diff --git a/tests/scripts/all-core.sh b/tests/scripts/all-core.sh
deleted file mode 100644
index 5cb1da8..0000000
--- a/tests/scripts/all-core.sh
+++ /dev/null
@@ -1,1031 +0,0 @@
-# all-core.sh
-#
-# Copyright The Mbed TLS Contributors
-# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
-
-################################################################
-#### Documentation
-################################################################
-
-# Purpose
-# -------
-#
-# To run all tests possible or available on the platform.
-#
-# Files structure
-# ---------------
-#
-# The executable entry point for users and the CI is tests/scripts/all.sh.
-#
-# The actual content is in the following files:
-# - all-core.sh contains the core logic for running test components,
-#   processing command line options, reporting results, etc.
-# - all-helpers.sh contains helper functions used by more than 1 component.
-# - components-*.sh contain the definitions of the various components.
-#
-# The first two parts are shared between repos and branches;
-# the component files are repo&branch-specific.
-#
-# The files all-*.sh and components-*.sh should only define functions and not
-# run code when sourced; the only exception being that all-core.sh runs
-# 'shopt' because that is necessary for the rest of the file to parse.
-#
-# Notes for users
-# ---------------
-#
-# Warning: the test is destructive. It includes various build modes and
-# configurations, and can and will arbitrarily change the current CMake
-# configuration. The following files must be committed into git:
-#    * include/mbedtls/mbedtls_config.h
-#    * Makefile, library/Makefile, programs/Makefile, tests/Makefile,
-#      programs/fuzz/Makefile
-# After running this script, the CMake cache will be lost and CMake
-# will no longer be initialised.
-#
-# The script assumes the presence of a number of tools:
-#   * Basic Unix tools (Windows users note: a Unix-style find must be before
-#     the Windows find in the PATH)
-#   * Perl
-#   * GNU Make
-#   * CMake
-#   * GCC and Clang (recent enough for using ASan with gcc and MemSan with clang, or valgrind)
-#   * G++
-#   * arm-gcc and mingw-gcc
-#   * ArmCC 6 (aka armclang), unless invoked with --no-armcc
-#   * OpenSSL and GnuTLS command line tools, in suitable versions for the
-#     interoperability tests. The following are the official versions at the
-#     time of writing:
-#     * GNUTLS_{CLI,SERV} = 3.4.10
-#     * GNUTLS_NEXT_{CLI,SERV} = 3.7.2
-#     * OPENSSL = 1.0.2g (without Debian/Ubuntu patches)
-#     * OPENSSL_NEXT = 3.1.2
-# See the invocation of check_tools below for details.
-#
-# This script must be invoked from the toplevel directory of a git
-# working copy of Mbed TLS.
-#
-# The behavior on an error depends on whether --keep-going (alias -k)
-# is in effect.
-#  * Without --keep-going: the script stops on the first error without
-#    cleaning up. This lets you work in the configuration of the failing
-#    component.
-#  * With --keep-going: the script runs all requested components and
-#    reports failures at the end. In particular the script always cleans
-#    up on exit.
-#
-# Note that the output is not saved. You may want to run
-#   script -c tests/scripts/all.sh
-# or
-#   tests/scripts/all.sh >all.log 2>&1
-#
-# Notes for maintainers
-# ---------------------
-#
-# The bulk of the code is organized into functions that follow one of the
-# following naming conventions:
-# * in all-core.sh:
-#   * pre_XXX: things to do before running the tests, in order.
-#   * post_XXX: things to do after running the tests.
-# * in components-*.sh:
-#   * component_XXX: independent components. They can be run in any order.
-#     * component_check_XXX: quick tests that aren't worth parallelizing.
-#     * component_build_XXX: build things but don't run them.
-#     * component_test_XXX: build and test.
-#     * component_release_XXX: tests that the CI should skip during PR testing.
-#   * support_XXX: if support_XXX exists and returns false then
-#     component_XXX is not run by default.
-# * in various files:
-#   * other: miscellaneous support functions.
-#
-# Each component must start by invoking `msg` with a short informative message.
-#
-# Warning: due to the way bash detects errors, the failure of a command
-# inside 'if' or '!' is not detected. Use the 'not' function instead of '!'.
-#
-# Each component is executed in a separate shell process. The component
-# fails if any command in it returns a non-zero status.
-#
-# The framework performs some cleanup tasks after each component. This
-# means that components can assume that the working directory is in a
-# cleaned-up state, and don't need to perform the cleanup themselves.
-# * Run `make clean`.
-# * Restore the various config files (potentially modified by config.py) from
-#   a backup made when starting the script.
-# * If in Mbed TLS, restore the various `Makefile`s (potentially modified by
-#   in-tree use of CMake) from a backup made when starting the script. (Note:
-#   if the files look generated when starting the script, they will be
-#   restored from the git index before making the backup.)
-
-
-################################################################
-#### Initialization and command line parsing
-################################################################
-
-# Enable ksh/bash extended file matching patterns.
-# Must come before function definitions or some of them wouldn't parse.
-shopt -s extglob
-
-pre_set_shell_options () {
-    # Abort on errors (even on the left-hand side of a pipe).
-    # Treat uninitialised variables as errors.
-    set -e -o pipefail -u
-}
-
-# For project detection
-in_mbedtls_repo () {
-    test "$PROJECT_NAME" = "Mbed TLS"
-}
-
-in_tf_psa_crypto_repo () {
-    test "$PROJECT_NAME" = "TF-PSA-Crypto"
-}
-
-pre_check_environment () {
-    # For project detection
-    PROJECT_NAME_FILE='./scripts/project_name.txt'
-    if read -r PROJECT_NAME < "$PROJECT_NAME_FILE"; then :; else
-        echo "$PROJECT_NAME_FILE does not exist... Exiting..." >&2
-        exit 1
-    fi
-
-    if in_mbedtls_repo || in_tf_psa_crypto_repo; then :; else
-        echo "Must be run from Mbed TLS / TF-PSA-Crypto root" >&2
-        exit 1
-    fi
-}
-
-# Must be called before pre_initialize_variables which sets ALL_COMPONENTS.
-pre_load_components () {
-    # Include the components from components.sh
-    # Use a path relative to the current directory, aka project's root.
