diff --git a/tests/scripts/components-configuration-tls.sh b/tests/scripts/components-configuration-tls.sh
index 0775ac1..33f627e 100644
--- a/tests/scripts/components-configuration-tls.sh
+++ b/tests/scripts/components-configuration-tls.sh
@@ -8,3 +8,534 @@
 ################################################################
 #### Configuration Testing - TLS
 ################################################################
+
+component_test_no_renegotiation () {
+    msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min
+    scripts/config.py unset MBEDTLS_SSL_RENEGOTIATION
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s
+    make test
+
+    msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min
+    tests/ssl-opt.sh
+}
+
+component_test_tls1_2_default_stream_cipher_only () {
+    msg "build: default with only stream cipher"
+
+    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    #Disable TLS 1.3 (as no AEAD)
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+    # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
+    # Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+    scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER
+    # Modules that depend on AEAD
+    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+    scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+    make
+
+    msg "test: default with only stream cipher"
+    make test
+
+    # Not running ssl-opt.sh because most tests require a non-NULL ciphersuite.
+}
+
+component_test_tls1_2_default_cbc_legacy_cipher_only () {
+    msg "build: default with only CBC-legacy cipher"
+
+    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    #Disable TLS 1.3 (as no AEAD)
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+    scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
+    # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
+    # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+    # Modules that depend on AEAD
+    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+    scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+    make
+
+    msg "test: default with only CBC-legacy cipher"
+    make test
+
+    msg "test: default with only CBC-legacy cipher - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f "TLS 1.2"
+}
+
+component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only () {
+    msg "build: default with only CBC-legacy and CBC-EtM ciphers"
+
+    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    #Disable TLS 1.3 (as no AEAD)
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+    scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
+    # Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC
+    # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+    # Modules that depend on AEAD
+    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+    scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+    make
+
+    msg "test: default with only CBC-legacy and CBC-EtM ciphers"
+    make test
+
+    msg "test: default with only CBC-legacy and CBC-EtM ciphers - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f "TLS 1.2"
+}
+
+# We're not aware of any other (open source) implementation of EC J-PAKE in TLS
+# that we could use for interop testing. However, we now have sort of two
+# implementations ourselves: one using PSA, the other not. At least test that
+# these two interoperate with each other.
+component_test_tls1_2_ecjpake_compatibility () {
+    msg "build: TLS1.2 server+client w/ EC-JPAKE w/o USE_PSA"
+    scripts/config.py set MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+    # Explicitly make lib first to avoid a race condition:
+    # https://github.com/Mbed-TLS/mbedtls/issues/8229
+    make lib
+    make -C programs ssl/ssl_server2 ssl/ssl_client2
+    cp programs/ssl/ssl_server2 s2_no_use_psa
+    cp programs/ssl/ssl_client2 c2_no_use_psa
+
+    msg "build: TLS1.2 server+client w/ EC-JPAKE w/ USE_PSA"
+    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+    make clean
+    make lib
+    make -C programs ssl/ssl_server2 ssl/ssl_client2
+    make -C programs test/udp_proxy test/query_compile_time_config
+
+    msg "test: server w/o USE_PSA - client w/ USE_PSA, text password"
+    P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
+    msg "test: server w/o USE_PSA - client w/ USE_PSA, opaque password"
+    P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password client only, working, TLS"
+    msg "test: client w/o USE_PSA - server w/ USE_PSA, text password"
+    P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
+    msg "test: client w/o USE_PSA - server w/ USE_PSA, opaque password"
+    P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password server only, working, TLS"
+
+    rm s2_no_use_psa c2_no_use_psa
+}
+
+component_test_small_ssl_out_content_len () {
+    msg "build: small SSL_OUT_CONTENT_LEN (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
+    scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: small SSL_OUT_CONTENT_LEN - ssl-opt.sh MFL and large packet tests"
+    tests/ssl-opt.sh -f "Max fragment\|Large packet"
+}
+
+component_test_small_ssl_in_content_len () {
+    msg "build: small SSL_IN_CONTENT_LEN (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 4096
