting MAC against a known value using an opaque key
+/** \brief A function that performs an MAC operation in one command and
+ * compare the resulting MAC against a known value using an opaque key
*
- * \param p_input A buffer containing the message to be MACed
- * \param input_length The size in bytes of `input`
- * \param key_slot The slot of the key to be used
- * \param alg The algorithm to be used to underlie the MAC operation
- * \param p_mac The MAC value against which the resulting MAC will be compared against
- * \param mac_length The size in bytes of `mac`
+ * \param[in] p_input A buffer containing the message to be MACed
+ * \param[in] input_length The size in bytes of `input`
+ * \param[in] key_slot The slot of the key to be used
+ * \param[in] alg The algorithm to be used to underlie the MAC
+ * operation
+ * \param[in] p_mac The MAC value against which the resulting MAC will
+ * be compared against
+ * \param[in] mac_length The size in bytes of `mac`
*
* \retval PSA_SUCCESS
- * The operation completed successfully and the MACs matched each other
+ * The operation completed successfully and the MACs matched each
+ * other
* \retval PSA_ERROR_INVALID_SIGNATURE
- * The operation completed successfully, but the calculated MAC did not match the provided MAC
+ * The operation completed successfully, but the calculated MAC did
+ * not match the provided MAC
*/
-typedef psa_status_t (*pcd_mac_opaque_verify_t)( const unsigned char *p_input,
+typedef psa_status_t (*pcd_mac_opaque_verify_t)(const uint8_t *p_input,
size_t input_length,
psa_key_slot_t key_slot,
psa_algorithm_t alg,
- const unsigned char *p_mac,
- size_t mac_length );
+ const uint8_t *p_mac,
+ size_t mac_length);
-/** \brief A struct containing all of the function pointers needed to implement MAC operations using opaque keys.
+/** \brief A struct containing all of the function pointers needed to
+ * implement MAC operations using opaque keys.
*
- * PSA Crypto API implementations should populate the table as appropriate upon startup.
+ * PSA Crypto API implementations should populate the table as appropriate
+ * upon startup.
*
- * If one of the functions is not implemented (such as `pcd_mac_opaque_t`), it should be set to NULL.
+ * If one of the functions is not implemented (such as `pcd_mac_opaque_t`),
+ * it should be set to NULL.
+ *
+ * Driver implementers should ensure that they implement all of the functions
+ * that make sense for their hardware, and that they provide a full solution
+ * (for example, if they support `p_setup`, they should also support
+ * `p_update` and at least one of `p_finish` or `p_finish_verify`).
*
*/
struct pcd_mac_opaque_t {
- size_t context_size; /**<The size in bytes of the hardware-specific Opaque-MAC Context structure */
- pcd_mac_opaque_setup_t *p_setup; /**< Function that performs the setup operation */
- pcd_mac_opaque_update_t *p_update; /**< Function that performs the update operation */
- pcd_mac_opaque_finish_t *p_finish; /**< Function that completes the operation */
- pcd_mac_opaque_t *p_mac; /**< Function that performs the MAC operation in one call */
- pcd_mac_opaque_verify_t *p_mac_verify; /**<Function that performs the MAC and verify operation in one call */
+ /**The size in bytes of the hardware-specific Opaque-MAC Context structure
+ */
+ size_t context_size;
+ /** Function that performs the setup operation
+ */
+ pcd_mac_opaque_setup_t *p_setup;
+ /** Function that performs the update operation
+ */
+ pcd_mac_opaque_update_t *p_update;
+ /** Function that completes the operation
+ */
+ pcd_mac_opaque_finish_t *p_finish;
+ /** Function that completed a MAC operation with a verify check
+ */
+ pcd_mac_opaque_finish_verify_t *p_finish_verify;
+ /** Function that aborts a previoustly started operation
+ */
+ pcd_mac_opaque_abort_t *p_abort;
+ /** Function that performs the MAC operation in one call
+ */
+ pcd_mac_opaque_generate_t *p_mac;
+ /** Function that performs the MAC and verify operation in one call
+ */
+ pcd_mac_opaque_verify_t *p_mac_verify;
};
-/** @} */
+/**@}*/
/** \defgroup transparent_mac Transparent Message Authentication Code
- * @{
*/
+/**@{*/
/** \brief The hardware-specific transparent-key MAC context structure
- * The contents of this structure are implementation dependent and are therefore not described here
+ * The contents of this structure are implementation dependent and are
+ * therefore not described here.
*/
struct pcd_mac_transparent_context_t {
// Implementation specific
};
-/** \brief The function prototype for the setup operation of a transparent-key MAC operation
+/** \brief The function prototype for the setup operation of a
+ * transparent-key MAC operation
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
- * pcd_mac_transparent_<ALGO>_<MAC_VARIANT>_start
+ * pcd_mac_transparent_<ALGO>_<MAC_VARIANT>_setup
* ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying hash function, and `MAC_VARIANT` is the specific variant of a
- * MAC operation (such as HMAC or CMAC)
+ * Where `ALGO` is the name of the underlying primitive, and `MAC_VARIANT`
+ * is the specific variant of a MAC operation (such as HMAC or CMAC)
*
- * \param p_context A structure that will contain the hardware-specific MAC context
- * \param p_key A buffer containing the cleartext key material to be used in the operation
- * \param key_length The size in bytes of the key material
+ * \param[in,out] p_context A structure that will contain the
+ * hardware-specific MAC context
+ * \param[in] p_key A buffer containing the cleartext key material
+ * to be used in the operation
+ * \param[in] key_length The size in bytes of the key material
*
* \retval PSA_SUCCESS
* Success.
*/
-typedef psa_status_t (*pcd_mac_transparent_start_t)( struct pcd_mac_transparent_context_t *p_context,
- const unsigned char *p_key,
- size_t key_length );
+typedef psa_status_t (*pcd_mac_transparent_setup_t)(struct pcd_mac_transparent_context_t *p_context,
+ const uint8_t *p_key,
+ size_t key_length);
-/** \brief The function prototype for the update operation of a transparent-key MAC operation
+/** \brief The function prototype for the update operation of a
+ * transparent-key MAC operation
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_mac_transparent_<ALGO>_<MAC_VARIANT>_update
* ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is the specific variant of a
- * MAC operation (such as HMAC or CMAC)
+ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT`
+ * is the specific variant of a MAC operation (such as HMAC or CMAC)
*
- * \param p_context A hardware-specific structure for the previously-established MAC operation to be continued
- * \param p_input A buffer containing the message to be appended to the MAC operation
- * \param input_length The size in bytes of the input message buffer
+ * \param[in,out] p_context A hardware-specific structure for the
+ * previously-established MAC operation to be
+ * continued
+ * \param[in] p_input A buffer containing the message to be appended
+ * to the MAC operation
+ * \param[in] input_length The size in bytes of the input message buffer
*/
-typedef psa_status_t (*pcd_mac_transparent_update_t)( struct pcd_mac_transparent_context_t *p_context,
- const unsigned char *p_input,
- size_t input_length );
+typedef psa_status_t (*pcd_mac_transparent_update_t)(struct pcd_mac_transparent_context_t *p_context,
+ const uint8_t *p_input,
+ size_t input_length);
-/** \brief The function prototype for the finish operation of a transparent-key MAC operation
+/** \brief The function prototype for the finish operation of a
+ * transparent-key MAC operation
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_mac_transparent_<ALGO>_<MAC_VARIANT>_finish
* ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is the specific variant of a
- * MAC operation (such as HMAC or CMAC)
+ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is
+ * the specific variant of a MAC operation (such as HMAC or CMAC)
*
- * \param p_context A hardware-specific structure for the previously started MAC operation to be fiinished
- * \param p_output A buffer where the generated MAC will be placed
- * \param output_size The size in bytes of the buffer that has been allocated for the `p_output` buffer
- * \param p_output_length After completion, will contain the number of bytes placed in the `p_output` buffer
+ * \param[in] p_context A hardware-specific structure for the
+ * previously started MAC operation to be
+ * finished
+ * \param[out] p_mac A buffer where the generated MAC will be placed
+ * \param[in] mac_length The size in bytes of the buffer that has been
+ * allocated for the `p_mac` buffer
*
* \retval PSA_SUCCESS
* Success.
*/
-typedef psa_status_t (*pcd_mac_transparent_finish_t)( struct pcd_mac_transparent_context_t *p_context,
- unsigned char *p_output,
- size_t output_size,
- size_t *p_output_length );
+typedef psa_status_t (*pcd_mac_transparent_finish_t)(struct pcd_mac_transparent_context_t *p_context,
+ uint8_t *p_mac,
+ size_t mac_length);
-/** @}
+/** \brief The function prototype for the finish and verify operation of a
+ * transparent-key MAC operation
+ *
+ * Functions that implement the prototype should be named in the following
+ * convention:
+ * ~~~~~~~~~~~~~{.c}
+ * pcd_mac_transparent_<ALGO>_<MAC_VARIANT>_finish_verify
+ * ~~~~~~~~~~~~~
+ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is
+ * the specific variant of a MAC operation (such as HMAC or CMAC)
+ *
+ * \param[in] p_context A hardware-specific structure for the
+ * previously started MAC operation to be
+ * fiinished
+ * \param[in] p_mac A buffer containing the MAC that will be used
+ * for verification
+ * \param[in] mac_length The size in bytes of the data in the `p_mac`
+ * buffer
+ *
+ * \retval PSA_SUCCESS
+ * The operation completed successfully and the comparison matched
*/
+typedef psa_status_t (*pcd_mac_transparent_verify_finish_t)(struct pcd_mac_transparent_context_t *p_context,
+ const uint8_t *p_mac,
+ size_t mac_length);
+
+/** \brief The function prototype for the abort operation for a previously
+ * started transparent-key MAC operation
+ *
+ * Functions that implement the prototype should be named in the following
+ * convention:
+ * ~~~~~~~~~~~~~{.c}
+ * pcd_mac_transparent_<ALGO>_<MAC_VARIANT>_abort
+ * ~~~~~~~~~~~~~
+ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is
+ * the specific variant of a MAC operation (such as HMAC or CMAC)
+ *
+ * \param[in] p_context A hardware-specific structure for the
+ * previously started MAC operation to be
+ * fiinished
+ *
+ */
+typedef psa_status_t (*pcd_mac_transparent_abort_t)(struct pcd_mac_transparent_context_t *p_context);
+
+/** \brief The function prototype for a one-shot operation of a transparent-key
+ * MAC operation
+ *
+ * Functions that implement the prototype should be named in the following
+ * convention:
+ * ~~~~~~~~~~~~~{.c}
+ * pcd_mac_transparent_<ALGO>_<MAC_VARIANT>
+ * ~~~~~~~~~~~~~
+ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is
+ * the specific variant of a MAC operation (such as HMAC or CMAC)
+ *
+ * \param[in] p_input A buffer containing the data to be MACed
+ * \param[in] input_length The length in bytes of the `p_input` data
+ * \param[in] p_key A buffer containing the key material to be used
+ * for the MAC operation
+ * \param[in] key_length The length in bytes of the `p_key` data
+ * \param[in] alg The algorithm to be performed
+ * \param[out] p_mac The buffer where the resulting MAC will be placed
+ * upon success
+ * \param[in] mac_length The length in bytes of the `p_mac` buffer
+ */
+typedef psa_status_t (*pcd_mac_transparent_t)(const uint8_t *p_input,
+ size_t input_length,
+ const uint8_t *p_key,
+ size_t key_length,
+ psa_algorithm_t alg,
+ uint8_t *p_mac,
+ size_t mac_length);
+
+/** \brief The function prototype for a one-shot operation of a transparent-key
+ * MAC Verify operation
+ *
+ * Functions that implement the prototype should be named in the following
+ * convention:
+ * ~~~~~~~~~~~~~{.c}
+ * pcd_mac_transparent_<ALGO>_<MAC_VARIANT>_verify
+ * ~~~~~~~~~~~~~
+ * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is
+ * the specific variant of a MAC operation (such as HMAC or CMAC)
+ *
+ * \param[in] p_input A buffer containing the data to be MACed
+ * \param[in] input_length The length in bytes of the `p_input` data
+ * \param[in] p_key A buffer containing the key material to be used
+ * for the MAC operation
+ * \param[in] key_length The length in bytes of the `p_key` data
+ * \param[in] alg The algorithm to be performed
+ * \param[in] p_mac The MAC data to be compared
+ * \param[in] mac_length The length in bytes of the `p_mac` buffer
+ *
+ * \retval PSA_SUCCESS
+ * The operation completed successfully and the comparison matched
+ */
+typedef psa_status_t (*pcd_mac_transparent_verify_t)(const uint8_t *p_input,
+ size_t input_length,
+ const uint8_t *p_key,
+ size_t key_length,
+ psa_algorithm_t alg,
+ const uint8_t *p_mac,
+ size_t mac_length);
+/**@}*/
/** \defgroup opaque_cipher Opaque Symmetric Ciphers
- ** @{
*/
+/**@{*/
-/** \brief A function pointer that provides the cipher setup function for opaque-key operations
+/** \brief A function pointer that provides the cipher setup function for
+ * opaque-key operations
*
- * TBD: Since this is an opaque API (External, in Gilles nomeclature), shouldn't we be receiving a key handle/slot instead of key data? This is how I
- * will write it
-
- * \param p_context A structure that will contain the hardware-specific cipher context.