-    for file in tests/scripts/components-*.sh; do
-        source $file
-    done
-}
-
-pre_initialize_variables () {
-    if in_mbedtls_repo; then
-        CONFIG_H='include/mbedtls/mbedtls_config.h'
-        CONFIG_TEST_DRIVER_H='tests/include/test/drivers/config_test_driver.h'
-        if [ -d tf-psa-crypto ]; then
-            CRYPTO_CONFIG_H='tf-psa-crypto/include/psa/crypto_config.h'
-            PSA_CORE_PATH='tf-psa-crypto/core'
-            BUILTIN_SRC_PATH='tf-psa-crypto/drivers/builtin/src'
-        else
-            CRYPTO_CONFIG_H='include/psa/crypto_config.h'
-            # helper_armc6_build_test() relies on these being defined,
-            # but empty if the paths don't exist (as in 3.6).
-            PSA_CORE_PATH=''
-            BUILTIN_SRC_PATH=''
-        fi
-        config_files="$CONFIG_H $CRYPTO_CONFIG_H $CONFIG_TEST_DRIVER_H"
-    else
-        CRYPTO_CONFIG_H='include/psa/crypto_config.h'
-        PSA_CORE_PATH='core'
-        BUILTIN_SRC_PATH='drivers/builtin/src'
-
-        config_files="$CRYPTO_CONFIG_H"
-    fi
-
-    # Files that are clobbered by some jobs will be backed up. Use a different
-    # suffix from auxiliary scripts so that all.sh and auxiliary scripts can
-    # independently decide when to remove the backup file.
-    backup_suffix='.all.bak'
-    # Files clobbered by config.py
-    files_to_back_up="$config_files"
-    if in_mbedtls_repo; then
-        # Files clobbered by in-tree cmake
-        files_to_back_up="$files_to_back_up Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile"
-    fi
-
-    append_outcome=0
-    MEMORY=0
-    FORCE=0
-    QUIET=0
-    KEEP_GOING=0
-
-    # Seed value used with the --release-test option.
-    #
-    # See also RELEASE_SEED in basic-build-test.sh. Debugging is easier if
-    # both values are kept in sync. If you change the value here because it
-    # breaks some tests, you'll definitely want to change it in
-    # basic-build-test.sh as well.
-    RELEASE_SEED=1
-
-    # Specify character collation for regular expressions and sorting with C locale
-    export LC_COLLATE=C
-
-    : ${MBEDTLS_TEST_OUTCOME_FILE=}
-    : ${MBEDTLS_TEST_PLATFORM="$(uname -s | tr -c \\n0-9A-Za-z _)-$(uname -m | tr -c \\n0-9A-Za-z _)"}
-    export MBEDTLS_TEST_OUTCOME_FILE
-    export MBEDTLS_TEST_PLATFORM
-
-    # Default commands, can be overridden by the environment
-    : ${OPENSSL:="openssl"}
-    : ${OPENSSL_NEXT:="$OPENSSL"}
-    : ${GNUTLS_CLI:="gnutls-cli"}
-    : ${GNUTLS_SERV:="gnutls-serv"}
-    : ${OUT_OF_SOURCE_DIR:=./mbedtls_out_of_source_build}
-    : ${ARMC6_BIN_DIR:=/usr/bin}
-    : ${ARM_NONE_EABI_GCC_PREFIX:=arm-none-eabi-}
-    : ${ARM_LINUX_GNUEABI_GCC_PREFIX:=arm-linux-gnueabi-}
-    : ${ARM_LINUX_GNUEABIHF_GCC_PREFIX:=arm-linux-gnueabihf-}
-    : ${AARCH64_LINUX_GNU_GCC_PREFIX:=aarch64-linux-gnu-}
-    : ${CLANG_LATEST:="clang-latest"}
-    : ${CLANG_EARLIEST:="clang-earliest"}
-    : ${GCC_LATEST:="gcc-latest"}
-    : ${GCC_EARLIEST:="gcc-earliest"}
-    # if MAKEFLAGS is not set add the -j option to speed up invocations of make
-    if [ -z "${MAKEFLAGS+set}" ]; then
-        export MAKEFLAGS="-j$(all_sh_nproc)"
-    fi
-    # if CC is not set, use clang by default (if present) to improve build times
-    if [ -z "${CC+set}" ] && (type clang > /dev/null 2>&1); then
-        export CC="clang"
-    fi
-
-    if [ -n "${OPENSSL_3+set}" ]; then
-        export OPENSSL_NEXT="$OPENSSL_3"
-    fi
-
-    # Include more verbose output for failing tests run by CMake or make
-    export CTEST_OUTPUT_ON_FAILURE=1
-
-    # CFLAGS and LDFLAGS for Asan builds that don't use CMake
-    # default to -O2, use -Ox _after_ this if you want another level
-    ASAN_CFLAGS='-O2 -Werror -fsanitize=address,undefined -fno-sanitize-recover=all'
-    # Normally, tests should use this compiler for ASAN testing
-    ASAN_CC=clang
-
-    # Platform tests have an allocation that returns null
-    export ASAN_OPTIONS="allocator_may_return_null=1"
-    export MSAN_OPTIONS="allocator_may_return_null=1"
-
-    # Gather the list of available components. These are the functions
-    # defined in this script whose name starts with "component_".
-    ALL_COMPONENTS=$(compgen -A function component_ | sed 's/component_//')
-
-    PSASIM_PATH='tests/psa-client-server/psasim/'
-
-    # Delay determining SUPPORTED_COMPONENTS until the command line options have a chance to override
-    # the commands set by the environment
-}
-
-setup_quiet_wrappers()
-{
-    # Pick up "quiet" wrappers for make and cmake, which don't output very much
-    # unless there is an error. This reduces logging overhead in the CI.
-    #
-    # Note that the cmake wrapper breaks unless we use an absolute path here.
-    if [[ -e ${PWD}/tests/scripts/quiet ]]; then
-        export PATH=${PWD}/tests/scripts/quiet:$PATH
-    fi
-}
-
-# Test whether the component $1 is included in the command line patterns.
-is_component_included()
-{
-    # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS
-    # only does word splitting.
-    set -f
-    for pattern in $COMMAND_LINE_COMPONENTS; do
-        set +f
-        case ${1#component_} in $pattern) return 0;; esac
-    done
-    set +f
-    return 1
-}
-
-usage()
-{
-    cat <<EOF
-Usage: $0 [OPTION]... [COMPONENT]...
-Run mbedtls release validation tests.
-By default, run all tests. With one or more COMPONENT, run only those.
-COMPONENT can be the name of a component or a shell wildcard pattern.
-
-Examples:
-  $0 "check_*"
-    Run all sanity checks.
-  $0 --no-armcc --except test_memsan
-    Run everything except builds that require armcc and MemSan.
-
-Special options:
-  -h|--help             Print this help and exit.
-  --list-all-components List all available test components and exit.
