diff --git a/ChangeLog b/ChangeLog
index 2599fe9..fdc66fe 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -2,9 +2,23 @@
 
 = mbed TLS 2.2.0 released 2015-10-xx
 
+Features
+   * Experimental support for EC J-PAKE as defined in Thread 1.0.0.
+     Disabled by default as the specification might still change.
+   * Added a key extraction callback to accees the master secret and key
+     block. (Potential uses include EAP-TLS and Thread.)
+
 Bugfix
-   * Fix bug causing some handshakes to fail due to some non-fatal alerts not
-     begin properly ignored. Found by mancha and Kasom Koht-arsa, #308
+   * Fixed a bug causing some handshakes to fail due to some non-fatal alerts
+     not being properly ignored. Found by mancha and Kasom Koht-arsa, #308
+   * mbedtls_x509_crt_verify(_with_profile)() now also checks the key type and
+     size/curve against the profile. Before that, there was no way to set a
+     minimum key size for end-entity certificates with RSA keys. Found by
+     Matthew Page of Scannex Electronics Ltd.
+
+Changes
+   * Improved performance of mbedtls_ecp_muladd() when one of the scalars is 1
+     or -1.
 
 = mbed TLS 2.1.2 released 2015-10-06
 
diff --git a/configs/config-thread.h b/configs/config-thread.h
new file mode 100644
index 0000000..453b17f
--- /dev/null
+++ b/configs/config-thread.h
@@ -0,0 +1,94 @@
+/*
+ *  Minimal configuration for using TLS as part of Thread
+ *
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+
+/*
+ * Minimal configuration for using TLS a part of Thread
+ * http://threadgroup.org/
+ *
+ * Distinguishing features:
+ * - no RSA or classic DH, fully based on ECC
+ * - no X.509
+ * - support for experimental EC J-PAKE key exchange
+ *
+ * See README.txt for usage instructions.
+ */
+
+#ifndef MBEDTLS_CONFIG_H
+#define MBEDTLS_CONFIG_H
+
+/* System support */
+#define MBEDTLS_HAVE_ASM
+
+/* mbed TLS feature support */
+#define MBEDTLS_AES_ROM_TABLES
+#define MBEDTLS_ECP_DP_SECP256R1_ENABLED
+#define MBEDTLS_ECP_NIST_OPTIM
+#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+#define MBEDTLS_SSL_PROTO_TLS1_2
+#define MBEDTLS_SSL_PROTO_DTLS
+#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
+#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
+#define MBEDTLS_SSL_EXPORT_KEYS
+
+/* mbed TLS modules */
+#define MBEDTLS_AES_C
+#define MBEDTLS_ASN1_PARSE_C
+#define MBEDTLS_ASN1_WRITE_C
+#define MBEDTLS_BIGNUM_C
+#define MBEDTLS_CCM_C
+#define MBEDTLS_CIPHER_C
+#define MBEDTLS_CTR_DRBG_C
+#define MBEDTLS_ECJPAKE_C
+#define MBEDTLS_ECP_C
+#define MBEDTLS_ENTROPY_C
+#define MBEDTLS_HMAC_DRBG_C
+#define MBEDTLS_MD_C
+#define MBEDTLS_OID_C
+#define MBEDTLS_PK_C
+#define MBEDTLS_PK_PARSE_C
+#define MBEDTLS_SHA256_C
+#define MBEDTLS_SSL_COOKIE_C
+#define MBEDTLS_SSL_CLI_C
+#define MBEDTLS_SSL_SRV_C
+#define MBEDTLS_SSL_TLS_C
+
+/* For tests using ssl-opt.sh */
+#define MBEDTLS_NET_C
+#define MBEDTLS_TIMING_C
+
+/* Save RAM at the expense of ROM */
+#define MBEDTLS_AES_ROM_TABLES
+
+/* Save RAM by adjusting to our exact needs */
+#define MBEDTLS_ECP_MAX_BITS             256
+#define MBEDTLS_MPI_MAX_SIZE              32 // 256 bits is 32 bytes
+
+/* Save ROM and a few bytes of RAM by specifying our own ciphersuite list */
+#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8
+
+#if defined(TARGET_LIKE_MBED)
+#include "mbedtls/target_config.h"
+#endif
+
+#include "mbedtls/check_config.h"
+
+#endif /* MBEDTLS_CONFIG_H */
diff --git a/include/mbedtls/check_config.h b/include/mbedtls/check_config.h
index 8dadbe1..b6448ec 100644
--- a/include/mbedtls/check_config.h
+++ b/include/mbedtls/check_config.h
@@ -88,6 +88,11 @@
 #error "MBEDTLS_ECDSA_C defined, but not all prerequisites"
 #endif
 
+#if defined(MBEDTLS_ECJPAKE_C) &&           \
+    ( !defined(MBEDTLS_ECP_C) || !defined(MBEDTLS_MD_C) )
+#error "MBEDTLS_ECJPAKE_C defined, but not all prerequisites"
+#endif
+
 #if defined(MBEDTLS_ECDSA_DETERMINISTIC) && !defined(MBEDTLS_HMAC_DRBG_C)
 #error "MBEDTLS_ECDSA_DETERMINISTIC defined, but not all prerequisites"
 #endif
@@ -187,6 +192,12 @@
 #error "MBEDTLS_KEY_EXCHANGE_RSA_ENABLED defined, but not all prerequisites"
 #endif
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) &&                    \
+    ( !defined(MBEDTLS_ECJPAKE_C) || !defined(MBEDTLS_SHA256_C) ||      \
+      !defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) )
+#error "MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED defined, but not all prerequisites"
+#endif
+
 #if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) &&                          \
     ( !defined(MBEDTLS_PLATFORM_C) || !defined(MBEDTLS_PLATFORM_MEMORY) )
 #error "MBEDTLS_MEMORY_BUFFER_ALLOC_C defined, but not all prerequisites"
diff --git a/include/mbedtls/config.h b/include/mbedtls/config.h
index 68153ef..3e39998 100644
--- a/include/mbedtls/config.h
+++ b/include/mbedtls/config.h
@@ -695,6 +695,25 @@
 #define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
 
 /**
+ * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+ *
+ * Enable the ECJPAKE based ciphersuite modes in SSL / TLS.
+ *
+ * \warning This is currently experimental. EC J-PAKE support is based on the
+ * Thread v1.0.0 specification; incompatible changes to the specification
+ * might still happen. For this reason, this is disabled by default.
+ *
+ * Requires: MBEDTLS_ECJPAKE_C
+ *           MBEDTLS_SHA256_C
+ *           MBEDTLS_ECP_DP_SECP256R1_ENABLED
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8
+ */
+//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+
+/**
  * \def MBEDTLS_PK_PARSE_EC_EXTENDED
  *
  * Enhance support for reading EC keys using variants of SEC1 not allowed by
@@ -1176,6 +1195,16 @@
 #define MBEDTLS_SSL_SESSION_TICKETS
 
 /**
+ * \def MBEDTLS_SSL_EXPORT_KEYS
+ *
+ * Enable support for exporting key block and master secret.
+ * This is required for certain users of TLS, e.g. EAP-TLS.
+ *
+ * Comment this macro to disable support for key export
+ */
+#define MBEDTLS_SSL_EXPORT_KEYS
+
+/**
  * \def MBEDTLS_SSL_SERVER_NAME_INDICATION
  *
  * Enable support for RFC 6066 server name indication (SNI) in SSL.
@@ -1689,6 +1718,25 @@
 #define MBEDTLS_ECDSA_C
 
 /**
+ * \def MBEDTLS_ECJPAKE_C
+ *
+ * Enable the elliptic curve J-PAKE library.
+ *
+ * \warning This is currently experimental. EC J-PAKE support is based on the
+ * Thread v1.0.0 specification; incompatible changes to the specification
+ * might still happen. For this reason, this is disabled by default.
+ *
+ * Module:  library/ecjpake.c
+ * Caller:
+ *
+ * This module is used by the following key exchanges:
+ *      ECJPAKE
+ *
+ * Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C
+ */
+//#define MBEDTLS_ECJPAKE_C
+
+/**
  * \def MBEDTLS_ECP_C
  *
  * Enable the elliptic curve over GF(p) library.
@@ -1696,6 +1744,7 @@
  * Module:  library/ecp.c
  * Caller:  library/ecdh.c
  *          library/ecdsa.c
+ *          library/ecjpake.c
  *
  * Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED
  */
diff --git a/include/mbedtls/ecjpake.h b/include/mbedtls/ecjpake.h
new file mode 100644
index 0000000..3bbf27e
--- /dev/null
+++ b/include/mbedtls/ecjpake.h
@@ -0,0 +1,238 @@
+/**
+ * \file ecjpake.h
+ *
+ * \brief Elliptic curve J-PAKE
+ *
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_ECJPAKE_H
+#define MBEDTLS_ECJPAKE_H
+
+/*
+ * J-PAKE is a password-authenticated key exchange that allows deriving a
+ * strong shared secret from a (potentially low entropy) pre-shared
+ * passphrase, with forward secrecy and mutual authentication.
+ * https://en.wikipedia.org/wiki/Password_Authenticated_Key_Exchange_by_Juggling
+ *
+ * This file implements the Elliptic Curve variant of J-PAKE,
+ * as defined in Chapter 7.4 of the Thread v1.0 Specification,
+ * available to members of the Thread Group http://threadgroup.org/
+ *
+ * As the J-PAKE algorithm is inherently symmetric, so is our API.
+ * Each party needs to send its first round message, in any order, to the
+ * other party, then each sends its second round message, in any order.
+ * The payloads are serialized in a way suitable for use in TLS, but could
+ * also be use outside TLS.
+ */
+
+#include "ecp.h"
+#include "md.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Roles in the EC J-PAKE exchange
+ */
+typedef enum {
+    MBEDTLS_ECJPAKE_CLIENT = 0,         /**< Client                         */
+    MBEDTLS_ECJPAKE_SERVER,             /**< Server                         */
+} mbedtls_ecjpake_role;
+
+/**
+ * EC J-PAKE context structure.
+ *
+ * J-PAKE is a symmetric protocol, except for the identifiers used in
+ * Zero-Knowledge Proofs, and the serialization of the second message
+ * (KeyExchange) as defined by the Thread spec.
+ *
+ * In order to benefit from this symmetry, we choose a different naming
+ * convetion from the Thread v1.0 spec. Correspondance is indicated in the
+ * description as a pair C: <client name>, S: <server name>
+ */
+typedef struct
+{
+    const mbedtls_md_info_t *md_info;   /**< Hash to use                    */
+    mbedtls_ecp_group grp;              /**< Elliptic curve                 */
+    mbedtls_ecjpake_role role;          /**< Are we client or server?       */
+    int point_format;                   /**< Format for point export        */
+
+    mbedtls_ecp_point Xm1;              /**< My public key 1   C: X1, S: X3 */
+    mbedtls_ecp_point Xm2;              /**< My public key 2   C: X2, S: X4 */
+    mbedtls_ecp_point Xp1;              /**< Peer public key 1 C: X3, S: X1 */
+    mbedtls_ecp_point Xp2;              /**< Peer public key 2 C: X4, S: X2 */
+    mbedtls_ecp_point Xp;               /**< Peer public key   C: Xs, S: Xc */
+
+    mbedtls_mpi xm1;                    /**< My private key 1  C: x1, S: x3 */
+    mbedtls_mpi xm2;                    /**< My private key 2  C: x2, S: x4 */
+
+    mbedtls_mpi s;                      /**< Pre-shared secret (passphrase) */
+} mbedtls_ecjpake_context;
+
+/**
+ * \brief           Initialize a context
+ *                  (just makes it ready for setup() or free()).
+ *
+ * \param ctx       context to initialize
+ */
+void mbedtls_ecjpake_init( mbedtls_ecjpake_context *ctx );
+
+/**
+ * \brief           Set up a context for use
+ *
+ * \note            Currently the only values for hash/curve allowed by the
+ *                  standard are MBEDTLS_MD_SHA256/MBEDTLS_ECP_DP_SECP256R1.
+ *
+ * \param ctx       context to set up
+ * \param role      Our role: client or server
+ * \param hash      hash function to use (MBEDTLS_MD_XXX)
+ * \param curve     elliptic curve identifier (MBEDTLS_ECP_DP_XXX)
+ * \param secret    pre-shared secret (passphrase)
+ * \param len       length of the shared secret
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_setup( mbedtls_ecjpake_context *ctx,
+                           mbedtls_ecjpake_role role,
+                           mbedtls_md_type_t hash,
+                           mbedtls_ecp_group_id curve,
+                           const unsigned char *secret,
+                           size_t len );
+
+/*
+ * \brief           Check if a context is ready for use
+ *
+ * \param ctx       Context to check
+ *
+ * \return          0 if the context is ready for use,
+ *                  MBEDTLS_ERR_ECP_BAD_INPUT_DATA otherwise
+ */
+int mbedtls_ecjpake_check( const mbedtls_ecjpake_context *ctx );
+
+/**
+ * \brief           Generate and write the first round message
+ *                  (TLS: contents of the Client/ServerHello extension,
+ *                  excluding extension type and length bytes)
+ *
+ * \param ctx       Context to use
+ * \param buf       Buffer to write the contents to
+ * \param len       Buffer size
+ * \param olen      Will be updated with the number of bytes written
+ * \param f_rng     RNG function
+ * \param p_rng     RNG parameter
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_write_round_one( mbedtls_ecjpake_context *ctx,
+                            unsigned char *buf, size_t len, size_t *olen,
+                            int (*f_rng)(void *, unsigned char *, size_t),
+                            void *p_rng );
+
+/**
+ * \brief           Read and process the first round message
+ *                  (TLS: contents of the Client/ServerHello extension,
+ *                  excluding extension type and length bytes)
+ *
+ * \param ctx       Context to use
+ * \param buf       Pointer to extension contents
+ * \param len       Extension length
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_read_round_one( mbedtls_ecjpake_context *ctx,
+                                    const unsigned char *buf,
+                                    size_t len );
+
+/**
+ * \brief           Generate and write the second round message
+ *                  (TLS: contents of the Client/ServerKeyExchange)
+ *
+ * \param ctx       Context to use
+ * \param buf       Buffer to write the contents to
+ * \param len       Buffer size
+ * \param olen      Will be updated with the number of bytes written
+ * \param f_rng     RNG function
+ * \param p_rng     RNG parameter
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_write_round_two( mbedtls_ecjpake_context *ctx,
+                            unsigned char *buf, size_t len, size_t *olen,
+                            int (*f_rng)(void *, unsigned char *, size_t),
+                            void *p_rng );
+
+/**
+ * \brief           Read and process the second round message
+ *                  (TLS: contents of the Client/ServerKeyExchange)
+ *
+ * \param ctx       Context to use
+ * \param buf       Pointer to the message
+ * \param len       Message length
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_read_round_two( mbedtls_ecjpake_context *ctx,
+                                    const unsigned char *buf,
+                                    size_t len );
+
+/**
+ * \brief           Derive the shared secret
+ *                  (TLS: Pre-Master Secret)
+ *
+ * \param ctx       Context to use
+ * \param buf       Buffer to write the contents to
+ * \param len       Buffer size
+ * \param olen      Will be updated with the number of bytes written
+ * \param f_rng     RNG function
+ * \param p_rng     RNG parameter
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_derive_secret( mbedtls_ecjpake_context *ctx,
+                            unsigned char *buf, size_t len, size_t *olen,
+                            int (*f_rng)(void *, unsigned char *, size_t),
+                            void *p_rng );
+
+/**
+ * \brief           Free a context's content
+ *
+ * \param ctx       context to free
+ */
+void mbedtls_ecjpake_free( mbedtls_ecjpake_context *ctx );
+
+#if defined(MBEDTLS_SELF_TEST)
+/**
+ * \brief          Checkup routine
+ *
+ * \return         0 if successful, or 1 if a test failed
+ */
+int mbedtls_ecjpake_self_test( int verbose );
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ecjpake.h */
diff --git a/include/mbedtls/ecp.h b/include/mbedtls/ecp.h
index 723e46c..5246c78 100644
--- a/include/mbedtls/ecp.h
+++ b/include/mbedtls/ecp.h
@@ -347,6 +347,21 @@
 int mbedtls_ecp_is_zero( mbedtls_ecp_point *pt );
 
 /**
+ * \brief           Compare two points
+ *
+ * \note            This assumes the points are normalized. Otherwise,
+ *                  they may compare as "not equal" even if they are.
+ *
+ * \param P         First point to compare
+ * \param Q         Second point to compare
+ *
+ * \return          0 if the points are equal,
+ *                  MBEDTLS_ERR_ECP_BAD_INPUT_DATA otherwise
+ */
+int mbedtls_ecp_point_cmp( const mbedtls_ecp_point *P,
+                           const mbedtls_ecp_point *Q );
+
+/**
  * \brief           Import a non-zero point from two ASCII strings
  *
  * \param P         Destination point
@@ -570,6 +585,29 @@
 int mbedtls_ecp_check_privkey( const mbedtls_ecp_group *grp, const mbedtls_mpi *d );
 
 /**
+ * \brief           Generate a keypair with configurable base point
+ *
+ * \param grp       ECP group
+ * \param G         Chosen base point
+ * \param d         Destination MPI (secret part)
+ * \param Q         Destination point (public part)
+ * \param f_rng     RNG function
+ * \param p_rng     RNG parameter
+ *
+ * \return          0 if successful,
+ *                  or a MBEDTLS_ERR_ECP_XXX or MBEDTLS_MPI_XXX error code
+ *
+ * \note            Uses bare components rather than an mbedtls_ecp_keypair structure
+ *                  in order to ease use with other structures such as
+ *                  mbedtls_ecdh_context of mbedtls_ecdsa_context.
+ */
+int mbedtls_ecp_gen_keypair_base( mbedtls_ecp_group *grp,
+                     const mbedtls_ecp_point *G,
+                     mbedtls_mpi *d, mbedtls_ecp_point *Q,
+                     int (*f_rng)(void *, unsigned char *, size_t),
+                     void *p_rng );
+
+/**
  * \brief           Generate a keypair
  *
  * \param grp       ECP group
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index a017ec0..cd0505f 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -352,6 +352,8 @@
 
 #define MBEDTLS_TLS_EXT_SESSION_TICKET              35
 
+#define MBEDTLS_TLS_EXT_ECJPAKE_KKPP               256 /* experimental */
+
 #define MBEDTLS_TLS_EXT_RENEGOTIATION_INFO      0xFF01
 
 /*
@@ -390,6 +392,9 @@
     unsigned char _pms_ecdhe_psk[4 + MBEDTLS_ECP_MAX_BYTES
                                    + MBEDTLS_PSK_MAX_LEN];     /* RFC 5489 2 */
 #endif
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    unsigned char _pms_ecjpake[32];     /* Thread spec: SHA-256 output */
+#endif
 };
 
 #define MBEDTLS_PREMASTER_SIZE     sizeof( union mbedtls_ssl_premaster_secret )
@@ -542,6 +547,13 @@
     void *p_ticket;                 /*!< context for the ticket callbacks   */
 #endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_SRV_C */
 
+#if defined(MBEDTLS_SSL_EXPORT_KEYS)
+    /** Callback to export key block and master secret                      */
+    int (*f_export_keys)( void *, const unsigned char *,
+            const unsigned char *, size_t, size_t, size_t );
+    void *p_export_keys;            /*!< context for key export callback    */
+#endif
+
 #if defined(MBEDTLS_X509_CRT_PARSE_C)
     const mbedtls_x509_crt_profile *cert_profile; /*!< verification profile */
     mbedtls_ssl_key_cert *key_cert; /*!< own certificate/key pair(s)        */
@@ -1069,6 +1081,35 @@
                                         size_t *tlen,
                                         uint32_t *lifetime );
 
+#if defined(MBEDTLS_SSL_EXPORT_KEYS)
+/**
+ * \brief           Callback type: Export key block and master secret
+ *
+ * \note            This is required for certain uses of TLS, e.g. EAP-TLS
+ *                  (RFC 5216) and Thread. The key pointers are ephemeral and
+ *                  therefore must not be stored. The master secret and keys
+ *                  should not be used directly except as an input to a key
+ *                  derivation function.
+ *
+ * \param p_expkey  Context for the callback
+ * \param ms        Pointer to master secret (fixed length: 48 bytes)
+ * \param kb        Pointer to key block, see RFC 5246 section 6.3
+ *                  (variable length: 2 * maclen + 2 * keylen + 2 * ivlen).
+ * \param maclen    MAC length
+ * \param keylen    Key length
+ * \param ivlen     IV length
+ *
+ * \return          0 if successful, or
+ *                  a specific MBEDTLS_ERR_XXX code.
+ */
+typedef int mbedtls_ssl_export_keys_t( void *p_expkey,
+                                const unsigned char *ms,
+                                const unsigned char *kb,
+                                size_t maclen,
+                                size_t keylen,
+                                size_t ivlen );
+#endif /* MBEDTLS_SSL_EXPORT_KEYS */
+
 /**
  * \brief           Callback type: parse and load session ticket
  *
@@ -1118,6 +1159,22 @@
         void *p_ticket );
 #endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_SRV_C */
 