- * \param key_slot THe slot of the key to be used for the operation
- * \param algorithm The algorithm to be used in the cipher operation
- * \param direction Indicates whether the operation is an encrypt or decrypt
+ * \param[in,out] p_context A structure that will contain the
+ * hardware-specific cipher context.
+ * \param[in] key_slot The slot of the key to be used for the
+ * operation
+ * \param[in] algorithm The algorithm to be used in the cipher
+ * operation
+ * \param[in] direction Indicates whether the operation is an encrypt
+ * or decrypt
*
* \retval PSA_SUCCESS
* \retval PSA_ERROR_NOT_SUPPORTED
*/
-typedef psa_status_t (*pcd_cipher_opaque_setup_t) ( void *p_context,
- psa_key_slot_t key_slot,
- psa_algorithm_t algorithm,
- encrypt_or_decrypt_t direction );
-
-
-/** \brief A function pointer that sets the initialization vector (if necessary) for an opaque cipher operation
- *
- * Note that the psa_cipher_* function set has two IV functions: one to set the IV, and one to generate it
- * internally. the generate function is not necessary for the driver API as the PSA Crypto implementation
- * can do the generation using it's RNG features
- *
- * \param p_context A structure that contains the previously set up hardware-specific cipher context
- * \param p_iv A buffer containing the initialization vector
- * \param iv_length The size (in bytes) of the `p_iv` buffer
- *
- * \retval PSA_SUCCESS
- */
-typedef psa_status_t (*pcd_cipher_opaque_set_iv_t)( void *p_context,
- const uint8_t *p_iv,
- size_t iv_length );
-
-/** \brief A function that continues a previously started opaque-key cipher operation
- *
- * \param p_context A hardware-specific structure for the previously started cipher operation
- * \param p_input A buffer containing the data to be encrypted/decrypted
- * \param input_size The size in bytes of the buffer pointed to by `p_input`
- * \param p_output The caller-allocated buffer where the output will be placed
- * \param output_size The allocated size in bytes of the `p_output` buffer
- * \param p_output_length After completion, will contain the number of bytes placed in the `p_output` buffer
- *
- * \retval PSA_SUCCESS
- */
-typedef psa_status_t (*pcd_cipher_opaque_update_t) (void *p_context,
- const uint8_t *p_input,
- size_t input_size,
- uint8_t *p_output,
- size_t output_size,
- size_t *p_output_length );
-
-/** \brief A function that completes a previously started opaque-key cipher operation
- *
- * \param p_context A hardware-specific structure for the previously started cipher operation
- * \param p_output The caller-callocated buffer where the output will be placed
- * \param output_size The allocated size in bytes of the `p_output` buffer
- * \param p_output_length After completion, will contain the number of bytes placed in the `p_output` buffer
- *
- * \retval PSA_SUCCESS
- */
-typedef psa_status_t (*pcd_cipher_opaque_finish_t) (void *p_context, uint8_t *p_output, size_t output_size, size_t *p_output_length );
-
-/** \brief A function that performs the ECB block mode for opaque-key cipher operations
- *
- * Note: this function should only be used with implementations that do not provide a needed higher-level operation.
- *
- * \param key_slot The slot of the key to be used for the operation
- * \param algorithm The algorithm to be used in the cipher operation
- * \param direction Indicates whether the operation is an encrypt or decrypt
- * \param p_input A buffer containing the data to be encrypted/decrypted
- * \param input_size The size in bytes of the buffer pointed to by `p_input`
- * \param p_output The caller-allocated byffer where the output will be placed
- * \param output_size The allocated size in bytes of the `p_output` buffer
- *
- * \retval PSA_SUCCESS
- * \retval PSA_ERROR_NOT_SUPPORTED
- */
-typedef psa_status_t (*pcd_cipher_opaque_ecb_t) ( psa_key_slot_t key_slot,
+typedef psa_status_t (*pcd_cipher_opaque_setup_t)(void *p_context,
+ psa_key_slot_t key_slot,
psa_algorithm_t algorithm,
- encrypt_or_decrypt_t direction,
- const uint8_t *p_input,
- size_t input_size,
- uint8_t *p_output,
- size_t output_size );
+ encrypt_or_decrypt_t direction);
+
+/** \brief A function pointer that sets the initialization vector (if
+ * necessary) for an opaque cipher operation
+ *
+ * Rationale: that the psa_cipher_* function set has two IV functions: one to
+ * set the IV, and one to generate it internally. the generate function is not
+ * necessary for the driver API as the PSA Crypto implementation can do the
+ * generation using its RNG features.
+ *
+ * \param[in,out] p_context A structure that contains the previously set up
+ * hardware-specific cipher context
+ * \param[in] p_iv A buffer containing the initialization vector
+ * \param[in] iv_length The size (in bytes) of the `p_iv` buffer
+ *
+ * \retval PSA_SUCCESS
+ */
+typedef psa_status_t (*pcd_cipher_opaque_set_iv_t)(void *p_context,
+ const uint8_t *p_iv,
+ size_t iv_length);
+
+/** \brief A function that continues a previously started opaque-key cipher
+ * operation
+ *
+ * \param[in,out] p_context A hardware-specific structure for the
+ * previously started cipher operation
+ * \param[in] p_input A buffer containing the data to be
+ * encrypted/decrypted
+ * \param[in] input_size The size in bytes of the buffer pointed to
+ * by `p_input`
+ * \param[out] p_output The caller-allocated buffer where the
+ * output will be placed
+ * \param[in] output_size The allocated size in bytes of the
+ * `p_output` buffer
+ * \param[out] p_output_length After completion, will contain the number
+ * of bytes placed in the `p_output` buffer
+ *
+ * \retval PSA_SUCCESS
+ */
+typedef psa_status_t (*pcd_cipher_opaque_update_t)(void *p_context,
+ const uint8_t *p_input,
+ size_t input_size,
+ uint8_t *p_output,
+ size_t output_size,
+ size_t *p_output_length);
+
+/** \brief A function that completes a previously started opaque-key cipher
+ * operation
+ *
+ * \param[in] p_context A hardware-specific structure for the
+ * previously started cipher operation
+ * \param[out] p_output The caller-callocated buffer where the output
+ * will be placed
+ * \param[in] output_size The allocated size in bytes of the `p_output`
+ * buffer
+ * \param[out] p_output_length After completion, will contain the number of
+ * bytes placed in the `p_output` buffer
+ *
+ * \retval PSA_SUCCESS
+ */
+typedef psa_status_t (*pcd_cipher_opaque_finish_t)(void *p_context,
+ uint8_t *p_output,
+ size_t output_size,
+ size_t *p_output_length);
+
+/** \brief A function that aborts a previously started opaque-key cipher
+ * operation
+ *
+ * \param[in] p_context A hardware-specific structure for the
+ * previously started cipher operation
+ */
+typedef psa_status_t (*pcd_cipher_opaque_abort_t)(void *p_context);
+
+/** \brief A function that performs the ECB block mode for opaque-key cipher
+ * operations
+ *
+ * Note: this function should only be used with implementations that do not
+ * provide a needed higher-level operation.
+ *
+ * \param[in] key_slot The slot of the key to be used for the operation
+ * \param[in] algorithm The algorithm to be used in the cipher operation
+ * \param[in] direction Indicates whether the operation is an encrypt or
+ * decrypt
+ * \param[in] p_input A buffer containing the data to be
+ * encrypted/decrypted
+ * \param[in] input_size The size in bytes of the buffer pointed to by
+ * `p_input`
+ * \param[out] p_output The caller-allocated byffer where the output will
+ * be placed
+ * \param[in] output_size The allocated size in bytes of the `p_output`
+ * buffer
+ *
+ * \retval PSA_SUCCESS
+ * \retval PSA_ERROR_NOT_SUPPORTED
+ */
+typedef psa_status_t (*pcd_cipher_opaque_ecb_t)(psa_key_slot_t key_slot,
+ psa_algorithm_t algorithm,
+ encrypt_or_decrypt_t direction,
+ const uint8_t *p_input,
+ size_t input_size,
+ uint8_t *p_output,
+ size_t output_size);
/**
- * \brief A struct containing all of the function pointers needed to implement cipher operations using opaque keys.
+ * \brief A struct containing all of the function pointers needed to implement
+ * cipher operations using opaque keys.
*
- * PSA Crypto API implementations should populate instances of the table as appropriate upon startup.
+ * PSA Crypto API implementations should populate instances of the table as
+ * appropriate upon startup.
*
- * If one of the functions is not implemented (such as `pcd_cipher_opaque_ecb_t`), it should be set to NULL.
