Merge pull request #4695 from yutotakano/fix-ssl-opt.sh-hard-abort
ssl-opt.sh: Skip tests instead of conditional hard abort
diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index 4f0a60e..ba5a217 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -242,6 +242,17 @@
fi
}
+requires_config_value_equals() {
+ VAL=$( get_config_value_or_default "$1" )
+ if [ -z "$VAL" ]; then
+ # Should never happen
+ echo "Mbed TLS configuration $1 is not defined"
+ exit 1
+ elif [ "$VAL" -ne "$2" ]; then
+ SKIP_NEXT="YES"
+ fi
+}
+
# Space-separated list of ciphersuites supported by this build of
# Mbed TLS.
P_CIPHERSUITES=" $($P_CLI --help 2>/dev/null |
@@ -287,6 +298,12 @@
fi
}
+# skip next test if either IN_CONTENT_LEN or MAX_CONTENT_LEN are below a value
+requires_max_content_len() {
+ requires_config_value_at_least "MBEDTLS_SSL_IN_CONTENT_LEN" $1
+ requires_config_value_at_least "MBEDTLS_SSL_OUT_CONTENT_LEN" $1
+}
+
# skip next test if GnuTLS isn't available
requires_gnutls() {
if [ -z "${GNUTLS_AVAILABLE:-}" ]; then
@@ -366,9 +383,10 @@
# Calculate the input & output maximum content lengths set in the config
MAX_CONTENT_LEN=16384
-MAX_IN_LEN=$( ../scripts/config.py get MBEDTLS_SSL_IN_CONTENT_LEN || echo "$MAX_CONTENT_LEN")
-MAX_OUT_LEN=$( ../scripts/config.py get MBEDTLS_SSL_OUT_CONTENT_LEN || echo "$MAX_CONTENT_LEN")
+MAX_IN_LEN=$( get_config_value_or_default "MBEDTLS_SSL_IN_CONTENT_LEN" )
+MAX_OUT_LEN=$( get_config_value_or_default "MBEDTLS_SSL_OUT_CONTENT_LEN" )
+# Calculate the maximum content length that fits both
if [ "$MAX_IN_LEN" -lt "$MAX_CONTENT_LEN" ]; then
MAX_CONTENT_LEN="$MAX_IN_LEN"
fi
@@ -2226,8 +2244,12 @@
-c "ignoring unexpected CID" \
-s "ignoring unexpected CID"
+# This and the test below it require MAX_CONTENT_LEN to be at least MFL+1, because the
+# tests check that the buffer contents are reallocated when the message is
+# larger than the buffer.
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+requires_max_content_len 513
run_test "Connection ID: Cli+Srv enabled, variable buffer lengths, MFL=512" \
"$P_SRV dtls=1 cid=1 cid_val=dead debug_level=2" \
"$P_CLI force_ciphersuite="TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" max_frag_len=512 dtls=1 cid=1 cid_val=beef" \
@@ -2241,6 +2263,7 @@
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+requires_max_content_len 1025
run_test "Connection ID: Cli+Srv enabled, variable buffer lengths, MFL=1024" \
"$P_SRV dtls=1 cid=1 cid_val=dead debug_level=2" \
"$P_CLI force_ciphersuite="TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" max_frag_len=1024 dtls=1 cid=1 cid_val=beef" \
@@ -2748,20 +2771,6 @@
# Tests for Max Fragment Length extension
-if [ "$MAX_IN_LEN" -lt "4096" ]; then
- printf '%s defines MBEDTLS_SSL_IN_CONTENT_LEN to be less than 4096. Fragment length tests will fail.\n' "${CONFIG_H}"
- exit 1
-fi
-
-if [ "$MAX_OUT_LEN" -lt "4096" ]; then
- printf '%s defines MBEDTLS_SSL_OUT_CONTENT_LEN to be less than 4096. Fragment length tests will fail.\n' "${CONFIG_H}"
- exit 1
-fi
-
-if [ $MAX_CONTENT_LEN -ne 16384 ]; then
- echo "Using non-default maximum content length $MAX_CONTENT_LEN"
-fi
-
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: enabled, default" \
"$P_SRV debug_level=3" \
@@ -2826,7 +2835,7 @@
-s "1 bytes read"
requires_config_disabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
-run_test "Max fragment length DTLS: disabled, larger message" \
+run_test "Max fragment length, DTLS: disabled, larger message" \
"$P_SRV debug_level=3 dtls=1" \
"$P_CLI debug_level=3 dtls=1 request_size=$(( $MAX_CONTENT_LEN + 1))" \
1 \
@@ -2836,6 +2845,7 @@
-S "Maximum outgoing record payload length is 16384" \
-c "fragment larger than.*maximum "
+requires_max_content_len 4096
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: used by client" \
"$P_SRV debug_level=3" \
@@ -2850,6 +2860,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 1024
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 512, server 1024" \
"$P_SRV debug_level=3 max_frag_len=1024" \
