test: renaming component testing accelerated EC
References in analyze_outcomes.py are updated accordingly.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 8627f33..a28cd28 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -2323,10 +2323,10 @@
#
# This is used by the two following components to ensure they always use the
# same config, except for the use of driver or built-in EC algorithms:
-# - component_test_psa_crypto_config_accel_all_ec_algs_use_psa;
-# - component_test_psa_crypto_config_reference_all_ec_algs_use_psa.
+# - component_test_psa_crypto_config_accel_ecc_ecp_light_only;
+# - component_test_psa_crypto_config_reference_ecc_ecp_light_only.
# This supports comparing their test coverage with analyze_outcomes.py.
-config_psa_crypto_config_all_ec_algs_use_psa () {
+config_psa_crypto_config_ecp_ligh_only () {
DRIVER_ONLY="$1"
# start with config full for maximum coverage (also enables USE_PSA)
helper_libtestdriver1_adjust_config "full"
@@ -2344,8 +2344,8 @@
scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
}
-# Keep in sync with component_test_psa_crypto_config_reference_all_ec_algs_use_psa
-component_test_psa_crypto_config_accel_all_ec_algs_use_psa () {
+# Keep in sync with component_test_psa_crypto_config_reference_ecc_ecp_light_only
+component_test_psa_crypto_config_accel_ecc_ecp_light_only () {
msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated EC algs + USE_PSA"
# Algorithms and key types to accelerate
@@ -2358,7 +2358,7 @@
# ---------
# Use the same config as reference, only without built-in EC algs
- config_psa_crypto_config_all_ec_algs_use_psa 1
+ config_psa_crypto_config_ecp_ligh_only 1
# Temporary hack to enable MBEDTLS_ECP_LIGHT
# (will soon be auto-enabled in build_info.h)
@@ -2389,11 +2389,11 @@
tests/ssl-opt.sh
}
-# Keep in sync with component_test_psa_crypto_config_accel_all_ec_algs_use_psa
-component_test_psa_crypto_config_reference_all_ec_algs_use_psa () {
+# Keep in sync with component_test_psa_crypto_config_accel_ecc_ecp_light_only
+component_test_psa_crypto_config_reference_ecc_ecp_light_only () {
msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs + USE_PSA"
- config_psa_crypto_config_all_ec_algs_use_psa 0
+ config_psa_crypto_config_ecp_ligh_only 0
make
@@ -2405,8 +2405,8 @@
}
# This helper function is used by:
-# - component_test_psa_crypto_full_accel_all_ec_algs_no_ecp_use_psa()
-# - component_test_psa_crypto_full_reference_all_ec_algs_no_ecp_use_psa()
+# - component_test_psa_crypto_config_accel_ecc_no_ecp_at_all()
+# - component_test_psa_crypto_config_reference_ecc_no_ecp_at_all()
# to ensure that both tests use the same underlying configuration when testing
# driver's coverage with analyze_outcomes.py.
#
@@ -2417,7 +2417,7 @@
#
# PK_C and RSA_C are always disabled to ensure there is no remaining dependency
# on the ECP module.
-config_psa_crypto_full_all_ec_algs_no_ecp_use_psa () {
+config_psa_crypto_no_ecp_at_all () {
DRIVER_ONLY="$1"
# start with crypto_full config for maximum coverage (also enables USE_PSA),
# but excluding X509, TLS and key exchanges
@@ -2471,8 +2471,8 @@
# all support and dependencies from ECP and ECP_LIGHT are removed on the library
# side.
#
-# Keep in sync with component_test_psa_crypto_full_reference_all_ec_algs_no_ecp_use_psa()
-component_test_psa_crypto_full_accel_all_ec_algs_no_ecp_use_psa () {
+# Keep in sync with component_test_psa_crypto_config_reference_ecc_no_ecp_at_all()
+component_test_psa_crypto_config_accel_ecc_no_ecp_at_all () {
msg "build: crypto_full + accelerated EC algs + USE_PSA - ECP"
# Algorithms and key types to accelerate
@@ -2485,7 +2485,7 @@
# ---------
# Set common configurations between library's and driver's builds
- config_psa_crypto_full_all_ec_algs_no_ecp_use_psa 1
+ config_psa_crypto_no_ecp_at_all 1
# Build
# -----
@@ -2514,12 +2514,12 @@
}
# Reference function used for driver's coverage analysis in analyze_outcomes.py
-# in conjunction with component_test_psa_crypto_full_accel_all_ec_algs_no_ecp_use_psa().
+# in conjunction with component_test_psa_crypto_config_accel_ecc_no_ecp_at_all().
# Keep in sync with its accelerated counterpart.
-component_test_psa_crypto_full_reference_all_ec_algs_no_ecp_use_psa () {
+component_test_psa_crypto_config_reference_ecc_no_ecp_at_all () {
msg "build: crypto_full + non accelerated EC algs + USE_PSA"
- config_psa_crypto_full_all_ec_algs_no_ecp_use_psa 0
+ config_psa_crypto_no_ecp_at_all 0
make
diff --git a/tests/scripts/analyze_outcomes.py b/tests/scripts/analyze_outcomes.py
index 0238555..f581850 100755
--- a/tests/scripts/analyze_outcomes.py
+++ b/tests/scripts/analyze_outcomes.py
@@ -196,11 +196,11 @@
}
}
},
- 'analyze_driver_vs_reference_all_ec_algs': {
+ 'analyze_driver_vs_reference_ecp_light_only': {
'test_function': do_analyze_driver_vs_reference,
'args': {
- 'component_ref': 'test_psa_crypto_config_reference_all_ec_algs_use_psa',
- 'component_driver': 'test_psa_crypto_config_accel_all_ec_algs_use_psa',
+ 'component_ref': 'test_psa_crypto_config_reference_ecc_ecp_light_only',
+ 'component_driver': 'test_psa_crypto_config_accel_ecc_ecp_light_only',
'ignored_suites': [
'ecdsa',
'ecdh',
@@ -265,11 +265,11 @@
}
}
},
- 'analyze_driver_vs_reference_all_ec_algs_no_ecp': {
+ 'analyze_driver_vs_reference_no_ecp_at_all': {
'test_function': do_analyze_driver_vs_reference,
'args': {
- 'component_ref': 'test_psa_crypto_full_reference_all_ec_algs_no_ecp_use_psa',
- 'component_driver': 'test_psa_crypto_full_accel_all_ec_algs_no_ecp_use_psa',
+ 'component_ref': 'test_psa_crypto_config_reference_ecc_no_ecp_at_all',
+ 'component_driver': 'test_psa_crypto_config_accel_ecc_no_ecp_at_all',
'ignored_suites': [
# Ignore test suites for the modules that are disabled in the
# accelerated test case.