+ * If one of the functions is not implemented (such as
+ * `pcd_cipher_opaque_ecb_t`), it should be set to NULL.
*/
struct pcd_cipher_opaque_t {
- size_t size; /**<The size in bytes of the hardware-specific Opaque Cipher context structure */
- pcd_cipher_opaque_setup_t *p_setup; /**< Function that performs the setup operation */
- pcd_cipher_opaque_set_iv_t *p_set_iv; /**< Function that sets the IV (if necessary) */
- pcd_cipher_opaque_update_t *p_update; /**< Function that performs the update operation */
- pcd_cipher_opaque_finish_t *p_finish; /**< Function that completes the operation */
- pcd_cipher_opaque_ecb_t *p_ecb; /**< Function that performs ECB mode for the cipher (Danger: ECB mode is insecure) */
+ /** The size in bytes of the hardware-specific Opaque Cipher context
+ * structure
+ */
+ size_t size;
+ /** Function that performs the setup operation */
+ pcd_cipher_opaque_setup_t *p_setup;
+ /** Function that sets the IV (if necessary) */
+ pcd_cipher_opaque_set_iv_t *p_set_iv;
+ /** Function that performs the update operation */
+ pcd_cipher_opaque_update_t *p_update;
+ /** Function that completes the operation */
+ pcd_cipher_opaque_finish_t *p_finish;
+ /** Function that aborts the operation */
+ pcd_cipher_opaque_abort_t *p_abort;
+ /** Function that performs ECB mode for the cipher
+ * (Danger: ECB mode should not be used directly by clients of the PSA
+ * Crypto Client API)
+ */
+ pcd_cipher_opaque_ecb_t *p_ecb;
};
-/** @}
- */
+/**@}*/
/** \defgroup transparent_cipher Transparent Block Cipher
- * @{
*/
+/**@{*/
/** \brief The hardware-specific transparent-key Cipher context structure
- * The contents of this structure are implementation dependent and are therefore not described here
+ * The contents of this structure are implementation dependent and are
+ * therefore not described here.
*/
struct pcd_cipher_transparent_context_t {
// Implementation specific
};
-/** \brief The function prototype for the setup operation of transparent-key block cipher operations.
- * Functions that implement the prototype should be named in the following convention:
+/** \brief The function prototype for the setup operation of transparent-key
+ * block cipher operations.
+ * Functions that implement the prototype should be named in the following
+ * conventions:
* ~~~~~~~~~~~~~{.c}
* pcd_cipher_transparent_setup_<CIPHER_NAME>_<MODE>
* ~~~~~~~~~~~~~
* Where
* - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES)
* - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR)
+ * or for stream ciphers:
+ * ~~~~~~~~~~~~~{.c}
+ * pcd_cipher_transparent_setup_<CIPHER_NAME>
+ * ~~~~~~~~~~~~~
+ * Where `CIPHER_NAME` is the name of a stream cipher (i.e. RC4)
*
- * \param p_context A structure that will contain the hardware-specific cipher context
- * \param direction Indicates if the operation is an encrypt or a decrypt
- * \param p_key_data A buffer containing the cleartext key material to be used in the operation
- * \param key_data_size The size in bytes of the key material
+ * \param[in,out] p_context A structure that will contain the
+ * hardware-specific cipher context
+ * \param[in] direction Indicates if the operation is an encrypt or a
+ * decrypt
+ * \param[in] p_key_data A buffer containing the cleartext key material
+ * to be used in the operation
+ * \param[in] key_data_size The size in bytes of the key material
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_cipher_transparent_setup_t) ( struct pcd_cipher_transparent_context_t *p_context,
- encrypt_or_decrypt_t direction,
- const uint8_t *p_key_data,
- size_t key_data_size );
+typedef psa_status_t (*pcd_cipher_transparent_setup_t)(struct pcd_cipher_transparent_context_t *p_context,
+ encrypt_or_decrypt_t direction,
+ const uint8_t *p_key_data,
+ size_t key_data_size);
-/** \brief The function prototype for the set initialization vector operation of transparent-key block cipher operations
- * Functions that implement the prototype should be named in the following convention:
+/** \brief The function prototype for the set initialization vector operation
+ * of transparent-key block cipher operations
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_cipher_transparent_set_iv_<CIPHER_NAME>_<MODE>
* ~~~~~~~~~~~~~
@@ -350,18 +617,22 @@
* - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES)
* - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR)
*
- * \param p_context A structure that contains the previously setup hardware-specific cipher context
- * \param p_iv A buffer containing the initialization vecotr
- * \param iv_length The size in bytes of the contents of `p_iv`
+ * \param[in,out] p_context A structure that contains the previously setup
+ * hardware-specific cipher context
+ * \param[in] p_iv A buffer containing the initialization vecotr
+ * \param[in] iv_length The size in bytes of the contents of `p_iv`
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_cipher_transparent_set_iv_t) ( struct pcd_cipher_transparent_context_t *p_context,
- const uint8_t *p_iv,
- size_t iv_length );
-/** \brief The function prototype for the update operation of transparent-key block cipher operations.
+typedef psa_status_t (*pcd_cipher_transparent_set_iv_t)(struct pcd_cipher_transparent_context_t *p_context,
+ const uint8_t *p_iv,
+ size_t iv_length);
+
+/** \brief The function prototype for the update operation of transparent-key
+ * block cipher operations.
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_cipher_transparent_update_<CIPHER_NAME>_<MODE>
* ~~~~~~~~~~~~~
@@ -369,51 +640,58 @@
* - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES)
* - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR)
*
- * TODO: Should the PSA Crypto API implementation calling these functions handle padding? What about hardware that handles padding?
- *
- * \param p_context A hardware-specific structure for the previously started cipher operation
- * \param p_input A buffer containing the data to be encrypted or decrypted
- * \param input_size The size in bytes of the `p_input` buffer
- * \param p_output A caller-allocated buffer where the generated output will be placed
- * \param output_size The size in bytes of the `p_output` buffer
- * \param p_output_length After completion, will contain the number of bytes placed in the `p_output` buffer
+ * \param[in,out] p_context A hardware-specific structure for the
+ * previously started cipher operation
+ * \param[in] p_input A buffer containing the data to be
+ * encrypted or decrypted
+ * \param[in] input_size The size in bytes of the `p_input` buffer
+ * \param[out] p_output A caller-allocated buffer where the
+ * generated output will be placed
+ * \param[in] output_size The size in bytes of the `p_output` buffer
+ * \param[out] p_output_length After completion, will contain the number
+ * of bytes placed in the `p_output` buffer
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_cipher_transparent_update_t) ( struct pcd_cipher_transparent_context_t *p_context,
- const uint8_t *p_input,
- size_t input_size,
- uint8_t *p_output,
- size_t output_size,
- size_t *p_output_length );
+typedef psa_status_t (*pcd_cipher_transparent_update_t)(struct pcd_cipher_transparent_context_t *p_context,
+ const uint8_t *p_input,
+ size_t input_size,
+ uint8_t *p_output,
+ size_t output_size,
+ size_t *p_output_length);
-/** \brief The function prototype for the finish operation of transparent-key block cipher operations.
+/** \brief The function prototype for the finish operation of transparent-key
+ * block cipher operations.
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_cipher_transparent_finish_<CIPHER_NAME>_<MODE>
* ~~~~~~~~~~~~~
* Where
* - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES)
* - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR)
- *
- * TODO: Should the PSA Crypto API implementation calling these functions handle padding? What about hardware that handles padding?
- *
- * \param p_context A hardware-specific structure for the previously started cipher operation
- * \param p_output A caller-allocated buffer where the generated output will be placed
- * \param output_size The size in bytes of the `p_output` buffer
- * \param p_output_length After completion, will contain the number of bytes placed in the `p_output` buffer
+ *
+ * \param[in] p_context A hardware-specific structure for the
+ * previously started cipher operation
+ * \param[out] p_output A caller-allocated buffer where the generated
+ * output will be placed
+ * \param[in] output_size The size in bytes of the `p_output` buffer
+ * \param[out] p_output_length After completion, will contain the number of
+ * bytes placed in the `p_output` buffer
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_cipher_transparent_finish_t) ( struct pcd_cipher_transparent_context_t *p_context,
- uint8_t *p_output,
- size_t output_size,
- size_t *p_output_length );
+typedef psa_status_t (*pcd_cipher_transparent_finish_t)(struct pcd_cipher_transparent_context_t *p_context,
+ uint8_t *p_output,
+ size_t output_size,
+ size_t *p_output_length);
-/** \brief The function prototype for the abort operation of transparent-key block cipher operations.
+/** \brief The function prototype for the abort operation of transparent-key
+ * block cipher operations.
*
- * Functions that implement the following prototype should be named in the following convention:
+ * Functions that implement the following prototype should be named in the
+ * following convention:
* ~~~~~~~~~~~~~{.c}
* pcd_cipher_transparent_abort_<CIPHER_NAME>_<MODE>
* ~~~~~~~~~~~~~
@@ -421,336 +699,364 @@
* - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES)
* - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR)
*
- * TODO: Should the PSA Crypto API implementation calling these functions handle padding? What about hardware that handles padding?
- *
- * \param p_context A hardware-specific structure for the previously started cipher operation
+ * \param[in] p_context A hardware-specific structure for the
+ * previously started cipher operation
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_cipher_transparent_abort_t) ( struct pcd_cipher_transparent_context_t *p_context );
+typedef psa_status_t (*pcd_cipher_transparent_abort_t)(struct pcd_cipher_transparent_context_t *p_context);
-/** @}
- */
+/**@}*/
-/** \defgroup digest Message Digests
- * @{
+/** \defgroup driver_digest Message Digests
*/
+/**@{*/
/** \brief The hardware-specific hash context structure
- * The contents of this structure are implementation dependent and are therefore not described here
+ * The contents of this structure are implementation dependent and are
+ * therefore not described here
*/
struct pcd_hash_context_t {
// Implementation specific
};
-/** \brief The function prototype for the start operation of a hash (message digest) operation
+/** \brief The function prototype for the start operation of a hash (message
+ * digest) operation
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
- * pcd_hash_<ALGO>_start
+ * pcd_hash_<ALGO>_setup
* ~~~~~~~~~~~~~
* Where `ALGO` is the name of the underlying hash function
*
- * \param p_context A structure that will contain the hardware-specific hash context
+ * \param[in,out] p_context A structure that will contain the
+ * hardware-specific hash context
*
* \retval PSA_SUCCESS Success.
