diff --git a/include/mbedtls/ccm.h b/include/mbedtls/ccm.h
index 48f73ed..8585ce5 100644
--- a/include/mbedtls/ccm.h
+++ b/include/mbedtls/ccm.h
@@ -1,8 +1,11 @@
 /**
  * \file ccm.h
  *
- * \brief CCM combines Counter mode encryption with CBC-MAC authentication
- *        for 128-bit block ciphers.
+ * \brief This file provides an API for the CCM authenticated encryption
+ *        mode for block ciphers.
+ *
+ * CCM combines Counter mode encryption with CBC-MAC authentication
+ * for 128-bit block ciphers.
  *
  * Input to CCM includes the following elements:
  * <ul><li>Payload - data that is both authenticated and encrypted.</li>
@@ -80,7 +83,8 @@
  * \param key       The encryption key.
  * \param keybits   The key size in bits. This must be acceptable by the cipher.
  *
- * \return          \c 0 on success, or a cipher-specific error code.
+ * \return          \c 0 on success.
+ * \return          A CCM or cipher-specific error code on failure.
  */
 int mbedtls_ccm_setkey( mbedtls_ccm_context *ctx,
                         mbedtls_cipher_id_t cipher,
@@ -98,6 +102,13 @@
 /**
  * \brief           This function encrypts a buffer using CCM.
  *
+ *
+ * \note            The tag is written to a separate buffer. To concatenate
+ *                  the \p tag with the \p output, as done in <em>RFC-3610:
+ *                  Counter with CBC-MAC (CCM)</em>, use
+ *                  \p tag = \p output + \p length, and make sure that the
+ *                  output buffer is at least \p length + \p tag_len wide.
+ *
  * \param ctx       The CCM context to use for encryption.
  * \param length    The length of the input data in Bytes.
  * \param iv        Initialization vector (nonce).
@@ -112,13 +123,8 @@
  * \param tag_len   The length of the tag to generate in Bytes:
  *                  4, 6, 8, 10, 12, 14 or 16.
  *
- * \note            The tag is written to a separate buffer. To concatenate
- *                  the \p tag with the \p output, as done in <em>RFC-3610:
- *                  Counter with CBC-MAC (CCM)</em>, use
- *                  \p tag = \p output + \p length, and make sure that the
- *                  output buffer is at least \p length + \p tag_len wide.
- *
  * \return          \c 0 on success.
+ * \return          A CCM or cipher-specific error code on failure.
  */
 int mbedtls_ccm_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length,
                          const unsigned char *iv, size_t iv_len,
@@ -144,8 +150,9 @@
  * \param tag_len   The length of the tag in Bytes.
  *                  4, 6, 8, 10, 12, 14 or 16.
  *
- * \return          0 if successful and authenticated, or
- *                  #MBEDTLS_ERR_CCM_AUTH_FAILED if the tag does not match.
+ * \return          \c 0 on success. This indicates that the message is authentic.
+ * \return          #MBEDTLS_ERR_CCM_AUTH_FAILED if the tag does not match.
+ * \return          A cipher-specific error code on calculation failure.
  */
 int mbedtls_ccm_auth_decrypt( mbedtls_ccm_context *ctx, size_t length,
                       const unsigned char *iv, size_t iv_len,
@@ -158,7 +165,8 @@
 /**
  * \brief          The CCM checkup routine.
  *
- * \return         \c 0 on success, or \c 1 on failure.
+ * \return         \c 0 on success.
+ * \return         \c 1 on failure.
  */
 int mbedtls_ccm_self_test( int verbose );
 #endif /* MBEDTLS_SELF_TEST && MBEDTLS_AES_C */
diff --git a/include/mbedtls/cipher.h b/include/mbedtls/cipher.h
index d1f4efe..3ee2ab7 100644
--- a/include/mbedtls/cipher.h
+++ b/include/mbedtls/cipher.h
@@ -1,7 +1,9 @@
 /**
  * \file cipher.h
  *
- * \brief The generic cipher wrapper.
+ * \brief This file contains an abstraction interface for use with the cipher
+ * primitives provided by the library. It provides a common interface to all of
+ * the available cipher operations.
