diff --git a/include/mbedtls/bignum.h b/include/mbedtls/bignum.h
index 47768fc..74deecf 100644
--- a/include/mbedtls/bignum.h
+++ b/include/mbedtls/bignum.h
@@ -872,6 +872,44 @@
                      int (*f_rng)(void *, unsigned char *, size_t),
                      void *p_rng );
 
+/** Generate a random number uniformly in a range.
+ *
+ * This function generates a random number between \p min inclusive and
+ * \p N exclusive.
+ *
+ * The procedure complies with RFC 6979 §3.3 (deterministic ECDSA)
+ * when the RNG is a suitably parametrized instance of HMAC_DRBG
+ * and \p min is \c 1.
+ *
+ * \note           There are `N - min` possible outputs. The lower bound
+ *                 \p min can be reached, but the upper bound \p N cannot.
+ *
+ * \param X        The destination MPI. This must point to an initialized MPI.
+ * \param min      The minimum value to return.
+ *                 It must be nonnegative.
+ * \param N        The upper bound of the range, exclusive.
+ *                 In other words, this is one plus the maximum value to return.
+ *                 \p N must be strictly larger than \p min.
+ * \param f_rng    The RNG function to use. This must not be \c NULL.
+ * \param p_rng    The RNG parameter to be passed to \p f_rng.
+ *
+ * \return         \c 0 if successful.
+ * \return         #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed.
+ * \return         #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p min or \p N is invalid
+ *                 or if they are incompatible.
+ * \return         #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if the implementation was
+ *                 unable to find a suitable value within a limited number
+ *                 of attempts. This has a negligible probability if \p N
+ *                 is significantly larger than \p min, which is the case
+ *                 for all usual cryptographic applications.
+ * \return         Another negative error code on failure.
+ */
+int mbedtls_mpi_random( mbedtls_mpi *X,
+                        mbedtls_mpi_sint min,
+                        const mbedtls_mpi *N,
+                        int (*f_rng)(void *, unsigned char *, size_t),
+                        void *p_rng );
+
 /**
  * \brief          Compute the greatest common divisor: G = gcd(A, B)
  *
diff --git a/include/mbedtls/ccm.h b/include/mbedtls/ccm.h
index 2fa4b5b..98f5693 100644
--- a/include/mbedtls/ccm.h
+++ b/include/mbedtls/ccm.h
@@ -56,6 +56,11 @@
 
 #include "mbedtls/cipher.h"
 
+#define MBEDTLS_CCM_DECRYPT       0
+#define MBEDTLS_CCM_ENCRYPT       1
+#define MBEDTLS_CCM_STAR_DECRYPT  2
+#define MBEDTLS_CCM_STAR_ENCRYPT  3
+
 #define MBEDTLS_ERR_CCM_BAD_INPUT       -0x000D /**< Bad input parameters to the function. */
 #define MBEDTLS_ERR_CCM_AUTH_FAILED     -0x000F /**< Authenticated decryption failed. */
 
@@ -134,10 +139,10 @@
  * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
  *                  or 13. The length L of the message length field is
  *                  15 - \p iv_len.
- * \param add       The additional data field. If \p add_len is greater than
- *                  zero, \p add must be a readable buffer of at least that
+ * \param ad        The additional data field. If \p ad_len is greater than
+ *                  zero, \p ad must be a readable buffer of at least that
  *                  length.
- * \param add_len   The length of additional data in Bytes.
+ * \param ad_len    The length of additional data in Bytes.
  *                  This must be less than `2^16 - 2^8`.
  * \param input     The buffer holding the input data. If \p length is greater
  *                  than zero, \p input must be a readable buffer of at least
@@ -155,7 +160,7 @@
  */
 int mbedtls_ccm_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length,
                          const unsigned char *iv, size_t iv_len,
-                         const unsigned char *add, size_t add_len,
+                         const unsigned char *ad, size_t ad_len,
                          const unsigned char *input, unsigned char *output,
                          unsigned char *tag, size_t tag_len );
 
@@ -180,9 +185,9 @@
  * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
  *                  or 13. The length L of the message length field is
  *                  15 - \p iv_len.
- * \param add       The additional data field. This must be a readable buffer of
- *                  at least \p add_len Bytes.
- * \param add_len   The length of additional data in Bytes.
+ * \param ad        The additional data field. This must be a readable buffer of
+ *                  at least \p ad_len Bytes.
+ * \param ad_len    The length of additional data in Bytes.
  *                  This must be less than 2^16 - 2^8.
  * \param input     The buffer holding the input data. If \p length is greater
  *                  than zero, \p input must be a readable buffer of at least
@@ -203,7 +208,7 @@
  */
 int mbedtls_ccm_star_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length,
                          const unsigned char *iv, size_t iv_len,
-                         const unsigned char *add, size_t add_len,
+                         const unsigned char *ad, size_t ad_len,
                          const unsigned char *input, unsigned char *output,
                          unsigned char *tag, size_t tag_len );
 