-  --list-components     List components supported on this platform and exit.
-
-General options:
-  -q|--quiet            Only output component names, and errors if any.
-  -f|--force            Force the tests to overwrite any modified files.
-  -k|--keep-going       Run all tests and report errors at the end.
-  -m|--memory           Additional optional memory tests.
-     --append-outcome   Append to the outcome file (if used).
-     --arm-none-eabi-gcc-prefix=<string>
-                        Prefix for a cross-compiler for arm-none-eabi
-                        (default: "${ARM_NONE_EABI_GCC_PREFIX}")
-     --arm-linux-gnueabi-gcc-prefix=<string>
-                        Prefix for a cross-compiler for arm-linux-gnueabi
-                        (default: "${ARM_LINUX_GNUEABI_GCC_PREFIX}")
-     --arm-linux-gnueabihf-gcc-prefix=<string>
-                        Prefix for a cross-compiler for arm-linux-gnueabihf
-                        (default: "${ARM_LINUX_GNUEABIHF_GCC_PREFIX}")
-     --aarch64-linux-gnu-gcc-prefix=<string>
-                        Prefix for a cross-compiler for aarch64-linux-gnu
-                        (default: "${AARCH64_LINUX_GNU_GCC_PREFIX}")
-     --armcc            Run ARM Compiler builds (on by default).
-     --restore          First clean up the build tree, restoring backed up
-                        files. Do not run any components unless they are
-                        explicitly specified.
-     --error-test       Error test mode: run a failing function in addition
-                        to any specified component. May be repeated.
-     --except           Exclude the COMPONENTs listed on the command line,
-                        instead of running only those.
-     --no-append-outcome    Write a new outcome file and analyze it (default).
-     --no-armcc         Skip ARM Compiler builds.
-     --no-force         Refuse to overwrite modified files (default).
-     --no-keep-going    Stop at the first error (default).
-     --no-memory        No additional memory tests (default).
-     --no-quiet         Print full output from components.
-     --out-of-source-dir=<path>  Directory used for CMake out-of-source build tests.
-     --outcome-file=<path>  File where test outcomes are written (not done if
-                            empty; default: \$MBEDTLS_TEST_OUTCOME_FILE).
-     --random-seed      Use a random seed value for randomized tests (default).
-  -r|--release-test     Run this script in release mode. This fixes the seed value to ${RELEASE_SEED}.
-  -s|--seed             Integer seed value to use for this test run.
-
-Tool path options:
-     --armc6-bin-dir=<ARMC6_bin_dir_path>       ARM Compiler 6 bin directory.
-     --clang-earliest=<Clang_earliest_path>     Earliest version of clang available
-     --clang-latest=<Clang_latest_path>         Latest version of clang available
-     --gcc-earliest=<GCC_earliest_path>         Earliest version of GCC available
-     --gcc-latest=<GCC_latest_path>             Latest version of GCC available
-     --gnutls-cli=<GnuTLS_cli_path>             GnuTLS client executable to use for most tests.
-     --gnutls-serv=<GnuTLS_serv_path>           GnuTLS server executable to use for most tests.
-     --openssl=<OpenSSL_path>                   OpenSSL executable to use for most tests.
-     --openssl-next=<OpenSSL_path>              OpenSSL executable to use for recent things like ARIA
-EOF
-}
-
-# Cleanup before/after running a component.
-# Remove built files as well as the cmake cache/config.
-# Does not remove generated source files.
-cleanup()
-{
-    if in_mbedtls_repo; then
-        command make clean
-    fi
-
-    # Remove CMake artefacts
-    find . -name .git -prune -o \
-           -iname CMakeFiles -exec rm -rf {} \+ -o \
-           \( -iname cmake_install.cmake -o \
-              -iname CTestTestfile.cmake -o \
-              -iname CMakeCache.txt -o \
-              -path './cmake/*.cmake' \) -exec rm -f {} \+
-    # Remove Makefiles generated by in-tree CMake builds
-    # (Not all files will exist in all branches, but that's OK.)
-    rm -f 3rdparty/Makefile 3rdparty/*/Makefile
-    rm -f pkgconfig/Makefile framework/Makefile
-    rm -f include/Makefile programs/!(fuzz)/Makefile
-    rm -f tf-psa-crypto/Makefile tf-psa-crypto/include/Makefile
-    rm -f tf-psa-crypto/core/Makefile tf-psa-crypto/drivers/Makefile
-    rm -f tf-psa-crypto/tests/Makefile
-    rm -f tf-psa-crypto/drivers/everest/Makefile
-    rm -f tf-psa-crypto/drivers/p256-m/Makefile
-    rm -f tf-psa-crypto/drivers/builtin/Makefile
-    rm -f tf-psa-crypto/drivers/builtin/src/Makefile
-
-    # Remove any artifacts from the component_test_cmake_as_subdirectory test.
-    rm -rf programs/test/cmake_subproject/build
-    rm -f programs/test/cmake_subproject/Makefile
-    rm -f programs/test/cmake_subproject/cmake_subproject
-
-    # Remove any artifacts from the component_test_cmake_as_package test.
-    rm -rf programs/test/cmake_package/build
-    rm -f programs/test/cmake_package/Makefile
-    rm -f programs/test/cmake_package/cmake_package
-
-    # Remove any artifacts from the component_test_cmake_as_installed_package test.
-    rm -rf programs/test/cmake_package_install/build
-    rm -f programs/test/cmake_package_install/Makefile
-    rm -f programs/test/cmake_package_install/cmake_package_install
-
-    # Restore files that may have been clobbered by the job
-    restore_backed_up_files
-}
-
-# Restore files that may have been clobbered
-restore_backed_up_files () {
-    for x in $files_to_back_up; do
-        if [[ -e "$x$backup_suffix" ]]; then
-            cp -p "$x$backup_suffix" "$x"
-        fi
-    done
-}
-
-# Final cleanup when this script exits (except when exiting on a failure
-# in non-keep-going mode).
-final_cleanup () {
-    cleanup
-
-    for x in $files_to_back_up; do
-        rm -f "$x$backup_suffix"
-    done
-}
-
-# Executed on exit. May be redefined depending on command line options.
-final_report () {
-    :
-}
-
-fatal_signal () {
-    final_cleanup
-    final_report $1
-    trap - $1
-    kill -$1 $$
-}
-
-pre_set_signal_handlers () {
-    trap 'fatal_signal HUP' HUP
-    trap 'fatal_signal INT' INT
-    trap 'fatal_signal TERM' TERM
-}
-
-# Number of processors on this machine. Used as the default setting
-# for parallel make.