+#if defined(MBEDTLS_SSL_EXPORT_KEYS)
+/**
+ * \brief           Configure key export callback.
+ *                  (Default: none.)
+ *
+ * \note            See \c mbedtls_ssl_export_keys_t.
+ *
+ * \param conf      SSL configuration context
+ * \param f_export_keys     Callback for exporting keys
+ * \param p_export_keys     Context for the callback
+ */
+void mbedtls_ssl_conf_export_keys_cb( mbedtls_ssl_config *conf,
+        mbedtls_ssl_export_keys_t *f_export_keys,
+        void *p_export_keys );
+#endif /* MBEDTLS_SSL_EXPORT_KEYS */
+
 /**
  * \brief          Callback type: generate a cookie
  *
@@ -1385,6 +1442,10 @@
 /**
  * \brief          Set the X.509 security profile used for verification
  *
+ * \note           The restrictions are enforced for all certificates in the
+ *                 chain. However, signatures in the handshake are not covered
+ *                 by this setting but by \b mbedtls_ssl_conf_sig_hashes().
+ *
  * \param conf     SSL configuration
  * \param profile  Profile to use
  */
@@ -1546,16 +1607,14 @@
  *                 On client: this affects the list of curves offered for any
  *                 use. The server can override our preference order.
  *
- *                 Both sides: limits the set of curves used by peer to the
- *                 listed curves for any use ECDHE and the end-entity
- *                 certificate.
+ *                 Both sides: limits the set of curves accepted for use in
+ *                 ECDHE and in the peer's end-entity certificate.
  *
- * \note           This has no influence on which curve are allowed inside the
+ * \note           This has no influence on which curves are allowed inside the
  *                 certificate chains, see \c mbedtls_ssl_conf_cert_profile()
- *                 for that. For example, if the peer's certificate chain is
- *                 EE -> CA_int -> CA_root, then the allowed curves for EE are
- *                 controlled by \c mbedtls_ssl_conf_curves() but for CA_int
- *                 and CA_root it's \c mbedtls_ssl_conf_cert_profile().
+ *                 for that. For the end-entity certificate however, the key
+ *                 will be accepted only if it is allowed both by this list
+ *                 and by the cert profile.
  *
  * \note           This list should be ordered by decreasing preference
  *                 (preferred curve first).
@@ -1679,6 +1738,29 @@
                   void *p_sni );
 #endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+/**
+ * \brief          Set the EC J-PAKE password for current handshake.
+ *
+ * \note           An internal copy is made, and destroyed as soon as the
+ *                 handshake is completed, or when the SSL context is reset or
+ *                 freed.
+ *
+ * \note           The SSL context needs to be already set up. The right place
+ *                 to call this function is between \c mbedtls_ssl_setup() or
+ *                 \c mbedtls_ssl_reset() and \c mbedtls_ssl_handshake().
+ *
+ * \param ssl      SSL context
+ * \param pw       EC J-PAKE password (pre-shared secret)
+ * \param pw_len   length of pw in bytes
+ *
+ * \return         0 on success, or a negative error code.
+ */
+int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl,
+                                         const unsigned char *pw,
+                                         size_t pw_len );
+#endif /*MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
+
 #if defined(MBEDTLS_SSL_ALPN)
 /**
  * \brief          Set the supported Application Layer Protocols.
diff --git a/include/mbedtls/ssl_ciphersuites.h b/include/mbedtls/ssl_ciphersuites.h
index 75d4a8a..9cf3f42 100644
--- a/include/mbedtls/ssl_ciphersuites.h
+++ b/include/mbedtls/ssl_ciphersuites.h
@@ -229,6 +229,8 @@
 #define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8      0xC0AE  /**< TLS 1.2 */
 #define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CCM_8      0xC0AF  /**< TLS 1.2 */
 
+#define MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8          0xC0FF  /**< experimental */
+
 /* Reminder: update mbedtls_ssl_premaster_secret when adding a new key exchange.
  * Reminder: update MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED below.
  */
@@ -244,6 +246,7 @@
     MBEDTLS_KEY_EXCHANGE_ECDHE_PSK,
     MBEDTLS_KEY_EXCHANGE_ECDH_RSA,
     MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA,
+    MBEDTLS_KEY_EXCHANGE_ECJPAKE,
 } mbedtls_key_exchange_type_t;
 
 #if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED)          || \
diff --git a/include/mbedtls/ssl_internal.h b/include/mbedtls/ssl_internal.h
index 78c748c..ecfc971 100644
--- a/include/mbedtls/ssl_internal.h
+++ b/include/mbedtls/ssl_internal.h
@@ -41,6 +41,10 @@
 #include "sha512.h"
 #endif
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#include "ecjpake.h"
+#endif
+
 #if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
     !defined(inline) && !defined(__cplusplus)
 #define inline __inline
@@ -147,6 +151,7 @@
  * of state of the renegotiation flag, so no indicator is required)
  */
 #define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS_PRESENT (1 << 0)
+#define MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK                 (1 << 1)
 
