diff --git a/tests/configs/user-config-for-test.h b/tests/configs/user-config-for-test.h
new file mode 100644
index 0000000..444a4bf
--- /dev/null
+++ b/tests/configs/user-config-for-test.h
@@ -0,0 +1,57 @@
+/* MBEDTLS_USER_CONFIG_FILE for testing.
+ * Only used for a few test configurations.
+ *
+ * Typical usage (note multiple levels of quoting):
+ *     make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'"
+ */
+
+/*
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+#if defined(PSA_CRYPTO_DRIVER_TEST_ALL)
+
+/* Enable the use of the test driver in the library, and build the generic
+ * part of the test driver. */
+#define PSA_CRYPTO_DRIVER_TEST
+
+/* Use the accelerator driver for all cryptographic mechanisms for which
+ * the test driver implemented. */
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_AES
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_CAMELLIA
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR
+#define MBEDTLS_PSA_ACCEL_ALG_CBC_NO_PADDING
+#define MBEDTLS_PSA_ACCEL_ALG_CBC_PKCS7
+#define MBEDTLS_PSA_ACCEL_ALG_CTR
+#define MBEDTLS_PSA_ACCEL_ALG_CFB
+#define MBEDTLS_PSA_ACCEL_ALG_ECDSA
+#define MBEDTLS_PSA_ACCEL_ALG_DETERMINISTIC_ECDSA
+#define MBEDTLS_PSA_ACCEL_ALG_MD5
+#define MBEDTLS_PSA_ACCEL_ALG_OFB
+#define MBEDTLS_PSA_ACCEL_ALG_RIPEMD160
+#define MBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN
+#define MBEDTLS_PSA_ACCEL_ALG_RSA_PSS
+#define MBEDTLS_PSA_ACCEL_ALG_SHA_1
+#define MBEDTLS_PSA_ACCEL_ALG_SHA_224
+#define MBEDTLS_PSA_ACCEL_ALG_SHA_256
+#define MBEDTLS_PSA_ACCEL_ALG_SHA_384
+#define MBEDTLS_PSA_ACCEL_ALG_SHA_512
+#define MBEDTLS_PSA_ACCEL_ALG_XTS
+#define MBEDTLS_PSA_ACCEL_ALG_CMAC
+#define MBEDTLS_PSA_ACCEL_ALG_HMAC
+
+#endif  /* PSA_CRYPTO_DRIVER_TEST_ALL */
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 583743c..3294a6a 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -1560,31 +1560,8 @@
     scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_KEY_TYPE_DES
     scripts/config.py unset MBEDTLS_DES_C
 
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    loc_cflags="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_KEY_TYPE_AES"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_KEY_TYPE_CAMELLIA"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_CBC_NO_PADDING"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_CBC_PKCS7"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_CTR"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_CFB"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_ECDSA"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_DETERMINISTIC_ECDSA"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_MD5"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_OFB"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_RIPEMD160"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_RSA_PSS"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_SHA_1"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_SHA_224"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_SHA_256"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_SHA_384"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_SHA_512"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_XTS"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_CMAC"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_HMAC"
+    loc_cflags="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST_ALL"
+    loc_cflags="${loc_cflags} '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'"
     loc_cflags="${loc_cflags} -I../tests/include -O2"
 
     make CC=gcc CFLAGS="$loc_cflags" LDFLAGS="$ASAN_CFLAGS"
@@ -2237,31 +2214,8 @@
     scripts/config.py full
     scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
     scripts/config.py set MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    loc_cflags="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_KEY_TYPE_AES"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_KEY_TYPE_CAMELLIA"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_CBC_NO_PADDING"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_CBC_PKCS7"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_CTR"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_CFB"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_ECDSA"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_DETERMINISTIC_ECDSA"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_MD5"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_OFB"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_RIPEMD160"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_RSA_PSS"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_SHA_1"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_SHA_224"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_SHA_256"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_SHA_384"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_SHA_512"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_XTS"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_CMAC"
-    loc_cflags="${loc_cflags} -DMBEDTLS_PSA_ACCEL_ALG_HMAC"
+    loc_cflags="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST_ALL"
+    loc_cflags="${loc_cflags} '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'"
     loc_cflags="${loc_cflags} -I../tests/include -O2"
 
     make CC=gcc CFLAGS="${loc_cflags}" LDFLAGS="$ASAN_CFLAGS"