-all_sh_nproc ()
-{
-    {
-        nproc || # Linux
-        sysctl -n hw.ncpuonline || # NetBSD, OpenBSD
-        sysctl -n hw.ncpu || # FreeBSD
-        echo 1
-    } 2>/dev/null
-}
-
-msg()
-{
-    if [ -n "${current_component:-}" ]; then
-        current_section="${current_component#component_}: $1"
-    else
-        current_section="$1"
-    fi
-
-    if [ $QUIET -eq 1 ]; then
-        return
-    fi
-
-    echo ""
-    echo "******************************************************************"
-    echo "* $current_section "
-    printf "* "; date
-    echo "******************************************************************"
-}
-
-err_msg()
-{
-    echo "$1" >&2
-}
-
-check_tools()
-{
-    for tool in "$@"; do
-        if ! `type "$tool" >/dev/null 2>&1`; then
-            err_msg "$tool not found!"
-            exit 1
-        fi
-    done
-}
-
-pre_parse_command_line () {
-    COMMAND_LINE_COMPONENTS=
-    all_except=0
-    error_test=0
-    list_components=0
-    restore_first=0
-    no_armcc=
-
-    # Note that legacy options are ignored instead of being omitted from this
-    # list of options, so invocations that worked with previous version of
-    # all.sh will still run and work properly.
-    while [ $# -gt 0 ]; do
-        case "$1" in
-            --append-outcome) append_outcome=1;;
-            --arm-none-eabi-gcc-prefix) shift; ARM_NONE_EABI_GCC_PREFIX="$1";;
-            --arm-linux-gnueabi-gcc-prefix) shift; ARM_LINUX_GNUEABI_GCC_PREFIX="$1";;
-            --arm-linux-gnueabihf-gcc-prefix) shift; ARM_LINUX_GNUEABIHF_GCC_PREFIX="$1";;
-            --aarch64-linux-gnu-gcc-prefix) shift; AARCH64_LINUX_GNU_GCC_PREFIX="$1";;
-            --armcc) no_armcc=;;
-            --armc6-bin-dir) shift; ARMC6_BIN_DIR="$1";;
-            --clang-earliest) shift; CLANG_EARLIEST="$1";;
-            --clang-latest) shift; CLANG_LATEST="$1";;
-            --error-test) error_test=$((error_test + 1));;
-            --except) all_except=1;;
-            --force|-f) FORCE=1;;
-            --gcc-earliest) shift; GCC_EARLIEST="$1";;
-            --gcc-latest) shift; GCC_LATEST="$1";;
-            --gnutls-cli) shift; GNUTLS_CLI="$1";;
-            --gnutls-legacy-cli) shift;; # ignored for backward compatibility
-            --gnutls-legacy-serv) shift;; # ignored for backward compatibility
-            --gnutls-serv) shift; GNUTLS_SERV="$1";;
-            --help|-h) usage; exit;;
-            --keep-going|-k) KEEP_GOING=1;;
-            --list-all-components) printf '%s\n' $ALL_COMPONENTS; exit;;
-            --list-components) list_components=1;;
-            --memory|-m) MEMORY=1;;
-            --no-append-outcome) append_outcome=0;;
-            --no-armcc) no_armcc=1;;
-            --no-force) FORCE=0;;
-            --no-keep-going) KEEP_GOING=0;;
-            --no-memory) MEMORY=0;;
-            --no-quiet) QUIET=0;;
-            --openssl) shift; OPENSSL="$1";;
-            --openssl-next) shift; OPENSSL_NEXT="$1";;
-            --outcome-file) shift; MBEDTLS_TEST_OUTCOME_FILE="$1";;
-            --out-of-source-dir) shift; OUT_OF_SOURCE_DIR="$1";;
-            --quiet|-q) QUIET=1;;
-            --random-seed) unset SEED;;
-            --release-test|-r) SEED=$RELEASE_SEED;;
-            --restore) restore_first=1;;
-            --seed|-s) shift; SEED="$1";;
-            -*)
-                echo >&2 "Unknown option: $1"
-                echo >&2 "Run $0 --help for usage."
-                exit 120
-                ;;
-            *) COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS $1";;
-        esac
-        shift
-    done
-
-    # Exclude components that are not supported on this platform.
-    SUPPORTED_COMPONENTS=
-    for component in $ALL_COMPONENTS; do
-        case $(type "support_$component" 2>&1) in
-            *' function'*)
-                if ! support_$component; then continue; fi;;
-        esac
-        SUPPORTED_COMPONENTS="$SUPPORTED_COMPONENTS $component"
-    done
-
-    if [ $list_components -eq 1 ]; then
-        printf '%s\n' $SUPPORTED_COMPONENTS
-        exit
-    fi
-
-    # With no list of components, run everything.
-    if [ -z "$COMMAND_LINE_COMPONENTS" ] && [ $restore_first -eq 0 ]; then
-        all_except=1
-    fi
-
-    # --no-armcc is a legacy option. The modern way is --except '*_armcc*'.
-    # Ignore it if components are listed explicitly on the command line.
-    if [ -n "$no_armcc" ] && [ $all_except -eq 1 ]; then
-        COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS *_armcc*"
-    fi
-
-    # Error out if an explicitly requested component doesn't exist.
-    if [ $all_except -eq 0 ]; then
-        unsupported=0
-        # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS
-        # only does word splitting.
-        set -f
-        for component in $COMMAND_LINE_COMPONENTS; do
-            set +f
-            # If the requested name includes a wildcard character, don't
-            # check it. Accept wildcard patterns that don't match anything.
-            case $component in
-                *[*?\[]*) continue;;
-            esac
-            case " $SUPPORTED_COMPONENTS " in
-                *" $component "*) :;;
-                *)
-                    echo >&2 "Component $component was explicitly requested, but is not known or not supported."
-                    unsupported=$((unsupported + 1));;
-            esac
-        done
-        set +f
-        if [ $unsupported -ne 0 ]; then
-            exit 2
-        fi
-    fi
-
-    # Build the list of components to run.