*/
-typedef psa_status_t (*pcd_hash_start_t)(struct pcd_hash_context_t *p_context );
+typedef psa_status_t (*pcd_hash_setup_t)(struct pcd_hash_context_t *p_context);
-
-
-/** \brief The function prototype for the update operation of a hash (message digest) operation
+/** \brief The function prototype for the update operation of a hash (message
+ * digest) operation
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_hash_<ALGO>_update
* ~~~~~~~~~~~~~
* Where `ALGO` is the name of the underlying algorithm
*
- * \param p_context A hardware-specific structure for the previously-established hash operation to be continued
- * \param p_input A buffer containing the message to be appended to the hash operation
- * \param input_length The size in bytes of the input message buffer
+ * \param[in,out] p_context A hardware-specific structure for the
+ * previously-established hash operation to be
+ * continued
+ * \param[in] p_input A buffer containing the message to be appended
+ * to the hash operation
+ * \param[in] input_length The size in bytes of the input message buffer
*/
-typedef psa_status_t (*pcd_hash_update_t)(struct pcd_hash_context_t *p_context, const unsigned char *p_input, size_t input_length);
+typedef psa_status_t (*pcd_hash_update_t)(struct pcd_hash_context_t *p_context,
+ const uint8_t *p_input,
+ size_t input_length);
-/** \brief The prototype for the finish operation of a hash (message digest) operation
+/** \brief The prototype for the finish operation of a hash (message digest)
+ * operation
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_hash_<ALGO>_finish
* ~~~~~~~~~~~~~
* Where `ALGO` is the name of the underlying algorithm
*
- * \param p_context A hardware-specific structure for the previously started hash operation to be fiinished
- * \param p_output A buffer where the generated digest will be placed
- * \param output_size The size in bytes of the buffer that has been allocated for the `p_output` buffer
+ * \param[in] p_context A hardware-specific structure for the
+ * previously started hash operation to be
+ * fiinished
+ * \param[out] p_output A buffer where the generated digest will be
+ * placed
+ * \param[in] output_size The size in bytes of the buffer that has been
+ * allocated for the `p_output` buffer
*
* \retval PSA_SUCCESS
* Success.
*/
-typedef psa_status_t (*pcd_hash_finish_t)(struct pcd_hash_context_t *p_context, unsigned char *p_output, size_t output_size);
+typedef psa_status_t (*pcd_hash_finish_t)(struct pcd_hash_context_t *p_context,
+ uint8_t *p_output,
+ size_t output_size);
-/** \brief The function prototype for the abort operation of a hash (message digest) operation
+/** \brief The function prototype for the abort operation of a hash (message
+ * digest) operation
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_hash_<ALGO>_abort
* ~~~~~~~~~~~~~
* Where `ALGO` is the name of the underlying algorithm
*
- * \param p_context A hardware-specific structure for the previously started hash operation to be aborted
+ * \param[in] p_context A hardware-specific structure for the previously
+ * started hash operation to be aborted
*/
typedef void (*pcd_hash_abort_t)(struct pcd_hash_context_t *p_context);
-/** @}
- */
+/**@}*/
/** \defgroup opaque_asymmetric Opaque Asymmetric Cryptography
- * @{
*/
+/**@{*/
/**
- * \brief A function that signs a hash or short message with a private key.
+ * \brief A function that signs a hash or short message with a private key
*
- * \param key_slot Key slot of an asymmetric key pair.
- * \param alg A signature algorithm that is compatible with
- * the type of `key`.
- * \param[in] p_hash The hash or message to sign.
- * \param hash_length Size of the `p_hash` buffer in bytes.
- * \param[out] p_signature Buffer where the signature is to be written.
- * \param signature_size Size of the `p_signature` buffer in bytes.
+ * \param[in] key_slot Key slot of an asymmetric key pair
+ * \param[in] alg A signature algorithm that is compatible
+ * with the type of `key`
+ * \param[in] p_hash The hash or message to sign
+ * \param[in] hash_length Size of the `p_hash` buffer in bytes
+ * \param[out] p_signature Buffer where the signature is to be written
+ * \param signature_size Size of the `p_signature` buffer in bytes
* \param[out] p_signature_length On success, the number of bytes
- * that make up the returned signature value.
+ * that make up the returned signature value
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_asymmetric_opaque_sign_t)( psa_key_slot_t key_slot,
- psa_algorithm_t alg,
- const uint8_t *p_hash,
- size_t hash_length,
- uint8_t *p_signature,
- size_t signature_size,
- size_t *p_signature_length );
+typedef psa_status_t (*pcd_asymmetric_opaque_sign_t)(psa_key_slot_t key_slot,
+ psa_algorithm_t alg,
+ const uint8_t *p_hash,
+ size_t hash_length,
+ uint8_t *p_signature,
+ size_t signature_size,
+ size_t *p_signature_length);
/**
- * \brief A function that verifies the signature a hash or short message using a public key.
+ * \brief A function that verifies the signature a hash or short message using
+ * a public key
*
- * \param key_slot Key slot of a public key or an asymmetric key pair.
- * \param alg A signature algorithm that is compatible with
- * the type of `key`.
- * \param[in] p_hash The hash or message whose signature is to be
- * verified.
- * \param hash_length Size of the `p_hash` buffer in bytes.
- * \param[in] p_signature Buffer containing the signature to verify.
- * \param signature_length Size of the `p_signature` buffer in bytes.
+ * \param[in] key_slot Key slot of a public key or an asymmetric key
+ * pair
+ * \param[in] alg A signature algorithm that is compatible with
+ * the type of `key`
+ * \param[in] p_hash The hash or message whose signature is to be
+ * verified
+ * \param[in] hash_length Size of the `p_hash` buffer in bytes
+ * \param[in] p_signature Buffer containing the signature to verify
+ * \param[in] signature_length Size of the `p_signature` buffer in bytes
*
* \retval PSA_SUCCESS
* The signature is valid.
*/
-typedef psa_status_t (*pcd_asymmetric_opaque_verify_t)( psa_key_slot_t key_slot,
- psa_algorithm_t alg,
- const uint8_t *p_hash,
- size_t hash_length,
- const uint8_t *p_signature,
- size_t signature_length );
+typedef psa_status_t (*pcd_asymmetric_opaque_verify_t)(psa_key_slot_t key_slot,
+ psa_algorithm_t alg,
+ const uint8_t *p_hash,
+ size_t hash_length,
+ const uint8_t *p_signature,
+ size_t signature_length);
/**
- * \brief A function that encrypts a short message with a public key.
+ * \brief A function that encrypts a short message with a public key
*
- * \param key_slot Key slot of a public key or an asymmetric key pair.
- * \param alg An asymmetric encryption algorithm that is
- * compatible with the type of `key`.
- * \param[in] p_input The message to encrypt.
- * \param input_length Size of the `p_input` buffer in bytes.
+ * \param[in] key_slot Key slot of a public key or an asymmetric key
+ * pair
+ * \param[in] alg An asymmetric encryption algorithm that is
+ * compatible with the type of `key`
+ * \param[in] p_input The message to encrypt
+ * \param[in] input_length Size of the `p_input` buffer in bytes
* \param[in] p_salt A salt or label, if supported by the
- * encryption algorithm.
+ * encryption algorithm
* If the algorithm does not support a
* salt, pass `NULL`.
* If the algorithm supports an optional
* salt and you do not want to pass a salt,
* pass `NULL`.
- *
- * - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
- * supported.
- * \param salt_length Size of the `p_salt` buffer in bytes.
+ * For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
+ * supported.
+ * \param[in] salt_length Size of the `p_salt` buffer in bytes
* If `p_salt` is `NULL`, pass 0.
* \param[out] p_output Buffer where the encrypted message is to
- * be written.
- * \param output_size Size of the `p_output` buffer in bytes.
- * \param[out] p_output_length On success, the number of bytes
- * that make up the returned output.
+ * be written
+ * \param[in] output_size Size of the `p_output` buffer in bytes
+ * \param[out] p_output_length On success, the number of bytes that make up
+ * the returned output
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_asymmetric_opaque_encrypt_t)( psa_key_slot_t key_slot,
- psa_algorithm_t alg,
- const uint8_t *p_input,
- size_t input_length,
- const uint8_t *p_salt,
- size_t salt_length,
- uint8_t *p_output,
- size_t output_size,
- size_t *p_output_length );
+typedef psa_status_t (*pcd_asymmetric_opaque_encrypt_t)(psa_key_slot_t key_slot,
+ psa_algorithm_t alg,
+ const uint8_t *p_input,
+ size_t input_length,
+ const uint8_t *p_salt,
+ size_t salt_length,
+ uint8_t *p_output,
+ size_t output_size,
+ size_t *p_output_length);
/**
* \brief Decrypt a short message with a private key.
*
- * \param key_slot Key slot of an asymmetric key pair.
- * \param alg An asymmetric encryption algorithm that is
- * compatible with the type of \p key.
- * \param[in] p_input The message to decrypt.
- * \param input_length Size of the `p_input` buffer in bytes.
+ * \param[in] key_slot Key slot of an asymmetric key pair
+ * \param[in] alg An asymmetric encryption algorithm that is
+ * compatible with the type of `key`
+ * \param[in] p_input The message to decrypt
+ * \param[in] input_length Size of the `p_input` buffer in bytes
* \param[in] p_salt A salt or label, if supported by the
- * encryption algorithm.
+ * encryption algorithm
* If the algorithm does not support a
* salt, pass `NULL`.
* If the algorithm supports an optional
* salt and you do not want to pass a salt,
* pass `NULL`.
- *
- * - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
- * supported.
- * \param salt_length Size of the `p_salt` buffer in bytes.
+ * For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
+ * supported.
+ * \param[in] salt_length Size of the `p_salt` buffer in bytes
* If `p_salt` is `NULL`, pass 0.
* \param[out] p_output Buffer where the decrypted message is to
- * be written.
- * \param output_size Size of the `p_output` buffer in bytes.
+ * be written
+ * \param[in] output_size Size of the `p_output` buffer in bytes
* \param[out] p_output_length On success, the number of bytes
- * that make up the returned output.
+ * that make up the returned output
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_asymmetric_opaque_decrypt_t)( psa_key_slot_t key_slot,
- psa_algorithm_t alg,
- const uint8_t *p_input,
- size_t input_length,
- const uint8_t *p_salt,
- size_t salt_length,
- uint8_t *p_output,
- size_t output_size,
- size_t *p_output_length );
+typedef psa_status_t (*pcd_asymmetric_opaque_decrypt_t)(psa_key_slot_t key_slot,
+ psa_algorithm_t alg,
+ const uint8_t *p_input,
+ size_t input_length,
+ const uint8_t *p_salt,
+ size_t salt_length,
+ uint8_t *p_output,
+ size_t output_size,
+ size_t *p_output_length);
/**
- * \brief A struct containing all of the function pointers needed to implement asymmetric cryptographic operations
- * using opaque keys.
+ * \brief A struct containing all of the function pointers needed to implement
+ * asymmetric cryptographic operations using opaque keys.
*
- * PSA Crypto API implementations should populate instances of the table as appropriate upon startup.
+ * PSA Crypto API implementations should populate instances of the table as
+ * appropriate upon startup.
*
* If one of the functions is not implemented, it should be set to NULL.