@@ -2864,6 +2875,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 2048
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 512, server 2048" \
"$P_SRV debug_level=3 max_frag_len=2048" \
@@ -2878,6 +2890,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 4096
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 512, server 4096" \
"$P_SRV debug_level=3 max_frag_len=4096" \
@@ -2892,6 +2905,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 1024
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 1024, server 512" \
"$P_SRV debug_level=3 max_frag_len=512" \
@@ -2906,6 +2920,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 2048
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 1024, server 2048" \
"$P_SRV debug_level=3 max_frag_len=2048" \
@@ -2920,6 +2935,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 4096
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 1024, server 4096" \
"$P_SRV debug_level=3 max_frag_len=4096" \
@@ -2934,6 +2950,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 2048
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 2048, server 512" \
"$P_SRV debug_level=3 max_frag_len=512" \
@@ -2948,6 +2965,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 2048
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 2048, server 1024" \
"$P_SRV debug_level=3 max_frag_len=1024" \
@@ -2962,6 +2980,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 4096
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 2048, server 4096" \
"$P_SRV debug_level=3 max_frag_len=4096" \
@@ -2976,6 +2995,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 4096
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 4096, server 512" \
"$P_SRV debug_level=3 max_frag_len=512" \
@@ -2990,6 +3010,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 4096
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 4096, server 1024" \
"$P_SRV debug_level=3 max_frag_len=1024" \
@@ -3004,6 +3025,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 4096
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 4096, server 2048" \
"$P_SRV debug_level=3 max_frag_len=2048" \
@@ -3018,6 +3040,7 @@
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 4096
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: used by server" \
"$P_SRV debug_level=3 max_frag_len=4096" \
@@ -3032,6 +3055,7 @@
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension"
+requires_max_content_len 4096
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
requires_gnutls
run_test "Max fragment length: gnutls server" \
@@ -3043,6 +3067,7 @@
-c "client hello, adding max_fragment_length extension" \
-c "found max_fragment_length extension"
+requires_max_content_len 2048
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client, message just fits" \
"$P_SRV debug_level=3" \
@@ -3059,6 +3084,7 @@
-c "2048 bytes written in 1 fragments" \
-s "2048 bytes read"
+requires_max_content_len 2048
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client, larger message" \
"$P_SRV debug_level=3" \
@@ -3076,6 +3102,7 @@
-s "2048 bytes read" \
-s "297 bytes read"
+requires_max_content_len 2048
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: DTLS client, larger message" \
"$P_SRV debug_level=3 dtls=1" \
@@ -3187,6 +3214,7 @@
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_max_content_len 2048
run_test "Renegotiation with max fragment length: client 2048, server 512" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1 max_frag_len=512" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 max_frag_len=2048 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
@@ -3871,24 +3899,17 @@
-c "skip write certificate verify" \
-c "! mbedtls_ssl_handshake returned"
-# The "max_int chain" tests assume that MAX_INTERMEDIATE_CA is set to its
-# default value (8)
+# This script assumes that MBEDTLS_X509_MAX_INTERMEDIATE_CA has its default
+# value, defined here as MAX_IM_CA. Some test cases will be skipped if the
+# library is configured with a different value.