-    RUN_COMPONENTS=
-    for component in $SUPPORTED_COMPONENTS; do
-        if is_component_included "$component"; [ $? -eq $all_except ]; then
-            RUN_COMPONENTS="$RUN_COMPONENTS $component"
-        fi
-    done
-
-    unset all_except
-    unset no_armcc
-}
-
-pre_check_git () {
-    if [ $FORCE -eq 1 ]; then
-        rm -rf "$OUT_OF_SOURCE_DIR"
-        git checkout-index -f -q $config_files
-        cleanup
-    else
-
-        if [ -d "$OUT_OF_SOURCE_DIR" ]; then
-            echo "Warning - there is an existing directory at '$OUT_OF_SOURCE_DIR'" >&2
-            echo "You can either delete this directory manually, or force the test by rerunning"
-            echo "the script as: $0 --force --out-of-source-dir $OUT_OF_SOURCE_DIR"
-            exit 1
-        fi
-
-        for config in $config_files; do
-            if ! git diff --quiet "$config"; then
-                err_msg "Warning - the configuration file '$config' has been edited. "
-                echo "You can either delete or preserve your work, or force the test by rerunning the"
-                echo "script as: $0 --force"
-                exit 1
-            fi
-        done
-    fi
-}
-
-pre_restore_files () {
-    # If the makefiles have been generated by a framework such as cmake,
-    # restore them from git. If the makefiles look like modifications from
-    # the ones checked into git, take care not to modify them. Whatever
-    # this function leaves behind is what the script will restore before
-    # each component.
-    case "$(head -n1 Makefile)" in
-        *[Gg]enerated*)
-            git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
-            git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
-            ;;
-    esac
-}
-
-pre_back_up () {
-    for x in $files_to_back_up; do
-        cp -p "$x" "$x$backup_suffix"
-    done
-}
-
-pre_setup_keep_going () {
-    failure_count=0 # Number of failed components
-    last_failure_status=0 # Last failure status in this component
-
-    # See err_trap
-    previous_failure_status=0
-    previous_failed_command=
-    previous_failure_funcall_depth=0
-    unset report_failed_command
-
-    start_red=
-    end_color=
-    if [ -t 1 ]; then
-        case "${TERM:-}" in
-            *color*|cygwin|linux|rxvt*|screen|[Eex]term*)
-                start_red=$(printf '\033[31m')
-                end_color=$(printf '\033[0m')
-                ;;
-        esac
-    fi
-
-    # Keep a summary of failures in a file. We'll print it out at the end.
-    failure_summary_file=$PWD/all-sh-failures-$$.log
-    : >"$failure_summary_file"
-
-    # Whether it makes sense to keep a component going after the specified
-    # command fails (test command) or not (configure or build).
-    # This function normally receives the failing simple command
-    # ($BASH_COMMAND) as an argument, but if $report_failed_command is set,
-    # this is passed instead.
-    # This doesn't have to be 100% accurate: all failures are recorded anyway.
-    # False positives result in running things that can't be expected to
-    # work. False negatives result in things not running after something else
-    # failed even though they might have given useful feedback.
-    can_keep_going_after_failure () {
-        case "$1" in
-            "msg "*) false;;
-            "cd "*) false;;
-            "diff "*) true;;
-            *make*[\ /]tests*) false;; # make tests, make CFLAGS=-I../tests, ...
-            *test*) true;; # make test, tests/stuff, env V=v tests/stuff, ...
-            *make*check*) true;;
-            "grep "*) true;;
-            "[ "*) true;;
-            "! "*) true;;
-            *) false;;
-        esac
-    }
-
-    # This function runs if there is any error in a component.
-    # It must either exit with a nonzero status, or set
-    # last_failure_status to a nonzero value.
-    err_trap () {
-        # Save $? (status of the failing command). This must be the very
-        # first thing, before $? is overridden.
-        last_failure_status=$?
-        failed_command=${report_failed_command-$BASH_COMMAND}
-
-        if [[ $last_failure_status -eq $previous_failure_status &&
-              "$failed_command" == "$previous_failed_command" &&
-              ${#FUNCNAME[@]} == $((previous_failure_funcall_depth - 1)) ]]
-        then
-            # The same command failed twice in a row, but this time one level
-            # less deep in the function call stack. This happens when the last
-            # command of a function returns a nonzero status, and the function
-            # returns that same status. Ignore the second failure.
-            previous_failure_funcall_depth=${#FUNCNAME[@]}
-            return
-        fi
-        previous_failure_status=$last_failure_status
-        previous_failed_command=$failed_command
-        previous_failure_funcall_depth=${#FUNCNAME[@]}
-
-        text="$current_section: $failed_command -> $last_failure_status"
-        echo "${start_red}^^^^$text^^^^${end_color}" >&2
-        echo "$text" >>"$failure_summary_file"
-
-        # If the command is fatal (configure or build command), stop this
-        # component. Otherwise (test command) keep the component running
-        # (run more tests from the same build).
-        if ! can_keep_going_after_failure "$failed_command"; then
-            exit $last_failure_status
-        fi
-    }
-
-    final_report () {
-        if [ $failure_count -gt 0 ]; then
-            echo
-            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
-            echo "${start_red}FAILED: $failure_count components${end_color}"
-            cat "$failure_summary_file"
-            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
-        elif [ -z "${1-}" ]; then
-            echo "SUCCESS :)"
-        fi
-        if [ -n "${1-}" ]; then
-            echo "Killed by SIG$1."
-        fi
-        rm -f "$failure_summary_file"
-        if [ $failure_count -gt 0 ]; then
-            exit 1
-        fi
-    }
-}
-
-# '! true' does not trigger the ERR trap. Arrange to trigger it, with
-# a reasonably informative error message (not just "$@").
-not () {
-    if "$@"; then
-        report_failed_command="! $*"
-        false
-        unset report_failed_command
-    fi
-}
-
-pre_prepare_outcome_file () {
-    case "$MBEDTLS_TEST_OUTCOME_FILE" in
-      [!/]*) MBEDTLS_TEST_OUTCOME_FILE="$PWD/$MBEDTLS_TEST_OUTCOME_FILE";;
-    esac
-    if [ -n "$MBEDTLS_TEST_OUTCOME_FILE" ] && [ "$append_outcome" -eq 0 ]; then
-        rm -f "$MBEDTLS_TEST_OUTCOME_FILE"
-    fi
-}
-
-pre_print_configuration () {
-    if [ $QUIET -eq 1 ]; then
-        return
-    fi
-
-    msg "info: $0 configuration"
-    echo "MEMORY: $MEMORY"
-    echo "FORCE: $FORCE"
-    echo "MBEDTLS_TEST_OUTCOME_FILE: ${MBEDTLS_TEST_OUTCOME_FILE:-(none)}"
-    echo "SEED: ${SEED-"UNSET"}"
-    echo
-    echo "OPENSSL: $OPENSSL"
-    echo "OPENSSL_NEXT: $OPENSSL_NEXT"
-    echo "GNUTLS_CLI: $GNUTLS_CLI"
-    echo "GNUTLS_SERV: $GNUTLS_SERV"
-    echo "ARMC6_BIN_DIR: $ARMC6_BIN_DIR"
-}
-
-# Make sure the tools we need are available.
