diff --git a/.gitignore b/.gitignore
index 6068cbc..2917cfb 100644
--- a/.gitignore
+++ b/.gitignore
@@ -35,6 +35,7 @@
 
 # Unix-like build artifacts:
 *.o
+*.s
 
 # MSVC build artifacts:
 *.exe
diff --git a/BRANCHES.md b/BRANCHES.md
index 9d5d779..cf86a9d 100644
--- a/BRANCHES.md
+++ b/BRANCHES.md
@@ -107,7 +107,7 @@
 - [`development`](https://github.com/Mbed-TLS/mbedtls/)
 - [`mbedtls-3.6`](https://github.com/Mbed-TLS/mbedtls/tree/mbedtls-3.6)
  maintained until March 2027, see
-  <https://github.com/Mbed-TLS/mbedtls/releases/tag/v3.6.1>.
+  <https://github.com/Mbed-TLS/mbedtls/releases/tag/v3.6.2>.
 - [`mbedtls-2.28`](https://github.com/Mbed-TLS/mbedtls/tree/mbedtls-2.28)
  maintained until the end of 2024, see
   <https://github.com/Mbed-TLS/mbedtls/releases/tag/v2.28.9>.
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 6aed3d3..6c10580 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -40,12 +40,12 @@
 if(TEST_CPP)
     project("Mbed TLS"
         LANGUAGES C CXX
-        VERSION 3.6.1
+        VERSION 3.6.2
     )
 else()
     project("Mbed TLS"
         LANGUAGES C
-        VERSION 3.6.1
+        VERSION 3.6.2
     )
 endif()
 
@@ -229,7 +229,21 @@
     set(CMAKE_C_FLAGS_RELEASE     "-O2")
     set(CMAKE_C_FLAGS_DEBUG       "-O0 -g3")
     set(CMAKE_C_FLAGS_COVERAGE    "-O0 -g3 --coverage")
-    set(CMAKE_C_FLAGS_ASAN        "-fsanitize=address -fno-common -fsanitize=undefined -fno-sanitize-recover=all -O3")
+    # Old GCC versions hit a performance problem with test_suite_pkwrite
+    # "Private keey write check EC" tests when building with Asan+UBSan
+    # and -O3: those tests take more than 100x time than normal, with
+    # test_suite_pkwrite taking >3h on the CI. Observed with GCC 5.4 on
+    # Ubuntu 16.04 x86_64 and GCC 6.5 on Ubuntu 18.04 x86_64.
+    # GCC 7.5 and above on Ubuntu 18.04 appear fine.
+    # To avoid the performance problem, we use -O2 when GCC version is lower than 7.0.
+    # It doesn't slow down much even with modern compiler versions.
+    if (GCC_VERSION VERSION_LESS 7.0)
+        message(STATUS "USING O2")
+        set(CMAKE_C_FLAGS_ASAN        "-fsanitize=address -fno-common -fsanitize=undefined -fno-sanitize-recover=all -O2")
+    else()
+        message(STATUS "USING O3")
+        set(CMAKE_C_FLAGS_ASAN        "-fsanitize=address -fno-common -fsanitize=undefined -fno-sanitize-recover=all -O3")
+    endif()
     set(CMAKE_C_FLAGS_ASANDBG     "-fsanitize=address -fno-common -fsanitize=undefined -fno-sanitize-recover=all -O1 -g3 -fno-omit-frame-pointer -fno-optimize-sibling-calls")
     set(CMAKE_C_FLAGS_TSAN        "-fsanitize=thread -O3")
     set(CMAKE_C_FLAGS_TSANDBG     "-fsanitize=thread -O1 -g3 -fno-omit-frame-pointer -fno-optimize-sibling-calls")
@@ -452,7 +466,7 @@
     write_basic_package_version_file(
         "cmake/MbedTLSConfigVersion.cmake"
             COMPATIBILITY SameMajorVersion
-            VERSION 3.6.1)
+            VERSION 3.6.2)
 
     install(
         FILES "${CMAKE_CURRENT_BINARY_DIR}/cmake/MbedTLSConfig.cmake"
diff --git a/ChangeLog b/ChangeLog
index 8eb43fe..a88c9c5 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,16 @@
 Mbed TLS ChangeLog (Sorted per branch, date)
 
+= Mbed TLS 3.6.2 branch released 2024-10-14
+
+Security
+   * Fix a buffer underrun in mbedtls_pk_write_key_der() when
+     called on an opaque key, MBEDTLS_USE_PSA_CRYPTO is enabled,
+     and the output buffer is smaller than the actual output.
+     Fix a related buffer underrun in mbedtls_pk_write_key_pem()
+     when called on an opaque RSA key, MBEDTLS_USE_PSA_CRYPTO is enabled
+     and MBEDTLS_MPI_MAX_SIZE is smaller than needed for a 4096-bit RSA key.
+     CVE-2024-49195
+
 = Mbed TLS 3.6.1 branch released 2024-08-30
 
 API changes
diff --git a/ChangeLog.d/9302.txt b/ChangeLog.d/9302.txt
new file mode 100644
index 0000000..d61ba19
--- /dev/null
+++ b/ChangeLog.d/9302.txt
@@ -0,0 +1,6 @@
+Features
+   * Added new configuration option MBEDTLS_PSA_STATIC_KEY_SLOTS, which
+     uses static storage for keys, enabling malloc-less use of key slots.
+     The size of each buffer is given by the option
+     MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE. By default it accommodates the
+     largest PSA key enabled in the build.
diff --git a/ChangeLog.d/fix-driver-schema-check.txt b/ChangeLog.d/fix-driver-schema-check.txt
new file mode 100644
index 0000000..9b6d8ac
--- /dev/null
+++ b/ChangeLog.d/fix-driver-schema-check.txt
@@ -0,0 +1,3 @@
+Bugfix
+   * Fix invalid JSON schemas for driver descriptions used by
+     generate_driver_wrappers.py.
diff --git a/ChangeLog.d/replace-close-with-mbedtls_net_close.txt b/ChangeLog.d/replace-close-with-mbedtls_net_close.txt
new file mode 100644
index 0000000..213cf55
--- /dev/null
+++ b/ChangeLog.d/replace-close-with-mbedtls_net_close.txt
@@ -0,0 +1,4 @@
+Bugfix
+   * Use 'mbedtls_net_close' instead of 'close' in 'mbedtls_net_bind'
+     and 'mbedtls_net_connect' to prevent possible double close fd
+     problems. Fixes #9711.
diff --git a/docs/architecture/psa-keystore-design.md b/docs/architecture/psa-keystore-design.md
index cdd2cac..be082a8 100644
--- a/docs/architecture/psa-keystore-design.md
+++ b/docs/architecture/psa-keystore-design.md
@@ -67,7 +67,7 @@
 There are three variants of the key store implementation, responding to different needs.
 
 * Hybrid key store ([static key slots](#static-key-store) with dynamic key data): the key store is a statically allocated array of slots, of size `MBEDTLS_PSA_KEY_SLOT_COUNT`. Key material is allocated on the heap. This is the historical implementation. It remains the default in the Mbed TLS 3.6 long-time support (LTS) branch when using a handwritten `mbedtls_config.h`, as is common on resource-constrained platforms, because the alternatives have tradeoffs (key size limit and larger RAM usage at rest for the static key store, larger code size and more risk due to code complexity for the dynamic key store).
-* Fully [static key store](#static-key-store) (since Mbed TLS 3.6.2): the key store is a statically allocated array of slots, of size `MBEDTLS_PSA_KEY_SLOT_COUNT`. Each key slot contains the key representation directly, and the key representation must be no more than `MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE` bytes. This is intended for very constrained devices that do not have a heap.
+* Fully [static key store](#static-key-store) (since Mbed TLS 3.6.3): the key store is a statically allocated array of slots, of size `MBEDTLS_PSA_KEY_SLOT_COUNT`. Each key slot contains the key representation directly, and the key representation must be no more than `MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE` bytes. This is intended for very constrained devices that do not have a heap.
 * [Dynamic key store](#dynamic-key-store) (since Mbed TLS 3.6.1): the key store is dynamically allocated as multiple slices on the heap, with a size that adjusts to the application's usage. Key material is allocated on the heap. Compared to the hybrid key store, the code size and RAM consumption are larger. This is intended for higher-end devices where applications are not expected to have a highly predicatable resource usage. This is the default implementation when using the default `mbedtls_config.h` file, as is common on platforms such as Linux, starting with Mbed TLS 3.6.1.
 
 #### Future improvement: merging the key store variants
@@ -95,7 +95,7 @@
 
 The static key store is the historical implementation. The key store is a statically allocated array of slots, of size `MBEDTLS_PSA_KEY_SLOT_COUNT`. This value is an upper bound for the total number of volatile keys plus loaded keys.
 
-Since Mbed TLS 3.6.2, there are two variants for the static key store: a hybrid variant (default), and a fully-static variant enabled by the configuration option `MBEDTLS_PSA_STATIC_KEY_SLOTS`. The two variants have the same key store management: the only difference is in how the memory for key data is managed. With fully static key slots, the key data is directly inside the slot, and limited to `MBEDTLS_PSA_KEY_SLOT_BUFFER_SIZE` bytes. With the hybrid key store, the slot contains a pointer to the key data, which is allocated on the heap.
+Since Mbed TLS 3.6.3, there are two variants for the static key store: a hybrid variant (default), and a fully-static variant enabled by the configuration option `MBEDTLS_PSA_STATIC_KEY_SLOTS`. The two variants have the same key store management: the only difference is in how the memory for key data is managed. With fully static key slots, the key data is directly inside the slot, and limited to `MBEDTLS_PSA_KEY_SLOT_BUFFER_SIZE` bytes. With the hybrid key store, the slot contains a pointer to the key data, which is allocated on the heap.
 
 #### Volatile key identifiers in the static key store
 
diff --git a/docs/architecture/testing/test-framework.md b/docs/architecture/testing/test-framework.md
index 80667df..a9e3dac 100644
--- a/docs/architecture/testing/test-framework.md
+++ b/docs/architecture/testing/test-framework.md
@@ -22,7 +22,7 @@
 * Make the description descriptive. “foo: x=2, y=4” is more descriptive than “foo #2”. “foo: 0<x<y, both even” is even better if these inequalities and parities are why this particular test data was chosen.
 * Avoid changing the description of an existing test case without a good reason. This breaks the tracking of failures across CI runs, since this tracking is based on the descriptions.
 
-`tests/scripts/check_test_cases.py` enforces some rules and warns if some guidelines are violated.
+`framework/scripts/check_test_cases.py` enforces some rules and warns if some guidelines are violated.
 
 ## TLS tests
 
diff --git a/doxygen/input/doc_mainpage.h b/doxygen/input/doc_mainpage.h
index 740bb19..d872818 100644
--- a/doxygen/input/doc_mainpage.h
+++ b/doxygen/input/doc_mainpage.h
@@ -10,7 +10,7 @@
  */
 
 /**
- * @mainpage Mbed TLS v3.6.1 API Documentation
+ * @mainpage Mbed TLS v3.6.2 API Documentation
  *
  * This documentation describes the internal structure of Mbed TLS.  It was
  * automatically generated from specially formatted comment blocks in
diff --git a/doxygen/mbedtls.doxyfile b/doxygen/mbedtls.doxyfile
index 2a82820..281f062 100644
--- a/doxygen/mbedtls.doxyfile
+++ b/doxygen/mbedtls.doxyfile
@@ -1,4 +1,4 @@
-PROJECT_NAME           = "Mbed TLS v3.6.1"
+PROJECT_NAME           = "Mbed TLS v3.6.2"
 OUTPUT_DIRECTORY       = ../apidoc/
 FULL_PATH_NAMES        = NO
 OPTIMIZE_OUTPUT_FOR_C  = YES
diff --git a/framework b/framework
index 33ac133..d68446c 160000
--- a/framework
+++ b/framework
@@ -1 +1 @@
-Subproject commit 33ac13321737c333f52659ee848ca25746588227
+Subproject commit d68446c9da02e536279a7aaa5a3c9850742ba30c
diff --git a/include/mbedtls/build_info.h b/include/mbedtls/build_info.h
index 8242ec6..d91d296 100644
--- a/include/mbedtls/build_info.h
+++ b/include/mbedtls/build_info.h
@@ -26,16 +26,16 @@
  */
 #define MBEDTLS_VERSION_MAJOR  3
 #define MBEDTLS_VERSION_MINOR  6
-#define MBEDTLS_VERSION_PATCH  1
+#define MBEDTLS_VERSION_PATCH  2
 
 /**
  * The single version number has the following structure:
  *    MMNNPP00
  *    Major version | Minor version | Patch version
  */
-#define MBEDTLS_VERSION_NUMBER         0x03060100
-#define MBEDTLS_VERSION_STRING         "3.6.1"
-#define MBEDTLS_VERSION_STRING_FULL    "Mbed TLS 3.6.1"
+#define MBEDTLS_VERSION_NUMBER         0x03060200
+#define MBEDTLS_VERSION_STRING         "3.6.2"
+#define MBEDTLS_VERSION_STRING_FULL    "Mbed TLS 3.6.2"
 
 /* Macros for build-time platform detection */
 
diff --git a/include/mbedtls/check_config.h b/include/mbedtls/check_config.h
index c80e286..aec5050 100644
--- a/include/mbedtls/check_config.h
+++ b/include/mbedtls/check_config.h
@@ -741,6 +741,11 @@
 #error "MBEDTLS_PSA_INJECT_ENTROPY is not compatible with MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG"
 #endif
 
+#if defined(MBEDTLS_PSA_KEY_STORE_DYNAMIC) &&           \
+    defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+#error "MBEDTLS_PSA_KEY_STORE_DYNAMIC and MBEDTLS_PSA_STATIC_KEY_SLOTS cannot be defined simultaneously"
+#endif
+
 #if defined(MBEDTLS_PSA_ITS_FILE_C) && \
     !defined(MBEDTLS_FS_IO)
 #error "MBEDTLS_PSA_ITS_FILE_C defined, but not all prerequisites"
diff --git a/include/mbedtls/entropy.h b/include/mbedtls/entropy.h
index 20fd687..6c64e3e 100644
--- a/include/mbedtls/entropy.h
+++ b/include/mbedtls/entropy.h
@@ -17,12 +17,13 @@
 
 #include "md.h"
 
-#if defined(MBEDTLS_MD_CAN_SHA512) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256)
+#if (defined(MBEDTLS_MD_CAN_SHA512) || defined(PSA_WANT_ALG_SHA_512)) && \
+    !defined(MBEDTLS_ENTROPY_FORCE_SHA256)
 #define MBEDTLS_ENTROPY_SHA512_ACCUMULATOR
 #define MBEDTLS_ENTROPY_MD  MBEDTLS_MD_SHA512
 #define MBEDTLS_ENTROPY_BLOCK_SIZE      64      /**< Block size of entropy accumulator (SHA-512) */
 #else
-#if defined(MBEDTLS_MD_CAN_SHA256)
+#if (defined(MBEDTLS_MD_CAN_SHA256) || defined(PSA_WANT_ALG_SHA_256))
 #define MBEDTLS_ENTROPY_SHA256_ACCUMULATOR
 #define MBEDTLS_ENTROPY_MD  MBEDTLS_MD_SHA256
 #define MBEDTLS_ENTROPY_BLOCK_SIZE      32      /**< Block size of entropy accumulator (SHA-256) */
diff --git a/include/mbedtls/mbedtls_config.h b/include/mbedtls/mbedtls_config.h
index bd3f71d..ebc9276 100644
--- a/include/mbedtls/mbedtls_config.h
+++ b/include/mbedtls/mbedtls_config.h
@@ -3269,6 +3269,26 @@
 #define MBEDTLS_PSA_ITS_FILE_C
 
 /**
+ * \def MBEDTLS_PSA_STATIC_KEY_SLOTS
+ *
+ * Statically preallocate memory to store keys' material in PSA instead
+ * of allocating it dynamically when required. This allows builds without a
+ * heap, if none of the enabled cryptographic implementations or other features
+ * require it.
+ * This feature affects both volatile and persistent keys which means that
+ * it's not possible to persistently store a key which is larger than
+ * #MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE.
+ *
+ * \note This feature comes with a (potentially) higher RAM usage since:
+ *       - All the key slots are allocated no matter if they are used or not.
+ *       - Each key buffer's length is #MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE bytes.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C
+ *
+ */
+//#define MBEDTLS_PSA_STATIC_KEY_SLOTS
+
+/**
  * \def MBEDTLS_RIPEMD160_C
  *
  * Enable the RIPEMD-160 hash algorithm.
@@ -4069,6 +4089,19 @@
  */
 //#define MBEDTLS_PSA_KEY_SLOT_COUNT 32
 
+/**
+ * \def MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE
+ *
+ * Define the size (in bytes) of each static key buffer when
+ * #MBEDTLS_PSA_STATIC_KEY_SLOTS is set. If not
+ * explicitly defined then it's automatically guessed from available PSA keys
+ * enabled in the build through PSA_WANT_xxx symbols.
+ * If required by the application this parameter can be set to higher values
+ * in order to store larger objects (ex: raw keys), but please note that this
+ * will increase RAM usage.
+ */
+//#define MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE       256
+
 /* RSA OPTIONS */
 //#define MBEDTLS_RSA_GEN_KEY_MIN_BITS            1024 /**<  Minimum RSA key size that can be generated in bits (Minimum possible value is 128 bits) */
 
diff --git a/include/psa/crypto_extra.h b/include/psa/crypto_extra.h
index 0cf42c6..f48c087 100644
--- a/include/psa/crypto_extra.h
+++ b/include/psa/crypto_extra.h
@@ -32,6 +32,16 @@
 #define MBEDTLS_PSA_KEY_SLOT_COUNT 32
 #endif
 
+/* If the size of static key slots is not explicitly defined by the user, then
+ * set it to the maximum between PSA_EXPORT_KEY_PAIR_OR_PUBLIC_MAX_SIZE and
+ * PSA_CIPHER_MAX_KEY_LENGTH.
+ * See mbedtls_config.h for the definition. */
+#if !defined(MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE)
+#define MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE  \
+    ((PSA_EXPORT_KEY_PAIR_OR_PUBLIC_MAX_SIZE > PSA_CIPHER_MAX_KEY_LENGTH) ? \
+     PSA_EXPORT_KEY_PAIR_OR_PUBLIC_MAX_SIZE : PSA_CIPHER_MAX_KEY_LENGTH)
+#endif /* !MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE*/
+
 /** \addtogroup attributes
  * @{
  */
diff --git a/include/psa/crypto_sizes.h b/include/psa/crypto_sizes.h
index 635ee98..87b8c39 100644
--- a/include/psa/crypto_sizes.h
+++ b/include/psa/crypto_sizes.h
@@ -1038,6 +1038,10 @@
     PSA_KEY_EXPORT_FFDH_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_FFDH_MAX_KEY_BITS)
 #endif
 
+#define PSA_EXPORT_KEY_PAIR_OR_PUBLIC_MAX_SIZE \
+    ((PSA_EXPORT_KEY_PAIR_MAX_SIZE > PSA_EXPORT_PUBLIC_KEY_MAX_SIZE) ? \
+     PSA_EXPORT_KEY_PAIR_MAX_SIZE : PSA_EXPORT_PUBLIC_KEY_MAX_SIZE)
+
 /** Sufficient output buffer size for psa_raw_key_agreement().
  *
  * This macro returns a compile-time constant if its arguments are
@@ -1085,6 +1089,27 @@
 #define PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE    PSA_BITS_TO_BYTES(PSA_VENDOR_FFDH_MAX_KEY_BITS)
 #endif
 
+/** Maximum key length for ciphers.
+ *
+ * Since there is no additional PSA_WANT_xxx symbol to specifiy the size of
+ * the key once a cipher is enabled (as it happens for asymmetric keys for
+ * example), the maximum key length is taken into account for each cipher.
+ * The resulting value will be the maximum cipher's key length given depending
+ * on which ciphers are enabled.
+ *
+ * Note: max value for AES used below would be doubled if XTS were enabled, but
+ *       this mode is currently not supported in Mbed TLS implementation of PSA
+ *       APIs.
+ */
+#if (defined(PSA_WANT_KEY_TYPE_AES) || defined(PSA_WANT_KEY_TYPE_ARIA) || \
+    defined(PSA_WANT_KEY_TYPE_CAMELLIA) || defined(PSA_WANT_KEY_TYPE_CHACHA20))
+#define PSA_CIPHER_MAX_KEY_LENGTH       32u
+#elif defined(PSA_WANT_KEY_TYPE_DES)
+#define PSA_CIPHER_MAX_KEY_LENGTH       24u
+#else
+#define PSA_CIPHER_MAX_KEY_LENGTH       0u
+#endif
+
 /** The default IV size for a cipher algorithm, in bytes.
  *
  * The IV that is generated as part of a call to #psa_cipher_encrypt() is always
diff --git a/library/CMakeLists.txt b/library/CMakeLists.txt
index e4d8f0d..4be9a54 100644
--- a/library/CMakeLists.txt
+++ b/library/CMakeLists.txt
@@ -166,11 +166,11 @@
             ${CMAKE_CURRENT_BINARY_DIR}/ssl_debug_helpers_generated.c
         COMMAND
             ${MBEDTLS_PYTHON_EXECUTABLE}
-                ${CMAKE_CURRENT_SOURCE_DIR}/../scripts/generate_ssl_debug_helpers.py
+                ${CMAKE_CURRENT_SOURCE_DIR}/../framework/scripts/generate_ssl_debug_helpers.py
                 --mbedtls-root ${CMAKE_CURRENT_SOURCE_DIR}/..
                 ${CMAKE_CURRENT_BINARY_DIR}
         DEPENDS
-            ${CMAKE_CURRENT_SOURCE_DIR}/../scripts/generate_ssl_debug_helpers.py
+            ${CMAKE_CURRENT_SOURCE_DIR}/../framework/scripts/generate_ssl_debug_helpers.py
             ${error_headers}
     )
 
@@ -300,7 +300,7 @@
 if(USE_SHARED_MBEDTLS_LIBRARY)
     set(CMAKE_LIBRARY_PATH ${CMAKE_CURRENT_BINARY_DIR})
     add_library(${mbedcrypto_target} SHARED ${src_crypto})
-    set_target_properties(${mbedcrypto_target} PROPERTIES VERSION 3.6.1 SOVERSION 16)
+    set_target_properties(${mbedcrypto_target} PROPERTIES VERSION 3.6.2 SOVERSION 16)
     target_link_libraries(${mbedcrypto_target} PUBLIC ${libs})
 
     if(TARGET ${everest_target})
@@ -312,11 +312,11 @@
     endif()
 
     add_library(${mbedx509_target} SHARED ${src_x509})
-    set_target_properties(${mbedx509_target} PROPERTIES VERSION 3.6.1 SOVERSION 7)
+    set_target_properties(${mbedx509_target} PROPERTIES VERSION 3.6.2 SOVERSION 7)
     target_link_libraries(${mbedx509_target} PUBLIC ${libs} ${mbedcrypto_target})
 
     add_library(${mbedtls_target} SHARED ${src_tls})
-    set_target_properties(${mbedtls_target} PROPERTIES VERSION 3.6.1 SOVERSION 21)
+    set_target_properties(${mbedtls_target} PROPERTIES VERSION 3.6.2 SOVERSION 21)
     target_link_libraries(${mbedtls_target} PUBLIC ${libs} ${mbedx509_target})
 endif(USE_SHARED_MBEDTLS_LIBRARY)
 
diff --git a/library/Makefile b/library/Makefile
index 388fcea..eb3b901 100644
--- a/library/Makefile
+++ b/library/Makefile
@@ -337,6 +337,10 @@
 	echo "  CC    $<"
 	$(CC) $(LOCAL_CFLAGS) $(CFLAGS) -o $@ -c $<
 
+.c.s:
+	echo "  CC    $<"
+	$(CC) $(LOCAL_CFLAGS) $(CFLAGS) -S -o $@ -c $<
+
 .PHONY: generated_files
 generated_files: $(GENERATED_FILES)
 
@@ -355,11 +359,11 @@
 	echo "  Gen   $@"
 	$(PERL) ../scripts/generate_errors.pl
 
-ssl_debug_helpers_generated.c: $(gen_file_dep) ../scripts/generate_ssl_debug_helpers.py
+ssl_debug_helpers_generated.c: $(gen_file_dep) ../framework/scripts/generate_ssl_debug_helpers.py
 ssl_debug_helpers_generated.c: $(gen_file_dep) $(filter-out %config%,$(wildcard ../include/mbedtls/*.h))
 ssl_debug_helpers_generated.c:
 	echo "  Gen   $@"
-	$(PYTHON) ../scripts/generate_ssl_debug_helpers.py --mbedtls-root .. .
+	$(PYTHON) ../framework/scripts/generate_ssl_debug_helpers.py --mbedtls-root .. .
 
 version_features.c: $(gen_file_dep) ../scripts/generate_features.pl
 version_features.c: $(gen_file_dep) ../scripts/data_files/version_features.fmt
@@ -387,12 +391,13 @@
 
 clean:
 ifndef WINDOWS
-	rm -f *.o libmbed*
-	rm -f $(THIRDPARTY_CRYPTO_OBJECTS)
+	rm -f *.o *.s libmbed*
+	rm -f $(THIRDPARTY_CRYPTO_OBJECTS) $(THIRDPARTY_CRYPTO_OBJECTS:.o=.s)
 else
 	if exist *.o del /Q /F *.o
+	if exist *.s del /Q /F *.s
 	if exist libmbed* del /Q /F libmbed*
-	del /Q /F del_errors_out_if_the_file_list_is_empty_but_not_if_a_file_does_not_exist $(subst /,\,$(THIRDPARTY_CRYPTO_OBJECTS))
+	del /Q /F del_errors_out_if_the_file_list_is_empty_but_not_if_a_file_does_not_exist $(subst /,\,$(THIRDPARTY_CRYPTO_OBJECTS) $(THIRDPARTY_CRYPTO_OBJECTS:.o=.s))
 endif
 
 neat: clean
diff --git a/library/net_sockets.c b/library/net_sockets.c
index ef89a88..bd5c47b 100644
--- a/library/net_sockets.c
+++ b/library/net_sockets.c
@@ -190,7 +190,7 @@
             break;
         }
 
-        close(ctx->fd);
+        mbedtls_net_close(ctx);
         ret = MBEDTLS_ERR_NET_CONNECT_FAILED;
     }
 
@@ -237,13 +237,13 @@
         n = 1;
         if (setsockopt(ctx->fd, SOL_SOCKET, SO_REUSEADDR,
                        (const char *) &n, sizeof(n)) != 0) {
-            close(ctx->fd);
+            mbedtls_net_close(ctx);
             ret = MBEDTLS_ERR_NET_SOCKET_FAILED;
             continue;
         }
 
         if (bind(ctx->fd, cur->ai_addr, MSVC_INT_CAST cur->ai_addrlen) != 0) {
-            close(ctx->fd);
+            mbedtls_net_close(ctx);
             ret = MBEDTLS_ERR_NET_BIND_FAILED;
             continue;
         }
@@ -251,7 +251,7 @@
         /* Listen only makes sense for TCP */
         if (proto == MBEDTLS_NET_PROTO_TCP) {
             if (listen(ctx->fd, MBEDTLS_NET_LISTEN_BACKLOG) != 0) {
-                close(ctx->fd);
+                mbedtls_net_close(ctx);
                 ret = MBEDTLS_ERR_NET_LISTEN_FAILED;
                 continue;
             }
diff --git a/library/pk.c b/library/pk.c
index 3fe51ea..51f0c24 100644
--- a/library/pk.c
+++ b/library/pk.c
@@ -35,10 +35,6 @@
 #include <limits.h>
 #include <stdint.h>
 
-#define PSA_EXPORT_KEY_PAIR_OR_PUBLIC_MAX_SIZE \
-    (PSA_EXPORT_KEY_PAIR_MAX_SIZE > PSA_EXPORT_PUBLIC_KEY_MAX_SIZE) ? \
-    PSA_EXPORT_KEY_PAIR_MAX_SIZE : PSA_EXPORT_PUBLIC_KEY_MAX_SIZE
-
 /*
  * Initialise a mbedtls_pk_context
  */
diff --git a/library/pkwrite.c b/library/pkwrite.c
index 5e009c5..2a69844 100644
--- a/library/pkwrite.c
+++ b/library/pkwrite.c
@@ -65,17 +65,21 @@
 #if defined(MBEDTLS_USE_PSA_CRYPTO)
     if (mbedtls_pk_get_type(pk) == MBEDTLS_PK_OPAQUE) {
         uint8_t tmp[PSA_EXPORT_KEY_PAIR_MAX_SIZE];
-        size_t len = 0, tmp_len = 0;
+        size_t tmp_len = 0;
 
         if (psa_export_key(pk->priv_id, tmp, sizeof(tmp), &tmp_len) != PSA_SUCCESS) {
             return MBEDTLS_ERR_PK_BAD_INPUT_DATA;
         }
+        /* Ensure there's enough space in the provided buffer before copying data into it. */
+        if (tmp_len > (size_t) (*p - buf)) {
+            mbedtls_platform_zeroize(tmp, sizeof(tmp));
+            return MBEDTLS_ERR_ASN1_BUF_TOO_SMALL;
+        }
         *p -= tmp_len;
         memcpy(*p, tmp, tmp_len);
-        len += tmp_len;
         mbedtls_platform_zeroize(tmp, sizeof(tmp));
 
-        return (int) len;
+        return (int) tmp_len;
     }
 #endif /* MBEDTLS_USE_PSA_CRYPTO */
     return mbedtls_rsa_write_key(mbedtls_pk_rsa(*pk), buf, p);
@@ -125,6 +129,10 @@
         if (psa_export_public_key(pk->priv_id, buf, sizeof(buf), &len) != PSA_SUCCESS) {
             return MBEDTLS_ERR_PK_BAD_INPUT_DATA;
         }
+        /* Ensure there's enough space in the provided buffer before copying data into it. */
+        if (len > (size_t) (*p - start)) {
+            return MBEDTLS_ERR_ASN1_BUF_TOO_SMALL;
+        }
         *p -= len;
         memcpy(*p, buf, len);
         return (int) len;
diff --git a/library/psa_crypto.c b/library/psa_crypto.c
index c4f41db..f0ccf3d 100644
--- a/library/psa_crypto.c
+++ b/library/psa_crypto.c
@@ -705,6 +705,11 @@
 psa_status_t psa_allocate_buffer_to_slot(psa_key_slot_t *slot,
                                          size_t buffer_length)
 {
+#if defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+    if (buffer_length > ((size_t) MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE)) {
+        return PSA_ERROR_NOT_SUPPORTED;
+    }
+#else
     if (slot->key.data != NULL) {
         return PSA_ERROR_ALREADY_EXISTS;
     }
@@ -713,6 +718,7 @@
     if (slot->key.data == NULL) {
         return PSA_ERROR_INSUFFICIENT_MEMORY;
     }
+#endif
 
     slot->key.bytes = buffer_length;
     return PSA_SUCCESS;
@@ -1177,11 +1183,18 @@
 
 psa_status_t psa_remove_key_data_from_memory(psa_key_slot_t *slot)
 {
+#if defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+    if (slot->key.bytes > 0) {
+        mbedtls_platform_zeroize(slot->key.data, MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE);
+    }
+#else
     if (slot->key.data != NULL) {
         mbedtls_zeroize_and_free(slot->key.data, slot->key.bytes);
     }
 
     slot->key.data = NULL;
+#endif /* MBEDTLS_PSA_STATIC_KEY_SLOTS */
+
     slot->key.bytes = 0;
 
     return PSA_SUCCESS;
@@ -2096,7 +2109,7 @@
      * storage ( thus not in the case of importing a key in a secure element
      * with storage ( MBEDTLS_PSA_CRYPTO_SE_C ) ),we have to allocate a
      * buffer to hold the imported key material. */
-    if (slot->key.data == NULL) {
+    if (slot->key.bytes == 0) {
         if (psa_key_lifetime_is_external(attributes->lifetime)) {
             status = psa_driver_wrapper_get_key_buffer_size_from_key_data(
                 attributes, data, data_length, &storage_size);
@@ -8013,7 +8026,7 @@
      * storage ( thus not in the case of generating a key in a secure element
      * with storage ( MBEDTLS_PSA_CRYPTO_SE_C ) ),we have to allocate a
      * buffer to hold the generated key material. */
-    if (slot->key.data == NULL) {
+    if (slot->key.bytes == 0) {
         if (PSA_KEY_LIFETIME_GET_LOCATION(attributes->lifetime) ==
             PSA_KEY_LOCATION_LOCAL_STORAGE) {
             status = psa_validate_key_type_and_size_for_key_generation(
diff --git a/library/psa_crypto_core.h b/library/psa_crypto_core.h
index 21e7559..df0ee50 100644
--- a/library/psa_crypto_core.h
+++ b/library/psa_crypto_core.h
@@ -155,7 +155,11 @@
     /* Dynamically allocated key data buffer.
      * Format as specified in psa_export_key(). */
     struct key_data {
+#if defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+        uint8_t data[MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE];
+#else
         uint8_t *data;
+#endif
         size_t bytes;
     } key;
 } psa_key_slot_t;
diff --git a/library/psa_crypto_storage.h b/library/psa_crypto_storage.h
index d7f5b18..433ecdc 100644
--- a/library/psa_crypto_storage.h
+++ b/library/psa_crypto_storage.h
@@ -21,9 +21,16 @@
 #include <stdint.h>
 #include <string.h>
 
-/* Limit the maximum key size in storage. This should have no effect
- * since the key size is limited in memory. */
+/* Limit the maximum key size in storage. */
+#if defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+/* Reflect the maximum size for the key buffer. */
+#define PSA_CRYPTO_MAX_STORAGE_SIZE (MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE)
+#else
+/* Just set an upper boundary but it should have no effect since the key size
+ * is limited in memory. */
 #define PSA_CRYPTO_MAX_STORAGE_SIZE (PSA_BITS_TO_BYTES(PSA_MAX_KEY_BITS))
+#endif
+
 /* Sanity check: a file size must fit in 32 bits. Allow a generous
  * 64kB of metadata. */
 #if PSA_CRYPTO_MAX_STORAGE_SIZE > 0xffff0000
diff --git a/library/ssl_misc.h b/library/ssl_misc.h
index 78ec3bd..7495ae3 100644
--- a/library/ssl_misc.h
+++ b/library/ssl_misc.h
@@ -11,6 +11,7 @@
 #define MBEDTLS_SSL_MISC_H
 
 #include "mbedtls/build_info.h"
+#include "common.h"
 
 #include "mbedtls/error.h"
 
@@ -47,7 +48,7 @@
 #include "ssl_ciphersuites_internal.h"
 #include "x509_internal.h"
 #include "pk_internal.h"
-#include "common.h"
+
 
 /* Shorthand for restartable ECC */
 #if defined(MBEDTLS_ECP_RESTARTABLE) && \
diff --git a/scripts/ci.requirements.txt b/scripts/ci.requirements.txt
index d21aa27..fc10c63 100644
--- a/scripts/ci.requirements.txt
+++ b/scripts/ci.requirements.txt
@@ -7,9 +7,13 @@
 # 2.4.4 is the version in Ubuntu 20.04. It supports Python >=3.5.
 pylint == 2.4.4
 