+    scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 16384
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: small SSL_IN_CONTENT_LEN - ssl-opt.sh MFL tests"
+    tests/ssl-opt.sh -f "Max fragment"
+}
+
+component_test_small_ssl_dtls_max_buffering () {
+    msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0"
+    scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 1000
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0 - ssl-opt.sh specific reordering test"
+    tests/ssl-opt.sh -f "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg"
+}
+
+component_test_small_mbedtls_ssl_dtls_max_buffering () {
+    msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1"
+    scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 190
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1 - ssl-opt.sh specific reordering test"
+    tests/ssl-opt.sh -f "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket"
+}
+
+component_test_depends_py_kex () {
+    msg "test/build: depends.py kex (gcc)"
+    tests/scripts/depends.py kex --unset-use-psa
+}
+
+component_test_depends_py_kex_psa () {
+    msg "test/build: depends.py kex (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
+    tests/scripts/depends.py kex
+}
+
+# Common helper for component_full_without_ecdhe_ecdsa() and
+# component_full_without_ecdhe_ecdsa_and_tls13() which:
+# - starts from the "full" configuration minus the list of symbols passed in
+#   as 1st parameter
+# - build
+# - test only TLS (i.e. test_suite_tls and ssl-opt)
+build_full_minus_something_and_test_tls () {
+    symbols_to_disable="$1"
+
+    msg "build: full minus something, test TLS"
+
+    scripts/config.py full
+    for sym in $symbols_to_disable; do
+        echo "Disabling $sym"
+        scripts/config.py unset $sym
+    done
+
+    make
+
+    msg "test: full minus something, test TLS"
+    ( cd tests; ./test_suite_ssl )
+
+    msg "ssl-opt: full minus something, test TLS"
+    tests/ssl-opt.sh
+}
+
+component_full_without_ecdhe_ecdsa () {
+    build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED"
+}
+
+component_full_without_ecdhe_ecdsa_and_tls13 () {
+    build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+                                             MBEDTLS_SSL_PROTO_TLS1_3"
+}
+
+component_build_no_ssl_srv () {
+    msg "build: full config except SSL server, make, gcc" # ~ 30s
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_SSL_SRV_C
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
+}
+
+component_build_no_ssl_cli () {
+    msg "build: full config except SSL client, make, gcc" # ~ 30s
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_SSL_CLI_C
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
+}
+
+component_test_no_max_fragment_length () {
+    # Run max fragment length tests with MFL disabled
+    msg "build: default config except MFL extension (ASan build)" # ~ 30s
+    scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: ssl-opt.sh, MFL-related tests"
+    tests/ssl-opt.sh -f "Max fragment length"
+}
+
+component_test_asan_remove_peer_certificate () {
+    msg "build: default config with MBEDTLS_SSL_KEEP_PEER_CERTIFICATE disabled (ASan build)"
+    scripts/config.py unset MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+    make test
+
+    msg "test: ssl-opt.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+    tests/ssl-opt.sh
+
+    msg "test: compat.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+    tests/compat.sh
+
+    msg "test: context-info.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+    tests/context-info.sh
+}
+
+component_test_no_max_fragment_length_small_ssl_out_content_len () {
+    msg "build: no MFL extension, small SSL_OUT_CONTENT_LEN (ASan build)"
+    scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+    scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
+    scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MFL tests (disabled MFL extension case) & large packet tests"
+    tests/ssl-opt.sh -f "Max fragment length\|Large buffer"
+
+    msg "test: context-info.sh (disabled MFL extension case)"
+    tests/context-info.sh
+}
+
+component_test_variable_ssl_in_out_buffer_len () {
+    msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+    make test
+
+    msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+    tests/ssl-opt.sh
+
+    msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+    tests/compat.sh
+}
+
+component_test_dtls_cid_legacy () {
+    msg "build: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT 1
+
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy)"
+    make test
+
+    msg "test: ssl-opt.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
+    tests/ssl-opt.sh
+
+    msg "test: compat.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
+    tests/compat.sh
+}
+
+component_test_ssl_alloc_buffer_and_mfl () {
+    msg "build: default config with memory buffer allocator and MFL extension"
+    scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
+    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
+    scripts/config.py set MBEDTLS_MEMORY_DEBUG
+    scripts/config.py set MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+    scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+    cmake -DCMAKE_BUILD_TYPE:String=Release .