@@ -219,9 +224,9 @@
  * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
  *                  or 13. The length L of the message length field is
  *                  15 - \p iv_len.
- * \param add       The additional data field. This must be a readable buffer
- *                  of at least that \p add_len Bytes..
- * \param add_len   The length of additional data in Bytes.
+ * \param ad        The additional data field. This must be a readable buffer
+ *                  of at least that \p ad_len Bytes..
+ * \param ad_len    The length of additional data in Bytes.
  *                  This must be less than 2^16 - 2^8.
  * \param input     The buffer holding the input data. If \p length is greater
  *                  than zero, \p input must be a readable buffer of at least
@@ -240,7 +245,7 @@
  */
 int mbedtls_ccm_auth_decrypt( mbedtls_ccm_context *ctx, size_t length,
                       const unsigned char *iv, size_t iv_len,
-                      const unsigned char *add, size_t add_len,
+                      const unsigned char *ad, size_t ad_len,
                       const unsigned char *input, unsigned char *output,
                       const unsigned char *tag, size_t tag_len );
 
@@ -261,9 +266,9 @@
  * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
  *                  or 13. The length L of the message length field is
  *                  15 - \p iv_len.
- * \param add       The additional data field. This must be a readable buffer of
- *                  at least that \p add_len Bytes.
- * \param add_len   The length of additional data in Bytes.
+ * \param ad        The additional data field. This must be a readable buffer of
+ *                  at least that \p ad_len Bytes.
+ * \param ad_len    The length of additional data in Bytes.
  *                  This must be less than 2^16 - 2^8.
  * \param input     The buffer holding the input data. If \p length is greater
  *                  than zero, \p input must be a readable buffer of at least
@@ -285,10 +290,208 @@
  */
 int mbedtls_ccm_star_auth_decrypt( mbedtls_ccm_context *ctx, size_t length,
                       const unsigned char *iv, size_t iv_len,
-                      const unsigned char *add, size_t add_len,
+                      const unsigned char *ad, size_t ad_len,
                       const unsigned char *input, unsigned char *output,
                       const unsigned char *tag, size_t tag_len );
 