*/
struct pcd_asymmetric_opaque_t {
- pcd_asymmetric_opaque_sign_t *p_sign; /**< Function that performs the asymmetric sign operation */
- pcd_asymmetric_opaque_verify_t *p_verify; /**< Function that performs the asymmetric verify operation */
- pcd_asymmetric_opaque_encrypt_t *p_encrypt; /**< Function that performs the asymmetric encrypt operation */
- pcd_asymmetric_opaque_decrypt_t *p_decrypt; /**< Function that performs the asymmetric decrypt operation */
+ /** Function that performs the asymmetric sign operation */
+ pcd_asymmetric_opaque_sign_t *p_sign;
+ /** Function that performs the asymmetric verify operation */
+ pcd_asymmetric_opaque_verify_t *p_verify;
+ /** Function that performs the asymmetric encrypt operation */
+ pcd_asymmetric_opaque_encrypt_t *p_encrypt;
+ /** Function that performs the asymmetric decrypt operation */
+ pcd_asymmetric_opaque_decrypt_t *p_decrypt;
};
-/** @}
- */
+/**@}*/
/** \defgroup transparent_asymmetric Transparent Asymmetric Cryptography
- * @{
*/
+/**@{*/
/**
- * \brief A function that signs a hash or short message with a transparent private key.
+ * \brief A function that signs a hash or short message with a transparent
+ * private key
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_asymmetric_<ALGO>_sign
* ~~~~~~~~~~~~~
* Where `ALGO` is the name of the signing algorithm
*
- * \param p_key A buffer containing the private key material.
- * \param key_size The size in bytes of the `p_key` data
- * \param alg A signature algorithm that is compatible with
- * the type of `p_key`.
- * \param[in] p_hash The hash or message to sign.
- * \param hash_length Size of the `p_hash` buffer in bytes.
- * \param[out] p_signature Buffer where the signature is to be written.
- * \param signature_size Size of the `p_signature` buffer in bytes.
+ * \param[in] p_key A buffer containing the private key
+ * material
+ * \param[in] key_size The size in bytes of the `p_key` data
+ * \param[in] alg A signature algorithm that is compatible
+ * with the type of `p_key`
+ * \param[in] p_hash The hash or message to sign
+ * \param[in] hash_length Size of the `p_hash` buffer in bytes
+ * \param[out] p_signature Buffer where the signature is to be written
+ * \param[in] signature_size Size of the `p_signature` buffer in bytes
* \param[out] p_signature_length On success, the number of bytes
- * that make up the returned signature value.
+ * that make up the returned signature value
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_asymmetric_transparent_sign_t)( const uint8_t *p_key,
- size_t key_size,
- psa_algorithm_t alg,
- const uint8_t *p_hash,
- size_t hash_length,
- uint8_t *p_signature,
- size_t signature_size,
- size_t *p_signature_length );
+typedef psa_status_t (*pcd_asymmetric_transparent_sign_t)(const uint8_t *p_key,
+ size_t key_size,
+ psa_algorithm_t alg,
+ const uint8_t *p_hash,
+ size_t hash_length,
+ uint8_t *p_signature,
+ size_t signature_size,
+ size_t *p_signature_length);
/**
- * \brief A function that verifies the signature a hash or short message using a transparent public key.
+ * \brief A function that verifies the signature a hash or short message using
+ * a transparent public key
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_asymmetric_<ALGO>_verify
* ~~~~~~~~~~~~~
* Where `ALGO` is the name of the signing algorithm
*
- * \param p_key A buffer containing the public key material.
- * \param key_size The size in bytes of the `p_key` data
- * \param alg A signature algorithm that is compatible with
- * the type of `key`.
- * \param[in] p_hash The hash or message whose signature is to be
- * verified.
- * \param hash_length Size of the `p_hash` buffer in bytes.
- * \param[in] p_signature Buffer containing the signature to verify.
- * \param signature_length Size of the `p_signature` buffer in bytes.
+ * \param[in] p_key A buffer containing the public key material
+ * \param[in] key_size The size in bytes of the `p_key` data
+ * \param[in] alg A signature algorithm that is compatible with
+ * the type of `key`
+ * \param[in] p_hash The hash or message whose signature is to be
+ * verified
+ * \param[in] hash_length Size of the `p_hash` buffer in bytes
+ * \param[in] p_signature Buffer containing the signature to verify
+ * \param[in] signature_length Size of the `p_signature` buffer in bytes
*
* \retval PSA_SUCCESS
* The signature is valid.
*/
-typedef psa_status_t (*pcd_asymmetric_transparent_verify_t)( const uint8_t *p_key,
- size_t key_size,
- psa_algorithm_t alg,
- const uint8_t *p_hash,
- size_t hash_length,
- const uint8_t *p_signature,
- size_t signature_length );
+typedef psa_status_t (*pcd_asymmetric_transparent_verify_t)(const uint8_t *p_key,
+ size_t key_size,
+ psa_algorithm_t alg,
+ const uint8_t *p_hash,
+ size_t hash_length,
+ const uint8_t *p_signature,
+ size_t signature_length);
/**
- * \brief A function that encrypts a short message with a transparent public key.
+ * \brief A function that encrypts a short message with a transparent public
+ * key
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_asymmetric_<ALGO>_encrypt
* ~~~~~~~~~~~~~
* Where `ALGO` is the name of the encryption algorithm
*
- * \param p_key A buffer containing the public key material
- * \param key_size The size in bytes of the `p_key` data
- * \param alg An asymmetric encryption algorithm that is
- * compatible with the type of `key`.
- * \param[in] p_input The message to encrypt.
- * \param input_length Size of the `p_input` buffer in bytes.
+ * \param[in] p_key A buffer containing the public key material
+ * \param[in] key_size The size in bytes of the `p_key` data
+ * \param[in] alg An asymmetric encryption algorithm that is
+ * compatible with the type of `key`
+ * \param[in] p_input The message to encrypt
+ * \param[in] input_length Size of the `p_input` buffer in bytes
* \param[in] p_salt A salt or label, if supported by the
- * encryption algorithm.
+ * encryption algorithm
* If the algorithm does not support a
- * salt, pass `NULL`.
+ * salt, pass `NULL`
* If the algorithm supports an optional
* salt and you do not want to pass a salt,
* pass `NULL`.
- *
- * - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
- * supported.
- * \param salt_length Size of the `p_salt` buffer in bytes.
+ * For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
+ * supported.
+ * \param[in] salt_length Size of the `p_salt` buffer in bytes
* If `p_salt` is `NULL`, pass 0.
* \param[out] p_output Buffer where the encrypted message is to
- * be written.
- * \param output_size Size of the `p_output` buffer in bytes.
+ * be written
+ * \param[in] output_size Size of the `p_output` buffer in bytes
* \param[out] p_output_length On success, the number of bytes
- * that make up the returned output.
+ * that make up the returned output
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_asymmetric_transparent_encrypt_t)( const uint8_t *p_key,
+typedef psa_status_t (*pcd_asymmetric_transparent_encrypt_t)(const uint8_t *p_key,
size_t key_size,
psa_algorithm_t alg,
const uint8_t *p_input,
@@ -759,90 +1065,90 @@
size_t salt_length,
uint8_t *p_output,
size_t output_size,
- size_t *p_output_length );
+ size_t *p_output_length);
/**
- * \brief Decrypt a short message with a transparent private key.
+ * \brief Decrypt a short message with a transparent private key
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_asymmetric_<ALGO>_decrypt
* ~~~~~~~~~~~~~
* Where `ALGO` is the name of the encryption algorithm
*
- * \param p_key A buffer containing the private key material
- * \param key_size The size in bytes of the `p_key` data
- * \param alg An asymmetric encryption algorithm that is
- * compatible with the type of \p key.
- * \param[in] p_input The message to decrypt.
- * \param input_length Size of the `p_input` buffer in bytes.
+ * \param[in] p_key A buffer containing the private key material
+ * \param[in] key_size The size in bytes of the `p_key` data
+ * \param[in] alg An asymmetric encryption algorithm that is
+ * compatible with the type of `key`
+ * \param[in] p_input The message to decrypt
+ * \param[in] input_length Size of the `p_input` buffer in bytes
* \param[in] p_salt A salt or label, if supported by the
- * encryption algorithm.
+ * encryption algorithm
* If the algorithm does not support a
* salt, pass `NULL`.
* If the algorithm supports an optional
* salt and you do not want to pass a salt,
* pass `NULL`.
- *
- * - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
- * supported.
- * \param salt_length Size of the `p_salt` buffer in bytes.
- * If `p_salt` is `NULL`, pass 0.
+ * For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
+ * supported
+ * \param[in] salt_length Size of the `p_salt` buffer in bytes
+ * If `p_salt` is `NULL`, pass 0
* \param[out] p_output Buffer where the decrypted message is to
- * be written.
- * \param output_size Size of the `p_output` buffer in bytes.
+ * be written
+ * \param[in] output_size Size of the `p_output` buffer in bytes
* \param[out] p_output_length On success, the number of bytes
- * that make up the returned output.
+ * that make up the returned output
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_asymmetric_transparent_decrypt_t)( const uint8_t *p_key,
- size_t key_size,
- psa_algorithm_t alg,
- const uint8_t *p_input,
- size_t input_length,
- const uint8_t *p_salt,
- size_t salt_length,
- uint8_t *p_output,
- size_t output_size,
- size_t *p_output_length );
+typedef psa_status_t (*pcd_asymmetric_transparent_decrypt_t)(const uint8_t *p_key,
+ size_t key_size,
+ psa_algorithm_t alg,
+ const uint8_t *p_input,
+ size_t input_length,
+ const uint8_t *p_salt,
+ size_t salt_length,
+ uint8_t *p_output,
+ size_t output_size,
+ size_t *p_output_length);
-/** @}
- */
+/**@}*/
/** \defgroup aead_opaque AEAD Opaque
- * * @{
*/
+/**@{*/
-/** Process an authenticated encryption operation using an opaque key.
+/** \brief Process an authenticated encryption operation using an opaque key
*
- * \param key_slot Slot containing the key to use.
- * \param algorithm The AEAD algorithm to compute
- * (\c PSA_ALG_XXX value such that
- * #PSA_ALG_IS_AEAD(\p alg) is true).
- * \param[in] p_nonce Nonce or IV to use.
- * \param nonce_length Size of the `p_nonce` buffer in bytes.
- * \param[in] p_additional_data Additional data that will be authenticated
- * but not encrypted.
- * \param additional_data_length Size of `p_additional_data` in bytes.
- * \param[in] p_plaintext Data that will be authenticated and
- * encrypted.
- * \param plaintext_length Size of `p_plaintext` in bytes.
- * \param[out] p_ciphertext Output buffer for the authenticated and
- * encrypted data. The additional data is not
- * part of this output. For algorithms where the
- * encrypted data and the authentication tag
- * are defined as separate outputs, the
- * authentication tag is appended to the
- * encrypted data.
- * \param ciphertext_size Size of the `p_ciphertext` buffer in bytes.
- * \param[out] p_ciphertext_length On success, the size of the output
- * in the `p_ciphertext` buffer.
+ * \param[in] key_slot Slot containing the key to use.
