diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index bafca0a..d24da47 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -2410,6 +2410,113 @@
     tests/ssl-opt.sh
 }
 
+# Auxiliary function to build config for all EC based algorithms (EC-JPAKE,
+# ECDH, ECDSA) with and without drivers.
+#
+# This is used by the two following components to ensure they always use the
+# same config, except for the use of driver or built-in EC algorithms:
+# - component_test_psa_crypto_config_accel_all_ec_algs_use_psa;
+# - component_test_psa_crypto_config_reference_all_ec_algs_use_psa.
+# This support comparing their test coverage with analyze_outcomes.py.
+config_psa_crypto_config_all_ec_algs_use_psa () {
+    DRIVER_ONLY="$1"
+    # start with config full for maximum coverage (also enables USE_PSA)
+    scripts/config.py full
+    # enable support for drivers and configuring PSA-only algorithms
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
+    if [ "$DRIVER_ONLY" -eq 1 ]; then
+        # Disable modules that are accelerated
+        scripts/config.py unset MBEDTLS_ECDSA_C
+        scripts/config.py unset MBEDTLS_ECDH_C
+        scripts/config.py unset MBEDTLS_ECJPAKE_C
+    fi
+
+    # Restartable feature is not yet supported by PSA. Once it will in
+    # the future, the following line could be removed (see issues
+    # 6061, 6332 and following ones)
+    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
+    # Dynamic secure element support is a deprecated feature and needs to be disabled here.
+    # This is done to have the same form of psa_key_attributes_s for libdriver and library.
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+}
+
+# Keep in sync with component_test_psa_crypto_config_reference_all_ec_algs_use_psa
+component_test_psa_crypto_config_accel_all_ec_algs_use_psa () {
+    msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated EC algs + USE_PSA"
+
+    # Algorithms and key types to accelerate
+    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
+                    ALG_ECDH \
+                    ALG_JPAKE \
+                    KEY_TYPE_ECC_KEY_PAIR KEY_TYPE_ECC_PUBLIC_KEY"
+
+    # Configure and build the test driver library
+    # -------------------------------------------
+
+    # Disable ALG_STREAM_CIPHER and ALG_ECB_NO_PADDING to avoid having
+    # partial support for cipher operations in the driver test library.
+    scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER
+    scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING
+
+    loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
+    # SHA-1 and all variants of SHA-2 are needed for ECDSA and X.509 tests.
+    # Note = we are NOT adding these ALG_SHA_xxx to the "loc_accel_flags" list
+    #       because we need that support on the driver side (ex: hash-and-sign
+    #       algorithms), but we do not want to accelerate other hash only tests.
+    #       Indeed the same "loc_accel_list" variable is also used later when
+    #       building the library.
+    loc_accel_flags="$loc_accel_flags -DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_ALG_SHA_1"
+    loc_accel_flags="$loc_accel_flags -DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_ALG_SHA_224"
+    loc_accel_flags="$loc_accel_flags -DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_ALG_SHA_256"
+    loc_accel_flags="$loc_accel_flags -DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_ALG_SHA_384"
+    loc_accel_flags="$loc_accel_flags -DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_ALG_SHA_512"
+    make -C tests libtestdriver1.a CFLAGS="$ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
+
+    # Configure and build the main libraries with drivers enabled
+    # -----------------------------------------------------------
+
+    # Use the same config as reference, only without built-in EC algs
+    config_psa_crypto_config_all_ec_algs_use_psa 1
+
+    # Build the library
+    loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
+    make CFLAGS="$ASAN_CFLAGS -Werror -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS"
+
+    # Make sure any built-in EC alg was not re-enabled by accident (additive config)
+    not grep mbedtls_ecdsa_ library/ecdsa.o
+    not grep mbedtls_ecdh_ library/ecdh.o
+    not grep mbedtls_ecjpake_ library/ecjpake.o
+
+    # Run the tests
+    # -------------
+
+    msg "test suites: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated EC algs + USE_PSA"
+    make test
+
+    msg "ssl-opt: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated EC algs + USE_PSA"
+    tests/ssl-opt.sh
+}
+
+# Keep in sync with component_test_psa_crypto_config_accel_all_ec_algs_use_psa
+component_test_psa_crypto_config_reference_all_ec_algs_use_psa () {
+    msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs + USE_PSA"
+
+    # To be aligned with the accel component that needs this
+    scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER
+    scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING
+
+    config_psa_crypto_config_all_ec_algs_use_psa 0
+
+    make
+
+    msg "test suites: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs + USE_PSA"
+    make test
+
+    msg "ssl-opt: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs + USE_PSA"
+    tests/ssl-opt.sh
+}
+
 component_test_psa_crypto_config_accel_ecc () {
     msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECC"