ssl-opt.sh: change expected pattern from 'resend' to 'autoreduction'
diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index f70a85c..079b0f6 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -5551,21 +5551,21 @@
# Tests for client reconnecting from the same port with DTLS
-not_with_valgrind # spurious resend
+not_with_valgrind # spurious autoreduction
run_test "DTLS client reconnect from same port: reference" \
"$P_SRV dtls=1 exchanges=2 read_timeout=1000" \
"$P_CLI dtls=1 exchanges=2 debug_level=2 hs_timeout=500-1000" \
0 \
- -C "resend" \
+ -C "autoreduction" \
-S "The operation timed out" \
-S "Client initiated reconnection from same port"
-not_with_valgrind # spurious resend
+not_with_valgrind # spurious autoreduction
run_test "DTLS client reconnect from same port: reconnect" \
"$P_SRV dtls=1 exchanges=2 read_timeout=1000" \
"$P_CLI dtls=1 exchanges=2 debug_level=2 hs_timeout=500-1000 reconnect_hard=1" \
0 \
- -C "resend" \
+ -C "autoreduction" \
-S "The operation timed out" \
-s "Client initiated reconnection from same port"
@@ -6002,7 +6002,7 @@
# the proxy shouldn't drop or mess up anything, so we shouldn't need to resend
# OTOH the client might resend if the server is to slow to reset after sending
# a HelloVerifyRequest, so only check for no retransmission server-side
-not_with_valgrind # spurious resend due to timeout
+not_with_valgrind # spurious autoreduction due to timeout
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
@@ -6019,12 +6019,12 @@
hs_timeout=10000-60000 \
mtu=1024" \
0 \
- -S "resend" \
+ -S "autoreduction" \
-s "found fragmented DTLS handshake message" \
-c "found fragmented DTLS handshake message" \
-C "error"
-not_with_valgrind # spurious resend due to timeout
+not_with_valgrind # spurious autoreduction due to timeout
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
@@ -6041,7 +6041,7 @@
mtu=1024 nbio=2 \
hs_timeout=15000-60000" \
0 \
- -S "resend" \
+ -S "autoreduction" \
-s "found fragmented DTLS handshake message" \
-c "found fragmented DTLS handshake message" \
-C "error"
@@ -6051,11 +6051,11 @@
# Since we don't support reading fragmented ClientHello yet,
# up the MTU to 1450 (larger than ClientHello with session ticket,
# but still smaller than client's Certificate to ensure fragmentation).
-# A resend on the client-side might happen if the server is
-# slow to reset, therefore omitting '-C "resend"' below.
+# An autoreduction on the client-side might happen if the server is
+# slow to reset, therefore omitting '-C "autoreduction"' below.
# reco_delay avoids races where the client reconnects before the server has
-# resumed listening, which would result in a spurious resend.
-not_with_valgrind # spurious resend due to timeout
+# resumed listening, which would result in a spurious autoreduction.
+not_with_valgrind # spurious autoreduction due to timeout
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
@@ -6072,14 +6072,14 @@
hs_timeout=10000-60000 \
mtu=1650 reconnect=1 reco_delay=1" \
0 \
- -S "resend" \
+ -S "autoreduction" \
-s "found fragmented DTLS handshake message" \
-c "found fragmented DTLS handshake message" \
-C "error"
-# A resend on the client-side might happen if the server is
-# slow to reset, therefore omitting '-C "resend"' below.
-not_with_valgrind # spurious resend due to timeout
+# An autoreduction on the client-side might happen if the server is
+# slow to reset, therefore omitting '-C "autoreduction"' below.
+not_with_valgrind # spurious autoreduction due to timeout
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
@@ -6103,14 +6103,14 @@
hs_timeout=10000-60000 \
mtu=1024" \
0 \
- -S "resend" \
+ -S "autoreduction" \
-s "found fragmented DTLS handshake message" \
-c "found fragmented DTLS handshake message" \
-C "error"
-# A resend on the client-side might happen if the server is
-# slow to reset, therefore omitting '-C "resend"' below.
-not_with_valgrind # spurious resend due to timeout
+# An autoreduction on the client-side might happen if the server is
+# slow to reset, therefore omitting '-C "autoreduction"' below.
+not_with_valgrind # spurious autoreduction due to timeout
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
@@ -6135,14 +6135,14 @@
hs_timeout=10000-60000 \
mtu=1024" \
0 \
- -S "resend" \
+ -S "autoreduction" \
-s "found fragmented DTLS handshake message" \
-c "found fragmented DTLS handshake message" \
-C "error"
-# A resend on the client-side might happen if the server is
-# slow to reset, therefore omitting '-C "resend"' below.
-not_with_valgrind # spurious resend due to timeout
+# An autoreduction on the client-side might happen if the server is
+# slow to reset, therefore omitting '-C "autoreduction"' below.
+not_with_valgrind # spurious autoreduction due to timeout
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
@@ -6167,14 +6167,14 @@
hs_timeout=10000-60000 \
mtu=1024" \
0 \
- -S "resend" \
+ -S "autoreduction" \
-s "found fragmented DTLS handshake message" \
-c "found fragmented DTLS handshake message" \
-C "error"
-# A resend on the client-side might happen if the server is
-# slow to reset, therefore omitting '-C "resend"' below.
-not_with_valgrind # spurious resend due to timeout
+# An autoreduction on the client-side might happen if the server is
+# slow to reset, therefore omitting '-C "autoreduction"' below.
+not_with_valgrind # spurious autoreduction due to timeout
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
@@ -6200,14 +6200,14 @@
hs_timeout=10000-60000 \
mtu=1024" \
0 \
- -S "resend" \
+ -S "autoreduction" \
-s "found fragmented DTLS handshake message" \
-c "found fragmented DTLS handshake message" \
-C "error"
-# A resend on the client-side might happen if the server is
-# slow to reset, therefore omitting '-C "resend"' below.
-not_with_valgrind # spurious resend due to timeout
+# An autoreduction on the client-side might happen if the server is
+# slow to reset, therefore omitting '-C "autoreduction"' below.
+not_with_valgrind # spurious autoreduction due to timeout
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
@@ -6232,7 +6232,7 @@
hs_timeout=10000-60000 \
mtu=1024" \
0 \
- -S "resend" \
+ -S "autoreduction" \
-s "found fragmented DTLS handshake message" \
-c "found fragmented DTLS handshake message" \
-C "error"
@@ -6555,7 +6555,7 @@
# Tests for specific things with "unreliable" UDP connection
-not_with_valgrind # spurious resend due to timeout
+not_with_valgrind # spurious autoreduction due to timeout
run_test "DTLS proxy: reference" \
-p "$P_PXY" \
"$P_SRV dtls=1 debug_level=2" \
@@ -6567,11 +6567,11 @@
-S "record from another epoch" \
-C "discarding invalid record" \
-S "discarding invalid record" \
- -S "resend" \
+ -S "autoreduction" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
-not_with_valgrind # spurious resend due to timeout
+not_with_valgrind # spurious autoreduction due to timeout
run_test "DTLS proxy: duplicate every packet" \
-p "$P_PXY duplicate=1" \
"$P_SRV dtls=1 dgram_packing=0 debug_level=2" \
@@ -6581,7 +6581,7 @@
-s "replayed record" \
-c "record from another epoch" \
-s "record from another epoch" \
- -S "resend" \
+ -S "autoreduction" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"