-pre_check_tools () {
-    # Build the list of variables to pass to output_env.sh.
-    set env
-
-    case " $RUN_COMPONENTS " in
-        # Require OpenSSL and GnuTLS if running any tests (as opposed to
-        # only doing builds). Not all tests run OpenSSL and GnuTLS, but this
-        # is a good enough approximation in practice.
-        *" test_"* | *" release_test_"*)
-            # To avoid setting OpenSSL and GnuTLS for each call to compat.sh
-            # and ssl-opt.sh, we just export the variables they require.
-            export OPENSSL="$OPENSSL"
-            export GNUTLS_CLI="$GNUTLS_CLI"
-            export GNUTLS_SERV="$GNUTLS_SERV"
-            # Avoid passing --seed flag in every call to ssl-opt.sh
-            if [ -n "${SEED-}" ]; then
-                export SEED
-            fi
-            set "$@" OPENSSL="$OPENSSL"
-            set "$@" GNUTLS_CLI="$GNUTLS_CLI" GNUTLS_SERV="$GNUTLS_SERV"
-            check_tools "$OPENSSL" "$OPENSSL_NEXT" \
-                        "$GNUTLS_CLI" "$GNUTLS_SERV"
-            ;;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_doxygen[_\ ]*) check_tools "doxygen" "dot";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_arm_none_eabi_gcc[_\ ]*) check_tools "${ARM_NONE_EABI_GCC_PREFIX}gcc";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_mingw[_\ ]*) check_tools "i686-w64-mingw32-gcc";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *" test_zeroize "*) check_tools "gdb";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_armcc*)
-            ARMC6_CC="$ARMC6_BIN_DIR/armclang"
-            ARMC6_AR="$ARMC6_BIN_DIR/armar"
-            ARMC6_FROMELF="$ARMC6_BIN_DIR/fromelf"
-            check_tools "$ARMC6_CC" "$ARMC6_AR" "$ARMC6_FROMELF";;
-    esac
-
-    # past this point, no call to check_tool, only printing output
-    if [ $QUIET -eq 1 ]; then
-        return
-    fi
-
-    msg "info: output_env.sh"
-    case $RUN_COMPONENTS in
-        *_armcc*)
-            set "$@" ARMC6_CC="$ARMC6_CC" RUN_ARMCC=1;;
-        *) set "$@" RUN_ARMCC=0;;
-    esac
-    # Use a path relative to the currently-sourced file.
-    "$@" "${BASH_SOURCE%/*}"/../../scripts/output_env.sh
-}
-
-pre_generate_files() {
-    # since make doesn't have proper dependencies, remove any possibly outdate
-    # file that might be around before generating fresh ones
-    make neat
-    if [ $QUIET -eq 1 ]; then
-        make generated_files >/dev/null
-    else
-        make generated_files
-    fi
-}
-
-pre_load_helpers () {
-    # Use a path relative to the currently-sourced file.
-    test_script_dir="${BASH_SOURCE%/*}"
-    source "$test_script_dir"/all-helpers.sh
-}
-
-################################################################
-#### Termination
-################################################################
-
-post_report () {
-    msg "Done, cleaning up"
-    final_cleanup
-
-    final_report
-}
-
-################################################################
-#### Run all the things
-################################################################
-
-# Function invoked by --error-test to test error reporting.
-pseudo_component_error_test () {
-    msg "Testing error reporting $error_test_i"
-    if [ $KEEP_GOING -ne 0 ]; then
-        echo "Expect three failing commands."
-    fi
-    # If the component doesn't run in a subshell, changing error_test_i to an
-    # invalid integer will cause an error in the loop that runs this function.
-    error_test_i=this_should_not_be_used_since_the_component_runs_in_a_subshell
-    # Expected error: 'grep non_existent /dev/null -> 1'
-    grep non_existent /dev/null
-    # Expected error: '! grep -q . tests/scripts/all.sh -> 1'
-    not grep -q . "$0"
-    # Expected error: 'make unknown_target -> 2'
-    make unknown_target
-    false "this should not be executed"
-}
-
-# Run one component and clean up afterwards.
-run_component () {
-    current_component="$1"
-    export MBEDTLS_TEST_CONFIGURATION="$current_component"
-
-    # Unconditionally create a seedfile that's sufficiently long.
-    # Do this before each component, because a previous component may
-    # have messed it up or shortened it.
-    local dd_cmd
-    dd_cmd=(dd if=/dev/urandom of=./tests/seedfile bs=64 count=1)
-    case $OSTYPE in
-        linux*|freebsd*|openbsd*) dd_cmd+=(status=none)
-    esac
-    "${dd_cmd[@]}"
-
-    if [ -d tf-psa-crypto ]; then
-        dd_cmd=(dd if=/dev/urandom of=./tf-psa-crypto/tests/seedfile bs=64 count=1)
-        case $OSTYPE in
-            linux*|freebsd*|openbsd*) dd_cmd+=(status=none)
-        esac
-        "${dd_cmd[@]}"
-    fi
-
-    # Run the component in a subshell, with error trapping and output
-    # redirection set up based on the relevant options.
-    if [ $KEEP_GOING -eq 1 ]; then
-        # We want to keep running if the subshell fails, so 'set -e' must
-        # be off when the subshell runs.
-        set +e
-    fi
-    (
-        if [ $QUIET -eq 1 ]; then
-            # msg() will be silenced, so just print the component name here.
-            echo "${current_component#component_}"
-            exec >/dev/null
-        fi
-        if [ $KEEP_GOING -eq 1 ]; then
-            # Keep "set -e" off, and run an ERR trap instead to record failures.
-            set -E
-            trap err_trap ERR
-        fi
-        # The next line is what runs the component
-        "$@"
-        if [ $KEEP_GOING -eq 1 ]; then
-            trap - ERR
-            exit $last_failure_status
-        fi
-    )
-    component_status=$?
-    if [ $KEEP_GOING -eq 1 ]; then
-        set -e
-        if [ $component_status -ne 0 ]; then
-            failure_count=$((failure_count + 1))
-        fi
-    fi
-
-    # Restore the build tree to a clean state.