-# Use the earliest version of mypy that works with our code base.
-# See https://github.com/Mbed-TLS/mbedtls/pull/3953 .
-mypy >= 0.780
+# Use a version of mypy that is compatible with our code base.
+# mypy <0.940 is known not to work: see commit
+#  :/Upgrade mypy to the last version supporting Python 3.6
+# mypy >=0.960 is known not to work:
+#   https://github.com/Mbed-TLS/mbedtls-framework/issues/50
+# mypy 0.942 is the version in Ubuntu 22.04.
+mypy == 0.942
 
 # At the time of writing, only needed for tests/scripts/audit-validity-dates.py.
 # It needs >=35.0.0 for correct operation, and that requires Python >=3.6,
diff --git a/scripts/code_style.py b/scripts/code_style.py
index d3f89d9..e98fb2b 100755
--- a/scripts/code_style.py
+++ b/scripts/code_style.py
@@ -102,8 +102,10 @@
                "--name-only", "--pretty=", "--"] + src_files
         output = subprocess.check_output(cmd, universal_newlines=True)
         committed_changed_files = output.split()
+
         # ... the framework submodule
-        cmd = ["git", "-C", "framework", "log", since + "..HEAD",
+        framework_since = get_submodule_hash(since, "framework")
+        cmd = ["git", "-C", "framework", "log", framework_since + "..HEAD",
                "--name-only", "--pretty=", "--"] + framework_src_files
         output = subprocess.check_output(cmd, universal_newlines=True,
                                          env=framework_env)
@@ -135,6 +137,12 @@
                          is_file_autogenerated(filename))]
     return src_files
 
+def get_submodule_hash(commit: str, submodule: str) -> str:
+    """Get the commit hash of a submodule at a given commit in the Git repository."""
+    cmd = ["git", "ls-tree", commit, submodule]
+    output = subprocess.check_output(cmd, universal_newlines=True)
+    return output.split()[2]
+
 def get_uncrustify_version() -> str:
     """
     Get the version string from Uncrustify
diff --git a/scripts/config.py b/scripts/config.py
index bb4a22c..ef13062 100755
--- a/scripts/config.py
+++ b/scripts/config.py
@@ -110,6 +110,8 @@
     'MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN', # build dependency (clang+memsan)
     'MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND', # build dependency (valgrind headers)
     'MBEDTLS_X509_REMOVE_INFO', # removes a feature
+    'MBEDTLS_PSA_STATIC_KEY_SLOTS', # only relevant for embedded devices
+    'MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE', # only relevant for embedded devices
 ])
 
 def is_seamless_alt(name):
diff --git a/scripts/data_files/driver_jsons/driver_opaque_schema.json b/scripts/data_files/driver_jsons/driver_opaque_schema.json
index 933eb07..b05da00 100644
--- a/scripts/data_files/driver_jsons/driver_opaque_schema.json
+++ b/scripts/data_files/driver_jsons/driver_opaque_schema.json
@@ -11,7 +11,7 @@
     },
     "type": {
       "type": "string",
-      "const": ["opaque"]
+      "const": "opaque"
     },
     "location": {
       "type": ["integer","string"],
diff --git a/scripts/data_files/driver_jsons/driver_transparent_schema.json b/scripts/data_files/driver_jsons/driver_transparent_schema.json
index f5d91eb..1791163 100644
--- a/scripts/data_files/driver_jsons/driver_transparent_schema.json
+++ b/scripts/data_files/driver_jsons/driver_transparent_schema.json
@@ -11,7 +11,7 @@
     },
     "type": {
       "type": "string",
-      "const": ["transparent"]
+      "const": "transparent"
     },
     "mbedtls/h_condition": {
       "type": "string"
diff --git a/scripts/generate_ssl_debug_helpers.py b/scripts/generate_ssl_debug_helpers.py
deleted file mode 100755
index 600d160..0000000
--- a/scripts/generate_ssl_debug_helpers.py
+++ /dev/null
@@ -1,416 +0,0 @@
-#!/usr/bin/env python3
-
-"""Generate library/ssl_debug_helpers_generated.c
-
-The code generated by this module includes debug helper functions that can not be
-implemented by fixed codes.
-
-"""
-
-# Copyright The Mbed TLS Contributors
-# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
-import sys
-import re
-import os
-import textwrap
-import argparse
-
-import framework_scripts_path # pylint: disable=unused-import
-from mbedtls_framework import build_tree
-
-
-def remove_c_comments(string):
-    """
-        Remove C style comments from input string
-    """
-    string_pattern = r"(?P<string>\".*?\"|\'.*?\')"
-    comment_pattern = r"(?P<comment>/\*.*?\*/|//[^\r\n]*$)"
-    pattern = re.compile(string_pattern + r'|' + comment_pattern,
-                         re.MULTILINE | re.DOTALL)
-
-    def replacer(match):
-        if match.lastgroup == 'comment':
-            return ""
-        return match.group()
-    return pattern.sub(replacer, string)
-
-
-class CondDirectiveNotMatch(Exception):
-    pass
-
-
-def preprocess_c_source_code(source, *classes):
-    """
-        Simple preprocessor for C source code.
-
-        Only processes condition directives without expanding them.
-        Yield object according to the classes input. Most match firstly
-
-        If the directive pair does not match , raise CondDirectiveNotMatch.
-
-        Assume source code does not include comments and compile pass.
-
-    """
-
-    pattern = re.compile(r"^[ \t]*#[ \t]*" +
-                         r"(?P<directive>(if[ \t]|ifndef[ \t]|ifdef[ \t]|else|endif))" +
-                         r"[ \t]*(?P<param>(.*\\\n)*.*$)",
-                         re.MULTILINE)
-    stack = []
-
-    def _yield_objects(s, d, p, st, end):
-        """
-            Output matched source piece
-        """
-        nonlocal stack
-        start_line, end_line = '', ''
-        if stack:
-            start_line = '#{} {}'.format(d, p)
-            if d == 'if':
-                end_line = '#endif /* {} */'.format(p)
-            elif d == 'ifdef':
-                end_line = '#endif /* defined({}) */'.format(p)
-            else:
-                end_line = '#endif /* !defined({}) */'.format(p)
-        has_instance = False
-        for cls in classes:
-            for instance in cls.extract(s, st, end):
-                if has_instance is False:
-                    has_instance = True
-                    yield pair_start, start_line
-                yield instance.span()[0], instance
-        if has_instance:
-            yield start, end_line
-
-    for match in pattern.finditer(source):
-
-        directive = match.groupdict()['directive'].strip()
-        param = match.groupdict()['param']
-        start, end = match.span()
-
-        if directive in ('if', 'ifndef', 'ifdef'):
-            stack.append((directive, param, start, end))
-            continue
-
-        if not stack:
-            raise CondDirectiveNotMatch()
-
-        pair_directive, pair_param, pair_start, pair_end = stack.pop()
-        yield from _yield_objects(source,
-                                  pair_directive,
-                                  pair_param,
-                                  pair_end,
-                                  start)
-
-        if directive == 'endif':
-            continue
-
-        if pair_directive == 'if':
-            directive = 'if'
-            param = "!( {} )".format(pair_param)
-        elif pair_directive == 'ifdef':
-            directive = 'ifndef'
-            param = pair_param
-        else:
-            directive = 'ifdef'
-            param = pair_param
-
-        stack.append((directive, param, start, end))
-    assert not stack, len(stack)
-
-
-class EnumDefinition:
-    """
-        Generate helper functions around enumeration.
-
-        Currently, it generate translation function from enum value to string.
-        Enum definition looks like:
-        [typedef] enum [prefix name] { [body] } [suffix name];
-
-        Known limitation:
-        - the '}' and ';' SHOULD NOT exist in different macro blocks. Like
-        ```
-        enum test {
-            ....
-        #if defined(A)
-            ....
-        };
-        #else
-            ....
-        };
-        #endif
-        ```
-    """
-
-    @classmethod
-    def extract(cls, source_code, start=0, end=-1):
-        enum_pattern = re.compile(r'enum\s*(?P<prefix_name>\w*)\s*' +
-                                  r'{\s*(?P<body>[^}]*)}' +
-                                  r'\s*(?P<suffix_name>\w*)\s*;',
-                                  re.MULTILINE | re.DOTALL)
-
-        for match in enum_pattern.finditer(source_code, start, end):
-            yield EnumDefinition(source_code,
-                                 span=match.span(),
-                                 group=match.groupdict())
-
-    def __init__(self, source_code, span=None, group=None):
-        assert isinstance(group, dict)
-        prefix_name = group.get('prefix_name', None)
-        suffix_name = group.get('suffix_name', None)
-        body = group.get('body', None)
-        assert prefix_name or suffix_name
-        assert body
-        assert span
-        # If suffix_name exists, it is a typedef
-        self._prototype = suffix_name if suffix_name else 'enum ' + prefix_name
-        self._name = suffix_name if suffix_name else prefix_name
-        self._body = body
-        self._source = source_code
-        self._span = span
-
-    def __repr__(self):
-        return 'Enum({},{})'.format(self._name, self._span)
-
-    def __str__(self):
-        return repr(self)
-
-    def span(self):
-        return self._span
-
-    def generate_translation_function(self):
-        """
-            Generate function for translating value to string
-        """
-        translation_table = []
-
-        for line in self._body.splitlines():
-
-            if line.strip().startswith('#'):
-                # Preprocess directive, keep it in table
-                translation_table.append(line.strip())
-                continue
-
-            if not line.strip():
-                continue
-
-            for field in line.strip().split(','):
-                if not field.strip():
-                    continue
-                member = field.strip().split()[0]
-                translation_table.append(
-                    '{space}case {member}:\n{space}    return "{member}";'
-                    .format(member=member, space=' '*8)
-                )
-
-        body = textwrap.dedent('''\
-            const char *{name}_str( {prototype} in )
-            {{
-                switch (in) {{
-            {translation_table}
-                    default:
-                        return "UNKNOWN_VALUE";
-                }}
-            }}
-                    ''')
-        body = body.format(translation_table='\n'.join(translation_table),
-                           name=self._name,
-                           prototype=self._prototype)
-        return body
-
-
-class SignatureAlgorithmDefinition:
-    """
-        Generate helper functions for signature algorithms.
-
-        It generates translation function from signature algorithm define to string.
-        Signature algorithm definition looks like:
-        #define MBEDTLS_TLS1_3_SIG_[ upper case signature algorithm ] [ value(hex) ]
-
-        Known limitation:
-        - the definitions SHOULD  exist in same macro blocks.
-    """
-
-    @classmethod
-    def extract(cls, source_code, start=0, end=-1):
-        sig_alg_pattern = re.compile(r'#define\s+(?P<name>MBEDTLS_TLS1_3_SIG_\w+)\s+' +
-                                     r'(?P<value>0[xX][0-9a-fA-F]+)$',
-                                     re.MULTILINE | re.DOTALL)
-        matches = list(sig_alg_pattern.finditer(source_code, start, end))
-        if matches:
-            yield SignatureAlgorithmDefinition(source_code, definitions=matches)
-
-    def __init__(self, source_code, definitions=None):
-        if definitions is None:
-            definitions = []
-        assert isinstance(definitions, list) and definitions
-        self._definitions = definitions
-        self._source = source_code
-
-    def __repr__(self):
-        return 'SigAlgs({})'.format(self._definitions[0].span())
-
-    def span(self):
-        return self._definitions[0].span()
-
-    def __str__(self):
-        """
-            Generate function for translating value to string
-        """
-        translation_table = []
-        for m in self._definitions:
-            name = m.groupdict()['name']
-            return_val = name[len('MBEDTLS_TLS1_3_SIG_'):].lower()
-            translation_table.append(
-                '    case {}:\n        return "{}";'.format(name, return_val))
-
-        body = textwrap.dedent('''\
-            const char *mbedtls_ssl_sig_alg_to_str( uint16_t in )
-            {{
-                switch( in )
-                {{
-            {translation_table}
-                }};
-
-                return "UNKNOWN";
-            }}''')
-        body = body.format(translation_table='\n'.join(translation_table))
-        return body
-
-
-class NamedGroupDefinition:
-    """
-        Generate helper functions for named group
-
-        It generates translation function from named group define to string.
-        Named group definition looks like:
-        #define MBEDTLS_SSL_IANA_TLS_GROUP_[ upper case named group ] [ value(hex) ]
-
-        Known limitation:
-        - the definitions SHOULD exist in same macro blocks.
-    """
-
-    @classmethod
-    def extract(cls, source_code, start=0, end=-1):
-        named_group_pattern = re.compile(r'#define\s+(?P<name>MBEDTLS_SSL_IANA_TLS_GROUP_\w+)\s+' +
-                                         r'(?P<value>0[xX][0-9a-fA-F]+)$',
-                                         re.MULTILINE | re.DOTALL)
-        matches = list(named_group_pattern.finditer(source_code, start, end))
-        if matches:
-            yield NamedGroupDefinition(source_code, definitions=matches)
-
-    def __init__(self, source_code, definitions=None):
-        if definitions is None:
-            definitions = []
-        assert isinstance(definitions, list) and definitions
-        self._definitions = definitions
-        self._source = source_code
-
-    def __repr__(self):
-        return 'NamedGroup({})'.format(self._definitions[0].span())
-
-    def span(self):
-        return self._definitions[0].span()
-
-    def __str__(self):
-        """
-            Generate function for translating value to string
-        """
-        translation_table = []
-        for m in self._definitions:
-            name = m.groupdict()['name']
-            iana_name = name[len('MBEDTLS_SSL_IANA_TLS_GROUP_'):].lower()
-            translation_table.append('    case {}:\n        return "{}";'.format(name, iana_name))
-
-        body = textwrap.dedent('''\
-            const char *mbedtls_ssl_named_group_to_str( uint16_t in )
-            {{
-                switch( in )
-                {{
-            {translation_table}
-                }};
-
-                return "UNKNOWN";
-            }}''')
-        body = body.format(translation_table='\n'.join(translation_table))
-        return body
-
-
-OUTPUT_C_TEMPLATE = '''\
-/* Automatically generated by generate_ssl_debug_helpers.py. DO NOT EDIT. */
-
-/**
- * \\file ssl_debug_helpers_generated.c
- *
- * \\brief Automatically generated helper functions for debugging
- */
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
- *
- */
-
-#include "common.h"
-
-#if defined(MBEDTLS_DEBUG_C)
-
-#include "ssl_debug_helpers.h"
-
-{functions}
-
-#endif /* MBEDTLS_DEBUG_C */
-/* End of automatically generated file. */
-
-'''
-
-
-def generate_ssl_debug_helpers(output_directory, mbedtls_root):
-    """
-        Generate functions of debug helps
-    """
-    mbedtls_root = os.path.abspath(
-        mbedtls_root or build_tree.guess_mbedtls_root())
-    with open(os.path.join(mbedtls_root, 'include/mbedtls/ssl.h')) as f:
-        source_code = remove_c_comments(f.read())
-
-    definitions = dict()
-    for start, instance in preprocess_c_source_code(source_code,
-                                                    EnumDefinition,
-                                                    SignatureAlgorithmDefinition,
-                                                    NamedGroupDefinition):
-        if start in definitions:
-            continue
-        if isinstance(instance, EnumDefinition):
-            definition = instance.generate_translation_function()
-        else:
-            definition = instance
-        definitions[start] = definition
-
-    function_definitions = [str(v) for _, v in sorted(definitions.items())]
-    if output_directory == sys.stdout:
-        sys.stdout.write(OUTPUT_C_TEMPLATE.format(
-            functions='\n'.join(function_definitions)))
-    else:
-        with open(os.path.join(output_directory, 'ssl_debug_helpers_generated.c'), 'w') as f:
-            f.write(OUTPUT_C_TEMPLATE.format(
-                functions='\n'.join(function_definitions)))
-
-
-def main():
-    """
-    Command line entry
-    """
-    parser = argparse.ArgumentParser()
-    parser.add_argument('--mbedtls-root', nargs='?', default=None,
-                        help='root directory of mbedtls source code')
-    parser.add_argument('output_directory', nargs='?',
-                        default='library', help='source/header files location')
-
-    args = parser.parse_args()
-
-    generate_ssl_debug_helpers(args.output_directory, args.mbedtls_root)
-    return 0
-
-
-if __name__ == '__main__':
-    sys.exit(main())
diff --git a/scripts/make_generated_files.bat b/scripts/make_generated_files.bat
index 19d5832..cac84b5 100644
--- a/scripts/make_generated_files.bat
+++ b/scripts/make_generated_files.bat
@@ -13,7 +13,7 @@
 perl scripts\generate_errors.pl || exit /b 1
 perl scripts\generate_query_config.pl || exit /b 1
 perl scripts\generate_features.pl || exit /b 1
-python scripts\generate_ssl_debug_helpers.py || exit /b 1
+python framework\scripts\generate_ssl_debug_helpers.py || exit /b 1
 
 @rem @@@@ Build @@@@
 perl scripts\generate_visualc_files.pl || exit /b 1
@@ -28,4 +28,4 @@
 python framework\scripts\generate_psa_tests.py || exit /b 1
 python framework\scripts\generate_test_keys.py --output tests\src\test_keys.h || exit /b 1
 python framework\scripts\generate_test_cert_macros.py --output tests\src\test_certs.h || exit /b 1
-python tests\scripts\generate_tls13_compat_tests.py || exit /b 1
+python framework\scripts\generate_tls13_compat_tests.py || exit /b 1
diff --git a/tests/CMakeLists.txt b/tests/CMakeLists.txt
index 0f68e40..1eb5e3b 100644
--- a/tests/CMakeLists.txt
+++ b/tests/CMakeLists.txt
@@ -170,9 +170,9 @@
             ${CMAKE_CURRENT_SOURCE_DIR}/..
         COMMAND
             "${MBEDTLS_PYTHON_EXECUTABLE}"
-            "${CMAKE_CURRENT_SOURCE_DIR}/scripts/generate_tls13_compat_tests.py"
+            "${CMAKE_CURRENT_SOURCE_DIR}/../framework/scripts/generate_tls13_compat_tests.py"
         DEPENDS
-            ${CMAKE_CURRENT_SOURCE_DIR}/scripts/generate_tls13_compat_tests.py
+            ${CMAKE_CURRENT_SOURCE_DIR}/../framework/scripts/generate_tls13_compat_tests.py
     )
     add_custom_target(tls13-compat.sh
         DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/opt-testcases/tls13-compat.sh)
diff --git a/tests/Makefile b/tests/Makefile
index 1fa3e9a..a1f9b90 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -58,9 +58,9 @@
 # Generated files needed to (fully) run ssl-opt.sh
 .PHONY: ssl-opt
 
-opt-testcases/tls13-compat.sh: scripts/generate_tls13_compat_tests.py
+opt-testcases/tls13-compat.sh: ../framework/scripts/generate_tls13_compat_tests.py
 	echo "  Gen   $@"
-	$(PYTHON) scripts/generate_tls13_compat_tests.py -o $@
+	$(PYTHON) ../framework/scripts/generate_tls13_compat_tests.py -o $@
 GENERATED_FILES += opt-testcases/tls13-compat.sh
 ssl-opt: opt-testcases/tls13-compat.sh
 
diff --git a/tests/compat.sh b/tests/compat.sh
index 52f75e0..22da5ee 100755
--- a/tests/compat.sh
+++ b/tests/compat.sh
@@ -290,7 +290,7 @@
 # list of entries of the form "STANDARD_NAME=PROGRAM_NAME".
 translate_ciphers()
 {
-    ciphers=$(scripts/translate_ciphers.py "$@")
+    ciphers=$(../framework/scripts/translate_ciphers.py "$@")
     if [ $? -ne 0 ]; then
         echo "translate_ciphers.py failed with exit code $1" >&2
         echo "$2" >&2
diff --git a/tests/configs/user-config-for-test.h b/tests/configs/user-config-for-test.h
index 639496b..e187ae2 100644
--- a/tests/configs/user-config-for-test.h
+++ b/tests/configs/user-config-for-test.h
@@ -39,6 +39,7 @@
 /* Use the accelerator driver for all cryptographic mechanisms for which
  * the test driver implemented. */
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_AES
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ARIA
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_CAMELLIA
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_BASIC
diff --git a/tests/include/test/psa_crypto_helpers.h b/tests/include/test/psa_crypto_helpers.h
index 89ab570..82f333c 100644
--- a/tests/include/test/psa_crypto_helpers.h
+++ b/tests/include/test/psa_crypto_helpers.h
@@ -491,4 +491,43 @@
 #define MBEDTLS_TEST_PSA_INTERNAL_KEYS          \
     MBEDTLS_TEST_PSA_INTERNAL_KEYS_FOR_DRBG
 
+/* A couple of helper macros to verify if MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE is
+ * large enough to contain an RSA key pair of the given size. This is meant to be
+ * used in test cases where MBEDTLS_PSA_STATIC_KEY_SLOTS is enabled. */
+#if defined(MBEDTLS_PSA_CRYPTO_C)
+
+#if (MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE >= PSA_KEY_EXPORT_RSA_KEY_PAIR_MAX_SIZE(4096))
+#define MBEDTLS_TEST_STATIC_KEY_SLOTS_SUPPORT_RSA_4096
+#endif
+
+#if (MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE >= PSA_KEY_EXPORT_RSA_KEY_PAIR_MAX_SIZE(2048))
+#define MBEDTLS_TEST_STATIC_KEY_SLOTS_SUPPORT_RSA_2048
+#endif
+
+#endif /* MBEDTLS_PSA_CRYPTO_C */
+
+/* Helper macro to get the size of the each key slot buffer. */
+#if defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+#define MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE     MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE
+#else
+#define MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE     SIZE_MAX
+#endif
+
+/* Helper macro for the PK module to check whether MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE
+ * is large enough to contain 4096-bit RSA key pairs. Of course this check is only
+ * necessary if PK relies on PSA (i.e. MBEDTLS_USE_PSA_CRYPTO) to store and manage
+ * the key. */
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+
+#if !defined(MBEDTLS_PSA_STATIC_KEY_SLOTS) || \
+    defined(MBEDTLS_TEST_STATIC_KEY_SLOTS_SUPPORT_RSA_4096)
+#define MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
+#endif
+
+#else /* MBEDTLS_USE_PSA_CRYPTO */
+
+#define MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
+
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
+
 #endif /* PSA_CRYPTO_HELPERS_H */
diff --git a/tests/opt-testcases/tls13-misc.sh b/tests/opt-testcases/tls13-misc.sh
index 003401c..76cbeec 100644
--- a/tests/opt-testcases/tls13-misc.sh
+++ b/tests/opt-testcases/tls13-misc.sh
@@ -948,6 +948,7 @@
 # ephemeral then ticket based scenario we use for early data testing the first
 # handshake fails. The following skipped test is here to illustrate the kind
 # of testing we would like to do.
+# https://github.com/Mbed-TLS/mbedtls/issues/9582
 skip_next_test
 requires_openssl_tls1_3_with_compatible_ephemeral
 requires_config_enabled MBEDTLS_SSL_CLI_C
diff --git a/tests/scripts/all-core.sh b/tests/scripts/all-core.sh
new file mode 100644
index 0000000..3b5a053
--- /dev/null
+++ b/tests/scripts/all-core.sh
@@ -0,0 +1,1033 @@
+# all-core.sh
+#
+# Copyright The Mbed TLS Contributors
+# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+
+################################################################
+#### Documentation
+################################################################
+
+# Purpose
+# -------
+#
+# To run all tests possible or available on the platform.
+#
+# Files structure
+# ---------------
+#
+# The executable entry point for users and the CI is tests/scripts/all.sh.
+#
+# The actual content is in the following files:
+# - all-core.sh contains the core logic for running test components,
+#   processing command line options, reporting results, etc.
+# - all-helpers.sh contains helper functions used by more than 1 component.
+# - components-*.sh contain the definitions of the various components.
+#
+# The first two parts are shared between repos and branches;
+# the component files are repo&branch-specific.
+#
+# The files all-*.sh and components-*.sh should only define functions and not
+# run code when sourced; the only exception being that all-core.sh runs
+# 'shopt' because that is necessary for the rest of the file to parse.
+#
+# Notes for users
+# ---------------
+#
+# Warning: the test is destructive. It includes various build modes and
+# configurations, and can and will arbitrarily change the current CMake
+# configuration. The following files must be committed into git:
+#    * include/mbedtls/mbedtls_config.h
+#    * Makefile, library/Makefile, programs/Makefile, tests/Makefile,
+#      programs/fuzz/Makefile
+# After running this script, the CMake cache will be lost and CMake
+# will no longer be initialised.
+#
+# The script assumes the presence of a number of tools:
+#   * Basic Unix tools (Windows users note: a Unix-style find must be before
+#     the Windows find in the PATH)
+#   * Perl
+#   * GNU Make
+#   * CMake
+#   * GCC and Clang (recent enough for using ASan with gcc and MemSan with clang, or valgrind)
+#   * G++
+#   * arm-gcc and mingw-gcc
+#   * ArmCC 5 and ArmCC 6, unless invoked with --no-armcc
+#   * OpenSSL and GnuTLS command line tools, in suitable versions for the
+#     interoperability tests. The following are the official versions at the
+#     time of writing:
+#     * GNUTLS_{CLI,SERV} = 3.4.10
+#     * GNUTLS_NEXT_{CLI,SERV} = 3.7.2
+#     * OPENSSL = 1.0.2g (without Debian/Ubuntu patches)
+#     * OPENSSL_NEXT = 3.1.2
+# See the invocation of check_tools below for details.
+#
+# This script must be invoked from the toplevel directory of a git
+# working copy of Mbed TLS.
+#
+# The behavior on an error depends on whether --keep-going (alias -k)
+# is in effect.
+#  * Without --keep-going: the script stops on the first error without
+#    cleaning up. This lets you work in the configuration of the failing
+#    component.
+#  * With --keep-going: the script runs all requested components and
+#    reports failures at the end. In particular the script always cleans
+#    up on exit.
+#
+# Note that the output is not saved. You may want to run
+#   script -c tests/scripts/all.sh
+# or
+#   tests/scripts/all.sh >all.log 2>&1
+#
+# Notes for maintainers
+# ---------------------
+#
+# The bulk of the code is organized into functions that follow one of the
+# following naming conventions:
+# * in all-core.sh:
+#   * pre_XXX: things to do before running the tests, in order.
+#   * post_XXX: things to do after running the tests.
+# * in components-*.sh:
+#   * component_XXX: independent components. They can be run in any order.
+#     * component_check_XXX: quick tests that aren't worth parallelizing.
+#     * component_build_XXX: build things but don't run them.
+#     * component_test_XXX: build and test.
+#     * component_release_XXX: tests that the CI should skip during PR testing.
+#   * support_XXX: if support_XXX exists and returns false then
+#     component_XXX is not run by default.
+# * in various files:
+#   * other: miscellaneous support functions.
+#
+# Each component must start by invoking `msg` with a short informative message.
+#
+# Warning: due to the way bash detects errors, the failure of a command
+# inside 'if' or '!' is not detected. Use the 'not' function instead of '!'.
+#
+# Each component is executed in a separate shell process. The component
+# fails if any command in it returns a non-zero status.
+#
+# The framework performs some cleanup tasks after each component. This
+# means that components can assume that the working directory is in a
+# cleaned-up state, and don't need to perform the cleanup themselves.
+# * Run `make clean`.
+# * Restore `include/mbedtls/mbedtls_config.h` from a backup made before running
+#   the component.
+# * Check out `Makefile`, `library/Makefile`, `programs/Makefile`,
+#   `tests/Makefile` and `programs/fuzz/Makefile` from git.
+#   This cleans up after an in-tree use of CMake.
+
+
+################################################################
+#### Initialization and command line parsing
+################################################################
+
+# Enable ksh/bash extended file matching patterns.
+# Must come before function definitions or some of them wouldn't parse.
+shopt -s extglob
+
+pre_set_shell_options () {
+    # Abort on errors (even on the left-hand side of a pipe).
+    # Treat uninitialised variables as errors.
+    set -e -o pipefail -u
+}
+
+# For project detection
+in_mbedtls_repo () {
+    test "$PROJECT_NAME" = "Mbed TLS"
+}
+
+in_tf_psa_crypto_repo () {
+    test "$PROJECT_NAME" = "TF-PSA-Crypto"
+}
+
+pre_check_environment () {
+    # For project detection
+    PROJECT_NAME_FILE='./scripts/project_name.txt'
+    if read -r PROJECT_NAME < "$PROJECT_NAME_FILE"; then :; else
+        echo "$PROJECT_NAME_FILE does not exist... Exiting..." >&2
+        exit 1
+    fi
+
+    if in_mbedtls_repo || in_tf_psa_crypto_repo; then :; else
+        echo "Must be run from Mbed TLS / TF-PSA-Crypto root" >&2
+        exit 1
+    fi
+}
+
+# Must be called before pre_initialize_variables which sets ALL_COMPONENTS.
+pre_load_components () {
+    # Include the components from components.sh
+    test_script_dir="${0%/*}"
+    for file in "$test_script_dir"/components-*.sh; do
+        source $file
+    done
+}
+
+pre_initialize_variables () {
+    if in_mbedtls_repo; then
+        CONFIG_H='include/mbedtls/mbedtls_config.h'
+        if [ -d tf-psa-crypto ]; then
+            CRYPTO_CONFIG_H='tf-psa-crypto/include/psa/crypto_config.h'
+            PSA_CORE_PATH='tf-psa-crypto/core'
+            BUILTIN_SRC_PATH='tf-psa-crypto/drivers/builtin/src'
+        else
+            CRYPTO_CONFIG_H='include/psa/crypto_config.h'
+            # helper_armc6_build_test() relies on these being defined,
+            # but empty if the paths don't exist (as in 3.6).
+            PSA_CORE_PATH=''
+            BUILTIN_SRC_PATH=''
+        fi
+    else
+        CONFIG_H='drivers/builtin/include/mbedtls/mbedtls_config.h'
+        CRYPTO_CONFIG_H='include/psa/crypto_config.h'
+        PSA_CORE_PATH='core'
+        BUILTIN_SRC_PATH='drivers/builtin/src'
+    fi
+    CONFIG_TEST_DRIVER_H='tests/include/test/drivers/config_test_driver.h'
+
+    # Files that are clobbered by some jobs will be backed up. Use a different
+    # suffix from auxiliary scripts so that all.sh and auxiliary scripts can
+    # independently decide when to remove the backup file.
+    backup_suffix='.all.bak'
+    # Files clobbered by config.py
+    files_to_back_up="$CONFIG_H $CRYPTO_CONFIG_H $CONFIG_TEST_DRIVER_H"
+    if in_mbedtls_repo; then
+        # Files clobbered by in-tree cmake
+        files_to_back_up="$files_to_back_up Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile"
+    fi
+
+    append_outcome=0
+    MEMORY=0
+    FORCE=0
+    QUIET=0
+    KEEP_GOING=0
+
+    # Seed value used with the --release-test option.
+    #
+    # See also RELEASE_SEED in basic-build-test.sh. Debugging is easier if
+    # both values are kept in sync. If you change the value here because it
+    # breaks some tests, you'll definitely want to change it in
+    # basic-build-test.sh as well.
+    RELEASE_SEED=1
+
+    # Specify character collation for regular expressions and sorting with C locale
+    export LC_COLLATE=C
+
+    : ${MBEDTLS_TEST_OUTCOME_FILE=}
+    : ${MBEDTLS_TEST_PLATFORM="$(uname -s | tr -c \\n0-9A-Za-z _)-$(uname -m | tr -c \\n0-9A-Za-z _)"}
+    export MBEDTLS_TEST_OUTCOME_FILE
+    export MBEDTLS_TEST_PLATFORM
+
+    # Default commands, can be overridden by the environment
+    : ${OPENSSL:="openssl"}
+    : ${OPENSSL_NEXT:="$OPENSSL"}
+    : ${GNUTLS_CLI:="gnutls-cli"}
+    : ${GNUTLS_SERV:="gnutls-serv"}
+    : ${OUT_OF_SOURCE_DIR:=./mbedtls_out_of_source_build}
+    : ${ARMC5_BIN_DIR:=/usr/bin}
+    : ${ARMC6_BIN_DIR:=/usr/bin}
+    : ${ARM_NONE_EABI_GCC_PREFIX:=arm-none-eabi-}
+    : ${ARM_LINUX_GNUEABI_GCC_PREFIX:=arm-linux-gnueabi-}
+    : ${ARM_LINUX_GNUEABIHF_GCC_PREFIX:=arm-linux-gnueabihf-}
+    : ${AARCH64_LINUX_GNU_GCC_PREFIX:=aarch64-linux-gnu-}
+    : ${CLANG_LATEST:="clang-latest"}
+    : ${CLANG_EARLIEST:="clang-earliest"}
+    : ${GCC_LATEST:="gcc-latest"}
+    : ${GCC_EARLIEST:="gcc-earliest"}
+    # if MAKEFLAGS is not set add the -j option to speed up invocations of make
+    if [ -z "${MAKEFLAGS+set}" ]; then
+        export MAKEFLAGS="-j$(all_sh_nproc)"
+    fi
+    # if CC is not set, use clang by default (if present) to improve build times
+    if [ -z "${CC+set}" ] && (type clang > /dev/null 2>&1); then
+        export CC="clang"
+    fi
+
+    if [ -n "${OPENSSL_3+set}" ]; then
+        export OPENSSL_NEXT="$OPENSSL_3"
+    fi
+
+    # Include more verbose output for failing tests run by CMake or make
+    export CTEST_OUTPUT_ON_FAILURE=1
+
+    # CFLAGS and LDFLAGS for Asan builds that don't use CMake
+    # default to -O2, use -Ox _after_ this if you want another level
+    ASAN_CFLAGS='-O2 -Werror -fsanitize=address,undefined -fno-sanitize-recover=all'
+    # Normally, tests should use this compiler for ASAN testing
+    ASAN_CC=clang
+
+    # Platform tests have an allocation that returns null
+    export ASAN_OPTIONS="allocator_may_return_null=1"
+    export MSAN_OPTIONS="allocator_may_return_null=1"
+
+    # Gather the list of available components. These are the functions
+    # defined in this script whose name starts with "component_".
+    ALL_COMPONENTS=$(compgen -A function component_ | sed 's/component_//')
+
+    PSASIM_PATH='tests/psa-client-server/psasim/'
+
+    # Delay determining SUPPORTED_COMPONENTS until the command line options have a chance to override
+    # the commands set by the environment
+}
+
+setup_quiet_wrappers()
+{
+    # Pick up "quiet" wrappers for make and cmake, which don't output very much
+    # unless there is an error. This reduces logging overhead in the CI.
+    #
+    # Note that the cmake wrapper breaks unless we use an absolute path here.
+    if [[ -e ${PWD}/tests/scripts/quiet ]]; then
+        export PATH=${PWD}/tests/scripts/quiet:$PATH
+    fi
+}
+
+# Test whether the component $1 is included in the command line patterns.
+is_component_included()
+{
+    # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS
+    # only does word splitting.
+    set -f
+    for pattern in $COMMAND_LINE_COMPONENTS; do
+        set +f
+        case ${1#component_} in $pattern) return 0;; esac
+    done
+    set +f
+    return 1
+}
+
+usage()
+{
+    cat <<EOF
+Usage: $0 [OPTION]... [COMPONENT]...
+Run mbedtls release validation tests.
+By default, run all tests. With one or more COMPONENT, run only those.
+COMPONENT can be the name of a component or a shell wildcard pattern.
+
+Examples:
+  $0 "check_*"
+    Run all sanity checks.
+  $0 --no-armcc --except test_memsan
+    Run everything except builds that require armcc and MemSan.
+
+Special options:
+  -h|--help             Print this help and exit.
+  --list-all-components List all available test components and exit.
+  --list-components     List components supported on this platform and exit.
+
+General options:
+  -q|--quiet            Only output component names, and errors if any.
+  -f|--force            Force the tests to overwrite any modified files.
+  -k|--keep-going       Run all tests and report errors at the end.
+  -m|--memory           Additional optional memory tests.
+     --append-outcome   Append to the outcome file (if used).
+     --arm-none-eabi-gcc-prefix=<string>
+                        Prefix for a cross-compiler for arm-none-eabi
+                        (default: "${ARM_NONE_EABI_GCC_PREFIX}")
+     --arm-linux-gnueabi-gcc-prefix=<string>
+                        Prefix for a cross-compiler for arm-linux-gnueabi
+                        (default: "${ARM_LINUX_GNUEABI_GCC_PREFIX}")
+     --arm-linux-gnueabihf-gcc-prefix=<string>
+                        Prefix for a cross-compiler for arm-linux-gnueabihf
+                        (default: "${ARM_LINUX_GNUEABIHF_GCC_PREFIX}")
+     --aarch64-linux-gnu-gcc-prefix=<string>
+                        Prefix for a cross-compiler for aarch64-linux-gnu
+                        (default: "${AARCH64_LINUX_GNU_GCC_PREFIX}")
+     --armcc            Run ARM Compiler builds (on by default).
+     --restore          First clean up the build tree, restoring backed up
+                        files. Do not run any components unless they are
+                        explicitly specified.
+     --error-test       Error test mode: run a failing function in addition
+                        to any specified component. May be repeated.
+     --except           Exclude the COMPONENTs listed on the command line,
+                        instead of running only those.
+     --no-append-outcome    Write a new outcome file and analyze it (default).
+     --no-armcc         Skip ARM Compiler builds.
+     --no-force         Refuse to overwrite modified files (default).
+     --no-keep-going    Stop at the first error (default).
+     --no-memory        No additional memory tests (default).
+     --no-quiet         Print full output from components.
+     --out-of-source-dir=<path>  Directory used for CMake out-of-source build tests.
+     --outcome-file=<path>  File where test outcomes are written (not done if
+                            empty; default: \$MBEDTLS_TEST_OUTCOME_FILE).
+     --random-seed      Use a random seed value for randomized tests (default).
+  -r|--release-test     Run this script in release mode. This fixes the seed value to ${RELEASE_SEED}.
+  -s|--seed             Integer seed value to use for this test run.
+
+Tool path options:
+     --armc5-bin-dir=<ARMC5_bin_dir_path>       ARM Compiler 5 bin directory.
+     --armc6-bin-dir=<ARMC6_bin_dir_path>       ARM Compiler 6 bin directory.
+     --clang-earliest=<Clang_earliest_path>     Earliest version of clang available
+     --clang-latest=<Clang_latest_path>         Latest version of clang available
+     --gcc-earliest=<GCC_earliest_path>         Earliest version of GCC available
+     --gcc-latest=<GCC_latest_path>             Latest version of GCC available
+     --gnutls-cli=<GnuTLS_cli_path>             GnuTLS client executable to use for most tests.
+     --gnutls-serv=<GnuTLS_serv_path>           GnuTLS server executable to use for most tests.
+     --openssl=<OpenSSL_path>                   OpenSSL executable to use for most tests.
+     --openssl-next=<OpenSSL_path>              OpenSSL executable to use for recent things like ARIA
+EOF
+}
+
+# Cleanup before/after running a component.
+# Remove built files as well as the cmake cache/config.
+# Does not remove generated source files.
+cleanup()
+{
+    if in_mbedtls_repo; then
+        command make clean
+    fi
+
+    # Remove CMake artefacts
+    find . -name .git -prune -o \
+           -iname CMakeFiles -exec rm -rf {} \+ -o \
+           \( -iname cmake_install.cmake -o \
+              -iname CTestTestfile.cmake -o \
+              -iname CMakeCache.txt -o \
+              -path './cmake/*.cmake' \) -exec rm -f {} \+
+    # Remove Makefiles generated by in-tree CMake builds
+    # (Not all files will exist in all branches, but that's OK.)
+    rm -f 3rdparty/Makefile 3rdparty/*/Makefile
+    rm -f pkgconfig/Makefile framework/Makefile
+    rm -f include/Makefile programs/!(fuzz)/Makefile
+    rm -f tf-psa-crypto/Makefile tf-psa-crypto/include/Makefile
+    rm -f tf-psa-crypto/core/Makefile tf-psa-crypto/drivers/Makefile
+    rm -f tf-psa-crypto/tests/Makefile
+    rm -f tf-psa-crypto/drivers/everest/Makefile
+    rm -f tf-psa-crypto/drivers/p256-m/Makefile
+    rm -f tf-psa-crypto/drivers/builtin/Makefile
+    rm -f tf-psa-crypto/drivers/builtin/src/Makefile
+
+    # Remove any artifacts from the component_test_cmake_as_subdirectory test.
+    rm -rf programs/test/cmake_subproject/build
+    rm -f programs/test/cmake_subproject/Makefile
+    rm -f programs/test/cmake_subproject/cmake_subproject
+
+    # Remove any artifacts from the component_test_cmake_as_package test.
+    rm -rf programs/test/cmake_package/build
+    rm -f programs/test/cmake_package/Makefile
+    rm -f programs/test/cmake_package/cmake_package
+
+    # Remove any artifacts from the component_test_cmake_as_installed_package test.
+    rm -rf programs/test/cmake_package_install/build
+    rm -f programs/test/cmake_package_install/Makefile
+    rm -f programs/test/cmake_package_install/cmake_package_install
+
+    # Restore files that may have been clobbered by the job
+    restore_backed_up_files
+}
+
+# Restore files that may have been clobbered
+restore_backed_up_files () {
+    for x in $files_to_back_up; do
+        if [[ -e "$x$backup_suffix" ]]; then
+            cp -p "$x$backup_suffix" "$x"
+        fi
+    done
+}
+
+# Final cleanup when this script exits (except when exiting on a failure
+# in non-keep-going mode).
+final_cleanup () {
+    cleanup
+
+    for x in $files_to_back_up; do
+        rm -f "$x$backup_suffix"
+    done
+}
+
+# Executed on exit. May be redefined depending on command line options.
+final_report () {
+    :
+}
+
+fatal_signal () {
+    final_cleanup
+    final_report $1
+    trap - $1
+    kill -$1 $$
+}
+
+pre_set_signal_handlers () {
+    trap 'fatal_signal HUP' HUP
+    trap 'fatal_signal INT' INT
+    trap 'fatal_signal TERM' TERM
+}
+
+# Number of processors on this machine. Used as the default setting
+# for parallel make.
+all_sh_nproc ()
+{
+    {
+        nproc || # Linux
+        sysctl -n hw.ncpuonline || # NetBSD, OpenBSD
+        sysctl -n hw.ncpu || # FreeBSD
+        echo 1
+    } 2>/dev/null
+}
+
+msg()
+{
+    if [ -n "${current_component:-}" ]; then
+        current_section="${current_component#component_}: $1"
+    else
+        current_section="$1"
+    fi
+
+    if [ $QUIET -eq 1 ]; then
+        return
+    fi
+
+    echo ""
+    echo "******************************************************************"
+    echo "* $current_section "
+    printf "* "; date
+    echo "******************************************************************"
+}
+
+err_msg()
+{
+    echo "$1" >&2
+}
+
+check_tools()
+{
+    for tool in "$@"; do
+        if ! `type "$tool" >/dev/null 2>&1`; then
+            err_msg "$tool not found!"
+            exit 1
+        fi
+    done
+}
+
+pre_parse_command_line () {
+    COMMAND_LINE_COMPONENTS=
+    all_except=0
+    error_test=0
+    list_components=0
+    restore_first=0
+    no_armcc=
+
+    # Note that legacy options are ignored instead of being omitted from this
+    # list of options, so invocations that worked with previous version of
+    # all.sh will still run and work properly.
+    while [ $# -gt 0 ]; do
+        case "$1" in
+            --append-outcome) append_outcome=1;;
+            --arm-none-eabi-gcc-prefix) shift; ARM_NONE_EABI_GCC_PREFIX="$1";;
+            --arm-linux-gnueabi-gcc-prefix) shift; ARM_LINUX_GNUEABI_GCC_PREFIX="$1";;
+            --arm-linux-gnueabihf-gcc-prefix) shift; ARM_LINUX_GNUEABIHF_GCC_PREFIX="$1";;
+            --aarch64-linux-gnu-gcc-prefix) shift; AARCH64_LINUX_GNU_GCC_PREFIX="$1";;
+            --armcc) no_armcc=;;
+            --armc5-bin-dir) shift; ARMC5_BIN_DIR="$1";;
+            --armc6-bin-dir) shift; ARMC6_BIN_DIR="$1";;
+            --clang-earliest) shift; CLANG_EARLIEST="$1";;
+            --clang-latest) shift; CLANG_LATEST="$1";;
+            --error-test) error_test=$((error_test + 1));;
+            --except) all_except=1;;
+            --force|-f) FORCE=1;;
+            --gcc-earliest) shift; GCC_EARLIEST="$1";;
+            --gcc-latest) shift; GCC_LATEST="$1";;
+            --gnutls-cli) shift; GNUTLS_CLI="$1";;
+            --gnutls-legacy-cli) shift;; # ignored for backward compatibility
+            --gnutls-legacy-serv) shift;; # ignored for backward compatibility
+            --gnutls-serv) shift; GNUTLS_SERV="$1";;
+            --help|-h) usage; exit;;
+            --keep-going|-k) KEEP_GOING=1;;
+            --list-all-components) printf '%s\n' $ALL_COMPONENTS; exit;;
+            --list-components) list_components=1;;
+            --memory|-m) MEMORY=1;;
+            --no-append-outcome) append_outcome=0;;
+            --no-armcc) no_armcc=1;;
+            --no-force) FORCE=0;;
+            --no-keep-going) KEEP_GOING=0;;
+            --no-memory) MEMORY=0;;
+            --no-quiet) QUIET=0;;
+            --openssl) shift; OPENSSL="$1";;
+            --openssl-next) shift; OPENSSL_NEXT="$1";;
+            --outcome-file) shift; MBEDTLS_TEST_OUTCOME_FILE="$1";;
+            --out-of-source-dir) shift; OUT_OF_SOURCE_DIR="$1";;
+            --quiet|-q) QUIET=1;;
+            --random-seed) unset SEED;;
+            --release-test|-r) SEED=$RELEASE_SEED;;
+            --restore) restore_first=1;;
+            --seed|-s) shift; SEED="$1";;
+            -*)
+                echo >&2 "Unknown option: $1"
+                echo >&2 "Run $0 --help for usage."
+                exit 120
+                ;;
+            *) COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS $1";;
+        esac
+        shift
+    done
+
+    # Exclude components that are not supported on this platform.
+    SUPPORTED_COMPONENTS=
+    for component in $ALL_COMPONENTS; do
+        case $(type "support_$component" 2>&1) in
+            *' function'*)
+                if ! support_$component; then continue; fi;;
+        esac
+        SUPPORTED_COMPONENTS="$SUPPORTED_COMPONENTS $component"
+    done
+
+    if [ $list_components -eq 1 ]; then
+        printf '%s\n' $SUPPORTED_COMPONENTS
+        exit
+    fi
+
+    # With no list of components, run everything.
+    if [ -z "$COMMAND_LINE_COMPONENTS" ] && [ $restore_first -eq 0 ]; then
+        all_except=1
+    fi
+
+    # --no-armcc is a legacy option. The modern way is --except '*_armcc*'.
+    # Ignore it if components are listed explicitly on the command line.
+    if [ -n "$no_armcc" ] && [ $all_except -eq 1 ]; then
+        COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS *_armcc*"
+    fi
+
+    # Error out if an explicitly requested component doesn't exist.
+    if [ $all_except -eq 0 ]; then
+        unsupported=0
+        # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS
+        # only does word splitting.
+        set -f
+        for component in $COMMAND_LINE_COMPONENTS; do
+            set +f
+            # If the requested name includes a wildcard character, don't
+            # check it. Accept wildcard patterns that don't match anything.
+            case $component in
+                *[*?\[]*) continue;;
+            esac
+            case " $SUPPORTED_COMPONENTS " in
+                *" $component "*) :;;
+                *)
+                    echo >&2 "Component $component was explicitly requested, but is not known or not supported."
+                    unsupported=$((unsupported + 1));;
+            esac
+        done
+        set +f
+        if [ $unsupported -ne 0 ]; then
+            exit 2
+        fi
+    fi
+
+    # Build the list of components to run.
+    RUN_COMPONENTS=
+    for component in $SUPPORTED_COMPONENTS; do
+        if is_component_included "$component"; [ $? -eq $all_except ]; then
+            RUN_COMPONENTS="$RUN_COMPONENTS $component"
+        fi
+    done
+
+    unset all_except
+    unset no_armcc
+}
+
+pre_check_git () {
+    if [ $FORCE -eq 1 ]; then
+        rm -rf "$OUT_OF_SOURCE_DIR"
+        git checkout-index -f -q $CONFIG_H
+        cleanup
+    else
+
+        if [ -d "$OUT_OF_SOURCE_DIR" ]; then
+            echo "Warning - there is an existing directory at '$OUT_OF_SOURCE_DIR'" >&2
+            echo "You can either delete this directory manually, or force the test by rerunning"
+            echo "the script as: $0 --force --out-of-source-dir $OUT_OF_SOURCE_DIR"
+            exit 1
+        fi
+
+        if ! git diff --quiet "$CONFIG_H"; then
+            err_msg "Warning - the configuration file '$CONFIG_H' has been edited. "
+            echo "You can either delete or preserve your work, or force the test by rerunning the"
+            echo "script as: $0 --force"
+            exit 1
+        fi
+    fi
+}
+
+pre_restore_files () {
+    # If the makefiles have been generated by a framework such as cmake,
+    # restore them from git. If the makefiles look like modifications from
+    # the ones checked into git, take care not to modify them. Whatever
+    # this function leaves behind is what the script will restore before
+    # each component.
+    case "$(head -n1 Makefile)" in
+        *[Gg]enerated*)
+            git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
+            git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
+            ;;
+    esac
+}
+
+pre_back_up () {
+    for x in $files_to_back_up; do
+        cp -p "$x" "$x$backup_suffix"
+    done
+}
+
+pre_setup_keep_going () {
+    failure_count=0 # Number of failed components
+    last_failure_status=0 # Last failure status in this component
+
+    # See err_trap
+    previous_failure_status=0
+    previous_failed_command=
+    previous_failure_funcall_depth=0
+    unset report_failed_command
+
+    start_red=
+    end_color=
+    if [ -t 1 ]; then
+        case "${TERM:-}" in
+            *color*|cygwin|linux|rxvt*|screen|[Eex]term*)
+                start_red=$(printf '\033[31m')
+                end_color=$(printf '\033[0m')
+                ;;
+        esac
+    fi
+
+    # Keep a summary of failures in a file. We'll print it out at the end.
+    failure_summary_file=$PWD/all-sh-failures-$$.log
+    : >"$failure_summary_file"
+
+    # Whether it makes sense to keep a component going after the specified
+    # command fails (test command) or not (configure or build).
+    # This function normally receives the failing simple command
+    # ($BASH_COMMAND) as an argument, but if $report_failed_command is set,
+    # this is passed instead.
+    # This doesn't have to be 100% accurate: all failures are recorded anyway.
+    # False positives result in running things that can't be expected to
+    # work. False negatives result in things not running after something else
+    # failed even though they might have given useful feedback.
+    can_keep_going_after_failure () {
+        case "$1" in
+            "msg "*) false;;
+            "cd "*) false;;
+            "diff "*) true;;
+            *make*[\ /]tests*) false;; # make tests, make CFLAGS=-I../tests, ...
+            *test*) true;; # make test, tests/stuff, env V=v tests/stuff, ...
+            *make*check*) true;;
+            "grep "*) true;;
+            "[ "*) true;;
+            "! "*) true;;
+            *) false;;
+        esac
+    }
+
+    # This function runs if there is any error in a component.
+    # It must either exit with a nonzero status, or set
+    # last_failure_status to a nonzero value.
+    err_trap () {
+        # Save $? (status of the failing command). This must be the very
+        # first thing, before $? is overridden.
+        last_failure_status=$?
+        failed_command=${report_failed_command-$BASH_COMMAND}
+
+        if [[ $last_failure_status -eq $previous_failure_status &&
+              "$failed_command" == "$previous_failed_command" &&
+              ${#FUNCNAME[@]} == $((previous_failure_funcall_depth - 1)) ]]
+        then
+            # The same command failed twice in a row, but this time one level
+            # less deep in the function call stack. This happens when the last
+            # command of a function returns a nonzero status, and the function
+            # returns that same status. Ignore the second failure.
+            previous_failure_funcall_depth=${#FUNCNAME[@]}
+            return
+        fi
+        previous_failure_status=$last_failure_status
+        previous_failed_command=$failed_command
+        previous_failure_funcall_depth=${#FUNCNAME[@]}
+
+        text="$current_section: $failed_command -> $last_failure_status"
+        echo "${start_red}^^^^$text^^^^${end_color}" >&2
+        echo "$text" >>"$failure_summary_file"
+
+        # If the command is fatal (configure or build command), stop this
+        # component. Otherwise (test command) keep the component running
+        # (run more tests from the same build).
+        if ! can_keep_going_after_failure "$failed_command"; then
+            exit $last_failure_status
+        fi
+    }
+
+    final_report () {
+        if [ $failure_count -gt 0 ]; then
+            echo
+            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+            echo "${start_red}FAILED: $failure_count components${end_color}"
+            cat "$failure_summary_file"
+            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+        elif [ -z "${1-}" ]; then
+            echo "SUCCESS :)"
+        fi
+        if [ -n "${1-}" ]; then
+            echo "Killed by SIG$1."
+        fi
+        rm -f "$failure_summary_file"
+        if [ $failure_count -gt 0 ]; then
+            exit 1
+        fi
+    }
+}
+
+# '! true' does not trigger the ERR trap. Arrange to trigger it, with
+# a reasonably informative error message (not just "$@").
+not () {
+    if "$@"; then
+        report_failed_command="! $*"
+        false
+        unset report_failed_command
+    fi
+}
+
+pre_prepare_outcome_file () {
+    case "$MBEDTLS_TEST_OUTCOME_FILE" in
+      [!/]*) MBEDTLS_TEST_OUTCOME_FILE="$PWD/$MBEDTLS_TEST_OUTCOME_FILE";;
+    esac
+    if [ -n "$MBEDTLS_TEST_OUTCOME_FILE" ] && [ "$append_outcome" -eq 0 ]; then
+        rm -f "$MBEDTLS_TEST_OUTCOME_FILE"
+    fi
+}
+
+pre_print_configuration () {
+    if [ $QUIET -eq 1 ]; then
+        return
+    fi
+
+    msg "info: $0 configuration"
+    echo "MEMORY: $MEMORY"
+    echo "FORCE: $FORCE"
+    echo "MBEDTLS_TEST_OUTCOME_FILE: ${MBEDTLS_TEST_OUTCOME_FILE:-(none)}"
+    echo "SEED: ${SEED-"UNSET"}"
+    echo
+    echo "OPENSSL: $OPENSSL"
+    echo "OPENSSL_NEXT: $OPENSSL_NEXT"
+    echo "GNUTLS_CLI: $GNUTLS_CLI"
+    echo "GNUTLS_SERV: $GNUTLS_SERV"
+    echo "ARMC5_BIN_DIR: $ARMC5_BIN_DIR"
+    echo "ARMC6_BIN_DIR: $ARMC6_BIN_DIR"
+}
+
+# Make sure the tools we need are available.
+pre_check_tools () {
+    # Build the list of variables to pass to output_env.sh.
+    set env
+
+    case " $RUN_COMPONENTS " in
+        # Require OpenSSL and GnuTLS if running any tests (as opposed to
+        # only doing builds). Not all tests run OpenSSL and GnuTLS, but this
+        # is a good enough approximation in practice.
+        *" test_"* | *" release_test_"*)
+            # To avoid setting OpenSSL and GnuTLS for each call to compat.sh
+            # and ssl-opt.sh, we just export the variables they require.
+            export OPENSSL="$OPENSSL"
+            export GNUTLS_CLI="$GNUTLS_CLI"
+            export GNUTLS_SERV="$GNUTLS_SERV"
+            # Avoid passing --seed flag in every call to ssl-opt.sh
+            if [ -n "${SEED-}" ]; then
+                export SEED
+            fi
+            set "$@" OPENSSL="$OPENSSL"
+            set "$@" GNUTLS_CLI="$GNUTLS_CLI" GNUTLS_SERV="$GNUTLS_SERV"
+            check_tools "$OPENSSL" "$OPENSSL_NEXT" \
+                        "$GNUTLS_CLI" "$GNUTLS_SERV"
+            ;;
+    esac
+
+    case " $RUN_COMPONENTS " in
+        *_doxygen[_\ ]*) check_tools "doxygen" "dot";;
+    esac
+
+    case " $RUN_COMPONENTS " in
+        *_arm_none_eabi_gcc[_\ ]*) check_tools "${ARM_NONE_EABI_GCC_PREFIX}gcc";;
+    esac
+
+    case " $RUN_COMPONENTS " in
+        *_mingw[_\ ]*) check_tools "i686-w64-mingw32-gcc";;
+    esac
+
+    case " $RUN_COMPONENTS " in
+        *" test_zeroize "*) check_tools "gdb";;
+    esac
+
+    case " $RUN_COMPONENTS " in
+        *_armcc*)
+            ARMC5_CC="$ARMC5_BIN_DIR/armcc"
+            ARMC5_AR="$ARMC5_BIN_DIR/armar"
+            ARMC5_FROMELF="$ARMC5_BIN_DIR/fromelf"
+            ARMC6_CC="$ARMC6_BIN_DIR/armclang"
+            ARMC6_AR="$ARMC6_BIN_DIR/armar"
+            ARMC6_FROMELF="$ARMC6_BIN_DIR/fromelf"
+            check_tools "$ARMC5_CC" "$ARMC5_AR" "$ARMC5_FROMELF" \
+                        "$ARMC6_CC" "$ARMC6_AR" "$ARMC6_FROMELF";;
+    esac
+
+    # past this point, no call to check_tool, only printing output
+    if [ $QUIET -eq 1 ]; then
+        return
+    fi
+
+    msg "info: output_env.sh"
+    case $RUN_COMPONENTS in
+        *_armcc*)
+            set "$@" ARMC5_CC="$ARMC5_CC" ARMC6_CC="$ARMC6_CC" RUN_ARMCC=1;;
+        *) set "$@" RUN_ARMCC=0;;
+    esac
+    "$@" scripts/output_env.sh
+}
+
+pre_generate_files() {
+    # since make doesn't have proper dependencies, remove any possibly outdate
+    # file that might be around before generating fresh ones
+    make neat
+    if [ $QUIET -eq 1 ]; then
+        make generated_files >/dev/null
+    else
+        make generated_files
+    fi
+}
+
+pre_load_helpers () {
+    # The path is going to change when this is moved to the framework
+    test_script_dir="${0%/*}"
+    source "$test_script_dir"/all-helpers.sh
+}
+
+################################################################
+#### Termination
+################################################################
+
+post_report () {
+    msg "Done, cleaning up"
+    final_cleanup
+
+    final_report
+}
+
+################################################################
+#### Run all the things
+################################################################
+
+# Function invoked by --error-test to test error reporting.
+pseudo_component_error_test () {
+    msg "Testing error reporting $error_test_i"
+    if [ $KEEP_GOING -ne 0 ]; then
+        echo "Expect three failing commands."
+    fi
+    # If the component doesn't run in a subshell, changing error_test_i to an
+    # invalid integer will cause an error in the loop that runs this function.
+    error_test_i=this_should_not_be_used_since_the_component_runs_in_a_subshell
+    # Expected error: 'grep non_existent /dev/null -> 1'
+    grep non_existent /dev/null
+    # Expected error: '! grep -q . tests/scripts/all.sh -> 1'
+    not grep -q . "$0"
+    # Expected error: 'make unknown_target -> 2'
+    make unknown_target
+    false "this should not be executed"
+}
+
+# Run one component and clean up afterwards.
+run_component () {
+    current_component="$1"
+    export MBEDTLS_TEST_CONFIGURATION="$current_component"
+
+    # Unconditionally create a seedfile that's sufficiently long.
+    # Do this before each component, because a previous component may
+    # have messed it up or shortened it.
+    local dd_cmd
+    dd_cmd=(dd if=/dev/urandom of=./tests/seedfile bs=64 count=1)
+    case $OSTYPE in
+        linux*|freebsd*|openbsd*) dd_cmd+=(status=none)
+    esac
+    "${dd_cmd[@]}"
+
+    if [ -d tf-psa-crypto ]; then
+        dd_cmd=(dd if=/dev/urandom of=./tf-psa-crypto/tests/seedfile bs=64 count=1)
+        case $OSTYPE in
+            linux*|freebsd*|openbsd*) dd_cmd+=(status=none)
+        esac
+        "${dd_cmd[@]}"
+    fi
+
+    # Run the component in a subshell, with error trapping and output
+    # redirection set up based on the relevant options.
+    if [ $KEEP_GOING -eq 1 ]; then
+        # We want to keep running if the subshell fails, so 'set -e' must
+        # be off when the subshell runs.
+        set +e
+    fi
+    (
+        if [ $QUIET -eq 1 ]; then
+            # msg() will be silenced, so just print the component name here.
+            echo "${current_component#component_}"
+            exec >/dev/null
+        fi
+        if [ $KEEP_GOING -eq 1 ]; then
+            # Keep "set -e" off, and run an ERR trap instead to record failures.
+            set -E
+            trap err_trap ERR
+        fi
+        # The next line is what runs the component
+        "$@"
+        if [ $KEEP_GOING -eq 1 ]; then
+            trap - ERR
+            exit $last_failure_status
+        fi
+    )
+    component_status=$?
+    if [ $KEEP_GOING -eq 1 ]; then
+        set -e
+        if [ $component_status -ne 0 ]; then
+            failure_count=$((failure_count + 1))
+        fi
+    fi
+
+    # Restore the build tree to a clean state.
+    cleanup
+    unset current_component
+}
+
+################################################################
+#### Main
+################################################################
+
+main () {
+    # Preliminary setup
+    pre_set_shell_options
+    pre_set_signal_handlers
+    pre_check_environment
+    pre_load_helpers
+    pre_load_components
+    pre_initialize_variables
+    pre_parse_command_line "$@"
+
+    setup_quiet_wrappers
+    pre_check_git
+    pre_restore_files
+    pre_back_up
+
+    build_status=0
+    if [ $KEEP_GOING -eq 1 ]; then
+        pre_setup_keep_going
+    fi
+    pre_prepare_outcome_file
+    pre_print_configuration
+    pre_check_tools
+    cleanup
+    if in_mbedtls_repo; then
+        pre_generate_files
+    fi
+
+    # Run the requested tests.
+    for ((error_test_i=1; error_test_i <= error_test; error_test_i++)); do
+        run_component pseudo_component_error_test
+    done
+    unset error_test_i
+    for component in $RUN_COMPONENTS; do
+        run_component "component_$component"
+    done
+
+    # We're done.
+    post_report
+}
diff --git a/tests/scripts/all-helpers.sh b/tests/scripts/all-helpers.sh
new file mode 100644
index 0000000..cdb3f4e
--- /dev/null
+++ b/tests/scripts/all-helpers.sh
@@ -0,0 +1,327 @@
+# all-helpers.sh
+#
+# Copyright The Mbed TLS Contributors
+# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+
+# This file contains helpers for test components that are executed by all.sh.
+# See "Files structure" in all-core.sh for other files used by all.sh.
+#
+# This file is the right place for helpers:
+# - that are used by more than one component living in more than one file;
+# - or (inclusive) that we want to share accross repos or branches.
+#
+# Helpers that are used in a single component file that is
+# repo&branch-specific can be defined in the file where they are used.
+
+################################################################
+#### Helpers for components using libtestdriver1
+################################################################
+
+# How to use libtestdriver1
+# -------------------------
+#
+# 1. Define the list algorithms and key types to accelerate,
+#    designated the same way as PSA_WANT_ macros but without PSA_WANT_.
+#    Examples:
+#      - loc_accel_list="ALG_JPAKE"
+#      - loc_accel_list="ALG_FFDH KEY_TYPE_DH_KEY_PAIR KEY_TYPE_DH_PUBLIC_KEY"
+# 2. Make configurations changes for the driver and/or main libraries.
+#    2a. Call helper_libtestdriver1_adjust_config <base>, where the argument
+#        can be either "default" to start with the default config, or a name
+#        supported by scripts/config.py (for example, "full"). This selects
+#        the base to use, and makes common adjustments.
+#    2b. If desired, adjust the PSA_WANT symbols in psa/crypto_config.h.
+#        These changes affect both the driver and the main libraries.
+#        (Note: they need to have the same set of PSA_WANT symbols, as that
+#        determines the ABI between them.)
+#    2c. Adjust MBEDTLS_ symbols in mbedtls_config.h. This only affects the
+#        main libraries. Typically, you want to disable the module(s) that are
+#        being accelerated. You may need to also disable modules that depend
+#        on them or options that are not supported with drivers.
+#    2d. On top of psa/crypto_config.h, the driver library uses its own config
+#        file: tests/include/test/drivers/config_test_driver.h. You usually
+#        don't need to edit it: using loc_extra_list (see below) is preferred.
+#        However, when there's no PSA symbol for what you want to enable,
+#        calling scripts/config.py on this file remains the only option.
+# 3. Build the driver library, then the main libraries, test, and programs.
+#    3a. Call helper_libtestdriver1_make_drivers "$loc_accel_list". You may
+#        need to enable more algorithms here, typically hash algorithms when
+#        accelerating some signature algorithms (ECDSA, RSAv2). This is done
+#        by passing a 2nd argument listing the extra algorithms.
+#        Example:
+#          loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512"
+#          helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
+#    3b. Call helper_libtestdriver1_make_main "$loc_accel_list". Any
+#        additional arguments will be passed to make: this can be useful if
+#        you don't want to build everything when iterating during development.
+#        Example:
+#          helper_libtestdriver1_make_main "$loc_accel_list" -C tests test_suite_foo
+# 4. Run the tests you want.
+
+# Adjust the configuration - for both libtestdriver1 and main library,
+# as they should have the same PSA_WANT macros.
+helper_libtestdriver1_adjust_config() {
+    base_config=$1
+    # Select the base configuration
+    if [ "$base_config" != "default" ]; then
+        scripts/config.py "$base_config"
+    fi
+
+    # Enable PSA-based config (necessary to use drivers)
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
+
+    # Dynamic secure element support is a deprecated feature and needs to be disabled here.
+    # This is done to have the same form of psa_key_attributes_s for libdriver and library.
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+
+    # If threading is enabled on the normal build, then we need to enable it in the drivers as well,
+    # otherwise we will end up running multithreaded tests without mutexes to protect them.
+    if scripts/config.py get MBEDTLS_THREADING_C; then
+        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_THREADING_C
+    fi
+
+    if scripts/config.py get MBEDTLS_THREADING_PTHREAD; then
+        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_THREADING_PTHREAD
+    fi
+}
+
+# Build the drivers library libtestdriver1.a (with ASan).
+#
+# Parameters:
+# 1. a space-separated list of things to accelerate;
+# 2. optional: a space-separate list of things to also support.
+# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
+helper_libtestdriver1_make_drivers() {
+    loc_accel_flags=$( echo "$1 ${2-}" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
+    make CC=$ASAN_CC -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# Build the main libraries, programs and tests,
+# linking to the drivers library (with ASan).
+#
+# Parameters:
+# 1. a space-separated list of things to accelerate;
+# *. remaining arguments if any are passed directly to make
+#    (examples: lib, -C tests test_suite_xxx, etc.)
+# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
+helper_libtestdriver1_make_main() {
+    loc_accel_list=$1
+    shift
+
+    # we need flags both with and without the LIBTESTDRIVER1_ prefix
+    loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
+    loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" "$@"
+}
+
+################################################################
+#### Helpers for components using psasim
+################################################################
+
+# Set some default values $CONFIG_H in order to build server or client sides
+# in PSASIM. There is only 1 mandatory parameter:
+# - $1: target which can be "client" or "server"
+helper_psasim_config() {
+    TARGET=$1
+
+    if [ "$TARGET" == "client" ]; then
+        scripts/config.py full
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
+        # Dynamic secure element support is a deprecated feature and it is not
+        # available when CRYPTO_C and PSA_CRYPTO_STORAGE_C are disabled.
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+        # Disable potentially problematic features
+        scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+        scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+    else
+        scripts/config.py crypto_full
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
+        # We need to match the client with MBEDTLS_PSA_CRYPTO_SE_C
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+        # Also ensure MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER not set (to match client)
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+    fi
+}
+
+# This is a helper function to be used in psasim builds. It is meant to clean
+# up the library's workspace after the server build and before the client
+# build. Built libraries (mbedcrypto, mbedx509 and mbedtls) are supposed to be
+# already copied to psasim folder at this point.
+helper_psasim_cleanup_before_client() {
+    # Clean up library files
+    make -C library clean
+
+    # Restore files that were backup before building library files. This
+    # includes $CONFIG_H and $CRYPTO_CONFIG_H.
+    restore_backed_up_files
+}
+
+# Helper to build the libraries for client/server in PSASIM. If the server is
+# being built, then it builds also the final executable.
+# There is only 1 mandatory parameter:
+# - $1: target which can be "client" or "server"
+helper_psasim_build() {
+    TARGET=$1
+    shift
+    TARGET_LIB=${TARGET}_libs
+
+    make -C $PSASIM_PATH CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" $TARGET_LIB "$@"
+
+    # Build also the server application after its libraries have been built.
+    if [ "$TARGET" == "server" ]; then
+        make -C $PSASIM_PATH CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" test/psa_server
+    fi
+}
+
+################################################################
+#### Configuration helpers
+################################################################
+
+# When called with no parameter this function disables all builtin curves.
+# The function optionally accepts 1 parameter: a space-separated list of the
+# curves that should be kept enabled.
+helper_disable_builtin_curves() {
+    allowed_list="${1:-}"
+    scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED"
+
+    for curve in $allowed_list; do
+        scripts/config.py set $curve
+    done
+}
+
+# Helper returning the list of supported elliptic curves from CRYPTO_CONFIG_H,
+# without the "PSA_WANT_" prefix. This becomes handy for accelerating curves
+# in the following helpers.
+helper_get_psa_curve_list () {
+    loc_list=""
+    for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
+        loc_list="$loc_list $item"
+    done
+
+    echo "$loc_list"
+}
+
+# Helper returning the list of supported DH groups from CRYPTO_CONFIG_H,
+# without the "PSA_WANT_" prefix. This becomes handy for accelerating DH groups
+# in the following helpers.
+helper_get_psa_dh_group_list () {
+    loc_list=""
+    for item in $(sed -n 's/^#define PSA_WANT_\(DH_RFC7919_[0-9]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
+        loc_list="$loc_list $item"
+    done
+
+    echo "$loc_list"
+}
+
+# Get the list of uncommented PSA_WANT_KEY_TYPE_xxx_ from CRYPTO_CONFIG_H. This
+# is useful to easily get a list of key type symbols to accelerate.
+# The function accepts a single argument which is the key type: ECC, DH, RSA.
+helper_get_psa_key_type_list() {
+    key_type="$1"
+    loc_list=""
+    for item in $(sed -n "s/^#define PSA_WANT_\(KEY_TYPE_${key_type}_[0-9A-Z_a-z]*\).*/\1/p" <"$CRYPTO_CONFIG_H"); do
+        # Skip DERIVE for elliptic keys since there is no driver dispatch for
+        # it so it cannot be accelerated.
+        if [ "$item" != "KEY_TYPE_ECC_KEY_PAIR_DERIVE" ]; then
+            loc_list="$loc_list $item"
+        fi
+    done
+
+    echo "$loc_list"
+}
+
+################################################################
+#### Misc. helpers for components
+################################################################
+
+helper_armc6_build_test()
+{
+    FLAGS="$1"
+
+    msg "build: ARM Compiler 6 ($FLAGS)"
+    make clean
+    ARM_TOOL_VARIANT="ult" CC="$ARMC6_CC" AR="$ARMC6_AR" CFLAGS="$FLAGS" \
+                    WARNING_CFLAGS='-Werror -xc -std=c99' make lib
+
+    msg "size: ARM Compiler 6 ($FLAGS)"
+    "$ARMC6_FROMELF" -z library/*.o
+    if [ -n "${PSA_CORE_PATH}" ]; then
+        "$ARMC6_FROMELF" -z ${PSA_CORE_PATH}/*.o
+    fi
+    if [ -n "${BUILTIN_SRC_PATH}" ]; then
+        "$ARMC6_FROMELF" -z ${BUILTIN_SRC_PATH}/*.o
+    fi
+}
+
+clang_version() {
+    if command -v clang > /dev/null ; then
+        clang --version|grep version|sed -E 's#.*version ([0-9]+).*#\1#'
+    else
+        echo 0  # report version 0 for "no clang"
+    fi
+}
+
+gcc_version() {
+    gcc="$1"
+    if command -v "$gcc" > /dev/null ; then
+        "$gcc" --version | sed -En '1s/^[^ ]* \([^)]*\) ([0-9]+).*/\1/p'
+    else
+        echo 0  # report version 0 for "no gcc"
+    fi
+}
+
+can_run_cc_output() {
+    cc="$1"
+    result=false
+    if type "$cc" >/dev/null 2>&1; then
+        testbin=$(mktemp)
+        if echo 'int main(void){return 0;}' | "$cc" -o "$testbin" -x c -; then
+            if "$testbin" 2>/dev/null; then
+                result=true
+            fi
+        fi
+        rm -f "$testbin"
+    fi
+    $result
+}
+
+can_run_arm_linux_gnueabi=
+can_run_arm_linux_gnueabi () {
+    if [ -z "$can_run_arm_linux_gnueabi" ]; then
+        if can_run_cc_output "${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc"; then
+            can_run_arm_linux_gnueabi=true
+        else
+            can_run_arm_linux_gnueabi=false
+        fi
+    fi
+    $can_run_arm_linux_gnueabi
+}
+
+can_run_arm_linux_gnueabihf=
+can_run_arm_linux_gnueabihf () {
+    if [ -z "$can_run_arm_linux_gnueabihf" ]; then
+        if can_run_cc_output "${ARM_LINUX_GNUEABIHF_GCC_PREFIX}gcc"; then
+            can_run_arm_linux_gnueabihf=true
+        else
+            can_run_arm_linux_gnueabihf=false
+        fi
+    fi
+    $can_run_arm_linux_gnueabihf
+}
+
+can_run_aarch64_linux_gnu=
+can_run_aarch64_linux_gnu () {
+    if [ -z "$can_run_aarch64_linux_gnu" ]; then
+        if can_run_cc_output "${AARCH64_LINUX_GNU_GCC_PREFIX}gcc"; then
+            can_run_aarch64_linux_gnu=true
+        else
+            can_run_aarch64_linux_gnu=false
+        fi
+    fi
+    $can_run_aarch64_linux_gnu
+}
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 1a73020..6708de1 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -5,1130 +5,11 @@
 # Copyright The Mbed TLS Contributors
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 
+# This file is executable; it is the entry point for users and the CI.
+# See "Files structure" in all-core.sh for other files used.
 
-
-################################################################
-#### Documentation
-################################################################
-
-# Purpose
-# -------
-#
-# To run all tests possible or available on the platform.
-#
-# Notes for users
-# ---------------
-#
-# Warning: the test is destructive. It includes various build modes and
-# configurations, and can and will arbitrarily change the current CMake
-# configuration. The following files must be committed into git:
-#    * include/mbedtls/mbedtls_config.h
-#    * Makefile, library/Makefile, programs/Makefile, tests/Makefile,
-#      programs/fuzz/Makefile
-# After running this script, the CMake cache will be lost and CMake
-# will no longer be initialised.
-#
-# The script assumes the presence of a number of tools:
-#   * Basic Unix tools (Windows users note: a Unix-style find must be before
-#     the Windows find in the PATH)
-#   * Perl
-#   * GNU Make
-#   * CMake
-#   * GCC and Clang (recent enough for using ASan with gcc and MemSan with clang, or valgrind)
-#   * G++
-#   * arm-gcc and mingw-gcc
-#   * ArmCC 5 and ArmCC 6, unless invoked with --no-armcc
-#   * OpenSSL and GnuTLS command line tools, in suitable versions for the
-#     interoperability tests. The following are the official versions at the
-#     time of writing:
-#     * GNUTLS_{CLI,SERV} = 3.4.10
-#     * GNUTLS_NEXT_{CLI,SERV} = 3.7.2
-#     * OPENSSL = 1.0.2g (without Debian/Ubuntu patches)
-#     * OPENSSL_NEXT = 3.1.2
-# See the invocation of check_tools below for details.
-#
-# This script must be invoked from the toplevel directory of a git
-# working copy of Mbed TLS.
-#
-# The behavior on an error depends on whether --keep-going (alias -k)
-# is in effect.
-#  * Without --keep-going: the script stops on the first error without
-#    cleaning up. This lets you work in the configuration of the failing
-#    component.
-#  * With --keep-going: the script runs all requested components and
-#    reports failures at the end. In particular the script always cleans
-#    up on exit.
-#
-# Note that the output is not saved. You may want to run
-#   script -c tests/scripts/all.sh
-# or
-#   tests/scripts/all.sh >all.log 2>&1
-#
-# Notes for maintainers
-# ---------------------
-#
-# The bulk of the code is organized into functions that follow one of the
-# following naming conventions:
-#  * pre_XXX: things to do before running the tests, in order.
-#  * component_XXX: independent components. They can be run in any order.
-#      * component_check_XXX: quick tests that aren't worth parallelizing.
-#      * component_build_XXX: build things but don't run them.
-#      * component_test_XXX: build and test.
-#      * component_release_XXX: tests that the CI should skip during PR testing.
-#  * support_XXX: if support_XXX exists and returns false then
-#    component_XXX is not run by default.
-#  * post_XXX: things to do after running the tests.
-#  * other: miscellaneous support functions.
-#
-# Each component must start by invoking `msg` with a short informative message.
-#
-# Warning: due to the way bash detects errors, the failure of a command
-# inside 'if' or '!' is not detected. Use the 'not' function instead of '!'.
-#
-# Each component is executed in a separate shell process. The component
-# fails if any command in it returns a non-zero status.
-#
-# The framework performs some cleanup tasks after each component. This
-# means that components can assume that the working directory is in a
-# cleaned-up state, and don't need to perform the cleanup themselves.
-# * Run `make clean`.
-# * Restore `include/mbedtls/mbedtls_config.h` from a backup made before running
-#   the component.
-# * Check out `Makefile`, `library/Makefile`, `programs/Makefile`,
-#   `tests/Makefile` and `programs/fuzz/Makefile` from git.
-#   This cleans up after an in-tree use of CMake.
-#
-# The tests are roughly in order from fastest to slowest. This doesn't
-# have to be exact, but in general you should add slower tests towards
-# the end and fast checks near the beginning.
-
-
-
-################################################################
-#### Initialization and command line parsing
-################################################################
-
-# Abort on errors (even on the left-hand side of a pipe).
-# Treat uninitialised variables as errors.
-set -e -o pipefail -u
-
-# Enable ksh/bash extended file matching patterns
-shopt -s extglob
-
-# For project detection
-in_mbedtls_repo () {
-    test "$PROJECT_NAME" = "Mbed TLS"
-}
-
-in_tf_psa_crypto_repo () {
-    test "$PROJECT_NAME" = "TF-PSA-Crypto"
-}
-
-pre_check_environment () {
-    # For project detection
-    PROJECT_NAME_FILE='./scripts/project_name.txt'
-    if read -r PROJECT_NAME < "$PROJECT_NAME_FILE"; then :; else
-        echo "$PROJECT_NAME_FILE does not exist... Exiting..." >&2
-        exit 1
-    fi
-
-    if in_mbedtls_repo || in_tf_psa_crypto_repo; then :; else
-        echo "Must be run from Mbed TLS / TF-PSA-Crypto root" >&2
-        exit 1
-    fi
-}
-
-pre_initialize_variables () {
-    if in_mbedtls_repo; then
-        CONFIG_H='include/mbedtls/mbedtls_config.h'
-    else
-        CONFIG_H='drivers/builtin/include/mbedtls/mbedtls_config.h'
-    fi
-    CRYPTO_CONFIG_H='include/psa/crypto_config.h'
-    CONFIG_TEST_DRIVER_H='tests/include/test/drivers/config_test_driver.h'
-
-    # Files that are clobbered by some jobs will be backed up. Use a different
-    # suffix from auxiliary scripts so that all.sh and auxiliary scripts can
-    # independently decide when to remove the backup file.
-    backup_suffix='.all.bak'
-    # Files clobbered by config.py
-    files_to_back_up="$CONFIG_H $CRYPTO_CONFIG_H $CONFIG_TEST_DRIVER_H"
-    if in_mbedtls_repo; then
-        # Files clobbered by in-tree cmake
-        files_to_back_up="$files_to_back_up Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile"
-    fi
-
-    append_outcome=0
-    MEMORY=0
-    FORCE=0
-    QUIET=0
-    KEEP_GOING=0
-
-    # Seed value used with the --release-test option.
-    #
-    # See also RELEASE_SEED in basic-build-test.sh. Debugging is easier if
-    # both values are kept in sync. If you change the value here because it
-    # breaks some tests, you'll definitely want to change it in
-    # basic-build-test.sh as well.
-    RELEASE_SEED=1
-
-    # Specify character collation for regular expressions and sorting with C locale
-    export LC_COLLATE=C
-
-    : ${MBEDTLS_TEST_OUTCOME_FILE=}
-    : ${MBEDTLS_TEST_PLATFORM="$(uname -s | tr -c \\n0-9A-Za-z _)-$(uname -m | tr -c \\n0-9A-Za-z _)"}
-    export MBEDTLS_TEST_OUTCOME_FILE
-    export MBEDTLS_TEST_PLATFORM
-
-    # Default commands, can be overridden by the environment
-    : ${OPENSSL:="openssl"}
-    : ${OPENSSL_NEXT:="$OPENSSL"}
-    : ${GNUTLS_CLI:="gnutls-cli"}
-    : ${GNUTLS_SERV:="gnutls-serv"}
-    : ${OUT_OF_SOURCE_DIR:=./mbedtls_out_of_source_build}
-    : ${ARMC5_BIN_DIR:=/usr/bin}
-    : ${ARMC6_BIN_DIR:=/usr/bin}
-    : ${ARM_NONE_EABI_GCC_PREFIX:=arm-none-eabi-}
-    : ${ARM_LINUX_GNUEABI_GCC_PREFIX:=arm-linux-gnueabi-}
-    : ${CLANG_LATEST:="clang-latest"}
-    : ${CLANG_EARLIEST:="clang-earliest"}
-    : ${GCC_LATEST:="gcc-latest"}
-    : ${GCC_EARLIEST:="gcc-earliest"}
-    # if MAKEFLAGS is not set add the -j option to speed up invocations of make
-    if [ -z "${MAKEFLAGS+set}" ]; then
-        export MAKEFLAGS="-j$(all_sh_nproc)"
-    fi
-    # if CC is not set, use clang by default (if present) to improve build times
-    if [ -z "${CC+set}" ] && (type clang > /dev/null 2>&1); then
-        export CC="clang"
-    fi
-
-    if [ -n "${OPENSSL_3+set}" ]; then
-        export OPENSSL_NEXT="$OPENSSL_3"
-    fi
-
-    # Include more verbose output for failing tests run by CMake or make
-    export CTEST_OUTPUT_ON_FAILURE=1
-
-    # CFLAGS and LDFLAGS for Asan builds that don't use CMake
-    # default to -O2, use -Ox _after_ this if you want another level
-    ASAN_CFLAGS='-O2 -Werror -fsanitize=address,undefined -fno-sanitize-recover=all'
-    # Normally, tests should use this compiler for ASAN testing
-    ASAN_CC=clang
-
-    # Platform tests have an allocation that returns null
-    export ASAN_OPTIONS="allocator_may_return_null=1"
-    export MSAN_OPTIONS="allocator_may_return_null=1"
-
-    # Gather the list of available components. These are the functions
-    # defined in this script whose name starts with "component_".
-    ALL_COMPONENTS=$(compgen -A function component_ | sed 's/component_//')
-
-    # Delay determining SUPPORTED_COMPONENTS until the command line options have a chance to override
-    # the commands set by the environment
-}
-
-setup_quiet_wrappers()
-{
-    # Pick up "quiet" wrappers for make and cmake, which don't output very much
-    # unless there is an error. This reduces logging overhead in the CI.
-    #
-    # Note that the cmake wrapper breaks unless we use an absolute path here.
-    if [[ -e ${PWD}/tests/scripts/quiet ]]; then
-        export PATH=${PWD}/tests/scripts/quiet:$PATH
-    fi
-}
-
-# Test whether the component $1 is included in the command line patterns.
-is_component_included()
-{
-    # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS
-    # only does word splitting.
-    set -f
-    for pattern in $COMMAND_LINE_COMPONENTS; do
-        set +f
-        case ${1#component_} in $pattern) return 0;; esac
-    done
-    set +f
-    return 1
-}
-
-usage()
-{
-    cat <<EOF
-Usage: $0 [OPTION]... [COMPONENT]...
-Run mbedtls release validation tests.
-By default, run all tests. With one or more COMPONENT, run only those.
-COMPONENT can be the name of a component or a shell wildcard pattern.
-
-Examples:
-  $0 "check_*"
-    Run all sanity checks.
-  $0 --no-armcc --except test_memsan
-    Run everything except builds that require armcc and MemSan.
-
-Special options:
-  -h|--help             Print this help and exit.
-  --list-all-components List all available test components and exit.
-  --list-components     List components supported on this platform and exit.
-
-General options:
-  -q|--quiet            Only output component names, and errors if any.
-  -f|--force            Force the tests to overwrite any modified files.
-  -k|--keep-going       Run all tests and report errors at the end.
-  -m|--memory           Additional optional memory tests.
-     --append-outcome   Append to the outcome file (if used).
-     --arm-none-eabi-gcc-prefix=<string>
-                        Prefix for a cross-compiler for arm-none-eabi
-                        (default: "${ARM_NONE_EABI_GCC_PREFIX}")
-     --arm-linux-gnueabi-gcc-prefix=<string>
-                        Prefix for a cross-compiler for arm-linux-gnueabi
-                        (default: "${ARM_LINUX_GNUEABI_GCC_PREFIX}")
-     --armcc            Run ARM Compiler builds (on by default).
-     --restore          First clean up the build tree, restoring backed up
-                        files. Do not run any components unless they are
-                        explicitly specified.
-     --error-test       Error test mode: run a failing function in addition
-                        to any specified component. May be repeated.
-     --except           Exclude the COMPONENTs listed on the command line,
-                        instead of running only those.
-     --no-append-outcome    Write a new outcome file and analyze it (default).
-     --no-armcc         Skip ARM Compiler builds.
-     --no-force         Refuse to overwrite modified files (default).
-     --no-keep-going    Stop at the first error (default).
-     --no-memory        No additional memory tests (default).
-     --no-quiet         Print full output from components.
-     --out-of-source-dir=<path>  Directory used for CMake out-of-source build tests.
-     --outcome-file=<path>  File where test outcomes are written (not done if
-                            empty; default: \$MBEDTLS_TEST_OUTCOME_FILE).
-     --random-seed      Use a random seed value for randomized tests (default).
-  -r|--release-test     Run this script in release mode. This fixes the seed value to ${RELEASE_SEED}.
-  -s|--seed             Integer seed value to use for this test run.
-
-Tool path options:
-     --armc5-bin-dir=<ARMC5_bin_dir_path>       ARM Compiler 5 bin directory.
-     --armc6-bin-dir=<ARMC6_bin_dir_path>       ARM Compiler 6 bin directory.
-     --clang-earliest=<Clang_earliest_path>     Earliest version of clang available
-     --clang-latest=<Clang_latest_path>         Latest version of clang available
-     --gcc-earliest=<GCC_earliest_path>         Earliest version of GCC available
-     --gcc-latest=<GCC_latest_path>             Latest version of GCC available
-     --gnutls-cli=<GnuTLS_cli_path>             GnuTLS client executable to use for most tests.
-     --gnutls-serv=<GnuTLS_serv_path>           GnuTLS server executable to use for most tests.
-     --openssl=<OpenSSL_path>                   OpenSSL executable to use for most tests.
-     --openssl-next=<OpenSSL_path>              OpenSSL executable to use for recent things like ARIA
-EOF
-}
-
-# Cleanup before/after running a component.
-# Remove built files as well as the cmake cache/config.
-# Does not remove generated source files.
-cleanup()
-{
-    if in_mbedtls_repo; then
-        command make clean
-    fi
-
-    # Remove CMake artefacts
-    find . -name .git -prune -o \
-           -iname CMakeFiles -exec rm -rf {} \+ -o \
-           \( -iname cmake_install.cmake -o \
-              -iname CTestTestfile.cmake -o \
-              -iname CMakeCache.txt -o \
-              -path './cmake/*.cmake' \) -exec rm -f {} \+
-    # Remove Makefiles generated by in-tree CMake builds
-    rm -f 3rdparty/Makefile 3rdparty/*/Makefile pkgconfig/Makefile framework/Makefile
-    rm -f include/Makefile programs/!(fuzz)/Makefile
-
-    # Remove any artifacts from the component_test_cmake_as_subdirectory test.
-    rm -rf programs/test/cmake_subproject/build
-    rm -f programs/test/cmake_subproject/Makefile
-    rm -f programs/test/cmake_subproject/cmake_subproject
-
-    # Remove any artifacts from the component_test_cmake_as_package test.
-    rm -rf programs/test/cmake_package/build
-    rm -f programs/test/cmake_package/Makefile
-    rm -f programs/test/cmake_package/cmake_package
-
-    # Remove any artifacts from the component_test_cmake_as_installed_package test.
-    rm -rf programs/test/cmake_package_install/build
-    rm -f programs/test/cmake_package_install/Makefile
-    rm -f programs/test/cmake_package_install/cmake_package_install
-
-    # Restore files that may have been clobbered by the job
-    for x in $files_to_back_up; do
-        if [[ -e "$x$backup_suffix" ]]; then
-            cp -p "$x$backup_suffix" "$x"
-        fi
-    done
-}
-
-# Final cleanup when this script exits (except when exiting on a failure
-# in non-keep-going mode).
-final_cleanup () {
-    cleanup
-
-    for x in $files_to_back_up; do
-        rm -f "$x$backup_suffix"
-    done
-}
-
-# Executed on exit. May be redefined depending on command line options.
-final_report () {
-    :
-}
-
-fatal_signal () {
-    final_cleanup
-    final_report $1
-    trap - $1
-    kill -$1 $$
-}
-
-trap 'fatal_signal HUP' HUP
-trap 'fatal_signal INT' INT
-trap 'fatal_signal TERM' TERM
-
-# Number of processors on this machine. Used as the default setting
-# for parallel make.
-all_sh_nproc ()
-{
-    {
-        nproc || # Linux
-        sysctl -n hw.ncpuonline || # NetBSD, OpenBSD
-        sysctl -n hw.ncpu || # FreeBSD
-        echo 1
-    } 2>/dev/null
-}
-
-msg()
-{
-    if [ -n "${current_component:-}" ]; then
-        current_section="${current_component#component_}: $1"
-    else
-        current_section="$1"
-    fi
-
-    if [ $QUIET -eq 1 ]; then
-        return
-    fi
-
-    echo ""
-    echo "******************************************************************"
-    echo "* $current_section "
-    printf "* "; date
-    echo "******************************************************************"
-}
-
-armc6_build_test()
-{
-    FLAGS="$1"
-
-    msg "build: ARM Compiler 6 ($FLAGS)"
-    make clean
-    ARM_TOOL_VARIANT="ult" CC="$ARMC6_CC" AR="$ARMC6_AR" CFLAGS="$FLAGS" \
-                    WARNING_CFLAGS='-Werror -xc -std=c99' make lib
-
-    msg "size: ARM Compiler 6 ($FLAGS)"
-    "$ARMC6_FROMELF" -z library/*.o
-}
-
-err_msg()
-{
-    echo "$1" >&2
-}
-
-check_tools()
-{
-    for tool in "$@"; do
-        if ! `type "$tool" >/dev/null 2>&1`; then
-            err_msg "$tool not found!"
-            exit 1
-        fi
-    done
-}
-
-pre_parse_command_line () {
-    COMMAND_LINE_COMPONENTS=
-    all_except=0
-    error_test=0
-    list_components=0
-    restore_first=0
-    no_armcc=
-
-    # Note that legacy options are ignored instead of being omitted from this
-    # list of options, so invocations that worked with previous version of
-    # all.sh will still run and work properly.
-    while [ $# -gt 0 ]; do
-        case "$1" in
-            --append-outcome) append_outcome=1;;
-            --arm-none-eabi-gcc-prefix) shift; ARM_NONE_EABI_GCC_PREFIX="$1";;
-            --arm-linux-gnueabi-gcc-prefix) shift; ARM_LINUX_GNUEABI_GCC_PREFIX="$1";;
-            --armcc) no_armcc=;;
-            --armc5-bin-dir) shift; ARMC5_BIN_DIR="$1";;
-            --armc6-bin-dir) shift; ARMC6_BIN_DIR="$1";;
-            --clang-earliest) shift; CLANG_EARLIEST="$1";;
-            --clang-latest) shift; CLANG_LATEST="$1";;
-            --error-test) error_test=$((error_test + 1));;
-            --except) all_except=1;;
-            --force|-f) FORCE=1;;
-            --gcc-earliest) shift; GCC_EARLIEST="$1";;
-            --gcc-latest) shift; GCC_LATEST="$1";;
-            --gnutls-cli) shift; GNUTLS_CLI="$1";;
-            --gnutls-legacy-cli) shift;; # ignored for backward compatibility
-            --gnutls-legacy-serv) shift;; # ignored for backward compatibility
-            --gnutls-serv) shift; GNUTLS_SERV="$1";;
-            --help|-h) usage; exit;;
-            --keep-going|-k) KEEP_GOING=1;;
-            --list-all-components) printf '%s\n' $ALL_COMPONENTS; exit;;
-            --list-components) list_components=1;;
-            --memory|-m) MEMORY=1;;
-            --no-append-outcome) append_outcome=0;;
-            --no-armcc) no_armcc=1;;
-            --no-force) FORCE=0;;
-            --no-keep-going) KEEP_GOING=0;;
-            --no-memory) MEMORY=0;;
-            --no-quiet) QUIET=0;;
-            --openssl) shift; OPENSSL="$1";;
-            --openssl-next) shift; OPENSSL_NEXT="$1";;
-            --outcome-file) shift; MBEDTLS_TEST_OUTCOME_FILE="$1";;
-            --out-of-source-dir) shift; OUT_OF_SOURCE_DIR="$1";;
-            --quiet|-q) QUIET=1;;
-            --random-seed) unset SEED;;
-            --release-test|-r) SEED=$RELEASE_SEED;;
-            --restore) restore_first=1;;
-            --seed|-s) shift; SEED="$1";;
-            -*)
-                echo >&2 "Unknown option: $1"
-                echo >&2 "Run $0 --help for usage."
-                exit 120
-                ;;
-            *) COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS $1";;
-        esac
-        shift
-    done
-
-    # Exclude components that are not supported on this platform.
-    SUPPORTED_COMPONENTS=
-    for component in $ALL_COMPONENTS; do
-        case $(type "support_$component" 2>&1) in
-            *' function'*)
-                if ! support_$component; then continue; fi;;
-        esac
-        SUPPORTED_COMPONENTS="$SUPPORTED_COMPONENTS $component"
-    done
-
-    if [ $list_components -eq 1 ]; then
-        printf '%s\n' $SUPPORTED_COMPONENTS
-        exit
-    fi
-
-    # With no list of components, run everything.
-    if [ -z "$COMMAND_LINE_COMPONENTS" ] && [ $restore_first -eq 0 ]; then
-        all_except=1
-    fi
-
-    # --no-armcc is a legacy option. The modern way is --except '*_armcc*'.
-    # Ignore it if components are listed explicitly on the command line.
-    if [ -n "$no_armcc" ] && [ $all_except -eq 1 ]; then
-        COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS *_armcc*"
-    fi
-
-    # Error out if an explicitly requested component doesn't exist.
-    if [ $all_except -eq 0 ]; then
-        unsupported=0
-        # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS
-        # only does word splitting.
-        set -f
-        for component in $COMMAND_LINE_COMPONENTS; do
-            set +f
-            # If the requested name includes a wildcard character, don't
-            # check it. Accept wildcard patterns that don't match anything.
-            case $component in
-                *[*?\[]*) continue;;
-            esac
-            case " $SUPPORTED_COMPONENTS " in
-                *" $component "*) :;;
-                *)
-                    echo >&2 "Component $component was explicitly requested, but is not known or not supported."
-                    unsupported=$((unsupported + 1));;
-            esac
-        done
-        set +f
-        if [ $unsupported -ne 0 ]; then
-            exit 2
-        fi
-    fi
-
-    # Build the list of components to run.
-    RUN_COMPONENTS=
-    for component in $SUPPORTED_COMPONENTS; do
-        if is_component_included "$component"; [ $? -eq $all_except ]; then
-            RUN_COMPONENTS="$RUN_COMPONENTS $component"
-        fi
-    done
-
-    unset all_except
-    unset no_armcc
-}
-
-pre_check_git () {
-    if [ $FORCE -eq 1 ]; then
-        rm -rf "$OUT_OF_SOURCE_DIR"
-        git checkout-index -f -q $CONFIG_H
-        cleanup
-    else
-
-        if [ -d "$OUT_OF_SOURCE_DIR" ]; then
-            echo "Warning - there is an existing directory at '$OUT_OF_SOURCE_DIR'" >&2
-            echo "You can either delete this directory manually, or force the test by rerunning"
-            echo "the script as: $0 --force --out-of-source-dir $OUT_OF_SOURCE_DIR"
-            exit 1
-        fi
-
-        if ! git diff --quiet "$CONFIG_H"; then
-            err_msg "Warning - the configuration file '$CONFIG_H' has been edited. "
-            echo "You can either delete or preserve your work, or force the test by rerunning the"
-            echo "script as: $0 --force"
-            exit 1
-        fi
-    fi
-}
-
-pre_restore_files () {
-    # If the makefiles have been generated by a framework such as cmake,
-    # restore them from git. If the makefiles look like modifications from
-    # the ones checked into git, take care not to modify them. Whatever
-    # this function leaves behind is what the script will restore before
-    # each component.
-    case "$(head -n1 Makefile)" in
-        *[Gg]enerated*)
-            git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
-            git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
-            ;;
-    esac
-}
-
-pre_back_up () {
-    for x in $files_to_back_up; do
-        cp -p "$x" "$x$backup_suffix"
-    done
-}
-
-pre_setup_keep_going () {
-    failure_count=0 # Number of failed components
-    last_failure_status=0 # Last failure status in this component
-
-    # See err_trap
-    previous_failure_status=0
-    previous_failed_command=
-    previous_failure_funcall_depth=0
-    unset report_failed_command
-
-    start_red=
-    end_color=
-    if [ -t 1 ]; then
-        case "${TERM:-}" in
-            *color*|cygwin|linux|rxvt*|screen|[Eex]term*)
-                start_red=$(printf '\033[31m')
-                end_color=$(printf '\033[0m')
-                ;;
-        esac
-    fi
-
-    # Keep a summary of failures in a file. We'll print it out at the end.
-    failure_summary_file=$PWD/all-sh-failures-$$.log
-    : >"$failure_summary_file"
-
-    # Whether it makes sense to keep a component going after the specified
-    # command fails (test command) or not (configure or build).
-    # This function normally receives the failing simple command
-    # ($BASH_COMMAND) as an argument, but if $report_failed_command is set,
-    # this is passed instead.
-    # This doesn't have to be 100% accurate: all failures are recorded anyway.
-    # False positives result in running things that can't be expected to
-    # work. False negatives result in things not running after something else
-    # failed even though they might have given useful feedback.
-    can_keep_going_after_failure () {
-        case "$1" in
-            "msg "*) false;;
-            "cd "*) false;;
-            "diff "*) true;;
-            *make*[\ /]tests*) false;; # make tests, make CFLAGS=-I../tests, ...
-            *test*) true;; # make test, tests/stuff, env V=v tests/stuff, ...
-            *make*check*) true;;
-            "grep "*) true;;
-            "[ "*) true;;
-            "! "*) true;;
-            *) false;;
-        esac
-    }
-
-    # This function runs if there is any error in a component.
-    # It must either exit with a nonzero status, or set
-    # last_failure_status to a nonzero value.
-    err_trap () {
-        # Save $? (status of the failing command). This must be the very
-        # first thing, before $? is overridden.
-        last_failure_status=$?
-        failed_command=${report_failed_command-$BASH_COMMAND}
-
-        if [[ $last_failure_status -eq $previous_failure_status &&
-              "$failed_command" == "$previous_failed_command" &&
-              ${#FUNCNAME[@]} == $((previous_failure_funcall_depth - 1)) ]]
-        then
-            # The same command failed twice in a row, but this time one level
-            # less deep in the function call stack. This happens when the last
-            # command of a function returns a nonzero status, and the function
-            # returns that same status. Ignore the second failure.
-            previous_failure_funcall_depth=${#FUNCNAME[@]}
-            return
-        fi
-        previous_failure_status=$last_failure_status
-        previous_failed_command=$failed_command
-        previous_failure_funcall_depth=${#FUNCNAME[@]}
-
-        text="$current_section: $failed_command -> $last_failure_status"
-        echo "${start_red}^^^^$text^^^^${end_color}" >&2
-        echo "$text" >>"$failure_summary_file"
-
-        # If the command is fatal (configure or build command), stop this
-        # component. Otherwise (test command) keep the component running
-        # (run more tests from the same build).
-        if ! can_keep_going_after_failure "$failed_command"; then
-            exit $last_failure_status
-        fi
-    }
-
-    final_report () {
-        if [ $failure_count -gt 0 ]; then
-            echo
-            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
-            echo "${start_red}FAILED: $failure_count components${end_color}"
-            cat "$failure_summary_file"
-            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
-        elif [ -z "${1-}" ]; then
-            echo "SUCCESS :)"
-        fi
-        if [ -n "${1-}" ]; then
-            echo "Killed by SIG$1."
-        fi
-        rm -f "$failure_summary_file"
-        if [ $failure_count -gt 0 ]; then
-            exit 1
-        fi
-    }
-}
-
-# record_status() and if_build_succeeded() are kept temporarily for backward
-# compatibility. Don't use them in new components.
-record_status () {
-    "$@"
-}
-if_build_succeeded () {
-    "$@"
-}
-
-# '! true' does not trigger the ERR trap. Arrange to trigger it, with
-# a reasonably informative error message (not just "$@").
-not () {
-    if "$@"; then
-        report_failed_command="! $*"
-        false
-        unset report_failed_command
-    fi
-}
-
-pre_prepare_outcome_file () {
-    case "$MBEDTLS_TEST_OUTCOME_FILE" in
-      [!/]*) MBEDTLS_TEST_OUTCOME_FILE="$PWD/$MBEDTLS_TEST_OUTCOME_FILE";;
-    esac
-    if [ -n "$MBEDTLS_TEST_OUTCOME_FILE" ] && [ "$append_outcome" -eq 0 ]; then
-        rm -f "$MBEDTLS_TEST_OUTCOME_FILE"
-    fi
-}
-
-pre_print_configuration () {
-    if [ $QUIET -eq 1 ]; then
-        return
-    fi
-
-    msg "info: $0 configuration"
-    echo "MEMORY: $MEMORY"
-    echo "FORCE: $FORCE"
-    echo "MBEDTLS_TEST_OUTCOME_FILE: ${MBEDTLS_TEST_OUTCOME_FILE:-(none)}"
-    echo "SEED: ${SEED-"UNSET"}"
-    echo
-    echo "OPENSSL: $OPENSSL"
-    echo "OPENSSL_NEXT: $OPENSSL_NEXT"
-    echo "GNUTLS_CLI: $GNUTLS_CLI"
-    echo "GNUTLS_SERV: $GNUTLS_SERV"
-    echo "ARMC5_BIN_DIR: $ARMC5_BIN_DIR"
-    echo "ARMC6_BIN_DIR: $ARMC6_BIN_DIR"
-}
-
-# Make sure the tools we need are available.
-pre_check_tools () {
-    # Build the list of variables to pass to output_env.sh.
-    set env
-
-    case " $RUN_COMPONENTS " in
-        # Require OpenSSL and GnuTLS if running any tests (as opposed to
-        # only doing builds). Not all tests run OpenSSL and GnuTLS, but this
-        # is a good enough approximation in practice.
-        *" test_"* | *" release_test_"*)
-            # To avoid setting OpenSSL and GnuTLS for each call to compat.sh
-            # and ssl-opt.sh, we just export the variables they require.
-            export OPENSSL="$OPENSSL"
-            export GNUTLS_CLI="$GNUTLS_CLI"
-            export GNUTLS_SERV="$GNUTLS_SERV"
-            # Avoid passing --seed flag in every call to ssl-opt.sh
-            if [ -n "${SEED-}" ]; then
-                export SEED
-            fi
-            set "$@" OPENSSL="$OPENSSL"
-            set "$@" GNUTLS_CLI="$GNUTLS_CLI" GNUTLS_SERV="$GNUTLS_SERV"
-            check_tools "$OPENSSL" "$OPENSSL_NEXT" \
-                        "$GNUTLS_CLI" "$GNUTLS_SERV"
-            ;;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_doxygen[_\ ]*) check_tools "doxygen" "dot";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_arm_none_eabi_gcc[_\ ]*) check_tools "${ARM_NONE_EABI_GCC_PREFIX}gcc";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_mingw[_\ ]*) check_tools "i686-w64-mingw32-gcc";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *" test_zeroize "*) check_tools "gdb";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_armcc*)
-            ARMC5_CC="$ARMC5_BIN_DIR/armcc"
-            ARMC5_AR="$ARMC5_BIN_DIR/armar"
-            ARMC5_FROMELF="$ARMC5_BIN_DIR/fromelf"
-            ARMC6_CC="$ARMC6_BIN_DIR/armclang"
-            ARMC6_AR="$ARMC6_BIN_DIR/armar"
-            ARMC6_FROMELF="$ARMC6_BIN_DIR/fromelf"
-            check_tools "$ARMC5_CC" "$ARMC5_AR" "$ARMC5_FROMELF" \
-                        "$ARMC6_CC" "$ARMC6_AR" "$ARMC6_FROMELF";;
-    esac
-
-    # past this point, no call to check_tool, only printing output
-    if [ $QUIET -eq 1 ]; then
-        return
-    fi
-
-    msg "info: output_env.sh"
-    case $RUN_COMPONENTS in
-        *_armcc*)
-            set "$@" ARMC5_CC="$ARMC5_CC" ARMC6_CC="$ARMC6_CC" RUN_ARMCC=1;;
-        *) set "$@" RUN_ARMCC=0;;
-    esac
-    "$@" scripts/output_env.sh
-}
-
-pre_generate_files () {
-    # since make doesn't have proper dependencies, remove any possibly outdate
-    # file that might be around before generating fresh ones
-    make neat
-    if [ $QUIET -eq 1 ]; then
-        make generated_files >/dev/null
-    else
-        make generated_files
-    fi
-}
-
-clang_version () {
-    if command -v clang > /dev/null ; then
-        clang --version|grep version|sed -E 's#.*version ([0-9]+).*#\1#'
-    else
-        echo 0  # report version 0 for "no clang"
-    fi
-}
-
-################################################################
-#### Helpers for components using libtestdriver1
-################################################################
-
-# How to use libtestdriver1
-# -------------------------
-#
-# 1. Define the list algorithms and key types to accelerate,
-#    designated the same way as PSA_WANT_ macros but without PSA_WANT_.
-#    Examples:
-#      - loc_accel_list="ALG_JPAKE"
-#      - loc_accel_list="ALG_FFDH KEY_TYPE_DH_KEY_PAIR KEY_TYPE_DH_PUBLIC_KEY"
-# 2. Make configurations changes for the driver and/or main libraries.
-#    2a. Call helper_libtestdriver1_adjust_config <base>, where the argument
-#        can be either "default" to start with the default config, or a name
-#        supported by scripts/config.py (for example, "full"). This selects
-#        the base to use, and makes common adjustments.
-#    2b. If desired, adjust the PSA_WANT symbols in psa/crypto_config.h.
-#        These changes affect both the driver and the main libraries.
-#        (Note: they need to have the same set of PSA_WANT symbols, as that
-#        determines the ABI between them.)
-#    2c. Adjust MBEDTLS_ symbols in mbedtls_config.h. This only affects the
-#        main libraries. Typically, you want to disable the module(s) that are
-#        being accelerated. You may need to also disable modules that depend
-#        on them or options that are not supported with drivers.
-#    2d. On top of psa/crypto_config.h, the driver library uses its own config
-#        file: tests/include/test/drivers/config_test_driver.h. You usually
-#        don't need to edit it: using loc_extra_list (see below) is preferred.
-#        However, when there's no PSA symbol for what you want to enable,
-#        calling scripts/config.py on this file remains the only option.
-# 3. Build the driver library, then the main libraries, test, and programs.
-#    3a. Call helper_libtestdriver1_make_drivers "$loc_accel_list". You may
-#        need to enable more algorithms here, typically hash algorithms when
-#        accelerating some signature algorithms (ECDSA, RSAv2). This is done
-#        by passing a 2nd argument listing the extra algorithms.
-#        Example:
-#          loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512"
-#          helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
-#    3b. Call helper_libtestdriver1_make_main "$loc_accel_list". Any
-#        additional arguments will be passed to make: this can be useful if
-#        you don't want to build everything when iterating during development.
-#        Example:
-#          helper_libtestdriver1_make_main "$loc_accel_list" -C tests test_suite_foo
-# 4. Run the tests you want.
-
-# Adjust the configuration - for both libtestdriver1 and main library,
-# as they should have the same PSA_WANT macros.
-helper_libtestdriver1_adjust_config () {
-    base_config=$1
-    # Select the base configuration
-    if [ "$base_config" != "default" ]; then
-        scripts/config.py "$base_config"
-    fi
-
-    # Enable PSA-based config (necessary to use drivers)
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
-
-    # Dynamic secure element support is a deprecated feature and needs to be disabled here.
-    # This is done to have the same form of psa_key_attributes_s for libdriver and library.
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-
-    # If threading is enabled on the normal build, then we need to enable it in the drivers as well,
-    # otherwise we will end up running multithreaded tests without mutexes to protect them.
-    if scripts/config.py get MBEDTLS_THREADING_C; then
-        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_THREADING_C
-    fi
-
-    if scripts/config.py get MBEDTLS_THREADING_PTHREAD; then
-        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_THREADING_PTHREAD
-    fi
-}
-
-# When called with no parameter this function disables all builtin curves.
-# The function optionally accepts 1 parameter: a space-separated list of the
-# curves that should be kept enabled.
-helper_disable_builtin_curves () {
-    allowed_list="${1:-}"
-    scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED"
-
-    for curve in $allowed_list; do
-        scripts/config.py set $curve
-    done
-}
-
-# Helper returning the list of supported elliptic curves from CRYPTO_CONFIG_H,
-# without the "PSA_WANT_" prefix. This becomes handy for accelerating curves
-# in the following helpers.
-helper_get_psa_curve_list () {
-    loc_list=""
-    for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
-        loc_list="$loc_list $item"
-    done
-
-    echo "$loc_list"
-}
-
-# Helper returning the list of supported DH groups from CRYPTO_CONFIG_H,
-# without the "PSA_WANT_" prefix. This becomes handy for accelerating DH groups
-# in the following helpers.
-helper_get_psa_dh_group_list () {
-    loc_list=""
-    for item in $(sed -n 's/^#define PSA_WANT_\(DH_RFC7919_[0-9]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
-        loc_list="$loc_list $item"
-    done
-
-    echo "$loc_list"
-}
-
-# Get the list of uncommented PSA_WANT_KEY_TYPE_xxx_ from CRYPTO_CONFIG_H. This
-# is useful to easily get a list of key type symbols to accelerate.
-# The function accepts a single argument which is the key type: ECC, DH, RSA.
-helper_get_psa_key_type_list () {
-    key_type="$1"
-    loc_list=""
-    for item in $(sed -n "s/^#define PSA_WANT_\(KEY_TYPE_${key_type}_[0-9A-Z_a-z]*\).*/\1/p" <"$CRYPTO_CONFIG_H"); do
-        # Skip DERIVE for elliptic keys since there is no driver dispatch for
-        # it so it cannot be accelerated.
-        if [ "$item" != "KEY_TYPE_ECC_KEY_PAIR_DERIVE" ]; then
-            loc_list="$loc_list $item"
-        fi
-    done
-
-    echo "$loc_list"
-}
-
-# Build the drivers library libtestdriver1.a (with ASan).
-#
-# Parameters:
-# 1. a space-separated list of things to accelerate;
-# 2. optional: a space-separate list of things to also support.
-# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
-helper_libtestdriver1_make_drivers () {
-    loc_accel_flags=$( echo "$1 ${2-}" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
-    make CC=$ASAN_CC -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# Build the main libraries, programs and tests,
-# linking to the drivers library (with ASan).
-#
-# Parameters:
-# 1. a space-separated list of things to accelerate;
-# *. remaining arguments if any are passed directly to make
-#    (examples: lib, -C tests test_suite_xxx, etc.)
-# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
-helper_libtestdriver1_make_main () {
-    loc_accel_list=$1
-    shift
-
-    # we need flags both with and without the LIBTESTDRIVER1_ prefix
-    loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
-    loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" "$@"
-}
-
-# Include the components from components.sh
+# The path is going to change when this is moved to the framework
 test_script_dir="${0%/*}"
-for file in "$test_script_dir"/components*.sh; do
-    source $file
-done
+source "$test_script_dir"/all-core.sh
 
-################################################################
-#### Termination
-################################################################
-
-post_report () {
-    msg "Done, cleaning up"
-    final_cleanup
-
-    final_report
-}
-
-################################################################
-#### Run all the things
-################################################################
-
-# Function invoked by --error-test to test error reporting.
-pseudo_component_error_test () {
-    msg "Testing error reporting $error_test_i"
-    if [ $KEEP_GOING -ne 0 ]; then
-        echo "Expect three failing commands."
-    fi
-    # If the component doesn't run in a subshell, changing error_test_i to an
-    # invalid integer will cause an error in the loop that runs this function.
-    error_test_i=this_should_not_be_used_since_the_component_runs_in_a_subshell
-    # Expected error: 'grep non_existent /dev/null -> 1'
-    grep non_existent /dev/null
-    # Expected error: '! grep -q . tests/scripts/all.sh -> 1'
-    not grep -q . "$0"
-    # Expected error: 'make unknown_target -> 2'
-    make unknown_target
-    false "this should not be executed"
-}
-
-# Run one component and clean up afterwards.
-run_component () {
-    current_component="$1"
-    export MBEDTLS_TEST_CONFIGURATION="$current_component"
-
-    # Unconditionally create a seedfile that's sufficiently long.
-    # Do this before each component, because a previous component may
-    # have messed it up or shortened it.
-    local dd_cmd
-    dd_cmd=(dd if=/dev/urandom of=./tests/seedfile bs=64 count=1)
-    case $OSTYPE in
-        linux*|freebsd*|openbsd*) dd_cmd+=(status=none)
-    esac
-    "${dd_cmd[@]}"
-
-    # Run the component in a subshell, with error trapping and output
-    # redirection set up based on the relevant options.
-    if [ $KEEP_GOING -eq 1 ]; then
-        # We want to keep running if the subshell fails, so 'set -e' must
-        # be off when the subshell runs.
-        set +e
-    fi
-    (
-        if [ $QUIET -eq 1 ]; then
-            # msg() will be silenced, so just print the component name here.
-            echo "${current_component#component_}"
-            exec >/dev/null
-        fi
-        if [ $KEEP_GOING -eq 1 ]; then
-            # Keep "set -e" off, and run an ERR trap instead to record failures.
-            set -E
-            trap err_trap ERR
-        fi
-        # The next line is what runs the component
-        "$@"
-        if [ $KEEP_GOING -eq 1 ]; then
-            trap - ERR
-            exit $last_failure_status
-        fi
-    )
-    component_status=$?
-    if [ $KEEP_GOING -eq 1 ]; then
-        set -e
-        if [ $component_status -ne 0 ]; then
-            failure_count=$((failure_count + 1))
-        fi
-    fi
-
-    # Restore the build tree to a clean state.
-    cleanup
-    unset current_component
-}
-
-# Preliminary setup
-pre_check_environment
-pre_initialize_variables
-pre_parse_command_line "$@"
-
-setup_quiet_wrappers
-pre_check_git
-pre_restore_files
-pre_back_up
-
-build_status=0
-if [ $KEEP_GOING -eq 1 ]; then
-    pre_setup_keep_going
-fi
-pre_prepare_outcome_file
-pre_print_configuration
-pre_check_tools
-cleanup
-if in_mbedtls_repo; then
-    pre_generate_files
-fi
-
-# Run the requested tests.
-for ((error_test_i=1; error_test_i <= error_test; error_test_i++)); do
-    run_component pseudo_component_error_test
-done
-unset error_test_i
-for component in $RUN_COMPONENTS; do
-    run_component "component_$component"
-done
-
-# We're done.
-post_report
+main "$@"
diff --git a/tests/scripts/analyze_outcomes.py b/tests/scripts/analyze_outcomes.py
index 188b68d..1f7e98c 100755
--- a/tests/scripts/analyze_outcomes.py
+++ b/tests/scripts/analyze_outcomes.py
@@ -6,287 +6,288 @@
 less likely to be useful.
 """
 
-import argparse
-import sys
-import traceback
 import re
-import subprocess
-import os
 import typing
 
-import check_test_cases
+import scripts_path # pylint: disable=unused-import
+from mbedtls_framework import outcome_analysis
 
 
-# `ComponentOutcomes` is a named tuple which is defined as:
-# ComponentOutcomes(
-#     successes = {
-#         "<suite_case>",
-#         ...
-#     },
-#     failures = {
-#         "<suite_case>",
-#         ...
-#     }
-# )
-# suite_case = "<suite>;<case>"
-ComponentOutcomes = typing.NamedTuple('ComponentOutcomes',
-                                      [('successes', typing.Set[str]),
-                                       ('failures', typing.Set[str])])
-
-# `Outcomes` is a representation of the outcomes file,
-# which defined as:
-# Outcomes = {
-#     "<component>": ComponentOutcomes,
-#     ...
-# }
-Outcomes = typing.Dict[str, ComponentOutcomes]
-
-
-class Results:
-    """Process analysis results."""
-
-    def __init__(self):
-        self.error_count = 0
-        self.warning_count = 0
-
-    def new_section(self, fmt, *args, **kwargs):
-        self._print_line('\n*** ' + fmt + ' ***\n', *args, **kwargs)
-
-    def info(self, fmt, *args, **kwargs):
-        self._print_line('Info: ' + fmt, *args, **kwargs)
-
-    def error(self, fmt, *args, **kwargs):
-        self.error_count += 1
-        self._print_line('Error: ' + fmt, *args, **kwargs)
-
-    def warning(self, fmt, *args, **kwargs):
-        self.warning_count += 1
-        self._print_line('Warning: ' + fmt, *args, **kwargs)
+class CoverageTask(outcome_analysis.CoverageTask):
+    """Justify test cases that are never executed."""
 
     @staticmethod
-    def _print_line(fmt, *args, **kwargs):
-        sys.stderr.write((fmt + '\n').format(*args, **kwargs))
+    def _has_word_re(words: typing.Iterable[str],
+                     exclude: typing.Optional[str] = None) -> typing.Pattern:
+        """Construct a regex that matches if any of the words appears.
 
-def execute_reference_driver_tests(results: Results, ref_component: str, driver_component: str, \
-                                   outcome_file: str) -> None:
-    """Run the tests specified in ref_component and driver_component. Results
-    are stored in the output_file and they will be used for the following
-    coverage analysis"""
-    results.new_section("Test {} and {}", ref_component, driver_component)
+        The occurrence must start and end at a word boundary.
 
-    shell_command = "tests/scripts/all.sh --outcome-file " + outcome_file + \
-                    " " + ref_component + " " + driver_component
-    results.info("Running: {}", shell_command)
-    ret_val = subprocess.run(shell_command.split(), check=False).returncode
-
-    if ret_val != 0:
-        results.error("failed to run reference/driver components")
-
-IgnoreEntry = typing.Union[str, typing.Pattern]
-
-def name_matches_pattern(name: str, str_or_re: IgnoreEntry) -> bool:
-    """Check if name matches a pattern, that may be a string or regex.
-    - If the pattern is a string, name must be equal to match.
-    - If the pattern is a regex, name must fully match.
-    """
-    # The CI's python is too old for re.Pattern
-    #if isinstance(str_or_re, re.Pattern):
-    if not isinstance(str_or_re, str):
-        return str_or_re.fullmatch(name) is not None
-    else:
-        return str_or_re == name
-
-def read_outcome_file(outcome_file: str) -> Outcomes:
-    """Parse an outcome file and return an outcome collection.
-    """
-    outcomes = {}
-    with open(outcome_file, 'r', encoding='utf-8') as input_file:
-        for line in input_file:
-            (_platform, component, suite, case, result, _cause) = line.split(';')
-            # Note that `component` is not unique. If a test case passes on Linux
-            # and fails on FreeBSD, it'll end up in both the successes set and
-            # the failures set.
-            suite_case = ';'.join([suite, case])
-            if component not in outcomes:
-                outcomes[component] = ComponentOutcomes(set(), set())
-            if result == 'PASS':
-                outcomes[component].successes.add(suite_case)
-            elif result == 'FAIL':
-                outcomes[component].failures.add(suite_case)
-
-    return outcomes
-
-
-class Task:
-    """Base class for outcome analysis tasks."""
-
-    # Override the following in child classes.
-    # Map test suite names (with the test_suite_prefix) to a list of ignored
-    # test cases. Each element in the list can be either a string or a regex;
-    # see the `name_matches_pattern` function.
-    IGNORED_TESTS = {} #type: typing.Dict[str, typing.List[IgnoreEntry]]
-
-    def __init__(self, options) -> None:
-        """Pass command line options to the tasks.
-
-        Each task decides which command line options it cares about.
+        If exclude is specified, strings containing a match for that
+        regular expression will not match the returned pattern.
         """
-        pass
+        exclude_clause = r''
+        if exclude:
+            exclude_clause = r'(?!.*' + exclude + ')'
+        return re.compile(exclude_clause +
+                          r'.*\b(?:' + r'|'.join(words) + r')\b.*',
+                          re.DOTALL)
 
-    def section_name(self) -> str:
-        """The section name to use in results."""
+    # generate_psa_tests.py generates test cases involving cryptographic
+    # mechanisms (key types, families, algorithms) that are declared but
+    # not implemented. Until we improve the Python scripts, ignore those
+    # test cases in the analysis.
+    # https://github.com/Mbed-TLS/mbedtls/issues/9572
+    _PSA_MECHANISMS_NOT_IMPLEMENTED = [
+        r'CBC_MAC',
+        r'DETERMINISTIC_DSA',
+        r'DET_DSA',
+        r'DSA',
+        r'ECC_KEY_PAIR\(BRAINPOOL_P_R1\) (?:160|192|224|320)-bit',
+        r'ECC_KEY_PAIR\(SECP_K1\) 225-bit',
+        r'ECC_PAIR\(BP_R1\) (?:160|192|224|320)-bit',
+        r'ECC_PAIR\(SECP_K1\) 225-bit',
+        r'ECC_PUBLIC_KEY\(BRAINPOOL_P_R1\) (?:160|192|224|320)-bit',
+        r'ECC_PUBLIC_KEY\(SECP_K1\) 225-bit',
+        r'ECC_PUB\(BP_R1\) (?:160|192|224|320)-bit',
+        r'ECC_PUB\(SECP_K1\) 225-bit',
+        r'ED25519PH',
+        r'ED448PH',
+        r'PEPPER',
+        r'PURE_EDDSA',
+        r'SECP_R2',
+        r'SECT_K1',
+        r'SECT_R1',
+        r'SECT_R2',
+        r'SHAKE256_512',
+        r'SHA_512_224',
+        r'SHA_512_256',
+        r'TWISTED_EDWARDS',
+        r'XTS',
+    ]
+    PSA_MECHANISM_NOT_IMPLEMENTED_SEARCH_RE = \
+        _has_word_re(_PSA_MECHANISMS_NOT_IMPLEMENTED)
 
-    def ignored_tests(self, test_suite: str) -> typing.Iterator[IgnoreEntry]:
-        """Generate the ignore list for the specified test suite."""
-        if test_suite in self.IGNORED_TESTS:
-            yield from self.IGNORED_TESTS[test_suite]
-        pos = test_suite.find('.')
-        if pos != -1:
-            base_test_suite = test_suite[:pos]
-            if base_test_suite in self.IGNORED_TESTS:
-                yield from self.IGNORED_TESTS[base_test_suite]
-
-    def is_test_case_ignored(self, test_suite: str, test_string: str) -> bool:
-        """Check if the specified test case is ignored."""
-        for str_or_re in self.ignored_tests(test_suite):
-            if name_matches_pattern(test_string, str_or_re):
-                return True
-        return False
-
-    def run(self, results: Results, outcomes: Outcomes):
-        """Run the analysis on the specified outcomes.
-
-        Signal errors via the results objects
-        """
-        raise NotImplementedError
-
-
-class CoverageTask(Task):
-    """Analyze test coverage."""
-
-    # Test cases whose suite and description are matched by an entry in
-    # IGNORED_TESTS are expected to be never executed.
-    # All other test cases are expected to be executed at least once.
     IGNORED_TESTS = {
+        'ssl-opt': [
+            # We don't run ssl-opt.sh with Valgrind on the CI because
+            # it's extremely slow. We don't intend to change this.
+            'DTLS client reconnect from same port: reconnect, nbio, valgrind',
+            # We don't have IPv6 in our CI environment.
+            # https://github.com/Mbed-TLS/mbedtls-test/issues/176
+            'DTLS cookie: enabled, IPv6',
+            # Disabled due to OpenSSL bug.
+            # https://github.com/openssl/openssl/issues/18887
+            'DTLS fragmenting: 3d, openssl client, DTLS 1.2',
+            # We don't run ssl-opt.sh with Valgrind on the CI because
+            # it's extremely slow. We don't intend to change this.
+            'DTLS fragmenting: proxy MTU: auto-reduction (with valgrind)',
+            # It seems that we don't run `ssl-opt.sh` with
+            # `MBEDTLS_USE_PSA_CRYPTO` enabled but `MBEDTLS_SSL_ASYNC_PRIVATE`
+            # disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9581
+            'Opaque key for server authentication: invalid key: decrypt with ECC key, no async',
+            'Opaque key for server authentication: invalid key: ecdh with RSA key, no async',
+        ],
+        'test_suite_config.mbedtls_boolean': [
+            # We never test with CBC/PKCS5/PKCS12 enabled but
+            # PKCS7 padding disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9580
+            'Config: !MBEDTLS_CIPHER_PADDING_PKCS7',
+            # https://github.com/Mbed-TLS/mbedtls/issues/9583
+            'Config: !MBEDTLS_ECP_NIST_OPTIM',
+            # MBEDTLS_ECP_NO_FALLBACK only affects builds using a partial
+            # alternative implementation of ECP arithmetic (with
+            # MBEDTLS_ECP_INTERNAL_ALT enabled). We don't test those builds.
+            # The configuration enumeration script skips xxx_ALT options
+            # but not MBEDTLS_ECP_NO_FALLBACK, so it appears in the report,
+            # but we don't care about it.
+            'Config: MBEDTLS_ECP_NO_FALLBACK',
+            # Missing coverage of test configurations.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9585
+            'Config: !MBEDTLS_SSL_DTLS_ANTI_REPLAY',
+            # Missing coverage of test configurations.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9585
+            'Config: !MBEDTLS_SSL_DTLS_HELLO_VERIFY',
+            # We don't run test_suite_config when we test this.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9586
+            'Config: !MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED',
+            # We only test multithreading with pthreads.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9584
+            'Config: !MBEDTLS_THREADING_PTHREAD',
+            # Built but not tested.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9587
+            'Config: MBEDTLS_AES_USE_HARDWARE_ONLY',
+            # Untested platform-specific optimizations.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9588
+            'Config: MBEDTLS_HAVE_SSE2',
+            # Obsolete configuration option, to be replaced by
+            # PSA entropy drivers.
+            # https://github.com/Mbed-TLS/mbedtls/issues/8150
+            'Config: MBEDTLS_NO_PLATFORM_ENTROPY',
+            # Untested aspect of the platform interface.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9589
+            'Config: MBEDTLS_PLATFORM_NO_STD_FUNCTIONS',
+            # In a client-server build, test_suite_config runs in the
+            # client configuration, so it will never report
+            # MBEDTLS_PSA_CRYPTO_SPM as enabled. That's ok.
+            'Config: MBEDTLS_PSA_CRYPTO_SPM',
+            # We don't test on armv8 yet.
+            'Config: MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT',
+            'Config: MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY',
+            'Config: MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY',
+            'Config: MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY',
+            # We don't run test_suite_config when we test this.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9586
+            'Config: MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND',
+        ],
+        'test_suite_config.psa_boolean': [
+            # We don't test with HMAC disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9591
+            'Config: !PSA_WANT_ALG_HMAC',
+            # The DERIVE key type is always enabled.
+            'Config: !PSA_WANT_KEY_TYPE_DERIVE',
+            # More granularity of key pair type enablement macros
+            # than we care to test.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9590
+            'Config: !PSA_WANT_KEY_TYPE_DH_KEY_PAIR_EXPORT',
+            'Config: !PSA_WANT_KEY_TYPE_DH_KEY_PAIR_GENERATE',
+            'Config: !PSA_WANT_KEY_TYPE_DH_KEY_PAIR_IMPORT',
+            # More granularity of key pair type enablement macros
+            # than we care to test.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9590
+            'Config: !PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT',
+            'Config: !PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT',
+            # We don't test with HMAC disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9591
+            'Config: !PSA_WANT_KEY_TYPE_HMAC',
+            # The PASSWORD key type is always enabled.
+            'Config: !PSA_WANT_KEY_TYPE_PASSWORD',
+            # The PASSWORD_HASH key type is always enabled.
+            'Config: !PSA_WANT_KEY_TYPE_PASSWORD_HASH',
+            # The RAW_DATA key type is always enabled.
+            'Config: !PSA_WANT_KEY_TYPE_RAW_DATA',
+            # More granularity of key pair type enablement macros
+            # than we care to test.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9590
+            'Config: !PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT',
+            'Config: !PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT',
+            # Algorithm declared but not supported.
+            'Config: PSA_WANT_ALG_CBC_MAC',
+            # Algorithm declared but not supported.
+            'Config: PSA_WANT_ALG_XTS',
+            # Family declared but not supported.
+            'Config: PSA_WANT_ECC_SECP_K1_224',
+            # More granularity of key pair type enablement macros
+            # than we care to test.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9590
+            'Config: PSA_WANT_KEY_TYPE_DH_KEY_PAIR_DERIVE',
+            'Config: PSA_WANT_KEY_TYPE_ECC_KEY_PAIR',
+            'Config: PSA_WANT_KEY_TYPE_RSA_KEY_PAIR',
+            'Config: PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_DERIVE',
+        ],
+        'test_suite_config.psa_combinations': [
+            # We don't test this unusual, but sensible configuration.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9592
+            'Config: PSA_WANT_ALG_DETERMINSTIC_ECDSA without PSA_WANT_ALG_ECDSA',
+        ],
+        'test_suite_pkcs12': [
+            # We never test with CBC/PKCS5/PKCS12 enabled but
+            # PKCS7 padding disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9580
+            'PBE Decrypt, (Invalid padding & PKCS7 padding disabled)',
+            'PBE Encrypt, pad = 8 (PKCS7 padding disabled)',
+        ],
+        'test_suite_pkcs5': [
+            # We never test with CBC/PKCS5/PKCS12 enabled but
+            # PKCS7 padding disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9580
+            'PBES2 Decrypt (Invalid padding & PKCS7 padding disabled)',
+            'PBES2 Encrypt, pad=6 (PKCS7 padding disabled)',
+            'PBES2 Encrypt, pad=8 (PKCS7 padding disabled)',
+        ],
+        'test_suite_psa_crypto_generate_key.generated': [
+            # Ignore mechanisms that are not implemented, except
+            # for public keys for which we always test that
+            # psa_generate_key() returns PSA_ERROR_INVALID_ARGUMENT
+            # regardless of whether the specific key type is supported.
+            _has_word_re((mech
+                          for mech in _PSA_MECHANISMS_NOT_IMPLEMENTED
+                          if not mech.startswith('ECC_PUB')),
+                         exclude=r'ECC_PUB'),
+        ],
         'test_suite_psa_crypto_metadata': [
-            # Algorithm not supported yet
+            # Algorithms declared but not supported.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9579
+            'Asymmetric signature: Ed25519ph',
+            'Asymmetric signature: Ed448ph',
             'Asymmetric signature: pure EdDSA',
-            # Algorithm not supported yet
             'Cipher: XTS',
+            'MAC: CBC_MAC-3DES',
+            'MAC: CBC_MAC-AES-128',
+            'MAC: CBC_MAC-AES-192',
+            'MAC: CBC_MAC-AES-256',
+        ],
+        'test_suite_psa_crypto_not_supported.generated': [
+            # It is a bug that not-supported test cases aren't getting
+            # run for never-implemented key types.
+            # https://github.com/Mbed-TLS/mbedtls/issues/7915
+            PSA_MECHANISM_NOT_IMPLEMENTED_SEARCH_RE,
+            # We never test with DH key support disabled but support
+            # for a DH group enabled. The dependencies of these test
+            # cases don't really make sense.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9574
+            re.compile(r'PSA \w+ DH_.*type not supported'),
+            # We only test partial support for DH with the 2048-bit group
+            # enabled and the other groups disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9575
+            'PSA generate DH_KEY_PAIR(RFC7919) 2048-bit group not supported',
+            'PSA import DH_KEY_PAIR(RFC7919) 2048-bit group not supported',
+            'PSA import DH_PUBLIC_KEY(RFC7919) 2048-bit group not supported',
+        ],
+        'test_suite_psa_crypto_op_fail.generated': [
+            # Ignore mechanisms that are not implemented, except
+            # for test cases that assume the mechanism is not supported.
+            _has_word_re(_PSA_MECHANISMS_NOT_IMPLEMENTED,
+                         exclude=(r'.*: !(?:' +
+                                  r'|'.join(_PSA_MECHANISMS_NOT_IMPLEMENTED) +
+                                  r')\b')),
+            # Incorrect dependency generation. To be fixed as part of the
+            # resolution of https://github.com/Mbed-TLS/mbedtls/issues/9167
+            # by forward-porting the commit
+            # "PSA test case generation: dependency inference class: operation fail"
+            # from https://github.com/Mbed-TLS/mbedtls/pull/9025 .
+            re.compile(r'.* with (?:DH|ECC)_(?:KEY_PAIR|PUBLIC_KEY)\(.*'),
+            # PBKDF2_HMAC is not in the default configuration, so we don't
+            # enable it in depends.py where we remove hashes.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9576
+            re.compile(r'PSA key_derivation PBKDF2_HMAC\(\w+\): !(?!PBKDF2_HMAC\Z).*'),
+
+            # We never test with the HMAC algorithm enabled but the HMAC
+            # key type disabled. Those dependencies don't really make sense.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9573
+            re.compile(r'.* !HMAC with HMAC'),
+            # There's something wrong with PSA_WANT_ALG_RSA_PSS_ANY_SALT
+            # differing from PSA_WANT_ALG_RSA_PSS.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9578
+            re.compile(r'PSA sign RSA_PSS_ANY_SALT.*!(?:MD|RIPEMD|SHA).*'),
+        ],
+        'test_suite_psa_crypto_storage_format.current': [
+            PSA_MECHANISM_NOT_IMPLEMENTED_SEARCH_RE,
+        ],
+        'test_suite_psa_crypto_storage_format.v0': [
+            PSA_MECHANISM_NOT_IMPLEMENTED_SEARCH_RE,
+        ],
+        'tls13-misc': [
+            # Disabled due to OpenSSL bug.
+            # https://github.com/openssl/openssl/issues/10714
+            'TLS 1.3 O->m: resumption',
+            # Disabled due to OpenSSL command line limitation.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9582
+            'TLS 1.3 m->O: resumption with early data',
         ],
     }
 
-    def __init__(self, options) -> None:
-        super().__init__(options)
-        self.full_coverage = options.full_coverage #type: bool
-
-    @staticmethod
-    def section_name() -> str:
-        return "Analyze coverage"
-
-    def run(self, results: Results, outcomes: Outcomes) -> None:
-        """Check that all available test cases are executed at least once."""
-        # Make sure that the generated data files are present (and up-to-date).
-        # This allows analyze_outcomes.py to run correctly on a fresh Git
-        # checkout.
-        cp = subprocess.run(['make', 'generated_files'],
-                            cwd='tests',
-                            stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
-                            check=False)
-        if cp.returncode != 0:
-            sys.stderr.write(cp.stdout.decode('utf-8'))
-            results.error("Failed \"make generated_files\" in tests. "
-                          "Coverage analysis may be incorrect.")
-        available = check_test_cases.collect_available_test_cases()
-        for suite_case in available:
-            hit = any(suite_case in comp_outcomes.successes or
-                      suite_case in comp_outcomes.failures
-                      for comp_outcomes in outcomes.values())
-            (test_suite, test_description) = suite_case.split(';')
-            ignored = self.is_test_case_ignored(test_suite, test_description)
-
-            if not hit and not ignored:
-                if self.full_coverage:
-                    results.error('Test case not executed: {}', suite_case)
-                else:
-                    results.warning('Test case not executed: {}', suite_case)
-            elif hit and ignored:
-                # If a test case is no longer always skipped, we should remove
-                # it from the ignore list.
-                if self.full_coverage:
-                    results.error('Test case was executed but marked as ignored for coverage: {}',
-                                  suite_case)
-                else:
-                    results.warning('Test case was executed but marked as ignored for coverage: {}',
-                                    suite_case)
-
-
-class DriverVSReference(Task):
-    """Compare outcomes from testing with and without a driver.
-
-    There are 2 options to use analyze_driver_vs_reference_xxx locally:
-    1. Run tests and then analysis:
-      - tests/scripts/all.sh --outcome-file "$PWD/out.csv" <component_ref> <component_driver>
-      - tests/scripts/analyze_outcomes.py out.csv analyze_driver_vs_reference_xxx
-    2. Let this script run both automatically:
-      - tests/scripts/analyze_outcomes.py out.csv analyze_driver_vs_reference_xxx
-    """
-
-    # Override the following in child classes.
-    # Configuration name (all.sh component) used as the reference.
-    REFERENCE = ''
-    # Configuration name (all.sh component) used as the driver.
-    DRIVER = ''
-    # Ignored test suites (without the test_suite_ prefix).
-    IGNORED_SUITES = [] #type: typing.List[str]
-
-    def __init__(self, options) -> None:
-        super().__init__(options)
-        self.ignored_suites = frozenset('test_suite_' + x
-                                        for x in self.IGNORED_SUITES)
-
-    def section_name(self) -> str:
-        return f"Analyze driver {self.DRIVER} vs reference {self.REFERENCE}"
-
-    def run(self, results: Results, outcomes: Outcomes) -> None:
-        """Check that all tests passing in the driver component are also
-        passing in the corresponding reference component.
-        Skip:
-        - full test suites provided in ignored_suites list
-        - only some specific test inside a test suite, for which the corresponding
-          output string is provided
-        """
-        ref_outcomes = outcomes.get("component_" + self.REFERENCE)
-        driver_outcomes = outcomes.get("component_" + self.DRIVER)
-
-        if ref_outcomes is None or driver_outcomes is None:
-            results.error("required components are missing: bad outcome file?")
-            return
-
-        if not ref_outcomes.successes:
-            results.error("no passing test in reference component: bad outcome file?")
-            return
-
-        for suite_case in ref_outcomes.successes:
-            # suite_case is like "test_suite_foo.bar;Description of test case"
-            (full_test_suite, test_string) = suite_case.split(';')
-            test_suite = full_test_suite.split('.')[0] # retrieve main part of test suite name
-
-            # Immediately skip fully-ignored test suites
-            if test_suite in self.ignored_suites or \
-               full_test_suite in self.ignored_suites:
-                continue
-
-            # For ignored test cases inside test suites, just remember and:
-            # don't issue an error if they're skipped with drivers,
-            # but issue an error if they're not (means we have a bad entry).
-            ignored = self.is_test_case_ignored(full_test_suite, test_string)
-
-            if not ignored and not suite_case in driver_outcomes.successes:
-                results.error("SKIP/FAIL -> PASS: {}", suite_case)
-            if ignored and suite_case in driver_outcomes.successes:
-                results.error("uselessly ignored: {}", suite_case)
-
 
 # The names that we give to classes derived from DriverVSReference do not
 # follow the usual naming convention, because it's more readable to use
@@ -295,7 +296,7 @@
 # documentation.
 #pylint: disable=invalid-name,missing-class-docstring
 
-class DriverVSReference_hash(DriverVSReference):
+class DriverVSReference_hash(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_psa_crypto_config_reference_hash_use_psa'
     DRIVER = 'test_psa_crypto_config_accel_hash_use_psa'
     IGNORED_SUITES = [
@@ -315,7 +316,7 @@
         ],
     }
 
-class DriverVSReference_hmac(DriverVSReference):
+class DriverVSReference_hmac(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_psa_crypto_config_reference_hmac'
     DRIVER = 'test_psa_crypto_config_accel_hmac'
     IGNORED_SUITES = [
@@ -354,7 +355,7 @@
         ],
     }
 
-class DriverVSReference_cipher_aead_cmac(DriverVSReference):
+class DriverVSReference_cipher_aead_cmac(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_psa_crypto_config_reference_cipher_aead_cmac'
     DRIVER = 'test_psa_crypto_config_accel_cipher_aead_cmac'
     # Modules replaced by drivers.
@@ -421,7 +422,7 @@
         ],
     }
 
-class DriverVSReference_ecp_light_only(DriverVSReference):
+class DriverVSReference_ecp_light_only(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_psa_crypto_config_reference_ecc_ecp_light_only'
     DRIVER = 'test_psa_crypto_config_accel_ecc_ecp_light_only'
     IGNORED_SUITES = [
@@ -461,7 +462,7 @@
         ],
     }
 
-class DriverVSReference_no_ecp_at_all(DriverVSReference):
+class DriverVSReference_no_ecp_at_all(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_psa_crypto_config_reference_ecc_no_ecp_at_all'
     DRIVER = 'test_psa_crypto_config_accel_ecc_no_ecp_at_all'
     IGNORED_SUITES = [
@@ -499,7 +500,7 @@
         ],
     }
 
-class DriverVSReference_ecc_no_bignum(DriverVSReference):
+class DriverVSReference_ecc_no_bignum(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_psa_crypto_config_reference_ecc_no_bignum'
     DRIVER = 'test_psa_crypto_config_accel_ecc_no_bignum'
     IGNORED_SUITES = [
@@ -544,7 +545,7 @@
         ],
     }
 
-class DriverVSReference_ecc_ffdh_no_bignum(DriverVSReference):
+class DriverVSReference_ecc_ffdh_no_bignum(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_psa_crypto_config_reference_ecc_ffdh_no_bignum'
     DRIVER = 'test_psa_crypto_config_accel_ecc_ffdh_no_bignum'
     IGNORED_SUITES = [
@@ -597,7 +598,7 @@
         ],
     }
 
-class DriverVSReference_ffdh_alg(DriverVSReference):
+class DriverVSReference_ffdh_alg(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_psa_crypto_config_reference_ffdh'
     DRIVER = 'test_psa_crypto_config_accel_ffdh'
     IGNORED_SUITES = ['dhm']
@@ -613,7 +614,7 @@
         ],
     }
 
-class DriverVSReference_tfm_config(DriverVSReference):
+class DriverVSReference_tfm_config(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_tfm_config_no_p256m'
     DRIVER = 'test_tfm_config_p256m_driver_accel_ec'
     IGNORED_SUITES = [
@@ -645,7 +646,7 @@
         ],
     }
 
-class DriverVSReference_rsa(DriverVSReference):
+class DriverVSReference_rsa(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_psa_crypto_config_reference_rsa_crypto'
     DRIVER = 'test_psa_crypto_config_accel_rsa_crypto'
     IGNORED_SUITES = [
@@ -684,7 +685,7 @@
         ],
     }
 
-class DriverVSReference_block_cipher_dispatch(DriverVSReference):
+class DriverVSReference_block_cipher_dispatch(outcome_analysis.DriverVSReference):
     REFERENCE = 'test_full_block_cipher_legacy_dispatch'
     DRIVER = 'test_full_block_cipher_psa_dispatch'
     IGNORED_SUITES = [
@@ -751,7 +752,6 @@
 #pylint: enable=invalid-name,missing-class-docstring
 
 
-
 # List of tasks with a function that can handle this task and additional arguments if required
 KNOWN_TASKS = {
     'analyze_coverage': CoverageTask,
@@ -768,77 +768,5 @@
     'analyze_block_cipher_dispatch': DriverVSReference_block_cipher_dispatch,
 }
 
-
-def main():
-    main_results = Results()
-
-    try:
-        parser = argparse.ArgumentParser(description=__doc__)
-        parser.add_argument('outcomes', metavar='OUTCOMES.CSV',
-                            help='Outcome file to analyze')
-        parser.add_argument('specified_tasks', default='all', nargs='?',
-                            help='Analysis to be done. By default, run all tasks. '
-                                 'With one or more TASK, run only those. '
-                                 'TASK can be the name of a single task or '
-                                 'comma/space-separated list of tasks. ')
-        parser.add_argument('--list', action='store_true',
-                            help='List all available tasks and exit.')
-        parser.add_argument('--require-full-coverage', action='store_true',
-                            dest='full_coverage', help="Require all available "
-                            "test cases to be executed and issue an error "
-                            "otherwise. This flag is ignored if 'task' is "
-                            "neither 'all' nor 'analyze_coverage'")
-        options = parser.parse_args()
-
-        if options.list:
-            for task in KNOWN_TASKS:
-                print(task)
-            sys.exit(0)
-
-        if options.specified_tasks == 'all':
-            tasks_list = KNOWN_TASKS.keys()
-        else:
-            tasks_list = re.split(r'[, ]+', options.specified_tasks)
-            for task in tasks_list:
-                if task not in KNOWN_TASKS:
-                    sys.stderr.write('invalid task: {}\n'.format(task))
-                    sys.exit(2)
-
-        # If the outcome file exists, parse it once and share the result
-        # among tasks to improve performance.
-        # Otherwise, it will be generated by execute_reference_driver_tests.
-        if not os.path.exists(options.outcomes):
-            if len(tasks_list) > 1:
-                sys.stderr.write("mutiple tasks found, please provide a valid outcomes file.\n")
-                sys.exit(2)
-
-            task_name = tasks_list[0]
-            task = KNOWN_TASKS[task_name]
-            if not issubclass(task, DriverVSReference):
-                sys.stderr.write("please provide valid outcomes file for {}.\n".format(task_name))
-                sys.exit(2)
-            execute_reference_driver_tests(main_results,
-                                           task.REFERENCE,
-                                           task.DRIVER,
-                                           options.outcomes)
-
-        outcomes = read_outcome_file(options.outcomes)
-
-        for task_name in tasks_list:
-            task_constructor = KNOWN_TASKS[task_name]
-            task = task_constructor(options)
-            main_results.new_section(task.section_name())
-            task.run(main_results, outcomes)
-
-        main_results.info("Overall results: {} warnings and {} errors",
-                          main_results.warning_count, main_results.error_count)
-
-        sys.exit(0 if (main_results.error_count == 0) else 1)
-
-    except Exception: # pylint: disable=broad-except
-        # Print the backtrace and exit explicitly with our chosen status.
-        traceback.print_exc()
-        sys.exit(120)
-
 if __name__ == '__main__':
-    main()
+    outcome_analysis.main(KNOWN_TASKS)
diff --git a/tests/scripts/check-generated-files.sh b/tests/scripts/check-generated-files.sh
index 2060b9c..b480000 100755
--- a/tests/scripts/check-generated-files.sh
+++ b/tests/scripts/check-generated-files.sh
@@ -140,8 +140,8 @@
     check scripts/generate_errors.pl library/error.c
     check scripts/generate_query_config.pl programs/test/query_config.c
     check scripts/generate_features.pl library/version_features.c
-    check scripts/generate_ssl_debug_helpers.py library/ssl_debug_helpers_generated.c
-    check tests/scripts/generate_tls13_compat_tests.py tests/opt-testcases/tls13-compat.sh
+    check framework/scripts/generate_ssl_debug_helpers.py library/ssl_debug_helpers_generated.c
+    check framework/scripts/generate_tls13_compat_tests.py tests/opt-testcases/tls13-compat.sh
     check framework/scripts/generate_test_cert_macros.py tests/src/test_certs.h
     # generate_visualc_files enumerates source files (library/*.c). It doesn't
     # care about their content, but the files must exist. So it must run after
diff --git a/tests/scripts/check_test_cases.py b/tests/scripts/check_test_cases.py
deleted file mode 100755
index d67e678..0000000
--- a/tests/scripts/check_test_cases.py
+++ /dev/null
@@ -1,241 +0,0 @@
-#!/usr/bin/env python3
-
-"""Sanity checks for test data.
-
-This program contains a class for traversing test cases that can be used
-independently of the checks.
-"""
-
-# Copyright The Mbed TLS Contributors
-# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
-
-import argparse
-import glob
-import os
-import re
-import subprocess
-import sys
-
-class ScriptOutputError(ValueError):
-    """A kind of ValueError that indicates we found
-    the script doesn't list test cases in an expected
-    pattern.
-    """
-
-    @property
-    def script_name(self):
-        return super().args[0]
-
-    @property
-    def idx(self):
-        return super().args[1]
-
-    @property
-    def line(self):
-        return super().args[2]
-
-class Results:
-    """Store file and line information about errors or warnings in test suites."""
-
-    def __init__(self, options):
-        self.errors = 0
-        self.warnings = 0
-        self.ignore_warnings = options.quiet
-
-    def error(self, file_name, line_number, fmt, *args):
-        sys.stderr.write(('{}:{}:ERROR:' + fmt + '\n').
-                         format(file_name, line_number, *args))
-        self.errors += 1
-
-    def warning(self, file_name, line_number, fmt, *args):
-        if not self.ignore_warnings:
-            sys.stderr.write(('{}:{}:Warning:' + fmt + '\n')
-                             .format(file_name, line_number, *args))
-            self.warnings += 1
-
-class TestDescriptionExplorer:
-    """An iterator over test cases with descriptions.
-
-The test cases that have descriptions are:
-* Individual unit tests (entries in a .data file) in test suites.
-* Individual test cases in ssl-opt.sh.
-
-This is an abstract class. To use it, derive a class that implements
-the process_test_case method, and call walk_all().
-"""
-
-    def process_test_case(self, per_file_state,
-                          file_name, line_number, description):
-        """Process a test case.
-
-per_file_state: an object created by new_per_file_state() at the beginning
-                of each file.
-file_name: a relative path to the file containing the test case.
-line_number: the line number in the given file.
-description: the test case description as a byte string.
-"""
-        raise NotImplementedError
-
-    def new_per_file_state(self):
-        """Return a new per-file state object.
-
-The default per-file state object is None. Child classes that require per-file
-state may override this method.
-"""
-        #pylint: disable=no-self-use
-        return None
-
-    def walk_test_suite(self, data_file_name):
-        """Iterate over the test cases in the given unit test data file."""
-        in_paragraph = False
-        descriptions = self.new_per_file_state() # pylint: disable=assignment-from-none
-        with open(data_file_name, 'rb') as data_file:
-            for line_number, line in enumerate(data_file, 1):
-                line = line.rstrip(b'\r\n')
-                if not line:
-                    in_paragraph = False
-                    continue
-                if line.startswith(b'#'):
-                    continue
-                if not in_paragraph:
-                    # This is a test case description line.
-                    self.process_test_case(descriptions,
-                                           data_file_name, line_number, line)
-                in_paragraph = True
-
-    def collect_from_script(self, script_name):
-        """Collect the test cases in a script by calling its listing test cases
-option"""
-        descriptions = self.new_per_file_state() # pylint: disable=assignment-from-none
-        listed = subprocess.check_output(['sh', script_name, '--list-test-cases'])
-        # Assume test file is responsible for printing identical format of
-        # test case description between --list-test-cases and its OUTCOME.CSV
-        #
-        # idx indicates the number of test case since there is no line number
-        # in the script for each test case.
-        for idx, line in enumerate(listed.splitlines()):
-            # We are expecting the script to list the test cases in
-            # `<suite_name>;<description>` pattern.
-            script_outputs = line.split(b';', 1)
-            if len(script_outputs) == 2:
-                suite_name, description = script_outputs
-            else:
-                raise ScriptOutputError(script_name, idx, line.decode("utf-8"))
-
-            self.process_test_case(descriptions,
-                                   suite_name.decode('utf-8'),
-                                   idx,
-                                   description.rstrip())
-
-    @staticmethod
-    def collect_test_directories():
-        """Get the relative path for the TLS and Crypto test directories."""
-        if os.path.isdir('tests'):
-            tests_dir = 'tests'
-        elif os.path.isdir('suites'):
-            tests_dir = '.'
-        elif os.path.isdir('../suites'):
-            tests_dir = '..'
-        directories = [tests_dir]
-        return directories
-
-    def walk_all(self):
-        """Iterate over all named test cases."""
-        test_directories = self.collect_test_directories()
-        for directory in test_directories:
-            for data_file_name in glob.glob(os.path.join(directory, 'suites',
-                                                         '*.data')):
-                self.walk_test_suite(data_file_name)
-
-            for sh_file in ['ssl-opt.sh', 'compat.sh']:
-                sh_file = os.path.join(directory, sh_file)
-                self.collect_from_script(sh_file)
-
-class TestDescriptions(TestDescriptionExplorer):
-    """Collect the available test cases."""
-
-    def __init__(self):
-        super().__init__()
-        self.descriptions = set()
-
-    def process_test_case(self, _per_file_state,
-                          file_name, _line_number, description):
-        """Record an available test case."""
-        base_name = re.sub(r'\.[^.]*$', '', re.sub(r'.*/', '', file_name))
-        key = ';'.join([base_name, description.decode('utf-8')])
-        self.descriptions.add(key)
-
-def collect_available_test_cases():
-    """Collect the available test cases."""
-    explorer = TestDescriptions()
-    explorer.walk_all()
-    return sorted(explorer.descriptions)
-
-class DescriptionChecker(TestDescriptionExplorer):
-    """Check all test case descriptions.
-
-* Check that each description is valid (length, allowed character set, etc.).
-* Check that there is no duplicated description inside of one test suite.
-"""
-
-    def __init__(self, results):
-        self.results = results
-
-    def new_per_file_state(self):
-        """Dictionary mapping descriptions to their line number."""
-        return {}
-
-    def process_test_case(self, per_file_state,
-                          file_name, line_number, description):
-        """Check test case descriptions for errors."""
-        results = self.results
-        seen = per_file_state
-        if description in seen:
-            results.error(file_name, line_number,
-                          'Duplicate description (also line {})',
-                          seen[description])
-            return
-        if re.search(br'[\t;]', description):
-            results.error(file_name, line_number,
-                          'Forbidden character \'{}\' in description',
-                          re.search(br'[\t;]', description).group(0).decode('ascii'))
-        if re.search(br'[^ -~]', description):
-            results.error(file_name, line_number,
-                          'Non-ASCII character in description')
-        if len(description) > 66:
-            results.warning(file_name, line_number,
-                            'Test description too long ({} > 66)',
-                            len(description))
-        seen[description] = line_number
-
-def main():
-    parser = argparse.ArgumentParser(description=__doc__)
-    parser.add_argument('--list-all',
-                        action='store_true',
-                        help='List all test cases, without doing checks')
-    parser.add_argument('--quiet', '-q',
-                        action='store_true',
-                        help='Hide warnings')
-    parser.add_argument('--verbose', '-v',
-                        action='store_false', dest='quiet',
-                        help='Show warnings (default: on; undoes --quiet)')
-    options = parser.parse_args()
-    if options.list_all:
-        descriptions = collect_available_test_cases()
-        sys.stdout.write('\n'.join(descriptions + ['']))
-        return
-    results = Results(options)
-    checker = DescriptionChecker(results)
-    try:
-        checker.walk_all()
-    except ScriptOutputError as e:
-        results.error(e.script_name, e.idx,
-                      '"{}" should be listed as "<suite_name>;<description>"',
-                      e.line)
-    if (results.warnings or results.errors) and not options.quiet:
-        sys.stderr.write('{}: {} errors, {} warnings\n'
-                         .format(sys.argv[0], results.errors, results.warnings))
-    sys.exit(1 if results.errors else 0)
-
-if __name__ == '__main__':
-    main()
diff --git a/tests/scripts/components-basic-checks.sh b/tests/scripts/components-basic-checks.sh
index 053aacf..7b60b49 100644
--- a/tests/scripts/components-basic-checks.sh
+++ b/tests/scripts/components-basic-checks.sh
@@ -68,7 +68,7 @@
     else
         opt=''
     fi
-    tests/scripts/check_test_cases.py -q $opt
+    framework/scripts/check_test_cases.py -q $opt
     unset opt
 }
 
@@ -106,6 +106,9 @@
     # the test code and that's probably the most convenient way of achieving
     # the test's goal.
     echo "MBEDTLS_ASN1_WRITE_C" >> $expected
+    # No PSA equivalent - used in test_suite_psa_crypto to get some "known" size
+    # for raw key generation.
+    echo "MBEDTLS_CTR_DRBG_MAX_REQUEST" >> $expected
     # No PSA equivalent - we should probably have one in the future.
     echo "MBEDTLS_ECP_RESTARTABLE" >> $expected
     # No PSA equivalent - needed by some init tests
@@ -157,6 +160,5 @@
     ./framework/scripts/test_generate_test_code.py 2>&1
 
     msg "unit test: translate_ciphers.py"
-    python3 -m unittest tests/scripts/translate_ciphers.py 2>&1
+    python3 -m unittest framework/scripts/translate_ciphers.py 2>&1
 }
-
diff --git a/tests/scripts/components-compiler.sh b/tests/scripts/components-compiler.sh
index 5badabb..5d22735 100644
--- a/tests/scripts/components-compiler.sh
+++ b/tests/scripts/components-compiler.sh
@@ -18,7 +18,7 @@
     cp configs/config-tfm.h "$CONFIG_H"
 
     msg "build: TF-M config, armclang armv7-m thumb2"
-    armc6_build_test "--target=arm-arm-none-eabi -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe"
+    helper_armc6_build_test "--target=arm-arm-none-eabi -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe"
 }
 
 test_build_opt () {
@@ -56,7 +56,7 @@
 
 component_test_clang_earliest_opt () {
     scripts/config.py full
-    test_build_opt 'full config' "$CLANG_EARLIEST" -O0
+    test_build_opt 'full config' "$CLANG_EARLIEST" -O2
 }
 
 support_test_clang_earliest_opt () {
@@ -74,7 +74,7 @@
 
 component_test_gcc_earliest_opt () {
     scripts/config.py full
-    test_build_opt 'full config' "$GCC_EARLIEST" -O0
+    test_build_opt 'full config' "$GCC_EARLIEST" -O2
 }
 
 support_test_gcc_earliest_opt () {
@@ -83,20 +83,20 @@
 
 component_build_mingw () {
     msg "build: Windows cross build - mingw64, make (Link Library)" # ~ 30s
-    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 lib programs
+    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 lib programs
 
     # note Make tests only builds the tests, but doesn't run them
-    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -maes -msse2 -mpclmul' WINDOWS_BUILD=1 tests
+    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar CFLAGS='-Werror -maes -msse2 -mpclmul' WINDOWS_BUILD=1 tests
     make WINDOWS_BUILD=1 clean
 
     msg "build: Windows cross build - mingw64, make (DLL)" # ~ 30s
-    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 SHARED=1 lib programs
-    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 SHARED=1 tests
+    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 SHARED=1 lib programs
+    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 SHARED=1 tests
     make WINDOWS_BUILD=1 clean
 
     msg "build: Windows cross build - mingw64, make (Library only, default config without MBEDTLS_AESNI_C)" # ~ 30s
     ./scripts/config.py unset MBEDTLS_AESNI_C #
-    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 lib
+    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 lib
     make WINDOWS_BUILD=1 clean
 }
 
diff --git a/tests/scripts/components-configuration-crypto.sh b/tests/scripts/components-configuration-crypto.sh
index d2f7c22..c9ec333 100644
--- a/tests/scripts/components-configuration-crypto.sh
+++ b/tests/scripts/components-configuration-crypto.sh
@@ -31,6 +31,25 @@
     make test
 }
 
+component_test_crypto_with_static_key_slots() {
+    msg "build: crypto full + MBEDTLS_PSA_STATIC_KEY_SLOTS"
+    scripts/config.py crypto_full
+    scripts/config.py set MBEDTLS_PSA_STATIC_KEY_SLOTS
+    # Intentionally set MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE to a value that
+    # is enough to contain:
+    # - all RSA public keys up to 4096 bits (max of PSA_VENDOR_RSA_MAX_KEY_BITS).
+    # - RSA key pairs up to 1024 bits, but not 2048 or larger.
+    # - all FFDH key pairs and public keys up to 8192 bits (max of PSA_VENDOR_FFDH_MAX_KEY_BITS).
+    # - all EC key pairs and public keys up to 521 bits (max of PSA_VENDOR_ECC_MAX_CURVE_BITS).
+    scripts/config.py set MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE 1212
+    # Disable the fully dynamic key store (default on) since it conflicts
+    # with the static behavior that we're testing here.
+    scripts/config.py unset MBEDTLS_PSA_KEY_STORE_DYNAMIC
+
+    msg "test: crypto full + MBEDTLS_PSA_STATIC_KEY_SLOTS"
+    make CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" test
+}
+
 # check_renamed_symbols HEADER LIB
 # Check that if HEADER contains '#define MACRO ...' then MACRO is not a symbol
 # name in LIB.
@@ -56,6 +75,68 @@
     check_renamed_symbols tests/include/spe/crypto_spe.h library/libmbedcrypto.a
 }
 
+# The goal of this component is to build a configuration where:
+# - test code and libtestdriver1 can make use of calloc/free and
+# - core library (including PSA core) cannot use calloc/free.
+component_test_psa_crypto_without_heap() {
+    msg "crypto without heap: build libtestdriver1"
+    # Disable PSA features that cannot be accelerated and whose builtin support
+    # requires calloc/free.
+    scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
+    scripts/config.py -f $CRYPTO_CONFIG_H unset-all "^PSA_WANT_ALG_HKDF"
+    scripts/config.py -f $CRYPTO_CONFIG_H unset-all "^PSA_WANT_ALG_PBKDF2_"
+    scripts/config.py -f $CRYPTO_CONFIG_H unset-all "^PSA_WANT_ALG_TLS12_"
+    # RSA key support requires ASN1 parse/write support for testing, but ASN1
+    # is disabled below.
+    scripts/config.py -f $CRYPTO_CONFIG_H unset-all "^PSA_WANT_KEY_TYPE_RSA_"
+    scripts/config.py -f $CRYPTO_CONFIG_H unset-all "^PSA_WANT_ALG_RSA_"
+    # DES requires built-in support for key generation (parity check) so it
+    # cannot be accelerated
+    scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_KEY_TYPE_DES
+    # EC-JPAKE use calloc/free in PSA core
+    scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_JPAKE
+
+    # Accelerate all PSA features (which are still enabled in CRYPTO_CONFIG_H).
+    PSA_SYM_LIST=$(./scripts/config.py -f $CRYPTO_CONFIG_H get-all-enabled PSA_WANT)
+    loc_accel_list=$(echo $PSA_SYM_LIST | sed 's/PSA_WANT_//g')
+
+    helper_libtestdriver1_adjust_config crypto
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    msg "crypto without heap: build main library"
+    # Disable all legacy MBEDTLS_xxx symbols.
+    scripts/config.py unset-all "^MBEDTLS_"
+    # Build the PSA core using the proper config file.
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_C
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
+    # Enable fully-static key slots in PSA core.
+    scripts/config.py set MBEDTLS_PSA_STATIC_KEY_SLOTS
+    # Prevent PSA core from creating a copy of input/output buffers.
+    scripts/config.py set MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS
+    # Prevent PSA core from using CTR-DRBG or HMAC-DRBG for random generation.
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
+    # Set calloc/free as null pointer functions. Calling them would crash
+    # the program so we can use this as a "sentinel" for being sure no module
+    # is making use of these functions in the library.
+    scripts/config.py set MBEDTLS_PLATFORM_C
+    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
+    scripts/config.py set MBEDTLS_PLATFORM_STD_CALLOC   NULL
+    scripts/config.py set MBEDTLS_PLATFORM_STD_FREE     NULL
+
+    helper_libtestdriver1_make_main "$loc_accel_list" lib
+
+    msg "crypto without heap: build test suites and helpers"
+    # Reset calloc/free functions to normal operations so that test code can
+    # freely use them.
+    scripts/config.py unset MBEDTLS_PLATFORM_MEMORY
+    scripts/config.py unset MBEDTLS_PLATFORM_STD_CALLOC
+    scripts/config.py unset MBEDTLS_PLATFORM_STD_FREE
+    helper_libtestdriver1_make_main "$loc_accel_list" tests
+
+    msg "crypto without heap: test"
+    make test
+}
+
 # Get a list of library-wise undefined symbols and ensure that they only
 # belong to psa_xxx() functions and not to mbedtls_yyy() ones.
 # This function is a common helper used by both:
@@ -2393,7 +2474,7 @@
     helper_libtestdriver1_make_main "$loc_accel_list"
 
     # Make sure this was not re-enabled by accident (additive config)
-    not grep mbedtls_des* library/des.o
+    not grep mbedtls_des library/des.o
 
     # Run the tests
     # -------------
@@ -2849,12 +2930,12 @@
     msg "AESCE, build with default configuration."
     scripts/config.py set MBEDTLS_AESCE_C
     scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
+    helper_armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
 
     msg "AESCE, build AESCE only"
     scripts/config.py set MBEDTLS_AESCE_C
     scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
+    helper_armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
 }
 
 support_build_aes_aesce_armcc () {
@@ -3084,7 +3165,7 @@
     # test AESCE baremetal build
     scripts/config.py set MBEDTLS_AESCE_C
     msg "build: default config + BLOCK_CIPHER_NO_DECRYPT with AESCE"
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto -Werror -Wall -Wextra"
+    helper_armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto -Werror -Wall -Wextra"
 
     # Make sure we don't have mbedtls_xxx_setkey_dec in AES/ARIA/CAMELLIA
     not grep mbedtls_aes_setkey_dec library/aes.o
diff --git a/tests/scripts/components-platform.sh b/tests/scripts/components-platform.sh
index b104428..8a94d09 100644
--- a/tests/scripts/components-platform.sh
+++ b/tests/scripts/components-platform.sh
@@ -149,49 +149,53 @@
     scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
 
     msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64"
-    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
+    make -B library/aesce.o library/aesce.s CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
+    msg "clang, test aarch64 crypto instructions built"
+    grep -E 'aes[a-z]+\s*[qv]' library/aesce.s
 
     msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
+    make -B library/aesce.o library/aesce.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
+    msg "clang, test A32 crypto instructions built"
+    grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.s
 
     msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
-
-    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-
-    msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64"
-    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
-
-    msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
-
-    msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
-
-    # test for presence of AES instructions
-    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
-    msg "clang, test A32 crypto instructions built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
-    grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
+    make -B library/aesce.o library/aesce.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
     msg "clang, test T32 crypto instructions built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
-    grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
-    msg "clang, test aarch64 crypto instructions built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
-    grep -E 'aes[a-z]+\s*[qv]' library/aesce.o
+    grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.s
 
-    # test for absence of AES instructions
     scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
+
+    msg "MBEDTLS_AES_USE_both, clang, aarch64"
+    make -B library/aesce.o library/aesce.s CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
+    msg "clang, test aarch64 crypto instructions built"
+    grep -E 'aes[a-z]+\s*[qv]' library/aesce.s
+
+    msg "MBEDTLS_AES_USE_both, clang, arm"
+    make -B library/aesce.o library/aesce.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
+    msg "clang, test A32 crypto instructions built"
+    grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.s
+
+    msg "MBEDTLS_AES_USE_both, clang, thumb"
+    make -B library/aesce.o library/aesce.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
+    msg "clang, test T32 crypto instructions built"
+    grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.s
+
     scripts/config.py unset MBEDTLS_AESCE_C
-    msg "clang, test A32 crypto instructions not built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
-    not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
-    msg "clang, test T32 crypto instructions not built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
-    not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
+
+    msg "no MBEDTLS_AESCE_C, clang, aarch64"
+    make -B library/aesce.o library/aesce.s CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
     msg "clang, test aarch64 crypto instructions not built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
-    not grep -E 'aes[a-z]+\s*[qv]' library/aesce.o
+    not grep -E 'aes[a-z]+\s*[qv]' library/aesce.s
+
+    msg "no MBEDTLS_AESCE_C, clang, arm"
+    make -B library/aesce.o library/aesce.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72 -marm"
+    msg "clang, test A32 crypto instructions not built"
+    not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.s
+
+    msg "no MBEDTLS_AESCE_C, clang, thumb"
+    make -B library/aesce.o library/aesce.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32 -mthumb"
+    msg "clang, test T32 crypto instructions not built"
+    not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.s
 }
 
 support_build_sha_armce () {
@@ -202,67 +206,59 @@
 component_build_sha_armce () {
     scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
 
-
     # Test variations of SHA256 Armv8 crypto extensions
     scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
         msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, aarch64"
-        make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
+        make -B library/sha256.o library/sha256.s CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
+        msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, test aarch64 crypto instructions built"
+        grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.s
+
         msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, arm"
-        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
+        make -B library/sha256.o library/sha256.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
+        msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, test A32 crypto instructions built"
+        grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.s
     scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
 
 
     # test the deprecated form of the config option
     scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
         msg "MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY clang, thumb"
-        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
+        make -B library/sha256.o library/sha256.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
+        msg "MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY clang, test T32 crypto instructions built"
+        grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.s
     scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
 
     scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
         msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT clang, aarch64"
-        make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
+        make -B library/sha256.o library/sha256.s CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
+        msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT clang, test aarch64 crypto instructions built"
+        grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.s
     scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
 
 
     # test the deprecated form of the config option
     scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
         msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, arm"
-        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -std=c99"
+        make -B library/sha256.o library/sha256.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -std=c99"
+
         msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, thumb"
-        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
+        make -B library/sha256.o library/sha256.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
+        msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, test T32 crypto instructions built"
+        grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.s
     scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
 
-
-    # examine the disassembly for presence of SHA instructions
-    for opt in MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT; do
-        scripts/config.py set ${opt}
-            msg "${opt} clang, test A32 crypto instructions built"
-            make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
-            grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
-
-            msg "${opt} clang, test T32 crypto instructions built"
-            make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
-            grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
-
-            msg "${opt} clang, test aarch64 crypto instructions built"
-            make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
-            grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.o
-        scripts/config.py unset ${opt}
-    done
-
-
     # examine the disassembly for absence of SHA instructions
     msg "clang, test A32 crypto instructions not built"
-    make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
-    not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
+    make -B library/sha256.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72 -marm"
+    not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.s
 
     msg "clang, test T32 crypto instructions not built"
-    make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
-    not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
+    make -B library/sha256.s CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32 -mthumb"
+    not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.s
 
     msg "clang, test aarch64 crypto instructions not built"
-    make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
-    not grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.o
+    make -B library/sha256.s CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
+    not grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.s
 }
 
 component_test_m32_no_asm () {
@@ -345,6 +341,118 @@
     esac
 }
 
+component_test_arm_linux_gnueabi_gcc_arm5vte () {
+    # Mimic Debian armel port
+    msg "test: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=arm5vte, default config" # ~4m
+    make CC="${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc" AR="${ARM_LINUX_GNUEABI_GCC_PREFIX}ar" CFLAGS='-Werror -Wall -Wextra -march=armv5te -O1'
+
+    msg "test: main suites make, default config (out-of-box)" # ~7m 40s
+    make test
+
+    msg "selftest: make, default config (out-of-box)" # ~0s
+    programs/test/selftest
+
+    msg "program demos: make, default config (out-of-box)" # ~0s
+    tests/scripts/run_demos.py
+}
+
+support_test_arm_linux_gnueabi_gcc_arm5vte () {
+    can_run_arm_linux_gnueabi
+}
+
+# The hard float ABI is not implemented for Thumb 1, so use gnueabi
+# Some Thumb 1 asm is sensitive to optimisation level, so test both -O0 and -Os
+component_test_arm_linux_gnueabi_gcc_thumb_1_opt_0 () {
+    msg "test: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -O0, thumb 1, default config" # ~2m 10s
+    make CC="${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc" CFLAGS='-std=c99 -Werror -Wextra -O0 -mcpu=arm1136j-s -mthumb'
+
+    msg "test: main suites make, default config (out-of-box)" # ~36m
+    make test
+
+    msg "selftest: make, default config (out-of-box)" # ~10s
+    programs/test/selftest
+
+    msg "program demos: make, default config (out-of-box)" # ~0s
+    tests/scripts/run_demos.py
+}
+
+support_test_arm_linux_gnueabi_gcc_thumb_1_opt_0 () {
+    can_run_arm_linux_gnueabi
+}
+
+component_test_arm_linux_gnueabi_gcc_thumb_1_opt_s () {
+    msg "test: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -Os, thumb 1, default config" # ~3m 10s
+    make CC="${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc" CFLAGS='-std=c99 -Werror -Wextra -Os -mcpu=arm1136j-s -mthumb'
+
+    msg "test: main suites make, default config (out-of-box)" # ~21m 10s
+    make test
+
+    msg "selftest: make, default config (out-of-box)" # ~2s
+    programs/test/selftest
+
+    msg "program demos: make, default config (out-of-box)" # ~0s
+    tests/scripts/run_demos.py
+}
+
+support_test_arm_linux_gnueabi_gcc_thumb_1_opt_s () {
+    can_run_arm_linux_gnueabi
+}
+
+component_test_arm_linux_gnueabihf_gcc_armv7 () {
+    msg "test: ${ARM_LINUX_GNUEABIHF_GCC_PREFIX}gcc -O2, A32, default config" # ~4m 30s
+    make CC="${ARM_LINUX_GNUEABIHF_GCC_PREFIX}gcc" CFLAGS='-std=c99 -Werror -Wextra -O2 -march=armv7-a -marm'
+
+    msg "test: main suites make, default config (out-of-box)" # ~3m 30s
+    make test
+
+    msg "selftest: make, default config (out-of-box)" # ~0s
+    programs/test/selftest
+
+    msg "program demos: make, default config (out-of-box)" # ~0s
+    tests/scripts/run_demos.py
+}
+
+support_test_arm_linux_gnueabihf_gcc_armv7 () {
+    can_run_arm_linux_gnueabihf
+}
+
+component_test_arm_linux_gnueabihf_gcc_thumb_2 () {
+    msg "test: ${ARM_LINUX_GNUEABIHF_GCC_PREFIX}gcc -Os, thumb 2, default config" # ~4m
+    make CC="${ARM_LINUX_GNUEABIHF_GCC_PREFIX}gcc" CFLAGS='-std=c99 -Werror -Wextra -Os -march=armv7-a -mthumb'
+
+    msg "test: main suites make, default config (out-of-box)" # ~3m 40s
+    make test
+
+    msg "selftest: make, default config (out-of-box)" # ~0s
+    programs/test/selftest
+
+    msg "program demos: make, default config (out-of-box)" # ~0s
+    tests/scripts/run_demos.py
+}
+
+support_test_arm_linux_gnueabihf_gcc_thumb_2 () {
+    can_run_arm_linux_gnueabihf
+}
+
+component_test_aarch64_linux_gnu_gcc () {
+    msg "test: ${AARCH64_LINUX_GNU_GCC_PREFIX}gcc -O2, default config" # ~3m 50s
+    make CC="${AARCH64_LINUX_GNU_GCC_PREFIX}gcc" CFLAGS='-std=c99 -Werror -Wextra -O2'
+
+    msg "test: main suites make, default config (out-of-box)" # ~1m 50s
+    make test
+
+    msg "selftest: make, default config (out-of-box)" # ~0s
+    programs/test/selftest
+
+    msg "program demos: make, default config (out-of-box)" # ~0s
+    tests/scripts/run_demos.py
+}
+
+support_test_aarch64_linux_gnu_gcc () {
+    # Minimum version of GCC for MBEDTLS_AESCE_C is 6.0
+    [ "$(gcc_version "${AARCH64_LINUX_GNU_GCC_PREFIX}gcc")" -ge 6 ] && can_run_aarch64_linux_gnu
+}
+
 component_build_arm_none_eabi_gcc () {
     msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug" # ~ 10s
     scripts/config.py baremetal
@@ -461,32 +569,32 @@
     # Compile mostly with -O1 since some Arm inline assembly is disabled for -O0.
 
     # ARM Compiler 6 - Target ARMv7-A
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-a"
+    helper_armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-a"
 
     # ARM Compiler 6 - Target ARMv7-M
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m"
+    helper_armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m"
 
     # ARM Compiler 6 - Target ARMv7-M+DSP
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m+dsp"
+    helper_armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m+dsp"
 
     # ARM Compiler 6 - Target ARMv8-A - AArch32
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8.2-a"
+    helper_armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8.2-a"
 
     # ARM Compiler 6 - Target ARMv8-M
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8-m.main"
+    helper_armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8-m.main"
 
     # ARM Compiler 6 - Target Cortex-M0 - no optimisation
-    armc6_build_test "-O0 --target=arm-arm-none-eabi -mcpu=cortex-m0"
+    helper_armc6_build_test "-O0 --target=arm-arm-none-eabi -mcpu=cortex-m0"
 
     # ARM Compiler 6 - Target Cortex-M0
-    armc6_build_test "-Os --target=arm-arm-none-eabi -mcpu=cortex-m0"
+    helper_armc6_build_test "-Os --target=arm-arm-none-eabi -mcpu=cortex-m0"
 
     # ARM Compiler 6 - Target ARMv8.2-A - AArch64
     #
     # Re-enable MBEDTLS_AESCE_C as this should be supported by the version of armclang
     # that we have in our CI
     scripts/config.py set MBEDTLS_AESCE_C
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8.2-a+crypto"
+    helper_armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8.2-a+crypto"
 }
 
 support_build_armcc () {
diff --git a/tests/scripts/generate_tls13_compat_tests.py b/tests/scripts/generate_tls13_compat_tests.py
deleted file mode 100755
index b9dcff4..0000000
--- a/tests/scripts/generate_tls13_compat_tests.py
+++ /dev/null
@@ -1,649 +0,0 @@
-#!/usr/bin/env python3
-
-# generate_tls13_compat_tests.py
-#
-# Copyright The Mbed TLS Contributors
-# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
-
-"""
-Generate TLSv1.3 Compat test cases
-
-"""
-
-import sys
-import os
-import argparse
-import itertools
-from collections import namedtuple
-
-# define certificates configuration entry
-Certificate = namedtuple("Certificate", ['cafile', 'certfile', 'keyfile'])
-# define the certificate parameters for signature algorithms
-CERTIFICATES = {
-    'ecdsa_secp256r1_sha256': Certificate('$DATA_FILES_PATH/test-ca2.crt',
-                                          '$DATA_FILES_PATH/ecdsa_secp256r1.crt',
-                                          '$DATA_FILES_PATH/ecdsa_secp256r1.key'),
-    'ecdsa_secp384r1_sha384': Certificate('$DATA_FILES_PATH/test-ca2.crt',
-                                          '$DATA_FILES_PATH/ecdsa_secp384r1.crt',
-                                          '$DATA_FILES_PATH/ecdsa_secp384r1.key'),
-    'ecdsa_secp521r1_sha512': Certificate('$DATA_FILES_PATH/test-ca2.crt',
-                                          '$DATA_FILES_PATH/ecdsa_secp521r1.crt',
-                                          '$DATA_FILES_PATH/ecdsa_secp521r1.key'),
-    'rsa_pss_rsae_sha256': Certificate('$DATA_FILES_PATH/test-ca_cat12.crt',
-                                       '$DATA_FILES_PATH/server2-sha256.crt',
-                                       '$DATA_FILES_PATH/server2.key')
-}
-
-CIPHER_SUITE_IANA_VALUE = {
-    "TLS_AES_128_GCM_SHA256": 0x1301,
-    "TLS_AES_256_GCM_SHA384": 0x1302,
-    "TLS_CHACHA20_POLY1305_SHA256": 0x1303,
-    "TLS_AES_128_CCM_SHA256": 0x1304,
-    "TLS_AES_128_CCM_8_SHA256": 0x1305
-}
-
-SIG_ALG_IANA_VALUE = {
-    "ecdsa_secp256r1_sha256": 0x0403,
-    "ecdsa_secp384r1_sha384": 0x0503,
-    "ecdsa_secp521r1_sha512": 0x0603,
-    'rsa_pss_rsae_sha256': 0x0804,
-}
-
-NAMED_GROUP_IANA_VALUE = {
-    'secp256r1': 0x17,
-    'secp384r1': 0x18,
-    'secp521r1': 0x19,
-    'x25519': 0x1d,
-    'x448': 0x1e,
-    # Only one finite field group to keep testing time within reasonable bounds.
-    'ffdhe2048': 0x100,
-}
-
-class TLSProgram:
-    """
-    Base class for generate server/client command.
-    """
-
-    # pylint: disable=too-many-arguments
-    def __init__(self, ciphersuite=None, signature_algorithm=None, named_group=None,
-                 cert_sig_alg=None):
-        self._ciphers = []
-        self._sig_algs = []
-        self._named_groups = []
-        self._cert_sig_algs = []
-        if ciphersuite:
-            self.add_ciphersuites(ciphersuite)
-        if named_group:
-            self.add_named_groups(named_group)
-        if signature_algorithm:
-            self.add_signature_algorithms(signature_algorithm)
-        if cert_sig_alg:
-            self.add_cert_signature_algorithms(cert_sig_alg)
-
-    # add_ciphersuites should not override by sub class
-    def add_ciphersuites(self, *ciphersuites):
-        self._ciphers.extend(
-            [cipher for cipher in ciphersuites if cipher not in self._ciphers])
-
-    # add_signature_algorithms should not override by sub class
-    def add_signature_algorithms(self, *signature_algorithms):
-        self._sig_algs.extend(
-            [sig_alg for sig_alg in signature_algorithms if sig_alg not in self._sig_algs])
-
-    # add_named_groups should not override by sub class
-    def add_named_groups(self, *named_groups):
-        self._named_groups.extend(
-            [named_group for named_group in named_groups if named_group not in self._named_groups])
-
-    # add_cert_signature_algorithms should not override by sub class
-    def add_cert_signature_algorithms(self, *signature_algorithms):
-        self._cert_sig_algs.extend(
-            [sig_alg for sig_alg in signature_algorithms if sig_alg not in self._cert_sig_algs])
-
-    # pylint: disable=no-self-use
-    def pre_checks(self):
-        return []
-
-    # pylint: disable=no-self-use
-    def cmd(self):
-        if not self._cert_sig_algs:
-            self._cert_sig_algs = list(CERTIFICATES.keys())
-        return self.pre_cmd()
-
-    # pylint: disable=no-self-use
-    def post_checks(self):
-        return []
-
-    # pylint: disable=no-self-use
-    def pre_cmd(self):
-        return ['false']
-
-    # pylint: disable=unused-argument,no-self-use
-    def hrr_post_checks(self, named_group):
-        return []
-
-
-class OpenSSLBase(TLSProgram):
-    """
-    Generate base test commands for OpenSSL.
-    """
-
-    NAMED_GROUP = {
-        'secp256r1': 'P-256',
-        'secp384r1': 'P-384',
-        'secp521r1': 'P-521',
-        'x25519': 'X25519',
-        'x448': 'X448',
-        'ffdhe2048': 'ffdhe2048',
-    }
-
-    def cmd(self):
-        ret = super().cmd()
-
-        if self._ciphers:
-            ciphersuites = ':'.join(self._ciphers)
-            ret += ["-ciphersuites {ciphersuites}".format(ciphersuites=ciphersuites)]
-
-        if self._sig_algs:
-            signature_algorithms = set(self._sig_algs + self._cert_sig_algs)
-            signature_algorithms = ':'.join(signature_algorithms)
-            ret += ["-sigalgs {signature_algorithms}".format(
-                signature_algorithms=signature_algorithms)]
-
-        if self._named_groups:
-            named_groups = ':'.join(
-                map(lambda named_group: self.NAMED_GROUP[named_group], self._named_groups))
-            ret += ["-groups {named_groups}".format(named_groups=named_groups)]
-
-        ret += ['-msg -tls1_3']
-
-        return ret
-
-    def pre_checks(self):
-        ret = ["requires_openssl_tls1_3"]
-
-        # ffdh groups require at least openssl 3.0
-        ffdh_groups = ['ffdhe2048']
-
-        if any(x in ffdh_groups for x in self._named_groups):
-            ret = ["requires_openssl_tls1_3_with_ffdh"]
-
-        return ret
-
-
-class OpenSSLServ(OpenSSLBase):
-    """
-    Generate test commands for OpenSSL server.
-    """
-
-    def cmd(self):
-        ret = super().cmd()
-        ret += ['-num_tickets 0 -no_resume_ephemeral -no_cache']
-        return ret
-
-    def post_checks(self):
-        return ['-c "HTTP/1.0 200 ok"']
-
-    def pre_cmd(self):
-        ret = ['$O_NEXT_SRV_NO_CERT']
-        for _, cert, key in map(lambda sig_alg: CERTIFICATES[sig_alg], self._cert_sig_algs):
-            ret += ['-cert {cert} -key {key}'.format(cert=cert, key=key)]
-        return ret
-
-
-class OpenSSLCli(OpenSSLBase):
-    """
-    Generate test commands for OpenSSL client.
-    """
-
-    def pre_cmd(self):
-        return ['$O_NEXT_CLI_NO_CERT',
-                '-CAfile {cafile}'.format(cafile=CERTIFICATES[self._cert_sig_algs[0]].cafile)]
-
-
-class GnuTLSBase(TLSProgram):
-    """
-    Generate base test commands for GnuTLS.
-    """
-
-    CIPHER_SUITE = {
-        'TLS_AES_256_GCM_SHA384': [
-            'AES-256-GCM',
-            'SHA384',
-            'AEAD'],
-        'TLS_AES_128_GCM_SHA256': [
-            'AES-128-GCM',
-            'SHA256',
-            'AEAD'],
-        'TLS_CHACHA20_POLY1305_SHA256': [
-            'CHACHA20-POLY1305',
-            'SHA256',
-            'AEAD'],
-        'TLS_AES_128_CCM_SHA256': [
-            'AES-128-CCM',
-            'SHA256',
-            'AEAD'],
-        'TLS_AES_128_CCM_8_SHA256': [
-            'AES-128-CCM-8',
-            'SHA256',
-            'AEAD']}
-
-    SIGNATURE_ALGORITHM = {
-        'ecdsa_secp256r1_sha256': ['SIGN-ECDSA-SECP256R1-SHA256'],
-        'ecdsa_secp521r1_sha512': ['SIGN-ECDSA-SECP521R1-SHA512'],
-        'ecdsa_secp384r1_sha384': ['SIGN-ECDSA-SECP384R1-SHA384'],
-        'rsa_pss_rsae_sha256': ['SIGN-RSA-PSS-RSAE-SHA256']}
-
-    NAMED_GROUP = {
-        'secp256r1': ['GROUP-SECP256R1'],
-        'secp384r1': ['GROUP-SECP384R1'],
-        'secp521r1': ['GROUP-SECP521R1'],
-        'x25519': ['GROUP-X25519'],
-        'x448': ['GROUP-X448'],
-        'ffdhe2048': ['GROUP-FFDHE2048'],
-    }
-
-    def pre_checks(self):
-        return ["requires_gnutls_tls1_3",
-                "requires_gnutls_next_no_ticket"]
-
-    def cmd(self):
-        ret = super().cmd()
-
-        priority_string_list = []
-
-        def update_priority_string_list(items, map_table):
-            for item in items:
-                for i in map_table[item]:
-                    if i not in priority_string_list:
-                        yield i
-
-        if self._ciphers:
-            priority_string_list.extend(update_priority_string_list(
-                self._ciphers, self.CIPHER_SUITE))
-        else:
-            priority_string_list.extend(['CIPHER-ALL', 'MAC-ALL'])
-
-        if self._sig_algs:
-            signature_algorithms = set(self._sig_algs + self._cert_sig_algs)
-            priority_string_list.extend(update_priority_string_list(
-                signature_algorithms, self.SIGNATURE_ALGORITHM))
-        else:
-            priority_string_list.append('SIGN-ALL')
-
-
-        if self._named_groups:
-            priority_string_list.extend(update_priority_string_list(
-                self._named_groups, self.NAMED_GROUP))
-        else:
-            priority_string_list.append('GROUP-ALL')
-
-        priority_string_list = ['NONE'] + \
-            priority_string_list + ['VERS-TLS1.3']
-
-        priority_string = ':+'.join(priority_string_list)
-        priority_string += ':%NO_TICKETS'
-
-        ret += ['--priority={priority_string}'.format(
-            priority_string=priority_string)]
-        return ret
-
-class GnuTLSServ(GnuTLSBase):
-    """
-    Generate test commands for GnuTLS server.
-    """
-
-    def pre_cmd(self):
-        ret = ['$G_NEXT_SRV_NO_CERT', '--http', '--disable-client-cert', '--debug=4']
-
-        for _, cert, key in map(lambda sig_alg: CERTIFICATES[sig_alg], self._cert_sig_algs):
-            ret += ['--x509certfile {cert} --x509keyfile {key}'.format(
-                cert=cert, key=key)]
-        return ret
-
-    def post_checks(self):
-        return ['-c "HTTP/1.0 200 OK"']
-
-
-class GnuTLSCli(GnuTLSBase):
-    """
-    Generate test commands for GnuTLS client.
-    """
-
-    def pre_cmd(self):
-        return ['$G_NEXT_CLI_NO_CERT', '--debug=4', '--single-key-share',
-                '--x509cafile {cafile}'.format(cafile=CERTIFICATES[self._cert_sig_algs[0]].cafile)]
-
-
-class MbedTLSBase(TLSProgram):
-    """
-    Generate base test commands for mbedTLS.
-    """
-
-    CIPHER_SUITE = {
-        'TLS_AES_256_GCM_SHA384': 'TLS1-3-AES-256-GCM-SHA384',
-        'TLS_AES_128_GCM_SHA256': 'TLS1-3-AES-128-GCM-SHA256',
-        'TLS_CHACHA20_POLY1305_SHA256': 'TLS1-3-CHACHA20-POLY1305-SHA256',
-        'TLS_AES_128_CCM_SHA256': 'TLS1-3-AES-128-CCM-SHA256',
-        'TLS_AES_128_CCM_8_SHA256': 'TLS1-3-AES-128-CCM-8-SHA256'}
-
-    def cmd(self):
-        ret = super().cmd()
-        ret += ['debug_level=4']
-
-
-        if self._ciphers:
-            ciphers = ','.join(
-                map(lambda cipher: self.CIPHER_SUITE[cipher], self._ciphers))
-            ret += ["force_ciphersuite={ciphers}".format(ciphers=ciphers)]
-
-        if self._sig_algs + self._cert_sig_algs:
-            ret += ['sig_algs={sig_algs}'.format(
-                sig_algs=','.join(set(self._sig_algs + self._cert_sig_algs)))]
-
-        if self._named_groups:
-            named_groups = ','.join(self._named_groups)
-            ret += ["groups={named_groups}".format(named_groups=named_groups)]
-        return ret
-
-    #pylint: disable=missing-function-docstring
-    def add_ffdh_group_requirements(self, requirement_list):
-        if 'ffdhe2048' in self._named_groups:
-            requirement_list.append('requires_config_enabled PSA_WANT_DH_RFC7919_2048')
-        if 'ffdhe3072' in self._named_groups:
-            requirement_list.append('requires_config_enabled PSA_WANT_DH_RFC7919_2048')
-        if 'ffdhe4096' in self._named_groups:
-            requirement_list.append('requires_config_enabled PSA_WANT_DH_RFC7919_2048')
-        if 'ffdhe6144' in self._named_groups:
-            requirement_list.append('requires_config_enabled PSA_WANT_DH_RFC7919_2048')
-        if 'ffdhe8192' in self._named_groups:
-            requirement_list.append('requires_config_enabled PSA_WANT_DH_RFC7919_2048')
-
-    def pre_checks(self):
-        ret = ['requires_config_enabled MBEDTLS_DEBUG_C',
-               'requires_config_enabled MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED']
-
-        if 'rsa_pss_rsae_sha256' in self._sig_algs + self._cert_sig_algs:
-            ret.append(
-                'requires_config_enabled MBEDTLS_X509_RSASSA_PSS_SUPPORT')
-
-        ec_groups = ['secp256r1', 'secp384r1', 'secp521r1', 'x25519', 'x448']
-        ffdh_groups = ['ffdhe2048', 'ffdhe3072', 'ffdhe4096', 'ffdhe6144', 'ffdhe8192']
-
-        if any(x in ec_groups for x in self._named_groups):
-            ret.append('requires_config_enabled PSA_WANT_ALG_ECDH')
-
-        if any(x in ffdh_groups for x in self._named_groups):
-            ret.append('requires_config_enabled PSA_WANT_ALG_FFDH')
-            self.add_ffdh_group_requirements(ret)
-
-        return ret
-
-
-class MbedTLSServ(MbedTLSBase):
-    """
-    Generate test commands for mbedTLS server.
-    """
-
-    def cmd(self):
-        ret = super().cmd()
-        ret += ['tls13_kex_modes=ephemeral cookies=0 tickets=0']
-        return ret
-
-    def pre_checks(self):
-        return ['requires_config_enabled MBEDTLS_SSL_SRV_C'] + super().pre_checks()
-
-    def post_checks(self):
-        check_strings = ["Protocol is TLSv1.3"]
-        if self._ciphers:
-            check_strings.append(
-                "server hello, chosen ciphersuite: {} ( id={:04d} )".format(
-                    self.CIPHER_SUITE[self._ciphers[0]],
-                    CIPHER_SUITE_IANA_VALUE[self._ciphers[0]]))
-        if self._sig_algs:
-            check_strings.append(
-                "received signature algorithm: 0x{:x}".format(
-                    SIG_ALG_IANA_VALUE[self._sig_algs[0]]))
-
-        for named_group in self._named_groups:
-            check_strings += ['got named group: {named_group}({iana_value:04x})'.format(
-                                named_group=named_group,
-                                iana_value=NAMED_GROUP_IANA_VALUE[named_group])]
-
-        check_strings.append("Certificate verification was skipped")
-        return ['-s "{}"'.format(i) for i in check_strings]
-
-    def pre_cmd(self):
-        ret = ['$P_SRV']
-        for _, cert, key in map(lambda sig_alg: CERTIFICATES[sig_alg], self._cert_sig_algs):
-            ret += ['crt_file={cert} key_file={key}'.format(cert=cert, key=key)]
-        return ret
-
-    def hrr_post_checks(self, named_group):
-        return ['-s "HRR selected_group: {:s}"'.format(named_group)]
-
-
-class MbedTLSCli(MbedTLSBase):
-    """
-    Generate test commands for mbedTLS client.
-    """
-
-    def pre_cmd(self):
-        return ['$P_CLI',
-                'ca_file={cafile}'.format(cafile=CERTIFICATES[self._cert_sig_algs[0]].cafile)]
-
-    def pre_checks(self):
-        return ['requires_config_enabled MBEDTLS_SSL_CLI_C'] + super().pre_checks()
-
-    def hrr_post_checks(self, named_group):
-        ret = ['-c "received HelloRetryRequest message"']
-        ret += ['-c "selected_group ( {:d} )"'.format(NAMED_GROUP_IANA_VALUE[named_group])]
-        return ret
-
-    def post_checks(self):
-        check_strings = ["Protocol is TLSv1.3"]
-        if self._ciphers:
-            check_strings.append(
-                "server hello, chosen ciphersuite: ( {:04x} ) - {}".format(
-                    CIPHER_SUITE_IANA_VALUE[self._ciphers[0]],
-                    self.CIPHER_SUITE[self._ciphers[0]]))
-        if self._sig_algs:
-            check_strings.append(
-                "Certificate Verify: Signature algorithm ( {:04x} )".format(
-                    SIG_ALG_IANA_VALUE[self._sig_algs[0]]))
-
-        for named_group in self._named_groups:
-            check_strings += ['NamedGroup: {named_group} ( {iana_value:x} )'.format(
-                                named_group=named_group,
-                                iana_value=NAMED_GROUP_IANA_VALUE[named_group])]
-
-        check_strings.append("Verifying peer X.509 certificate... ok")
-        return ['-c "{}"'.format(i) for i in check_strings]
-
-
-SERVER_CLASSES = {'OpenSSL': OpenSSLServ, 'GnuTLS': GnuTLSServ, 'mbedTLS': MbedTLSServ}
-CLIENT_CLASSES = {'OpenSSL': OpenSSLCli, 'GnuTLS': GnuTLSCli, 'mbedTLS': MbedTLSCli}
-
-
-def generate_compat_test(client=None, server=None, cipher=None, named_group=None, sig_alg=None):
-    """
-    Generate test case with `ssl-opt.sh` format.
-    """
-    name = 'TLS 1.3 {client[0]}->{server[0]}: {cipher},{named_group},{sig_alg}'.format(
-        client=client, server=server, cipher=cipher[4:], sig_alg=sig_alg, named_group=named_group)
-
-    server_object = SERVER_CLASSES[server](ciphersuite=cipher,
-                                           named_group=named_group,
-                                           signature_algorithm=sig_alg,
-                                           cert_sig_alg=sig_alg)
-    client_object = CLIENT_CLASSES[client](ciphersuite=cipher,
-                                           named_group=named_group,
-                                           signature_algorithm=sig_alg,
-                                           cert_sig_alg=sig_alg)
-
-    cmd = ['run_test "{}"'.format(name),
-           '"{}"'.format(' '.join(server_object.cmd())),
-           '"{}"'.format(' '.join(client_object.cmd())),
-           '0']
-    cmd += server_object.post_checks()
-    cmd += client_object.post_checks()
-    cmd += ['-C "received HelloRetryRequest message"']
-    prefix = ' \\\n' + (' '*9)
-    cmd = prefix.join(cmd)
-    return '\n'.join(server_object.pre_checks() + client_object.pre_checks() + [cmd])
-
-
-def generate_hrr_compat_test(client=None, server=None,
-                             client_named_group=None, server_named_group=None,
-                             cert_sig_alg=None):
-    """
-    Generate Hello Retry Request test case with `ssl-opt.sh` format.
-    """
-    name = 'TLS 1.3 {client[0]}->{server[0]}: HRR {c_named_group} -> {s_named_group}'.format(
-        client=client, server=server, c_named_group=client_named_group,
-        s_named_group=server_named_group)
-    server_object = SERVER_CLASSES[server](named_group=server_named_group,
-                                           cert_sig_alg=cert_sig_alg)
-
-    client_object = CLIENT_CLASSES[client](named_group=client_named_group,
-                                           cert_sig_alg=cert_sig_alg)
-    client_object.add_named_groups(server_named_group)
-
-    cmd = ['run_test "{}"'.format(name),
-           '"{}"'.format(' '.join(server_object.cmd())),
-           '"{}"'.format(' '.join(client_object.cmd())),
-           '0']
-    cmd += server_object.post_checks()
-    cmd += client_object.post_checks()
-    cmd += server_object.hrr_post_checks(server_named_group)
-    cmd += client_object.hrr_post_checks(server_named_group)
-    prefix = ' \\\n' + (' '*9)
-    cmd = prefix.join(cmd)
-    return '\n'.join(server_object.pre_checks() +
-                     client_object.pre_checks() +
-                     [cmd])
-
-SSL_OUTPUT_HEADER = '''\
-# TLS 1.3 interoperability test cases (equivalent of compat.sh for TLS 1.3).
-#
-# Automatically generated by {cmd}. Do not edit!
-
-# Copyright The Mbed TLS Contributors
-# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
-'''
-DATA_FILES_PATH_VAR = '''
-DATA_FILES_PATH=../framework/data_files
-'''
-
-def main():
-    """
-    Main function of this program
-    """
-    parser = argparse.ArgumentParser()
-
-    parser.add_argument('-o', '--output',
-                        default='tests/opt-testcases/tls13-compat.sh',
-                        help='Output file path (not used with -1)')
-
-    parser.add_argument('-1', '--single', action='store_true',
-                        help='Print a single test case')
-    # Single mode used to be the default.
-    parser.add_argument('-a', '--generate-all-tls13-compat-tests',
-                        action='store_false', dest='single',
-                        help='Generate all test cases (negates -1) (default)')
-
-    parser.add_argument('--list-ciphers', action='store_true',
-                        default=False, help='List supported ciphersuites')
-
-    parser.add_argument('--list-sig-algs', action='store_true',
-                        default=False, help='List supported signature algorithms')
-
-    parser.add_argument('--list-named-groups', action='store_true',
-                        default=False, help='List supported named groups')
-
-    parser.add_argument('--list-servers', action='store_true',
-                        default=False, help='List supported TLS servers')
-
-    parser.add_argument('--list-clients', action='store_true',
-                        default=False, help='List supported TLS Clients')
-
-    parser.add_argument('server', choices=SERVER_CLASSES.keys(), nargs='?',
-                        default=list(SERVER_CLASSES.keys())[0],
-                        help='Choose TLS server program for test')
-    parser.add_argument('client', choices=CLIENT_CLASSES.keys(), nargs='?',
-                        default=list(CLIENT_CLASSES.keys())[0],
-                        help='Choose TLS client program for test')
-    parser.add_argument('cipher', choices=CIPHER_SUITE_IANA_VALUE.keys(), nargs='?',
-                        default=list(CIPHER_SUITE_IANA_VALUE.keys())[0],
-                        help='Choose cipher suite for test')
-    parser.add_argument('sig_alg', choices=SIG_ALG_IANA_VALUE.keys(), nargs='?',
-                        default=list(SIG_ALG_IANA_VALUE.keys())[0],
-                        help='Choose cipher suite for test')
-    parser.add_argument('named_group', choices=NAMED_GROUP_IANA_VALUE.keys(), nargs='?',
-                        default=list(NAMED_GROUP_IANA_VALUE.keys())[0],
-                        help='Choose cipher suite for test')
-
-    args = parser.parse_args()
-
-    def get_all_test_cases():
-        # Generate normal compat test cases
-        for client, server, cipher, named_group, sig_alg in \
-            itertools.product(CLIENT_CLASSES.keys(),
-                              SERVER_CLASSES.keys(),
-                              CIPHER_SUITE_IANA_VALUE.keys(),
-                              NAMED_GROUP_IANA_VALUE.keys(),
-                              SIG_ALG_IANA_VALUE.keys()):
-            if server == 'mbedTLS' or client == 'mbedTLS':
-                yield generate_compat_test(client=client, server=server,
-                                           cipher=cipher, named_group=named_group,
-                                           sig_alg=sig_alg)
-
-
-        # Generate Hello Retry Request  compat test cases
-        for client, server, client_named_group, server_named_group in \
-            itertools.product(CLIENT_CLASSES.keys(),
-                              SERVER_CLASSES.keys(),
-                              NAMED_GROUP_IANA_VALUE.keys(),
-                              NAMED_GROUP_IANA_VALUE.keys()):
-
-            if (client == 'mbedTLS' or server == 'mbedTLS') and \
-                client_named_group != server_named_group:
-                yield generate_hrr_compat_test(client=client, server=server,
-                                               client_named_group=client_named_group,
-                                               server_named_group=server_named_group,
-                                               cert_sig_alg="ecdsa_secp256r1_sha256")
-
-    if not args.single:
-        if args.output:
-            with open(args.output, 'w', encoding="utf-8") as f:
-                f.write(SSL_OUTPUT_HEADER.format(
-                    filename=os.path.basename(args.output),
-                    cmd=os.path.basename(sys.argv[0])))
-                f.write(DATA_FILES_PATH_VAR)
-                f.write('\n\n'.join(get_all_test_cases()))
-                f.write('\n')
-        else:
-            print('\n\n'.join(get_all_test_cases()))
-        return 0
-
-    if args.list_ciphers or args.list_sig_algs or args.list_named_groups \
-            or args.list_servers or args.list_clients:
-        if args.list_ciphers:
-            print(*CIPHER_SUITE_IANA_VALUE.keys())
-        if args.list_sig_algs:
-            print(*SIG_ALG_IANA_VALUE.keys())
-        if args.list_named_groups:
-            print(*NAMED_GROUP_IANA_VALUE.keys())
-        if args.list_servers:
-            print(*SERVER_CLASSES.keys())
-        if args.list_clients:
-            print(*CLIENT_CLASSES.keys())
-        return 0
-
-    print(generate_compat_test(server=args.server, client=args.client, sig_alg=args.sig_alg,
-                               cipher=args.cipher, named_group=args.named_group))
-    return 0
-
-
-if __name__ == "__main__":
-    sys.exit(main())
diff --git a/tests/scripts/translate_ciphers.py b/tests/scripts/translate_ciphers.py
deleted file mode 100755
index 90514fc..0000000
--- a/tests/scripts/translate_ciphers.py
+++ /dev/null
@@ -1,180 +0,0 @@
-#!/usr/bin/env python3
-
-# translate_ciphers.py
-#
-# Copyright The Mbed TLS Contributors
-# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
-
-"""
-Translate standard ciphersuite names to GnuTLS, OpenSSL and Mbed TLS standards.
-
-To test the translation functions run:
-python3 -m unittest translate_cipher.py
-"""
-
-import re
-import argparse
-import unittest
-
-class TestTranslateCiphers(unittest.TestCase):
-    """
-    Ensure translate_ciphers.py translates and formats ciphersuite names
-    correctly
-    """
-    def test_translate_all_cipher_names(self):
-        """
-        Translate standard ciphersuite names to GnuTLS, OpenSSL and
-        Mbed TLS counterpart. Use only a small subset of ciphers
-        that exercise each step of the translation functions
-        """
-        ciphers = [
-            ("TLS_ECDHE_ECDSA_WITH_NULL_SHA",
-             "+ECDHE-ECDSA:+NULL:+SHA1",
-             "ECDHE-ECDSA-NULL-SHA",
-             "TLS-ECDHE-ECDSA-WITH-NULL-SHA"),
-            ("TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256",
-             "+ECDHE-ECDSA:+AES-128-GCM:+AEAD",
-             "ECDHE-ECDSA-AES128-GCM-SHA256",
-             "TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256"),
-            ("TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA",
-             "+DHE-RSA:+3DES-CBC:+SHA1",
-             "EDH-RSA-DES-CBC3-SHA",
-             "TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA"),
-            ("TLS_RSA_WITH_AES_256_CBC_SHA",
-             "+RSA:+AES-256-CBC:+SHA1",
-             "AES256-SHA",
-             "TLS-RSA-WITH-AES-256-CBC-SHA"),
-            ("TLS_PSK_WITH_3DES_EDE_CBC_SHA",
-             "+PSK:+3DES-CBC:+SHA1",
-             "PSK-3DES-EDE-CBC-SHA",
-             "TLS-PSK-WITH-3DES-EDE-CBC-SHA"),
-            ("TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256",
-             None,
-             "ECDHE-ECDSA-CHACHA20-POLY1305",
-             "TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256"),
-            ("TLS_ECDHE_ECDSA_WITH_AES_128_CCM",
-             "+ECDHE-ECDSA:+AES-128-CCM:+AEAD",
-             None,
-             "TLS-ECDHE-ECDSA-WITH-AES-128-CCM"),
-            ("TLS_ECDHE_RSA_WITH_ARIA_256_GCM_SHA384",
-             None,
-             "ECDHE-ARIA256-GCM-SHA384",
-             "TLS-ECDHE-RSA-WITH-ARIA-256-GCM-SHA384"),
-        ]
-
-        for s, g_exp, o_exp, m_exp in ciphers:
-
-            if g_exp is not None:
-                g = translate_gnutls(s)
-                self.assertEqual(g, g_exp)
-
-            if o_exp is not None:
-                o = translate_ossl(s)
-                self.assertEqual(o, o_exp)
-
-            if m_exp is not None:
-                m = translate_mbedtls(s)
-                self.assertEqual(m, m_exp)
-
-def translate_gnutls(s_cipher):
-    """
-    Translate s_cipher from standard ciphersuite naming convention
-    and return the GnuTLS naming convention
-    """
-
-    # Replace "_" with "-" to handle ciphersuite names based on Mbed TLS
-    # naming convention
-    s_cipher = s_cipher.replace("_", "-")
-
-    s_cipher = re.sub(r'\ATLS-', '+', s_cipher)
-    s_cipher = s_cipher.replace("-WITH-", ":+")
-    s_cipher = s_cipher.replace("-EDE", "")
-
-    # SHA in Mbed TLS == SHA1 GnuTLS,
-    # if the last 3 chars are SHA append 1
-    if s_cipher[-3:] == "SHA":
-        s_cipher = s_cipher+"1"
-
-    # CCM or CCM-8 should be followed by ":+AEAD"
-    # Replace "GCM:+SHAxyz" with "GCM:+AEAD"
-    if "CCM" in s_cipher or "GCM" in s_cipher:
-        s_cipher = re.sub(r"GCM-SHA\d\d\d", "GCM", s_cipher)
-        s_cipher = s_cipher+":+AEAD"
-
-    # Replace the last "-" with ":+"
-    else:
-        index = s_cipher.rindex("-")
-        s_cipher = s_cipher[:index] + ":+" + s_cipher[index+1:]
-
-    return s_cipher
-
-def translate_ossl(s_cipher):
-    """
-    Translate s_cipher from standard ciphersuite naming convention
-    and return the OpenSSL naming convention
-    """
-
-    # Replace "_" with "-" to handle ciphersuite names based on Mbed TLS
-    # naming convention
-    s_cipher = s_cipher.replace("_", "-")
-
-    s_cipher = re.sub(r'^TLS-', '', s_cipher)
-    s_cipher = s_cipher.replace("-WITH", "")
-
-    # Remove the "-" from "ABC-xyz"
-    s_cipher = s_cipher.replace("AES-", "AES")
-    s_cipher = s_cipher.replace("CAMELLIA-", "CAMELLIA")
-    s_cipher = s_cipher.replace("ARIA-", "ARIA")
-
-    # Remove "RSA" if it is at the beginning
-    s_cipher = re.sub(r'^RSA-', r'', s_cipher)
-
-    # For all circumstances outside of PSK
-    if "PSK" not in s_cipher:
-        s_cipher = s_cipher.replace("-EDE", "")
-        s_cipher = s_cipher.replace("3DES-CBC", "DES-CBC3")
-
-        # Remove "CBC" if it is not prefixed by DES
-        s_cipher = re.sub(r'(?<!DES-)CBC-', r'', s_cipher)
-
-    # ECDHE-RSA-ARIA does not exist in OpenSSL
-    s_cipher = s_cipher.replace("ECDHE-RSA-ARIA", "ECDHE-ARIA")
-
-    # POLY1305 should not be followed by anything
-    if "POLY1305" in s_cipher:
-        index = s_cipher.rindex("POLY1305")
-        s_cipher = s_cipher[:index+8]
-
-    # If DES is being used, Replace DHE with EDH
-    if "DES" in s_cipher and "DHE" in s_cipher and "ECDHE" not in s_cipher:
-        s_cipher = s_cipher.replace("DHE", "EDH")
-
-    return s_cipher
-
-def translate_mbedtls(s_cipher):
-    """
-    Translate s_cipher from standard ciphersuite naming convention
-    and return Mbed TLS ciphersuite naming convention
-    """
-
-    # Replace "_" with "-"
-    s_cipher = s_cipher.replace("_", "-")
-
-    return s_cipher
-
-def format_ciphersuite_names(mode, names):
-    t = {"g": translate_gnutls,
-         "o": translate_ossl,
-         "m": translate_mbedtls
-        }[mode]
-    return " ".join(c + '=' + t(c) for c in names)
-
-def main(target, names):
-    print(format_ciphersuite_names(target, names))
-
-if __name__ == "__main__":
-    PARSER = argparse.ArgumentParser()
-    PARSER.add_argument('target', metavar='TARGET', choices=['o', 'g', 'm'])
-    PARSER.add_argument('names', metavar='NAMES', nargs='+')
-    ARGS = PARSER.parse_args()
-    main(ARGS.target, ARGS.names)
diff --git a/tests/src/bignum_codepath_check.c b/tests/src/bignum_codepath_check.c
index b752d13..9c6bbc7 100644
--- a/tests/src/bignum_codepath_check.c
+++ b/tests/src/bignum_codepath_check.c
@@ -11,14 +11,14 @@
 #if defined(MBEDTLS_TEST_HOOKS) && !defined(MBEDTLS_THREADING_C)
 int mbedtls_codepath_check = MBEDTLS_MPI_IS_TEST;
 