  *
  * \author Adriaan de Jong <dejong@fox-it.com>
  */
@@ -69,93 +71,93 @@
 #endif
 
 /**
- * \brief     An enumeration of supported ciphers.
+ * \brief     Supported cipher types.
  *
- * \warning   ARC4 and DES are considered weak ciphers and their use
- *            constitutes a security risk. We recommend considering stronger
+ * \warning   RC4 and DES are considered weak ciphers and their use
+ *            constitutes a security risk. Arm recommends considering stronger
  *            ciphers instead.
  */
 typedef enum {
-    MBEDTLS_CIPHER_ID_NONE = 0,
-    MBEDTLS_CIPHER_ID_NULL,
-    MBEDTLS_CIPHER_ID_AES,
-    MBEDTLS_CIPHER_ID_DES,
-    MBEDTLS_CIPHER_ID_3DES,
-    MBEDTLS_CIPHER_ID_CAMELLIA,
-    MBEDTLS_CIPHER_ID_BLOWFISH,
-    MBEDTLS_CIPHER_ID_ARC4,
+    MBEDTLS_CIPHER_ID_NONE = 0,  /**< Placeholder to mark the end of cipher ID lists. */
+    MBEDTLS_CIPHER_ID_NULL,      /**< The identity cipher, treated as a stream cipher. */
+    MBEDTLS_CIPHER_ID_AES,       /**< The AES cipher. */
+    MBEDTLS_CIPHER_ID_DES,       /**< The DES cipher. */
+    MBEDTLS_CIPHER_ID_3DES,      /**< The Triple DES cipher. */
+    MBEDTLS_CIPHER_ID_CAMELLIA,  /**< The Camellia cipher. */
+    MBEDTLS_CIPHER_ID_BLOWFISH,  /**< The Blowfish cipher. */
+    MBEDTLS_CIPHER_ID_ARC4,      /**< The RC4 cipher. */
 } mbedtls_cipher_id_t;
 
 /**
- * \brief     An enumeration of supported (cipher, mode) pairs.
+ * \brief     Supported {cipher type, cipher mode} pairs.
  *
- * \warning   ARC4 and DES are considered weak ciphers and their use
- *            constitutes a security risk. We recommend considering stronger
+ * \warning   RC4 and DES are considered weak ciphers and their use
+ *            constitutes a security risk. Arm recommends considering stronger
  *            ciphers instead.
  */
 typedef enum {
-    MBEDTLS_CIPHER_NONE = 0,
-    MBEDTLS_CIPHER_NULL,
-    MBEDTLS_CIPHER_AES_128_ECB,
-    MBEDTLS_CIPHER_AES_192_ECB,
-    MBEDTLS_CIPHER_AES_256_ECB,
-    MBEDTLS_CIPHER_AES_128_CBC,
-    MBEDTLS_CIPHER_AES_192_CBC,
-    MBEDTLS_CIPHER_AES_256_CBC,
-    MBEDTLS_CIPHER_AES_128_CFB128,
-    MBEDTLS_CIPHER_AES_192_CFB128,
-    MBEDTLS_CIPHER_AES_256_CFB128,
-    MBEDTLS_CIPHER_AES_128_CTR,
-    MBEDTLS_CIPHER_AES_192_CTR,
-    MBEDTLS_CIPHER_AES_256_CTR,
-    MBEDTLS_CIPHER_AES_128_GCM,
-    MBEDTLS_CIPHER_AES_192_GCM,
-    MBEDTLS_CIPHER_AES_256_GCM,
-    MBEDTLS_CIPHER_CAMELLIA_128_ECB,
-    MBEDTLS_CIPHER_CAMELLIA_192_ECB,
-    MBEDTLS_CIPHER_CAMELLIA_256_ECB,
-    MBEDTLS_CIPHER_CAMELLIA_128_CBC,
-    MBEDTLS_CIPHER_CAMELLIA_192_CBC,
-    MBEDTLS_CIPHER_CAMELLIA_256_CBC,
-    MBEDTLS_CIPHER_CAMELLIA_128_CFB128,
-    MBEDTLS_CIPHER_CAMELLIA_192_CFB128,
-    MBEDTLS_CIPHER_CAMELLIA_256_CFB128,
-    MBEDTLS_CIPHER_CAMELLIA_128_CTR,
-    MBEDTLS_CIPHER_CAMELLIA_192_CTR,
-    MBEDTLS_CIPHER_CAMELLIA_256_CTR,