+/**
+ * \brief           This function starts a CCM encryption or decryption
+ *                  operation.
+ *
+ *                  This function and mbedtls_ccm_set_lengths() must be called
+ *                  before calling mbedtls_ccm_update_ad() or
+ *                  mbedtls_ccm_update(). This function can be called before
+ *                  or after mbedtls_ccm_set_lengths().
+ *
+ * \note            This function is not implemented in Mbed TLS yet.
+ *
+ * \param ctx       The CCM context. This must be initialized.
+ * \param mode      The operation to perform: #MBEDTLS_CCM_ENCRYPT or
+ *                  #MBEDTLS_CCM_DECRYPT or #MBEDTLS_CCM_STAR_ENCRYPT or
+ *                  #MBEDTLS_CCM_STAR_DECRYPT.
+ * \param iv        The initialization vector. This must be a readable buffer
+ *                  of at least \p iv_len Bytes.
+ * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
+ *                  or 13. The length L of the message length field is
+ *                  15 - \p iv_len.
+ *
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_CCM_BAD_INPUT on failure:
+ *                  \p ctx is in an invalid state,
+ *                  \p mode is invalid,
+ *                  \p iv_len is invalid (lower than \c 7 or greater than
+ *                  \c 13).
+ */
+int mbedtls_ccm_starts( mbedtls_ccm_context *ctx,
+                        int mode,
+                        const unsigned char *iv,
+                        size_t iv_len );
+
+/**
+ * \brief           This function declares the lengths of the message
+ *                  and additional data for a CCM encryption or decryption
+ *                  operation.
+ *
+ *                  This function and mbedtls_ccm_starts() must be called
+ *                  before calling mbedtls_ccm_update_ad() or
+ *                  mbedtls_ccm_update(). This function can be called before
+ *                  or after mbedtls_ccm_starts().
+ *
+ * \note            This function is not implemented in Mbed TLS yet.
+ *
+ * \param ctx       The CCM context. This must be initialized.
+ * \param total_ad_len   The total length of additional data in bytes.
+ *                       This must be less than `2^16 - 2^8`.
+ * \param plaintext_len  The length in bytes of the plaintext to encrypt or
+ *                       result of the decryption (thus not encompassing the
+ *                       additional data that are not encrypted).
+ *
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_CCM_BAD_INPUT on failure:
+ *                  \p ctx is in an invalid state,
+ *                  \p total_ad_len is greater than \c 0xFF00.
+ */
+int mbedtls_ccm_set_lengths( mbedtls_ccm_context *ctx,
+                             size_t total_ad_len,
+                             size_t plaintext_len );
+
+/**
+ * \brief           This function feeds an input buffer as associated data
+ *                  (authenticated but not encrypted data) in a CCM
+ *                  encryption or decryption operation.
+ *
+ *                  You may call this function zero, one or more times
+ *                  to pass successive parts of the additional data. The
+ *                  lengths \p ad_len of the data parts should eventually add
+ *                  up exactly to the total length of additional data
+ *                  \c total_ad_len passed to mbedtls_ccm_set_lengths(). You
+ *                  may not call this function after calling
+ *                  mbedtls_ccm_update().
+ *
+ * \note            This function is not implemented in Mbed TLS yet.
+ *
+ * \param ctx       The CCM context. This must have been started with
+ *                  mbedtls_ccm_starts(), the lengths of the message and
+ *                  additional data must have been declared with
+ *                  mbedtls_ccm_set_lengths() and this must not have yet
+ *                  received any input with mbedtls_ccm_update().
+ * \param ad        The buffer holding the additional data, or \c NULL
+ *                  if \p ad_len is \c 0.
+ * \param ad_len    The length of the additional data. If \c 0,
+ *                  \p ad may be \c NULL.
+ *
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_CCM_BAD_INPUT on failure:
+ *                  \p ctx is in an invalid state,
+ *                  total input length too long.
+ */
+int mbedtls_ccm_update_ad( mbedtls_ccm_context *ctx,
+                           const unsigned char *ad,
+                           size_t ad_len );
+
+/**
+ * \brief           This function feeds an input buffer into an ongoing CCM
+ *                  encryption or decryption operation.
+ *
+ *                  You may call this function zero, one or more times
+ *                  to pass successive parts of the input: the plaintext to
+ *                  encrypt, or the ciphertext (not including the tag) to
+ *                  decrypt. After the last part of the input, call
+ *                  mbedtls_ccm_finish(). The lengths \p input_len of the
+ *                  data parts should eventually add up exactly to the
+ *                  plaintext length \c plaintext_len passed to
+ *                  mbedtls_ccm_set_lengths().
+ *
+ *                  This function may produce output in one of the following
+ *                  ways:
+ *                  - Immediate output: the output length is always equal
+ *                    to the input length.
+ *                  - Buffered output: except for the last part of input data,
+ *                    the output consists of a whole number of 16-byte blocks.
+ *                    If the total input length so far (not including
+ *                    associated data) is 16 \* *B* + *A* with *A* < 16 then
+ *                    the total output length is 16 \* *B*.
+ *                    For the last part of input data, the output length is
+ *                    equal to the input length plus the number of bytes (*A*)
+ *                    buffered in the previous call to the function (if any).
+ *                    The function uses the plaintext length
+ *                    \c plaintext_len passed to mbedtls_ccm_set_lengths()
+ *                    to detect the last part of input data.
+ *
+ *                  In particular:
+ *                  - It is always correct to call this function with
+ *                    \p output_size >= \p input_len + 15.
+ *                  - If \p input_len is a multiple of 16 for all the calls
+ *                    to this function during an operation (not necessary for
+ *                    the last one) then it is correct to use \p output_size
+ *                    =\p input_len.
+ *
+ * \note            This function is not implemented in Mbed TLS yet.
+ *
+ * \param ctx           The CCM context. This must have been started with
+ *                      mbedtls_ccm_starts() and the lengths of the message and
+ *                      additional data must have been declared with
+ *                      mbedtls_ccm_set_lengths().
+ * \param input         The buffer holding the input data. If \p input_len
+ *                      is greater than zero, this must be a readable buffer
+ *                      of at least \p input_len bytes.
+ * \param input_len     The length of the input data in bytes.
+ * \param output        The buffer for the output data. If \p output_size
+ *                      is greater than zero, this must be a writable buffer of
+ *                      at least \p output_size bytes.
+ * \param output_size   The size of the output buffer in bytes.
+ *                      See the function description regarding the output size.
+ * \param output_len    On success, \p *output_len contains the actual
+ *                      length of the output written in \p output.
+ *                      On failure, the content of \p *output_len is
+ *                      unspecified.
+ *
+ * \return         \c 0 on success.
+ * \return         #MBEDTLS_ERR_CCM_BAD_INPUT on failure:
+ *                 \p ctx is in an invalid state,
+ *                 total input length too long,
+ *                 or \p output_size too small.
+ */
+int mbedtls_ccm_update( mbedtls_ccm_context *ctx,
+                        const unsigned char *input, size_t input_len,
+                        unsigned char *output, size_t output_size,
+                        size_t *output_len );
+
+/**
+ * \brief           This function finishes the CCM operation and generates
+ *                  the authentication tag.
+ *
+ *                  It wraps up the CCM stream, and generates the
+ *                  tag. The tag can have a maximum length of 16 Bytes.
+ *
+ * \note            This function is not implemented in Mbed TLS yet.
+ *
+ * \param ctx       The CCM context. This must have been started with
+ *                  mbedtls_ccm_starts() and the lengths of the message and
+ *                  additional data must have been declared with
+ *                  mbedtls_ccm_set_lengths().
+ * \param tag       The buffer for holding the tag. If \p tag_len is greater
+ *                  than zero, this must be a writable buffer of at least \p
+ *                  tag_len Bytes.
+ * \param tag_len   The length of the tag to generate in Bytes:
+ *                  4, 6, 8, 10, 12, 14 or 16.
+ *                  For CCM*, zero is also valid.
+ *
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_CCM_BAD_INPUT on failure:
+ *                  \p ctx is in an invalid state,
+ *                  invalid value of \p tag_len,
+ *                  the total amount of additional data passed to
+ *                  mbedtls_ccm_update_ad() was lower than the total length of
+ *                  additional data \c total_ad_len passed to
+ *                  mbedtls_ccm_set_lengths(),
+ *                  the total amount of input data passed to
+ *                  mbedtls_ccm_update() was lower than the plaintext length
+ *                  \c plaintext_len passed to mbedtls_ccm_set_lengths().
+ */
+int mbedtls_ccm_finish( mbedtls_ccm_context *ctx,
+                        unsigned char *tag, size_t tag_len );
+
 #if defined(MBEDTLS_SELF_TEST) && defined(MBEDTLS_AES_C)
 /**
  * \brief          The CCM checkup routine.
diff --git a/include/mbedtls/check_config.h b/include/mbedtls/check_config.h
index ae23602..e066da7 100644
--- a/include/mbedtls/check_config.h
+++ b/include/mbedtls/check_config.h
@@ -130,16 +130,6 @@
 #error "MBEDTLS_ECP_RESTARTABLE defined, but it cannot coexist with an alternative or PSA-based ECP implementation"
 #endif
 
