diff --git a/configs/config-default.h b/configs/config-default.h
new file mode 100644
index 0000000..4100c8e
--- /dev/null
+++ b/configs/config-default.h
@@ -0,0 +1,2911 @@
+/**
+ * \file config.h
+ *
+ * \brief Configuration options (set of defines)
+ *
+ *  This set of compile-time options may be used to enable
+ *  or disable features selectively, and reduce the global
+ *  memory footprint.
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+
+#ifndef MBEDTLS_CONFIG_H
+#define MBEDTLS_CONFIG_H
+
+#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE)
+#define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+
+/**
+ * \name SECTION: System support
+ *
+ * This section sets system specific settings.
+ * \{
+ */
+
+/**
+ * \def MBEDTLS_HAVE_ASM
+ *
+ * The compiler has support for asm().
+ *
+ * Requires support for asm() in compiler.
+ *
+ * Used in:
+ *      library/timing.c
+ *      library/padlock.c
+ *      include/mbedtls/bn_mul.h
+ *
+ * Comment to disable the use of assembly code.
+ */
+#define MBEDTLS_HAVE_ASM
+
+/**
+ * \def MBEDTLS_NO_UDBL_DIVISION
+ *
+ * The platform lacks support for double-width integer division (64-bit
+ * division on a 32-bit platform, 128-bit division on a 64-bit platform).
+ *
+ * Used in:
+ *      include/mbedtls/bignum.h
+ *      library/bignum.c
+ *
+ * The bignum code uses double-width division to speed up some operations.
+ * Double-width division is often implemented in software that needs to
+ * be linked with the program. The presence of a double-width integer
+ * type is usually detected automatically through preprocessor macros,
+ * but the automatic detection cannot know whether the code needs to
+ * and can be linked with an implementation of division for that type.
+ * By default division is assumed to be usable if the type is present.
+ * Uncomment this option to prevent the use of double-width division.
+ *
+ * Note that division for the native integer type is always required.
+ * Furthermore, a 64-bit type is always required even on a 32-bit
+ * platform, but it need not support multiplication or division. In some
+ * cases it is also desirable to disable some double-width operations. For
+ * example, if double-width division is implemented in software, disabling
+ * it can reduce code size in some embedded targets.
+ */
+//#define MBEDTLS_NO_UDBL_DIVISION
+
+/**
+ * \def MBEDTLS_HAVE_SSE2
+ *
+ * CPU supports SSE2 instruction set.
+ *
+ * Uncomment if the CPU supports SSE2 (IA-32 specific).
+ */
+//#define MBEDTLS_HAVE_SSE2
+
+/**
+ * \def MBEDTLS_HAVE_TIME
+ *
+ * System has time.h and time().
+ * The time does not need to be correct, only time differences are used,
+ * by contrast with MBEDTLS_HAVE_TIME_DATE
+ *
+ * Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT,
+ * MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and
+ * MBEDTLS_PLATFORM_STD_TIME.
+ *
+ * Comment if your system does not support time functions
+ */
+#define MBEDTLS_HAVE_TIME
+
+/**
+ * \def MBEDTLS_HAVE_TIME_DATE
+ *
+ * System has time.h and time(), gmtime() and the clock is correct.
+ * The time needs to be correct (not necesarily very accurate, but at least
+ * the date should be correct). This is used to verify the validity period of
+ * X.509 certificates.
+ *
+ * Comment if your system does not have a correct clock.
+ */
+#define MBEDTLS_HAVE_TIME_DATE
+
+/**
+ * \def MBEDTLS_PLATFORM_MEMORY
+ *
+ * Enable the memory allocation layer.
+ *
+ * By default mbed TLS uses the system-provided calloc() and free().
+ * This allows different allocators (self-implemented or provided) to be
+ * provided to the platform abstraction layer.
+ *
+ * Enabling MBEDTLS_PLATFORM_MEMORY without the
+ * MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide
+ * "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and
+ * free() function pointer at runtime.
+ *
+ * Enabling MBEDTLS_PLATFORM_MEMORY and specifying
+ * MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the
+ * alternate function at compile time.
+ *
+ * Requires: MBEDTLS_PLATFORM_C
+ *
+ * Enable this layer to allow use of alternative memory allocators.
+ */
+//#define MBEDTLS_PLATFORM_MEMORY
+
+/**
+ * \def MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
+ *
+ * Do not assign standard functions in the platform layer (e.g. calloc() to
+ * MBEDTLS_PLATFORM_STD_CALLOC and printf() to MBEDTLS_PLATFORM_STD_PRINTF)
+ *
+ * This makes sure there are no linking errors on platforms that do not support
+ * these functions. You will HAVE to provide alternatives, either at runtime
+ * via the platform_set_xxx() functions or at compile time by setting
+ * the MBEDTLS_PLATFORM_STD_XXX defines, or enabling a
+ * MBEDTLS_PLATFORM_XXX_MACRO.
+ *
+ * Requires: MBEDTLS_PLATFORM_C
+ *
+ * Uncomment to prevent default assignment of standard functions in the
+ * platform layer.
+ */
+//#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
+
+/**
+ * \def MBEDTLS_PLATFORM_EXIT_ALT
+ *
+ * MBEDTLS_PLATFORM_XXX_ALT: Uncomment a macro to let mbed TLS support the
+ * function in the platform abstraction layer.
+ *
+ * Example: In case you uncomment MBEDTLS_PLATFORM_PRINTF_ALT, mbed TLS will
+ * provide a function "mbedtls_platform_set_printf()" that allows you to set an
+ * alternative printf function pointer.
+ *
+ * All these define require MBEDTLS_PLATFORM_C to be defined!
+ *
+ * \note MBEDTLS_PLATFORM_SNPRINTF_ALT is required on Windows;
+ * it will be enabled automatically by check_config.h
+ *
+ * \warning MBEDTLS_PLATFORM_XXX_ALT cannot be defined at the same time as
+ * MBEDTLS_PLATFORM_XXX_MACRO!
+ *
+ * Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME
+ *
+ * Uncomment a macro to enable alternate implementation of specific base
+ * platform function
+ */
+//#define MBEDTLS_PLATFORM_EXIT_ALT
+//#define MBEDTLS_PLATFORM_TIME_ALT
+//#define MBEDTLS_PLATFORM_FPRINTF_ALT
+//#define MBEDTLS_PLATFORM_PRINTF_ALT
+//#define MBEDTLS_PLATFORM_SNPRINTF_ALT
+//#define MBEDTLS_PLATFORM_NV_SEED_ALT
+//#define MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT
+
+/**
+ * \def MBEDTLS_DEPRECATED_WARNING
+ *
+ * Mark deprecated functions so that they generate a warning if used.
+ * Functions deprecated in one version will usually be removed in the next
+ * version. You can enable this to help you prepare the transition to a new
+ * major version by making sure your code is not using these functions.
+ *
+ * This only works with GCC and Clang. With other compilers, you may want to
+ * use MBEDTLS_DEPRECATED_REMOVED
+ *
+ * Uncomment to get warnings on using deprecated functions.
+ */
+//#define MBEDTLS_DEPRECATED_WARNING
+
+/**
+ * \def MBEDTLS_DEPRECATED_REMOVED
+ *
+ * Remove deprecated functions so that they generate an error if used.
+ * Functions deprecated in one version will usually be removed in the next
+ * version. You can enable this to help you prepare the transition to a new
+ * major version by making sure your code is not using these functions.
+ *
+ * Uncomment to get errors on using deprecated functions.
+ */
+//#define MBEDTLS_DEPRECATED_REMOVED
+
+/* \} name SECTION: System support */
+
+/**
+ * \name SECTION: mbed TLS feature support
+ *
+ * This section sets support for features that are or are not needed
+ * within the modules that are enabled.
+ * \{
+ */
+
+/**
+ * \def MBEDTLS_TIMING_ALT
+ *
+ * Uncomment to provide your own alternate implementation for mbedtls_timing_hardclock(),
+ * mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay()
+ *
+ * Only works if you have MBEDTLS_TIMING_C enabled.
+ *
+ * You will need to provide a header "timing_alt.h" and an implementation at
+ * compile time.
+ */
+//#define MBEDTLS_TIMING_ALT
+
+/**
+ * \def MBEDTLS_AES_ALT
+ *
+ * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your
+ * alternate core implementation of a symmetric crypto, an arithmetic or hash
+ * module (e.g. platform specific assembly optimized implementations). Keep
+ * in mind that the function prototypes should remain the same.
+ *
+ * This replaces the whole module. If you only want to replace one of the
+ * functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags.
+ *
+ * Example: In case you uncomment MBEDTLS_AES_ALT, mbed TLS will no longer
+ * provide the "struct mbedtls_aes_context" definition and omit the base
+ * function declarations and implementations. "aes_alt.h" will be included from
+ * "aes.h" to include the new function definitions.
+ *
+ * Uncomment a macro to enable alternate implementation of the corresponding
+ * module.
+ *
+ * \warning   MD2, MD4, MD5, ARC4, DES and SHA-1 are considered weak and their
+ *            use constitutes a security risk. If possible, we recommend
+ *            avoiding dependencies on them, and considering stronger message
+ *            digests and ciphers instead.
+ *
+ */
+//#define MBEDTLS_AES_ALT
+//#define MBEDTLS_ARC4_ALT
+//#define MBEDTLS_BLOWFISH_ALT
+//#define MBEDTLS_CAMELLIA_ALT
+//#define MBEDTLS_CCM_ALT
+//#define MBEDTLS_CMAC_ALT
+//#define MBEDTLS_DES_ALT
+//#define MBEDTLS_DHM_ALT
+//#define MBEDTLS_ECJPAKE_ALT
+//#define MBEDTLS_GCM_ALT
+//#define MBEDTLS_MD2_ALT
+//#define MBEDTLS_MD4_ALT
+//#define MBEDTLS_MD5_ALT
+//#define MBEDTLS_RIPEMD160_ALT
+//#define MBEDTLS_RSA_ALT
+//#define MBEDTLS_SHA1_ALT
+//#define MBEDTLS_SHA256_ALT
+//#define MBEDTLS_SHA512_ALT
+//#define MBEDTLS_XTEA_ALT
+/*
+ * When replacing the elliptic curve module, pleace consider, that it is
+ * implemented with two .c files:
+ *      - ecp.c
+ *      - ecp_curves.c
+ * You can replace them very much like all the other MBEDTLS__MODULE_NAME__ALT
+ * macros as described above. The only difference is that you have to make sure
+ * that you provide functionality for both .c files.
+ */
+//#define MBEDTLS_ECP_ALT
+
+/**
+ * \def MBEDTLS_MD2_PROCESS_ALT
+ *
+ * MBEDTLS__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use you
+ * alternate core implementation of symmetric crypto or hash function. Keep in
+ * mind that function prototypes should remain the same.
+ *
+ * This replaces only one function. The header file from mbed TLS is still
+ * used, in contrast to the MBEDTLS__MODULE_NAME__ALT flags.
+ *
+ * Example: In case you uncomment MBEDTLS_SHA256_PROCESS_ALT, mbed TLS will
+ * no longer provide the mbedtls_sha1_process() function, but it will still provide
+ * the other function (using your mbedtls_sha1_process() function) and the definition
+ * of mbedtls_sha1_context, so your implementation of mbedtls_sha1_process must be compatible
+ * with this definition.
+ *
+ * \note Because of a signature change, the core AES encryption and decryption routines are
+ *       currently named mbedtls_aes_internal_encrypt and mbedtls_aes_internal_decrypt,
+ *       respectively. When setting up alternative implementations, these functions should
+ *       be overriden, but the wrapper functions mbedtls_aes_decrypt and mbedtls_aes_encrypt
+ *       must stay untouched.
+ *
+ * \note If you use the AES_xxx_ALT macros, then is is recommended to also set
+ *       MBEDTLS_AES_ROM_TABLES in order to help the linker garbage-collect the AES
+ *       tables.
+ *
+ * Uncomment a macro to enable alternate implementation of the corresponding
+ * function.
+ *
+ * \warning   MD2, MD4, MD5, DES and SHA-1 are considered weak and their use
+ *            constitutes a security risk. If possible, we recommend avoiding
+ *            dependencies on them, and considering stronger message digests
+ *            and ciphers instead.
+ *
+ */
+//#define MBEDTLS_MD2_PROCESS_ALT
+//#define MBEDTLS_MD4_PROCESS_ALT
+//#define MBEDTLS_MD5_PROCESS_ALT
+//#define MBEDTLS_RIPEMD160_PROCESS_ALT
+//#define MBEDTLS_SHA1_PROCESS_ALT
+//#define MBEDTLS_SHA256_PROCESS_ALT
+//#define MBEDTLS_SHA512_PROCESS_ALT
+//#define MBEDTLS_DES_SETKEY_ALT
+//#define MBEDTLS_DES_CRYPT_ECB_ALT
+//#define MBEDTLS_DES3_CRYPT_ECB_ALT
+//#define MBEDTLS_AES_SETKEY_ENC_ALT
+//#define MBEDTLS_AES_SETKEY_DEC_ALT
+//#define MBEDTLS_AES_ENCRYPT_ALT
+//#define MBEDTLS_AES_DECRYPT_ALT
+//#define MBEDTLS_ECDH_GEN_PUBLIC_ALT
+//#define MBEDTLS_ECDH_COMPUTE_SHARED_ALT
+//#define MBEDTLS_ECDSA_VERIFY_ALT
+//#define MBEDTLS_ECDSA_SIGN_ALT
+//#define MBEDTLS_ECDSA_GENKEY_ALT
+
+/**
+ * \def MBEDTLS_ECP_INTERNAL_ALT
+ *
+ * Expose a part of the internal interface of the Elliptic Curve Point module.
+ *
+ * MBEDTLS_ECP__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use your
+ * alternative core implementation of elliptic curve arithmetic. Keep in mind
+ * that function prototypes should remain the same.
+ *
+ * This partially replaces one function. The header file from mbed TLS is still
+ * used, in contrast to the MBEDTLS_ECP_ALT flag. The original implementation
+ * is still present and it is used for group structures not supported by the
+ * alternative.
+ *
+ * Any of these options become available by defining MBEDTLS_ECP_INTERNAL_ALT
+ * and implementing the following functions:
+ *      unsigned char mbedtls_internal_ecp_grp_capable(
+ *          const mbedtls_ecp_group *grp )
+ *      int  mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp )
+ *      void mbedtls_internal_ecp_deinit( const mbedtls_ecp_group *grp )
+ * The mbedtls_internal_ecp_grp_capable function should return 1 if the
+ * replacement functions implement arithmetic for the given group and 0
+ * otherwise.
+ * The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_deinit are
+ * called before and after each point operation and provide an opportunity to
+ * implement optimized set up and tear down instructions.
+ *
+ * Example: In case you uncomment MBEDTLS_ECP_INTERNAL_ALT and
+ * MBEDTLS_ECP_DOUBLE_JAC_ALT, mbed TLS will still provide the ecp_double_jac
+ * function, but will use your mbedtls_internal_ecp_double_jac if the group is
+ * supported (your mbedtls_internal_ecp_grp_capable function returns 1 when
+ * receives it as an argument). If the group is not supported then the original
+ * implementation is used. The other functions and the definition of
+ * mbedtls_ecp_group and mbedtls_ecp_point will not change, so your
+ * implementation of mbedtls_internal_ecp_double_jac and
+ * mbedtls_internal_ecp_grp_capable must be compatible with this definition.
+ *
+ * Uncomment a macro to enable alternate implementation of the corresponding
+ * function.
+ */
+/* Required for all the functions in this section */
+//#define MBEDTLS_ECP_INTERNAL_ALT
+/* Support for Weierstrass curves with Jacobi representation */
+//#define MBEDTLS_ECP_RANDOMIZE_JAC_ALT
+//#define MBEDTLS_ECP_ADD_MIXED_ALT
+//#define MBEDTLS_ECP_DOUBLE_JAC_ALT
+//#define MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT
+//#define MBEDTLS_ECP_NORMALIZE_JAC_ALT
+/* Support for curves with Montgomery arithmetic */
+//#define MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT
+//#define MBEDTLS_ECP_RANDOMIZE_MXZ_ALT
+//#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT
+
+/**
+ * \def MBEDTLS_TEST_NULL_ENTROPY
+ *
+ * Enables testing and use of mbed TLS without any configured entropy sources.
+ * This permits use of the library on platforms before an entropy source has
+ * been integrated (see for example the MBEDTLS_ENTROPY_HARDWARE_ALT or the
+ * MBEDTLS_ENTROPY_NV_SEED switches).
+ *
+ * WARNING! This switch MUST be disabled in production builds, and is suitable
+ * only for development.
+ * Enabling the switch negates any security provided by the library.
+ *
+ * Requires MBEDTLS_ENTROPY_C, MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
+ *
+ */
+//#define MBEDTLS_TEST_NULL_ENTROPY
+
+/**
+ * \def MBEDTLS_ENTROPY_HARDWARE_ALT
+ *
+ * Uncomment this macro to let mbed TLS use your own implementation of a
+ * hardware entropy collector.
+ *
+ * Your function must be called \c mbedtls_hardware_poll(), have the same
+ * prototype as declared in entropy_poll.h, and accept NULL as first argument.
+ *
+ * Uncomment to use your own hardware entropy collector.
+ */
+//#define MBEDTLS_ENTROPY_HARDWARE_ALT
+
+/**
+ * \def MBEDTLS_AES_ROM_TABLES
+ *
+ * Use precomputed AES tables stored in ROM.
+ *
+ * Uncomment this macro to use precomputed AES tables stored in ROM.
+ * Comment this macro to generate AES tables in RAM at runtime.
+ *
+ * Tradeoff: Using precomputed ROM tables reduces RAM usage by ~8kb
+ * (or ~2kb if \c MBEDTLS_AES_FEWER_TABLES is used) and reduces the
+ * initialization time before the first AES operation can be performed.
+ * It comes at the cost of additional ~8kb ROM use (resp. ~2kb if \c
+ * MBEDTLS_AES_FEWER_TABLES below is used), and potentially degraded
+ * performance if ROM access is slower than RAM access.
+ *
+ * This option is independent of \c MBEDTLS_AES_FEWER_TABLES.
+ *
+ */
+//#define MBEDTLS_AES_ROM_TABLES
+
+/**
+ * \def MBEDTLS_AES_FEWER_TABLES
+ *
+ * Use less ROM/RAM for AES tables.
+ *
+ * Uncommenting this macro omits 75% of the AES tables from
+ * ROM / RAM (depending on the value of \c MBEDTLS_AES_ROM_TABLES)
+ * by computing their values on the fly during operations
+ * (the tables are entry-wise rotations of one another).
+ *
+ * Tradeoff: Uncommenting this reduces the RAM / ROM footprint
+ * by ~6kb but at the cost of more arithmetic operations during
+ * runtime. Specifically, one has to compare 4 accesses within
+ * different tables to 4 accesses with additional arithmetic
+ * operations within the same table. The performance gain/loss
+ * depends on the system and memory details.
+ *
+ * This option is independent of \c MBEDTLS_AES_ROM_TABLES.
+ *
+ */
+//#define MBEDTLS_AES_FEWER_TABLES
+
+/**
+ * \def MBEDTLS_CAMELLIA_SMALL_MEMORY
+ *
+ * Use less ROM for the Camellia implementation (saves about 768 bytes).
+ *
+ * Uncomment this macro to use less memory for Camellia.
+ */
+//#define MBEDTLS_CAMELLIA_SMALL_MEMORY
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_CBC
+ *
+ * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_CBC
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_CFB
+ *
+ * Enable Cipher Feedback mode (CFB) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_CFB
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_CTR
+ *
+ * Enable Counter Block Cipher mode (CTR) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_CTR
+
+/**
+ * \def MBEDTLS_CIPHER_NULL_CIPHER
+ *
+ * Enable NULL cipher.
+ * Warning: Only do so when you know what you are doing. This allows for
+ * encryption or channels without any security!
+ *
+ * Requires MBEDTLS_ENABLE_WEAK_CIPHERSUITES as well to enable
+ * the following ciphersuites:
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA
+ *      MBEDTLS_TLS_RSA_WITH_NULL_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_NULL_SHA
+ *      MBEDTLS_TLS_RSA_WITH_NULL_MD5
+ *      MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA
+ *      MBEDTLS_TLS_PSK_WITH_NULL_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_NULL_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_NULL_SHA
+ *
+ * Uncomment this macro to enable the NULL cipher and ciphersuites
+ */
+//#define MBEDTLS_CIPHER_NULL_CIPHER
+
+/**
+ * \def MBEDTLS_CIPHER_PADDING_PKCS7
+ *
+ * MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for
+ * specific padding modes in the cipher layer with cipher modes that support
+ * padding (e.g. CBC)
+ *
+ * If you disable all padding modes, only full blocks can be used with CBC.
+ *
+ * Enable padding modes in the cipher layer.
+ */
+#define MBEDTLS_CIPHER_PADDING_PKCS7
+#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS
+#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN
+#define MBEDTLS_CIPHER_PADDING_ZEROS
+
+/**
+ * \def MBEDTLS_ENABLE_WEAK_CIPHERSUITES
+ *
+ * Enable weak ciphersuites in SSL / TLS.
+ * Warning: Only do so when you know what you are doing. This allows for
+ * channels with virtually no security at all!
+ *
+ * This enables the following ciphersuites:
+ *      MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA
+ *
+ * Uncomment this macro to enable weak ciphersuites
+ *
+ * \warning   DES is considered a weak cipher and its use constitutes a
+ *            security risk. We recommend considering stronger ciphers instead.
+ */
+//#define MBEDTLS_ENABLE_WEAK_CIPHERSUITES
+
+/**
+ * \def MBEDTLS_REMOVE_ARC4_CIPHERSUITES
+ *
+ * Remove RC4 ciphersuites by default in SSL / TLS.
+ * This flag removes the ciphersuites based on RC4 from the default list as
+ * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible to
+ * enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including them
+ * explicitly.
+ *
+ * Uncomment this macro to remove RC4 ciphersuites by default.
+ */
+#define MBEDTLS_REMOVE_ARC4_CIPHERSUITES
+
+/**
+ * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED
+ *
+ * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve
+ * module.  By default all supported curves are enabled.
+ *
+ * Comment macros to disable the curve and functions for it
+ */
+#define MBEDTLS_ECP_DP_SECP192R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP224R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP256R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP384R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP521R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP192K1_ENABLED
+#define MBEDTLS_ECP_DP_SECP224K1_ENABLED
+#define MBEDTLS_ECP_DP_SECP256K1_ENABLED
+#define MBEDTLS_ECP_DP_BP256R1_ENABLED
+#define MBEDTLS_ECP_DP_BP384R1_ENABLED
+#define MBEDTLS_ECP_DP_BP512R1_ENABLED
+#define MBEDTLS_ECP_DP_CURVE25519_ENABLED
+#define MBEDTLS_ECP_DP_CURVE448_ENABLED
+
+/**
+ * \def MBEDTLS_ECP_NIST_OPTIM
+ *
+ * Enable specific 'modulo p' routines for each NIST prime.
+ * Depending on the prime and architecture, makes operations 4 to 8 times
+ * faster on the corresponding curve.
+ *
+ * Comment this macro to disable NIST curves optimisation.
+ */
+#define MBEDTLS_ECP_NIST_OPTIM
+
+/**
+ * \def MBEDTLS_ECDSA_DETERMINISTIC
+ *
+ * Enable deterministic ECDSA (RFC 6979).
+ * Standard ECDSA is "fragile" in the sense that lack of entropy when signing
+ * may result in a compromise of the long-term signing key. This is avoided by
+ * the deterministic variant.
+ *
+ * Requires: MBEDTLS_HMAC_DRBG_C
+ *
+ * Comment this macro to disable deterministic ECDSA.
+ */
+#define MBEDTLS_ECDSA_DETERMINISTIC
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
+ *
+ * Enable the PSK based ciphersuite modes in SSL / TLS.
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_PSK_WITH_RC4_128_SHA
+ */
+#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+ *
+ * Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_DHM_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA
+ *
+ * \warning    Using DHE constitutes a security risk as it
+ *             is not possible to validate custom DH parameters.
+ *             If possible, it is recommended users should consider
+ *             preferring other methods of key exchange.
+ *             See dhm.h for more details.
+ *
+ */
+#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+ *
+ * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
+ *
+ * Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ *           MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA
+ */
+#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+ *
+ * Enable the RSA-only based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ *           MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_RSA_WITH_RC4_128_MD5
+ */
+#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+ *
+ * Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ *           MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
+ *
+ * \warning    Using DHE constitutes a security risk as it
+ *             is not possible to validate custom DH parameters.
+ *             If possible, it is recommended users should consider
+ *             preferring other methods of key exchange.
+ *             See dhm.h for more details.
+ *
+ */
+#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+ *
+ * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ *           MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+ *
+ * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C,
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+ *
+ * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+ *
+ * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+ *
+ * Enable the ECJPAKE based ciphersuite modes in SSL / TLS.
+ *
+ * \warning This is currently experimental. EC J-PAKE support is based on the
+ * Thread v1.0.0 specification; incompatible changes to the specification
+ * might still happen. For this reason, this is disabled by default.
+ *
+ * Requires: MBEDTLS_ECJPAKE_C
+ *           MBEDTLS_SHA256_C
+ *           MBEDTLS_ECP_DP_SECP256R1_ENABLED
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8
+ */
+//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+
+/**
+ * \def MBEDTLS_PK_PARSE_EC_EXTENDED
+ *
+ * Enhance support for reading EC keys using variants of SEC1 not allowed by
+ * RFC 5915 and RFC 5480.
+ *
+ * Currently this means parsing the SpecifiedECDomain choice of EC
+ * parameters (only known groups are supported, not arbitrary domains, to
+ * avoid validation issues).
+ *
+ * Disable if you only need to support RFC 5915 + 5480 key formats.
+ */
+#define MBEDTLS_PK_PARSE_EC_EXTENDED
+
+/**
+ * \def MBEDTLS_ERROR_STRERROR_DUMMY
+ *
+ * Enable a dummy error function to make use of mbedtls_strerror() in
+ * third party libraries easier when MBEDTLS_ERROR_C is disabled
+ * (no effect when MBEDTLS_ERROR_C is enabled).
+ *
+ * You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're
+ * not using mbedtls_strerror() or error_strerror() in your application.
+ *
+ * Disable if you run into name conflicts and want to really remove the
+ * mbedtls_strerror()
+ */
+#define MBEDTLS_ERROR_STRERROR_DUMMY
+
+/**
+ * \def MBEDTLS_GENPRIME
+ *
+ * Enable the prime-number generation code.
+ *
+ * Requires: MBEDTLS_BIGNUM_C
+ */
+#define MBEDTLS_GENPRIME
+
+/**
+ * \def MBEDTLS_FS_IO
+ *
+ * Enable functions that use the filesystem.
+ */
+#define MBEDTLS_FS_IO
+
+/**
+ * \def MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
+ *
+ * Do not add default entropy sources. These are the platform specific,
+ * mbedtls_timing_hardclock and HAVEGE based poll functions.
+ *
+ * This is useful to have more control over the added entropy sources in an
+ * application.
+ *
+ * Uncomment this macro to prevent loading of default entropy functions.
+ */
+//#define MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
+
+/**
+ * \def MBEDTLS_NO_PLATFORM_ENTROPY
+ *
+ * Do not use built-in platform entropy functions.
+ * This is useful if your platform does not support
+ * standards like the /dev/urandom or Windows CryptoAPI.
+ *
+ * Uncomment this macro to disable the built-in platform entropy functions.
+ */
+//#define MBEDTLS_NO_PLATFORM_ENTROPY
+
+/**
+ * \def MBEDTLS_ENTROPY_FORCE_SHA256
+ *
+ * Force the entropy accumulator to use a SHA-256 accumulator instead of the
+ * default SHA-512 based one (if both are available).
+ *
+ * Requires: MBEDTLS_SHA256_C
+ *
+ * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option
+ * if you have performance concerns.
+ *
+ * This option is only useful if both MBEDTLS_SHA256_C and
+ * MBEDTLS_SHA512_C are defined. Otherwise the available hash module is used.
+ */
+//#define MBEDTLS_ENTROPY_FORCE_SHA256
+
+/**
+ * \def MBEDTLS_ENTROPY_NV_SEED
+ *
+ * Enable the non-volatile (NV) seed file-based entropy source.
+ * (Also enables the NV seed read/write functions in the platform layer)
+ *
+ * This is crucial (if not required) on systems that do not have a
+ * cryptographic entropy source (in hardware or kernel) available.
+ *
+ * Requires: MBEDTLS_ENTROPY_C, MBEDTLS_PLATFORM_C
+ *
+ * \note The read/write functions that are used by the entropy source are
+ *       determined in the platform layer, and can be modified at runtime and/or
+ *       compile-time depending on the flags (MBEDTLS_PLATFORM_NV_SEED_*) used.
+ *
+ * \note If you use the default implementation functions that read a seedfile
+ *       with regular fopen(), please make sure you make a seedfile with the
+ *       proper name (defined in MBEDTLS_PLATFORM_STD_NV_SEED_FILE) and at
+ *       least MBEDTLS_ENTROPY_BLOCK_SIZE bytes in size that can be read from
+ *       and written to or you will get an entropy source error! The default
+ *       implementation will only use the first MBEDTLS_ENTROPY_BLOCK_SIZE
+ *       bytes from the file.
+ *
+ * \note The entropy collector will write to the seed file before entropy is
+ *       given to an external source, to update it.
+ */
+//#define MBEDTLS_ENTROPY_NV_SEED
+
+/**
+ * \def MBEDTLS_MEMORY_DEBUG
+ *
+ * Enable debugging of buffer allocator memory issues. Automatically prints
+ * (to stderr) all (fatal) messages on memory allocation issues. Enables
+ * function for 'debug output' of allocated memory.
+ *
+ * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C
+ *
+ * Uncomment this macro to let the buffer allocator print out error messages.
+ */
+//#define MBEDTLS_MEMORY_DEBUG
+
+/**
+ * \def MBEDTLS_MEMORY_BACKTRACE
+ *
+ * Include backtrace information with each allocated block.
+ *
+ * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C
+ *           GLIBC-compatible backtrace() an backtrace_symbols() support
+ *
+ * Uncomment this macro to include backtrace information
+ */
+//#define MBEDTLS_MEMORY_BACKTRACE
+
+/**
+ * \def MBEDTLS_PK_RSA_ALT_SUPPORT
+ *
+ * Support external private RSA keys (eg from a HSM) in the PK layer.
+ *
+ * Comment this macro to disable support for external private RSA keys.
+ */
+#define MBEDTLS_PK_RSA_ALT_SUPPORT
+
+/**
+ * \def MBEDTLS_PKCS1_V15
+ *
+ * Enable support for PKCS#1 v1.5 encoding.
+ *
+ * Requires: MBEDTLS_RSA_C
+ *
+ * This enables support for PKCS#1 v1.5 operations.
+ */
+#define MBEDTLS_PKCS1_V15
+
+/**
+ * \def MBEDTLS_PKCS1_V21
+ *
+ * Enable support for PKCS#1 v2.1 encoding.
+ *
+ * Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C
+ *
+ * This enables support for RSAES-OAEP and RSASSA-PSS operations.
+ */
+#define MBEDTLS_PKCS1_V21
+
+/**
+ * \def MBEDTLS_RSA_NO_CRT
+ *
+ * Do not use the Chinese Remainder Theorem
+ * for the RSA private operation.
+ *
+ * Uncomment this macro to disable the use of CRT in RSA.
+ *
+ */
+//#define MBEDTLS_RSA_NO_CRT
+
+/**
+ * \def MBEDTLS_SELF_TEST
+ *
+ * Enable the checkup functions (*_self_test).
+ */
+#define MBEDTLS_SELF_TEST
+
+/**
+ * \def MBEDTLS_SHA256_SMALLER
+ *
+ * Enable an implementation of SHA-256 that has lower ROM footprint but also
+ * lower performance.
+ *
+ * The default implementation is meant to be a reasonnable compromise between
+ * performance and size. This version optimizes more aggressively for size at
+ * the expense of performance. Eg on Cortex-M4 it reduces the size of
+ * mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about
+ * 30%.
+ *
+ * Uncomment to enable the smaller implementation of SHA256.
+ */
+//#define MBEDTLS_SHA256_SMALLER
+
+/**
+ * \def MBEDTLS_SSL_ALL_ALERT_MESSAGES
+ *
+ * Enable sending of alert messages in case of encountered errors as per RFC.
+ * If you choose not to send the alert messages, mbed TLS can still communicate
+ * with other servers, only debugging of failures is harder.
+ *
+ * The advantage of not sending alert messages, is that no information is given
+ * about reasons for failures thus preventing adversaries of gaining intel.
+ *
+ * Enable sending of all alert messages
+ */
+#define MBEDTLS_SSL_ALL_ALERT_MESSAGES
+
+/**
+ * \def MBEDTLS_SSL_DEBUG_ALL
+ *
+ * Enable the debug messages in SSL module for all issues.
+ * Debug messages have been disabled in some places to prevent timing
+ * attacks due to (unbalanced) debugging function calls.
+ *
+ * If you need all error reporting you should enable this during debugging,
+ * but remove this for production servers that should log as well.
+ *
+ * Uncomment this macro to report all debug messages on errors introducing
+ * a timing side-channel.
+ *
+ */
+//#define MBEDTLS_SSL_DEBUG_ALL
+
+/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC
+ *
+ * Enable support for Encrypt-then-MAC, RFC 7366.
+ *
+ * This allows peers that both support it to use a more robust protection for
+ * ciphersuites using CBC, providing deep resistance against timing attacks
+ * on the padding or underlying cipher.
+ *
+ * This only affects CBC ciphersuites, and is useless if none is defined.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1    or
+ *           MBEDTLS_SSL_PROTO_TLS1_1  or
+ *           MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Comment this macro to disable support for Encrypt-then-MAC
+ */
+#define MBEDTLS_SSL_ENCRYPT_THEN_MAC
+
+/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET
+ *
+ * Enable support for Extended Master Secret, aka Session Hash
+ * (draft-ietf-tls-session-hash-02).
+ *
+ * This was introduced as "the proper fix" to the Triple Handshake familiy of
+ * attacks, but it is recommended to always use it (even if you disable
+ * renegotiation), since it actually fixes a more fundamental issue in the
+ * original SSL/TLS design, and has implications beyond Triple Handshake.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1    or
+ *           MBEDTLS_SSL_PROTO_TLS1_1  or
+ *           MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Comment this macro to disable support for Extended Master Secret.
+ */
+#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET
+
+/**
+ * \def MBEDTLS_SSL_FALLBACK_SCSV
+ *
+ * Enable support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv-00).
+ *
+ * For servers, it is recommended to always enable this, unless you support
+ * only one version of TLS, or know for sure that none of your clients
+ * implements a fallback strategy.
+ *
+ * For clients, you only need this if you're using a fallback strategy, which
+ * is not recommended in the first place, unless you absolutely need it to
+ * interoperate with buggy (version-intolerant) servers.
+ *
+ * Comment this macro to disable support for FALLBACK_SCSV
+ */
+#define MBEDTLS_SSL_FALLBACK_SCSV
+
+/**
+ * \def MBEDTLS_SSL_HW_RECORD_ACCEL
+ *
+ * Enable hooking functions in SSL module for hardware acceleration of
+ * individual records.
+ *
+ * Uncomment this macro to enable hooking functions.
+ */
+//#define MBEDTLS_SSL_HW_RECORD_ACCEL
+
+/**
+ * \def MBEDTLS_SSL_CBC_RECORD_SPLITTING
+ *
+ * Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0.
+ *
+ * This is a countermeasure to the BEAST attack, which also minimizes the risk
+ * of interoperability issues compared to sending 0-length records.
+ *
+ * Comment this macro to disable 1/n-1 record splitting.
+ */
+#define MBEDTLS_SSL_CBC_RECORD_SPLITTING
+
+/**
+ * \def MBEDTLS_SSL_RENEGOTIATION
+ *
+ * Disable support for TLS renegotiation.
+ *
+ * The two main uses of renegotiation are (1) refresh keys on long-lived
+ * connections and (2) client authentication after the initial handshake.
+ * If you don't need renegotiation, it's probably better to disable it, since
+ * it has been associated with security issues in the past and is easy to
+ * misuse/misunderstand.
+ *
+ * Comment this to disable support for renegotiation.
+ *
+ * \note   Even if this option is disabled, both client and server are aware
+ *         of the Renegotiation Indication Extension (RFC 5746) used to
+ *         prevent the SSL renegotiation attack (see RFC 5746 Sect. 1).
+ *         (See \c mbedtls_ssl_conf_legacy_renegotiation for the
+ *          configuration of this extension).
+ *
+ */
+#define MBEDTLS_SSL_RENEGOTIATION
+
+/**
+ * \def MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
+ *
+ * Enable support for receiving and parsing SSLv2 Client Hello messages for the
+ * SSL Server module (MBEDTLS_SSL_SRV_C).
+ *
+ * Uncomment this macro to enable support for SSLv2 Client Hello messages.
+ */
+//#define MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
+
+/**
+ * \def MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE
+ *
+ * Pick the ciphersuite according to the client's preferences rather than ours
+ * in the SSL Server module (MBEDTLS_SSL_SRV_C).
+ *
+ * Uncomment this macro to respect client's ciphersuite order
+ */
+//#define MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE
+
+/**
+ * \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+ *
+ * Enable support for RFC 6066 max_fragment_length extension in SSL.
+ *
+ * Comment this macro to disable support for the max_fragment_length extension
+ */
+#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+
+/**
+ * \def MBEDTLS_SSL_PROTO_SSL3
+ *
+ * Enable support for SSL 3.0.
+ *
+ * Requires: MBEDTLS_MD5_C
+ *           MBEDTLS_SHA1_C
+ *
+ * Comment this macro to disable support for SSL 3.0
+ */
+//#define MBEDTLS_SSL_PROTO_SSL3
+
+/**
+ * \def MBEDTLS_SSL_PROTO_TLS1
+ *
+ * Enable support for TLS 1.0.
+ *
+ * Requires: MBEDTLS_MD5_C
+ *           MBEDTLS_SHA1_C
+ *
+ * Comment this macro to disable support for TLS 1.0
+ */
+#define MBEDTLS_SSL_PROTO_TLS1
+
+/**
+ * \def MBEDTLS_SSL_PROTO_TLS1_1
+ *
+ * Enable support for TLS 1.1 (and DTLS 1.0 if DTLS is enabled).
+ *
+ * Requires: MBEDTLS_MD5_C
+ *           MBEDTLS_SHA1_C
+ *
+ * Comment this macro to disable support for TLS 1.1 / DTLS 1.0
+ */
+#define MBEDTLS_SSL_PROTO_TLS1_1
+
+/**
+ * \def MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled).
+ *
+ * Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C
+ *           (Depends on ciphersuites)
+ *
+ * Comment this macro to disable support for TLS 1.2 / DTLS 1.2
+ */
+#define MBEDTLS_SSL_PROTO_TLS1_2
+
+/**
+ * \def MBEDTLS_SSL_PROTO_DTLS
+ *
+ * Enable support for DTLS (all available versions).
+ *
+ * Enable this and MBEDTLS_SSL_PROTO_TLS1_1 to enable DTLS 1.0,
+ * and/or this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1_1
+ *        or MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Comment this macro to disable support for DTLS
+ */
+#define MBEDTLS_SSL_PROTO_DTLS
+
+/**
+ * \def MBEDTLS_SSL_ALPN
+ *
+ * Enable support for RFC 7301 Application Layer Protocol Negotiation.
+ *
+ * Comment this macro to disable support for ALPN.
+ */
+#define MBEDTLS_SSL_ALPN
+
+/**
+ * \def MBEDTLS_SSL_DTLS_ANTI_REPLAY
+ *
+ * Enable support for the anti-replay mechanism in DTLS.
+ *
+ * Requires: MBEDTLS_SSL_TLS_C
+ *           MBEDTLS_SSL_PROTO_DTLS
+ *
+ * \warning Disabling this is often a security risk!
+ * See mbedtls_ssl_conf_dtls_anti_replay() for details.
+ *
+ * Comment this to disable anti-replay in DTLS.
+ */
+#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
+
+/**
+ * \def MBEDTLS_SSL_DTLS_HELLO_VERIFY
+ *
+ * Enable support for HelloVerifyRequest on DTLS servers.
+ *
+ * This feature is highly recommended to prevent DTLS servers being used as
+ * amplifiers in DoS attacks against other hosts. It should always be enabled
+ * unless you know for sure amplification cannot be a problem in the
+ * environment in which your server operates.
+ *
+ * \warning Disabling this can ba a security risk! (see above)
+ *
+ * Requires: MBEDTLS_SSL_PROTO_DTLS
+ *
+ * Comment this to disable support for HelloVerifyRequest.
+ */
+#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
+
+/**
+ * \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
+ *
+ * Enable server-side support for clients that reconnect from the same port.
+ *
+ * Some clients unexpectedly close the connection and try to reconnect using the
+ * same source port. This needs special support from the server to handle the
+ * new connection securely, as described in section 4.2.8 of RFC 6347. This
+ * flag enables that support.
+ *
+ * Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY
+ *
+ * Comment this to disable support for clients reusing the source port.
+ */
+#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
+
+/**
+ * \def MBEDTLS_SSL_DTLS_BADMAC_LIMIT
+ *
+ * Enable support for a limit of records with bad MAC.
+ *
+ * See mbedtls_ssl_conf_dtls_badmac_limit().
+ *
+ * Requires: MBEDTLS_SSL_PROTO_DTLS
+ */
+#define MBEDTLS_SSL_DTLS_BADMAC_LIMIT
+
+/**
+ * \def MBEDTLS_SSL_SESSION_TICKETS
+ *
+ * Enable support for RFC 5077 session tickets in SSL.
+ * Client-side, provides full support for session tickets (maintainance of a
+ * session store remains the responsibility of the application, though).
+ * Server-side, you also need to provide callbacks for writing and parsing
+ * tickets, including authenticated encryption and key management. Example
+ * callbacks are provided by MBEDTLS_SSL_TICKET_C.
+ *
+ * Comment this macro to disable support for SSL session tickets
+ */
+#define MBEDTLS_SSL_SESSION_TICKETS
+
+/**
+ * \def MBEDTLS_SSL_EXPORT_KEYS
+ *
+ * Enable support for exporting key block and master secret.
+ * This is required for certain users of TLS, e.g. EAP-TLS.
+ *
+ * Comment this macro to disable support for key export
+ */
+#define MBEDTLS_SSL_EXPORT_KEYS
+
+/**
+ * \def MBEDTLS_SSL_SERVER_NAME_INDICATION
+ *
+ * Enable support for RFC 6066 server name indication (SNI) in SSL.
+ *
+ * Requires: MBEDTLS_X509_CRT_PARSE_C
+ *
+ * Comment this macro to disable support for server name indication in SSL
+ */
+#define MBEDTLS_SSL_SERVER_NAME_INDICATION
+
+/**
+ * \def MBEDTLS_SSL_TRUNCATED_HMAC
+ *
+ * Enable support for RFC 6066 truncated HMAC in SSL.
+ *
+ * Comment this macro to disable support for truncated HMAC in SSL
+ */
+#define MBEDTLS_SSL_TRUNCATED_HMAC
+
+/**
+ * \def MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT
+ *
+ * Fallback to old (pre-2.7), non-conforming implementation of the truncated
+ * HMAC extension which also truncates the HMAC key. Note that this option is
+ * only meant for a transitory upgrade period and is likely to be removed in
+ * a future version of the library.
+ *
+ * \warning The old implementation is non-compliant and has a security weakness
+ *          (2^80 brute force attack on the HMAC key used for a single,
+ *          uninterrupted connection). This should only be enabled temporarily
+ *          when (1) the use of truncated HMAC is essential in order to save
+ *          bandwidth, and (2) the peer is an Mbed TLS stack that doesn't use
+ *          the fixed implementation yet (pre-2.7).
+ *
+ * \deprecated This option is deprecated and will likely be removed in a
+ *             future version of Mbed TLS.
+ *
+ * Uncomment to fallback to old, non-compliant truncated HMAC implementation.
+ *
+ * Requires: MBEDTLS_SSL_TRUNCATED_HMAC
+ */
+//#define MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT
+
+/**
+ * \def MBEDTLS_THREADING_ALT
+ *
+ * Provide your own alternate threading implementation.
+ *
+ * Requires: MBEDTLS_THREADING_C
+ *
+ * Uncomment this to allow your own alternate threading implementation.
+ */
+//#define MBEDTLS_THREADING_ALT
+
+/**
+ * \def MBEDTLS_THREADING_PTHREAD
+ *
+ * Enable the pthread wrapper layer for the threading layer.
+ *
+ * Requires: MBEDTLS_THREADING_C
+ *
+ * Uncomment this to enable pthread mutexes.
+ */
+//#define MBEDTLS_THREADING_PTHREAD
+
+/**
+ * \def MBEDTLS_VERSION_FEATURES
+ *
+ * Allow run-time checking of compile-time enabled features. Thus allowing users
+ * to check at run-time if the library is for instance compiled with threading
+ * support via mbedtls_version_check_feature().
+ *
+ * Requires: MBEDTLS_VERSION_C
+ *
+ * Comment this to disable run-time checking and save ROM space
+ */
+#define MBEDTLS_VERSION_FEATURES
+
+/**
+ * \def MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3
+ *
+ * If set, the X509 parser will not break-off when parsing an X509 certificate
+ * and encountering an extension in a v1 or v2 certificate.
+ *
+ * Uncomment to prevent an error.
+ */
+//#define MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3
+
+/**
+ * \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
+ *
+ * If set, the X509 parser will not break-off when parsing an X509 certificate
+ * and encountering an unknown critical extension.
+ *
+ * \warning Depending on your PKI use, enabling this can be a security risk!
+ *
+ * Uncomment to prevent an error.
+ */
+//#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
+
+/**
+ * \def MBEDTLS_X509_CHECK_KEY_USAGE
+ *
+ * Enable verification of the keyUsage extension (CA and leaf certificates).
+ *
+ * Disabling this avoids problems with mis-issued and/or misused
+ * (intermediate) CA and leaf certificates.
+ *
+ * \warning Depending on your PKI use, disabling this can be a security risk!
+ *
+ * Comment to skip keyUsage checking for both CA and leaf certificates.
+ */
+#define MBEDTLS_X509_CHECK_KEY_USAGE
+
+/**
+ * \def MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE
+ *
+ * Enable verification of the extendedKeyUsage extension (leaf certificates).
+ *
+ * Disabling this avoids problems with mis-issued and/or misused certificates.
+ *
+ * \warning Depending on your PKI use, disabling this can be a security risk!
+ *
+ * Comment to skip extendedKeyUsage checking for certificates.
+ */
+#define MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE
+
+/**
+ * \def MBEDTLS_X509_RSASSA_PSS_SUPPORT
+ *
+ * Enable parsing and verification of X.509 certificates, CRLs and CSRS
+ * signed with RSASSA-PSS (aka PKCS#1 v2.1).
+ *
+ * Comment this macro to disallow using RSASSA-PSS in certificates.
+ */
+#define MBEDTLS_X509_RSASSA_PSS_SUPPORT
+
+/**
+ * \def MBEDTLS_ZLIB_SUPPORT
+ *
+ * If set, the SSL/TLS module uses ZLIB to support compression and
+ * decompression of packet data.
+ *
+ * \warning TLS-level compression MAY REDUCE SECURITY! See for example the
+ * CRIME attack. Before enabling this option, you should examine with care if
+ * CRIME or similar exploits may be a applicable to your use case.
+ *
+ * \note Currently compression can't be used with DTLS.
+ *
+ * \deprecated This feature is deprecated and will be removed
+ *             in the next major revision of the library.
+ *
+ * Used in: library/ssl_tls.c
+ *          library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * This feature requires zlib library and headers to be present.
+ *
+ * Uncomment to enable use of ZLIB
+ */
+//#define MBEDTLS_ZLIB_SUPPORT
+/* \} name SECTION: mbed TLS feature support */
+
+/**
+ * \name SECTION: mbed TLS modules
+ *
+ * This section enables or disables entire modules in mbed TLS
+ * \{
+ */
+
+/**
+ * \def MBEDTLS_AESNI_C
+ *
+ * Enable AES-NI support on x86-64.
+ *
+ * Module:  library/aesni.c
+ * Caller:  library/aes.c
+ *
+ * Requires: MBEDTLS_HAVE_ASM
+ *
+ * This modules adds support for the AES-NI instructions on x86-64
+ */
+#define MBEDTLS_AESNI_C
+
+/**
+ * \def MBEDTLS_AES_C
+ *
+ * Enable the AES block cipher.
+ *
+ * Module:  library/aes.c
+ * Caller:  library/ssl_tls.c
+ *          library/pem.c
+ *          library/ctr_drbg.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
+ *
+ * PEM_PARSE uses AES for decrypting encrypted keys.
+ */
+#define MBEDTLS_AES_C
+
+/**
+ * \def MBEDTLS_ARC4_C
+ *
+ * Enable the ARCFOUR stream cipher.
+ *
+ * Module:  library/arc4.c
+ * Caller:  library/ssl_tls.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_RSA_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_RSA_WITH_RC4_128_MD5
+ *      MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA
+ *      MBEDTLS_TLS_PSK_WITH_RC4_128_SHA
+ *
+ * \warning   ARC4 is considered a weak cipher and its use constitutes a
+ *            security risk. If possible, we recommend avoidng dependencies on
+ *            it, and considering stronger ciphers instead.
+ *
+ */
+#define MBEDTLS_ARC4_C
+
+/**
+ * \def MBEDTLS_ASN1_PARSE_C
+ *
+ * Enable the generic ASN1 parser.
+ *
+ * Module:  library/asn1.c
+ * Caller:  library/x509.c
+ *          library/dhm.c
+ *          library/pkcs12.c
+ *          library/pkcs5.c
+ *          library/pkparse.c
+ */
+#define MBEDTLS_ASN1_PARSE_C
+
+/**
+ * \def MBEDTLS_ASN1_WRITE_C
+ *
+ * Enable the generic ASN1 writer.
+ *
+ * Module:  library/asn1write.c
+ * Caller:  library/ecdsa.c
+ *          library/pkwrite.c
+ *          library/x509_create.c
+ *          library/x509write_crt.c
+ *          library/x509write_csr.c
+ */
+#define MBEDTLS_ASN1_WRITE_C
+
+/**
+ * \def MBEDTLS_BASE64_C
+ *
+ * Enable the Base64 module.
+ *
+ * Module:  library/base64.c
+ * Caller:  library/pem.c
+ *
+ * This module is required for PEM support (required by X.509).
+ */
+#define MBEDTLS_BASE64_C
+
+/**
+ * \def MBEDTLS_BIGNUM_C
+ *
+ * Enable the multi-precision integer library.
+ *
+ * Module:  library/bignum.c
+ * Caller:  library/dhm.c
+ *          library/ecp.c
+ *          library/ecdsa.c
+ *          library/rsa.c
+ *          library/rsa_internal.c
+ *          library/ssl_tls.c
+ *
+ * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support.
+ */
+#define MBEDTLS_BIGNUM_C
+
+/**
+ * \def MBEDTLS_BLOWFISH_C
+ *
+ * Enable the Blowfish block cipher.
+ *
+ * Module:  library/blowfish.c
+ */
+#define MBEDTLS_BLOWFISH_C
+
+/**
+ * \def MBEDTLS_CAMELLIA_C
+ *
+ * Enable the Camellia block cipher.
+ *
+ * Module:  library/camellia.c
+ * Caller:  library/ssl_tls.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_CAMELLIA_C
+
+/**
+ * \def MBEDTLS_CCM_C
+ *
+ * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher.
+ *
+ * Module:  library/ccm.c
+ *
+ * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C
+ *
+ * This module enables the AES-CCM ciphersuites, if other requisites are
+ * enabled as well.
+ */
+#define MBEDTLS_CCM_C
+
+/**
+ * \def MBEDTLS_CERTS_C
+ *
+ * Enable the test certificates.
+ *
+ * Module:  library/certs.c
+ * Caller:
+ *
+ * This module is used for testing (ssl_client/server).
+ */
+#define MBEDTLS_CERTS_C
+
+/**
+ * \def MBEDTLS_CIPHER_C
+ *
+ * Enable the generic cipher layer.
+ *
+ * Module:  library/cipher.c
+ * Caller:  library/ssl_tls.c
+ *
+ * Uncomment to enable generic cipher wrappers.
+ */
+#define MBEDTLS_CIPHER_C
+
+/**
+ * \def MBEDTLS_CMAC_C
+ *
+ * Enable the CMAC (Cipher-based Message Authentication Code) mode for block
+ * ciphers.
+ *
+ * Module:  library/cmac.c
+ *
+ * Requires: MBEDTLS_AES_C or MBEDTLS_DES_C
+ *
+ */
+//#define MBEDTLS_CMAC_C
+
+/**
+ * \def MBEDTLS_CTR_DRBG_C
+ *
+ * Enable the CTR_DRBG AES-256-based random generator.
+ *
+ * Module:  library/ctr_drbg.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_AES_C
+ *
+ * This module provides the CTR_DRBG AES-256 random number generator.
+ */
+#define MBEDTLS_CTR_DRBG_C
+
+/**
+ * \def MBEDTLS_DEBUG_C
+ *
+ * Enable the debug functions.
+ *
+ * Module:  library/debug.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *          library/ssl_tls.c
+ *
+ * This module provides debugging functions.
+ */
+#define MBEDTLS_DEBUG_C
+
+/**
+ * \def MBEDTLS_DES_C
+ *
+ * Enable the DES block cipher.
+ *
+ * Module:  library/des.c
+ * Caller:  library/pem.c
+ *          library/ssl_tls.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
+ *      MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
+ *
+ * PEM_PARSE uses DES/3DES for decrypting encrypted keys.
+ *
+ * \warning   DES is considered a weak cipher and its use constitutes a
+ *            security risk. We recommend considering stronger ciphers instead.
+ */
+#define MBEDTLS_DES_C
+
+/**
+ * \def MBEDTLS_DHM_C
+ *
+ * Enable the Diffie-Hellman-Merkle module.
+ *
+ * Module:  library/dhm.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * This module is used by the following key exchanges:
+ *      DHE-RSA, DHE-PSK
+ *
+ * \warning    Using DHE constitutes a security risk as it
+ *             is not possible to validate custom DH parameters.
+ *             If possible, it is recommended users should consider
+ *             preferring other methods of key exchange.
+ *             See dhm.h for more details.
+ *
+ */
+#define MBEDTLS_DHM_C
+
+/**
+ * \def MBEDTLS_ECDH_C
+ *
+ * Enable the elliptic curve Diffie-Hellman library.
+ *
+ * Module:  library/ecdh.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * This module is used by the following key exchanges:
+ *      ECDHE-ECDSA, ECDHE-RSA, DHE-PSK
+ *
+ * Requires: MBEDTLS_ECP_C
+ */
+#define MBEDTLS_ECDH_C
+
+/**
+ * \def MBEDTLS_ECDSA_C
+ *
+ * Enable the elliptic curve DSA library.
+ *
+ * Module:  library/ecdsa.c
+ * Caller:
+ *
+ * This module is used by the following key exchanges:
+ *      ECDHE-ECDSA
+ *
+ * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C
+ */
+#define MBEDTLS_ECDSA_C
+
+/**
+ * \def MBEDTLS_ECJPAKE_C
+ *
+ * Enable the elliptic curve J-PAKE library.
+ *
+ * \warning This is currently experimental. EC J-PAKE support is based on the
+ * Thread v1.0.0 specification; incompatible changes to the specification
+ * might still happen. For this reason, this is disabled by default.
+ *
+ * Module:  library/ecjpake.c
+ * Caller:
+ *
+ * This module is used by the following key exchanges:
+ *      ECJPAKE
+ *
+ * Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C
+ */
+//#define MBEDTLS_ECJPAKE_C
+
+/**
+ * \def MBEDTLS_ECP_C
+ *
+ * Enable the elliptic curve over GF(p) library.
+ *
+ * Module:  library/ecp.c
+ * Caller:  library/ecdh.c
+ *          library/ecdsa.c
+ *          library/ecjpake.c
+ *
+ * Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED
+ */
+#define MBEDTLS_ECP_C
+
+/**
+ * \def MBEDTLS_ENTROPY_C
+ *
+ * Enable the platform-specific entropy code.
+ *
+ * Module:  library/entropy.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C
+ *
+ * This module provides a generic entropy pool
+ */
+#define MBEDTLS_ENTROPY_C
+
+/**
+ * \def MBEDTLS_ERROR_C
+ *
+ * Enable error code to error string conversion.
+ *
+ * Module:  library/error.c
+ * Caller:
+ *
+ * This module enables mbedtls_strerror().
+ */
+#define MBEDTLS_ERROR_C
+
+/**
+ * \def MBEDTLS_GCM_C
+ *
+ * Enable the Galois/Counter Mode (GCM) for AES.
+ *
+ * Module:  library/gcm.c
+ *
+ * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C
+ *
+ * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other
+ * requisites are enabled as well.
+ */
+#define MBEDTLS_GCM_C
+
+/**
+ * \def MBEDTLS_HAVEGE_C
+ *
+ * Enable the HAVEGE random generator.
+ *
+ * Warning: the HAVEGE random generator is not suitable for virtualized
+ *          environments
+ *
+ * Warning: the HAVEGE random generator is dependent on timing and specific
+ *          processor traits. It is therefore not advised to use HAVEGE as
+ *          your applications primary random generator or primary entropy pool
+ *          input. As a secondary input to your entropy pool, it IS able add
+ *          the (limited) extra entropy it provides.
+ *
+ * Module:  library/havege.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_TIMING_C
+ *
+ * Uncomment to enable the HAVEGE random generator.
+ */
+//#define MBEDTLS_HAVEGE_C
+
+/**
+ * \def MBEDTLS_HMAC_DRBG_C
+ *
+ * Enable the HMAC_DRBG random generator.
+ *
+ * Module:  library/hmac_drbg.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_MD_C
+ *
+ * Uncomment to enable the HMAC_DRBG random number geerator.
+ */
+#define MBEDTLS_HMAC_DRBG_C
+
+/**
+ * \def MBEDTLS_MD_C
+ *
+ * Enable the generic message digest layer.
+ *
+ * Module:  library/md.c
+ * Caller:
+ *
+ * Uncomment to enable generic message digest wrappers.
+ */
+#define MBEDTLS_MD_C
+
+/**
+ * \def MBEDTLS_MD2_C
+ *
+ * Enable the MD2 hash algorithm.
+ *
+ * Module:  library/md2.c
+ * Caller:
+ *
+ * Uncomment to enable support for (rare) MD2-signed X.509 certs.
+ *
+ * \warning   MD2 is considered a weak message digest and its use constitutes a
+ *            security risk. If possible, we recommend avoiding dependencies on
+ *            it, and considering stronger message digests instead.
+ *
+ */
+//#define MBEDTLS_MD2_C
+
+/**
+ * \def MBEDTLS_MD4_C
+ *
+ * Enable the MD4 hash algorithm.
+ *
+ * Module:  library/md4.c
+ * Caller:
+ *
+ * Uncomment to enable support for (rare) MD4-signed X.509 certs.
+ *
+ * \warning   MD4 is considered a weak message digest and its use constitutes a
+ *            security risk. If possible, we recommend avoiding dependencies on
+ *            it, and considering stronger message digests instead.
+ *
+ */
+//#define MBEDTLS_MD4_C
+
+/**
+ * \def MBEDTLS_MD5_C
+ *
+ * Enable the MD5 hash algorithm.
+ *
+ * Module:  library/md5.c
+ * Caller:  library/md.c
+ *          library/pem.c
+ *          library/ssl_tls.c
+ *
+ * This module is required for SSL/TLS up to version 1.1, and for TLS 1.2
+ * depending on the handshake parameters. Further, it is used for checking
+ * MD5-signed certificates, and for PBKDF1 when decrypting PEM-encoded
+ * encrypted keys.
+ *
+ * \warning   MD5 is considered a weak message digest and its use constitutes a
+ *            security risk. If possible, we recommend avoiding dependencies on
+ *            it, and considering stronger message digests instead.
+ *
+ */
+#define MBEDTLS_MD5_C
+
+/**
+ * \def MBEDTLS_MEMORY_BUFFER_ALLOC_C
+ *
+ * Enable the buffer allocator implementation that makes use of a (stack)
+ * based buffer to 'allocate' dynamic memory. (replaces calloc() and free()
+ * calls)
+ *
+ * Module:  library/memory_buffer_alloc.c
+ *
+ * Requires: MBEDTLS_PLATFORM_C
+ *           MBEDTLS_PLATFORM_MEMORY (to use it within mbed TLS)
+ *
+ * Enable this module to enable the buffer memory allocator.
+ */
+//#define MBEDTLS_MEMORY_BUFFER_ALLOC_C
+
+/**
+ * \def MBEDTLS_NET_C
+ *
+ * Enable the TCP and UDP over IPv6/IPv4 networking routines.
+ *
+ * \note This module only works on POSIX/Unix (including Linux, BSD and OS X)
+ * and Windows. For other platforms, you'll want to disable it, and write your
+ * own networking callbacks to be passed to \c mbedtls_ssl_set_bio().
+ *
+ * \note See also our Knowledge Base article about porting to a new
+ * environment:
+ * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
+ *
+ * Module:  library/net_sockets.c
+ *
+ * This module provides networking routines.
+ */
+#define MBEDTLS_NET_C
+
+/**
+ * \def MBEDTLS_OID_C
+ *
+ * Enable the OID database.
+ *
+ * Module:  library/oid.c
+ * Caller:  library/asn1write.c
+ *          library/pkcs5.c
+ *          library/pkparse.c
+ *          library/pkwrite.c
+ *          library/rsa.c
+ *          library/x509.c
+ *          library/x509_create.c
+ *          library/x509_crl.c
+ *          library/x509_crt.c
+ *          library/x509_csr.c
+ *          library/x509write_crt.c
+ *          library/x509write_csr.c
+ *
+ * This modules translates between OIDs and internal values.
+ */
+#define MBEDTLS_OID_C
+
+/**
+ * \def MBEDTLS_PADLOCK_C
+ *
+ * Enable VIA Padlock support on x86.
+ *
+ * Module:  library/padlock.c
+ * Caller:  library/aes.c
+ *
+ * Requires: MBEDTLS_HAVE_ASM
+ *
+ * This modules adds support for the VIA PadLock on x86.
+ */
+#define MBEDTLS_PADLOCK_C
+
+/**
+ * \def MBEDTLS_PEM_PARSE_C
+ *
+ * Enable PEM decoding / parsing.
+ *
+ * Module:  library/pem.c
+ * Caller:  library/dhm.c
+ *          library/pkparse.c
+ *          library/x509_crl.c
+ *          library/x509_crt.c
+ *          library/x509_csr.c
+ *
+ * Requires: MBEDTLS_BASE64_C
+ *
+ * This modules adds support for decoding / parsing PEM files.
+ */
+#define MBEDTLS_PEM_PARSE_C
+
+/**
+ * \def MBEDTLS_PEM_WRITE_C
+ *
+ * Enable PEM encoding / writing.
+ *
+ * Module:  library/pem.c
+ * Caller:  library/pkwrite.c
+ *          library/x509write_crt.c
+ *          library/x509write_csr.c
+ *
+ * Requires: MBEDTLS_BASE64_C
+ *
+ * This modules adds support for encoding / writing PEM files.
+ */
+#define MBEDTLS_PEM_WRITE_C
+
+/**
+ * \def MBEDTLS_PK_C
+ *
+ * Enable the generic public (asymetric) key layer.
+ *
+ * Module:  library/pk.c
+ * Caller:  library/ssl_tls.c
+ *          library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C
+ *
+ * Uncomment to enable generic public key wrappers.
+ */
+#define MBEDTLS_PK_C
+
+/**
+ * \def MBEDTLS_PK_PARSE_C
+ *
+ * Enable the generic public (asymetric) key parser.
+ *
+ * Module:  library/pkparse.c
+ * Caller:  library/x509_crt.c
+ *          library/x509_csr.c
+ *
+ * Requires: MBEDTLS_PK_C
+ *
+ * Uncomment to enable generic public key parse functions.
+ */
+#define MBEDTLS_PK_PARSE_C
+
+/**
+ * \def MBEDTLS_PK_WRITE_C
+ *
+ * Enable the generic public (asymetric) key writer.
+ *
+ * Module:  library/pkwrite.c
+ * Caller:  library/x509write.c
+ *
+ * Requires: MBEDTLS_PK_C
+ *
+ * Uncomment to enable generic public key write functions.
+ */
+#define MBEDTLS_PK_WRITE_C
+
+/**
+ * \def MBEDTLS_PKCS5_C
+ *
+ * Enable PKCS#5 functions.
+ *
+ * Module:  library/pkcs5.c
+ *
+ * Requires: MBEDTLS_MD_C
+ *
+ * This module adds support for the PKCS#5 functions.
+ */
+#define MBEDTLS_PKCS5_C
+
+/**
+ * \def MBEDTLS_PKCS11_C
+ *
+ * Enable wrapper for PKCS#11 smartcard support.
+ *
+ * Module:  library/pkcs11.c
+ * Caller:  library/pk.c
+ *
+ * Requires: MBEDTLS_PK_C
+ *
+ * This module enables SSL/TLS PKCS #11 smartcard support.
+ * Requires the presence of the PKCS#11 helper library (libpkcs11-helper)
+ */
+//#define MBEDTLS_PKCS11_C
+
+/**
+ * \def MBEDTLS_PKCS12_C
+ *
+ * Enable PKCS#12 PBE functions.
+ * Adds algorithms for parsing PKCS#8 encrypted private keys
+ *
+ * Module:  library/pkcs12.c
+ * Caller:  library/pkparse.c
+ *
+ * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C
+ * Can use:  MBEDTLS_ARC4_C
+ *
+ * This module enables PKCS#12 functions.
+ */
+#define MBEDTLS_PKCS12_C
+
+/**
+ * \def MBEDTLS_PLATFORM_C
+ *
+ * Enable the platform abstraction layer that allows you to re-assign
+ * functions like calloc(), free(), snprintf(), printf(), fprintf(), exit().
+ *
+ * Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT
+ * or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned
+ * above to be specified at runtime or compile time respectively.
+ *
+ * \note This abstraction layer must be enabled on Windows (including MSYS2)
+ * as other module rely on it for a fixed snprintf implementation.
+ *
+ * Module:  library/platform.c
+ * Caller:  Most other .c files
+ *
+ * This module enables abstraction of common (libc) functions.
+ */
+#define MBEDTLS_PLATFORM_C
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_C
+ *
+ * Enable the Platform Security Architecture cryptography API.
+ *
+ * Module:  library/psa_crypto.c
+ *
+ * Requires: MBEDTLS_CTR_DRBG_C, MBEDTLS_ENTROPY_C
+ *
+ */
+#define MBEDTLS_PSA_CRYPTO_C
+
+/**
+ * \def MBEDTLS_RIPEMD160_C
+ *
+ * Enable the RIPEMD-160 hash algorithm.
+ *
+ * Module:  library/ripemd160.c
+ * Caller:  library/md.c
+ *
+ */
+#define MBEDTLS_RIPEMD160_C
+
+/**
+ * \def MBEDTLS_RSA_C
+ *
+ * Enable the RSA public-key cryptosystem.
+ *
+ * Module:  library/rsa.c
+ *          library/rsa_internal.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *          library/ssl_tls.c
+ *          library/x509.c
+ *
+ * This module is used by the following key exchanges:
+ *      RSA, DHE-RSA, ECDHE-RSA, RSA-PSK
+ *
+ * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C
+ */
+#define MBEDTLS_RSA_C
+
+/**
+ * \def MBEDTLS_SHA1_C
+ *
+ * Enable the SHA1 cryptographic hash algorithm.
+ *
+ * Module:  library/sha1.c
+ * Caller:  library/md.c
+ *          library/ssl_cli.c
+ *          library/ssl_srv.c
+ *          library/ssl_tls.c
+ *          library/x509write_crt.c
+ *
+ * This module is required for SSL/TLS up to version 1.1, for TLS 1.2
+ * depending on the handshake parameters, and for SHA1-signed certificates.
+ *
+ * \warning   SHA-1 is considered a weak message digest and its use constitutes
+ *            a security risk. If possible, we recommend avoiding dependencies
+ *            on it, and considering stronger message digests instead.
+ *
+ */
+#define MBEDTLS_SHA1_C
+
+/**
+ * \def MBEDTLS_SHA256_C
+ *
+ * Enable the SHA-224 and SHA-256 cryptographic hash algorithms.
+ *
+ * Module:  library/sha256.c
+ * Caller:  library/entropy.c
+ *          library/md.c
+ *          library/ssl_cli.c
+ *          library/ssl_srv.c
+ *          library/ssl_tls.c
+ *
+ * This module adds support for SHA-224 and SHA-256.
+ * This module is required for the SSL/TLS 1.2 PRF function.
+ */
+#define MBEDTLS_SHA256_C
+
+/**
+ * \def MBEDTLS_SHA512_C
+ *
+ * Enable the SHA-384 and SHA-512 cryptographic hash algorithms.
+ *
+ * Module:  library/sha512.c
+ * Caller:  library/entropy.c
+ *          library/md.c
+ *          library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * This module adds support for SHA-384 and SHA-512.
+ */
+#define MBEDTLS_SHA512_C
+
+/**
+ * \def MBEDTLS_SSL_CACHE_C
+ *
+ * Enable simple SSL cache implementation.
+ *
+ * Module:  library/ssl_cache.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SSL_CACHE_C
+ */
+#define MBEDTLS_SSL_CACHE_C
+
+/**
+ * \def MBEDTLS_SSL_COOKIE_C
+ *
+ * Enable basic implementation of DTLS cookies for hello verification.
+ *
+ * Module:  library/ssl_cookie.c
+ * Caller:
+ */
+#define MBEDTLS_SSL_COOKIE_C
+
+/**
+ * \def MBEDTLS_SSL_TICKET_C
+ *
+ * Enable an implementation of TLS server-side callbacks for session tickets.
+ *
+ * Module:  library/ssl_ticket.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_CIPHER_C
+ */
+#define MBEDTLS_SSL_TICKET_C
+
+/**
+ * \def MBEDTLS_SSL_CLI_C
+ *
+ * Enable the SSL/TLS client code.
+ *
+ * Module:  library/ssl_cli.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SSL_TLS_C
+ *
+ * This module is required for SSL/TLS client support.
+ */
+#define MBEDTLS_SSL_CLI_C
+
+/**
+ * \def MBEDTLS_SSL_SRV_C
+ *
+ * Enable the SSL/TLS server code.
+ *
+ * Module:  library/ssl_srv.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SSL_TLS_C
+ *
+ * This module is required for SSL/TLS server support.
+ */
+#define MBEDTLS_SSL_SRV_C
+
+/**
+ * \def MBEDTLS_SSL_TLS_C
+ *
+ * Enable the generic SSL/TLS code.
+ *
+ * Module:  library/ssl_tls.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C
+ *           and at least one of the MBEDTLS_SSL_PROTO_XXX defines
+ *
+ * This module is required for SSL/TLS.
+ */
+#define MBEDTLS_SSL_TLS_C
+
+/**
+ * \def MBEDTLS_THREADING_C
+ *
+ * Enable the threading abstraction layer.
+ * By default mbed TLS assumes it is used in a non-threaded environment or that
+ * contexts are not shared between threads. If you do intend to use contexts
+ * between threads, you will need to enable this layer to prevent race
+ * conditions. See also our Knowledge Base article about threading:
+ * https://tls.mbed.org/kb/development/thread-safety-and-multi-threading
+ *
+ * Module:  library/threading.c
+ *
+ * This allows different threading implementations (self-implemented or
+ * provided).
+ *
+ * You will have to enable either MBEDTLS_THREADING_ALT or
+ * MBEDTLS_THREADING_PTHREAD.
+ *
+ * Enable this layer to allow use of mutexes within mbed TLS
+ */
+//#define MBEDTLS_THREADING_C
+
+/**
+ * \def MBEDTLS_TIMING_C
+ *
+ * Enable the semi-portable timing interface.
+ *
+ * \note The provided implementation only works on POSIX/Unix (including Linux,
+ * BSD and OS X) and Windows. On other platforms, you can either disable that
+ * module and provide your own implementations of the callbacks needed by
+ * \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide
+ * your own implementation of the whole module by setting
+ * \c MBEDTLS_TIMING_ALT in the current file.
+ *
+ * \note See also our Knowledge Base article about porting to a new
+ * environment:
+ * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
+ *
+ * Module:  library/timing.c
+ * Caller:  library/havege.c
+ *
+ * This module is used by the HAVEGE random number generator.
+ */
+#define MBEDTLS_TIMING_C
+
+/**
+ * \def MBEDTLS_VERSION_C
+ *
+ * Enable run-time version information.
+ *
+ * Module:  library/version.c
+ *
+ * This module provides run-time version information.
+ */
+#define MBEDTLS_VERSION_C
+
+/**
+ * \def MBEDTLS_X509_USE_C
+ *
+ * Enable X.509 core for using certificates.
+ *
+ * Module:  library/x509.c
+ * Caller:  library/x509_crl.c
+ *          library/x509_crt.c
+ *          library/x509_csr.c
+ *
+ * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C,
+ *           MBEDTLS_PK_PARSE_C
+ *
+ * This module is required for the X.509 parsing modules.
+ */
+#define MBEDTLS_X509_USE_C
+
+/**
+ * \def MBEDTLS_X509_CRT_PARSE_C
+ *
+ * Enable X.509 certificate parsing.
+ *
+ * Module:  library/x509_crt.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *          library/ssl_tls.c
+ *
+ * Requires: MBEDTLS_X509_USE_C
+ *
+ * This module is required for X.509 certificate parsing.
+ */
+#define MBEDTLS_X509_CRT_PARSE_C
+
+/**
+ * \def MBEDTLS_X509_CRL_PARSE_C
+ *
+ * Enable X.509 CRL parsing.
+ *
+ * Module:  library/x509_crl.c
+ * Caller:  library/x509_crt.c
+ *
+ * Requires: MBEDTLS_X509_USE_C
+ *
+ * This module is required for X.509 CRL parsing.
+ */
+#define MBEDTLS_X509_CRL_PARSE_C
+
+/**
+ * \def MBEDTLS_X509_CSR_PARSE_C
+ *
+ * Enable X.509 Certificate Signing Request (CSR) parsing.
+ *
+ * Module:  library/x509_csr.c
+ * Caller:  library/x509_crt_write.c
+ *
+ * Requires: MBEDTLS_X509_USE_C
+ *
+ * This module is used for reading X.509 certificate request.
+ */
+#define MBEDTLS_X509_CSR_PARSE_C
+
+/**
+ * \def MBEDTLS_X509_CREATE_C
+ *
+ * Enable X.509 core for creating certificates.
+ *
+ * Module:  library/x509_create.c
+ *
+ * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C
+ *
+ * This module is the basis for creating X.509 certificates and CSRs.
+ */
+#define MBEDTLS_X509_CREATE_C
+
+/**
+ * \def MBEDTLS_X509_CRT_WRITE_C
+ *
+ * Enable creating X.509 certificates.
+ *
+ * Module:  library/x509_crt_write.c
+ *
+ * Requires: MBEDTLS_X509_CREATE_C
+ *
+ * This module is required for X.509 certificate creation.
+ */
+#define MBEDTLS_X509_CRT_WRITE_C
+
+/**
+ * \def MBEDTLS_X509_CSR_WRITE_C
+ *
+ * Enable creating X.509 Certificate Signing Requests (CSR).
+ *
+ * Module:  library/x509_csr_write.c
+ *
+ * Requires: MBEDTLS_X509_CREATE_C
+ *
+ * This module is required for X.509 certificate request writing.
+ */
+#define MBEDTLS_X509_CSR_WRITE_C
+
+/**
+ * \def MBEDTLS_XTEA_C
+ *
+ * Enable the XTEA block cipher.
+ *
+ * Module:  library/xtea.c
+ * Caller:
+ */
+#define MBEDTLS_XTEA_C
+
+/* \} name SECTION: mbed TLS modules */
+
+/**
+ * \name SECTION: Module configuration options
+ *
+ * This section allows for the setting of module specific sizes and
+ * configuration options. The default values are already present in the
+ * relevant header files and should suffice for the regular use cases.
+ *
+ * Our advice is to enable options and change their values here
+ * only if you have a good reason and know the consequences.
+ *
+ * Please check the respective header file for documentation on these
+ * parameters (to prevent duplicate documentation).
+ * \{
+ */
+
+/* MPI / BIGNUM options */
+//#define MBEDTLS_MPI_WINDOW_SIZE            6 /**< Maximum windows size used. */
+//#define MBEDTLS_MPI_MAX_SIZE            1024 /**< Maximum number of bytes for usable MPIs. */
+
+/* CTR_DRBG options */
+//#define MBEDTLS_CTR_DRBG_ENTROPY_LEN               48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
+//#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL        10000 /**< Interval before reseed is performed by default */
+//#define MBEDTLS_CTR_DRBG_MAX_INPUT                256 /**< Maximum number of additional input bytes */
+//#define MBEDTLS_CTR_DRBG_MAX_REQUEST             1024 /**< Maximum number of requested bytes per call */
+//#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT           384 /**< Maximum size of (re)seed buffer */
+
+/* HMAC_DRBG options */
+//#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL   10000 /**< Interval before reseed is performed by default */
+//#define MBEDTLS_HMAC_DRBG_MAX_INPUT           256 /**< Maximum number of additional input bytes */
+//#define MBEDTLS_HMAC_DRBG_MAX_REQUEST        1024 /**< Maximum number of requested bytes per call */
+//#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT      384 /**< Maximum size of (re)seed buffer */
+
+/* ECP options */
+//#define MBEDTLS_ECP_MAX_BITS             521 /**< Maximum bit size of groups */
+//#define MBEDTLS_ECP_WINDOW_SIZE            6 /**< Maximum window size used */
+//#define MBEDTLS_ECP_FIXED_POINT_OPTIM      1 /**< Enable fixed-point speed-up */
+
+/* Entropy options */
+//#define MBEDTLS_ENTROPY_MAX_SOURCES                20 /**< Maximum number of sources supported */
+//#define MBEDTLS_ENTROPY_MAX_GATHER                128 /**< Maximum amount requested from entropy sources */
+//#define MBEDTLS_ENTROPY_MIN_HARDWARE               32 /**< Default minimum number of bytes required for the hardware entropy source mbedtls_hardware_poll() before entropy is released */
+
+/* Memory buffer allocator options */
+//#define MBEDTLS_MEMORY_ALIGN_MULTIPLE      4 /**< Align on multiples of this value */
+
+/* Platform options */
+//#define MBEDTLS_PLATFORM_STD_MEM_HDR   <stdlib.h> /**< Header to include if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */
+//#define MBEDTLS_PLATFORM_STD_CALLOC        calloc /**< Default allocator to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_FREE            free /**< Default free to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_EXIT            exit /**< Default exit to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_TIME            time /**< Default time to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
+//#define MBEDTLS_PLATFORM_STD_FPRINTF      fprintf /**< Default fprintf to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_PRINTF        printf /**< Default printf to use, can be undefined */
+/* Note: your snprintf must correclty zero-terminate the buffer! */
+//#define MBEDTLS_PLATFORM_STD_SNPRINTF    snprintf /**< Default snprintf to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS       0 /**< Default exit value to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE       1 /**< Default exit value to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_NV_SEED_READ   mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_NV_SEED_WRITE  mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_NV_SEED_FILE  "seedfile" /**< Seed file to read/write with default implementation */
+
+/* To Use Function Macros MBEDTLS_PLATFORM_C must be enabled */
+/* MBEDTLS_PLATFORM_XXX_MACRO and MBEDTLS_PLATFORM_XXX_ALT cannot both be defined */
+//#define MBEDTLS_PLATFORM_CALLOC_MACRO        calloc /**< Default allocator macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_FREE_MACRO            free /**< Default free macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_EXIT_MACRO            exit /**< Default exit macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_TIME_MACRO            time /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
+//#define MBEDTLS_PLATFORM_TIME_TYPE_MACRO       time_t /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
+//#define MBEDTLS_PLATFORM_FPRINTF_MACRO      fprintf /**< Default fprintf macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_PRINTF_MACRO        printf /**< Default printf macro to use, can be undefined */
+/* Note: your snprintf must correclty zero-terminate the buffer! */
+//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO    snprintf /**< Default snprintf macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO   mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
+//#define MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO  mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
+
+/* SSL Cache options */
+//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT       86400 /**< 1 day  */
+//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES      50 /**< Maximum entries in cache */
+
+/* SSL options */
+//#define MBEDTLS_SSL_MAX_CONTENT_LEN             16384 /**< Maxium fragment length in bytes, determines the size of each of the two internal I/O buffers */
+//#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME     86400 /**< Lifetime of session tickets (if enabled) */
+//#define MBEDTLS_PSK_MAX_LEN               32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */
+//#define MBEDTLS_SSL_COOKIE_TIMEOUT        60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */
+
+/**
+ * Complete list of ciphersuites to use, in order of preference.
+ *
+ * \warning No dependency checking is done on that field! This option can only
+ * be used to restrict the set of available ciphersuites. It is your
+ * responsibility to make sure the needed modules are active.
+ *
+ * Use this to save a few hundred bytes of ROM (default ordering of all
+ * available ciphersuites) and a few to a few hundred bytes of RAM.
+ *
+ * The value below is only an example, not the default.
+ */
+//#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+
+/* X509 options */
+//#define MBEDTLS_X509_MAX_INTERMEDIATE_CA   8   /**< Maximum number of intermediate CAs in a verification chain. */
+//#define MBEDTLS_X509_MAX_FILE_PATH_LEN     512 /**< Maximum length of a path/filename string in bytes including the null terminator character ('\0'). */
+
+/**
+ * Allow SHA-1 in the default TLS configuration for certificate signing.
+ * Without this build-time option, SHA-1 support must be activated explicitly
+ * through mbedtls_ssl_conf_cert_profile. Turning on this option is not
+ * recommended because of it is possible to generate SHA-1 collisions, however
+ * this may be safe for legacy infrastructure where additional controls apply.
+ *
+ * \warning   SHA-1 is considered a weak message digest and its use constitutes
+ *            a security risk. If possible, we recommend avoiding dependencies
+ *            on it, and considering stronger message digests instead.
+ *
+ */
+// #define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES
+
+/**
+ * Allow SHA-1 in the default TLS configuration for TLS 1.2 handshake
+ * signature and ciphersuite selection. Without this build-time option, SHA-1
+ * support must be activated explicitly through mbedtls_ssl_conf_sig_hashes.
+ * The use of SHA-1 in TLS <= 1.1 and in HMAC-SHA-1 is always allowed by
+ * default. At the time of writing, there is no practical attack on the use
+ * of SHA-1 in handshake signatures, hence this option is turned on by default
+ * to preserve compatibility with existing peers, but the general
+ * warning applies nonetheless:
+ *
+ * \warning   SHA-1 is considered a weak message digest and its use constitutes
+ *            a security risk. If possible, we recommend avoiding dependencies
+ *            on it, and considering stronger message digests instead.
+ *
+ */
+#define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE
+
+/**
+ * Uncomment the macro to let mbed TLS use your alternate implementation of
+ * mbedtls_platform_zeroize(). This replaces the default implementation in
+ * platform_util.c.
+ *
+ * mbedtls_platform_zeroize() is a widely used function across the library to
+ * zero a block of memory. The implementation is expected to be secure in the
+ * sense that it has been written to prevent the compiler from removing calls
+ * to mbedtls_platform_zeroize() as part of redundant code elimination
+ * optimizations. However, it is difficult to guarantee that calls to
+ * mbedtls_platform_zeroize() will not be optimized by the compiler as older
+ * versions of the C language standards do not provide a secure implementation
+ * of memset(). Therefore, MBEDTLS_PLATFORM_ZEROIZE_ALT enables users to
+ * configure their own implementation of mbedtls_platform_zeroize(), for
+ * example by using directives specific to their compiler, features from newer
+ * C standards (e.g using memset_s() in C11) or calling a secure memset() from
+ * their system (e.g explicit_bzero() in BSD).
+ */
+//#define MBEDTLS_PLATFORM_ZEROIZE_ALT
+
+/* \} name SECTION: Customisation configuration options */
+
+/* Target and application specific configurations */
+//#define YOTTA_CFG_MBEDTLS_TARGET_CONFIG_FILE "mbedtls/target_config.h"
+
+#if defined(TARGET_LIKE_MBED) && defined(YOTTA_CFG_MBEDTLS_TARGET_CONFIG_FILE)
+#include YOTTA_CFG_MBEDTLS_TARGET_CONFIG_FILE
+#endif
+
+/*
+ * Allow user to override any previous default.
+ *
+ * Use two macro names for that, as:
+ * - with yotta the prefix YOTTA_CFG_ is forced
+ * - without yotta is looks weird to have a YOTTA prefix.
+ */
+#if defined(YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE)
+#include YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE
+#elif defined(MBEDTLS_USER_CONFIG_FILE)
+#include MBEDTLS_USER_CONFIG_FILE
+#endif
+
+#include "check_config.h"
+
+#endif /* MBEDTLS_CONFIG_H */
diff --git a/include/mbedtls/config.h b/include/mbedtls/config.h
index dc112a9..9f063be 100644
--- a/include/mbedtls/config.h
+++ b/include/mbedtls/config.h
@@ -1,11 +1,9 @@
 /**
- * \file config.h
+ * \file config-psa-crypto.h
  *
- * \brief Configuration options (set of defines)
+ * \brief Configuration with all cryptography features and no X.509 or TLS.
  *
- *  This set of compile-time options may be used to enable
- *  or disable features selectively, and reduce the global
- *  memory footprint.
+ * This configuration is intended to prototype the PSA reference implementation.
  */
 /*
  *  Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
@@ -120,33 +118,6 @@
 //#define MBEDTLS_HAVE_SSE2
 
 /**
- * \def MBEDTLS_HAVE_TIME
- *
- * System has time.h and time().
- * The time does not need to be correct, only time differences are used,
- * by contrast with MBEDTLS_HAVE_TIME_DATE
- *
- * Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT,
- * MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and
- * MBEDTLS_PLATFORM_STD_TIME.
- *
- * Comment if your system does not support time functions
- */
-#define MBEDTLS_HAVE_TIME
-
-/**
- * \def MBEDTLS_HAVE_TIME_DATE
- *
- * System has time.h and time(), gmtime() and the clock is correct.
- * The time needs to be correct (not necesarily very accurate, but at least
- * the date should be correct). This is used to verify the validity period of
- * X.509 certificates.
- *
- * Comment if your system does not have a correct clock.
- */
-#define MBEDTLS_HAVE_TIME_DATE
-
-/**
  * \def MBEDTLS_PLATFORM_MEMORY
  *
  * Enable the memory allocation layer.
@@ -258,19 +229,6 @@
  */
 
 /**
- * \def MBEDTLS_TIMING_ALT
- *
- * Uncomment to provide your own alternate implementation for mbedtls_timing_hardclock(),
- * mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay()
- *
- * Only works if you have MBEDTLS_TIMING_C enabled.
- *
- * You will need to provide a header "timing_alt.h" and an implementation at
- * compile time.
- */
-//#define MBEDTLS_TIMING_ALT
-
-/**
  * \def MBEDTLS_AES_ALT
  *
  * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your
@@ -605,37 +563,6 @@
 #define MBEDTLS_CIPHER_PADDING_ZEROS
 
 /**
- * \def MBEDTLS_ENABLE_WEAK_CIPHERSUITES
- *
- * Enable weak ciphersuites in SSL / TLS.
- * Warning: Only do so when you know what you are doing. This allows for
- * channels with virtually no security at all!
- *
- * This enables the following ciphersuites:
- *      MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA
- *      MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA
- *
- * Uncomment this macro to enable weak ciphersuites
- *
- * \warning   DES is considered a weak cipher and its use constitutes a
- *            security risk. We recommend considering stronger ciphers instead.
- */
-//#define MBEDTLS_ENABLE_WEAK_CIPHERSUITES
-
-/**
- * \def MBEDTLS_REMOVE_ARC4_CIPHERSUITES
- *
- * Remove RC4 ciphersuites by default in SSL / TLS.
- * This flag removes the ciphersuites based on RC4 from the default list as
- * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible to
- * enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including them
- * explicitly.
- *
- * Uncomment this macro to remove RC4 ciphersuites by default.
- */
-#define MBEDTLS_REMOVE_ARC4_CIPHERSUITES
-
-/**
  * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED
  *
  * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve
@@ -683,281 +610,6 @@
 #define MBEDTLS_ECDSA_DETERMINISTIC
 
 /**
- * \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
- *
- * Enable the PSK based ciphersuite modes in SSL / TLS.
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
- *      MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
- *      MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
- *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
- *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
- *      MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
- *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
- *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
- *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
- *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_PSK_WITH_RC4_128_SHA
- */
-#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
-
-/**
- * \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
- *
- * Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
- *
- * Requires: MBEDTLS_DHM_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
- *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
- *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
- *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
- *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
- *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
- *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
- *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
- *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
- *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA
- *
- * \warning    Using DHE constitutes a security risk as it
- *             is not possible to validate custom DH parameters.
- *             If possible, it is recommended users should consider
- *             preferring other methods of key exchange.
- *             See dhm.h for more details.
- *
- */
-#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
-
-/**
- * \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
- *
- * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
- *
- * Requires: MBEDTLS_ECDH_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
- *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
- *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA
- */
-#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
-
-/**
- * \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
- *
- * Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
- *
- * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
- *           MBEDTLS_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
- *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
- *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
- *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
- *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
- *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
- *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
- *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
- *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
- *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA
- */
-#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
-
-/**
- * \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
- *
- * Enable the RSA-only based ciphersuite modes in SSL / TLS.
- *
- * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
- *           MBEDTLS_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
- *      MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
- *      MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
- *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
- *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
- *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
- *      MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
- *      MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
- *      MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
- *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
- *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
- *      MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_RSA_WITH_RC4_128_SHA
- *      MBEDTLS_TLS_RSA_WITH_RC4_128_MD5
- */
-#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
-
-/**
- * \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
- *
- * Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
- *
- * Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
- *           MBEDTLS_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
- *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
- *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
- *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
- *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
- *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
- *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
- *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
- *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
- *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
- *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
- *      MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
- *
- * \warning    Using DHE constitutes a security risk as it
- *             is not possible to validate custom DH parameters.
- *             If possible, it is recommended users should consider
- *             preferring other methods of key exchange.
- *             See dhm.h for more details.
- *
- */
-#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-
-/**
- * \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
- *
- * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
- *
- * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
- *           MBEDTLS_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA
- */
-#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-
-/**
- * \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
- *
- * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
- *
- * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C,
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
- */
-#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
-
-/**
- * \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
- *
- * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
- *
- * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
- */
-#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
-
-/**
- * \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
- *
- * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
- *
- * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA
- *      MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
- *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
- *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
- *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
- *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
- *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
- *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
- *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
- */
-#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
-
-/**
- * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
- *
- * Enable the ECJPAKE based ciphersuite modes in SSL / TLS.
- *
- * \warning This is currently experimental. EC J-PAKE support is based on the
- * Thread v1.0.0 specification; incompatible changes to the specification
- * might still happen. For this reason, this is disabled by default.
- *
- * Requires: MBEDTLS_ECJPAKE_C
- *           MBEDTLS_SHA256_C
- *           MBEDTLS_ECP_DP_SECP256R1_ENABLED
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8
- */
-//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
-
-/**
  * \def MBEDTLS_PK_PARSE_EC_EXTENDED
  *
  * Enhance support for reading EC keys using variants of SEC1 not allowed by
@@ -1129,8 +781,7 @@
 /**
  * \def MBEDTLS_RSA_NO_CRT
  *
- * Do not use the Chinese Remainder Theorem
- * for the RSA private operation.
+ * Do not use the Chinese Remainder Theorem for the RSA private operation.
  *
  * Uncomment this macro to disable the use of CRT in RSA.
  *
@@ -1161,20 +812,6 @@
 //#define MBEDTLS_SHA256_SMALLER
 
 /**
- * \def MBEDTLS_SSL_ALL_ALERT_MESSAGES
- *
- * Enable sending of alert messages in case of encountered errors as per RFC.
- * If you choose not to send the alert messages, mbed TLS can still communicate
- * with other servers, only debugging of failures is harder.
- *
- * The advantage of not sending alert messages, is that no information is given
- * about reasons for failures thus preventing adversaries of gaining intel.
- *
- * Enable sending of all alert messages
- */
-#define MBEDTLS_SSL_ALL_ALERT_MESSAGES
-
-/**
  * \def MBEDTLS_SSL_ASYNC_PRIVATE
  *
  * Enable asynchronous external private key operations in SSL. This allows
@@ -1186,348 +823,6 @@
 //#define MBEDTLS_SSL_ASYNC_PRIVATE
 
 /**
- * \def MBEDTLS_SSL_DEBUG_ALL
- *
- * Enable the debug messages in SSL module for all issues.
- * Debug messages have been disabled in some places to prevent timing
- * attacks due to (unbalanced) debugging function calls.
- *
- * If you need all error reporting you should enable this during debugging,
- * but remove this for production servers that should log as well.
- *
- * Uncomment this macro to report all debug messages on errors introducing
- * a timing side-channel.
- *
- */
-//#define MBEDTLS_SSL_DEBUG_ALL
-
-/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC
- *
- * Enable support for Encrypt-then-MAC, RFC 7366.
- *
- * This allows peers that both support it to use a more robust protection for
- * ciphersuites using CBC, providing deep resistance against timing attacks
- * on the padding or underlying cipher.
- *
- * This only affects CBC ciphersuites, and is useless if none is defined.
- *
- * Requires: MBEDTLS_SSL_PROTO_TLS1    or
- *           MBEDTLS_SSL_PROTO_TLS1_1  or
- *           MBEDTLS_SSL_PROTO_TLS1_2
- *
- * Comment this macro to disable support for Encrypt-then-MAC
- */
-#define MBEDTLS_SSL_ENCRYPT_THEN_MAC
-
-/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET
- *
- * Enable support for Extended Master Secret, aka Session Hash
- * (draft-ietf-tls-session-hash-02).
- *
- * This was introduced as "the proper fix" to the Triple Handshake familiy of
- * attacks, but it is recommended to always use it (even if you disable
- * renegotiation), since it actually fixes a more fundamental issue in the
- * original SSL/TLS design, and has implications beyond Triple Handshake.
- *
- * Requires: MBEDTLS_SSL_PROTO_TLS1    or
- *           MBEDTLS_SSL_PROTO_TLS1_1  or
- *           MBEDTLS_SSL_PROTO_TLS1_2
- *
- * Comment this macro to disable support for Extended Master Secret.
- */
-#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET
-
-/**
- * \def MBEDTLS_SSL_FALLBACK_SCSV
- *
- * Enable support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv-00).
- *
- * For servers, it is recommended to always enable this, unless you support
- * only one version of TLS, or know for sure that none of your clients
- * implements a fallback strategy.
- *
- * For clients, you only need this if you're using a fallback strategy, which
- * is not recommended in the first place, unless you absolutely need it to
- * interoperate with buggy (version-intolerant) servers.
- *
- * Comment this macro to disable support for FALLBACK_SCSV
- */
-#define MBEDTLS_SSL_FALLBACK_SCSV
-
-/**
- * \def MBEDTLS_SSL_HW_RECORD_ACCEL
- *
- * Enable hooking functions in SSL module for hardware acceleration of
- * individual records.
- *
- * Uncomment this macro to enable hooking functions.
- */
-//#define MBEDTLS_SSL_HW_RECORD_ACCEL
-
-/**
- * \def MBEDTLS_SSL_CBC_RECORD_SPLITTING
- *
- * Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0.
- *
- * This is a countermeasure to the BEAST attack, which also minimizes the risk
- * of interoperability issues compared to sending 0-length records.
- *
- * Comment this macro to disable 1/n-1 record splitting.
- */
-#define MBEDTLS_SSL_CBC_RECORD_SPLITTING
-
-/**
- * \def MBEDTLS_SSL_RENEGOTIATION
- *
- * Disable support for TLS renegotiation.
- *
- * The two main uses of renegotiation are (1) refresh keys on long-lived
- * connections and (2) client authentication after the initial handshake.
- * If you don't need renegotiation, it's probably better to disable it, since
- * it has been associated with security issues in the past and is easy to
- * misuse/misunderstand.
- *
- * Comment this to disable support for renegotiation.
- *
- * \note   Even if this option is disabled, both client and server are aware
- *         of the Renegotiation Indication Extension (RFC 5746) used to
- *         prevent the SSL renegotiation attack (see RFC 5746 Sect. 1).
- *         (See \c mbedtls_ssl_conf_legacy_renegotiation for the
- *          configuration of this extension).
- *
- */
-#define MBEDTLS_SSL_RENEGOTIATION
-
-/**
- * \def MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
- *
- * Enable support for receiving and parsing SSLv2 Client Hello messages for the
- * SSL Server module (MBEDTLS_SSL_SRV_C).
- *
- * Uncomment this macro to enable support for SSLv2 Client Hello messages.
- */
-//#define MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
-
-/**
- * \def MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE
- *
- * Pick the ciphersuite according to the client's preferences rather than ours
- * in the SSL Server module (MBEDTLS_SSL_SRV_C).
- *
- * Uncomment this macro to respect client's ciphersuite order
- */
-//#define MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE
-
-/**
- * \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
- *
- * Enable support for RFC 6066 max_fragment_length extension in SSL.
- *
- * Comment this macro to disable support for the max_fragment_length extension
- */
-#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
-
-/**
- * \def MBEDTLS_SSL_PROTO_SSL3
- *
- * Enable support for SSL 3.0.
- *
- * Requires: MBEDTLS_MD5_C
- *           MBEDTLS_SHA1_C
- *
- * Comment this macro to disable support for SSL 3.0
- */
-//#define MBEDTLS_SSL_PROTO_SSL3
-
-/**
- * \def MBEDTLS_SSL_PROTO_TLS1
- *
- * Enable support for TLS 1.0.
- *
- * Requires: MBEDTLS_MD5_C
- *           MBEDTLS_SHA1_C
- *
- * Comment this macro to disable support for TLS 1.0
- */
-#define MBEDTLS_SSL_PROTO_TLS1
-
-/**
- * \def MBEDTLS_SSL_PROTO_TLS1_1
- *
- * Enable support for TLS 1.1 (and DTLS 1.0 if DTLS is enabled).
- *
- * Requires: MBEDTLS_MD5_C
- *           MBEDTLS_SHA1_C
- *
- * Comment this macro to disable support for TLS 1.1 / DTLS 1.0
- */
-#define MBEDTLS_SSL_PROTO_TLS1_1
-
-/**
- * \def MBEDTLS_SSL_PROTO_TLS1_2
- *
- * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled).
- *
- * Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C
- *           (Depends on ciphersuites)
- *
- * Comment this macro to disable support for TLS 1.2 / DTLS 1.2
- */
-#define MBEDTLS_SSL_PROTO_TLS1_2
-
-/**
- * \def MBEDTLS_SSL_PROTO_DTLS
- *
- * Enable support for DTLS (all available versions).
- *
- * Enable this and MBEDTLS_SSL_PROTO_TLS1_1 to enable DTLS 1.0,
- * and/or this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2.
- *
- * Requires: MBEDTLS_SSL_PROTO_TLS1_1
- *        or MBEDTLS_SSL_PROTO_TLS1_2
- *
- * Comment this macro to disable support for DTLS
- */
-#define MBEDTLS_SSL_PROTO_DTLS
-
-/**
- * \def MBEDTLS_SSL_ALPN
- *
- * Enable support for RFC 7301 Application Layer Protocol Negotiation.
- *
- * Comment this macro to disable support for ALPN.
- */
-#define MBEDTLS_SSL_ALPN
-
-/**
- * \def MBEDTLS_SSL_DTLS_ANTI_REPLAY
- *
- * Enable support for the anti-replay mechanism in DTLS.
- *
- * Requires: MBEDTLS_SSL_TLS_C
- *           MBEDTLS_SSL_PROTO_DTLS
- *
- * \warning Disabling this is often a security risk!
- * See mbedtls_ssl_conf_dtls_anti_replay() for details.
- *
- * Comment this to disable anti-replay in DTLS.
- */
-#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
-
-/**
- * \def MBEDTLS_SSL_DTLS_HELLO_VERIFY
- *
- * Enable support for HelloVerifyRequest on DTLS servers.
- *
- * This feature is highly recommended to prevent DTLS servers being used as
- * amplifiers in DoS attacks against other hosts. It should always be enabled
- * unless you know for sure amplification cannot be a problem in the
- * environment in which your server operates.
- *
- * \warning Disabling this can ba a security risk! (see above)
- *
- * Requires: MBEDTLS_SSL_PROTO_DTLS
- *
- * Comment this to disable support for HelloVerifyRequest.
- */
-#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
-
-/**
- * \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
- *
- * Enable server-side support for clients that reconnect from the same port.
- *
- * Some clients unexpectedly close the connection and try to reconnect using the
- * same source port. This needs special support from the server to handle the
- * new connection securely, as described in section 4.2.8 of RFC 6347. This
- * flag enables that support.
- *
- * Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY
- *
- * Comment this to disable support for clients reusing the source port.
- */
-#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
-
-/**
- * \def MBEDTLS_SSL_DTLS_BADMAC_LIMIT
- *
- * Enable support for a limit of records with bad MAC.
- *
- * See mbedtls_ssl_conf_dtls_badmac_limit().
- *
- * Requires: MBEDTLS_SSL_PROTO_DTLS
- */
-#define MBEDTLS_SSL_DTLS_BADMAC_LIMIT
-
-/**
- * \def MBEDTLS_SSL_SESSION_TICKETS
- *
- * Enable support for RFC 5077 session tickets in SSL.
- * Client-side, provides full support for session tickets (maintainance of a
- * session store remains the responsibility of the application, though).
- * Server-side, you also need to provide callbacks for writing and parsing
- * tickets, including authenticated encryption and key management. Example
- * callbacks are provided by MBEDTLS_SSL_TICKET_C.
- *
- * Comment this macro to disable support for SSL session tickets
- */
-#define MBEDTLS_SSL_SESSION_TICKETS
-
-/**
- * \def MBEDTLS_SSL_EXPORT_KEYS
- *
- * Enable support for exporting key block and master secret.
- * This is required for certain users of TLS, e.g. EAP-TLS.
- *
- * Comment this macro to disable support for key export
- */
-#define MBEDTLS_SSL_EXPORT_KEYS
-
-/**
- * \def MBEDTLS_SSL_SERVER_NAME_INDICATION
- *
- * Enable support for RFC 6066 server name indication (SNI) in SSL.
- *
- * Requires: MBEDTLS_X509_CRT_PARSE_C
- *
- * Comment this macro to disable support for server name indication in SSL
- */
-#define MBEDTLS_SSL_SERVER_NAME_INDICATION
-
-/**
- * \def MBEDTLS_SSL_TRUNCATED_HMAC
- *
- * Enable support for RFC 6066 truncated HMAC in SSL.
- *
- * Comment this macro to disable support for truncated HMAC in SSL
- */
-#define MBEDTLS_SSL_TRUNCATED_HMAC
-
-/**
- * \def MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT
- *
- * Fallback to old (pre-2.7), non-conforming implementation of the truncated
- * HMAC extension which also truncates the HMAC key. Note that this option is
- * only meant for a transitory upgrade period and is likely to be removed in
- * a future version of the library.
- *
- * \warning The old implementation is non-compliant and has a security weakness
- *          (2^80 brute force attack on the HMAC key used for a single,
- *          uninterrupted connection). This should only be enabled temporarily
- *          when (1) the use of truncated HMAC is essential in order to save
- *          bandwidth, and (2) the peer is an Mbed TLS stack that doesn't use
- *          the fixed implementation yet (pre-2.7).
- *
- * \deprecated This option is deprecated and will likely be removed in a
- *             future version of Mbed TLS.
- *
- * Uncomment to fallback to old, non-compliant truncated HMAC implementation.
- *
- * Requires: MBEDTLS_SSL_TRUNCATED_HMAC
- */
-//#define MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT
-
-/**
  * \def MBEDTLS_THREADING_ALT
  *
  * Provide your own alternate threading implementation.
@@ -1562,89 +857,6 @@
  */
 #define MBEDTLS_VERSION_FEATURES
 