-    MBEDTLS_CIPHER_CAMELLIA_128_GCM,
-    MBEDTLS_CIPHER_CAMELLIA_192_GCM,
-    MBEDTLS_CIPHER_CAMELLIA_256_GCM,
-    MBEDTLS_CIPHER_DES_ECB,
-    MBEDTLS_CIPHER_DES_CBC,
-    MBEDTLS_CIPHER_DES_EDE_ECB,
-    MBEDTLS_CIPHER_DES_EDE_CBC,
-    MBEDTLS_CIPHER_DES_EDE3_ECB,
-    MBEDTLS_CIPHER_DES_EDE3_CBC,
-    MBEDTLS_CIPHER_BLOWFISH_ECB,
-    MBEDTLS_CIPHER_BLOWFISH_CBC,
-    MBEDTLS_CIPHER_BLOWFISH_CFB64,
-    MBEDTLS_CIPHER_BLOWFISH_CTR,
-    MBEDTLS_CIPHER_ARC4_128,
-    MBEDTLS_CIPHER_AES_128_CCM,
-    MBEDTLS_CIPHER_AES_192_CCM,
-    MBEDTLS_CIPHER_AES_256_CCM,
-    MBEDTLS_CIPHER_CAMELLIA_128_CCM,
-    MBEDTLS_CIPHER_CAMELLIA_192_CCM,
-    MBEDTLS_CIPHER_CAMELLIA_256_CCM,
+    MBEDTLS_CIPHER_NONE = 0,             /**< Placeholder to mark the end of cipher-pair lists. */
+    MBEDTLS_CIPHER_NULL,                 /**< The identity stream cipher. */
+    MBEDTLS_CIPHER_AES_128_ECB,          /**< AES cipher with 128-bit ECB mode. */
+    MBEDTLS_CIPHER_AES_192_ECB,          /**< AES cipher with 192-bit ECB mode. */
+    MBEDTLS_CIPHER_AES_256_ECB,          /**< AES cipher with 256-bit ECB mode. */
+    MBEDTLS_CIPHER_AES_128_CBC,          /**< AES cipher with 128-bit CBC mode. */
+    MBEDTLS_CIPHER_AES_192_CBC,          /**< AES cipher with 192-bit CBC mode. */
+    MBEDTLS_CIPHER_AES_256_CBC,          /**< AES cipher with 256-bit CBC mode. */
+    MBEDTLS_CIPHER_AES_128_CFB128,       /**< AES cipher with 128-bit CFB128 mode. */
+    MBEDTLS_CIPHER_AES_192_CFB128,       /**< AES cipher with 192-bit CFB128 mode. */
+    MBEDTLS_CIPHER_AES_256_CFB128,       /**< AES cipher with 256-bit CFB128 mode. */
+    MBEDTLS_CIPHER_AES_128_CTR,          /**< AES cipher with 128-bit CTR mode. */
+    MBEDTLS_CIPHER_AES_192_CTR,          /**< AES cipher with 192-bit CTR mode. */
+    MBEDTLS_CIPHER_AES_256_CTR,          /**< AES cipher with 256-bit CTR mode. */
+    MBEDTLS_CIPHER_AES_128_GCM,          /**< AES cipher with 128-bit GCM mode. */
+    MBEDTLS_CIPHER_AES_192_GCM,          /**< AES cipher with 192-bit GCM mode. */
+    MBEDTLS_CIPHER_AES_256_GCM,          /**< AES cipher with 256-bit GCM mode. */
+    MBEDTLS_CIPHER_CAMELLIA_128_ECB,     /**< Camellia cipher with 128-bit ECB mode. */
+    MBEDTLS_CIPHER_CAMELLIA_192_ECB,     /**< Camellia cipher with 192-bit ECB mode. */
+    MBEDTLS_CIPHER_CAMELLIA_256_ECB,     /**< Camellia cipher with 256-bit ECB mode. */
+    MBEDTLS_CIPHER_CAMELLIA_128_CBC,     /**< Camellia cipher with 128-bit CBC mode. */
+    MBEDTLS_CIPHER_CAMELLIA_192_CBC,     /**< Camellia cipher with 192-bit CBC mode. */
+    MBEDTLS_CIPHER_CAMELLIA_256_CBC,     /**< Camellia cipher with 256-bit CBC mode. */
+    MBEDTLS_CIPHER_CAMELLIA_128_CFB128,  /**< Camellia cipher with 128-bit CFB128 mode. */
+    MBEDTLS_CIPHER_CAMELLIA_192_CFB128,  /**< Camellia cipher with 192-bit CFB128 mode. */