 #ifdef __cplusplus
 extern "C" {
@@ -169,7 +174,15 @@
 #if defined(MBEDTLS_ECDH_C)
     mbedtls_ecdh_context ecdh_ctx;              /*!<  ECDH key exchange       */
 #endif
-#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    mbedtls_ecjpake_context ecjpake_ctx;        /*!< EC J-PAKE key exchange */
+#if defined(MBEDTLS_SSL_CLI_C)
+    unsigned char *ecjpake_cache;               /*!< Cache for ClientHello ext */
+    size_t ecjpake_cache_len;                   /*!< Length of cached data */
+#endif
+#endif
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
     const mbedtls_ecp_curve_info **curves;      /*!<  Supported elliptic curves */
 #endif
 #if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
diff --git a/include/mbedtls/x509_crt.h b/include/mbedtls/x509_crt.h
index 72b02ff..294f36a 100644
--- a/include/mbedtls/x509_crt.h
+++ b/include/mbedtls/x509_crt.h
@@ -301,8 +301,8 @@
  *                 security profile.
  *
  * \note           The restrictions on keys (RSA minimum size, allowed curves
- *                 for ECDSA) only applys to (intermediate) CAs, not to the
- *                 end-entity certificate.
+ *                 for ECDSA) apply to all certificates: trusted root,
+ *                 intermediate CAs if any, and end entity certificate.
  *
  * \param crt      a certificate to be verified
  * \param trust_ca the trusted CA chain
diff --git a/library/CMakeLists.txt b/library/CMakeLists.txt
index da66040..58a97e8 100644
--- a/library/CMakeLists.txt
+++ b/library/CMakeLists.txt
@@ -20,6 +20,7 @@
     dhm.c
     ecdh.c
     ecdsa.c
+    ecjpake.c
     ecp.c
     ecp_curves.c
     entropy.c
diff --git a/library/Makefile b/library/Makefile
index f72ae8e..7d25343 100644
--- a/library/Makefile
+++ b/library/Makefile
@@ -49,7 +49,8 @@
 		bignum.o	blowfish.o	camellia.o	\
 		ccm.o		cipher.o	cipher_wrap.o	\
 		ctr_drbg.o	des.o		dhm.o		\
-		ecdh.o		ecdsa.o		ecp.o		\
+		ecdh.o		ecdsa.o		ecjpake.o	\
+		ecp.o						\
 		ecp_curves.o	entropy.o	entropy_poll.o	\
 		error.o		gcm.o		havege.o	\
 		hmac_drbg.o	md.o		md2.o		\
diff --git a/library/ecjpake.c b/library/ecjpake.c
new file mode 100644
index 0000000..1fa1c2d
--- /dev/null
+++ b/library/ecjpake.c
@@ -0,0 +1,1103 @@
+/*
+ *  Elliptic curve J-PAKE
+ *
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+
+/*
+ * References in the code are to the Thread v1.0 Specification,
+ * available to members of the Thread Group http://threadgroup.org/
+ */
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "mbedtls/config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#if defined(MBEDTLS_ECJPAKE_C)
+
+#include "mbedtls/ecjpake.h"
+
+#include <string.h>
+
+/*
+ * Convert a mbedtls_ecjpake_role to identifier string
+ */
+static const char * const ecjpake_id[] = {
+    "client",
+    "server"
+};
+
+#define ID_MINE     ( ecjpake_id[ ctx->role ] )
+#define ID_PEER     ( ecjpake_id[ 1 - ctx->role ] )
+
+/*
+ * Initialize context
+ */
+void mbedtls_ecjpake_init( mbedtls_ecjpake_context *ctx )
+{
+    if( ctx == NULL )
+        return;
+
+    ctx->md_info = NULL;
+    mbedtls_ecp_group_init( &ctx->grp );
+    ctx->point_format = MBEDTLS_ECP_PF_UNCOMPRESSED;
+
+    mbedtls_ecp_point_init( &ctx->Xm1 );
+    mbedtls_ecp_point_init( &ctx->Xm2 );
+    mbedtls_ecp_point_init( &ctx->Xp1 );
+    mbedtls_ecp_point_init( &ctx->Xp2 );
+    mbedtls_ecp_point_init( &ctx->Xp  );
+
+    mbedtls_mpi_init( &ctx->xm1 );
+    mbedtls_mpi_init( &ctx->xm2 );
+    mbedtls_mpi_init( &ctx->s   );
+}
+
+/*
+ * Free context
+ */
+void mbedtls_ecjpake_free( mbedtls_ecjpake_context *ctx )
+{
+    if( ctx == NULL )
+        return;
+
+    ctx->md_info = NULL;
+    mbedtls_ecp_group_free( &ctx->grp );
+
+    mbedtls_ecp_point_free( &ctx->Xm1 );
+    mbedtls_ecp_point_free( &ctx->Xm2 );
+    mbedtls_ecp_point_free( &ctx->Xp1 );
+    mbedtls_ecp_point_free( &ctx->Xp2 );
+    mbedtls_ecp_point_free( &ctx->Xp  );
+
+    mbedtls_mpi_free( &ctx->xm1 );
+    mbedtls_mpi_free( &ctx->xm2 );
+    mbedtls_mpi_free( &ctx->s   );
+}
+
+/*
+ * Setup context
+ */
+int mbedtls_ecjpake_setup( mbedtls_ecjpake_context *ctx,
+                           mbedtls_ecjpake_role role,
+                           mbedtls_md_type_t hash,
+                           mbedtls_ecp_group_id curve,
+                           const unsigned char *secret,
+                           size_t len )
+{
+    int ret;
+
+    ctx->role = role;
+
+    if( ( ctx->md_info = mbedtls_md_info_from_type( hash ) ) == NULL )
+        return( MBEDTLS_ERR_MD_FEATURE_UNAVAILABLE );
+
+    MBEDTLS_MPI_CHK( mbedtls_ecp_group_load( &ctx->grp, curve ) );
+
+    MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &ctx->s, secret, len ) );
+
+cleanup:
+    if( ret != 0 )
+        mbedtls_ecjpake_free( ctx );
+
+    return( ret );
+}
+
+/*
+ * Check if context is ready for use
+ */
+int mbedtls_ecjpake_check( const mbedtls_ecjpake_context *ctx )
+{
+    if( ctx->md_info == NULL ||
+        ctx->grp.id == MBEDTLS_ECP_DP_NONE ||
+        ctx->s.p == NULL )
+    {
+        return( MBEDTLS_ERR_ECP_BAD_INPUT_DATA );
+    }
+
+    return( 0 );
+}
+
+/*
+ * Write a point plus its length to a buffer
+ */
+static int ecjpake_write_len_point( unsigned char **p,
+                                    const unsigned char *end,
+                                    const mbedtls_ecp_group *grp,
+                                    const int pf,
+                                    const mbedtls_ecp_point *P )
+{
+    int ret;
+    size_t len;
+
+    /* Need at least 4 for length plus 1 for point */
+    if( end < *p || end - *p < 5 )
+        return( MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL );
+
+    ret = mbedtls_ecp_point_write_binary( grp, P, pf,
+                                          &len, *p + 4, end - ( *p + 4 ) );
+    if( ret != 0 )
+        return( ret );
+
+    (*p)[0] = (unsigned char)( ( len >> 24 ) & 0xFF );
+    (*p)[1] = (unsigned char)( ( len >> 16 ) & 0xFF );
+    (*p)[2] = (unsigned char)( ( len >>  8 ) & 0xFF );
+    (*p)[3] = (unsigned char)( ( len       ) & 0xFF );
+
+    *p += 4 + len;
+
+    return( 0 );
+}
+
+/*
+ * Size of the temporary buffer for ecjpake_hash:
+ * 3 EC points plus their length, plus ID and its length (4 + 6 bytes)
+ */
+#define ECJPAKE_HASH_BUF_LEN    ( 3 * ( 4 + MBEDTLS_ECP_MAX_PT_LEN ) + 4 + 6 )
+
+/*
+ * Compute hash for ZKP (7.4.2.2.2.1)
+ */
+static int ecjpake_hash( const mbedtls_md_info_t *md_info,
+                         const mbedtls_ecp_group *grp,
+                         const int pf,
+                         const mbedtls_ecp_point *G,
+                         const mbedtls_ecp_point *V,
+                         const mbedtls_ecp_point *X,
+                         const char *id,
+                         mbedtls_mpi *h )
+{
+    int ret;
+    unsigned char buf[ECJPAKE_HASH_BUF_LEN];
+    unsigned char *p = buf;
+    const unsigned char *end = buf + sizeof( buf );
+    const size_t id_len = strlen( id );
+    unsigned char hash[MBEDTLS_MD_MAX_SIZE];
+
+    /* Write things to temporary buffer */
+    MBEDTLS_MPI_CHK( ecjpake_write_len_point( &p, end, grp, pf, G ) );
+    MBEDTLS_MPI_CHK( ecjpake_write_len_point( &p, end, grp, pf, V ) );
+    MBEDTLS_MPI_CHK( ecjpake_write_len_point( &p, end, grp, pf, X ) );
+
+    if( end - p < 4 )
+        return( MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL );
+
+    *p++ = (unsigned char)( ( id_len >> 24 ) & 0xFF );
+    *p++ = (unsigned char)( ( id_len >> 16 ) & 0xFF );
+    *p++ = (unsigned char)( ( id_len >>  8 ) & 0xFF );
+    *p++ = (unsigned char)( ( id_len       ) & 0xFF );
+
+    if( end < p || (size_t)( end - p ) < id_len )
+        return( MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL );
+
+    memcpy( p, id, id_len );
+    p += id_len;
+
+    /* Compute hash */
+    mbedtls_md( md_info, buf, p - buf, hash );
+
+    /* Turn it into an integer mod n */
+    MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( h, hash,
+                                        mbedtls_md_get_size( md_info ) ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( h, h, &grp->N ) );
+
+cleanup:
+    return( ret );
+}
+
+/*
+ * Parse a ECShnorrZKP (7.4.2.2.2) and verify it (7.4.2.3.3)
+ */
+static int ecjpake_zkp_read( const mbedtls_md_info_t *md_info,
+                             const mbedtls_ecp_group *grp,
+                             const int pf,
+                             const mbedtls_ecp_point *G,
+                             const mbedtls_ecp_point *X,
+                             const char *id,
+                             const unsigned char **p,
+                             const unsigned char *end )
+{
+    int ret;
+    mbedtls_ecp_point V, VV;
+    mbedtls_mpi r, h;
+    size_t r_len;
+
+    mbedtls_ecp_point_init( &V );
+    mbedtls_ecp_point_init( &VV );
+    mbedtls_mpi_init( &r );
+    mbedtls_mpi_init( &h );
+
+    /*
+     * struct {
+     *     ECPoint V;
+     *     opaque r<1..2^8-1>;
+     * } ECSchnorrZKP;
+     */
+    if( end < *p )
+        return( MBEDTLS_ERR_ECP_BAD_INPUT_DATA );
+
+    MBEDTLS_MPI_CHK( mbedtls_ecp_tls_read_point( grp, &V, p, end - *p ) );
+
+    if( end < *p || (size_t)( end - *p ) < 1 )
+    {
+        ret = MBEDTLS_ERR_ECP_BAD_INPUT_DATA;
+        goto cleanup;
+    }
+
+    r_len = *(*p)++;
+
+    if( end < *p || (size_t)( end - *p ) < r_len )
+    {
+        ret = MBEDTLS_ERR_ECP_BAD_INPUT_DATA;
+        goto cleanup;
+    }
+
+    MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &r, *p, r_len ) );
+    *p += r_len;
+
+    /*
+     * Verification
+     */
+    MBEDTLS_MPI_CHK( ecjpake_hash( md_info, grp, pf, G, &V, X, id, &h ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_muladd( (mbedtls_ecp_group *) grp,
+                     &VV, &h, X, &r, G ) );
+
+    if( mbedtls_ecp_point_cmp( &VV, &V ) != 0 )
+    {
+        ret = MBEDTLS_ERR_ECP_VERIFY_FAILED;
+        goto cleanup;
+    }
+
+cleanup:
+    mbedtls_ecp_point_free( &V );
+    mbedtls_ecp_point_free( &VV );
+    mbedtls_mpi_free( &r );
+    mbedtls_mpi_free( &h );
+
+    return( ret );
+}
+
+/*
+ * Generate ZKP (7.4.2.3.2) and write it as ECSchnorrZKP (7.4.2.2.2)
+ */
+static int ecjpake_zkp_write( const mbedtls_md_info_t *md_info,
+                              const mbedtls_ecp_group *grp,
+                              const int pf, 
+                              const mbedtls_ecp_point *G,
+                              const mbedtls_mpi *x,
+                              const mbedtls_ecp_point *X,
+                              const char *id,
+                              unsigned char **p,
+                              const unsigned char *end,
+                              int (*f_rng)(void *, unsigned char *, size_t),
+                              void *p_rng )
+{
+    int ret;
+    mbedtls_ecp_point V;
+    mbedtls_mpi v;
+    mbedtls_mpi h; /* later recycled to hold r */
+    size_t len;
+
+    if( end < *p )
+        return( MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL );
+
+    mbedtls_ecp_point_init( &V );
+    mbedtls_mpi_init( &v );
+    mbedtls_mpi_init( &h );
+
+    /* Compute signature */
+    MBEDTLS_MPI_CHK( mbedtls_ecp_gen_keypair_base( (mbedtls_ecp_group *) grp,
+                                                   G, &v, &V, f_rng, p_rng ) );
+    MBEDTLS_MPI_CHK( ecjpake_hash( md_info, grp, pf, G, &V, X, id, &h ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &h, &h, x ) ); /* x*h */
+    MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &h, &v, &h ) ); /* v - x*h */
+    MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &h, &h, &grp->N ) ); /* r */
+
+    /* Write it out */
+    MBEDTLS_MPI_CHK( mbedtls_ecp_tls_write_point( grp, &V,
+                pf, &len, *p, end - *p ) );
+    *p += len;
+
+    len = mbedtls_mpi_size( &h ); /* actually r */
+    if( end < *p || (size_t)( end - *p ) < 1 + len || len > 255 )
+    {
+        ret = MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL;
+        goto cleanup;
+    }
+
+    *(*p)++ = (unsigned char)( len & 0xFF );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &h, *p, len ) ); /* r */
+    *p += len;
+
+cleanup:
+    mbedtls_ecp_point_free( &V );
+    mbedtls_mpi_free( &v );
+    mbedtls_mpi_free( &h );
+
+    return( ret );
+}
+
+/*
+ * Parse a ECJPAKEKeyKP (7.4.2.2.1) and check proof
+ * Output: verified public key X
+ */
+static int ecjpake_kkp_read( const mbedtls_md_info_t *md_info,
+                             const mbedtls_ecp_group *grp,
+                             const int pf,
+                             const mbedtls_ecp_point *G,
+                             mbedtls_ecp_point *X,
+                             const char *id,
+                             const unsigned char **p,
+                             const unsigned char *end )
+{
+    int ret;
+
+    if( end < *p )
+        return( MBEDTLS_ERR_ECP_BAD_INPUT_DATA );
+
+    /*
+     * struct {
+     *     ECPoint X;
+     *     ECSchnorrZKP zkp;
+     * } ECJPAKEKeyKP;
+     */
+    MBEDTLS_MPI_CHK( mbedtls_ecp_tls_read_point( grp, X, p, end - *p ) );
+    if( mbedtls_ecp_is_zero( X ) )
+    {
+        ret = MBEDTLS_ERR_ECP_INVALID_KEY;
+        goto cleanup;
+    }
+
+    MBEDTLS_MPI_CHK( ecjpake_zkp_read( md_info, grp, pf, G, X, id, p, end ) );
+
+cleanup:
+    return( ret );
+}
+
+/*
+ * Generate an ECJPAKEKeyKP
+ * Output: the serialized structure, plus private/public key pair
+ */
+static int ecjpake_kkp_write( const mbedtls_md_info_t *md_info,
+                              const mbedtls_ecp_group *grp,
+                              const int pf,
+                              const mbedtls_ecp_point *G,
+                              mbedtls_mpi *x,
+                              mbedtls_ecp_point *X,
+                              const char *id,
+                              unsigned char **p,
+                              const unsigned char *end,
+                              int (*f_rng)(void *, unsigned char *, size_t),
+                              void *p_rng )
+{
+    int ret;
+    size_t len;
+
+    if( end < *p )
+        return( MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL );
+
+    /* Generate key (7.4.2.3.1) and write it out */
+    MBEDTLS_MPI_CHK( mbedtls_ecp_gen_keypair_base( (mbedtls_ecp_group *) grp, G, x, X,
+                                                   f_rng, p_rng ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_tls_write_point( grp, X,
+                pf, &len, *p, end - *p ) );
+    *p += len;
+
+    /* Generate and write proof */
+    MBEDTLS_MPI_CHK( ecjpake_zkp_write( md_info, grp, pf, G, x, X, id,
+                                        p, end, f_rng, p_rng ) );
+
+cleanup:
+    return( ret );
+}
+
+/*
+ * Read a ECJPAKEKeyKPPairList (7.4.2.3) and check proofs
+ * Ouputs: verified peer public keys Xa, Xb
+ */
+static int ecjpake_kkpp_read( const mbedtls_md_info_t *md_info,
+                              const mbedtls_ecp_group *grp,
+                              const int pf,
+                              const mbedtls_ecp_point *G,
+                              mbedtls_ecp_point *Xa,
+                              mbedtls_ecp_point *Xb,
+                              const char *id,
+                              const unsigned char *buf,
+                              size_t len )
+{
+    int ret;
+    const unsigned char *p = buf;
+    const unsigned char *end = buf + len;
+
+    /*
+     * struct {
+     *     ECJPAKEKeyKP ecjpake_key_kp_pair_list[2];
+     * } ECJPAKEKeyKPPairList;
+     */
+    MBEDTLS_MPI_CHK( ecjpake_kkp_read( md_info, grp, pf, G, Xa, id, &p, end ) );
+    MBEDTLS_MPI_CHK( ecjpake_kkp_read( md_info, grp, pf, G, Xb, id, &p, end ) );
+
+    if( p != end )
+        ret = MBEDTLS_ERR_ECP_BAD_INPUT_DATA;
+
+cleanup:
+    return( ret );
+}
+
+/*
+ * Generate a ECJPAKEKeyKPPairList
+ * Outputs: the serialized structure, plus two private/public key pairs
+ */
+static int ecjpake_kkpp_write( const mbedtls_md_info_t *md_info,
+                               const mbedtls_ecp_group *grp,
+                               const int pf,
+                               const mbedtls_ecp_point *G,
+                               mbedtls_mpi *xm1,
+                               mbedtls_ecp_point *Xa,
+                               mbedtls_mpi *xm2,
+                               mbedtls_ecp_point *Xb,
+                               const char *id,
+                               unsigned char *buf,
+                               size_t len,
+                               size_t *olen,
+                               int (*f_rng)(void *, unsigned char *, size_t),
+                               void *p_rng )
+{
+    int ret;
+    unsigned char *p = buf;
+    const unsigned char *end = buf + len;
+
+    MBEDTLS_MPI_CHK( ecjpake_kkp_write( md_info, grp, pf, G, xm1, Xa, id,
+                &p, end, f_rng, p_rng ) );
+    MBEDTLS_MPI_CHK( ecjpake_kkp_write( md_info, grp, pf, G, xm2, Xb, id,
+                &p, end, f_rng, p_rng ) );
+
+    *olen = p - buf;
+
+cleanup:
+    return( ret );
+}
+
+/*
+ * Read and process the first round message
+ */
+int mbedtls_ecjpake_read_round_one( mbedtls_ecjpake_context *ctx,
+                                    const unsigned char *buf,
+                                    size_t len )
+{
+    return( ecjpake_kkpp_read( ctx->md_info, &ctx->grp, ctx->point_format,
+                               &ctx->grp.G,
+                               &ctx->Xp1, &ctx->Xp2, ID_PEER,
+                               buf, len ) );
+}
+
+/*
+ * Generate and write the first round message
+ */
+int mbedtls_ecjpake_write_round_one( mbedtls_ecjpake_context *ctx,
+                            unsigned char *buf, size_t len, size_t *olen,
+                            int (*f_rng)(void *, unsigned char *, size_t),
+                            void *p_rng )
+{
+    return( ecjpake_kkpp_write( ctx->md_info, &ctx->grp, ctx->point_format,
+                                &ctx->grp.G,
+                                &ctx->xm1, &ctx->Xm1, &ctx->xm2, &ctx->Xm2,
+                                ID_MINE, buf, len, olen, f_rng, p_rng ) );
+}
+
+/*
+ * Compute the sum of three points R = A + B + C
+ */
+static int ecjpake_ecp_add3( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
+                             const mbedtls_ecp_point *A,
+                             const mbedtls_ecp_point *B,
+                             const mbedtls_ecp_point *C )
+{
+    int ret;
+    mbedtls_mpi one;
+
+    mbedtls_mpi_init( &one );
+
+    MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &one, 1 ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_muladd( grp, R, &one, A, &one, B ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_muladd( grp, R, &one, R, &one, C ) );
+
+cleanup:
+    mbedtls_mpi_free( &one );
+
+    return( ret );
+}
+
+/*
+ * Read and process second round message (C: 7.4.2.5, S: 7.4.2.6)
+ */
+int mbedtls_ecjpake_read_round_two( mbedtls_ecjpake_context *ctx,
+                                            const unsigned char *buf,
+                                            size_t len )
+{
+    int ret;
+    const unsigned char *p = buf;
+    const unsigned char *end = buf + len;
+    mbedtls_ecp_group grp;
+    mbedtls_ecp_point G;    /* C: GB, S: GA */
+
+    mbedtls_ecp_group_init( &grp );
+    mbedtls_ecp_point_init( &G );
+
+    /*
+     * Server: GA = X3  + X4  + X1      (7.4.2.6.1)
+     * Client: GB = X1  + X2  + X3      (7.4.2.5.1)
+     * Unified: G = Xm1 + Xm2 + Xp1
+     * We need that before parsing in order to check Xp as we read it
+     */
+    MBEDTLS_MPI_CHK( ecjpake_ecp_add3( &ctx->grp, &G,
+                                       &ctx->Xm1, &ctx->Xm2, &ctx->Xp1 ) );
+
+    /*
+     * struct {
+     *     ECParameters curve_params;   // only client reading server msg
+     *     ECJPAKEKeyKP ecjpake_key_kp;
+     * } Client/ServerECJPAKEParams;
+     */
+    if( ctx->role == MBEDTLS_ECJPAKE_CLIENT )
+    {
+        MBEDTLS_MPI_CHK( mbedtls_ecp_tls_read_group( &grp, &p, len ) );
+        if( grp.id != ctx->grp.id )
+        {
+            ret = MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE;
+            goto cleanup;
+        }
+    }
+
+    MBEDTLS_MPI_CHK( ecjpake_kkp_read( ctx->md_info, &ctx->grp,
+                            ctx->point_format,
+                            &G, &ctx->Xp, ID_PEER, &p, end ) );
+
+    if( p != end )
+    {
+        ret = MBEDTLS_ERR_ECP_BAD_INPUT_DATA;
+        goto cleanup;
+    }
+
+cleanup:
+    mbedtls_ecp_group_free( &grp );
+    mbedtls_ecp_point_free( &G );
+
+    return( ret );
+}
+
+/*
+ * Compute R = +/- X * S mod N, taking care not to leak S
+ */
+static int ecjpake_mul_secret( mbedtls_mpi *R, int sign,
+                               const mbedtls_mpi *X,
+                               const mbedtls_mpi *S,
+                               const mbedtls_mpi *N,
+                               int (*f_rng)(void *, unsigned char *, size_t),
+                               void *p_rng )
+{
+    int ret;
+    mbedtls_mpi b; /* Blinding value, then s + N * blinding */
+
+    mbedtls_mpi_init( &b );
+
+    /* b = s + rnd-128-bit * N */
+    MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( &b, 16, f_rng, p_rng ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &b, &b, N ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( &b, &b, S ) );
+
+    /* R = sign * X * b mod N */
+    MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( R, X, &b ) );
+    R->s *= sign;
+    MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( R, R, N ) );
+
+cleanup:
+    mbedtls_mpi_free( &b );
+
+    return( ret );
+}
+
+/*
+ * Generate and write the second round message (S: 7.4.2.5, C: 7.4.2.6)
+ */
+int mbedtls_ecjpake_write_round_two( mbedtls_ecjpake_context *ctx,
+                            unsigned char *buf, size_t len, size_t *olen,
+                            int (*f_rng)(void *, unsigned char *, size_t),
+                            void *p_rng )
+{
+    int ret;
+    mbedtls_ecp_point G;    /* C: GA, S: GB */
+    mbedtls_ecp_point Xm;   /* C: Xc, S: Xs */
+    mbedtls_mpi xm;         /* C: xc, S: xs */
+    unsigned char *p = buf;
+    const unsigned char *end = buf + len;
+    size_t ec_len;
+
+    mbedtls_ecp_point_init( &G );
+    mbedtls_ecp_point_init( &Xm );
+    mbedtls_mpi_init( &xm );
+
+    /*
+     * First generate private/public key pair (S: 7.4.2.5.1, C: 7.4.2.6.1)
+     *
+     * Client:  GA = X1  + X3  + X4  | xs = x2  * s | Xc = xc * GA
+     * Server:  GB = X3  + X1  + X2  | xs = x4  * s | Xs = xs * GB
+     * Unified: G  = Xm1 + Xp1 + Xp2 | xm = xm2 * s | Xm = xm * G
+     */
+    MBEDTLS_MPI_CHK( ecjpake_ecp_add3( &ctx->grp, &G,
+                                       &ctx->Xp1, &ctx->Xp2, &ctx->Xm1 ) );
+    MBEDTLS_MPI_CHK( ecjpake_mul_secret( &xm, 1, &ctx->xm2, &ctx->s,
+                                         &ctx->grp.N, f_rng, p_rng ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_mul( &ctx->grp, &Xm, &xm, &G, f_rng, p_rng ) );
+
+    /*
+     * Now write things out
+     *
+     * struct {
+     *     ECParameters curve_params;   // only server writing its message
+     *     ECJPAKEKeyKP ecjpake_key_kp;
+     * } Client/ServerECJPAKEParams;
+     */
+    if( ctx->role == MBEDTLS_ECJPAKE_SERVER )
+    {
+        if( end < p )
+        {
+            ret = MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL;
+            goto cleanup;
+        }
+        MBEDTLS_MPI_CHK( mbedtls_ecp_tls_write_group( &ctx->grp, &ec_len,
+                                                      p, end - p ) );
+        p += ec_len;
+    }
+
+    if( end < p )
+    {
+        ret = MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL;
+        goto cleanup;
+    }
+    MBEDTLS_MPI_CHK( mbedtls_ecp_tls_write_point( &ctx->grp, &Xm,
+                     ctx->point_format, &ec_len, p, end - p ) );
+    p += ec_len;
+
+    MBEDTLS_MPI_CHK( ecjpake_zkp_write( ctx->md_info, &ctx->grp,
+                                        ctx->point_format,
+                                        &G, &xm, &Xm, ID_MINE,
+                                        &p, end, f_rng, p_rng ) );
+
+    *olen = p - buf;
+
+cleanup:
+    mbedtls_ecp_point_free( &G );
+    mbedtls_ecp_point_free( &Xm );
+    mbedtls_mpi_free( &xm );
+
+    return( ret );
+}
+
+/*
+ * Derive PMS (7.4.2.7 / 7.4.2.8)
+ */
+int mbedtls_ecjpake_derive_secret( mbedtls_ecjpake_context *ctx,
+                            unsigned char *buf, size_t len, size_t *olen,
+                            int (*f_rng)(void *, unsigned char *, size_t),
+                            void *p_rng )
+{
+    int ret;
+    mbedtls_ecp_point K;
+    mbedtls_mpi m_xm2_s, one;
+    unsigned char kx[MBEDTLS_ECP_MAX_BYTES];
+    size_t x_bytes;
+
+    *olen = mbedtls_md_get_size( ctx->md_info );
+    if( len < *olen )
+        return( MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL );
+
+    mbedtls_ecp_point_init( &K );
+    mbedtls_mpi_init( &m_xm2_s );
+    mbedtls_mpi_init( &one );
+
+    MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &one, 1 ) );
+
+    /*
+     * Client:  K = ( Xs - X4  * x2  * s ) * x2
+     * Server:  K = ( Xc - X2  * x4  * s ) * x4
+     * Unified: K = ( Xp - Xp2 * xm2 * s ) * xm2
+     */
+    MBEDTLS_MPI_CHK( ecjpake_mul_secret( &m_xm2_s, -1, &ctx->xm2, &ctx->s,
+                                         &ctx->grp.N, f_rng, p_rng ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_muladd( &ctx->grp, &K,
+                                         &one, &ctx->Xp,
+                                         &m_xm2_s, &ctx->Xp2 ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_mul( &ctx->grp, &K, &ctx->xm2, &K,
+                                      f_rng, p_rng ) );
+
+    /* PMS = SHA-256( K.X ) */
+    x_bytes = ( ctx->grp.pbits + 7 ) / 8;
+    MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &K.X, kx, x_bytes ) );
+    MBEDTLS_MPI_CHK( mbedtls_md( ctx->md_info, kx, x_bytes, buf ) );
+
+cleanup:
+    mbedtls_ecp_point_free( &K );
+    mbedtls_mpi_free( &m_xm2_s );
+    mbedtls_mpi_free( &one );
+
+    return( ret );
+}
+
+#undef ID_MINE
+#undef ID_PEER
+
+
+#if defined(MBEDTLS_SELF_TEST)
+
+#if defined(MBEDTLS_PLATFORM_C)
+#include "mbedtls/platform.h"
+#else
+#include <stdio.h>
+#define mbedtls_printf     printf
+#endif
+
+#if !defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) || \
+    !defined(MBEDTLS_SHA256_C)
+int mbedtls_ecjpake_self_test( int verbose )
+{
+    (void) verbose;
+    return( 0 );
+}
+#else
+
+static const unsigned char ecjpake_test_password[] = {
+    0x74, 0x68, 0x72, 0x65, 0x61, 0x64, 0x6a, 0x70, 0x61, 0x6b, 0x65, 0x74,
+    0x65, 0x73, 0x74
+};
+
+static const unsigned char ecjpake_test_x1[] = {
+    0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c,
+    0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18,
+    0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, 0x21
+};
+
+static const unsigned char ecjpake_test_x2[] = {
+    0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c,
+    0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
+    0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f, 0x81
+};
+
+static const unsigned char ecjpake_test_x3[] = {
+    0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c,
+    0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
+    0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f, 0x81
+};
+
+static const unsigned char ecjpake_test_x4[] = {
+    0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc,
+    0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8,
+    0xd9, 0xda, 0xdb, 0xdc, 0xdd, 0xde, 0xdf, 0xe1
+};
+
+static const unsigned char ecjpake_test_cli_one[] = {
+    0x41, 0x04, 0xac, 0xcf, 0x01, 0x06, 0xef, 0x85, 0x8f, 0xa2, 0xd9, 0x19,
+    0x33, 0x13, 0x46, 0x80, 0x5a, 0x78, 0xb5, 0x8b, 0xba, 0xd0, 0xb8, 0x44,
+    0xe5, 0xc7, 0x89, 0x28, 0x79, 0x14, 0x61, 0x87, 0xdd, 0x26, 0x66, 0xad,
+    0xa7, 0x81, 0xbb, 0x7f, 0x11, 0x13, 0x72, 0x25, 0x1a, 0x89, 0x10, 0x62,
+    0x1f, 0x63, 0x4d, 0xf1, 0x28, 0xac, 0x48, 0xe3, 0x81, 0xfd, 0x6e, 0xf9,
+    0x06, 0x07, 0x31, 0xf6, 0x94, 0xa4, 0x41, 0x04, 0x1d, 0xd0, 0xbd, 0x5d,
+    0x45, 0x66, 0xc9, 0xbe, 0xd9, 0xce, 0x7d, 0xe7, 0x01, 0xb5, 0xe8, 0x2e,
+    0x08, 0xe8, 0x4b, 0x73, 0x04, 0x66, 0x01, 0x8a, 0xb9, 0x03, 0xc7, 0x9e,
+    0xb9, 0x82, 0x17, 0x22, 0x36, 0xc0, 0xc1, 0x72, 0x8a, 0xe4, 0xbf, 0x73,
+    0x61, 0x0d, 0x34, 0xde, 0x44, 0x24, 0x6e, 0xf3, 0xd9, 0xc0, 0x5a, 0x22,
+    0x36, 0xfb, 0x66, 0xa6, 0x58, 0x3d, 0x74, 0x49, 0x30, 0x8b, 0xab, 0xce,
+    0x20, 0x72, 0xfe, 0x16, 0x66, 0x29, 0x92, 0xe9, 0x23, 0x5c, 0x25, 0x00,
+    0x2f, 0x11, 0xb1, 0x50, 0x87, 0xb8, 0x27, 0x38, 0xe0, 0x3c, 0x94, 0x5b,
+    0xf7, 0xa2, 0x99, 0x5d, 0xda, 0x1e, 0x98, 0x34, 0x58, 0x41, 0x04, 0x7e,
+    0xa6, 0xe3, 0xa4, 0x48, 0x70, 0x37, 0xa9, 0xe0, 0xdb, 0xd7, 0x92, 0x62,
+    0xb2, 0xcc, 0x27, 0x3e, 0x77, 0x99, 0x30, 0xfc, 0x18, 0x40, 0x9a, 0xc5,
+    0x36, 0x1c, 0x5f, 0xe6, 0x69, 0xd7, 0x02, 0xe1, 0x47, 0x79, 0x0a, 0xeb,
+    0x4c, 0xe7, 0xfd, 0x65, 0x75, 0xab, 0x0f, 0x6c, 0x7f, 0xd1, 0xc3, 0x35,
+    0x93, 0x9a, 0xa8, 0x63, 0xba, 0x37, 0xec, 0x91, 0xb7, 0xe3, 0x2b, 0xb0,
+    0x13, 0xbb, 0x2b, 0x41, 0x04, 0xa4, 0x95, 0x58, 0xd3, 0x2e, 0xd1, 0xeb,
+    0xfc, 0x18, 0x16, 0xaf, 0x4f, 0xf0, 0x9b, 0x55, 0xfc, 0xb4, 0xca, 0x47,
+    0xb2, 0xa0, 0x2d, 0x1e, 0x7c, 0xaf, 0x11, 0x79, 0xea, 0x3f, 0xe1, 0x39,
+    0x5b, 0x22, 0xb8, 0x61, 0x96, 0x40, 0x16, 0xfa, 0xba, 0xf7, 0x2c, 0x97,
+    0x56, 0x95, 0xd9, 0x3d, 0x4d, 0xf0, 0xe5, 0x19, 0x7f, 0xe9, 0xf0, 0x40,
+    0x63, 0x4e, 0xd5, 0x97, 0x64, 0x93, 0x77, 0x87, 0xbe, 0x20, 0xbc, 0x4d,
+    0xee, 0xbb, 0xf9, 0xb8, 0xd6, 0x0a, 0x33, 0x5f, 0x04, 0x6c, 0xa3, 0xaa,
+    0x94, 0x1e, 0x45, 0x86, 0x4c, 0x7c, 0xad, 0xef, 0x9c, 0xf7, 0x5b, 0x3d,
+    0x8b, 0x01, 0x0e, 0x44, 0x3e, 0xf0
+};
+
+static const unsigned char ecjpake_test_srv_one[] = {
+    0x41, 0x04, 0x7e, 0xa6, 0xe3, 0xa4, 0x48, 0x70, 0x37, 0xa9, 0xe0, 0xdb,
+    0xd7, 0x92, 0x62, 0xb2, 0xcc, 0x27, 0x3e, 0x77, 0x99, 0x30, 0xfc, 0x18,
+    0x40, 0x9a, 0xc5, 0x36, 0x1c, 0x5f, 0xe6, 0x69, 0xd7, 0x02, 0xe1, 0x47,
+    0x79, 0x0a, 0xeb, 0x4c, 0xe7, 0xfd, 0x65, 0x75, 0xab, 0x0f, 0x6c, 0x7f,
+    0xd1, 0xc3, 0x35, 0x93, 0x9a, 0xa8, 0x63, 0xba, 0x37, 0xec, 0x91, 0xb7,
+    0xe3, 0x2b, 0xb0, 0x13, 0xbb, 0x2b, 0x41, 0x04, 0x09, 0xf8, 0x5b, 0x3d,
+    0x20, 0xeb, 0xd7, 0x88, 0x5c, 0xe4, 0x64, 0xc0, 0x8d, 0x05, 0x6d, 0x64,
+    0x28, 0xfe, 0x4d, 0xd9, 0x28, 0x7a, 0xa3, 0x65, 0xf1, 0x31, 0xf4, 0x36,
+    0x0f, 0xf3, 0x86, 0xd8, 0x46, 0x89, 0x8b, 0xc4, 0xb4, 0x15, 0x83, 0xc2,
+    0xa5, 0x19, 0x7f, 0x65, 0xd7, 0x87, 0x42, 0x74, 0x6c, 0x12, 0xa5, 0xec,
+    0x0a, 0x4f, 0xfe, 0x2f, 0x27, 0x0a, 0x75, 0x0a, 0x1d, 0x8f, 0xb5, 0x16,
+    0x20, 0x93, 0x4d, 0x74, 0xeb, 0x43, 0xe5, 0x4d, 0xf4, 0x24, 0xfd, 0x96,
+    0x30, 0x6c, 0x01, 0x17, 0xbf, 0x13, 0x1a, 0xfa, 0xbf, 0x90, 0xa9, 0xd3,
+    0x3d, 0x11, 0x98, 0xd9, 0x05, 0x19, 0x37, 0x35, 0x14, 0x41, 0x04, 0x19,
+    0x0a, 0x07, 0x70, 0x0f, 0xfa, 0x4b, 0xe6, 0xae, 0x1d, 0x79, 0xee, 0x0f,
+    0x06, 0xae, 0xb5, 0x44, 0xcd, 0x5a, 0xdd, 0xaa, 0xbe, 0xdf, 0x70, 0xf8,
+    0x62, 0x33, 0x21, 0x33, 0x2c, 0x54, 0xf3, 0x55, 0xf0, 0xfb, 0xfe, 0xc7,
+    0x83, 0xed, 0x35, 0x9e, 0x5d, 0x0b, 0xf7, 0x37, 0x7a, 0x0f, 0xc4, 0xea,
+    0x7a, 0xce, 0x47, 0x3c, 0x9c, 0x11, 0x2b, 0x41, 0xcc, 0xd4, 0x1a, 0xc5,
+    0x6a, 0x56, 0x12, 0x41, 0x04, 0x36, 0x0a, 0x1c, 0xea, 0x33, 0xfc, 0xe6,
+    0x41, 0x15, 0x64, 0x58, 0xe0, 0xa4, 0xea, 0xc2, 0x19, 0xe9, 0x68, 0x31,
+    0xe6, 0xae, 0xbc, 0x88, 0xb3, 0xf3, 0x75, 0x2f, 0x93, 0xa0, 0x28, 0x1d,
+    0x1b, 0xf1, 0xfb, 0x10, 0x60, 0x51, 0xdb, 0x96, 0x94, 0xa8, 0xd6, 0xe8,
+    0x62, 0xa5, 0xef, 0x13, 0x24, 0xa3, 0xd9, 0xe2, 0x78, 0x94, 0xf1, 0xee,
+    0x4f, 0x7c, 0x59, 0x19, 0x99, 0x65, 0xa8, 0xdd, 0x4a, 0x20, 0x91, 0x84,
+    0x7d, 0x2d, 0x22, 0xdf, 0x3e, 0xe5, 0x5f, 0xaa, 0x2a, 0x3f, 0xb3, 0x3f,
+    0xd2, 0xd1, 0xe0, 0x55, 0xa0, 0x7a, 0x7c, 0x61, 0xec, 0xfb, 0x8d, 0x80,
+    0xec, 0x00, 0xc2, 0xc9, 0xeb, 0x12
+};
+
+static const unsigned char ecjpake_test_srv_two[] = {
+    0x03, 0x00, 0x17, 0x41, 0x04, 0x0f, 0xb2, 0x2b, 0x1d, 0x5d, 0x11, 0x23,
+    0xe0, 0xef, 0x9f, 0xeb, 0x9d, 0x8a, 0x2e, 0x59, 0x0a, 0x1f, 0x4d, 0x7c,
+    0xed, 0x2c, 0x2b, 0x06, 0x58, 0x6e, 0x8f, 0x2a, 0x16, 0xd4, 0xeb, 0x2f,
+    0xda, 0x43, 0x28, 0xa2, 0x0b, 0x07, 0xd8, 0xfd, 0x66, 0x76, 0x54, 0xca,
+    0x18, 0xc5, 0x4e, 0x32, 0xa3, 0x33, 0xa0, 0x84, 0x54, 0x51, 0xe9, 0x26,
+    0xee, 0x88, 0x04, 0xfd, 0x7a, 0xf0, 0xaa, 0xa7, 0xa6, 0x41, 0x04, 0x55,
+    0x16, 0xea, 0x3e, 0x54, 0xa0, 0xd5, 0xd8, 0xb2, 0xce, 0x78, 0x6b, 0x38,
+    0xd3, 0x83, 0x37, 0x00, 0x29, 0xa5, 0xdb, 0xe4, 0x45, 0x9c, 0x9d, 0xd6,
+    0x01, 0xb4, 0x08, 0xa2, 0x4a, 0xe6, 0x46, 0x5c, 0x8a, 0xc9, 0x05, 0xb9,
+    0xeb, 0x03, 0xb5, 0xd3, 0x69, 0x1c, 0x13, 0x9e, 0xf8, 0x3f, 0x1c, 0xd4,
+    0x20, 0x0f, 0x6c, 0x9c, 0xd4, 0xec, 0x39, 0x22, 0x18, 0xa5, 0x9e, 0xd2,
+    0x43, 0xd3, 0xc8, 0x20, 0xff, 0x72, 0x4a, 0x9a, 0x70, 0xb8, 0x8c, 0xb8,
+    0x6f, 0x20, 0xb4, 0x34, 0xc6, 0x86, 0x5a, 0xa1, 0xcd, 0x79, 0x06, 0xdd,
+    0x7c, 0x9b, 0xce, 0x35, 0x25, 0xf5, 0x08, 0x27, 0x6f, 0x26, 0x83, 0x6c
+};
+
+static const unsigned char ecjpake_test_cli_two[] = {
+    0x41, 0x04, 0x69, 0xd5, 0x4e, 0xe8, 0x5e, 0x90, 0xce, 0x3f, 0x12, 0x46,
+    0x74, 0x2d, 0xe5, 0x07, 0xe9, 0x39, 0xe8, 0x1d, 0x1d, 0xc1, 0xc5, 0xcb,
+    0x98, 0x8b, 0x58, 0xc3, 0x10, 0xc9, 0xfd, 0xd9, 0x52, 0x4d, 0x93, 0x72,
+    0x0b, 0x45, 0x54, 0x1c, 0x83, 0xee, 0x88, 0x41, 0x19, 0x1d, 0xa7, 0xce,
+    0xd8, 0x6e, 0x33, 0x12, 0xd4, 0x36, 0x23, 0xc1, 0xd6, 0x3e, 0x74, 0x98,
+    0x9a, 0xba, 0x4a, 0xff, 0xd1, 0xee, 0x41, 0x04, 0x07, 0x7e, 0x8c, 0x31,
+    0xe2, 0x0e, 0x6b, 0xed, 0xb7, 0x60, 0xc1, 0x35, 0x93, 0xe6, 0x9f, 0x15,
+    0xbe, 0x85, 0xc2, 0x7d, 0x68, 0xcd, 0x09, 0xcc, 0xb8, 0xc4, 0x18, 0x36,
+    0x08, 0x91, 0x7c, 0x5c, 0x3d, 0x40, 0x9f, 0xac, 0x39, 0xfe, 0xfe, 0xe8,
+    0x2f, 0x72, 0x92, 0xd3, 0x6f, 0x0d, 0x23, 0xe0, 0x55, 0x91, 0x3f, 0x45,
+    0xa5, 0x2b, 0x85, 0xdd, 0x8a, 0x20, 0x52, 0xe9, 0xe1, 0x29, 0xbb, 0x4d,
+    0x20, 0x0f, 0x01, 0x1f, 0x19, 0x48, 0x35, 0x35, 0xa6, 0xe8, 0x9a, 0x58,
+    0x0c, 0x9b, 0x00, 0x03, 0xba, 0xf2, 0x14, 0x62, 0xec, 0xe9, 0x1a, 0x82,
+    0xcc, 0x38, 0xdb, 0xdc, 0xae, 0x60, 0xd9, 0xc5, 0x4c
+};
+
+static const unsigned char ecjpake_test_pms[] = {
+    0xf3, 0xd4, 0x7f, 0x59, 0x98, 0x44, 0xdb, 0x92, 0xa5, 0x69, 0xbb, 0xe7,
+    0x98, 0x1e, 0x39, 0xd9, 0x31, 0xfd, 0x74, 0x3b, 0xf2, 0x2e, 0x98, 0xf9,
+    0xb4, 0x38, 0xf7, 0x19, 0xd3, 0xc4, 0xf3, 0x51
+};
+
+/* Load my private keys and generate the correponding public keys */
+static int ecjpake_test_load( mbedtls_ecjpake_context *ctx,
+                              const unsigned char *xm1, size_t len1,
+                              const unsigned char *xm2, size_t len2 )
+{
+    int ret;
+
+    MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &ctx->xm1, xm1, len1 ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &ctx->xm2, xm2, len2 ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_mul( &ctx->grp, &ctx->Xm1, &ctx->xm1,
+                                      &ctx->grp.G, NULL, NULL ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_mul( &ctx->grp, &ctx->Xm2, &ctx->xm2,
+                                      &ctx->grp.G, NULL, NULL ) );
+
+cleanup:
+    return( ret );
+}
+
+/* For tests we don't need a secure RNG;
+ * use the LGC from Numerical Recipes for simplicity */
+static int ecjpake_lgc( void *p, unsigned char *out, size_t len )
+{
+    static uint32_t x = 42;
+    (void) p;
+
+    while( len > 0 )
+    {
+        size_t use_len = len > 4 ? 4 : len;
+        x = 1664525 * x + 1013904223;
+        memcpy( out, &x, use_len );
+        out += use_len;
+        len -= use_len;
+    }
+
+    return( 0 );
+}
+
+#define TEST_ASSERT( x )    \
+    do {                    \
+        if( x )             \
+            ret = 0;        \
+        else                \
+        {                   \
+            ret = 1;        \
+            goto cleanup;   \
+        }                   \
+    } while( 0 )
+
+/*
+ * Checkup routine
+ */
+int mbedtls_ecjpake_self_test( int verbose )
+{
+    int ret;
+    mbedtls_ecjpake_context cli;
+    mbedtls_ecjpake_context srv;
+    unsigned char buf[512], pms[32];
+    size_t len, pmslen;
+
+    mbedtls_ecjpake_init( &cli );
+    mbedtls_ecjpake_init( &srv );
+
+    if( verbose != 0 )
+        mbedtls_printf( "  ECJPAKE test #0 (setup): " );
+
+    TEST_ASSERT( mbedtls_ecjpake_setup( &cli, MBEDTLS_ECJPAKE_CLIENT,
+                    MBEDTLS_MD_SHA256, MBEDTLS_ECP_DP_SECP256R1,
+                    ecjpake_test_password,
+            sizeof( ecjpake_test_password ) ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_setup( &srv, MBEDTLS_ECJPAKE_SERVER,
+                    MBEDTLS_MD_SHA256, MBEDTLS_ECP_DP_SECP256R1,
+                    ecjpake_test_password,
+            sizeof( ecjpake_test_password ) ) == 0 );
+
+    if( verbose != 0 )
+        mbedtls_printf( "passed\n" );
+
+    if( verbose != 0 )
+        mbedtls_printf( "  ECJPAKE test #1 (random handshake): " );
+
+    TEST_ASSERT( mbedtls_ecjpake_write_round_one( &cli,
+                 buf, sizeof( buf ), &len, ecjpake_lgc, NULL ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_read_round_one( &srv, buf, len ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_write_round_one( &srv,
+                 buf, sizeof( buf ), &len, ecjpake_lgc, NULL ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_read_round_one( &cli, buf, len ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_write_round_two( &srv,
+                 buf, sizeof( buf ), &len, ecjpake_lgc, NULL ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_read_round_two( &cli, buf, len ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_derive_secret( &cli,
+                 pms, sizeof( pms ), &pmslen, ecjpake_lgc, NULL ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_write_round_two( &cli,
+                 buf, sizeof( buf ), &len, ecjpake_lgc, NULL ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_read_round_two( &srv, buf, len ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_derive_secret( &srv,
+                 buf, sizeof( buf ), &len, ecjpake_lgc, NULL ) == 0 );
+
+    TEST_ASSERT( len == pmslen );
+    TEST_ASSERT( memcmp( buf, pms, len ) == 0 );
+
+    if( verbose != 0 )
+        mbedtls_printf( "passed\n" );
+
+    if( verbose != 0 )
+        mbedtls_printf( "  ECJPAKE test #2 (reference handshake): " );
+
+    /* Simulate generation of round one */
+    MBEDTLS_MPI_CHK( ecjpake_test_load( &cli,
+                ecjpake_test_x1, sizeof( ecjpake_test_x1 ),
+                ecjpake_test_x2, sizeof( ecjpake_test_x2 ) ) );
+
+    MBEDTLS_MPI_CHK( ecjpake_test_load( &srv,
+                ecjpake_test_x3, sizeof( ecjpake_test_x3 ),
+                ecjpake_test_x4, sizeof( ecjpake_test_x4 ) ) );
+
+    /* Read round one */
+    TEST_ASSERT( mbedtls_ecjpake_read_round_one( &srv,
+                                    ecjpake_test_cli_one,
+                            sizeof( ecjpake_test_cli_one ) ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_read_round_one( &cli,
+                                    ecjpake_test_srv_one,
+                            sizeof( ecjpake_test_srv_one ) ) == 0 );
+
+    /* Skip generation of round two, read round two */
+    TEST_ASSERT( mbedtls_ecjpake_read_round_two( &cli,
+                                    ecjpake_test_srv_two,
+                            sizeof( ecjpake_test_srv_two ) ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_read_round_two( &srv,
+                                    ecjpake_test_cli_two,
+                            sizeof( ecjpake_test_cli_two ) ) == 0 );
+
+    /* Server derives PMS */
+    TEST_ASSERT( mbedtls_ecjpake_derive_secret( &srv,
+                 buf, sizeof( buf ), &len, ecjpake_lgc, NULL ) == 0 );
+
+    TEST_ASSERT( len == sizeof( ecjpake_test_pms ) );
+    TEST_ASSERT( memcmp( buf, ecjpake_test_pms, len ) == 0 );
+
+    memset( buf, 0, len ); /* Avoid interferences with next step */
+
+    /* Client derives PMS */
+    TEST_ASSERT( mbedtls_ecjpake_derive_secret( &cli,
+                 buf, sizeof( buf ), &len, ecjpake_lgc, NULL ) == 0 );
+
+    TEST_ASSERT( len == sizeof( ecjpake_test_pms ) );
+    TEST_ASSERT( memcmp( buf, ecjpake_test_pms, len ) == 0 );
+
+    if( verbose != 0 )
+        mbedtls_printf( "passed\n" );
+
+cleanup:
+    mbedtls_ecjpake_free( &cli );
+    mbedtls_ecjpake_free( &srv );
+
+    if( ret != 0 )
+    {
+        if( verbose != 0 )
+            mbedtls_printf( "failed\n" );
+
+        ret = 1;
+    }
+
+    if( verbose != 0 )
+        mbedtls_printf( "\n" );
+
+    return( ret );
+}
+
+#undef TEST_ASSERT
+
+#endif /* MBEDTLS_ECP_DP_SECP256R1_ENABLED && MBEDTLS_SHA256_C */
+
+#endif /* MBEDTLS_SELF_TEST */
+
+#endif /* MBEDTLS_ECJPAKE_C */
diff --git a/library/ecp.c b/library/ecp.c
index 64a47ab..19bb488 100644
--- a/library/ecp.c
+++ b/library/ecp.c
@@ -404,6 +404,22 @@
 }
 