-#if defined(MBEDTLS_ECP_RESTARTABLE)           && \
-    ! defined(MBEDTLS_ECDH_LEGACY_CONTEXT)
-#error "MBEDTLS_ECP_RESTARTABLE defined, but not MBEDTLS_ECDH_LEGACY_CONTEXT"
-#endif
-
-#if defined(MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED)           && \
-    defined(MBEDTLS_ECDH_LEGACY_CONTEXT)
-#error "MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED defined, but MBEDTLS_ECDH_LEGACY_CONTEXT not disabled"
-#endif
-
 #if defined(MBEDTLS_ECDSA_DETERMINISTIC) && !defined(MBEDTLS_HMAC_DRBG_C)
 #error "MBEDTLS_ECDSA_DETERMINISTIC defined, but not all prerequisites"
 #endif
@@ -836,6 +826,14 @@
 #error "MBEDTLS_SSL_PROTO_TLS1_1 (TLS v1.1 support) was removed in Mbed TLS 3.0. See https://github.com/ARMmbed/mbedtls/issues/4286"
 #endif
 
+#if defined(MBEDTLS_SSL_CID_PADDING_GRANULARITY) //no-check-names
+#error "MBEDTLS_SSL_CID_PADDING_GRANULARITY was removed in Mbed TLS 3.0. See https://github.com/ARMmbed/mbedtls/issues/4335"
+#endif
+
+#if defined(MBEDTLS_SSL_TLS1_3_PADDING_GRANULARITY) //no-check-names
+#error "MBEDTLS_SSL_TLS1_3_PADDING_GRANULARITY was removed in Mbed TLS 3.0. See https://github.com/ARMmbed/mbedtls/issues/4335"
+#endif
+
 /*
  * Avoid warning from -pedantic. This is a convenient place for this
  * workaround since this is included by every single file before the
diff --git a/include/mbedtls/cipher.h b/include/mbedtls/cipher.h
index 97aa16c..25e1d8d 100644
--- a/include/mbedtls/cipher.h
+++ b/include/mbedtls/cipher.h
@@ -438,10 +438,23 @@
 
 
 /**
- * \brief               This function initializes a cipher context for
+ * \brief               This function prepares a cipher context for
  *                      use with the given cipher primitive.
  *
- * \param ctx           The context to initialize. This must be initialized.
+ * \note                After calling this function, you should call
+ *                      mbedtls_cipher_setkey() and, if the mode uses padding,
+ *                      mbedtls_cipher_set_padding_mode(), then for each
+ *                      message to encrypt or decrypt with this key, either:
+ *                      - mbedtls_cipher_crypt() for one-shot processing with
+ *                      non-AEAD modes;
+ *                      - mbedtls_cipher_auth_encrypt_ext() or
+ *                      mbedtls_cipher_auth_decrypt_ext() for one-shot
+ *                      processing with AEAD modes or NIST_KW;
+ *                      - for multi-part processing, see the documentation of
+ *                      mbedtls_cipher_reset().
+ *
+ * \param ctx           The context to prepare. This must be initialized by
+ *                      a call to mbedtls_cipher_init() first.
  * \param cipher_info   The cipher to use.
  *
  * \return              \c 0 on success.
@@ -449,10 +462,6 @@
  *                      parameter-verification failure.
  * \return              #MBEDTLS_ERR_CIPHER_ALLOC_FAILED if allocation of the
  *                      cipher-specific context fails.
- *
- * \internal Currently, the function also clears the structure.
- * In future versions, the caller will be required to call
- * mbedtls_cipher_init() on the structure first.
  */
 int mbedtls_cipher_setup( mbedtls_cipher_context_t *ctx,
                           const mbedtls_cipher_info_t *cipher_info );
@@ -688,7 +697,30 @@
 /**
  * \brief         This function resets the cipher state.
  *
- * \param ctx     The generic cipher context. This must be initialized.
+ * \note          With non-AEAD ciphers, the order of calls for each message
+ *                is as follows:
+ *                1. mbedtls_cipher_set_iv() if the mode uses an IV/nonce.
+ *                2. mbedtls_cipher_reset()
+ *                3. mbedtls_cipher_update() one or more times
+ *                4. mbedtls_cipher_finish()
+ *                .
+ *                This sequence can be repeated to encrypt or decrypt multiple
+ *                messages with the same key.
+ *
+ * \note          With AEAD ciphers, the order of calls for each message
+ *                is as follows:
+ *                1. mbedtls_cipher_set_iv() if the mode uses an IV/nonce.
+ *                2. mbedtls_cipher_reset()
+ *                3. mbedtls_cipher_update_ad()
+ *                4. mbedtls_cipher_update() one or more times
+ *                5. mbedtls_cipher_finish()
+ *                6. mbedtls_cipher_check_tag() (for decryption) or
+ *                mbedtls_cipher_write_tag() (for encryption).
+ *                .
+ *                This sequence can be repeated to encrypt or decrypt multiple
+ *                messages with the same key.
+ *
+ * \param ctx     The generic cipher context. This must be bound to a key.
  *
  * \return        \c 0 on success.
  * \return        #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
diff --git a/include/mbedtls/config.h b/include/mbedtls/config.h
index 1014091..9cce3cd 100644
--- a/include/mbedtls/config.h
+++ b/include/mbedtls/config.h
@@ -683,26 +683,6 @@
 //#define MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
 