-void mbedtls_codepath_take_safe(void)
+static void mbedtls_codepath_take_safe(void)
 {
     if (mbedtls_codepath_check == MBEDTLS_MPI_IS_TEST) {
         mbedtls_codepath_check = MBEDTLS_MPI_IS_SECRET;
     }
 }
 
-void mbedtls_codepath_take_unsafe(void)
+static void mbedtls_codepath_take_unsafe(void)
 {
     mbedtls_codepath_check = MBEDTLS_MPI_IS_PUBLIC;
 }
diff --git a/tests/suites/test_suite_ctr_drbg.function b/tests/suites/test_suite_ctr_drbg.function
index 9fa55a7..78a63ea 100644
--- a/tests/suites/test_suite_ctr_drbg.function
+++ b/tests/suites/test_suite_ctr_drbg.function
@@ -363,14 +363,14 @@
      * as this was the value used when the expected answers were calculated. */
     const size_t entropy_len = 48;
 
+    mbedtls_ctr_drbg_context ctx;
+    mbedtls_ctr_drbg_init(&ctx);
+
     AES_PSA_INIT();
 
     TEST_CALLOC(threads, sizeof(mbedtls_test_thread_t) * thread_count);
     memset(out, 0, sizeof(out));
 
-    mbedtls_ctr_drbg_context ctx;
-    mbedtls_ctr_drbg_init(&ctx);
-
     test_offset_idx = 0;
 
     /* Need to set a non-default fixed entropy len, to ensure same output across
diff --git a/tests/suites/test_suite_pkparse.data b/tests/suites/test_suite_pkparse.data
index 1442749..b25a796 100644
--- a/tests/suites/test_suite_pkparse.data
+++ b/tests/suites/test_suite_pkparse.data
@@ -51,23 +51,23 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs1_2048_aes256.pem":"testkey":0
 
 Parse RSA Key #14 (4096-bit, DES Encrypted)
-depends_on:MBEDTLS_MD_CAN_MD5:MBEDTLS_DES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_MD_CAN_MD5:MBEDTLS_DES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs1_4096_des.pem":"testkey":0
 
 Parse RSA Key #15 (4096-bit, 3DES Encrypted)
-depends_on:MBEDTLS_MD_CAN_MD5:MBEDTLS_DES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_MD_CAN_MD5:MBEDTLS_DES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs1_4096_3des.pem":"testkey":0
 
 Parse RSA Key #16 (4096-bit, AES-128 Encrypted)
-depends_on:MBEDTLS_MD_CAN_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_MD_CAN_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs1_4096_aes128.pem":"testkey":0
 
 Parse RSA Key #17 (4096-bit, AES-192 Encrypted)
-depends_on:MBEDTLS_MD_CAN_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:!MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
+depends_on:MBEDTLS_MD_CAN_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:!MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs1_4096_aes192.pem":"testkey":0
 
 Parse RSA Key #18 (4096-bit, AES-256 Encrypted)
-depends_on:MBEDTLS_MD_CAN_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:!MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
+depends_on:MBEDTLS_MD_CAN_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:!MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs1_4096_aes256.pem":"testkey":0
 
 Parse RSA Key #19 (PKCS#8 wrapped)
@@ -99,15 +99,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_2048_3des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #22 (PKCS#8 encrypted SHA1-3DES, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_4096_3des.pem":"PolarSSLTest":0
 
 Parse RSA Key #22.1 (PKCS#8 encrypted SHA1-3DES, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_4096_3des.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #22.2 (PKCS#8 encrypted SHA1-3DES, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_4096_3des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #23 (PKCS#8 encrypted SHA1-3DES DER)
@@ -119,7 +119,7 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_2048_3des.der":"PolarSSLTest":0
 
 Parse RSA Key #25 (PKCS#8 encrypted SHA1-3DES DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_4096_3des.der":"PolarSSLTest":0
 
 Parse RSA Key #26 (PKCS#8 encrypted SHA1-2DES)
@@ -147,15 +147,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_2048_2des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #28 (PKCS#8 encrypted SHA1-2DES, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_4096_2des.pem":"PolarSSLTest":0
 
 Parse RSA Key #28.1 (PKCS#8 encrypted SHA1-2DES, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_4096_2des.pem":"PolarSLTest":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #28.2 (PKCS#8 encrypted SHA1-2DES, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_4096_2des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #29 (PKCS#8 encrypted SHA1-2DES DER)
@@ -167,7 +167,7 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_2048_2des.der":"PolarSSLTest":0
 
 Parse RSA Key #31 (PKCS#8 encrypted SHA1-2DES DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbe_sha1_4096_2des.der":"PolarSSLTest":0
 
 Parse RSA Key #38 (PKCS#8 encrypted v2 PBKDF2 3DES)
@@ -195,15 +195,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #40 (PKCS#8 encrypted v2 PBKDF2 3DES, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem":"PolarSSLTest":0
 
 Parse RSA Key #40.1 (PKCS#8 encrypted v2 PBKDF2 3DES, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #40.2 (PKCS#8 encrypted v2 PBKDF2 3DES, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #41 (PKCS#8 encrypted v2 PBKDF2 3DES DER)
@@ -231,15 +231,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #43 (PKCS#8 encrypted v2 PBKDF2 3DES DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.der":"PolarSSLTest":0
 
 Parse RSA Key #43.1 (PKCS#8 encrypted v2 PBKDF2 3DES DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #43.2 (PKCS#8 encrypted v2 PBKDF2 3DES DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #44 (PKCS#8 encrypted v2 PBKDF2 DES)
@@ -267,15 +267,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #46 (PKCS#8 encrypted v2 PBKDF2 DES, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.pem":"PolarSSLTest":0
 
 Parse RSA Key #46.1 (PKCS#8 encrypted v2 PBKDF2 DES, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #46.2 (PKCS#8 encrypted v2 PBKDF2 DES, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #47 (PKCS#8 encrypted v2 PBKDF2 DES DER)
@@ -303,15 +303,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #49 (PKCS#8 encrypted v2 PBKDF2 DES DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.der":"PolarSSLTest":0
 
 Parse RSA Key #49.1 (PKCS#8 encrypted v2 PBKDF2 DES DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #49.2 (PKCS#8 encrypted v2 PBKDF2 DES DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #50 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224)
@@ -339,15 +339,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #52 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem":"PolarSSLTest":0
 
 Parse RSA Key #52.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #52.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #53 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224 DER)
@@ -375,15 +375,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #55 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der":"PolarSSLTest":0
 
 Parse RSA Key #55.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #55.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #56 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224)
@@ -411,15 +411,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #58 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem":"PolarSSLTest":0
 
 Parse RSA Key #58.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #58.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #59 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224 DER)
@@ -447,15 +447,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #61 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der":"PolarSSLTest":0
 
 Parse RSA Key #61.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #61.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #62 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256)
@@ -483,15 +483,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #64 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem":"PolarSSLTest":0
 
 Parse RSA Key #64.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #64.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #65 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256 DER)
@@ -519,15 +519,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #67 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der":"PolarSSLTest":0
 
 Parse RSA Key #68.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #68.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #69 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256)
@@ -555,15 +555,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #71 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem":"PolarSSLTest":0
 
 Parse RSA Key #71.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #71.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #72 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256 DER)
@@ -591,15 +591,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #74 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der":"PolarSSLTest":0
 
 Parse RSA Key #74.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #74.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #75 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384)
@@ -627,15 +627,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #77 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem":"PolarSSLTest":0
 
 Parse RSA Key #77.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #77.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #78 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384 DER)
@@ -663,15 +663,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #80 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der":"PolarSSLTest":0
 
 Parse RSA Key #80.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #80.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #81 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384)
@@ -699,15 +699,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #83 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem":"PolarSSLTest":0
 
 Parse RSA Key #83.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #83.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #84 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384 DER)
@@ -735,15 +735,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #87 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der":"PolarSSLTest":0
 
 Parse RSA Key #87.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #87.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #88 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512)
@@ -771,15 +771,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #90 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem":"PolarSSLTest":0
 
 Parse RSA Key #90.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #90.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #91 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512 DER)
@@ -807,15 +807,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #93 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der":"PolarSSLTest":0
 
 Parse RSA Key #93.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #93.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #94 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512)
@@ -843,15 +843,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #96 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem":"PolarSSLTest":0
 
 Parse RSA Key #96.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #96.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #97 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512 DER)
@@ -879,15 +879,15 @@
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #99 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der":"PolarSSLTest":0
 
 Parse RSA Key #99.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #99.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:MBEDTLS_MD_CAN_SHA512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #99.3 (PKCS#8 encrypted v2 PBKDF2 AES-128-CBC hmacWithSHA384, 2048-bit)
diff --git a/tests/suites/test_suite_pkwrite.data b/tests/suites/test_suite_pkwrite.data
index b1fb73b..62c3e8d 100644
--- a/tests/suites/test_suite_pkwrite.data
+++ b/tests/suites/test_suite_pkwrite.data
@@ -7,11 +7,11 @@
 pk_write_pubkey_check:"../framework/data_files/server1.pubkey.der":TEST_DER
 
 Public key write check RSA 4096
-depends_on:MBEDTLS_RSA_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C
+depends_on:MBEDTLS_RSA_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_write_pubkey_check:"../framework/data_files/rsa4096_pub.pem":TEST_PEM
 
 Public key write check RSA 4096 (DER)
-depends_on:MBEDTLS_RSA_C
+depends_on:MBEDTLS_RSA_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_write_pubkey_check:"../framework/data_files/rsa4096_pub.der":TEST_DER
 
 Public key write check EC 192 bits
@@ -63,11 +63,11 @@
 pk_write_key_check:"../framework/data_files/server1.key.der":TEST_DER
 
 Private key write check RSA 4096
-depends_on:MBEDTLS_RSA_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C
+depends_on:MBEDTLS_RSA_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_write_key_check:"../framework/data_files/rsa4096_prv.pem":TEST_PEM
 
 Private key write check RSA 4096 (DER)
-depends_on:MBEDTLS_RSA_C
+depends_on:MBEDTLS_RSA_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_write_key_check:"../framework/data_files/rsa4096_prv.der":TEST_DER
 
 Private key write check EC 192 bits
@@ -131,7 +131,7 @@
 pk_write_public_from_private:"../framework/data_files/server1.key.der":"../framework/data_files/server1.pubkey.der"
 
 Derive public key RSA 4096
-depends_on:MBEDTLS_RSA_C
+depends_on:MBEDTLS_RSA_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_write_public_from_private:"../framework/data_files/rsa4096_prv.der":"../framework/data_files/rsa4096_pub.der"
 
 Derive public key EC 192 bits
diff --git a/tests/suites/test_suite_pkwrite.function b/tests/suites/test_suite_pkwrite.function
index 735c125..491bc48 100644
--- a/tests/suites/test_suite_pkwrite.function
+++ b/tests/suites/test_suite_pkwrite.function
@@ -2,6 +2,7 @@
 #include "pk_internal.h"
 #include "mbedtls/pem.h"
 #include "mbedtls/oid.h"
+#include "mbedtls/base64.h"
 #include "psa/crypto_sizes.h"
 
 typedef enum {
@@ -73,6 +74,7 @@
     unsigned char *check_buf = NULL;
     unsigned char *start_buf;
     size_t buf_len, check_buf_len;
+    int expected_result;
 #if defined(MBEDTLS_USE_PSA_CRYPTO)
     mbedtls_svc_key_id_t opaque_id = MBEDTLS_SVC_KEY_ID_INIT;
     psa_key_attributes_t key_attr = PSA_KEY_ATTRIBUTES_INIT;
@@ -109,6 +111,17 @@
 
     start_buf = buf;
     buf_len = check_buf_len;
+    if (is_der) {
+        expected_result = MBEDTLS_ERR_ASN1_BUF_TOO_SMALL;
+    } else {
+        expected_result = MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL;
+    }
+    /* Intentionally pass a wrong size for the provided output buffer and check
+     * that the writing functions fails as expected. */
+    for (size_t i = 1; i < buf_len; i++) {
+        TEST_EQUAL(pk_write_any_key(&key, &start_buf, &i, is_public_key,
+                                    is_der), expected_result);
+    }
     TEST_EQUAL(pk_write_any_key(&key, &start_buf, &buf_len, is_public_key,
                                 is_der), 0);
 
@@ -127,6 +140,12 @@
         TEST_EQUAL(mbedtls_pk_setup_opaque(&key, opaque_id), 0);
         start_buf = buf;
         buf_len = check_buf_len;
+        /* Intentionally pass a wrong size for the provided output buffer and check
+         * that the writing functions fails as expected. */
+        for (size_t i = 1; i < buf_len; i++) {
+            TEST_EQUAL(pk_write_any_key(&key, &start_buf, &i, is_public_key,
+                                        is_der), expected_result);
+        }
         TEST_EQUAL(pk_write_any_key(&key, &start_buf, &buf_len, is_public_key,
                                     is_der), 0);
 
diff --git a/tests/suites/test_suite_psa_crypto.data b/tests/suites/test_suite_psa_crypto.data
index 4149fdb..bbf7575 100644
--- a/tests/suites/test_suite_psa_crypto.data
+++ b/tests/suites/test_suite_psa_crypto.data
@@ -7170,7 +7170,7 @@
 # and not expected to be raised any time soon) is less than the maximum
 # output from HKDF-SHA512 (255*64 = 16320 bytes).
 PSA key derivation: largest possible key
-depends_on:PSA_WANT_ALG_HKDF:PSA_WANT_ALG_SHA_512
+depends_on:PSA_WANT_ALG_HKDF:PSA_WANT_ALG_SHA_512:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= PSA_BITS_TO_BYTES(PSA_MAX_KEY_BITS)
 derive_key:PSA_ALG_HKDF(PSA_ALG_SHA_512):"0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b":"000102030405060708090a0b0c":"f0f1f2f3f4f5f6f7f8f9":PSA_KEY_TYPE_RAW_DATA:PSA_MAX_KEY_BITS:PSA_SUCCESS:1
 
 PSA key derivation: key too large
@@ -7414,12 +7414,15 @@
 generate_key:PSA_KEY_TYPE_RAW_DATA:9:PSA_KEY_USAGE_EXPORT:0:PSA_ERROR_INVALID_ARGUMENT:0
 
 PSA generate key: raw data, (MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8 bits
+depends_on:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= (MBEDTLS_CTR_DRBG_MAX_REQUEST + 1)
 generate_key:PSA_KEY_TYPE_RAW_DATA:(MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:0
 
 PSA generate key: raw data, (2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8 bits
+depends_on:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= (2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1)
 generate_key:PSA_KEY_TYPE_RAW_DATA:(2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:0
 
 PSA generate key: raw data, 65528 bits (large key, ok if it fits)
+depends_on:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= PSA_BITS_TO_BYTES(65528)
 generate_key:PSA_KEY_TYPE_RAW_DATA:65528:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:1
 
 PSA generate key: raw data, 65536 bits (not supported)
@@ -7490,6 +7493,17 @@
 depends_on:PSA_WANT_ALG_RSA_PKCS1V15_CRYPT:PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE
 generate_key:PSA_KEY_TYPE_RSA_KEY_PAIR:PSA_VENDOR_RSA_MAX_KEY_BITS+8:PSA_KEY_USAGE_EXPORT | PSA_KEY_USAGE_ENCRYPT | PSA_KEY_USAGE_DECRYPT:PSA_ALG_RSA_PKCS1V15_CRYPT:PSA_ERROR_NOT_SUPPORTED:0
 
+# Following 2 tests are meant to be tested from the component_test_crypto_with_static_key_slots()
+# test component. There MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE is intentionally set to a value
+# that is OK for all public RSA key bit sizes, but only valid up to 2048 bits for key pairs.
+PSA generate key: RSA, key pair size does not fit in static key buffer
+depends_on:PSA_WANT_ALG_RSA_PKCS1V15_CRYPT:PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE:MBEDTLS_PSA_STATIC_KEY_SLOTS:!MBEDTLS_TEST_STATIC_KEY_SLOTS_SUPPORT_RSA_4096:PSA_VENDOR_RSA_MAX_KEY_BITS>=4096
+generate_key:PSA_KEY_TYPE_RSA_KEY_PAIR:4096:PSA_KEY_USAGE_EXPORT:PSA_ALG_RSA_PKCS1V15_CRYPT:PSA_ERROR_NOT_SUPPORTED:0
+
+PSA generate key: RSA, key pair size fits in static key buffer
+depends_on:PSA_WANT_ALG_RSA_PKCS1V15_CRYPT:PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE:MBEDTLS_PSA_STATIC_KEY_SLOTS:MBEDTLS_TEST_STATIC_KEY_SLOTS_SUPPORT_RSA_2048:PSA_VENDOR_RSA_MAX_KEY_BITS>=2048
+generate_key:PSA_KEY_TYPE_RSA_KEY_PAIR:2048:PSA_KEY_USAGE_EXPORT:PSA_ALG_RSA_PKCS1V15_CRYPT:PSA_SUCCESS:0
+
 PSA generate key: ECC, SECP256R1, good
 depends_on:PSA_WANT_ALG_ECDSA:PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE:PSA_WANT_ECC_SECP_R1_256
 generate_key:PSA_KEY_TYPE_ECC_KEY_PAIR(PSA_ECC_FAMILY_SECP_R1):256:PSA_KEY_USAGE_EXPORT | PSA_KEY_USAGE_SIGN_HASH | PSA_KEY_USAGE_VERIFY_HASH:PSA_ALG_ECDSA_ANY:PSA_SUCCESS:0
@@ -7655,15 +7669,15 @@
 concurrently_generate_keys:PSA_KEY_TYPE_RAW_DATA:9:PSA_KEY_USAGE_EXPORT:0:PSA_ERROR_INVALID_ARGUMENT:0:8:5
 
 PSA concurrent key generation: raw data, (MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8 bits
-depends_on:MBEDTLS_THREADING_PTHREAD
+depends_on:MBEDTLS_THREADING_PTHREAD:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= (MBEDTLS_CTR_DRBG_MAX_REQUEST + 1)
 concurrently_generate_keys:PSA_KEY_TYPE_RAW_DATA:(MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:0:8:5
 
 PSA concurrent key generation: raw data, (2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8 bits
-depends_on:MBEDTLS_THREADING_PTHREAD
+depends_on:MBEDTLS_THREADING_PTHREAD:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= (2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1)
 concurrently_generate_keys:PSA_KEY_TYPE_RAW_DATA:(2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:0:8:5
 
 PSA concurrent key generation: raw data, 65528 bits (large key, ok if it fits)
-depends_on:MBEDTLS_THREADING_PTHREAD
+depends_on:MBEDTLS_THREADING_PTHREAD:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE > PSA_BITS_TO_BYTES(65528)
 concurrently_generate_keys:PSA_KEY_TYPE_RAW_DATA:65528:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:1:8:5
 
 PSA concurrent key generation: raw data, 65536 bits (not supported)
@@ -7859,9 +7873,7 @@
 depends_on:PSA_WANT_ECC_SECP_K1_192
 ecc_conversion_functions:MBEDTLS_ECP_DP_SECP192K1:PSA_ECC_FAMILY_SECP_K1:192
 
-ECP group ID <-> PSA family - SECP224K1
-depends_on:PSA_WANT_ECC_SECP_K1_224
-ecc_conversion_functions:MBEDTLS_ECP_DP_SECP224K1:PSA_ECC_FAMILY_SECP_K1:224
+# No test case for SECP224K1, which is not implemented in the PSA API.
 
 ECP group ID <-> PSA family - SECP256K1
 depends_on:PSA_WANT_ECC_SECP_K1_256
@@ -7876,4 +7888,3 @@
 
 ECP group ID <-> PSA family - Wrong values
 ecc_conversion_functions_fail
-
diff --git a/tests/suites/test_suite_psa_crypto.function b/tests/suites/test_suite_psa_crypto.function
index 2e513ea..94bf28b 100644
--- a/tests/suites/test_suite_psa_crypto.function
+++ b/tests/suites/test_suite_psa_crypto.function
@@ -1236,7 +1236,7 @@
 }
 #endif /* MBEDTLS_ECP_RESTARTABLE */
 
-#if defined(PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE)
+#if defined(PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE) && defined(MBEDTLS_ASN1_PARSE_C)
 static int rsa_test_e(mbedtls_svc_key_id_t key,
                       size_t bits,
                       const data_t *e_arg)
@@ -1639,7 +1639,7 @@
 }
 /* END_CASE */
 
-/* BEGIN_CASE */
+/* BEGIN_CASE depends_on: !MBEDTLS_PSA_STATIC_KEY_SLOTS*/
 /* Construct and attempt to import a large unstructured key. */
 void import_large_key(int type_arg, int byte_size_arg,
                       int expected_status_arg)
@@ -10246,7 +10246,7 @@
     TEST_EQUAL(psa_get_key_type(&got_attributes), type);
     TEST_EQUAL(psa_get_key_bits(&got_attributes), bits);
 
-#if defined(PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE)
+#if defined(PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE) && defined(MBEDTLS_ASN1_PARSE_C)
     if (type == PSA_KEY_TYPE_RSA_KEY_PAIR) {
         TEST_ASSERT(rsa_test_e(key, bits, custom_data));
     }
diff --git a/tests/suites/test_suite_psa_crypto_driver_wrappers.function b/tests/suites/test_suite_psa_crypto_driver_wrappers.function
index 84611fa..49b1c15 100644
--- a/tests/suites/test_suite_psa_crypto_driver_wrappers.function
+++ b/tests/suites/test_suite_psa_crypto_driver_wrappers.function
@@ -6,13 +6,14 @@
 size_t pake_expected_hit_count = 0;
 int pake_in_driver = 0;
 
+#if defined(PSA_WANT_ALG_JPAKE) && \
+    defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC) && \
+    defined(PSA_WANT_ECC_SECP_R1_256) && defined(PSA_WANT_ALG_SHA_256)
+
 /* The only two JPAKE user/peer identifiers supported for the time being. */
 static const uint8_t jpake_server_id[] = { 's', 'e', 'r', 'v', 'e', 'r' };
 static const uint8_t jpake_client_id[] = { 'c', 'l', 'i', 'e', 'n', 't' };
 
-#if defined(PSA_WANT_ALG_JPAKE) && \
-    defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC) && \
-    defined(PSA_WANT_ECC_SECP_R1_256) && defined(PSA_WANT_ALG_SHA_256)
 static void ecjpake_do_round(psa_algorithm_t alg, unsigned int primitive,
                              psa_pake_operation_t *server,
                              psa_pake_operation_t *client,
@@ -437,6 +438,11 @@
     mbedtls_mpi_init(&D);
     mbedtls_mpi_init(&C);
     mbedtls_mpi_init(&X);
+#else /* MBEDTLS_BIGNUM_C */
+    (void) alg;
+    (void) private_exponent;
+    (void) input_data;
+    (void) buf;
 #endif /* MBEDTLS_BIGNUM_C */
 
     int ok = 0;
@@ -843,7 +849,7 @@
 {
     psa_key_lifetime_t lifetime =
         PSA_KEY_LIFETIME_FROM_PERSISTENCE_AND_LOCATION( \
-            PSA_KEY_PERSISTENCE_DEFAULT, location);
+            PSA_KEY_PERSISTENCE_VOLATILE, location);
     mbedtls_svc_key_id_t id = mbedtls_svc_key_id_make(owner_id_arg, id_arg);
     psa_status_t force_status = force_status_arg;
     psa_status_t expected_status = expected_status_arg;
diff --git a/tests/suites/test_suite_psa_crypto_memory.function b/tests/suites/test_suite_psa_crypto_memory.function
index 55c0092..50539e8 100644
--- a/tests/suites/test_suite_psa_crypto_memory.function
+++ b/tests/suites/test_suite_psa_crypto_memory.function
@@ -107,7 +107,10 @@
 
 exit:
     mbedtls_free(local_input.buffer);
-    mbedtls_free(input);
+
+    if (local_input.buffer != input) {
+        mbedtls_free(input);
+    }
 }
 /* END_CASE */
 
@@ -243,7 +246,7 @@
     TEST_CALLOC(buffer_copy_for_comparison, local_output.length);
     memcpy(buffer_copy_for_comparison, local_output.buffer, local_output.length);
 
-    psa_crypto_local_output_free(&local_output);
+    TEST_EQUAL(psa_crypto_local_output_free(&local_output), PSA_SUCCESS);
     TEST_ASSERT(local_output.buffer == NULL);
     TEST_EQUAL(local_output.length, 0);
 
diff --git a/tests/suites/test_suite_psa_crypto_storage_format.function b/tests/suites/test_suite_psa_crypto_storage_format.function
index efaaba5..5788742 100644
--- a/tests/suites/test_suite_psa_crypto_storage_format.function
+++ b/tests/suites/test_suite_psa_crypto_storage_format.function
@@ -1,14 +1,16 @@
 /* BEGIN_HEADER */
 
 #include <psa/crypto.h>
+#include <psa_crypto_storage.h>
 
 #include <test/psa_crypto_helpers.h>
 #include <test/psa_exercise_key.h>
 
 #include <psa_crypto_its.h>
 
-#define TEST_FLAG_EXERCISE      0x00000001
-#define TEST_FLAG_READ_ONLY     0x00000002
+#define TEST_FLAG_EXERCISE              0x00000001
+#define TEST_FLAG_READ_ONLY             0x00000002
+#define TEST_FLAG_OVERSIZED_KEY         0x00000004
 
 /** Write a key with the given attributes and key material to storage.
  * Test that it has the expected representation.
@@ -158,6 +160,12 @@
     /* Prime the storage with a key file. */
     PSA_ASSERT(psa_its_set(uid, representation->len, representation->x, 0));
 
+    if (flags & TEST_FLAG_OVERSIZED_KEY) {
+        TEST_EQUAL(psa_get_key_attributes(key_id, &actual_attributes), PSA_ERROR_DATA_INVALID);
+        ok = 1;
+        goto exit;
+    }
+
     /* Check that the injected key exists and looks as expected. */
     PSA_ASSERT(psa_get_key_attributes(key_id, &actual_attributes));
     TEST_ASSERT(mbedtls_svc_key_id_equal(key_id,
@@ -281,6 +289,7 @@
     mbedtls_svc_key_id_t key_id = mbedtls_svc_key_id_make(0, 1);
     psa_storage_uid_t uid = 1;
     psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
+    uint8_t *custom_key_data = NULL, *custom_storage_data = NULL;
 
     PSA_INIT();
     TEST_USES_KEY_ID(key_id);
@@ -293,6 +302,23 @@
     psa_set_key_algorithm(&attributes, alg);
     psa_set_key_enrollment_algorithm(&attributes, alg2);
 
+    /* Create a persistent key which is intentionally larger than the specified
+     * bit size. */
+    if (flags & TEST_FLAG_OVERSIZED_KEY) {
+        TEST_CALLOC(custom_key_data, PSA_BITS_TO_BYTES(bits));
+        memset(custom_key_data, 0xAA, PSA_BITS_TO_BYTES(bits));
+        material->len = PSA_BITS_TO_BYTES(bits);
+        material->x = custom_key_data;
+
+        /* 36 bytes are the overhead of psa_persistent_key_storage_format */
+        TEST_CALLOC(custom_storage_data, PSA_BITS_TO_BYTES(bits) + 36);
+        representation->len = PSA_BITS_TO_BYTES(bits) + 36;
+        representation->x = custom_storage_data;
+
+        psa_format_key_data_for_storage(custom_key_data, PSA_BITS_TO_BYTES(bits),
+                                        &attributes, custom_storage_data);
+    }
+
     /* Test that we can use a key with the given representation. This
      * guarantees backward compatibility with keys that were stored by
      * past versions of Mbed TLS. */
@@ -300,6 +326,8 @@
                               uid, representation, flags));
 
 exit:
+    mbedtls_free(custom_key_data);
+    mbedtls_free(custom_storage_data);
     psa_reset_key_attributes(&attributes);
     PSA_DONE();
 }
diff --git a/tests/suites/test_suite_psa_crypto_storage_format.misc.data b/tests/suites/test_suite_psa_crypto_storage_format.misc.data
index 48e3804..359053e 100644
--- a/tests/suites/test_suite_psa_crypto_storage_format.misc.data
+++ b/tests/suites/test_suite_psa_crypto_storage_format.misc.data
@@ -9,3 +9,9 @@
 PSA storage save: AES-GCM+CTR
 depends_on:PSA_WANT_KEY_TYPE_AES
 key_storage_save:PSA_KEY_LIFETIME_PERSISTENT:PSA_KEY_TYPE_AES:128:PSA_KEY_USAGE_EXPORT | PSA_KEY_USAGE_ENCRYPT:PSA_ALG_GCM:PSA_ALG_CTR:"404142434445464748494a4b4c4d4e4f":"505341004b45590000000000010000000024800001010000000250050010c00410000000404142434445464748494a4b4c4d4e4f"
+
+# Create a persistent key which is larger than MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE
+# so that when psa_get_key_attributes() tries to load it from the storage it will fail.
+PSA storage read: key larger than MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE
+depends_on:PSA_WANT_KEY_TYPE_RAW_DATA:MBEDTLS_PSA_STATIC_KEY_SLOTS
+key_storage_read:PSA_KEY_LIFETIME_PERSISTENT:PSA_KEY_TYPE_RAW_DATA:PSA_BYTES_TO_BITS(MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE + 1):PSA_KEY_USAGE_EXPORT:PSA_ALG_NONE:PSA_ALG_NONE:"":"":TEST_FLAG_OVERSIZED_KEY
diff --git a/tests/suites/test_suite_version.data b/tests/suites/test_suite_version.data
index 670e06b..cc71a4e 100644
--- a/tests/suites/test_suite_version.data
+++ b/tests/suites/test_suite_version.data
@@ -1,8 +1,8 @@
 Check compile time library version
-check_compiletime_version:"3.6.1"
+check_compiletime_version:"3.6.2"
 
 Check runtime library version
-check_runtime_version:"3.6.1"
+check_runtime_version:"3.6.2"
 
 Check for MBEDTLS_VERSION_C
 check_feature:"MBEDTLS_VERSION_C":0
diff --git a/tests/suites/test_suite_x509write.function b/tests/suites/test_suite_x509write.function
index 2762b0f..81816fe 100644
--- a/tests/suites/test_suite_x509write.function
+++ b/tests/suites/test_suite_x509write.function
@@ -287,21 +287,24 @@
                            int cert_type)
 {
     mbedtls_pk_context key;
+    mbedtls_pk_init(&key);
+
     mbedtls_svc_key_id_t key_id = MBEDTLS_SVC_KEY_ID_INIT;
     psa_key_attributes_t key_attr = PSA_KEY_ATTRIBUTES_INIT;
+
     mbedtls_x509write_csr req;
+    mbedtls_x509write_csr_init(&req);
+
     unsigned char buf[4096];
     int ret;
     size_t pem_len = 0;
     const char *subject_name = "C=NL,O=PolarSSL,CN=PolarSSL Server 1";
     mbedtls_test_rnd_pseudo_info rnd_info;
 
-    mbedtls_x509write_csr_init(&req);
     MD_OR_USE_PSA_INIT();
 
     memset(&rnd_info, 0x2a, sizeof(mbedtls_test_rnd_pseudo_info));
 
-    mbedtls_pk_init(&key);
     TEST_ASSERT(mbedtls_pk_parse_keyfile(&key, key_file, NULL,
                                          mbedtls_test_rnd_std_rand, NULL) == 0);