+    MBEDTLS_CIPHER_CAMELLIA_256_CFB128,  /**< Camellia cipher with 256-bit CFB128 mode. */
+    MBEDTLS_CIPHER_CAMELLIA_128_CTR,     /**< Camellia cipher with 128-bit CTR mode. */
+    MBEDTLS_CIPHER_CAMELLIA_192_CTR,     /**< Camellia cipher with 192-bit CTR mode. */
+    MBEDTLS_CIPHER_CAMELLIA_256_CTR,     /**< Camellia cipher with 256-bit CTR mode. */
+    MBEDTLS_CIPHER_CAMELLIA_128_GCM,     /**< Camellia cipher with 128-bit GCM mode. */
+    MBEDTLS_CIPHER_CAMELLIA_192_GCM,     /**< Camellia cipher with 192-bit GCM mode. */
+    MBEDTLS_CIPHER_CAMELLIA_256_GCM,     /**< Camellia cipher with 256-bit GCM mode. */
+    MBEDTLS_CIPHER_DES_ECB,              /**< DES cipher with ECB mode. */
+    MBEDTLS_CIPHER_DES_CBC,              /**< DES cipher with CBC mode. */
+    MBEDTLS_CIPHER_DES_EDE_ECB,          /**< DES cipher with EDE ECB mode. */
+    MBEDTLS_CIPHER_DES_EDE_CBC,          /**< DES cipher with EDE CBC mode. */
+    MBEDTLS_CIPHER_DES_EDE3_ECB,         /**< DES cipher with EDE3 ECB mode. */
+    MBEDTLS_CIPHER_DES_EDE3_CBC,         /**< DES cipher with EDE3 CBC mode. */
+    MBEDTLS_CIPHER_BLOWFISH_ECB,         /**< Blowfish cipher with ECB mode. */
+    MBEDTLS_CIPHER_BLOWFISH_CBC,         /**< Blowfish cipher with CBC mode. */
+    MBEDTLS_CIPHER_BLOWFISH_CFB64,       /**< Blowfish cipher with CFB64 mode. */
+    MBEDTLS_CIPHER_BLOWFISH_CTR,         /**< Blowfish cipher with CTR mode. */
+    MBEDTLS_CIPHER_ARC4_128,             /**< RC4 cipher with 128-bit mode. */
+    MBEDTLS_CIPHER_AES_128_CCM,          /**< AES cipher with 128-bit CCM mode. */
+    MBEDTLS_CIPHER_AES_192_CCM,          /**< AES cipher with 192-bit CCM mode. */
+    MBEDTLS_CIPHER_AES_256_CCM,          /**< AES cipher with 256-bit CCM mode. */
+    MBEDTLS_CIPHER_CAMELLIA_128_CCM,     /**< Camellia cipher with 128-bit CCM mode. */
+    MBEDTLS_CIPHER_CAMELLIA_192_CCM,     /**< Camellia cipher with 192-bit CCM mode. */
+    MBEDTLS_CIPHER_CAMELLIA_256_CCM,     /**< Camellia cipher with 256-bit CCM mode. */
 } mbedtls_cipher_type_t;
 
 /** Supported cipher modes. */
 typedef enum {
-    MBEDTLS_MODE_NONE = 0,
-    MBEDTLS_MODE_ECB,
-    MBEDTLS_MODE_CBC,
-    MBEDTLS_MODE_CFB,
-    MBEDTLS_MODE_OFB, /* Unused! */
-    MBEDTLS_MODE_CTR,
-    MBEDTLS_MODE_GCM,
-    MBEDTLS_MODE_STREAM,
-    MBEDTLS_MODE_CCM,
+    MBEDTLS_MODE_NONE = 0,               /**< None. */
+    MBEDTLS_MODE_ECB,                    /**< The ECB cipher mode. */
+    MBEDTLS_MODE_CBC,                    /**< The CBC cipher mode. */
+    MBEDTLS_MODE_CFB,                    /**< The CFB cipher mode. */
+    MBEDTLS_MODE_OFB,                    /**< The OFB cipher mode - unsupported. */
+    MBEDTLS_MODE_CTR,                    /**< The CTR cipher mode. */
+    MBEDTLS_MODE_GCM,                    /**< The GCM cipher mode. */
+    MBEDTLS_MODE_STREAM,                 /**< The stream cipher mode. */
+    MBEDTLS_MODE_CCM,                    /**< The CCM cipher mode. */
 } mbedtls_cipher_mode_t;
 
 /** Supported cipher padding types. */
@@ -163,8 +165,8 @@
     MBEDTLS_PADDING_PKCS7 = 0,     /**< PKCS7 padding (default).        */
     MBEDTLS_PADDING_ONE_AND_ZEROS, /**< ISO/IEC 7816-4 padding.         */
     MBEDTLS_PADDING_ZEROS_AND_LEN, /**< ANSI X.923 padding.             */
-    MBEDTLS_PADDING_ZEROS,         /**< zero padding (not reversible). */
-    MBEDTLS_PADDING_NONE,          /**< never pad (full blocks only).   */
+    MBEDTLS_PADDING_ZEROS,         /**< Zero padding (not reversible). */
+    MBEDTLS_PADDING_NONE,          /**< Never pad (full blocks only).   */
 } mbedtls_cipher_padding_t;
 
 /** Type of operation. */
@@ -228,7 +230,10 @@
      */
     unsigned int iv_size;
 
-    /** Flags to set. For example, if the cipher supports variable IV sizes or variable key sizes. */
+    /** Bitflag comprised of MBEDTLS_CIPHER_VARIABLE_IV_LEN and
+     *  MBEDTLS_CIPHER_VARIABLE_KEY_LEN indicating whether the
+     *  cipher supports variable IV or variable key sizes, respectively.
+     */
     int flags;
 
     /** The block size, in Bytes. */
@@ -299,7 +304,8 @@
  * \param cipher_name   Name of the cipher to search for.
  *
  * \return              The cipher information structure associated with the
- *                      given \p cipher_name, or NULL if not found.
+ *                      given \p cipher_name.
+ * \return              NULL if the associated cipher information is not found.
  */
 const mbedtls_cipher_info_t *mbedtls_cipher_info_from_string( const char *cipher_name );
 
@@ -310,7 +316,8 @@
  * \param cipher_type   Type of the cipher to search for.
  *
  * \return              The cipher information structure associated with the
- *                      given \p cipher_type, or NULL if not found.
+ *                      given \p cipher_type.
+ * \return              NULL if the associated cipher information is not found.
  */
 const mbedtls_cipher_info_t *mbedtls_cipher_info_from_type( const mbedtls_cipher_type_t cipher_type );
 
@@ -325,7 +332,8 @@
  * \param mode          The cipher mode. For example, #MBEDTLS_MODE_CBC.
  *
  * \return              The cipher information structure associated with the
- *                      given \p cipher_id, or NULL if not found.
+ *                      given \p cipher_id.
+ * \return              NULL if the associated cipher information is not found.
  */
 const mbedtls_cipher_info_t *mbedtls_cipher_info_from_values( const mbedtls_cipher_id_t cipher_id,
                                               int key_bitlen,
@@ -352,10 +360,11 @@
  * \param ctx           The context to initialize. May not be NULL.
  * \param cipher_info   The cipher to use.