-    cleanup
-    unset current_component
-}
-
-################################################################
-#### Main
-################################################################
-
-main () {
-    # Preliminary setup
-    pre_set_shell_options
-    pre_set_signal_handlers
-    pre_check_environment
-    pre_load_helpers
-    pre_load_components
-    pre_initialize_variables
-    pre_parse_command_line "$@"
-
-    setup_quiet_wrappers
-    pre_check_git
-    pre_restore_files
-    pre_back_up
-
-    build_status=0
-    if [ $KEEP_GOING -eq 1 ]; then
-        pre_setup_keep_going
-    fi
-    pre_prepare_outcome_file
-    pre_print_configuration
-    pre_check_tools
-    cleanup
-    if in_mbedtls_repo; then
-        pre_generate_files
-    fi
-
-    # Run the requested tests.
-    for ((error_test_i=1; error_test_i <= error_test; error_test_i++)); do
-        run_component pseudo_component_error_test
-    done
-    unset error_test_i
-    for component in $RUN_COMPONENTS; do
-        run_component "component_$component"
-    done
-
-    # We're done.
-    post_report
-}
diff --git a/tests/scripts/all-helpers.sh b/tests/scripts/all-helpers.sh
deleted file mode 100644
index cdb3f4e..0000000
--- a/tests/scripts/all-helpers.sh
+++ /dev/null
@@ -1,327 +0,0 @@
-# all-helpers.sh
-#
-# Copyright The Mbed TLS Contributors
-# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
-
-# This file contains helpers for test components that are executed by all.sh.
-# See "Files structure" in all-core.sh for other files used by all.sh.
-#
-# This file is the right place for helpers:
-# - that are used by more than one component living in more than one file;
-# - or (inclusive) that we want to share accross repos or branches.
-#
-# Helpers that are used in a single component file that is
-# repo&branch-specific can be defined in the file where they are used.
-
-################################################################
-#### Helpers for components using libtestdriver1
-################################################################
-
-# How to use libtestdriver1
-# -------------------------
-#
-# 1. Define the list algorithms and key types to accelerate,
-#    designated the same way as PSA_WANT_ macros but without PSA_WANT_.
-#    Examples:
-#      - loc_accel_list="ALG_JPAKE"
-#      - loc_accel_list="ALG_FFDH KEY_TYPE_DH_KEY_PAIR KEY_TYPE_DH_PUBLIC_KEY"
-# 2. Make configurations changes for the driver and/or main libraries.
-#    2a. Call helper_libtestdriver1_adjust_config <base>, where the argument
-#        can be either "default" to start with the default config, or a name
-#        supported by scripts/config.py (for example, "full"). This selects
-#        the base to use, and makes common adjustments.
-#    2b. If desired, adjust the PSA_WANT symbols in psa/crypto_config.h.
-#        These changes affect both the driver and the main libraries.
-#        (Note: they need to have the same set of PSA_WANT symbols, as that
-#        determines the ABI between them.)
-#    2c. Adjust MBEDTLS_ symbols in mbedtls_config.h. This only affects the
-#        main libraries. Typically, you want to disable the module(s) that are
-#        being accelerated. You may need to also disable modules that depend
-#        on them or options that are not supported with drivers.
-#    2d. On top of psa/crypto_config.h, the driver library uses its own config
-#        file: tests/include/test/drivers/config_test_driver.h. You usually
-#        don't need to edit it: using loc_extra_list (see below) is preferred.
-#        However, when there's no PSA symbol for what you want to enable,
-#        calling scripts/config.py on this file remains the only option.
-# 3. Build the driver library, then the main libraries, test, and programs.
-#    3a. Call helper_libtestdriver1_make_drivers "$loc_accel_list". You may
-#        need to enable more algorithms here, typically hash algorithms when
-#        accelerating some signature algorithms (ECDSA, RSAv2). This is done
-#        by passing a 2nd argument listing the extra algorithms.
-#        Example:
-#          loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512"
-#          helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
-#    3b. Call helper_libtestdriver1_make_main "$loc_accel_list". Any
-#        additional arguments will be passed to make: this can be useful if
-#        you don't want to build everything when iterating during development.
-#        Example:
-#          helper_libtestdriver1_make_main "$loc_accel_list" -C tests test_suite_foo
-# 4. Run the tests you want.
-
-# Adjust the configuration - for both libtestdriver1 and main library,
-# as they should have the same PSA_WANT macros.
-helper_libtestdriver1_adjust_config() {
-    base_config=$1
-    # Select the base configuration
-    if [ "$base_config" != "default" ]; then
-        scripts/config.py "$base_config"
-    fi
-
-    # Enable PSA-based config (necessary to use drivers)
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
-
-    # Dynamic secure element support is a deprecated feature and needs to be disabled here.
-    # This is done to have the same form of psa_key_attributes_s for libdriver and library.
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-
-    # If threading is enabled on the normal build, then we need to enable it in the drivers as well,
-    # otherwise we will end up running multithreaded tests without mutexes to protect them.
-    if scripts/config.py get MBEDTLS_THREADING_C; then
-        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_THREADING_C
-    fi
-
-    if scripts/config.py get MBEDTLS_THREADING_PTHREAD; then
-        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_THREADING_PTHREAD
-    fi
-}
-
-# Build the drivers library libtestdriver1.a (with ASan).
-#
-# Parameters:
-# 1. a space-separated list of things to accelerate;
-# 2. optional: a space-separate list of things to also support.
-# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
-helper_libtestdriver1_make_drivers() {
-    loc_accel_flags=$( echo "$1 ${2-}" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
-    make CC=$ASAN_CC -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# Build the main libraries, programs and tests,
-# linking to the drivers library (with ASan).
-#
-# Parameters:
-# 1. a space-separated list of things to accelerate;
-# *. remaining arguments if any are passed directly to make
-#    (examples: lib, -C tests test_suite_xxx, etc.)
-# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
-helper_libtestdriver1_make_main() {
-    loc_accel_list=$1
-    shift
-
-    # we need flags both with and without the LIBTESTDRIVER1_ prefix
-    loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
-    loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" "$@"
-}
-
-################################################################
-#### Helpers for components using psasim
-################################################################
-
-# Set some default values $CONFIG_H in order to build server or client sides
-# in PSASIM. There is only 1 mandatory parameter:
-# - $1: target which can be "client" or "server"
-helper_psasim_config() {
-    TARGET=$1
-
-    if [ "$TARGET" == "client" ]; then
-        scripts/config.py full
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
-        # Dynamic secure element support is a deprecated feature and it is not
-        # available when CRYPTO_C and PSA_CRYPTO_STORAGE_C are disabled.
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-        # Disable potentially problematic features
-        scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
-        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
-        scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
-    else
-        scripts/config.py crypto_full
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
-        # We need to match the client with MBEDTLS_PSA_CRYPTO_SE_C
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-        # Also ensure MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER not set (to match client)
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
-    fi
-}
-
-# This is a helper function to be used in psasim builds. It is meant to clean
-# up the library's workspace after the server build and before the client
-# build. Built libraries (mbedcrypto, mbedx509 and mbedtls) are supposed to be
-# already copied to psasim folder at this point.