 /*
+ * Compare two points lazyly
+ */
+int mbedtls_ecp_point_cmp( const mbedtls_ecp_point *P,
+                           const mbedtls_ecp_point *Q )
+{
+    if( mbedtls_mpi_cmp_mpi( &P->X, &Q->X ) == 0 &&
+        mbedtls_mpi_cmp_mpi( &P->Y, &Q->Y ) == 0 &&
+        mbedtls_mpi_cmp_mpi( &P->Z, &Q->Z ) == 0 )
+    {
+        return( 0 );
+    }
+
+    return( MBEDTLS_ERR_ECP_BAD_INPUT_DATA );
+}
+
+/*
  * Import a non-zero point from ASCII strings
  */
 int mbedtls_ecp_point_read_string( mbedtls_ecp_point *P, int radix,
@@ -1668,7 +1684,38 @@
 #endif /* ECP_SHORTWEIERSTRASS */
 
 /*
+ * R = m * P with shortcuts for m == 1 and m == -1
+ * NOT constant-time - ONLY for short Weierstrass!
+ */
+static int mbedtls_ecp_mul_shortcuts( mbedtls_ecp_group *grp,
+                                      mbedtls_ecp_point *R,
+                                      const mbedtls_mpi *m,
+                                      const mbedtls_ecp_point *P )
+{
+    int ret;
+
+    if( mbedtls_mpi_cmp_int( m, 1 ) == 0 )
+    {
+        MBEDTLS_MPI_CHK( mbedtls_ecp_copy( R, P ) );
+    }
+    else if( mbedtls_mpi_cmp_int( m, -1 ) == 0 )
+    {
+        MBEDTLS_MPI_CHK( mbedtls_ecp_copy( R, P ) );
+        if( mbedtls_mpi_cmp_int( &R->Y, 0 ) != 0 )
+            MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &R->Y, &grp->P, &R->Y ) );
+    }
+    else
+    {
+        MBEDTLS_MPI_CHK( mbedtls_ecp_mul( grp, R, m, P, NULL, NULL ) );
+    }
+
+cleanup:
+    return( ret );
+}
+
+/*
  * Linear combination
+ * NOT constant-time
  */
 int mbedtls_ecp_muladd( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
              const mbedtls_mpi *m, const mbedtls_ecp_point *P,
@@ -1682,8 +1729,9 @@
 
     mbedtls_ecp_point_init( &mP );
 
-    MBEDTLS_MPI_CHK( mbedtls_ecp_mul( grp, &mP, m, P, NULL, NULL ) );
-    MBEDTLS_MPI_CHK( mbedtls_ecp_mul( grp, R,   n, Q, NULL, NULL ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_mul_shortcuts( grp, &mP, m, P ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_mul_shortcuts( grp, R,   n, Q ) );
+
     MBEDTLS_MPI_CHK( ecp_add_mixed( grp, R, &mP, R ) );
     MBEDTLS_MPI_CHK( ecp_normalize_jac( grp, R ) );
 
@@ -1762,9 +1810,11 @@
 }
 
 /*
- * Generate a keypair
+ * Generate a keypair with configurable base point
  */
-int mbedtls_ecp_gen_keypair( mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q,
+int mbedtls_ecp_gen_keypair_base( mbedtls_ecp_group *grp,
+                     const mbedtls_ecp_point *G,
+                     mbedtls_mpi *d, mbedtls_ecp_point *Q,
                      int (*f_rng)(void *, unsigned char *, size_t),
                      void *p_rng )
 {
@@ -1836,7 +1886,18 @@
     if( ret != 0 )
         return( ret );
 
-    return( mbedtls_ecp_mul( grp, Q, d, &grp->G, f_rng, p_rng ) );
+    return( mbedtls_ecp_mul( grp, Q, d, G, f_rng, p_rng ) );
+}
+
+/*
+ * Generate key pair, wrapper for conventional base point
+ */
+int mbedtls_ecp_gen_keypair( mbedtls_ecp_group *grp,
+                             mbedtls_mpi *d, mbedtls_ecp_point *Q,
+                             int (*f_rng)(void *, unsigned char *, size_t),
+                             void *p_rng )
+{
+    return( mbedtls_ecp_gen_keypair_base( grp, &grp->G, d, Q, f_rng, p_rng ) );
 }
 
 /*
diff --git a/library/pkparse.c b/library/pkparse.c
index bddcf5d..275429e 100644
--- a/library/pkparse.c
+++ b/library/pkparse.c
@@ -1181,6 +1181,7 @@
         return( ret );
 #endif /* MBEDTLS_PKCS12_C || MBEDTLS_PKCS5_C */
 #else
+    ((void) ret);
     ((void) pwd);
     ((void) pwdlen);
 #endif /* MBEDTLS_PEM_PARSE_C */
diff --git a/library/ssl_ciphersuites.c b/library/ssl_ciphersuites.c
index 8bad7ab..949b9ed 100644
--- a/library/ssl_ciphersuites.c
+++ b/library/ssl_ciphersuites.c
@@ -40,7 +40,7 @@
  *
  * Current rule (except rc4, weak and null which come last):
  * 1. By key exchange:
- *    Forward-secure non-PSK > forward-secure PSK > other non-PSK > other PSK
+ *    Forward-secure non-PSK > forward-secure PSK > ECJPAKE > other non-PSK > other PSK
  * 2. By key length and cipher:
  *    AES-256 > Camellia-256 > AES-128 > Camellia-128 > 3DES
  * 3. By cipher mode when relevant GCM > CCM > CBC > CCM_8
@@ -131,6 +131,9 @@
     MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA,
     MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA,
 
+    /* The ECJPAKE suite */
+    MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8,
+
     /* All AES-256 suites */
     MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384,
     MBEDTLS_TLS_RSA_WITH_AES_256_CCM,
@@ -1510,6 +1513,18 @@
 #endif /* MBEDTLS_ARC4_C */
 #endif /* MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED */
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_AES_C)
+#if defined(MBEDTLS_CCM_C)
+    { MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8, "TLS-ECJPAKE-WITH-AES-128-CCM-8",
+      MBEDTLS_CIPHER_AES_128_CCM, MBEDTLS_MD_SHA256, MBEDTLS_KEY_EXCHANGE_ECJPAKE,
+      MBEDTLS_SSL_MAJOR_VERSION_3, MBEDTLS_SSL_MINOR_VERSION_3,
+      MBEDTLS_SSL_MAJOR_VERSION_3, MBEDTLS_SSL_MINOR_VERSION_3,
+      MBEDTLS_CIPHERSUITE_SHORT_TAG },
+#endif /* MBEDTLS_CCM_C */
+#endif /* MBEDTLS_AES_C */
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
+
 #if defined(MBEDTLS_ENABLE_WEAK_CIPHERSUITES)
 #if defined(MBEDTLS_CIPHER_NULL_CIPHER)
 #if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED)
diff --git a/library/ssl_cli.c b/library/ssl_cli.c
index 32eae0f..5d9af17 100644
--- a/library/ssl_cli.c
+++ b/library/ssl_cli.c
@@ -241,7 +241,8 @@
 #endif /* MBEDTLS_SSL_PROTO_TLS1_2 &&
           MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED */
 
-#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
 static void ssl_write_supported_elliptic_curves_ext( mbedtls_ssl_context *ssl,
                                                      unsigned char *buf,
                                                      size_t *olen )
@@ -336,7 +337,86 @@
 