  *
- * \return              \c 0 on success,
- *                      #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on parameter failure,
- *                      #MBEDTLS_ERR_CIPHER_ALLOC_FAILED if allocation of the
- *                      cipher-specific context failed.
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
+ *                      parameter-verification failure.
+ * \return              #MBEDTLS_ERR_CIPHER_ALLOC_FAILED if allocation of the
+ *                      cipher-specific context fails.
  *
  * \internal Currently, the function also clears the structure.
  * In future versions, the caller will be required to call
@@ -368,8 +377,8 @@
  *
  * \param ctx    The context of the cipher. Must be initialized.
  *
- * \return       The size of the blocks of the cipher, or zero if \p ctx
- *               has not been initialized.
+ * \return       The size of the blocks of the cipher.
+ * \return       0 if \p ctx has not been initialized.
  */
 static inline unsigned int mbedtls_cipher_get_block_size( const mbedtls_cipher_context_t *ctx )
 {
@@ -385,8 +394,8 @@
  *
  * \param ctx    The context of the cipher. Must be initialized.
  *
- * \return       The mode of operation, or #MBEDTLS_MODE_NONE if
- *               \p ctx has not been initialized.
+ * \return       The mode of operation.
+ * \return       #MBEDTLS_MODE_NONE if \p ctx has not been initialized.
  */
 static inline mbedtls_cipher_mode_t mbedtls_cipher_get_cipher_mode( const mbedtls_cipher_context_t *ctx )
 {
@@ -402,9 +411,9 @@
  *
  * \param ctx   The context of the cipher. Must be initialized.
  *
- * \return      <ul><li>If no IV has been set: the recommended IV size.
- *              0 for ciphers not using IV or nonce.</li>
- *              <li>If IV has already been set: the actual size.</li></ul>
+ * \return      The recommended IV size if no IV has been set.
+ * \return      \c 0 for ciphers not using an IV or a nonce.
+ * \return      The actual size if an IV has been set.
  */
 static inline int mbedtls_cipher_get_iv_size( const mbedtls_cipher_context_t *ctx )
 {
@@ -422,8 +431,8 @@
  *
  * \param ctx           The context of the cipher. Must be initialized.
  *
- * \return              The type of the cipher, or #MBEDTLS_CIPHER_NONE if
- *                      \p ctx has not been initialized.
+ * \return              The type of the cipher.
+ * \return              #MBEDTLS_CIPHER_NONE if \p ctx has not been initialized.
  */
 static inline mbedtls_cipher_type_t mbedtls_cipher_get_type( const mbedtls_cipher_context_t *ctx )
 {
@@ -439,8 +448,8 @@
  *
  * \param ctx           The context of the cipher. Must be initialized.
  *
- * \return              The name of the cipher, or NULL if \p ctx has not
- *                      been not initialized.
+ * \return              The name of the cipher.
+ * \return              NULL if \p ctx has not been not initialized.
  */
 static inline const char *mbedtls_cipher_get_name( const mbedtls_cipher_context_t *ctx )
 {
@@ -455,8 +464,8 @@
  *
  * \param ctx           The context of the cipher. Must be initialized.
  *
- * \return              The key length of the cipher in bits, or
- *                      #MBEDTLS_KEY_LENGTH_NONE if ctx \p has not been
+ * \return              The key length of the cipher in bits.
+ * \return              #MBEDTLS_KEY_LENGTH_NONE if ctx \p has not been
  *                      initialized.
  */
 static inline int mbedtls_cipher_get_key_bitlen( const mbedtls_cipher_context_t *ctx )
@@ -472,9 +481,8 @@
  *
  * \param ctx      The context of the cipher. Must be initialized.
  *
- * \return         The type of operation: #MBEDTLS_ENCRYPT or
- *                 #MBEDTLS_DECRYPT, or #MBEDTLS_OPERATION_NONE if \p ctx
- *                 has not been initialized.
+ * \return         The type of operation: #MBEDTLS_ENCRYPT or #MBEDTLS_DECRYPT.
+ * \return         #MBEDTLS_OPERATION_NONE if \p ctx has not been initialized.