+ * \param[in] algorithm The AEAD algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_AEAD(`alg`) is true)
+ * \param[in] p_nonce Nonce or IV to use
+ * \param[in] nonce_length Size of the `p_nonce` buffer in bytes
+ * \param[in] p_additional_data Additional data that will be
+ * authenticated but not encrypted
+ * \param[in] additional_data_length Size of `p_additional_data` in bytes
+ * \param[in] p_plaintext Data that will be authenticated and
+ * encrypted
+ * \param[in] plaintext_length Size of `p_plaintext` in bytes
+ * \param[out] p_ciphertext Output buffer for the authenticated and
+ * encrypted data. The additional data is
+ * not part of this output. For algorithms
+ * where the encrypted data and the
+ * authentication tag are defined as
+ * separate outputs, the authentication
+ * tag is appended to the encrypted data.
+ * \param[in] ciphertext_size Size of the `p_ciphertext` buffer in
+ * bytes
+ * \param[out] p_ciphertext_length On success, the size of the output in
+ * the `p_ciphertext` buffer
*
* \retval #PSA_SUCCESS
* Success.
*/
-typedef psa_status_t (*psa_aead_opaque_encrypt_t)( psa_key_slot_t key_slot,
+typedef psa_status_t (*psa_aead_opaque_encrypt_t)(psa_key_slot_t key_slot,
psa_algorithm_t algorithm,
const uint8_t *p_nonce,
size_t nonce_length,
@@ -854,167 +1160,177 @@
size_t ciphertext_size,
size_t *p_ciphertext_length);
-/** Process an authenticated decryption operation using an opaque key.
+/** Process an authenticated decryption operation using an opaque key
*
- * \param key_slot Slot containing the key to use.
- * \param algorithm The AEAD algorithm to compute
- * (\c PSA_ALG_XXX value such that
- * #PSA_ALG_IS_AEAD(\p alg) is true).
- * \param[in] p_nonce Nonce or IV to use.
- * \param nonce_length Size of the `p_nonce` buffer in bytes.
- * \param[in] p_additional_data Additional data that has been authenticated
- * but not encrypted.
- * \param additional_data_length Size of `p_additional_data` in bytes.
- * \param[in] p_ciphertext Data that has been authenticated and
- * encrypted. For algorithms where the
- * encrypted data and the authentication tag
- * are defined as separate inputs, the buffer
- * must contain the encrypted data followed
- * by the authentication tag.
- * \param ciphertext_length Size of `p_ciphertext` in bytes.
- * \param[out] p_plaintext Output buffer for the decrypted data.
- * \param plaintext_size Size of the `p_plaintext` buffer in bytes.
- * \param[out] p_plaintext_length On success, the size of the output
- * in the `p_plaintext` buffer.
+ * \param[in] key_slot Slot containing the key to use
+ * \param[in] algorithm The AEAD algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_AEAD(`alg`) is true)
+ * \param[in] p_nonce Nonce or IV to use
+ * \param[in] nonce_length Size of the `p_nonce` buffer in bytes
+ * \param[in] p_additional_data Additional data that has been
+ * authenticated but not encrypted
+ * \param[in] additional_data_length Size of `p_additional_data` in bytes
+ * \param[in] p_ciphertext Data that has been authenticated and
+ * encrypted.
+ * For algorithms where the encrypted data
+ * and the authentication tag are defined
+ * as separate inputs, the buffer must
+ * contain the encrypted data followed by
+ * the authentication tag.
+ * \param[in] ciphertext_length Size of `p_ciphertext` in bytes
+ * \param[out] p_plaintext Output buffer for the decrypted data
+ * \param[in] plaintext_size Size of the `p_plaintext` buffer in
+ * bytes
+ * \param[out] p_plaintext_length On success, the size of the output in
+ * the `p_plaintext` buffer
*
* \retval #PSA_SUCCESS
* Success.
*/
-typedef psa_status_t (*psa_aead_opaque_decrypt_t)( psa_key_slot_t key_slot,
- psa_algorithm_t algorithm,
- const uint8_t *p_nonce,
- size_t nonce_length,
- const uint8_t *p_additional_data,
- size_t additional_data_length,
- const uint8_t *p_ciphertext,
- size_t ciphertext_length,
- uint8_t *p_plaintext,
- size_t plaintext_size,
- size_t *p_plaintext_length);
+typedef psa_status_t (*psa_aead_opaque_decrypt_t)(psa_key_slot_t key_slot,
+ psa_algorithm_t algorithm,
+ const uint8_t *p_nonce,
+ size_t nonce_length,
+ const uint8_t *p_additional_data,
+ size_t additional_data_length,
+ const uint8_t *p_ciphertext,
+ size_t ciphertext_length,
+ uint8_t *p_plaintext,
+ size_t plaintext_size,
+ size_t *p_plaintext_length);
/**
- * \brief A struct containing all of the function pointers needed to implement Authenticated Encryption
- * with Additional Data operations using opaque keys
+ * \brief A struct containing all of the function pointers needed to implement
+ * Authenticated Encryption with Additional Data operations using opaque keys
*
- * PSA Crypto API implementations should populate instances of the table as appropriate upon startup.
+ * PSA Crypto API implementations should populate instances of the table as
+ * appropriate upon startup.
*
* If one of the functions is not implemented, it should be set to NULL.
*/
struct psa_aead_opaque_t {
- psa_aead_opaque_encrypt_t *p_encrypt; /**< Function that performs the AEAD encrypt operation */
- psa_aead_opaque_decrypt_t *p_decrypt; /**< Function that performs the AEAD decrypt operation */
+ /** Function that performs the AEAD encrypt operation */
+ psa_aead_opaque_encrypt_t *p_encrypt;
+ /** Function that performs the AEAD decrypt operation */
+ psa_aead_opaque_decrypt_t *p_decrypt;
};
-/** @}
- */
+/**@}*/
/** \defgroup aead_transparent AEAD Transparent
*/
+/**@{*/
/** Process an authenticated encryption operation.
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_aead_<ALGO>_encrypt
* ~~~~~~~~~~~~~
* Where `ALGO` is the name of the AEAD algorithm
*
- * \param p_key A pointer to the key material
- * \param key_length The size in bytes of the key material
- * \param alg The AEAD algorithm to compute
- * (\c PSA_ALG_XXX value such that
- * #PSA_ALG_IS_AEAD(\p alg) is true).
- * \param[in] nonce Nonce or IV to use.
- * \param nonce_length Size of the \p nonce buffer in bytes.
- * \param[in] additional_data Additional data that will be MACed
- * but not encrypted.
- * \param additional_data_length Size of \p additional_data in bytes.
- * \param[in] plaintext Data that will be MACed and
- * encrypted.
- * \param plaintext_length Size of \p plaintext in bytes.
- * \param[out] ciphertext Output buffer for the authenticated and
- * encrypted data. The additional data is not
- * part of this output. For algorithms where the
- * encrypted data and the authentication tag
- * are defined as separate outputs, the
- * authentication tag is appended to the
- * encrypted data.
- * \param ciphertext_size Size of the \p ciphertext buffer in bytes.
- * This must be at least
- * #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\p alg,
- * \p plaintext_length).
- * \param[out] ciphertext_length On success, the size of the output
- * in the \b ciphertext buffer.
+ * \param[in] p_key A pointer to the key material
+ * \param[in] key_length The size in bytes of the key material
+ * \param[in] alg The AEAD algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_AEAD(`alg`) is true)
+ * \param[in] nonce Nonce or IV to use
+ * \param[in] nonce_length Size of the `nonce` buffer in bytes
+ * \param[in] additional_data Additional data that will be MACed
+ * but not encrypted.
+ * \param[in] additional_data_length Size of `additional_data` in bytes
+ * \param[in] plaintext Data that will be MACed and
+ * encrypted.
+ * \param[in] plaintext_length Size of `plaintext` in bytes
+ * \param[out] ciphertext Output buffer for the authenticated and
+ * encrypted data. The additional data is
+ * not part of this output. For algorithms
+ * where the encrypted data and the
+ * authentication tag are defined as
+ * separate outputs, the authentication
+ * tag is appended to the encrypted data.
+ * \param[in] ciphertext_size Size of the `ciphertext` buffer in
+ * bytes
+ * This must be at least
+ * #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(`alg`,
+ * `plaintext_length`).
+ * \param[out] ciphertext_length On success, the size of the output in
+ * the `ciphertext` buffer
*
* \retval #PSA_SUCCESS
*/
-typedef psa_status_t (*psa_aead_transparent_encrypt_t)( const uint8_t *p_key,
- size_t key_length,
- psa_algorithm_t alg,
- const uint8_t *nonce,
- size_t nonce_length,
- const uint8_t *additional_data,
- size_t additional_data_length,
- const uint8_t *plaintext,
- size_t plaintext_length,
- uint8_t *ciphertext,
- size_t ciphertext_size,
- size_t *ciphertext_length );
+typedef psa_status_t (*psa_aead_transparent_encrypt_t)(const uint8_t *p_key,
+ size_t key_length,
+ psa_algorithm_t alg,
+ const uint8_t *nonce,
+ size_t nonce_length,
+ const uint8_t *additional_data,
+ size_t additional_data_length,
+ const uint8_t *plaintext,
+ size_t plaintext_length,
+ uint8_t *ciphertext,
+ size_t ciphertext_size,
+ size_t *ciphertext_length);
/** Process an authenticated decryption operation.
*
- * Functions that implement the prototype should be named in the following convention:
+ * Functions that implement the prototype should be named in the following
+ * convention:
* ~~~~~~~~~~~~~{.c}
* pcd_aead_<ALGO>_decrypt
* ~~~~~~~~~~~~~
* Where `ALGO` is the name of the AEAD algorithm
- * \param p_key A pointer to the key material
- * \param key_length The size in bytes of the key material
- * \param alg The AEAD algorithm to compute
- * (\c PSA_ALG_XXX value such that
- * #PSA_ALG_IS_AEAD(\p alg) is true).
- * \param[in] nonce Nonce or IV to use.
- * \param nonce_length Size of the \p nonce buffer in bytes.
- * \param[in] additional_data Additional data that has been MACed
- * but not encrypted.
- * \param additional_data_length Size of \p additional_data in bytes.
- * \param[in] ciphertext Data that has been MACed and
- * encrypted. For algorithms where the
- * encrypted data and the authentication tag
- * are defined as separate inputs, the buffer
- * must contain the encrypted data followed
- * by the authentication tag.
- * \param ciphertext_length Size of \p ciphertext in bytes.
- * \param[out] plaintext Output buffer for the decrypted data.
- * \param plaintext_size Size of the \p plaintext buffer in bytes.
- * This must be at least
- * #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\p alg,
- * \p ciphertext_length).
- * \param[out] plaintext_length On success, the size of the output
- * in the \b plaintext buffer.