     *olen = 6;
 }
-#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */
+#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C || 
+          MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
+
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+static void ssl_write_ecjpake_kkpp_ext( mbedtls_ssl_context *ssl,
+                                        unsigned char *buf,
+                                        size_t *olen )
+{
+    int ret;
+    unsigned char *p = buf;
+    const unsigned char *end = ssl->out_msg + MBEDTLS_SSL_MAX_CONTENT_LEN;
+    size_t kkpp_len;
+
+    *olen = 0;
+
+    /* Skip costly extension if we can't use EC J-PAKE anyway */
+    if( mbedtls_ecjpake_check( &ssl->handshake->ecjpake_ctx ) != 0 )
+        return;
+
+    MBEDTLS_SSL_DEBUG_MSG( 3, ( "client hello, adding ecjpake_kkpp extension" ) );
+
+    if( end - p < 4 )
+    {
+        MBEDTLS_SSL_DEBUG_MSG( 1, ( "buffer too small" ) );
+        return;
+    }
+
+    *p++ = (unsigned char)( ( MBEDTLS_TLS_EXT_ECJPAKE_KKPP >> 8 ) & 0xFF );
+    *p++ = (unsigned char)( ( MBEDTLS_TLS_EXT_ECJPAKE_KKPP      ) & 0xFF );
+
+    /*
+     * We may need to send ClientHello multiple times for Hello verification.
+     * We don't want to compute fresh values every time (both for performance
+     * and consistency reasons), so cache the extension content.
+     */
+    if( ssl->handshake->ecjpake_cache == NULL ||
+        ssl->handshake->ecjpake_cache_len == 0 )
+    {
+        MBEDTLS_SSL_DEBUG_MSG( 3, ( "generating new ecjpake parameters" ) );
+
+        ret = mbedtls_ecjpake_write_round_one( &ssl->handshake->ecjpake_ctx,
+                                        p + 2, end - p - 2, &kkpp_len,
+                                        ssl->conf->f_rng, ssl->conf->p_rng );
+        if( ret != 0 )
+        {
+            MBEDTLS_SSL_DEBUG_RET( 1 , "mbedtls_ecjpake_write_round_one", ret );
+            return;
+        }
+
+        ssl->handshake->ecjpake_cache = mbedtls_calloc( 1, kkpp_len );
+        if( ssl->handshake->ecjpake_cache == NULL )
+        {
+            MBEDTLS_SSL_DEBUG_MSG( 1, ( "allocation failed" ) );
+            return;
+        }
+
+        memcpy( ssl->handshake->ecjpake_cache, p + 2, kkpp_len );
+        ssl->handshake->ecjpake_cache_len = kkpp_len;
+    }
+    else
+    {
+        MBEDTLS_SSL_DEBUG_MSG( 3, ( "re-using cached ecjpake parameters" ) );
+
+        kkpp_len = ssl->handshake->ecjpake_cache_len;
+
+        if( (size_t)( end - p - 2 ) < kkpp_len )
+        {
+            MBEDTLS_SSL_DEBUG_MSG( 1, ( "buffer too small" ) );
+            return;
+        }
+
+        memcpy( p + 2, ssl->handshake->ecjpake_cache, kkpp_len );
+    }
+
+    *p++ = (unsigned char)( ( kkpp_len >> 8 ) & 0xFF );
+    *p++ = (unsigned char)( ( kkpp_len      ) & 0xFF );
+
+    *olen = kkpp_len + 4;
+}
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
 #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
 static void ssl_write_max_fragment_length_ext( mbedtls_ssl_context *ssl,
@@ -790,8 +870,14 @@
             continue;
 #endif
 
-        MBEDTLS_SSL_DEBUG_MSG( 3, ( "client hello, add ciphersuite: %2d",
-                       ciphersuites[i] ) );
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+        if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE &&
+            mbedtls_ecjpake_check( &ssl->handshake->ecjpake_ctx ) != 0 )
+            continue;
+#endif
+
+        MBEDTLS_SSL_DEBUG_MSG( 3, ( "client hello, add ciphersuite: %04x",
+                                    ciphersuites[i] ) );
 
         n++;
         *p++ = (unsigned char)( ciphersuites[i] >> 8 );
@@ -881,7 +967,8 @@
     ext_len += olen;
 #endif
 
-#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
     ssl_write_supported_elliptic_curves_ext( ssl, p + 2 + ext_len, &olen );
     ext_len += olen;
 
@@ -889,6 +976,11 @@
     ext_len += olen;
 #endif
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    ssl_write_ecjpake_kkpp_ext( ssl, p + 2 + ext_len, &olen );
+    ext_len += olen;
+#endif
+
 #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
     ssl_write_max_fragment_length_ext( ssl, p + 2 + ext_len, &olen );
     ext_len += olen;
@@ -1096,7 +1188,8 @@
 }
 #endif /* MBEDTLS_SSL_SESSION_TICKETS */
 
-#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
 static int ssl_parse_supported_point_formats_ext( mbedtls_ssl_context *ssl,
                                                   const unsigned char *buf,
                                                   size_t len )
@@ -1117,7 +1210,12 @@
         if( p[0] == MBEDTLS_ECP_PF_UNCOMPRESSED ||
             p[0] == MBEDTLS_ECP_PF_COMPRESSED )
         {
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
             ssl->handshake->ecdh_ctx.point_format = p[0];
+#endif            
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+            ssl->handshake->ecjpake_ctx.point_format = p[0];
+#endif
             MBEDTLS_SSL_DEBUG_MSG( 4, ( "point format selected: %d", p[0] ) );
             return( 0 );
         }
@@ -1129,7 +1227,38 @@
     MBEDTLS_SSL_DEBUG_MSG( 1, ( "no point format in common" ) );
     return( MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO );
 }
-#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */
+#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C || 
+          MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
+
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+static int ssl_parse_ecjpake_kkpp( mbedtls_ssl_context *ssl,
+                                   const unsigned char *buf,
+                                   size_t len )
+{
+    int ret;
+
+    if( ssl->transform_negotiate->ciphersuite_info->key_exchange !=
+        MBEDTLS_KEY_EXCHANGE_ECJPAKE )
+    {
+        MBEDTLS_SSL_DEBUG_MSG( 3, ( "skip ecjpake kkpp extension" ) );
+        return( 0 );
+    }
+
+    /* If we got here, we no longer need our cached extension */
+    mbedtls_free( ssl->handshake->ecjpake_cache );
+    ssl->handshake->ecjpake_cache = NULL;
+    ssl->handshake->ecjpake_cache_len = 0;
+
+    if( ( ret = mbedtls_ecjpake_read_round_one( &ssl->handshake->ecjpake_ctx,
+                                                buf, len ) ) != 0 )
+    {
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_read_round_one", ret );
+        return( ret );
+    }
+
+    return( 0 );
+}
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
 #if defined(MBEDTLS_SSL_ALPN)
 static int ssl_parse_alpn_ext( mbedtls_ssl_context *ssl,
@@ -1479,7 +1608,7 @@
     MBEDTLS_SSL_DEBUG_MSG( 3, ( "%s session has been resumed",
                    ssl->handshake->resume ? "a" : "no" ) );
 
-    MBEDTLS_SSL_DEBUG_MSG( 3, ( "server hello, chosen ciphersuite: %d", i ) );
+    MBEDTLS_SSL_DEBUG_MSG( 3, ( "server hello, chosen ciphersuite: %04x", i ) );
     MBEDTLS_SSL_DEBUG_MSG( 3, ( "server hello, compress alg.: %d", buf[37 + n] ) );
 
     suite_info = mbedtls_ssl_ciphersuite_from_id( ssl->session_negotiate->ciphersuite );
@@ -1494,6 +1623,8 @@
         return( MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO );
     }
 
+    MBEDTLS_SSL_DEBUG_MSG( 3, ( "server hello, chosen ciphersuite: %s", suite_info->name ) );
+
     i = 0;
     while( 1 )
     {
@@ -1617,7 +1748,8 @@
             break;
 #endif /* MBEDTLS_SSL_SESSION_TICKETS */
 
-#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
         case MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS:
             MBEDTLS_SSL_DEBUG_MSG( 3, ( "found supported_point_formats extension" ) );
 
@@ -1628,7 +1760,21 @@
             }
 
             break;
-#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */
+#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C ||
+          MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
+
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+        case MBEDTLS_TLS_EXT_ECJPAKE_KKPP:
+            MBEDTLS_SSL_DEBUG_MSG( 3, ( "found ecjpake_kkpp extension" ) );
+
+            if( ( ret = ssl_parse_ecjpake_kkpp( ssl,
+                            ext + 4, ext_size ) ) != 0 )
+            {
+                return( ret );
+            }
+
+            break;
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
 #if defined(MBEDTLS_SSL_ALPN)
         case MBEDTLS_TLS_EXT_ALPN:
@@ -2147,6 +2293,19 @@
 #endif /* MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED ||
           MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED ||
           MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED */
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
+    {
+        ret = mbedtls_ecjpake_read_round_two( &ssl->handshake->ecjpake_ctx,
+                                              p, end - p );
+        if( ret != 0 )
+        {
+            MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_read_round_two", ret );
+            return( MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE );
+        }
+    }
+    else
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
     {
         MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
         return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
@@ -2351,7 +2510,8 @@
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_RSA_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
-        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK )
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip parse certificate request" ) );
         ssl->state++;
@@ -2375,7 +2535,8 @@
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_RSA_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
-        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK )
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip parse certificate request" ) );
         ssl->state++;
@@ -2756,6 +2917,31 @@
     }
     else
 #endif /* MBEDTLS_KEY_EXCHANGE_RSA_ENABLED */
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
+    {
+        i = 4;
+
+        ret = mbedtls_ecjpake_write_round_two( &ssl->handshake->ecjpake_ctx,
+                ssl->out_msg + i, MBEDTLS_SSL_MAX_CONTENT_LEN - i, &n,
+                ssl->conf->f_rng, ssl->conf->p_rng );
+        if( ret != 0 )
+        {
+            MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_write_round_two", ret );
+            return( ret );
+        }
+
+        ret = mbedtls_ecjpake_derive_secret( &ssl->handshake->ecjpake_ctx,
+                ssl->handshake->premaster, 32, &ssl->handshake->pmslen,
+                ssl->conf->f_rng, ssl->conf->p_rng );
+        if( ret != 0 )
+        {
+            MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_derive_secret", ret );
+            return( ret );
+        }
+    }
+    else
+#endif /* MBEDTLS_KEY_EXCHANGE_RSA_ENABLED */
     {
         ((void) ciphersuite_info);
         MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
@@ -2799,7 +2985,8 @@
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_RSA_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
-        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK )
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip write certificate verify" ) );
         ssl->state++;
@@ -2831,7 +3018,8 @@
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_RSA_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
-        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK )
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip write certificate verify" ) );
         ssl->state++;
diff --git a/library/ssl_srv.c b/library/ssl_srv.c
index 1bda53c..9afd399 100644
--- a/library/ssl_srv.c
+++ b/library/ssl_srv.c
@@ -232,7 +232,8 @@
 #endif /* MBEDTLS_SSL_PROTO_TLS1_2 &&
           MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED */
 
-#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
 static int ssl_parse_supported_elliptic_curves( mbedtls_ssl_context *ssl,
                                                 const unsigned char *buf,
                                                 size_t len )
@@ -305,7 +306,12 @@
         if( p[0] == MBEDTLS_ECP_PF_UNCOMPRESSED ||
             p[0] == MBEDTLS_ECP_PF_COMPRESSED )
         {
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
             ssl->handshake->ecdh_ctx.point_format = p[0];
+#endif
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+            ssl->handshake->ecjpake_ctx.point_format = p[0];
+#endif
             MBEDTLS_SSL_DEBUG_MSG( 4, ( "point format selected: %d", p[0] ) );
             return( 0 );
         }
@@ -316,7 +322,35 @@
 
     return( 0 );
 }
-#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */
+#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C ||
+          MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
+
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+static int ssl_parse_ecjpake_kkpp( mbedtls_ssl_context *ssl,
+                                   const unsigned char *buf,
+                                   size_t len )
+{
+    int ret;
+
+    if( mbedtls_ecjpake_check( &ssl->handshake->ecjpake_ctx ) != 0 )
+    {
+        MBEDTLS_SSL_DEBUG_MSG( 3, ( "skip ecjpake kkpp extension" ) );
+        return( 0 );
+    }
+
+    if( ( ret = mbedtls_ecjpake_read_round_one( &ssl->handshake->ecjpake_ctx,
+                                                buf, len ) ) != 0 )
+    {
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_read_round_one", ret );
+        return( ret );
+    }
+
+    /* Only mark the extension as OK when we're sure it is */
+    ssl->handshake->cli_exts |= MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK;
+
+    return( 0 );
+}
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
 #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
 static int ssl_parse_max_fragment_length_ext( mbedtls_ssl_context *ssl,
@@ -707,6 +741,17 @@
     }
 #endif
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    if( suite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE &&
+        ( ssl->handshake->cli_exts & MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK ) == 0 )
+    {
+        MBEDTLS_SSL_DEBUG_MSG( 3, ( "ciphersuite mismatch: ecjpake "
+                                    "not configured or ext missing" ) );
+        return( 0 );
+    }
+#endif
+
+
 #if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
     if( mbedtls_ssl_ciphersuite_uses_ec( suite_info ) &&
         ( ssl->handshake->curves == NULL ||
@@ -1541,7 +1586,8 @@
 #endif /* MBEDTLS_SSL_PROTO_TLS1_2 &&
           MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED */
 
-#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
         case MBEDTLS_TLS_EXT_SUPPORTED_ELLIPTIC_CURVES:
             MBEDTLS_SSL_DEBUG_MSG( 3, ( "found supported elliptic curves extension" ) );
 
@@ -1558,7 +1604,18 @@
             if( ret != 0 )
                 return( ret );
             break;
-#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */
+#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C ||
+          MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
+
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+        case MBEDTLS_TLS_EXT_ECJPAKE_KKPP:
+            MBEDTLS_SSL_DEBUG_MSG( 3, ( "found ecjpake kkpp extension" ) );
+
+            ret = ssl_parse_ecjpake_kkpp( ssl, ext + 4, ext_size );
+            if( ret != 0 )
+                return( ret );
+            break;
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
 #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
         case MBEDTLS_TLS_EXT_MAX_FRAGMENT_LENGTH:
@@ -1976,7 +2033,8 @@
 }
 #endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
 
-#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
 static void ssl_write_supported_point_formats_ext( mbedtls_ssl_context *ssl,
                                                    unsigned char *buf,
                                                    size_t *olen )
@@ -2004,7 +2062,51 @@
 
     *olen = 6;
 }
-#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */
+#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C || MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
+
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+static void ssl_write_ecjpake_kkpp_ext( mbedtls_ssl_context *ssl,
+                                        unsigned char *buf,
+                                        size_t *olen )
+{
+    int ret;
+    unsigned char *p = buf;
+    const unsigned char *end = ssl->out_msg + MBEDTLS_SSL_MAX_CONTENT_LEN;
+    size_t kkpp_len;
+
+    *olen = 0;
+
+    /* Skip costly computation if not needed */
+    if( ssl->transform_negotiate->ciphersuite_info->key_exchange !=
+        MBEDTLS_KEY_EXCHANGE_ECJPAKE )
+        return;
+
+    MBEDTLS_SSL_DEBUG_MSG( 3, ( "server hello, ecjpake kkpp extension" ) );
+
+    if( end - p < 4 )
+    {
+        MBEDTLS_SSL_DEBUG_MSG( 1, ( "buffer too small" ) );
+        return;
+    }
+
+    *p++ = (unsigned char)( ( MBEDTLS_TLS_EXT_ECJPAKE_KKPP >> 8 ) & 0xFF );
+    *p++ = (unsigned char)( ( MBEDTLS_TLS_EXT_ECJPAKE_KKPP      ) & 0xFF );
+
+    ret = mbedtls_ecjpake_write_round_one( &ssl->handshake->ecjpake_ctx,
+                                        p + 2, end - p - 2, &kkpp_len,
+                                        ssl->conf->f_rng, ssl->conf->p_rng );
+    if( ret != 0 )
+    {
+        MBEDTLS_SSL_DEBUG_RET( 1 , "mbedtls_ecjpake_write_round_one", ret );
+        return;
+    }
+
+    *p++ = (unsigned char)( ( kkpp_len >> 8 ) & 0xFF );
+    *p++ = (unsigned char)( ( kkpp_len      ) & 0xFF );
+
+    *olen = kkpp_len + 4;
+}
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
 #if defined(MBEDTLS_SSL_ALPN )
 static void ssl_write_alpn_ext( mbedtls_ssl_context *ssl,
@@ -2290,11 +2392,17 @@
     ext_len += olen;
 #endif
 
-#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
+#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
     ssl_write_supported_point_formats_ext( ssl, p + 2 + ext_len, &olen );
     ext_len += olen;
 #endif
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    ssl_write_ecjpake_kkpp_ext( ssl, p + 2 + ext_len, &olen );
+    ext_len += olen;
+#endif
+
 #if defined(MBEDTLS_SSL_ALPN)
     ssl_write_alpn_ext( ssl, p + 2 + ext_len, &olen );
     ext_len += olen;
@@ -2333,7 +2441,8 @@
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_RSA_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
-        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK )
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip write certificate request" ) );
         ssl->state++;
@@ -2370,6 +2479,7 @@
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_RSA_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE ||
         authmode == MBEDTLS_SSL_VERIFY_NONE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip write certificate request" ) );
@@ -2544,12 +2654,14 @@
     defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) ||                       \
     defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) ||                     \
     defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED) ||                     \
-    defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED)
+    defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) ||                   \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
     unsigned char *p = ssl->out_msg + 4;
     unsigned char *dig_signed = p;
     size_t dig_signed_len = 0, len;
     ((void) dig_signed);
     ((void) dig_signed_len);
+    ((void) len);
 #endif
 
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write server key exchange" ) );
@@ -2580,6 +2692,25 @@
     }
 #endif
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
+    {
+        size_t jlen;
+        const unsigned char *end = ssl->out_msg + MBEDTLS_SSL_MAX_CONTENT_LEN;
+
+        ret = mbedtls_ecjpake_write_round_two( &ssl->handshake->ecjpake_ctx,
+                p, end - p, &jlen, ssl->conf->f_rng, ssl->conf->p_rng );
+        if( ret != 0 )
+        {
+            MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_write_round_two", ret );
+            return( ret );
+        }
+
+        p += jlen;
+        n += jlen;
+    }
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
+
 #if defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) ||                       \
     defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED)
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
@@ -3331,6 +3462,28 @@
     }
     else
 #endif /* MBEDTLS_KEY_EXCHANGE_RSA_ENABLED */
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
+    {
+        ret = mbedtls_ecjpake_read_round_two( &ssl->handshake->ecjpake_ctx,
+                                              p, end - p );
+        if( ret != 0 )
+        {
+            MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_read_round_two", ret );
+            return( MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE );
+        }
+
+        ret = mbedtls_ecjpake_derive_secret( &ssl->handshake->ecjpake_ctx,
+                ssl->handshake->premaster, 32, &ssl->handshake->pmslen,
+                ssl->conf->f_rng, ssl->conf->p_rng );
+        if( ret != 0 )
+        {
+            MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_derive_secret", ret );
+            return( ret );
+        }
+    }
+    else
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
     {
         MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
         return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
@@ -3362,7 +3515,8 @@
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_RSA_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
-        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK )
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip parse certificate verify" ) );
         ssl->state++;
@@ -3392,6 +3546,7 @@
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_RSA_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE ||
         ssl->session_negotiate->peer_cert == NULL )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip parse certificate verify" ) );
diff --git a/library/ssl_tls.c b/library/ssl_tls.c
index 90e48d3..e254b2b 100644
--- a/library/ssl_tls.c
+++ b/library/ssl_tls.c
@@ -862,6 +862,16 @@
     }
 #endif /* MBEDTLS_SSL_HW_RECORD_ACCEL */
 
+#if defined(MBEDTLS_SSL_EXPORT_KEYS)
+    if( ssl->conf->f_export_keys != NULL )
+    {
+        ssl->conf->f_export_keys( ssl->conf->p_export_keys,
+                                  session->master, keyblk,
+                                  transform->maclen, transform->keylen,
+                                  iv_copy_len );
+    }
+#endif
+
     if( ( ret = mbedtls_cipher_setup( &transform->cipher_ctx_enc,
                                  cipher_info ) ) != 0 )
     {
@@ -3992,7 +4002,8 @@
 
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
-        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK )
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip write certificate" ) );
         ssl->state++;
@@ -4011,7 +4022,8 @@
 
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
-        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK )
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip parse certificate" ) );
         ssl->state++;
@@ -4033,7 +4045,8 @@
 
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
-        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK )
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip write certificate" ) );
         ssl->state++;
@@ -4148,7 +4161,8 @@
 
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_PSK ||
         ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_DHE_PSK ||
-        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK )
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK ||
+        ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip parse certificate" ) );
         ssl->state++;
@@ -5170,6 +5184,13 @@
 #if defined(MBEDTLS_ECDH_C)
     mbedtls_ecdh_init( &handshake->ecdh_ctx );
 #endif
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    mbedtls_ecjpake_init( &handshake->ecjpake_ctx );
+#if defined(MBEDTLS_SSL_CLI_C)
+    handshake->ecjpake_cache = NULL;
+    handshake->ecjpake_cache_len = 0;
+#endif
+#endif
 
 #if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
     handshake->sni_authmode = MBEDTLS_SSL_VERIFY_UNSET;
@@ -5703,6 +5724,32 @@
 }
 #endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+/*
+ * Set EC J-PAKE password for current handshake
+ */
+int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl,
+                                         const unsigned char *pw,
+                                         size_t pw_len )
+{
+    mbedtls_ecjpake_role role;
+
+    if( ssl->handshake == NULL && ssl->conf == NULL )
+        return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
+
+    if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
+        role = MBEDTLS_ECJPAKE_SERVER;
+    else
+        role = MBEDTLS_ECJPAKE_CLIENT;
+
+    return( mbedtls_ecjpake_setup( &ssl->handshake->ecjpake_ctx,
+                                   role,
+                                   MBEDTLS_MD_SHA256,
+                                   MBEDTLS_ECP_DP_SECP256R1,
+                                   pw, pw_len ) );
+}
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
+
 #if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
 int mbedtls_ssl_conf_psk( mbedtls_ssl_config *conf,
                 const unsigned char *psk, size_t psk_len,
@@ -6026,6 +6073,16 @@
 #endif
 #endif /* MBEDTLS_SSL_SESSION_TICKETS */
 
+#if defined(MBEDTLS_SSL_EXPORT_KEYS)
+void mbedtls_ssl_conf_export_keys_cb( mbedtls_ssl_config *conf,
+        mbedtls_ssl_export_keys_t *f_export_keys,
+        void *p_export_keys )
+{
+    conf->f_export_keys = f_export_keys;
+    conf->p_export_keys = p_export_keys;
+}
+#endif
+
 /*
  * SSL get accessors
  */
@@ -6846,6 +6903,14 @@
 #if defined(MBEDTLS_ECDH_C)
     mbedtls_ecdh_free( &handshake->ecdh_ctx );
 #endif
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    mbedtls_ecjpake_free( &handshake->ecjpake_ctx );
+#if defined(MBEDTLS_SSL_CLI_C)
+    mbedtls_free( handshake->ecjpake_cache );
+    handshake->ecjpake_cache = NULL;
+    handshake->ecjpake_cache_len = 0;
+#endif
+#endif
 