-/**
- * \def MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3
- *
- * If set, the X509 parser will not break-off when parsing an X509 certificate
- * and encountering an extension in a v1 or v2 certificate.
- *
- * Uncomment to prevent an error.
- */
-//#define MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3
-
-/**
- * \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
- *
- * If set, the X509 parser will not break-off when parsing an X509 certificate
- * and encountering an unknown critical extension.
- *
- * \warning Depending on your PKI use, enabling this can be a security risk!
- *
- * Uncomment to prevent an error.
- */
-//#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
-
-/**
- * \def MBEDTLS_X509_CHECK_KEY_USAGE
- *
- * Enable verification of the keyUsage extension (CA and leaf certificates).
- *
- * Disabling this avoids problems with mis-issued and/or misused
- * (intermediate) CA and leaf certificates.
- *
- * \warning Depending on your PKI use, disabling this can be a security risk!
- *
- * Comment to skip keyUsage checking for both CA and leaf certificates.
- */
-#define MBEDTLS_X509_CHECK_KEY_USAGE
-
-/**
- * \def MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE
- *
- * Enable verification of the extendedKeyUsage extension (leaf certificates).
- *
- * Disabling this avoids problems with mis-issued and/or misused certificates.
- *
- * \warning Depending on your PKI use, disabling this can be a security risk!
- *
- * Comment to skip extendedKeyUsage checking for certificates.
- */
-#define MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE
-
-/**
- * \def MBEDTLS_X509_RSASSA_PSS_SUPPORT
- *
- * Enable parsing and verification of X.509 certificates, CRLs and CSRS
- * signed with RSASSA-PSS (aka PKCS#1 v2.1).
- *
- * Comment this macro to disallow using RSASSA-PSS in certificates.
- */
-#define MBEDTLS_X509_RSASSA_PSS_SUPPORT
-
-/**
- * \def MBEDTLS_ZLIB_SUPPORT
- *
- * If set, the SSL/TLS module uses ZLIB to support compression and
- * decompression of packet data.
- *
- * \warning TLS-level compression MAY REDUCE SECURITY! See for example the
- * CRIME attack. Before enabling this option, you should examine with care if
- * CRIME or similar exploits may be a applicable to your use case.
- *
- * \note Currently compression can't be used with DTLS.
- *
- * \deprecated This feature is deprecated and will be removed
- *             in the next major revision of the library.
- *
- * Used in: library/ssl_tls.c
- *          library/ssl_cli.c
- *          library/ssl_srv.c
- *
- * This feature requires zlib library and headers to be present.
- *
- * Uncomment to enable use of ZLIB
- */
-//#define MBEDTLS_ZLIB_SUPPORT
 /* \} name SECTION: mbed TLS feature support */
 
 /**
@@ -2030,20 +1242,6 @@
 #define MBEDTLS_CTR_DRBG_C
 
 /**
- * \def MBEDTLS_DEBUG_C
- *
- * Enable the debug functions.
- *
- * Module:  library/debug.c
- * Caller:  library/ssl_cli.c
- *          library/ssl_srv.c
- *          library/ssl_tls.c
- *
- * This module provides debugging functions.
- */
-#define MBEDTLS_DEBUG_C
-
-/**
  * \def MBEDTLS_DES_C
  *
  * Enable the DES block cipher.
@@ -2141,7 +1339,7 @@
  *
  * Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C
  */
-//#define MBEDTLS_ECJPAKE_C
+#define MBEDTLS_ECJPAKE_C
 
 /**
  * \def MBEDTLS_ECP_C
@@ -2289,7 +1487,7 @@
  *            it, and considering stronger message digests instead.
  *
  */
-//#define MBEDTLS_MD2_C
+#define MBEDTLS_MD2_C
 
 /**
  * \def MBEDTLS_MD4_C
@@ -2306,7 +1504,7 @@
  *            it, and considering stronger message digests instead.
  *
  */
-//#define MBEDTLS_MD4_C
+#define MBEDTLS_MD4_C
 
 /**
  * \def MBEDTLS_MD5_C
@@ -2347,25 +1545,6 @@
 //#define MBEDTLS_MEMORY_BUFFER_ALLOC_C
 
 /**
- * \def MBEDTLS_NET_C
- *
- * Enable the TCP and UDP over IPv6/IPv4 networking routines.
- *
- * \note This module only works on POSIX/Unix (including Linux, BSD and OS X)
- * and Windows. For other platforms, you'll want to disable it, and write your
- * own networking callbacks to be passed to \c mbedtls_ssl_set_bio().
- *
- * \note See also our Knowledge Base article about porting to a new
- * environment:
- * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
- *
- * Module:  library/net_sockets.c
- *
- * This module provides networking routines.
- */
-#define MBEDTLS_NET_C
-
-/**
  * \def MBEDTLS_OID_C
  *
  * Enable the OID database.
@@ -2400,7 +1579,7 @@
  *
  * This modules adds support for the VIA PadLock on x86.
  */
-#define MBEDTLS_PADLOCK_C
+//#define MBEDTLS_PADLOCK_C
 
 /**
  * \def MBEDTLS_PEM_PARSE_C
@@ -2652,84 +1831,6 @@
 #define MBEDTLS_SHA512_C
 
 /**
- * \def MBEDTLS_SSL_CACHE_C
- *
- * Enable simple SSL cache implementation.
- *
- * Module:  library/ssl_cache.c
- * Caller:
- *
- * Requires: MBEDTLS_SSL_CACHE_C
- */
-#define MBEDTLS_SSL_CACHE_C
-
-/**
- * \def MBEDTLS_SSL_COOKIE_C
- *
- * Enable basic implementation of DTLS cookies for hello verification.
- *
- * Module:  library/ssl_cookie.c
- * Caller:
- */
-#define MBEDTLS_SSL_COOKIE_C
-
-/**
- * \def MBEDTLS_SSL_TICKET_C
- *
- * Enable an implementation of TLS server-side callbacks for session tickets.
- *
- * Module:  library/ssl_ticket.c
- * Caller:
- *
- * Requires: MBEDTLS_CIPHER_C
- */
-#define MBEDTLS_SSL_TICKET_C
-
-/**
- * \def MBEDTLS_SSL_CLI_C
- *
- * Enable the SSL/TLS client code.
- *
- * Module:  library/ssl_cli.c
- * Caller:
- *
- * Requires: MBEDTLS_SSL_TLS_C
- *
- * This module is required for SSL/TLS client support.
- */
-#define MBEDTLS_SSL_CLI_C
-
-/**
- * \def MBEDTLS_SSL_SRV_C
- *
- * Enable the SSL/TLS server code.
- *
- * Module:  library/ssl_srv.c
- * Caller:
- *
- * Requires: MBEDTLS_SSL_TLS_C
- *
- * This module is required for SSL/TLS server support.
- */
-#define MBEDTLS_SSL_SRV_C
-
-/**
- * \def MBEDTLS_SSL_TLS_C
- *
- * Enable the generic SSL/TLS code.
- *
- * Module:  library/ssl_tls.c
- * Caller:  library/ssl_cli.c
- *          library/ssl_srv.c
- *
- * Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C
- *           and at least one of the MBEDTLS_SSL_PROTO_XXX defines
- *
- * This module is required for SSL/TLS.
- */
-#define MBEDTLS_SSL_TLS_C
-
-/**
  * \def MBEDTLS_THREADING_C
  *
  * Enable the threading abstraction layer.
@@ -2752,29 +1853,6 @@
 //#define MBEDTLS_THREADING_C
 
 /**
- * \def MBEDTLS_TIMING_C
- *
- * Enable the semi-portable timing interface.
- *
- * \note The provided implementation only works on POSIX/Unix (including Linux,
- * BSD and OS X) and Windows. On other platforms, you can either disable that
- * module and provide your own implementations of the callbacks needed by
- * \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide
- * your own implementation of the whole module by setting
- * \c MBEDTLS_TIMING_ALT in the current file.
- *
- * \note See also our Knowledge Base article about porting to a new
- * environment:
- * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
- *
- * Module:  library/timing.c
- * Caller:  library/havege.c
- *
- * This module is used by the HAVEGE random number generator.
- */
-#define MBEDTLS_TIMING_C
-
-/**
  * \def MBEDTLS_VERSION_C
  *
  * Enable run-time version information.
@@ -2786,106 +1864,6 @@
 #define MBEDTLS_VERSION_C
 
 /**
- * \def MBEDTLS_X509_USE_C
- *
- * Enable X.509 core for using certificates.
- *
- * Module:  library/x509.c
- * Caller:  library/x509_crl.c
- *          library/x509_crt.c
- *          library/x509_csr.c
- *
- * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C,
- *           MBEDTLS_PK_PARSE_C
- *
- * This module is required for the X.509 parsing modules.
- */
-#define MBEDTLS_X509_USE_C
-
-/**
- * \def MBEDTLS_X509_CRT_PARSE_C
- *
- * Enable X.509 certificate parsing.
- *
- * Module:  library/x509_crt.c
- * Caller:  library/ssl_cli.c
- *          library/ssl_srv.c
- *          library/ssl_tls.c
- *
- * Requires: MBEDTLS_X509_USE_C
- *
- * This module is required for X.509 certificate parsing.
- */
-#define MBEDTLS_X509_CRT_PARSE_C
-
-/**
- * \def MBEDTLS_X509_CRL_PARSE_C
- *
- * Enable X.509 CRL parsing.
- *
- * Module:  library/x509_crl.c
- * Caller:  library/x509_crt.c
- *
- * Requires: MBEDTLS_X509_USE_C
- *
- * This module is required for X.509 CRL parsing.
- */
-#define MBEDTLS_X509_CRL_PARSE_C
-
-/**
- * \def MBEDTLS_X509_CSR_PARSE_C
- *
- * Enable X.509 Certificate Signing Request (CSR) parsing.
- *
- * Module:  library/x509_csr.c
- * Caller:  library/x509_crt_write.c
- *
- * Requires: MBEDTLS_X509_USE_C
- *
- * This module is used for reading X.509 certificate request.
- */
-#define MBEDTLS_X509_CSR_PARSE_C
-
-/**
- * \def MBEDTLS_X509_CREATE_C
- *
- * Enable X.509 core for creating certificates.
- *
- * Module:  library/x509_create.c
- *
- * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C
- *
- * This module is the basis for creating X.509 certificates and CSRs.
- */
-#define MBEDTLS_X509_CREATE_C
-
-/**
- * \def MBEDTLS_X509_CRT_WRITE_C
- *
- * Enable creating X.509 certificates.
- *
- * Module:  library/x509_crt_write.c
- *
- * Requires: MBEDTLS_X509_CREATE_C
- *
- * This module is required for X.509 certificate creation.
- */
-#define MBEDTLS_X509_CRT_WRITE_C
-
-/**
- * \def MBEDTLS_X509_CSR_WRITE_C
- *
- * Enable creating X.509 Certificate Signing Requests (CSR).
- *
- * Module:  library/x509_csr_write.c
- *
- * Requires: MBEDTLS_X509_CREATE_C
- *
- * This module is required for X.509 certificate request writing.
- */
-#define MBEDTLS_X509_CSR_WRITE_C
-
-/**
  * \def MBEDTLS_XTEA_C
  *
  * Enable the XTEA block cipher.
@@ -3134,6 +2112,6 @@
 #include MBEDTLS_USER_CONFIG_FILE
 #endif
 
-#include "check_config.h"
+#include "mbedtls/check_config.h"
 
 #endif /* MBEDTLS_CONFIG_H */