+    make
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
+    make test
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
+    tests/ssl-opt.sh -f "Handshake memory usage"
+}
+
+component_test_when_no_ciphersuites_have_mac () {
+    msg "build: when no ciphersuites have MAC"
+    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+    scripts/config.py unset MBEDTLS_CMAC_C
+    make
+
+    msg "test: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
+    make test
+
+    msg "test ssl-opt.sh: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
+    tests/ssl-opt.sh -f 'Default\|EtM' -e 'without EtM'
+}
+
+component_test_tls12_only () {
+    msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_3, cmake, gcc, ASan"
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: main suites (inc. selftests) (ASan build)"
+    make test
+
+    msg "test: ssl-opt.sh (ASan build)"
+    tests/ssl-opt.sh
+
+    msg "test: compat.sh (ASan build)"
+    tests/compat.sh
+}
+
+component_test_tls13_only () {
+    msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_2"
+    scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+    scripts/config.py set MBEDTLS_SSL_RECORD_SIZE_LIMIT
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test: TLS 1.3 only, all key exchange modes enabled"
+    make test
+
+    msg "ssl-opt.sh: TLS 1.3 only, all key exchange modes enabled"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk () {
+    msg "build: TLS 1.3 only from default, only PSK key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_ECDH_C
+    scripts/config.py unset MBEDTLS_DHM_C
+    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_PKCS1_V21
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, only PSK key exchange mode enabled"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, only PSK key exchange mode enabled"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_ephemeral () {
+    msg "build: TLS 1.3 only from default, only ephemeral key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, only ephemeral key exchange mode"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, only ephemeral key exchange mode"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_ephemeral_ffdh () {
+    msg "build: TLS 1.3 only from default, only ephemeral ffdh key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
+    scripts/config.py unset MBEDTLS_ECDH_C
+
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, only ephemeral ffdh key exchange mode"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, only ephemeral ffdh key exchange mode"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk_ephemeral () {
+    msg "build: TLS 1.3 only from default, only PSK ephemeral key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_PKCS1_V21
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral key exchange mode"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral key exchange mode"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk_ephemeral_ffdh () {
+    msg "build: TLS 1.3 only from default, only PSK ephemeral ffdh key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_PKCS1_V21
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    scripts/config.py unset MBEDTLS_ECDH_C
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk_all () {
+    msg "build: TLS 1.3 only from default, without ephemeral key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_PKCS1_V21
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_ephemeral_all () {
+    msg "build: TLS 1.3 only from default, without PSK key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_no_padding () {
+    msg "build: default config plus early data minus padding"
+    scripts/config.py set MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1
+    scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+    msg "test: default config plus early data minus padding"
+    make test
+    msg "ssl-opt.sh (TLS 1.3 no padding)"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_no_compatibility_mode () {
+    msg "build: default config plus early data minus middlebox compatibility mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+    msg "test: default config plus early data minus middlebox compatibility mode"
+    make test
+    msg "ssl-opt.sh (TLS 1.3 no compatibility mode)"
+    tests/ssl-opt.sh
+}
+
+component_test_full_minus_session_tickets () {
+    msg "build: full config without session tickets"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_SSL_SESSION_TICKETS
+    scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+    msg "test: full config without session tickets"
+    make test
+    msg "ssl-opt.sh (full config without session tickets)"
+    tests/ssl-opt.sh
+}