+ * \param[in] p_key A pointer to the key material
+ * \param[in] key_length The size in bytes of the key material
+ * \param[in] alg The AEAD algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_AEAD(`alg`) is true)
+ * \param[in] nonce Nonce or IV to use
+ * \param[in] nonce_length Size of the `nonce` buffer in bytes
+ * \param[in] additional_data Additional data that has been MACed
+ * but not encrypted
+ * \param[in] additional_data_length Size of `additional_data` in bytes
+ * \param[in] ciphertext Data that has been MACed and
+ * encrypted
+ * For algorithms where the encrypted data
+ * and the authentication tag are defined
+ * as separate inputs, the buffer must
+ * contain the encrypted data followed by
+ * the authentication tag.
+ * \param[in] ciphertext_length Size of `ciphertext` in bytes
+ * \param[out] plaintext Output buffer for the decrypted data
+ * \param[in] plaintext_size Size of the `plaintext` buffer in
+ * bytes
+ * This must be at least
+ * #PSA_AEAD_DECRYPT_OUTPUT_SIZE(`alg`,
+ * `ciphertext_length`).
+ * \param[out] plaintext_length On success, the size of the output
+ * in the \b plaintext buffer
*
* \retval #PSA_SUCCESS
* Success.
*/
-typedef psa_status_t (*psa_aead_transparent_decrypt_t) ( const uint8_t *p_key,
- size_t key_length,
- psa_algorithm_t alg,
- const uint8_t *nonce,
- size_t nonce_length,
- const uint8_t *additional_data,
- size_t additional_data_length,
- const uint8_t *ciphertext,
- size_t ciphertext_length,
- uint8_t *plaintext,
- size_t plaintext_size,
- size_t *plaintext_length);
+typedef psa_status_t (*psa_aead_transparent_decrypt_t)(const uint8_t *p_key,
+ size_t key_length,
+ psa_algorithm_t alg,
+ const uint8_t *nonce,
+ size_t nonce_length,
+ const uint8_t *additional_data,
+ size_t additional_data_length,
+ const uint8_t *ciphertext,
+ size_t ciphertext_length,
+ uint8_t *plaintext,
+ size_t plaintext_size,
+ size_t *plaintext_length);
-/** @}
+/**@}*/
-/** \defgroup rng Entropy Generation
- * @{
+/** \defgroup driver_rng Entropy Generation
*/
+/**@{*/
/** \brief A hardware-specific structure for a entropy providing hardware
*/
@@ -1025,71 +1341,89 @@
/** \brief Initialize an entropy driver
*
*
- * \param p_context A hardware-specific structure containing any context information for the implementation
+ * \param[in,out] p_context A hardware-specific structure
+ * containing any context information for
+ * the implementation
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_entropy_init_t)( struct pcd_entropy_context_t *p_context );
+typedef psa_status_t (*pcd_entropy_init_t)(struct pcd_entropy_context_t *p_context);
/** \brief Get a specified number of bytes from the entropy source
*
- * Retrives `buffer_size` bytes of data from the entropy source. The entropy source will always fill the provided buffer to its full size.
- * However, most entropy sources have biases, and the actual amount of entropy contained in the buffer will be less than the number of bytes.
- * The driver will return the actual number of bytes of entropy placed in the buffer in `p_received_entropy_bytes`.
- * A PSA Crypto API implementation will likely feed the output of this function into a Digital Random Bit Generator (DRBG), and typically has
- * a minimum amount of entropy that it needs.
- * To accomplish this, the PSA Crypto implementation should be designed to call this function multiple times until it has received the required
- * amount of entropy from the entropy source.
+ * It retrives `buffer_size` bytes of data from the entropy source. The entropy
+ * source will always fill the provided buffer to its full size, however, most
+ * entropy sources have biases, and the actual amount of entropy contained in
+ * the buffer will be less than the number of bytes.
+ * The driver will return the actual number of bytes of entropy placed in the
+ * buffer in `p_received_entropy_bytes`.
+ * A PSA Crypto API implementation will likely feed the output of this function
+ * into a Digital Random Bit Generator (DRBG), and typically has a minimum
+ * amount of entropy that it needs.
+ * To accomplish this, the PSA Crypto implementation should be designed to call
+ * this function multiple times until it has received the required amount of
+ * entropy from the entropy source.
*
- * \param p_context A hardware-specific structure containing any context information for the implementation
- * \param p_buffer A caller-allocated buffer for the retrieved bytes to be placed in
- * \param buffer_size The allocated size of `p_buffer`
- * \param p_received_entropy_bytes The amount of entropy (in bytes) actually provided in `p_buffer`
+ * \param[in,out] p_context A hardware-specific structure
+ * containing any context information
+ * for the implementation
+ * \param[out] p_buffer A caller-allocated buffer for the
+ * retrieved bytes to be placed in
+ * \param[in] buffer_size The allocated size of `p_buffer`
+ * \param[out] p_received_entropy_bytes The amount of entropy (in bytes)
+ * actually provided in `p_buffer`
*
* \retval PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_entropy_get_bytes_t)( struct pcd_entropy_context_t *p_context, uint8_t *p_buffer, uint32_t buffer_size, uint32_t *p_received_entropy_bytes );
+typedef psa_status_t (*pcd_entropy_get_bytes_t)(struct pcd_entropy_context_t *p_context,
+ uint8_t *p_buffer,
+ uint32_t buffer_size,
+ uint32_t *p_received_entropy_bytes);
/**
- * \brief A struct containing all of the function pointers needed to interface to an entropy source
+ * \brief A struct containing all of the function pointers needed to interface
+ * to an entropy source
*
- * PSA Crypto API implementations should populate instances of the table as appropriate upon startup.
+ * PSA Crypto API implementations should populate instances of the table as
+ * appropriate upon startup.
*
* If one of the functions is not implemented, it should be set to NULL.
*/
struct pcd_entropy_t {
- pcd_entropy_init_t *p_init; /**< Function that performs initialization for the entropy source */
- pcd_entropy_get_bytes_t *p_get_bytes; /**< Function that performs the get_bytes operation for the entropy source */
+ /** Function that performs initialization for the entropy source */
+ pcd_entropy_init_t *p_init;
+ /** Function that performs the get_bytes operation for the entropy source
+ */
+ pcd_entropy_get_bytes_t *p_get_bytes;
};
-/** @}
- */
+/**@}*/
-/** \defgroup key_management Key Management
- * @{
+/** \defgroup driver_key_management Key Management
*/
+/**@{*/
-/** \brief Import a key in binary format.
+/** \brief Import a key in binary format
*
* This function can support any output from psa_export_key(). Refer to the
* documentation of psa_export_key() for the format for each key type.
*
- * \param key_slot Slot where the key will be stored. This must be a
- * valid slot for a key of the chosen type. It must
- * be unoccupied.
- * \param type Key type (a \c PSA_KEY_TYPE_XXX value).
- * \param[in] p_data Buffer containing the key data.
- * \param data_length Size of the \p data buffer in bytes.
+ * \param[in] key_slot Slot where the key will be stored. This must be a
+ * valid slot for a key of the chosen type. It must
+ * be unoccupied.
+ * \param[in] type Key type (a \c PSA_KEY_TYPE_XXX value).
+ * \param[in] p_data Buffer containing the key data.
+ * \param[in] data_length Size of the `data` buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
*/
-typedef psa_status_t (*pcd_opaque_import_key_t) ( psa_key_slot_t key_slot,
- psa_key_type_t type,
- const uint8_t *p_data,
- size_t data_length );
+typedef psa_status_t (*pcd_opaque_import_key_t)(psa_key_slot_t key_slot,
+ psa_key_type_t type,
+ const uint8_t *p_data,
+ size_t data_length);
/**
- * \brief Destroy a key and restore the slot to its default state.
+ * \brief Destroy a key and restore the slot to its default state
*
* This function destroys the content of the key slot from both volatile
* memory and, if applicable, non-volatile storage. Implementations shall
@@ -1099,20 +1433,20 @@
* This function also erases any metadata such as policies. It returns the
* specified slot to its default state.
*
- * \param key_slot The key slot to erase.
+ * \param[in] key_slot The key slot to erase.
*
* \retval #PSA_SUCCESS
* The slot's content, if any, has been erased.
*/
-typedef psa_status_t (*pcd_destroy_key_t)( psa_key_slot_t key );
+typedef psa_status_t (*pcd_destroy_key_t)(psa_key_slot_t key);
/**
- * \brief Export a key in binary format.
+ * \brief Export a key in binary format
*
* The output of this function can be passed to psa_import_key() to
* create an equivalent object.
*
- * If a key is created with psa_import_key() and then exported with
+ * If a key is created with `psa_import_key()` and then exported with
* this function, it is not guaranteed that the resulting data is
* identical: the implementation may choose a different representation
* of the same key if the format permits it.
@@ -1131,10 +1465,10 @@
* - For RSA public keys (#PSA_KEY_TYPE_RSA_PUBLIC_KEY), the format
* is the DER representation defined by RFC 5280 as SubjectPublicKeyInfo.
*
- * \param key Slot whose content is to be exported. This must
+ * \param[in] key Slot whose content is to be exported. This must
* be an occupied key slot.
* \param[out] p_data Buffer where the key data is to be written.
- * \param data_size Size of the `p_data` buffer in bytes.
+ * \param[in] data_size Size of the `p_data` buffer in bytes.
* \param[out] p_data_length On success, the number of bytes
* that make up the key data.
*
@@ -1146,13 +1480,13 @@
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
-typedef psa_status_t (*pcd_export_key_t)( psa_key_slot_t key,
- uint8_t *p_data,
- size_t data_size,
- size_t *p_data_length );
+typedef psa_status_t (*pcd_export_key_t)(psa_key_slot_t key,
+ uint8_t *p_data,
+ size_t data_size,
+ size_t *p_data_length);
/**
- * \brief Export a public key or the public part of a key pair in binary format.
+ * \brief Export a public key or the public part of a key pair in binary format
*
* The output of this function can be passed to psa_import_key() to
* create an object that is equivalent to the public key.
@@ -1163,125 +1497,181 @@
* the format is the DER representation of the public key defined by RFC 5280
* as SubjectPublicKeyInfo.
*
- * \param key_slot Slot whose content is to be exported. This must
+ * \param[in] key_slot Slot whose content is to be exported. This must
* be an occupied key slot.
* \param[out] p_data Buffer where the key data is to be written.
- * \param data_size Size of the \p data buffer in bytes.
+ * \param[in] data_size Size of the `data` buffer in bytes.
* \param[out] p_data_length On success, the number of bytes
* that make up the key data.
*
* \retval #PSA_SUCCESS
*/
-typedef psa_status_t (*pcd_export_public_key_t)( psa_key_slot_t key,
- uint8_t *p_data,
- size_t data_size,
- size_t *p_data_length );
+typedef psa_status_t (*pcd_export_public_key_t)(psa_key_slot_t key,
+ uint8_t *p_data,
+ size_t data_size,
+ size_t *p_data_length);
/**
- * \brief A struct containing all of the function pointers needed to for key management using
- * opaque keys.