  */
 static inline mbedtls_operation_t mbedtls_cipher_get_operation( const mbedtls_cipher_context_t *ctx )
 {
@@ -495,9 +503,10 @@
  * \param operation     The operation that the key will be used for:
  *                      #MBEDTLS_ENCRYPT or #MBEDTLS_DECRYPT.
  *
- * \returns             \c 0 on success, #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA if
- *                      parameter verification fails, or a cipher-specific
- *                      error code.
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
+ *                      parameter-verification failure.
+ * \return              A cipher-specific error code on failure.
  */
 int mbedtls_cipher_setkey( mbedtls_cipher_context_t *ctx, const unsigned char *key,
                    int key_bitlen, const mbedtls_operation_t operation );
@@ -512,9 +521,10 @@
  * \param ctx           The generic cipher context.
  * \param mode          The padding mode.
  *
- * \returns             \c 0 on success, #MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE
- *                      if the selected padding mode is not supported, or
- *                      #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA if the cipher mode
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE
+ *                      if the selected padding mode is not supported.
+ * \return              #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA if the cipher mode
  *                      does not support padding.
  */
 int mbedtls_cipher_set_padding_mode( mbedtls_cipher_context_t *ctx, mbedtls_cipher_padding_t mode );
@@ -524,15 +534,17 @@
  * \brief           This function sets the initialization vector (IV)
  *                  or nonce.
  *
+ * \note            Some ciphers do not use IVs nor nonce. For these
+ *                  ciphers, this function has no effect.
+ *
  * \param ctx       The generic cipher context.
  * \param iv        The IV to use, or NONCE_COUNTER for CTR-mode ciphers.
  * \param iv_len    The IV length for ciphers with variable-size IV.
  *                  This parameter is discarded by ciphers with fixed-size IV.
  *
- * \returns         \c 0 on success, or #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA
- *
- * \note            Some ciphers do not use IVs nor nonce. For these
- *                  ciphers, this function has no effect.
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
+ *                  parameter-verification failure.
  */
 int mbedtls_cipher_set_iv( mbedtls_cipher_context_t *ctx,
                    const unsigned char *iv, size_t iv_len );
@@ -542,8 +554,9 @@
  *
  * \param ctx     The generic cipher context.
  *
- * \returns       \c 0 on success, #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA
- *                if parameter verification fails.
+ * \return        \c 0 on success.
+ * \return        #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
+ *                parameter-verification failure.
  */
 int mbedtls_cipher_reset( mbedtls_cipher_context_t *ctx );
 
@@ -557,7 +570,8 @@
  * \param ad            The additional data to use.
  * \param ad_len        the Length of \p ad.
  *
- * \return              \c 0 on success, or a specific error code on failure.
+ * \return              \c 0 on success.
+ * \return              A specific error code on failure.
  */
 int mbedtls_cipher_update_ad( mbedtls_cipher_context_t *ctx,
                       const unsigned char *ad, size_t ad_len );
@@ -573,6 +587,11 @@
  *                      Exception: For MBEDTLS_MODE_ECB, expects a single block
  *                      in size. For example, 16 Bytes for AES.
  *
+ * \note                If the underlying cipher is used in GCM mode, all calls
+ *                      to this function, except for the last one before
+ *                      mbedtls_cipher_finish(), must have \p ilen as a
+ *                      multiple of the block size of the cipher.
+ *
  * \param ctx           The generic cipher context.
  * \param input         The buffer holding the input data.
  * \param ilen          The length of the input data.
@@ -582,16 +601,12 @@
  * \param olen          The length of the output data, to be updated with the
  *                      actual number of Bytes written.
  *
- * \returns             \c 0 on success, #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA if
- *                      parameter verification fails,
- *                      #MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE on an
- *                      unsupported mode for a cipher, or a cipher-specific
- *                      error code.
- *
- * \note                If the underlying cipher is GCM, all calls to this
- *                      function, except the last one before
- *                      mbedtls_cipher_finish(). Must have \p ilen as a
- *                      multiple of the block_size.
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
+ *                      parameter-verification failure.
+ * \return              #MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE on an
+ *                      unsupported mode for a cipher.