 /**
- * \def MBEDTLS_REMOVE_3DES_CIPHERSUITES
- *
- * Remove 3DES ciphersuites by default in SSL / TLS.
- * This flag removes the ciphersuites based on 3DES from the default list as
- * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible
- * to enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including
- * them explicitly.
- *
- * A man-in-the-browser attacker can recover authentication tokens sent through
- * a TLS connection using a 3DES based cipher suite (see "On the Practical
- * (In-)Security of 64-bit Block Ciphers" by Karthikeyan Bhargavan and Gaëtan
- * Leurent, see https://sweet32.info/SWEET32_CCS16.pdf). If this attack falls
- * in your threat model or you are unsure, then you should keep this option
- * enabled to remove 3DES based cipher suites.
- *
- * Comment this macro to keep 3DES in the default ciphersuite list.
- */
-#define MBEDTLS_REMOVE_3DES_CIPHERSUITES
-
-/**
  * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED
  *
  * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve
@@ -779,40 +759,11 @@
  *
  * \note  This option only works with the default software implementation of
  *        elliptic curve functionality. It is incompatible with
- *        MBEDTLS_ECP_ALT, MBEDTLS_ECDH_XXX_ALT, MBEDTLS_ECDSA_XXX_ALT
- *        and MBEDTLS_ECDH_LEGACY_CONTEXT.
+ *        MBEDTLS_ECP_ALT, MBEDTLS_ECDH_XXX_ALT, MBEDTLS_ECDSA_XXX_ALT.
  */
 //#define MBEDTLS_ECP_RESTARTABLE
 
 /**
- * \def MBEDTLS_ECDH_LEGACY_CONTEXT
- *
- * Use a backward compatible ECDH context.
- *
- * Mbed TLS supports two formats for ECDH contexts (#mbedtls_ecdh_context
- * defined in `ecdh.h`). For most applications, the choice of format makes
- * no difference, since all library functions can work with either format,
- * except that the new format is incompatible with MBEDTLS_ECP_RESTARTABLE.
-
- * The new format used when this option is disabled is smaller
- * (56 bytes on a 32-bit platform). In future versions of the library, it
- * will support alternative implementations of ECDH operations.
- * The new format is incompatible with applications that access
- * context fields directly and with restartable ECP operations.
- *
- * Define this macro if you enable MBEDTLS_ECP_RESTARTABLE or if you
- * want to access ECDH context fields directly. Otherwise you should
- * comment out this macro definition.
- *
- * This option has no effect if #MBEDTLS_ECDH_C is not enabled.
- *
- * \note This configuration option is experimental. Future versions of the
- *       library may modify the way the ECDH context layout is configured
- *       and may modify the layout of the new context type.
- */
-#define MBEDTLS_ECDH_LEGACY_CONTEXT
-
-/**
  * \def MBEDTLS_ECDSA_DETERMINISTIC
  *
  * Enable deterministic ECDSA (RFC 6979).
@@ -843,7 +794,6 @@
  *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
  *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
  *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
  */
 #define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
 
@@ -866,7 +816,6 @@
  *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
  *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
  *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
  *
  * \warning    Using DHE constitutes a security risk as it
  *             is not possible to validate custom DH parameters.
@@ -892,7 +841,6 @@
  *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
  *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
  *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
  */
 #define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
 
@@ -916,7 +864,6 @@
  *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
  *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
  *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
  */
 #define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
 
@@ -942,7 +889,6 @@
  *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
  *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
  *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
- *      MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
  */
 #define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
 
@@ -968,7 +914,6 @@
  *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
  *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
  *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
- *      MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  *
  * \warning    Using DHE constitutes a security risk as it
  *             is not possible to validate custom DH parameters.
@@ -999,7 +944,6 @@
  *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
  *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  */
 #define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
 
@@ -1022,7 +966,6 @@
  *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
  *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  */
 #define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
 
@@ -1035,7 +978,6 @@
  *
  * This enables the following ciphersuites (if other requisites are
  * enabled as well):
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
  *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
@@ -1058,7 +1000,6 @@
  *
  * This enables the following ciphersuites (if other requisites are
  * enabled as well):
- *      MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
  *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
@@ -1939,16 +1880,6 @@
 #define MBEDTLS_VERSION_FEATURES
 
 /**
- * \def MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3
- *
- * If set, the X509 parser will not break-off when parsing an X509 certificate
- * and encountering an extension in a v1 or v2 certificate.
- *
- * Uncomment to prevent an error.
- */
-//#define MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3
-
-/**
  * \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
  *
  * If set, the X509 parser will not break-off when parsing an X509 certificate
@@ -2422,19 +2353,6 @@
  * Caller:  library/pem.c
  *          library/cipher.c
  *
- * This module enables the following ciphersuites (if other requisites are
- * enabled as well):
- *      MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
- *      MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
- *
  * PEM_PARSE uses DES/3DES for decrypting encrypted keys.
  *
  * \warning   DES is considered a weak cipher and its use constitutes a
@@ -3486,27 +3404,10 @@
  */
 //#define MBEDTLS_SSL_CID_OUT_LEN_MAX 32
 