MAX_IM_CA='8'
-MAX_IM_CA_CONFIG=$( ../scripts/config.py get MBEDTLS_X509_MAX_INTERMEDIATE_CA)
-if [ -n "$MAX_IM_CA_CONFIG" ] && [ "$MAX_IM_CA_CONFIG" -ne "$MAX_IM_CA" ]; then
- cat <<EOF
-${CONFIG_H} contains a value for the configuration of
-MBEDTLS_X509_MAX_INTERMEDIATE_CA that is different from the script's
-test value of ${MAX_IM_CA}.
-
-The tests assume this value and if it changes, the tests in this
-script should also be adjusted.
-EOF
- exit 1
-fi
-
+# The tests for the max_int tests can pass with any number higher than MAX_IM_CA
+# because only a chain of MAX_IM_CA length is tested. Equally, the max_int+1
+# tests can pass with any number less than MAX_IM_CA. However, stricter preconditions
+# are in place so that the semantics are consistent with the test description.
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
run_test "Authentication: server max_int chain, client default" \
"$P_SRV crt_file=data_files/dir-maxpath/c09.pem \
@@ -3897,6 +3918,7 @@
0 \
-C "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
run_test "Authentication: server max_int+1 chain, client default" \
"$P_SRV crt_file=data_files/dir-maxpath/c10.pem \
@@ -3905,6 +3927,7 @@
1 \
-c "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
run_test "Authentication: server max_int+1 chain, client optional" \
"$P_SRV crt_file=data_files/dir-maxpath/c10.pem \
@@ -3914,6 +3937,7 @@
1 \
-c "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
run_test "Authentication: server max_int+1 chain, client none" \
"$P_SRV crt_file=data_files/dir-maxpath/c10.pem \
@@ -3923,6 +3947,7 @@
0 \
-C "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
run_test "Authentication: client max_int+1 chain, server default" \
"$P_SRV ca_file=data_files/dir-maxpath/00.crt" \
@@ -3931,6 +3956,7 @@
0 \
-S "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
run_test "Authentication: client max_int+1 chain, server optional" \
"$P_SRV ca_file=data_files/dir-maxpath/00.crt auth_mode=optional" \
@@ -3939,6 +3965,7 @@
1 \
-s "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
run_test "Authentication: client max_int+1 chain, server required" \
"$P_SRV ca_file=data_files/dir-maxpath/00.crt auth_mode=required" \
@@ -3947,6 +3974,7 @@
1 \
-s "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
run_test "Authentication: client max_int chain, server required" \
"$P_SRV ca_file=data_files/dir-maxpath/00.crt auth_mode=required" \
@@ -4124,6 +4152,7 @@
-C "! mbedtls_ssl_handshake returned" \
-S "X509 - Certificate verification failed"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
run_test "Authentication, CA callback: server max_int chain, client default" \
@@ -4134,6 +4163,7 @@
-c "use CA callback for X.509 CRT verification" \
-C "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
run_test "Authentication, CA callback: server max_int+1 chain, client default" \
@@ -4144,6 +4174,7 @@
-c "use CA callback for X.509 CRT verification" \
-c "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
run_test "Authentication, CA callback: server max_int+1 chain, client optional" \
@@ -4155,6 +4186,7 @@
-c "use CA callback for X.509 CRT verification" \
-c "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
run_test "Authentication, CA callback: client max_int+1 chain, server optional" \
@@ -4165,6 +4197,7 @@
-s "use CA callback for X.509 CRT verification" \
-s "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
run_test "Authentication, CA callback: client max_int+1 chain, server required" \
@@ -4175,6 +4208,7 @@
-s "use CA callback for X.509 CRT verification" \
-s "X509 - A fatal error occurred"
+requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
requires_full_size_output_buffer
requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
run_test "Authentication, CA callback: client max_int chain, server required" \
@@ -5724,6 +5758,7 @@
-c "16384 bytes written in $(fragments_for_write 16384) fragments" \
-s "Read from client: $MAX_CONTENT_LEN bytes read"
+# The tests below fail when the server's OUT_CONTENT_LEN is less than 16384.