 #if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
     /* explicit void pointer cast for buggy MS compiler */
@@ -7195,7 +7260,8 @@
     mbedtls_zeroize( conf, sizeof( mbedtls_ssl_config ) );
 }
 
-#if defined(MBEDTLS_PK_C)
+#if defined(MBEDTLS_PK_C) && \
+    ( defined(MBEDTLS_RSA_C) || defined(MBEDTLS_ECDSA_C) )
 /*
  * Convert between MBEDTLS_PK_XXX and SSL_SIG_XXX
  */
@@ -7228,7 +7294,7 @@
             return( MBEDTLS_PK_NONE );
     }
 }
-#endif /* MBEDTLS_PK_C */
+#endif /* MBEDTLS_PK_C && ( MBEDTLS_RSA_C || MBEDTLS_ECDSA_C ) */
 
 /*
  * Convert from MBEDTLS_SSL_HASH_XXX to MBEDTLS_MD_XXX
@@ -7384,6 +7450,7 @@
             case MBEDTLS_KEY_EXCHANGE_PSK:
             case MBEDTLS_KEY_EXCHANGE_DHE_PSK:
             case MBEDTLS_KEY_EXCHANGE_ECDHE_PSK:
+            case MBEDTLS_KEY_EXCHANGE_ECJPAKE:
                 usage = 0;
         }
     }
diff --git a/library/version_features.c b/library/version_features.c
index 196b93c..1575e09 100644
--- a/library/version_features.c
+++ b/library/version_features.c
@@ -264,6 +264,9 @@
 #if defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED)
     "MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED",
 #endif /* MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED */
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    "MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED",
+#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 #if defined(MBEDTLS_PK_PARSE_EC_EXTENDED)
     "MBEDTLS_PK_PARSE_EC_EXTENDED",
 #endif /* MBEDTLS_PK_PARSE_EC_EXTENDED */
@@ -378,6 +381,9 @@
 #if defined(MBEDTLS_SSL_SESSION_TICKETS)
     "MBEDTLS_SSL_SESSION_TICKETS",
 #endif /* MBEDTLS_SSL_SESSION_TICKETS */
+#if defined(MBEDTLS_SSL_EXPORT_KEYS)
+    "MBEDTLS_SSL_EXPORT_KEYS",
+#endif /* MBEDTLS_SSL_EXPORT_KEYS */
 #if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
     "MBEDTLS_SSL_SERVER_NAME_INDICATION",
 #endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */
@@ -465,6 +471,9 @@
 #if defined(MBEDTLS_ECDSA_C)
     "MBEDTLS_ECDSA_C",
 #endif /* MBEDTLS_ECDSA_C */
+#if defined(MBEDTLS_ECJPAKE_C)
+    "MBEDTLS_ECJPAKE_C",
+#endif /* MBEDTLS_ECJPAKE_C */
 #if defined(MBEDTLS_ECP_C)
     "MBEDTLS_ECP_C",
 #endif /* MBEDTLS_ECP_C */
diff --git a/library/x509_crt.c b/library/x509_crt.c
index f6879dd..14e5d94 100644
--- a/library/x509_crt.c
+++ b/library/x509_crt.c
@@ -186,8 +186,10 @@
     }
 #endif
 
-#if defined(MBEDTLS_ECDSA_C)
-    if( pk_alg == MBEDTLS_PK_ECDSA )
+#if defined(MBEDTLS_ECP_C)
+    if( pk_alg == MBEDTLS_PK_ECDSA ||
+        pk_alg == MBEDTLS_PK_ECKEY ||
+        pk_alg == MBEDTLS_PK_ECKEY_DH )
     {
         mbedtls_ecp_group_id gid = mbedtls_pk_ec( *pk )->grp.id;
 
@@ -2151,6 +2153,7 @@
     mbedtls_x509_crt *parent;
     mbedtls_x509_name *name;
     mbedtls_x509_sequence *cur = NULL;
+    mbedtls_pk_type_t pk_type;
 
     if( profile == NULL )
         return( MBEDTLS_ERR_X509_BAD_INPUT_DATA );
@@ -2209,6 +2212,15 @@
         }
     }
 
+    /* Check the type and size of the key */
+    pk_type = mbedtls_pk_get_type( &crt->pk );
+
+    if( x509_profile_check_pk_alg( profile, pk_type ) != 0 )
+        *flags |= MBEDTLS_X509_BADCERT_BAD_PK;
+
+    if( x509_profile_check_key( profile, pk_type, &crt->pk ) != 0 )
+        *flags |= MBEDTLS_X509_BADCERT_BAD_KEY;
+
     /* Look for a parent in trusted CAs */
     for( parent = trust_ca; parent != NULL; parent = parent->next )
     {
diff --git a/programs/ssl/ssl_client2.c b/programs/ssl/ssl_client2.c
index c090db9..559e502 100644
--- a/programs/ssl/ssl_client2.c
+++ b/programs/ssl/ssl_client2.c
@@ -75,6 +75,7 @@
 #define DFL_KEY_FILE            ""
 #define DFL_PSK                 ""
 #define DFL_PSK_IDENTITY        "Client_identity"
+#define DFL_ECJPAKE_PW          NULL
 #define DFL_FORCE_CIPHER        0
 #define DFL_RENEGOTIATION       MBEDTLS_SSL_RENEGOTIATION_DISABLED
 #define DFL_ALLOW_LEGACY        -2
@@ -211,6 +212,13 @@
 #define USAGE_RENEGO ""
 #endif
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#define USAGE_ECJPAKE \
+    "    ecjpake_pw=%%s       default: none (disabled)\n"
+#else
+#define USAGE_ECJPAKE ""
+#endif
+
 #define USAGE \
     "\n usage: ssl_client2 param=<>...\n"                   \
     "\n acceptable parameters:\n"                           \
@@ -233,6 +241,7 @@
     USAGE_IO                                                \
     "\n"                                                    \
     USAGE_PSK                                               \
+    USAGE_ECJPAKE                                           \
     "\n"                                                    \
     "    allow_legacy=%%d     default: (library default: no)\n"      \
     USAGE_RENEGO                                            \
@@ -279,6 +288,7 @@
     const char *key_file;       /* the file with the client key             */
     const char *psk;            /* the pre-shared key                       */
     const char *psk_identity;   /* the pre-shared key identity              */
+    const char *ecjpake_pw;     /* the EC J-PAKE password                   */
     int force_ciphersuite[2];   /* protocol/ciphersuite to use, or all      */
     int renegotiation;          /* enable / disable renegotiation           */
     int allow_legacy;           /* allow legacy renegotiation               */
@@ -469,6 +479,7 @@
     opt.key_file            = DFL_KEY_FILE;
     opt.psk                 = DFL_PSK;
     opt.psk_identity        = DFL_PSK_IDENTITY;
+    opt.ecjpake_pw          = DFL_ECJPAKE_PW;
     opt.force_ciphersuite[0]= DFL_FORCE_CIPHER;
     opt.renegotiation       = DFL_RENEGOTIATION;
     opt.allow_legacy        = DFL_ALLOW_LEGACY;
@@ -557,6 +568,8 @@
             opt.psk = q;
         else if( strcmp( p, "psk_identity" ) == 0 )
             opt.psk_identity = q;
+        else if( strcmp( p, "ecjpake_pw" ) == 0 )
+            opt.ecjpake_pw = q;
         else if( strcmp( p, "force_ciphersuite" ) == 0 )
         {
             opt.force_ciphersuite[0] = mbedtls_ssl_get_ciphersuite_id( q );
@@ -1204,6 +1217,19 @@
     }
 #endif
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    if( opt.ecjpake_pw != DFL_ECJPAKE_PW )
+    {
+        if( ( ret = mbedtls_ssl_set_hs_ecjpake_password( &ssl,
+                        (const unsigned char *) opt.ecjpake_pw,
+                                        strlen( opt.ecjpake_pw ) ) ) != 0 )
+        {
+            mbedtls_printf( " failed\n  ! mbedtls_ssl_set_hs_ecjpake_password returned %d\n\n", ret );
+            goto exit;
+        }
+    }
+#endif
+
     if( opt.nbio == 2 )
         mbedtls_ssl_set_bio( &ssl, &server_fd, my_send, my_recv, NULL );
     else
diff --git a/programs/ssl/ssl_server2.c b/programs/ssl/ssl_server2.c
index bd4d1d1..b586a70 100644
--- a/programs/ssl/ssl_server2.c
+++ b/programs/ssl/ssl_server2.c
@@ -102,6 +102,7 @@
 #define DFL_KEY_FILE2           ""
 #define DFL_PSK                 ""
 #define DFL_PSK_IDENTITY        "Client_identity"
+#define DFL_ECJPAKE_PW          NULL
 #define DFL_PSK_LIST            NULL
 #define DFL_FORCE_CIPHER        0
 #define DFL_VERSION_SUITES      NULL
@@ -293,6 +294,13 @@
 #define USAGE_RENEGO ""
 #endif
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#define USAGE_ECJPAKE \
+    "    ecjpake_pw=%%s       default: none (disabled)\n"
+#else
+#define USAGE_ECJPAKE ""
+#endif
+
 #define USAGE \
     "\n usage: ssl_server2 param=<>...\n"                   \
     "\n acceptable parameters:\n"                           \
@@ -314,6 +322,7 @@
     USAGE_SNI                                               \
     "\n"                                                    \
     USAGE_PSK                                               \
+    USAGE_ECJPAKE                                           \
     "\n"                                                    \
     "    allow_legacy=%%d     default: (library default: no)\n"      \
     USAGE_RENEGO                                            \
@@ -358,6 +367,7 @@
     const char *psk;            /* the pre-shared key                       */
     const char *psk_identity;   /* the pre-shared key identity              */
     char *psk_list;             /* list of PSK id/key pairs for callback    */
+    const char *ecjpake_pw;     /* the EC J-PAKE password                   */
     int force_ciphersuite[2];   /* protocol/ciphersuite to use, or all      */
     const char *version_suites; /* per-version ciphersuites                 */
     int renegotiation;          /* enable / disable renegotiation           */
@@ -900,6 +910,7 @@
     opt.psk                 = DFL_PSK;
     opt.psk_identity        = DFL_PSK_IDENTITY;
     opt.psk_list            = DFL_PSK_LIST;
+    opt.ecjpake_pw          = DFL_ECJPAKE_PW;
     opt.force_ciphersuite[0]= DFL_FORCE_CIPHER;
     opt.version_suites      = DFL_VERSION_SUITES;
     opt.renegotiation       = DFL_RENEGOTIATION;
@@ -985,6 +996,8 @@
             opt.psk_identity = q;
         else if( strcmp( p, "psk_list" ) == 0 )
             opt.psk_list = q;
+        else if( strcmp( p, "ecjpake_pw" ) == 0 )
+            opt.ecjpake_pw = q;
         else if( strcmp( p, "force_ciphersuite" ) == 0 )
         {
             opt.force_ciphersuite[0] = mbedtls_ssl_get_ciphersuite_id( q );
@@ -1904,6 +1917,19 @@
     }
 #endif /* MBEDTLS_SSL_DTLS_HELLO_VERIFY */
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+    if( opt.ecjpake_pw != DFL_ECJPAKE_PW )
+    {
+        if( ( ret = mbedtls_ssl_set_hs_ecjpake_password( &ssl,
+                        (const unsigned char *) opt.ecjpake_pw,
+                                        strlen( opt.ecjpake_pw ) ) ) != 0 )
+        {
+            mbedtls_printf( " failed\n  ! mbedtls_ssl_set_hs_ecjpake_password returned %d\n\n", ret );
+            goto exit;
+        }
+    }
+#endif
+
     mbedtls_printf( " ok\n" );
 
     /*
diff --git a/programs/test/selftest.c b/programs/test/selftest.c
index 82e9581..fe5d514 100644
--- a/programs/test/selftest.c
+++ b/programs/test/selftest.c
@@ -49,6 +49,7 @@
 #include "mbedtls/xtea.h"
 #include "mbedtls/pkcs5.h"
 #include "mbedtls/ecp.h"
+#include "mbedtls/ecjpake.h"
 #include "mbedtls/timing.h"
 
 #include <stdio.h>
@@ -244,6 +245,11 @@
         return( ret );
 #endif
 
+#if defined(MBEDTLS_ECJPAKE_C)
+    if( ( ret = mbedtls_ecjpake_self_test( v ) ) != 0 )
+        return( ret );
+#endif
+
 #if defined(MBEDTLS_DHM_C)
     if( ( ret = mbedtls_dhm_self_test( v ) ) != 0 )
         return( ret );
diff --git a/scripts/footprint.sh b/scripts/footprint.sh
new file mode 100755
index 0000000..a11844f
--- /dev/null
+++ b/scripts/footprint.sh
@@ -0,0 +1,52 @@
+#!/bin/sh
+
+set -eu
+
+CONFIG_H='include/mbedtls/config.h'
+
+if [ -r $CONFIG_H ]; then :; else
+    echo "$CONFIG_H not found" >&2
+    exit 1
+fi
+
+if grep -i cmake Makefile >/dev/null; then
+    echo "Not compatible with CMake" >&2
+    exit 1
+fi
+
+doit()
+{
+    NAME="$1"
+    FILE="$2"
+
+    echo "$NAME:"
+
+    cp $CONFIG_H ${CONFIG_H}.bak
+    cp "$FILE" include/mbedtls/config.h
+
+    {
+        scripts/config.pl unset MBEDTLS_NET_C || true
+        scripts/config.pl unset MBEDTLS_TIMING_C || true
+        scripts/config.pl unset MBEDTLS_FS_IO || true
+    } >/dev/null 2>&1
+
+    CC=arm-none-eabi-gcc AR=arm-none-eabi-ar LD=arm-none-eabi-ld \
+        CFLAGS='-Wa,--noexecstack -Os -march=armv7-m -mthumb' \
+        make clean lib >/dev/null
+
+    OUT="size-${NAME}.txt"
+    arm-none-eabi-size -t library/libmbed*.a > "$OUT"
+    head -n1 "$OUT"
+    tail -n1 "$OUT"
+
+    cp ${CONFIG_H}.bak $CONFIG_H
+}
+
+# creates the yotta config
+yotta/create-module.sh >/dev/null
+
+doit default    include/mbedtls/config.h.bak
+doit yotta      yotta/module/mbedtls/config.h
+doit thread     configs/config-thread.h
+doit ecc        configs/config-suite-b.h
+doit psk        configs/config-ccm-psk-tls1_2.h
diff --git a/tests/CMakeLists.txt b/tests/CMakeLists.txt
index 864ea77..1cca818 100644
--- a/tests/CMakeLists.txt
+++ b/tests/CMakeLists.txt
@@ -60,9 +60,10 @@
 add_test_suite(debug)
 add_test_suite(des)
 add_test_suite(dhm)
-add_test_suite(ecp)
 add_test_suite(ecdh)
 add_test_suite(ecdsa)
+add_test_suite(ecjpake)
+add_test_suite(ecp)
 add_test_suite(entropy)
 add_test_suite(error)
 add_test_suite(gcm gcm.aes128_en)
diff --git a/tests/Makefile b/tests/Makefile
index e97887a..c5172e4 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -60,7 +60,7 @@
 	test_suite_ctr_drbg$(EXEXT)	test_suite_debug$(EXEXT)	\
 	test_suite_des$(EXEXT)		test_suite_dhm$(EXEXT)		\
 	test_suite_ecdh$(EXEXT)		test_suite_ecdsa$(EXEXT)	\
-	test_suite_ecp$(EXEXT)						\
+	test_suite_ecjpake$(EXEXT)	test_suite_ecp$(EXEXT)		\
 	test_suite_error$(EXEXT)	test_suite_entropy$(EXEXT)	\
 	test_suite_gcm.aes128_de$(EXEXT)				\
 	test_suite_gcm.aes192_de$(EXEXT)				\
@@ -292,6 +292,10 @@
 	echo "  CC    $<"
 	$(CC) $(LOCAL_CFLAGS) $(CFLAGS) $<	$(LOCAL_LDFLAGS) $(LDFLAGS) -o $@
 
+test_suite_ecjpake$(EXEXT): test_suite_ecjpake.c $(DEP)
+	echo "  CC    $<"
+	$(CC) $(LOCAL_CFLAGS) $(CFLAGS) $<	$(LOCAL_LDFLAGS) $(LDFLAGS) -o $@
+
 test_suite_ecp$(EXEXT): test_suite_ecp.c $(DEP)
 	echo "  CC    $<"
 	$(CC) $(LOCAL_CFLAGS) $(CFLAGS) $<	$(LOCAL_LDFLAGS) $(LDFLAGS) -o $@
diff --git a/tests/scripts/curves.pl b/tests/scripts/curves.pl
index 545b3b7..654bc5c 100755
--- a/tests/scripts/curves.pl
+++ b/tests/scripts/curves.pl
@@ -23,6 +23,8 @@
 
 for my $curve (@curves) {
     system( "cp $config_h.bak $config_h" ) and die "$config_h not restored\n";
+    # depends on a specific curve. Also, ignore error if it wasn't enabled
+    system( "scripts/config.pl unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED" );
     system( "make clean" ) and die;
 
     print "\n******************************************\n";
@@ -32,7 +34,7 @@
     system( "scripts/config.pl unset $curve" )
         and abort "Failed to disable $curve\n";
 
-    system( "make mbedtls" ) and abort "Failed to build lib: $curve\n";
+    system( "make lib" ) and abort "Failed to build lib: $curve\n";
     system( "cd tests && make" ) and abort "Failed to build tests: $curve\n";
     system( "make test" ) and abort "Failed test suite: $curve\n";
 
diff --git a/tests/scripts/test-ref-configs.pl b/tests/scripts/test-ref-configs.pl
index d1cc924..b27d64c 100755
--- a/tests/scripts/test-ref-configs.pl
+++ b/tests/scripts/test-ref-configs.pl
@@ -11,14 +11,20 @@
 use strict;
 
 my %configs = (
-    'config-mini-tls1_1.h'
-        => '-m tls1_1 -f \'^DES-CBC3-SHA$\|^TLS-RSA-WITH-3DES-EDE-CBC-SHA$\'',
-    'config-suite-b.h'
-        => "-m tls1_2 -f 'ECDHE-ECDSA.*AES.*GCM' -p mbedTLS",
-    'config-picocoin.h'
-        => 0,
-    'config-ccm-psk-tls1_2.h'
-        => '-m tls1_2 -f \'^TLS-PSK-WITH-AES-...-CCM-8\'',
+    'config-mini-tls1_1.h' => {
+        'compat' => '-m tls1_1 -f \'^DES-CBC3-SHA$\|^TLS-RSA-WITH-3DES-EDE-CBC-SHA$\'',
+    },
+    'config-suite-b.h' => {
+        'compat' => "-m tls1_2 -f 'ECDHE-ECDSA.*AES.*GCM' -p mbedTLS",
+    },
+    'config-picocoin.h' => {
+    },
+    'config-ccm-psk-tls1_2.h' => {
+        'compat' => '-m tls1_2 -f \'^TLS-PSK-WITH-AES-...-CCM-8\'',
+    },
+    'config-thread.h' => {
+        'opt' => '-f ECJPAKE.*nolog',
+    },
 );
 
 # If no config-name is provided, use all known configs.
@@ -46,7 +52,7 @@
     die $_[0];
 }
 
-while( my ($conf, $args) = each %configs ) {
+while( my ($conf, $data) = each %configs ) {
     system( "cp $config_h.bak $config_h" ) and die;
     system( "make clean" ) and die;
 
@@ -60,16 +66,29 @@
     system( "make" ) and abort "Failed to build: $conf\n";
     system( "make test" ) and abort "Failed test suite: $conf\n";
 
-    if( $args )
+    my $compat = $data->{'compat'};
+    if( $compat )
     {
-        print "\nrunning compat.sh $args\n";
-        system( "tests/compat.sh $args" )
+        print "\nrunning compat.sh $compat\n";
+        system( "tests/compat.sh $compat" )
             and abort "Failed compat.sh: $conf\n";
     }
     else
     {
         print "\nskipping compat.sh\n";
     }
+
+    my $opt = $data->{'opt'};
+    if( $opt )
+    {
+        print "\nrunning ssl-opt.sh $opt\n";
+        system( "tests/ssl-opt.sh $opt" )
+            and abort "Failed ssl-opt.sh: $conf\n";
+    }
+    else
+    {
+        print "\nskipping ssl-opt.sh\n";
+    }
 }
 
 system( "mv $config_h.bak $config_h" ) and warn "$config_h not restored\n";
diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index e494413..c0b6f94 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -2499,6 +2499,98 @@
             -S "SSL - Unknown identity received" \
             -s "SSL - Verification of the message MAC failed"
 