-/** \def MBEDTLS_SSL_CID_PADDING_GRANULARITY
+/** \def MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY
  *
  * This option controls the use of record plaintext padding
- * when using the Connection ID extension in DTLS 1.2.
- *
- * The padding will always be chosen so that the length of the
- * padded plaintext is a multiple of the value of this option.
- *
- * Note: A value of \c 1 means that no padding will be used
- *       for outgoing records.
- *
- * Note: On systems lacking division instructions,
- *       a power of two should be preferred.
- *
- */
-//#define MBEDTLS_SSL_CID_PADDING_GRANULARITY 16
-
-/** \def MBEDTLS_SSL_TLS1_3_PADDING_GRANULARITY
- *
- * This option controls the use of record plaintext padding
- * in TLS 1.3.
+ * in TLS 1.3 and when using the Connection ID extension in DTLS 1.2.
  *
  * The padding will always be chosen so that the length of the
  * padded plaintext is a multiple of the value of this option.
@@ -3517,7 +3418,7 @@
  * Note: On systems lacking division instructions,
  *       a power of two should be preferred.
  */
-//#define MBEDTLS_SSL_TLS1_3_PADDING_GRANULARITY 1
+//#define MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 16
 
 /** \def MBEDTLS_SSL_OUT_CONTENT_LEN
  *
diff --git a/include/mbedtls/config_psa.h b/include/mbedtls/config_psa.h
index 2032a36..f5db94e 100644
--- a/include/mbedtls/config_psa.h
+++ b/include/mbedtls/config_psa.h
@@ -38,6 +38,30 @@
 extern "C" {
 #endif
 
+
+
+/****************************************************************/
+/* De facto synonyms */
+/****************************************************************/
+
+#if defined(PSA_WANT_ALG_ECDSA_ANY) && !defined(PSA_WANT_ALG_ECDSA)
+#define PSA_WANT_ALG_ECDSA PSA_WANT_ALG_ECDSA_ANY
+#elif !defined(PSA_WANT_ALG_ECDSA_ANY) && defined(PSA_WANT_ALG_ECDSA)
+#define PSA_WANT_ALG_ECDSA_ANY PSA_WANT_ALG_ECDSA
+#endif
+
+#if defined(PSA_WANT_ALG_RSA_PKCS1V15_SIGN_RAW) && !defined(PSA_WANT_ALG_RSA_PKCS1V15_SIGN)
+#define PSA_WANT_ALG_RSA_PKCS1V15_SIGN PSA_WANT_ALG_RSA_PKCS1V15_SIGN_RAW
+#elif !defined(PSA_WANT_ALG_RSA_PKCS1V15_SIGN_RAW) && defined(PSA_WANT_ALG_RSA_PKCS1V15_SIGN)
+#define PSA_WANT_ALG_RSA_PKCS1V15_SIGN_RAW PSA_WANT_ALG_RSA_PKCS1V15_SIGN
+#endif
+
+
+
+/****************************************************************/
+/* Require built-in implementations based on PSA requirements */
+/****************************************************************/
+
 #if defined(MBEDTLS_PSA_CRYPTO_CONFIG)
 
 #if defined(PSA_WANT_ALG_DETERMINISTIC_ECDSA)
@@ -497,6 +521,12 @@
 #endif /* !MBEDTLS_PSA_ACCEL_ECC_SECP_K1_256 */
 #endif /* PSA_WANT_ECC_SECP_K1_256 */
 
+
+
+/****************************************************************/
+/* Infer PSA requirements from Mbed TLS capabilities */
+/****************************************************************/
+
 #else /* MBEDTLS_PSA_CRYPTO_CONFIG */
 
 /*
@@ -522,6 +552,7 @@
 #if defined(MBEDTLS_ECDSA_C)
 #define MBEDTLS_PSA_BUILTIN_ALG_ECDSA 1
 #define PSA_WANT_ALG_ECDSA 1
+#define PSA_WANT_ALG_ECDSA_ANY 1
 
 // Only add in DETERMINISTIC support if ECDSA is also enabled
 #if defined(MBEDTLS_ECDSA_DETERMINISTIC)
@@ -586,6 +617,7 @@
 #define PSA_WANT_ALG_RSA_PKCS1V15_CRYPT 1
 #define MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN 1
 #define PSA_WANT_ALG_RSA_PKCS1V15_SIGN 1
+#define PSA_WANT_ALG_RSA_PKCS1V15_SIGN_RAW 1
 #endif /* MBEDTLSS_PKCS1_V15 */
 #if defined(MBEDTLS_PKCS1_V21)
 #define MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP 1
diff --git a/include/mbedtls/ecdh.h b/include/mbedtls/ecdh.h
index af4b273..807c884 100644
--- a/include/mbedtls/ecdh.h
+++ b/include/mbedtls/ecdh.h
@@ -41,6 +41,25 @@
 
 #include "mbedtls/ecp.h"
 
+/*
+ * Mbed TLS supports two formats for ECDH contexts (#mbedtls_ecdh_context
+ * defined in `ecdh.h`). For most applications, the choice of format makes
+ * no difference, since all library functions can work with either format,
+ * except that the new format is incompatible with MBEDTLS_ECP_RESTARTABLE.
+
+ * The new format used when this option is disabled is smaller
+ * (56 bytes on a 32-bit platform). In future versions of the library, it
+ * will support alternative implementations of ECDH operations.
+ * The new format is incompatible with applications that access
+ * context fields directly and with restartable ECP operations.
+ */
+
+#if defined(MBEDTLS_ECP_RESTARTABLE)
+#define MBEDTLS_ECDH_LEGACY_CONTEXT
+#else
+#undef MBEDTLS_ECDH_LEGACY_CONTEXT
+#endif
+
 #if defined(MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED)
 #undef MBEDTLS_ECDH_LEGACY_CONTEXT
 #include "everest/everest.h"
diff --git a/include/mbedtls/ecp.h b/include/mbedtls/ecp.h
index a3b4424..05c33ff 100644
--- a/include/mbedtls/ecp.h
+++ b/include/mbedtls/ecp.h
@@ -230,7 +230,7 @@
     int (*MBEDTLS_PRIVATE(t_post))(mbedtls_ecp_point *, void *); /*!< Unused. */
     void *MBEDTLS_PRIVATE(t_data);               /*!< Unused. */
     mbedtls_ecp_point *MBEDTLS_PRIVATE(T);       /*!< Pre-computed points for ecp_mul_comb(). */
-    size_t MBEDTLS_PRIVATE(T_size);              /*!< The number of pre-computed points. */
+    size_t MBEDTLS_PRIVATE(T_size);              /*!< The number of dynamic allocated pre-computed points. */
 }
 mbedtls_ecp_group;
 