run_test "Large server packet TLS 1.2 BlockCipher" \
"$P_SRV response_size=16384" \
"$P_CLI force_version=tls1_2 \
@@ -6546,6 +6581,7 @@
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_max_content_len 4096
run_test "DTLS fragmenting: none (for reference)" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
crt_file=data_files/server7_int-ca.crt \
@@ -6566,6 +6602,7 @@
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_max_content_len 2048
run_test "DTLS fragmenting: server only (max_frag_len)" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
crt_file=data_files/server7_int-ca.crt \
@@ -6590,6 +6627,7 @@
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_max_content_len 4096
run_test "DTLS fragmenting: server only (more) (max_frag_len)" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
crt_file=data_files/server7_int-ca.crt \
@@ -6610,6 +6648,7 @@
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_max_content_len 2048
run_test "DTLS fragmenting: client-initiated, server only (max_frag_len)" \
"$P_SRV dtls=1 debug_level=2 auth_mode=none \
crt_file=data_files/server7_int-ca.crt \
@@ -6637,6 +6676,7 @@
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_max_content_len 2048
run_test "DTLS fragmenting: client-initiated, server only (max_frag_len), proxy MTU" \
-p "$P_PXY mtu=1110" \
"$P_SRV dtls=1 debug_level=2 auth_mode=none \
@@ -6658,6 +6698,7 @@
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_max_content_len 2048
run_test "DTLS fragmenting: client-initiated, both (max_frag_len)" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
crt_file=data_files/server7_int-ca.crt \
@@ -6685,6 +6726,7 @@
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_max_content_len 2048
run_test "DTLS fragmenting: client-initiated, both (max_frag_len), proxy MTU" \
-p "$P_PXY mtu=1110" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -6705,6 +6747,7 @@
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
+requires_max_content_len 4096
run_test "DTLS fragmenting: none (for reference) (MTU)" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
crt_file=data_files/server7_int-ca.crt \
@@ -6724,6 +6767,7 @@
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
+requires_max_content_len 4096
run_test "DTLS fragmenting: client (MTU)" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
crt_file=data_files/server7_int-ca.crt \
@@ -6743,6 +6787,7 @@
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: server (MTU)" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
crt_file=data_files/server7_int-ca.crt \
@@ -6762,6 +6807,7 @@
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: both (MTU=1024)" \
-p "$P_PXY mtu=1024" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -6787,6 +6833,7 @@
requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_GCM_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: both (MTU=512)" \
-p "$P_PXY mtu=512" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -6818,6 +6865,7 @@
requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_GCM_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU: auto-reduction (not valgrind)" \
-p "$P_PXY mtu=508" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -6842,6 +6890,7 @@
requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_GCM_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU: auto-reduction (with valgrind)" \
-p "$P_PXY mtu=508" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -6865,6 +6914,7 @@
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU, simple handshake (MTU=1024)" \
-p "$P_PXY mtu=1024" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -6894,6 +6944,7 @@
requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_GCM_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU, simple handshake (MTU=512)" \
-p "$P_PXY mtu=512" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -6917,6 +6968,7 @@
requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU, simple handshake, nbio (MTU=1024)" \
-p "$P_PXY mtu=1024" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -6943,6 +6995,7 @@
requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_GCM_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU, simple handshake, nbio (MTU=512)" \