+# Tests for EC J-PAKE
+
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE
+run_test    "ECJPAKE: client not configured" \
+            "$P_SRV debug_level=3" \
+            "$P_CLI debug_level=3" \
+            0 \
+            -C "add ciphersuite: c0ff" \
+            -C "adding ecjpake_kkpp extension" \
+            -S "found ecjpake kkpp extension" \
+            -S "skip ecjpake kkpp extension" \
+            -S "ciphersuite mismatch: ecjpake not configured" \
+            -S "server hello, ecjpake kkpp extension" \
+            -C "found ecjpake_kkpp extension" \
+            -S "None of the common ciphersuites is usable"
+
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE
+run_test    "ECJPAKE: server not configured" \
+            "$P_SRV debug_level=3" \
+            "$P_CLI debug_level=3 ecjpake_pw=bla \
+             force_ciphersuite=TLS-ECJPAKE-WITH-AES-128-CCM-8" \
+            1 \
+            -c "add ciphersuite: c0ff" \
+            -c "adding ecjpake_kkpp extension" \
+            -s "found ecjpake kkpp extension" \
+            -s "skip ecjpake kkpp extension" \
+            -s "ciphersuite mismatch: ecjpake not configured" \
+            -S "server hello, ecjpake kkpp extension" \
+            -C "found ecjpake_kkpp extension" \
+            -s "None of the common ciphersuites is usable"
+
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE
+run_test    "ECJPAKE: working, TLS" \
+            "$P_SRV debug_level=3 ecjpake_pw=bla" \
+            "$P_CLI debug_level=3 ecjpake_pw=bla \
+             force_ciphersuite=TLS-ECJPAKE-WITH-AES-128-CCM-8" \
+            0 \
+            -c "add ciphersuite: c0ff" \
+            -c "adding ecjpake_kkpp extension" \
+            -C "re-using cached ecjpake parameters" \
+            -s "found ecjpake kkpp extension" \
+            -S "skip ecjpake kkpp extension" \
+            -S "ciphersuite mismatch: ecjpake not configured" \
+            -s "server hello, ecjpake kkpp extension" \
+            -c "found ecjpake_kkpp extension" \
+            -S "None of the common ciphersuites is usable" \
+            -S "SSL - Verification of the message MAC failed"
+
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE
+run_test    "ECJPAKE: password mismatch, TLS" \
+            "$P_SRV debug_level=3 ecjpake_pw=bla" \
+            "$P_CLI debug_level=3 ecjpake_pw=bad \
+             force_ciphersuite=TLS-ECJPAKE-WITH-AES-128-CCM-8" \
+            1 \
+            -C "re-using cached ecjpake parameters" \
+            -s "SSL - Verification of the message MAC failed"
+
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE
+run_test    "ECJPAKE: working, DTLS" \
+            "$P_SRV debug_level=3 dtls=1 ecjpake_pw=bla" \
+            "$P_CLI debug_level=3 dtls=1 ecjpake_pw=bla \
+             force_ciphersuite=TLS-ECJPAKE-WITH-AES-128-CCM-8" \
+            0 \
+            -c "re-using cached ecjpake parameters" \
+            -S "SSL - Verification of the message MAC failed"
+
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE
+run_test    "ECJPAKE: working, DTLS, no cookie" \
+            "$P_SRV debug_level=3 dtls=1 ecjpake_pw=bla cookies=0" \
+            "$P_CLI debug_level=3 dtls=1 ecjpake_pw=bla \
+             force_ciphersuite=TLS-ECJPAKE-WITH-AES-128-CCM-8" \
+            0 \
+            -C "re-using cached ecjpake parameters" \
+            -S "SSL - Verification of the message MAC failed"
+
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE
+run_test    "ECJPAKE: password mismatch, DTLS" \
+            "$P_SRV debug_level=3 dtls=1 ecjpake_pw=bla" \
+            "$P_CLI debug_level=3 dtls=1 ecjpake_pw=bad \
+             force_ciphersuite=TLS-ECJPAKE-WITH-AES-128-CCM-8" \
+            1 \
+            -c "re-using cached ecjpake parameters" \
+            -s "SSL - Verification of the message MAC failed"
+
+# for tests with configs/config-thread.h
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE
+run_test    "ECJPAKE: working, DTLS, nolog" \
+            "$P_SRV dtls=1 ecjpake_pw=bla" \
+            "$P_CLI dtls=1 ecjpake_pw=bla \
+             force_ciphersuite=TLS-ECJPAKE-WITH-AES-128-CCM-8" \
+            0
+
 # Tests for ciphersuites per version
 
 run_test    "Per-version suites: SSL3" \
diff --git a/tests/suites/test_suite_ecjpake.data b/tests/suites/test_suite_ecjpake.data
new file mode 100644
index 0000000..1a772a9
--- /dev/null
+++ b/tests/suites/test_suite_ecjpake.data
@@ -0,0 +1,230 @@
+ECJPAKE selftest
+ecjpake_selftest:
+
+ECJPAKE round one: client, valid
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"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":0
+
+ECJPAKE round one: server, valid
+read_round_one:MBEDTLS_ECJPAKE_SERVER:"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":0
+
+ECJPAKE round one: role mismatch
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"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":MBEDTLS_ERR_ECP_VERIFY_FAILED
+
+ECJPAKE round one: trailing byte
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"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":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: no data
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: length of first point too small
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"00":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: length of first point too big
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"01":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: no point data
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"0104":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: first point is zero
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"0100":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round one: KKP1: unknown first point format
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41057ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b":MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE
+
+ECJPAKE round one: KKP1: nothing after first point
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: length of second point too small
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b00":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: length of second point too big
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b01":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: no second point data
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b0104":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: unknow second point format
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b410509f85b3d20ebd7885ce464c08d056d6428fe4dd9287aa365f131f4360ff386d846898bc4b41583c2a5197f65d78742746c12a5ec0a4ffe2f270a750a1d8fb516":MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE
+
+ECJPAKE round one: KKP1: nothing after second point
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b410409f85b3d20ebd7885ce464c08d056d6428fe4dd9287aa365f131f4360ff386d846898bc4b41583c2a5197f65d78742746c12a5ec0a4ffe2f270a750a1d8fb516":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: zero-length r
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b410409f85b3d20ebd7885ce464c08d056d6428fe4dd9287aa365f131f4360ff386d846898bc4b41583c2a5197f65d78742746c12a5ec0a4ffe2f270a750a1d8fb51600":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round one: KKP1: no data for r
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b410409f85b3d20ebd7885ce464c08d056d6428fe4dd9287aa365f131f4360ff386d846898bc4b41583c2a5197f65d78742746c12a5ec0a4ffe2f270a750a1d8fb51601":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP1: corrupted r
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b410409f85b3d20ebd7885ce464c08d056d6428fe4dd9287aa365f131f4360ff386d846898bc4b41583c2a5197f65d78742746c12a5ec0a4ffe2f270a750a1d8fb51620934d74eb43e54df424fd96306c0117bf131afabf90a9d33d1198d90519373515":MBEDTLS_ERR_ECP_VERIFY_FAILED
+
+ECJPAKE round one: KKP1: X not on the curve
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"41047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2a410409f85b3d20ebd7885ce464c08d056d6428fe4dd9287aa365f131f4360ff386d846898bc4b41583c2a5197f65d78742746c12a5ec0a4ffe2f270a750a1d8fb51620934d74eb43e54df424fd96306c0117bf131afabf90a9d33d1198d90519373514":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round one: KKP2: no data
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"4104190a07700ffa4be6ae1d79ee0f06aeb544cd5addaabedf70f8623321332c54f355f0fbfec783ed359e5d0bf7377a0fc4ea7ace473c9c112b41ccd41ac56a56124104360a1cea33fce641156458e0a4eac219e96831e6aebc88b3f3752f93a0281d1bf1fb106051db9694a8d6e862a5ef1324a3d9e27894f1ee4f7c59199965a8dd4a2091847d2d22df3ee55faa2a3fb33fd2d1e055a07a7c61ecfb8d80ec00c2c9eb12":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP2: length of first point too small
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"4104190a07700ffa4be6ae1d79ee0f06aeb544cd5addaabedf70f8623321332c54f355f0fbfec783ed359e5d0bf7377a0fc4ea7ace473c9c112b41ccd41ac56a56124104360a1cea33fce641156458e0a4eac219e96831e6aebc88b3f3752f93a0281d1bf1fb106051db9694a8d6e862a5ef1324a3d9e27894f1ee4f7c59199965a8dd4a2091847d2d22df3ee55faa2a3fb33fd2d1e055a07a7c61ecfb8d80ec00c2c9eb1200":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP2: length of first point too big
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"4104190a07700ffa4be6ae1d79ee0f06aeb544cd5addaabedf70f8623321332c54f355f0fbfec783ed359e5d0bf7377a0fc4ea7ace473c9c112b41ccd41ac56a56124104360a1cea33fce641156458e0a4eac219e96831e6aebc88b3f3752f93a0281d1bf1fb106051db9694a8d6e862a5ef1324a3d9e27894f1ee4f7c59199965a8dd4a2091847d2d22df3ee55faa2a3fb33fd2d1e055a07a7c61ecfb8d80ec00c2c9eb1201":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP2: no point data
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"4104190a07700ffa4be6ae1d79ee0f06aeb544cd5addaabedf70f8623321332c54f355f0fbfec783ed359e5d0bf7377a0fc4ea7ace473c9c112b41ccd41ac56a56124104360a1cea33fce641156458e0a4eac219e96831e6aebc88b3f3752f93a0281d1bf1fb106051db9694a8d6e862a5ef1324a3d9e27894f1ee4f7c59199965a8dd4a2091847d2d22df3ee55faa2a3fb33fd2d1e055a07a7c61ecfb8d80ec00c2c9eb120104":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP2: first point is zero
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"4104190a07700ffa4be6ae1d79ee0f06aeb544cd5addaabedf70f8623321332c54f355f0fbfec783ed359e5d0bf7377a0fc4ea7ace473c9c112b41ccd41ac56a56124104360a1cea33fce641156458e0a4eac219e96831e6aebc88b3f3752f93a0281d1bf1fb106051db9694a8d6e862a5ef1324a3d9e27894f1ee4f7c59199965a8dd4a2091847d2d22df3ee55faa2a3fb33fd2d1e055a07a7c61ecfb8d80ec00c2c9eb120100":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round one: KKP2: unknown first point format
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"4104190a07700ffa4be6ae1d79ee0f06aeb544cd5addaabedf70f8623321332c54f355f0fbfec783ed359e5d0bf7377a0fc4ea7ace473c9c112b41ccd41ac56a56124104360a1cea33fce641156458e0a4eac219e96831e6aebc88b3f3752f93a0281d1bf1fb106051db9694a8d6e862a5ef1324a3d9e27894f1ee4f7c59199965a8dd4a2091847d2d22df3ee55faa2a3fb33fd2d1e055a07a7c61ecfb8d80ec00c2c9eb1241057ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b":MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE
+
+ECJPAKE round one: KKP2: nothing after first point
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"4104190a07700ffa4be6ae1d79ee0f06aeb544cd5addaabedf70f8623321332c54f355f0fbfec783ed359e5d0bf7377a0fc4ea7ace473c9c112b41ccd41ac56a56124104360a1cea33fce641156458e0a4eac219e96831e6aebc88b3f3752f93a0281d1bf1fb106051db9694a8d6e862a5ef1324a3d9e27894f1ee4f7c59199965a8dd4a2091847d2d22df3ee55faa2a3fb33fd2d1e055a07a7c61ecfb8d80ec00c2c9eb1241047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP2: length of second point too small
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"4104190a07700ffa4be6ae1d79ee0f06aeb544cd5addaabedf70f8623321332c54f355f0fbfec783ed359e5d0bf7377a0fc4ea7ace473c9c112b41ccd41ac56a56124104360a1cea33fce641156458e0a4eac219e96831e6aebc88b3f3752f93a0281d1bf1fb106051db9694a8d6e862a5ef1324a3d9e27894f1ee4f7c59199965a8dd4a2091847d2d22df3ee55faa2a3fb33fd2d1e055a07a7c61ecfb8d80ec00c2c9eb1241047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b00":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP2: length of second point too big
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"4104190a07700ffa4be6ae1d79ee0f06aeb544cd5addaabedf70f8623321332c54f355f0fbfec783ed359e5d0bf7377a0fc4ea7ace473c9c112b41ccd41ac56a56124104360a1cea33fce641156458e0a4eac219e96831e6aebc88b3f3752f93a0281d1bf1fb106051db9694a8d6e862a5ef1324a3d9e27894f1ee4f7c59199965a8dd4a2091847d2d22df3ee55faa2a3fb33fd2d1e055a07a7c61ecfb8d80ec00c2c9eb1241047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b01":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP2: no second point data
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"4104190a07700ffa4be6ae1d79ee0f06aeb544cd5addaabedf70f8623321332c54f355f0fbfec783ed359e5d0bf7377a0fc4ea7ace473c9c112b41ccd41ac56a56124104360a1cea33fce641156458e0a4eac219e96831e6aebc88b3f3752f93a0281d1bf1fb106051db9694a8d6e862a5ef1324a3d9e27894f1ee4f7c59199965a8dd4a2091847d2d22df3ee55faa2a3fb33fd2d1e055a07a7c61ecfb8d80ec00c2c9eb1241047ea6e3a4487037a9e0dbd79262b2cc273e779930fc18409ac5361c5fe669d702e147790aeb4ce7fd6575ab0f6c7fd1c335939aa863ba37ec91b7e32bb013bb2b0104":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP2: unknow second point format
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"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":MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE
+
+ECJPAKE round one: KKP2: nothing after second point
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"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":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP2: zero-length r
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"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":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round one: KKP2: no data for r
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"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":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round one: KKP2: corrupted r
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"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":MBEDTLS_ERR_ECP_VERIFY_FAILED
+
+ECJPAKE round one: KKP2: X not on the curve
+read_round_one:MBEDTLS_ECJPAKE_CLIENT:"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":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round two client: valid
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a641045516ea3e54a0d5d8b2ce786b38d383370029a5dbe4459c9dd601b408a24ae6465c8ac905b9eb03b5d3691c139ef83f1cd4200f6c9cd4ec392218a59ed243d3c820ff724a9a70b88cb86f20b434c6865aa1cd7906dd7c9bce3525f508276f26836c":0
+
+ECJPAKE round two client: trailing byte
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a641045516ea3e54a0d5d8b2ce786b38d383370029a5dbe4459c9dd601b408a24ae6465c8ac905b9eb03b5d3691c139ef83f1cd4200f6c9cd4ec392218a59ed243d3c820ff724a9a70b88cb86f20b434c6865aa1cd7906dd7c9bce3525f508276f26836c00":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: no data
+read_round_two_cli:"":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: ECParams too short
+read_round_two_cli:"0300":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: ECParams not named curve
+read_round_two_cli:"010017":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: ECParams wrong curve
+read_round_two_cli:"030016":MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE
+
+ECJPAKE round two client: no data after ECParams
+read_round_two_cli:"030017":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: length of first point too small
+read_round_two_cli:"03001700":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: length of first point too big
+read_round_two_cli:"03001701":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: no first point data
+read_round_two_cli:"0300170104":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: first point is zero
+read_round_two_cli:"0300170100":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round two client: unknown first point format
+read_round_two_cli:"03001741050fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a6":MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE
+
+ECJPAKE round two client: nothing after first point
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a6":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: length of second point too small
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a600":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: length of second point too big
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a601":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: no second point data
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a60104":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: unknown second point format
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a641055516ea3e54a0d5d8b2ce786b38d383370029a5dbe4459c9dd601b408a24ae6465c8ac905b9eb03b5d3691c139ef83f1cd4200f6c9cd4ec392218a59ed243d3c8":MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE
+
+ECJPAKE round two client: nothing after second point
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a641045516ea3e54a0d5d8b2ce786b38d383370029a5dbe4459c9dd601b408a24ae6465c8ac905b9eb03b5d3691c139ef83f1cd4200f6c9cd4ec392218a59ed243d3c8":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: zero-length r
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a641045516ea3e54a0d5d8b2ce786b38d383370029a5dbe4459c9dd601b408a24ae6465c8ac905b9eb03b5d3691c139ef83f1cd4200f6c9cd4ec392218a59ed243d3c800":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round two client: no data for r
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a641045516ea3e54a0d5d8b2ce786b38d383370029a5dbe4459c9dd601b408a24ae6465c8ac905b9eb03b5d3691c139ef83f1cd4200f6c9cd4ec392218a59ed243d3c801":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two client: corrupted r
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a641045516ea3e54a0d5d8b2ce786b38d383370029a5dbe4459c9dd601b408a24ae6465c8ac905b9eb03b5d3691c139ef83f1cd4200f6c9cd4ec392218a59ed243d3c820ff724a9a70b88cb86f20b434c6865aa1cd7906dd7c9bce3525f508276f26836d":MBEDTLS_ERR_ECP_VERIFY_FAILED
+
+ECJPAKE round two client: X not on the curve
+read_round_two_cli:"03001741040fb22b1d5d1123e0ef9feb9d8a2e590a1f4d7ced2c2b06586e8f2a16d4eb2fda4328a20b07d8fd667654ca18c54e32a333a0845451e926ee8804fd7af0aaa7a741045516ea3e54a0d5d8b2ce786b38d383370029a5dbe4459c9dd601b408a24ae6465c8ac905b9eb03b5d3691c139ef83f1cd4200f6c9cd4ec392218a59ed243d3c820ff724a9a70b88cb86f20b434c6865aa1cd7906dd7c9bce3525f508276f26836c":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round two server: valid
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee4104077e8c31e20e6bedb760c13593e69f15be85c27d68cd09ccb8c4183608917c5c3d409fac39fefee82f7292d36f0d23e055913f45a52b85dd8a2052e9e129bb4d200f011f19483535a6e89a580c9b0003baf21462ece91a82cc38dbdcae60d9c54c":0
+
+ECJPAKE round two server: trailing byte
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee4104077e8c31e20e6bedb760c13593e69f15be85c27d68cd09ccb8c4183608917c5c3d409fac39fefee82f7292d36f0d23e055913f45a52b85dd8a2052e9e129bb4d200f011f19483535a6e89a580c9b0003baf21462ece91a82cc38dbdcae60d9c54c00":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: no data
+read_round_two_srv:"":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: length of forst point too small
+read_round_two_srv:"00":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: length of first point too big
+read_round_two_srv:"01":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: no first point data
+read_round_two_srv:"0104":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: first point is zero
+read_round_two_srv:"0100":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round two server: unknown first point format
+read_round_two_srv:"410569d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee":MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE
+
+ECJPAKE round two server: nothing after first point
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: length of second point too small
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee00":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: length of second point too big
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee01":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: no second point data
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee0104":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: unknown second point format
+read_round_two_srv:"410569d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee4104077e8c31e20e6bedb760c13593e69f15be85c27d68cd09ccb8c4183608917c5c3d409fac39fefee82f7292d36f0d23e055913f45a52b85dd8a2052e9e129bb4d":MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE
+
+ECJPAKE round two server: nothing after second point
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee4104077e8c31e20e6bedb760c13593e69f15be85c27d68cd09ccb8c4183608917c5c3d409fac39fefee82f7292d36f0d23e055913f45a52b85dd8a2052e9e129bb4d":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: zero-length r
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee4104077e8c31e20e6bedb760c13593e69f15be85c27d68cd09ccb8c4183608917c5c3d409fac39fefee82f7292d36f0d23e055913f45a52b85dd8a2052e9e129bb4d00":MBEDTLS_ERR_ECP_INVALID_KEY
+
+ECJPAKE round two server: no data for r
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee4104077e8c31e20e6bedb760c13593e69f15be85c27d68cd09ccb8c4183608917c5c3d409fac39fefee82f7292d36f0d23e055913f45a52b85dd8a2052e9e129bb4d20":MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+
+ECJPAKE round two server: corrupted r
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ee4104077e8c31e20e6bedb760c13593e69f15be85c27d68cd09ccb8c4183608917c5c3d409fac39fefee82f7292d36f0d23e055913f45a52b85dd8a2052e9e129bb4d200f011f19483535a6e89a580c9b0003baf21462ece91a82cc38dbdcae60d9c54d":MBEDTLS_ERR_ECP_VERIFY_FAILED
+
+ECJPAKE round two server: X not on curve
+read_round_two_srv:"410469d54ee85e90ce3f1246742de507e939e81d1dc1c5cb988b58c310c9fdd9524d93720b45541c83ee8841191da7ced86e3312d43623c1d63e74989aba4affd1ef4104077e8c31e20e6bedb760c13593e69f15be85c27d68cd09ccb8c4183608917c5c3d409fac39fefee82f7292d36f0d23e055913f45a52b85dd8a2052e9e129bb4d200f011f19483535a6e89a580c9b0003baf21462ece91a82cc38dbdcae60d9c54c":MBEDTLS_ERR_ECP_INVALID_KEY
diff --git a/tests/suites/test_suite_ecjpake.function b/tests/suites/test_suite_ecjpake.function
new file mode 100644
index 0000000..8d867b7
--- /dev/null
+++ b/tests/suites/test_suite_ecjpake.function
@@ -0,0 +1,190 @@
+/* BEGIN_HEADER */
+#include "mbedtls/ecjpake.h"
+
+#if defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) && defined(MBEDTLS_SHA256_C)
+static const unsigned char ecjpake_test_x1[] = {
+    0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c,
+    0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18,
+    0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, 0x21
+};
+
+static const unsigned char ecjpake_test_x2[] = {
+    0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c,
+    0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
+    0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f, 0x81
+};
+
+static const unsigned char ecjpake_test_x3[] = {
+    0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c,
+    0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
+    0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f, 0x81
+};
+
+static const unsigned char ecjpake_test_x4[] = {
+    0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc,
+    0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8,
+    0xd9, 0xda, 0xdb, 0xdc, 0xdd, 0xde, 0xdf, 0xe1
+};
+
+static const unsigned char ecjpake_test_X1[] = {
+    0x04, 0xac, 0xcf, 0x01, 0x06, 0xef, 0x85, 0x8f, 0xa2, 0xd9, 0x19, 0x33,
+    0x13, 0x46, 0x80, 0x5a, 0x78, 0xb5, 0x8b, 0xba, 0xd0, 0xb8, 0x44, 0xe5,
+    0xc7, 0x89, 0x28, 0x79, 0x14, 0x61, 0x87, 0xdd, 0x26, 0x66, 0xad, 0xa7,
+    0x81, 0xbb, 0x7f, 0x11, 0x13, 0x72, 0x25, 0x1a, 0x89, 0x10, 0x62, 0x1f,
+    0x63, 0x4d, 0xf1, 0x28, 0xac, 0x48, 0xe3, 0x81, 0xfd, 0x6e, 0xf9, 0x06,
+    0x07, 0x31, 0xf6, 0x94, 0xa4
+};
+
+static const unsigned char ecjpake_test_X2[] = {
+    0x04, 0x7e, 0xa6, 0xe3, 0xa4, 0x48, 0x70, 0x37, 0xa9, 0xe0, 0xdb, 0xd7,
+    0x92, 0x62, 0xb2, 0xcc, 0x27, 0x3e, 0x77, 0x99, 0x30, 0xfc, 0x18, 0x40,
+    0x9a, 0xc5, 0x36, 0x1c, 0x5f, 0xe6, 0x69, 0xd7, 0x02, 0xe1, 0x47, 0x79,
+    0x0a, 0xeb, 0x4c, 0xe7, 0xfd, 0x65, 0x75, 0xab, 0x0f, 0x6c, 0x7f, 0xd1,
+    0xc3, 0x35, 0x93, 0x9a, 0xa8, 0x63, 0xba, 0x37, 0xec, 0x91, 0xb7, 0xe3,
+    0x2b, 0xb0, 0x13, 0xbb, 0x2b
+};
+
+static const unsigned char ecjpake_test_X3[] = {
+    0x04, 0x7e, 0xa6, 0xe3, 0xa4, 0x48, 0x70, 0x37, 0xa9, 0xe0, 0xdb, 0xd7,
+    0x92, 0x62, 0xb2, 0xcc, 0x27, 0x3e, 0x77, 0x99, 0x30, 0xfc, 0x18, 0x40,
+    0x9a, 0xc5, 0x36, 0x1c, 0x5f, 0xe6, 0x69, 0xd7, 0x02, 0xe1, 0x47, 0x79,
+    0x0a, 0xeb, 0x4c, 0xe7, 0xfd, 0x65, 0x75, 0xab, 0x0f, 0x6c, 0x7f, 0xd1,
+    0xc3, 0x35, 0x93, 0x9a, 0xa8, 0x63, 0xba, 0x37, 0xec, 0x91, 0xb7, 0xe3,
+    0x2b, 0xb0, 0x13, 0xbb, 0x2b
+};
+
+static const unsigned char ecjpake_test_X4[] = {
+    0x04, 0x19, 0x0a, 0x07, 0x70, 0x0f, 0xfa, 0x4b, 0xe6, 0xae, 0x1d, 0x79,
+    0xee, 0x0f, 0x06, 0xae, 0xb5, 0x44, 0xcd, 0x5a, 0xdd, 0xaa, 0xbe, 0xdf,
+    0x70, 0xf8, 0x62, 0x33, 0x21, 0x33, 0x2c, 0x54, 0xf3, 0x55, 0xf0, 0xfb,
+    0xfe, 0xc7, 0x83, 0xed, 0x35, 0x9e, 0x5d, 0x0b, 0xf7, 0x37, 0x7a, 0x0f,
+    0xc4, 0xea, 0x7a, 0xce, 0x47, 0x3c, 0x9c, 0x11, 0x2b, 0x41, 0xcc, 0xd4,
+    0x1a, 0xc5, 0x6a, 0x56, 0x12
+};
+
+/* Load my private and public keys, and peer's public keys */
+static int ecjpake_test_load( mbedtls_ecjpake_context *ctx,
+                              const unsigned char *xm1, size_t len_xm1,
+                              const unsigned char *xm2, size_t len_xm2,
+                              const unsigned char *Xm1, size_t len_Xm1,
+                              const unsigned char *Xm2, size_t len_Xm2,
+                              const unsigned char *Xp1, size_t len_Xp1,
+                              const unsigned char *Xp2, size_t len_Xp2 )
+{
+    int ret;
+
+    MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &ctx->xm1, xm1, len_xm1 ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &ctx->xm2, xm2, len_xm2 ) );
+
+    MBEDTLS_MPI_CHK( mbedtls_ecp_point_read_binary( &ctx->grp,
+                     &ctx->Xm1, Xm1, len_Xm1 ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_point_read_binary( &ctx->grp,
+                     &ctx->Xm2, Xm2, len_Xm2 ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_point_read_binary( &ctx->grp,
+                     &ctx->Xp1, Xp1, len_Xp1 ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_point_read_binary( &ctx->grp,
+                     &ctx->Xp2, Xp2, len_Xp2 ) );
+
+cleanup:
+    return( ret );
+}
+
+#define ADD_SIZE( x )   x, sizeof( x )
+#endif /* MBEDTLS_ECP_DP_SECP256R1_ENABLED && MBEDTLS_SHA256_C */
+/* END_HEADER */
+
+/* BEGIN_DEPENDENCIES
+ * depends_on:MBEDTLS_ECJPAKE_C
+ * END_DEPENDENCIES
+ */
+
+/* BEGIN_CASE depends_on:MBEDTLS_SELF_TEST */
+void ecjpake_selftest()
+{
+    TEST_ASSERT( mbedtls_ecjpake_self_test( 0 ) == 0 );
+}
+/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_ECP_DP_SECP256R1_ENABLED:MBEDTLS_SHA256_C */
+void read_round_one( int role, char *data, int ref_ret )
+{
+    mbedtls_ecjpake_context ctx;
+    const unsigned char pw[] = {};
+    unsigned char *msg;
+    size_t len;
+
+    mbedtls_ecjpake_init( &ctx );
+
+    msg = unhexify_alloc( data, &len );
+    TEST_ASSERT( msg != NULL );
+
+    TEST_ASSERT( mbedtls_ecjpake_setup( &ctx, role,
+                 MBEDTLS_MD_SHA256, MBEDTLS_ECP_DP_SECP256R1, pw, 0 ) == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_read_round_one( &ctx, msg, len ) == ref_ret );
+
+exit:
+    mbedtls_ecjpake_free( &ctx );
+    mbedtls_free( msg );
+}
+/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_ECP_DP_SECP256R1_ENABLED:MBEDTLS_SHA256_C */
+void read_round_two_cli( char *data, int ref_ret )
+{
+    mbedtls_ecjpake_context ctx;
+    const unsigned char pw[] = {};
+    unsigned char *msg;
+    size_t len;
+
+    mbedtls_ecjpake_init( &ctx );
+
+    msg = unhexify_alloc( data, &len );
+    TEST_ASSERT( msg != NULL );
+
+    TEST_ASSERT( mbedtls_ecjpake_setup( &ctx, MBEDTLS_ECJPAKE_CLIENT,
+                 MBEDTLS_MD_SHA256, MBEDTLS_ECP_DP_SECP256R1, pw, 0 ) == 0 );
+
+    TEST_ASSERT( ecjpake_test_load( &ctx,
+                 ADD_SIZE( ecjpake_test_x1 ), ADD_SIZE( ecjpake_test_x2 ),
+                 ADD_SIZE( ecjpake_test_X1 ), ADD_SIZE( ecjpake_test_X2 ),
+                 ADD_SIZE( ecjpake_test_X3 ), ADD_SIZE( ecjpake_test_X4 ) )
+            == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_read_round_two( &ctx, msg, len ) == ref_ret );
+
+exit:
+    mbedtls_ecjpake_free( &ctx );
+    mbedtls_free( msg );
+}
+/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_ECP_DP_SECP256R1_ENABLED:MBEDTLS_SHA256_C */
+void read_round_two_srv( char *data, int ref_ret )
+{
+    mbedtls_ecjpake_context ctx;
+    const unsigned char pw[] = {};
+    unsigned char *msg;
+    size_t len;
+
+    mbedtls_ecjpake_init( &ctx );
+
+    msg = unhexify_alloc( data, &len );
+    TEST_ASSERT( msg != NULL );
+
+    TEST_ASSERT( mbedtls_ecjpake_setup( &ctx, MBEDTLS_ECJPAKE_SERVER,
+                 MBEDTLS_MD_SHA256, MBEDTLS_ECP_DP_SECP256R1, pw, 0 ) == 0 );
+
+    TEST_ASSERT( ecjpake_test_load( &ctx,
+                 ADD_SIZE( ecjpake_test_x3 ), ADD_SIZE( ecjpake_test_x4 ),
+                 ADD_SIZE( ecjpake_test_X3 ), ADD_SIZE( ecjpake_test_X4 ),
+                 ADD_SIZE( ecjpake_test_X1 ), ADD_SIZE( ecjpake_test_X2 ) )
+            == 0 );
+
+    TEST_ASSERT( mbedtls_ecjpake_read_round_two( &ctx, msg, len ) == ref_ret );
+
+exit:
+    mbedtls_ecjpake_free( &ctx );
+    mbedtls_free( msg );
+}
+/* END_CASE */
diff --git a/tests/suites/test_suite_x509parse.data b/tests/suites/test_suite_x509parse.data
index e25258f..eb4df8f 100644
--- a/tests/suites/test_suite_x509parse.data
+++ b/tests/suites/test_suite_x509parse.data
@@ -673,7 +673,7 @@
 