+ * \brief A struct containing all of the function pointers needed to for key
+ * management using opaque keys
*
- * PSA Crypto API implementations should populate instances of the table as appropriate upon startup.
+ * PSA Crypto API implementations should populate instances of the table as
+ * appropriate upon startup.
*
* If one of the functions is not implemented, it should be set to NULL.
*/
struct pcd_key_management_t {
- pcd_opaque_import_key_t *p_import; /**< Function that performs the key import operation */
- pcd_destroy_key_t *p_destroy; /**< Function that performs the key destroy operation */
- pcd_export_key_t *p_export; /**< Function that performs the key export operation */
- pcd_export_public_key_t *p_export_public; /**< Function that perforsm the public key export operation */
+ /** Function that performs the key import operation */
+ pcd_opaque_import_key_t *p_import;
+ /** Function that performs the key destroy operation */
+ pcd_destroy_key_t *p_destroy;
+ /** Function that performs the key export operation */
+ pcd_export_key_t *p_export;
+ /** Function that perforsm the public key export operation */
+ pcd_export_public_key_t *p_export_public;
};
-/** @}
- */
+/**@}*/
-/** \defgroup derivation Key Derivation and Agreement
- * @{
- * Key derivation is the process of generating new key material using an existing key and additional parameters, iterating through a basic
- * cryptographic function, such as a hash.
- * Key agreement is a part of cryptographic protocols that allows two parties to agree on the same key value, but starting from different original
- * key material.
- * The flows are similar, and the PSA Crypto Driver API uses the same functions for both of the flows.
- *
- * There are two different final functions for the flows, `pcd_key_derivation_derive` and `pcd_key_derivation_export`. `pcd_key_derivation_derive`
- * is used when the key material should be placed in a slot on the hardware and not exposed to the caller. `pcd_key_derivation_export` is used
- * when the key material should be returned to the PSA Cryptographic API implementation.
- *
- * Different key derivation algorithms require a different number of inputs. Instead of having an API that
- * takes as input variable length arrays, which can be problemmatic to manage on embedded platforms, the inputs
- * are passed to the driver via a function, `pcd_key_derivation_collateral`, that is called multiple times with different `collateral_id`s.
- * Thus, for a key derivation algorithm that required 3 paramter inputs, the flow would look something like:
-```C
-pcd_key_derivation_setup(kdf_algorithm, source_key, dest_key_size_bytes);
-pcd_key_derivation_collateral(kdf_algorithm_collateral_id_0, p_collateral_0, collateral_0_size);
-pcd_key_derivation_collateral(kdf_algorithm_collateral_id_1, p_collateral_1, collateral_1_size);
-pcd_key_derivation_collateral(kdf_algorithm_collateral_id_2, p_collateral_2, collateral_2_size);
-pcd_key_derivation_derive();
-```
-
-key agreement example:
-```C
-pcd_key_derivation_setup(alg, source_key. dest_key_size_bytes);
-pcd_key_derivation_collateral(DHE_PUBKEY, p_pubkey, pubkey_size);
-pcd_key_derivation_export(p_session_key, session_key_size, &session_key_length);
-```
+/** \defgroup driver_derivation Key Derivation and Agreement
*/
-
-/** \brief Set up a key derivation operation by specifying the algorithm and the source key sot
- *
- * \param kdf_alg The algorithm to be used for the key derivation
- * \param souce_key The key to be used as the source material for the key derivation
- *
- * \retval PSA_SUCCESS
- */
-typedef psa_status_t ( *pcd_key_derivation_setup_t )( psa_algorithm_t kdf_alg, psa_key_slot_t source_key );
-
-/** \brief Provide collateral (parameters) needed for a key derivation or key agreement operation
- *
- * Since many key derivation algorithms require multiple parameters, it is expeced that this function may be called multiple
- * times for the same operation, each with a different algorithm-specific `collateral_id`
- *
- * \param collateral_id
- * \param p_collateral
- * \param collateral_size
- *
- * \retval PSA_SUCCESS
- */
-typedef psa_status_t (*pcd_key_derivation_collateral_t ) ( uint32_t collateral_id, const uint8_t p_collateral, uint32_t collateral_size );
-
-/** \brief Perform the final key derivation step and place the generated key material in a slot
- *
- * param dest_key The slot where the generated key material should be placed
- *
- * \retval PSA_SUCCESS
- */
-typedef psa_status_t ( *pcd_key_derivation_derive_t )( psa_key_slot_t dest_key );
-
-/** \brief Pefform the final step of a key agreement and place the generated key material in a buffer
- *
- * \param p_output
- * \param output_size
- * \param p_output_length
- *
- * \retval PSA_SUCCESS
- */
-typedef psa_status_t ( *pcd_key_derivation_export_t )( uint8_t *p_output, uint32_t output_size, uint32_t *p_output_length );
+/**@{*/
/**
- * \brief A struct containing all of the function pointers needed to for key derivation and agreement
+ * Key derivation is the process of generating new key material using an
+ * existing key and additional parameters, iterating through a basic
+ * cryptographic function, such as a hash.
+ * Key agreement is a part of cryptographic protocols that allows two parties
+ * to agree on the same key value, but starting from different original key
+ * material.
+ * The flows are similar, and the PSA Crypto Driver API uses the same functions
+ * for both of the flows.
*
- * PSA Crypto API implementations should populate instances of the table as appropriate upon startup.
+ * There are two different final functions for the flows,
+ * `pcd_key_derivation_derive` and `pcd_key_derivation_export`.
+ * `pcd_key_derivation_derive` is used when the key material should be placed
+ * in a slot on the hardware and not exposed to the caller.
+ * `pcd_key_derivation_export` is used when the key material should be returned
+ * to the PSA Cryptographic API implementation.
+ *
+ * Different key derivation algorithms require a different number of inputs.
+ * Instead of having an API that takes as input variable length arrays, which
+ * can be problemmatic to manage on embedded platforms, the inputs are passed
+ * to the driver via a function, `pcd_key_derivation_collateral`, that is
+ * called multiple times with different `collateral_id`s. Thus, for a key
+ * derivation algorithm that required 3 paramter inputs, the flow would look
+ * something like:
+ * ~~~~~~~~~~~~~{.c}
+ * pcd_key_derivation_setup(kdf_algorithm, source_key, dest_key_size_bytes);
+ * pcd_key_derivation_collateral(kdf_algorithm_collateral_id_0,
+ * p_collateral_0,
+ * collateral_0_size);
+ * pcd_key_derivation_collateral(kdf_algorithm_collateral_id_1,
+ * p_collateral_1,
+ * collateral_1_size);
+ * pcd_key_derivation_collateral(kdf_algorithm_collateral_id_2,
+ * p_collateral_2,
+ * collateral_2_size);
+ * pcd_key_derivation_derive();
+ * ~~~~~~~~~~~~~
+ *
+ * key agreement example:
+ * ~~~~~~~~~~~~~{.c}
+ * pcd_key_derivation_setup(alg, source_key. dest_key_size_bytes);
+ * pcd_key_derivation_collateral(DHE_PUBKEY, p_pubkey, pubkey_size);
+ * pcd_key_derivation_export(p_session_key,
+ * session_key_size,
+ * &session_key_length);
+ * ~~~~~~~~~~~~~
+ */
+
+struct pcd_key_derivation_context_t {
+ // Implementation specific
+};
+
+/** \brief Set up a key derivation operation by specifying the algorithm and
+ * the source key sot
+ *
+ * \param[in,out] p_context A hardware-specific structure containing any
+ * context information for the implementation
+ * \param[in] kdf_alg The algorithm to be used for the key derivation
+ * \param[in] souce_key The key to be used as the source material for the
+ * key derivation
+ *
+ * \retval PSA_SUCCESS
+ */
+typedef psa_status_t (*pcd_key_derivation_setup_t)(struct pcd_key_derivation_context_t *p_context,
+ psa_algorithm_t kdf_alg,
+ psa_key_slot_t source_key);
+
+/** \brief Provide collateral (parameters) needed for a key derivation or key
+ * agreement operation
+ *
+ * Since many key derivation algorithms require multiple parameters, it is
+ * expeced that this function may be called multiple times for the same
+ * operation, each with a different algorithm-specific `collateral_id`
+ *
+ * \param[in,out] p_context A hardware-specific structure containing any
+ * context information for the implementation
+ * \param[in] collateral_id An ID for the collateral being provided
+ * \param[in] p_collateral A buffer containing the collateral data
+ * \param[in] collateral_size The size in bytes of the collateral
+ *
+ * \retval PSA_SUCCESS
+ */
+typedef psa_status_t (*pcd_key_derivation_collateral_t)(struct pcd_key_derivation_context_t *p_context,
+ uint32_t collateral_id,
+ const uint8_t p_collateral,
+ size_t collateral_size);
+
+/** \brief Perform the final key derivation step and place the generated key
+ * material in a slot
+ * \param[in,out] p_context A hardware-specific structure containing any
+ * context information for the implementation
+ * \param[in] dest_key The slot where the generated key material
+ * should be placed
+ *
+ * \retval PSA_SUCCESS
+ */
+typedef psa_status_t (*pcd_key_derivation_derive_t)(struct pcd_key_derivation_context_t *p_context,
+ psa_key_slot_t dest_key);
+
+/** \brief Perform the final step of a key agreement and place the generated
+ * key material in a buffer
+ *
+ * \param[out] p_output Buffer in which to place the generated key
+ * material
+ * \param[in] output_size The size in bytes of `p_output`
+ * \param[out] p_output_length Upon success, contains the number of bytes of
+ * key material placed in `p_output`
+ *
+ * \retval PSA_SUCCESS
+ */
+typedef psa_status_t (*pcd_key_derivation_export_t)(uint8_t *p_output,
+ size_t output_size,
+ size_t *p_output_length);
+
+/**
+ * \brief A struct containing all of the function pointers needed to for key
+ * derivation and agreement
+ *
+ * PSA Crypto API implementations should populate instances of the table as
+ * appropriate upon startup.
*
* If one of the functions is not implemented, it should be set to NULL.
*/
struct pcd_key_derivation_t {
- pcd_key_derivation_setup_t *p_setup; /**< Function that performs the key derivation setup */
- pcd_key_derivation_collateral_t *p_collateral; /**< Function that sets the key derivation collateral */
- pcd_key_derivation_derive_t *p_derive; /**< Function that performs the final key derivation step */
- pcd_key_derivation_export_t *p_export; /**< Function that perforsm the final key derivation or agreement and exports the key */
+ /** Function that performs the key derivation setup */
+ pcd_key_derivation_setup_t *p_setup;
+ /** Function that sets the key derivation collateral */
+ pcd_key_derivation_collateral_t *p_collateral;
+ /** Function that performs the final key derivation step */
+ pcd_key_derivation_derive_t *p_derive;
+ /** Function that perforsm the final key derivation or agreement and
+ * exports the key */
+ pcd_key_derivation_export_t *p_export;
};
-/** @}
- */
+/**@}*/
#endif // __PSA_CRYPTO_DRIVER_H__
\ No newline at end of file