-p "$P_PXY mtu=512" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -6979,6 +7032,7 @@
requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_GCM_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU, resumed handshake" \
-p "$P_PXY mtu=1450" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7008,6 +7062,7 @@
requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
requires_config_enabled MBEDTLS_CHACHAPOLY_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU, ChachaPoly renego" \
-p "$P_PXY mtu=512" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7040,6 +7095,7 @@
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_GCM_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU, AES-GCM renego" \
-p "$P_PXY mtu=512" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7072,6 +7128,7 @@
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_CCM_C
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU, AES-CCM renego" \
-p "$P_PXY mtu=1024" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7105,6 +7162,7 @@
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
requires_config_enabled MBEDTLS_SSL_ENCRYPT_THEN_MAC
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU, AES-CBC EtM renego" \
-p "$P_PXY mtu=1024" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7137,6 +7195,7 @@
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU, AES-CBC non-EtM renego" \
-p "$P_PXY mtu=1024" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7166,6 +7225,7 @@
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_GCM_C
client_needs_more_time 2
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU + 3d" \
-p "$P_PXY mtu=512 drop=8 delay=8 duplicate=8" \
"$P_SRV dgram_packing=0 dtls=1 debug_level=2 auth_mode=required \
@@ -7190,6 +7250,7 @@
requires_config_enabled MBEDTLS_AES_C
requires_config_enabled MBEDTLS_GCM_C
client_needs_more_time 2
+requires_max_content_len 2048
run_test "DTLS fragmenting: proxy MTU + 3d, nbio" \
-p "$P_PXY mtu=512 drop=8 delay=8 duplicate=8" \
"$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7215,6 +7276,7 @@
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
requires_gnutls
+requires_max_content_len 2048
run_test "DTLS fragmenting: gnutls server, DTLS 1.2" \
"$G_SRV -u" \
"$P_CLI dtls=1 debug_level=2 \
@@ -7238,6 +7300,7 @@
requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
requires_gnutls
requires_not_i686
+requires_max_content_len 2048
run_test "DTLS fragmenting: gnutls client, DTLS 1.2" \
"$P_SRV dtls=1 debug_level=2 \
crt_file=data_files/server7_int-ca.crt \
@@ -7251,6 +7314,7 @@
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
+requires_max_content_len 2048
run_test "DTLS fragmenting: openssl server, DTLS 1.2" \
"$O_SRV -dtls1_2 -verify 10" \
"$P_CLI dtls=1 debug_level=2 \
@@ -7265,6 +7329,7 @@
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
+requires_max_content_len 2048
run_test "DTLS fragmenting: openssl client, DTLS 1.2" \
"$P_SRV dtls=1 debug_level=2 \
crt_file=data_files/server7_int-ca.crt \
@@ -7284,6 +7349,7 @@
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
client_needs_more_time 4
+requires_max_content_len 2048
run_test "DTLS fragmenting: 3d, gnutls server, DTLS 1.2" \
-p "$P_PXY drop=8 delay=8 duplicate=8" \
"$G_NEXT_SRV -u" \
@@ -7301,6 +7367,7 @@
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
client_needs_more_time 4
+requires_max_content_len 2048
run_test "DTLS fragmenting: 3d, gnutls client, DTLS 1.2" \
-p "$P_PXY drop=8 delay=8 duplicate=8" \
"$P_SRV dtls=1 debug_level=2 \
@@ -7322,6 +7389,7 @@
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
client_needs_more_time 4
+requires_max_content_len 2048
run_test "DTLS fragmenting: 3d, openssl server, DTLS 1.2" \
-p "$P_PXY drop=8 delay=8 duplicate=8" \
"$O_SRV -dtls1_2 -verify 10" \
@@ -7339,6 +7407,7 @@
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
client_needs_more_time 4
+requires_max_content_len 2048
run_test "DTLS fragmenting: 3d, openssl client, DTLS 1.2" \
-p "$P_PXY drop=8 delay=8 duplicate=8" \
"$P_SRV dtls=1 debug_level=2 \
@@ -8413,6 +8482,7 @@
requires_config_enabled MBEDTLS_MEMORY_DEBUG
requires_config_enabled MBEDTLS_MEMORY_BUFFER_ALLOC_C
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_max_content_len 16384
run_tests_memory_after_hanshake
# Final report