-helper_psasim_cleanup_before_client() {
-    # Clean up library files
-    make -C library clean
-
-    # Restore files that were backup before building library files. This
-    # includes $CONFIG_H and $CRYPTO_CONFIG_H.
-    restore_backed_up_files
-}
-
-# Helper to build the libraries for client/server in PSASIM. If the server is
-# being built, then it builds also the final executable.
-# There is only 1 mandatory parameter:
-# - $1: target which can be "client" or "server"
-helper_psasim_build() {
-    TARGET=$1
-    shift
-    TARGET_LIB=${TARGET}_libs
-
-    make -C $PSASIM_PATH CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" $TARGET_LIB "$@"
-
-    # Build also the server application after its libraries have been built.
-    if [ "$TARGET" == "server" ]; then
-        make -C $PSASIM_PATH CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" test/psa_server
-    fi
-}
-
-################################################################
-#### Configuration helpers
-################################################################
-
-# When called with no parameter this function disables all builtin curves.
-# The function optionally accepts 1 parameter: a space-separated list of the
-# curves that should be kept enabled.
-helper_disable_builtin_curves() {
-    allowed_list="${1:-}"
-    scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED"
-
-    for curve in $allowed_list; do
-        scripts/config.py set $curve
-    done
-}
-
-# Helper returning the list of supported elliptic curves from CRYPTO_CONFIG_H,
-# without the "PSA_WANT_" prefix. This becomes handy for accelerating curves
-# in the following helpers.
-helper_get_psa_curve_list () {
-    loc_list=""
-    for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
-        loc_list="$loc_list $item"
-    done
-
-    echo "$loc_list"
-}
-
-# Helper returning the list of supported DH groups from CRYPTO_CONFIG_H,
-# without the "PSA_WANT_" prefix. This becomes handy for accelerating DH groups
-# in the following helpers.
-helper_get_psa_dh_group_list () {
-    loc_list=""
-    for item in $(sed -n 's/^#define PSA_WANT_\(DH_RFC7919_[0-9]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
-        loc_list="$loc_list $item"
-    done
-
-    echo "$loc_list"
-}
-
-# Get the list of uncommented PSA_WANT_KEY_TYPE_xxx_ from CRYPTO_CONFIG_H. This
-# is useful to easily get a list of key type symbols to accelerate.
-# The function accepts a single argument which is the key type: ECC, DH, RSA.
-helper_get_psa_key_type_list() {
-    key_type="$1"
-    loc_list=""
-    for item in $(sed -n "s/^#define PSA_WANT_\(KEY_TYPE_${key_type}_[0-9A-Z_a-z]*\).*/\1/p" <"$CRYPTO_CONFIG_H"); do
-        # Skip DERIVE for elliptic keys since there is no driver dispatch for
-        # it so it cannot be accelerated.
-        if [ "$item" != "KEY_TYPE_ECC_KEY_PAIR_DERIVE" ]; then
-            loc_list="$loc_list $item"
-        fi
-    done
-
-    echo "$loc_list"
-}
-
-################################################################
-#### Misc. helpers for components
-################################################################
-
-helper_armc6_build_test()
-{
-    FLAGS="$1"
-
-    msg "build: ARM Compiler 6 ($FLAGS)"
-    make clean
-    ARM_TOOL_VARIANT="ult" CC="$ARMC6_CC" AR="$ARMC6_AR" CFLAGS="$FLAGS" \
-                    WARNING_CFLAGS='-Werror -xc -std=c99' make lib
-
-    msg "size: ARM Compiler 6 ($FLAGS)"
-    "$ARMC6_FROMELF" -z library/*.o
-    if [ -n "${PSA_CORE_PATH}" ]; then
-        "$ARMC6_FROMELF" -z ${PSA_CORE_PATH}/*.o
-    fi
-    if [ -n "${BUILTIN_SRC_PATH}" ]; then
-        "$ARMC6_FROMELF" -z ${BUILTIN_SRC_PATH}/*.o
-    fi
-}
-
-clang_version() {
-    if command -v clang > /dev/null ; then
-        clang --version|grep version|sed -E 's#.*version ([0-9]+).*#\1#'
-    else
-        echo 0  # report version 0 for "no clang"
-    fi
-}
-
-gcc_version() {
-    gcc="$1"
-    if command -v "$gcc" > /dev/null ; then
-        "$gcc" --version | sed -En '1s/^[^ ]* \([^)]*\) ([0-9]+).*/\1/p'
-    else
-        echo 0  # report version 0 for "no gcc"
-    fi
-}
-
-can_run_cc_output() {
-    cc="$1"
-    result=false
-    if type "$cc" >/dev/null 2>&1; then
-        testbin=$(mktemp)
-        if echo 'int main(void){return 0;}' | "$cc" -o "$testbin" -x c -; then
-            if "$testbin" 2>/dev/null; then
-                result=true
-            fi
-        fi
-        rm -f "$testbin"
-    fi
-    $result
-}
-
-can_run_arm_linux_gnueabi=
-can_run_arm_linux_gnueabi () {
-    if [ -z "$can_run_arm_linux_gnueabi" ]; then
-        if can_run_cc_output "${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc"; then
-            can_run_arm_linux_gnueabi=true
-        else
-            can_run_arm_linux_gnueabi=false
-        fi
-    fi
-    $can_run_arm_linux_gnueabi
-}
-
-can_run_arm_linux_gnueabihf=
-can_run_arm_linux_gnueabihf () {
-    if [ -z "$can_run_arm_linux_gnueabihf" ]; then
-        if can_run_cc_output "${ARM_LINUX_GNUEABIHF_GCC_PREFIX}gcc"; then
-            can_run_arm_linux_gnueabihf=true
-        else
-            can_run_arm_linux_gnueabihf=false
-        fi
-    fi
-    $can_run_arm_linux_gnueabihf
-}
-
-can_run_aarch64_linux_gnu=
-can_run_aarch64_linux_gnu () {
-    if [ -z "$can_run_aarch64_linux_gnu" ]; then
-        if can_run_cc_output "${AARCH64_LINUX_GNU_GCC_PREFIX}gcc"; then
-            can_run_aarch64_linux_gnu=true
-        else
-            can_run_aarch64_linux_gnu=false
-        fi
-    fi
-    $can_run_aarch64_linux_gnu
-}