@@ -277,15 +277,16 @@
 
 #if !defined(MBEDTLS_ECP_FIXED_POINT_OPTIM)
 /*
- * Trade memory for speed on fixed-point multiplication.
+ * Trade code size for speed on fixed-point multiplication.
  *
  * This speeds up repeated multiplication of the generator (that is, the
  * multiplication in ECDSA signatures, and half of the multiplications in
  * ECDSA verification and ECDHE) by a factor roughly 3 to 4.
  *
- * The cost is increasing EC peak memory usage by a factor roughly 2.
+ * For each n-bit Short Weierstrass curve that is enabled, this adds 4n bytes
+ * of code size if n < 384 and 8n otherwise.
  *
- * Change this value to 0 to reduce peak memory usage.
+ * Change this value to 0 to reduce code size.
  */
 #define MBEDTLS_ECP_FIXED_POINT_OPTIM  1   /**< Enable fixed-point speed-up. */
 #endif /* MBEDTLS_ECP_FIXED_POINT_OPTIM */
diff --git a/include/mbedtls/oid.h b/include/mbedtls/oid.h
index dd3ade6..c866ebe 100644
--- a/include/mbedtls/oid.h
+++ b/include/mbedtls/oid.h
@@ -146,6 +146,7 @@
 #define MBEDTLS_OID_AT_DN_QUALIFIER             MBEDTLS_OID_AT "\x2E" /**< id-at-dnQualifier AttributeType:= {id-at 46} */
 #define MBEDTLS_OID_AT_PSEUDONYM                MBEDTLS_OID_AT "\x41" /**< id-at-pseudonym AttributeType:= {id-at 65} */
 
+#define MBEDTLS_OID_UID                         "\x09\x92\x26\x89\x93\xF2\x2C\x64\x01\x01" /** id-domainComponent AttributeType:= {itu-t(0) data(9) pss(2342) ucl(19200300) pilot(100) pilotAttributeType(1) uid(1)} */
 #define MBEDTLS_OID_DOMAIN_COMPONENT            "\x09\x92\x26\x89\x93\xF2\x2C\x64\x01\x19" /** id-domainComponent AttributeType:= {itu-t(0) data(9) pss(2342) ucl(19200300) pilot(100) pilotAttributeType(1) domainComponent(25)} */
 
 /*
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index 1830b84..2dda6ad 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -258,12 +258,8 @@
 #define MBEDTLS_SSL_CID_OUT_LEN_MAX         32
 #endif
 
-#if !defined(MBEDTLS_SSL_CID_PADDING_GRANULARITY)
-#define MBEDTLS_SSL_CID_PADDING_GRANULARITY 16
-#endif
-
-#if !defined(MBEDTLS_SSL_TLS1_3_PADDING_GRANULARITY)
-#define MBEDTLS_SSL_TLS1_3_PADDING_GRANULARITY 1
+#if !defined(MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY)
+#define MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 16
 #endif
 
 /* \} name SECTION: Module settings */
@@ -2713,8 +2709,14 @@
 
 #if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
 /**
- * \brief          Configure a pre-shared key (PSK) and identity
- *                 to be used in PSK-based ciphersuites.
+ * \brief          Configure pre-shared keys (PSKs) and their
+ *                 identities to be used in PSK-based ciphersuites.
+ *
+ *                 Only one PSK can be registered, through either
+ *                 mbedtls_ssl_conf_psk() or mbedtls_ssl_conf_psk_opaque().
+ *                 If you attempt to register more than one PSK, this function
+ *                 fails, though this may change in future versions, which
+ *                 may add support for multiple PSKs.
  *
  * \note           This is mainly useful for clients. Servers will usually
  *                 want to use \c mbedtls_ssl_conf_psk_cb() instead.
@@ -2722,13 +2724,6 @@
  * \note           A PSK set by \c mbedtls_ssl_set_hs_psk() in the PSK callback
  *                 takes precedence over a PSK configured by this function.
  *
- * \warning        Currently, clients can only register a single pre-shared key.
- *                 Calling this function or mbedtls_ssl_conf_psk_opaque() more
- *                 than once will overwrite values configured in previous calls.
- *                 Support for setting multiple PSKs on clients and selecting
- *                 one based on the identity hint is not a planned feature,
- *                 but feedback is welcomed.
- *
  * \param conf     The SSL configuration to register the PSK with.
  * \param psk      The pointer to the pre-shared key to use.
  * \param psk_len  The length of the pre-shared key in bytes.
@@ -2741,7 +2736,9 @@
  *                 of the SSL configuration.
  *
  * \return         \c 0 if successful.
- * \return         An \c MBEDTLS_ERR_SSL_XXX error code on failure.
+ * \return         #MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE if no more PSKs
+ *                 can be configured. In this case, the old PSK(s) remain intact.
+ * \return         Another negative error code on other kinds of failure.
  */
 int mbedtls_ssl_conf_psk( mbedtls_ssl_config *conf,
                 const unsigned char *psk, size_t psk_len,
@@ -2749,8 +2746,14 @@
 