 X509 Certificate verification #75 (encoding mismatch)
 depends_on:MBEDTLS_PEM_PARSE_C
-x509_verify:"data_files/enco-cert-utf8str.pem":"data_files/enco-ca-prstr.pem":"data_files/crl.pem":"NULL":MBEDTLS_ERR_X509_CERT_VERIFY_FAILED:MBEDTLS_X509_BADCERT_BAD_KEY:"NULL"
+x509_verify:"data_files/enco-cert-utf8str.pem":"data_files/enco-ca-prstr.pem":"data_files/crl.pem":"NULL":0:0:"NULL"
 
 X509 Certificate verification #76 (multiple CRLs, not revoked)
 depends_on:MBEDTLS_PEM_PARSE_C:MBEDTLS_ECDSA_C:MBEDTLS_ECP_DP_SECP384R1_ENABLED:MBEDTLS_ECP_DP_SECP256R1_ENABLED:MBEDTLS_SHA256_C:MBEDTLS_RSA_C
@@ -697,7 +697,7 @@
 
 X509 Certificate verification #81 (multiple CRLs, none relevant)
 depends_on:MBEDTLS_PEM_PARSE_C:MBEDTLS_ECDSA_C:MBEDTLS_ECP_DP_SECP384R1_ENABLED:MBEDTLS_ECP_DP_SECP256R1_ENABLED:MBEDTLS_SHA256_C:MBEDTLS_RSA_C
-x509_verify:"data_files/enco-cert-utf8str.pem":"data_files/enco-ca-prstr.pem":"data_files/crl_cat_rsa-ec.pem":"NULL":MBEDTLS_ERR_X509_CERT_VERIFY_FAILED:MBEDTLS_X509_BADCERT_BAD_KEY:"NULL"
+x509_verify:"data_files/enco-cert-utf8str.pem":"data_files/enco-ca-prstr.pem":"data_files/crl_cat_rsa-ec.pem":"NULL":0:0:"NULL"
 
 X509 Certificate verification callback: trusted EE cert
 depends_on:MBEDTLS_PEM_PARSE_C:MBEDTLS_ECDSA_C:MBEDTLS_SHA256_C:MBEDTLS_ECP_DP_SECP256R1_ENABLED
diff --git a/tests/suites/test_suite_x509parse.function b/tests/suites/test_suite_x509parse.function
index 95fc287..ccbd329 100644
--- a/tests/suites/test_suite_x509parse.function
+++ b/tests/suites/test_suite_x509parse.function
@@ -6,6 +6,19 @@
 #include "mbedtls/oid.h"
 #include "mbedtls/base64.h"
 
+const mbedtls_x509_crt_profile compat_profile =
+{
+    MBEDTLS_X509_ID_FLAG( MBEDTLS_MD_SHA1 ) |
+    MBEDTLS_X509_ID_FLAG( MBEDTLS_MD_RIPEMD160 ) |
+    MBEDTLS_X509_ID_FLAG( MBEDTLS_MD_SHA224 ) |
+    MBEDTLS_X509_ID_FLAG( MBEDTLS_MD_SHA256 ) |
+    MBEDTLS_X509_ID_FLAG( MBEDTLS_MD_SHA384 ) |
+    MBEDTLS_X509_ID_FLAG( MBEDTLS_MD_SHA512 ),
+    0xFFFFFFF, /* Any PK alg    */
+    0xFFFFFFF, /* Any curve     */
+    1024,
+};
+
 int verify_none( void *data, mbedtls_x509_crt *crt, int certificate_depth, uint32_t *flags )
 {
     ((void) data);
@@ -191,7 +204,7 @@
     TEST_ASSERT( mbedtls_x509_crt_parse_file( &ca, ca_file ) == 0 );
     TEST_ASSERT( mbedtls_x509_crl_parse_file( &crl, crl_file ) == 0 );
 
-    res = mbedtls_x509_crt_verify( &crt, &ca, &crl, cn_name, &flags, f_vrfy, NULL );
+    res = mbedtls_x509_crt_verify_with_profile( &crt, &ca, &crl, &compat_profile, cn_name, &flags, f_vrfy, NULL );
 
     TEST_ASSERT( res == ( result ) );
     TEST_ASSERT( flags == (uint32_t)( flags_result ) );
diff --git a/yotta/data/README.md b/yotta/data/README.md
index 521a1f8..7ec7cef 100644
--- a/yotta/data/README.md
+++ b/yotta/data/README.md
@@ -1,49 +1,51 @@
 # mbed TLS
 
-mbed TLS (formerly known as PolarSSL) makes it trivially easy for developers to include cryptographic and SSL/TLS capabilities in their embedded products, with a minimal code footprint. It offers an SSL library with an intuitive API and readable source code.
+mbed TLS makes it trivially easy for developers to include cryptographic and SSL/TLS capabilities in their embedded products, with a minimal code footprint. It offers an SSL library with an intuitive API and readable source code.
 
-The Beta release of mbed TLS integrates the mbed TLS library into mbed OS, mbed SDK and yotta. This is a preview release intended for evaluation only and is **not recommended for deployment**. It currently implements no secure source of random numbers, weakening its security.
+**Note:** The current release is beta, and implements no secure source of random numbers, weakening its security.
 
 Currently the only supported yotta targets are:
-- `frdm-k64f-gcc` and `frdm-k64f-armcc`
-- `x86-linux-native` and `x86-osx-native`
+- `frdm-k64f-gcc`
+- `frdm-k64f-armcc`
+- `x86-linux-native`
+- `x86-osx-native`
 
 ## Sample programs
 
 This release includes the following examples:
 
-1. [**Self test:**](https://github.com/ARMmbed/mbedtls/blob/development/yotta/data/example-selftest) found in `test/example-selftest`. Tests different basic functions in the mbed TLS library.
+1. [**Self test:**](https://github.com/ARMmbed/mbedtls/blob/development/yotta/data/example-selftest) Tests different basic functions in the mbed TLS library.
 
-2. [**Benchmark:**](https://github.com/ARMmbed/mbedtls/blob/development/yotta/data/example-benchmark) found in `test/example-benchmark`. Measures the time taken to perform basic cryptographic functions used in the library.
+2. [**Benchmark:**](https://github.com/ARMmbed/mbedtls/blob/development/yotta/data/example-benchmark) Measures the time taken to perform basic cryptographic functions used in the library.
 
-3. [**Hashing:**](https://github.com/ARMmbed/mbedtls/blob/development/yotta/data/example-hashing) found in `test/example-hashing`. Demonstrates the various APIs for computes hashes of data (also known as message digests) with SHA-256.
+3. [**Hashing:**](https://github.com/ARMmbed/mbedtls/blob/development/yotta/data/example-hashing) Demonstrates the various APIs for computing hashes of data (also known as message digests) with SHA-256.
 
-4. [**Authenticated encrypted:**](https://github.com/ARMmbed/mbedtls/blob/development/yotta/data/example-authcrypt) found in `test/example-authcrypt`. Demonstrates usage of the Cipher API for encrypting and authenticating data with AES-CCM.
+4. [**Authenticated encryption:**](https://github.com/ARMmbed/mbedtls/blob/development/yotta/data/example-authcrypt) Demonstrates usage of the Cipher API for encrypting and authenticating data with AES-CCM.
 
-These examples are integrated as yotta tests, so that they are built automatically when you build mbed TLS. Each of them comes with complete usage instructions as a Readme file in its directory.
+These examples are integrated as yotta tests, so that they are built automatically when you build mbed TLS. Each of them comes with complete usage instructions as a Readme file in the repository.
 
 ## Performing TLS and DTLS connections
 
-A high-level API for performing TLS and DTLS connections with mbed TLS in mbed OS is provided in a separate yotta module: [mbed-tls-sockets](https://github.com/ARMmbed/mbed-tls-sockets). It is the recommended API for TLS and DTLS connections.  It is very similar to the API provided by the [sockets](https://github.com/ARMmbed/sockets) module for unencrypted TCP and UDP connections.
+A high-level API for performing TLS and DTLS connections with mbed TLS in mbed OS is provided in a separate yotta module: [mbed-tls-sockets](https://github.com/ARMmbed/mbed-tls-sockets). We recommend this API for TLS and DTLS connections. It is very similar to the API provided by the [sockets](https://github.com/ARMmbed/sockets) module for unencrypted TCP and UDP connections.
 
 The `mbed-tls-sockets` module includes a complete [example TLS client](https://github.com/ARMmbed/mbed-tls-sockets/blob/master/test/tls-client/main.cpp) with [usage instructions](https://github.com/ARMmbed/mbed-tls-sockets/blob/master/test/tls-client/README.md).
 
 ## Configuring mbed TLS features
 
-mbed TLS makes it easy to disable any feature during compilation that isn't required for a particular project. The default configuration enables all modern and widely-used features, which should meet the needs of new projects, and disables all features that are older or less common, to minimize the code footprint.
+mbed TLS makes it easy to disable any feature during compilation, if that feature isn't required for a particular project. The default configuration enables all modern and widely-used features, which should meet the needs of new projects, and disables all features that are older or less common, to minimize the code footprint.
 
-The list of available compilation flags is presented in the fully documented [config.h file](https://github.com/ARMmbed/mbedtls/blob/development/include/mbedtls/config.h), present in the `mbedtls` directory of the yotta module.
+The list of available compilation flags is available in the fully documented [config.h file](https://github.com/ARMmbed/mbedtls/blob/development/include/mbedtls/config.h).
 
 If you need to adjust those flags, you can provide your own configuration-adjustment file with suitable `#define` and `#undef` statements. These will be included between the default definitions and the sanity checks. Your configuration file should be in your application's include directory, and can be named freely; you just need to let mbed TLS know the file's name. To do that, use yotta's [configuration system](http://docs.yottabuild.org/reference/config.html). The file's name should be in your `config.json` file, under mbedtls, as the key `user-config-file`.
 
-For example, in an application called `myapp`, if you want to enable the EC J-PAKE key exchange and disable the CBC cipher mode, you can create a file named for example `mbedtls-config-changes.h` in the `myapp` directory containing the following lines:
+For example, in an application called `myapp`, if you want to enable the EC J-PAKE key exchange and disable the CBC cipher mode, you can create a file named  `mbedtls-config-changes.h` in the `myapp` directory containing the following lines:
 
     #define MBEDTLS_ECJPAKE_C
     #define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
 
     #undef MBEDTLS_CIPHER_MODE_CBC
 
-and then create a file named `config.json` at the root of your application with the following contents:
+And then create a file named `config.json` at the root of your application with the following contents:
 
     {
        "mbedtls": {
@@ -55,7 +57,7 @@
 
 ## Getting mbed TLS from GitHub
 
-Like most components of mbed OS, mbed TLS is developed in the open and its source can be found on GitHub: [ARMmbed/mbedtls](https://github.com/ARMmbed/mbedtls). Unlike most other mbed OS components however, you cannot just clone the repository and run `yotta build` from its root. This is because mbed TLS also exists as an independent component, so its repository includes things that are not relevant for mbed OS, as well as other build systems.
+Like most components of mbed OS, mbed TLS is developed in the open and its source can be found on GitHub: [ARMmbed/mbedtls](https://github.com/ARMmbed/mbedtls). Unlike most other mbed OS components, however, you cannot just clone the repository and run `yotta build` from its root. This is because mbed TLS also exists as an independent component, so its repository includes things that are not relevant for mbed OS, as well as other build systems.
 
 The way to use mbed TLS from a clone of the GitHub repository is to run the following commands from the root of a checkout:
 
@@ -66,11 +68,20 @@
 
 ## Differences between the standalone and mbed OS editions
 
-While the two editions share the same code base, there are still a number of differences, mainly in configuration and in integration. You should keep in mind those differences when reading some articles of our [knowledge base](https://tls.mbed.org/kb), as currently the articles are about the standalone edition.
+While the two editions share the same code base, there are still a number of differences, mainly in configuration and integration. You should keep in mind those differences when reading some articles in our [knowledge base](https://tls.mbed.org/kb), as currently all the articles are about the standalone edition.
 
 * The mbed OS edition has a smaller set of features enabled by default in `config.h`, in order to reduce footprint. While the default configuration of the standalone edition puts more emphasize on maintaining interoperability with old peers, the mbed OS edition only enables the most modern ciphers and the latest version of (D)TLS.
-* The following components of mbed TLS are not enabled in the mbed OS edition as mbed OS already includes equivalent facilities: `net.c` and `timing.c`.
-* The mbed OS edition comes with a fully integrated API for (D)TLS connections in a companion module: [mbed-tls-sockets](https://github.com/ARMmbed/mbed-tls-sockets), see "Performing TLS and DTLS connections" above.
+
+* The following components of mbed TLS are disabled in the mbed OS edition: `net.c` and `timing.c`. This is because mbed OS includes their equivalents.
+
+* The mbed OS edition comes with a fully integrated API for (D)TLS connections in a companion module: [mbed-tls-sockets](https://github.com/ARMmbed/mbed-tls-sockets). See "Performing TLS and DTLS connections" above.
+
+## Other resources
+
+The [mbed TLS website](https://tls.mbed.org) contains many other useful
+resources for the developer, such as [developer
+documentation](https://tls.mbed.org/dev-corner), [knowledgebase
+articles](https://tls.mbed.org/kb), and a [support forum](https://tls.mbed.org/discussions).
 
 ## Contributing
 
@@ -88,4 +99,5 @@
 
 * Write a test that shows that the bug was fixed or that the feature works as expected.
 
-* Send a pull request and bug us until it gets merged and published. We will include your name in the ChangeLog :)
+* Send a pull request and bug us until it gets merged and published. We will include your name in the ChangeLog.
+