 #if defined(MBEDTLS_USE_PSA_CRYPTO)
 /**
- * \brief          Configure an opaque pre-shared key (PSK) and identity
- *                 to be used in PSK-based ciphersuites.
+ * \brief          Configure one or more opaque pre-shared keys (PSKs) and
+ *                 their identities to be used in PSK-based ciphersuites.
+ *
+ *                 Only one PSK can be registered, through either
+ *                 mbedtls_ssl_conf_psk() or mbedtls_ssl_conf_psk_opaque().
+ *                 If you attempt to register more than one PSK, this function
+ *                 fails, though this may change in future versions, which
+ *                 may add support for multiple PSKs.
  *
  * \note           This is mainly useful for clients. Servers will usually
  *                 want to use \c mbedtls_ssl_conf_psk_cb() instead.
@@ -2759,13 +2762,6 @@
  *                 the PSK callback takes precedence over an opaque PSK
  *                 configured by this function.
  *
- * \warning        Currently, clients can only register a single pre-shared key.
- *                 Calling this function or mbedtls_ssl_conf_psk() more than
- *                 once will overwrite values configured in previous calls.
- *                 Support for setting multiple PSKs on clients and selecting
- *                 one based on the identity hint is not a planned feature,
- *                 but feedback is welcomed.
- *
  * \param conf     The SSL configuration to register the PSK with.
  * \param psk      The identifier of the key slot holding the PSK.
  *                 Until \p conf is destroyed or this function is successfully
@@ -2782,7 +2778,9 @@
  *                 SSL configuration.
  *
  * \return         \c 0 if successful.
- * \return         An \c MBEDTLS_ERR_SSL_XXX error code on failure.
+ * \return         #MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE if no more PSKs
+ *                 can be configured. In this case, the old PSK(s) remain intact.
+ * \return         Another negative error code on other kinds of failure.
  */
 int mbedtls_ssl_conf_psk_opaque( mbedtls_ssl_config *conf,
                                  psa_key_id_t psk,
diff --git a/include/mbedtls/ssl_ciphersuites.h b/include/mbedtls/ssl_ciphersuites.h
index 00a1aae..e343c9c 100644
--- a/include/mbedtls/ssl_ciphersuites.h
+++ b/include/mbedtls/ssl_ciphersuites.h
@@ -43,10 +43,6 @@
 #define MBEDTLS_TLS_RSA_WITH_NULL_MD5                    0x01   /**< Weak! */
 #define MBEDTLS_TLS_RSA_WITH_NULL_SHA                    0x02   /**< Weak! */
 
-#define MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA            0x0A
-
-#define MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA        0x16
-
 #define MBEDTLS_TLS_PSK_WITH_NULL_SHA                    0x2C   /**< Weak! */
 #define MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA                0x2D   /**< Weak! */
 #define MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA                0x2E   /**< Weak! */
@@ -69,15 +65,12 @@
 #define MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA        0x84
 #define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA    0x88
 
-#define MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA            0x8B
 #define MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA             0x8C
 #define MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA             0x8D
 
-#define MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA        0x8F
 #define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA         0x90
 #define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA         0x91
 
-#define MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA        0x93
 #define MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA         0x94
 #define MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA         0x95
 
@@ -115,22 +108,18 @@
 #define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 0xC4   /**< TLS 1.2 */
 
 #define MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA             0xC001 /**< Weak! */
-#define MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA     0xC003
 #define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA      0xC004
 #define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA      0xC005
 
 #define MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA            0xC006 /**< Weak! */
-#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA    0xC008
 #define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA     0xC009
 #define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA     0xC00A
 
 #define MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA               0xC00B /**< Weak! */
-#define MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA       0xC00D
 #define MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA        0xC00E
 #define MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA        0xC00F
 
 #define MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA              0xC010 /**< Weak! */
-#define MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA      0xC012
 #define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA       0xC013
 #define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA       0xC014
 
@@ -152,7 +141,6 @@
 #define MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256     0xC031 /**< TLS 1.2 */
 #define MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384     0xC032 /**< TLS 1.2 */
 
-#define MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA      0xC034
 #define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA       0xC035
 #define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA       0xC036
 #define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256    0xC037
diff --git a/include/mbedtls/x509_csr.h b/include/mbedtls/x509_csr.h
index fa98394..0a069df 100644
--- a/include/mbedtls/x509_csr.h
+++ b/include/mbedtls/x509_csr.h
@@ -236,6 +236,7 @@
  * \param ctx       CSR context to use
  * \param oid       OID of the extension
  * \param oid_len   length of the OID
+ * \param critical  Set to 1 to mark the extension as critical, 0 otherwise.
  * \param val       value of the extension OCTET STRING
  * \param val_len   length of the value data
  *
@@ -243,6 +244,7 @@
  */
 int mbedtls_x509write_csr_set_extension( mbedtls_x509write_csr *ctx,
                                  const char *oid, size_t oid_len,
+                                 int critical,
                                  const unsigned char *val, size_t val_len );
 
 /**