+ * \return              A cipher-specific error code on failure.
  */
 int mbedtls_cipher_update( mbedtls_cipher_context_t *ctx, const unsigned char *input,
                    size_t ilen, unsigned char *output, size_t *olen );
@@ -606,13 +621,14 @@
  * \param output        The buffer to write data to. Needs block_size available.
  * \param olen          The length of the data written to the \p output buffer.
  *
- * \returns             \c 0 on success, #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA if
- *                      parameter verification fails,
- *                      #MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED if decryption
- *                      expected a full block but was not provided one,
- *                      #MBEDTLS_ERR_CIPHER_INVALID_PADDING on invalid padding
- *                      while decrypting, or a cipher-specific error code
- *                      on failure for any other reason.
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
+ *                      parameter-verification failure.
+ * \return              #MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED on decryption
+ *                      expecting a full block but not receiving one.
+ * \return              #MBEDTLS_ERR_CIPHER_INVALID_PADDING on invalid padding
+ *                      while decrypting.
+ * \return              A cipher-specific error code on failure.
  */
 int mbedtls_cipher_finish( mbedtls_cipher_context_t *ctx,
                    unsigned char *output, size_t *olen );
@@ -627,7 +643,8 @@
  * \param tag           The buffer to write the tag to.
  * \param tag_len       The length of the tag to write.
  *
- * \return              \c 0 on success, or a specific error code on failure.
+ * \return              \c 0 on success.
+ * \return              A specific error code on failure.
  */
 int mbedtls_cipher_write_tag( mbedtls_cipher_context_t *ctx,
                       unsigned char *tag, size_t tag_len );
@@ -641,7 +658,8 @@
  * \param tag           The buffer holding the tag.
  * \param tag_len       The length of the tag to check.
  *
- * \return              \c 0 on success, or a specific error code on failure.
+ * \return              \c 0 on success.
+ * \return              A specific error code on failure.
  */
 int mbedtls_cipher_check_tag( mbedtls_cipher_context_t *ctx,
                       const unsigned char *tag, size_t tag_len );
@@ -667,13 +685,14 @@
  * \note                Some ciphers do not use IVs nor nonce. For these
  *                      ciphers, use \p iv = NULL and \p iv_len = 0.
  *
- * \returns             \c 0 on success, or
- *                      #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA, or
- *                      #MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED if decryption
- *                      expected a full block but was not provided one, or
- *                      #MBEDTLS_ERR_CIPHER_INVALID_PADDING on invalid padding
- *                      while decrypting, or a cipher-specific error code on
- *                      failure for any other reason.
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
+ *                      parameter-verification failure.
+ * \return              #MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED on decryption
+ *                      expecting a full block but not receiving one.
+ * \return              #MBEDTLS_ERR_CIPHER_INVALID_PADDING on invalid padding
+ *                      while decrypting.
+ * \return              A cipher-specific error code on failure.
  */
 int mbedtls_cipher_crypt( mbedtls_cipher_context_t *ctx,
                   const unsigned char *iv, size_t iv_len,
@@ -699,9 +718,10 @@
  * \param tag           The buffer for the authentication tag.
  * \param tag_len       The desired length of the authentication tag.
  *
- * \returns             \c 0 on success, or
- *                      #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA, or
- *                      a cipher-specific error code.
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
+ *                      parameter-verification failure.
+ * \return              A cipher-specific error code on failure.
  */
 int mbedtls_cipher_auth_encrypt( mbedtls_cipher_context_t *ctx,
                          const unsigned char *iv, size_t iv_len,
@@ -713,6 +733,10 @@
 /**
  * \brief               The generic autenticated decryption (AEAD) function.
  *
+ * \note                If the data is not authentic, then the output buffer
+ *                      is zeroed out to prevent the unauthentic plaintext being
+ *                      used, making this interface safer.
+ *
  * \param ctx           The generic cipher context.
  * \param iv            The IV to use, or NONCE_COUNTER for CTR-mode ciphers.
  * \param iv_len        The IV length for ciphers with variable-size IV.
@@ -728,14 +752,11 @@
  * \param tag           The buffer holding the authentication tag.
  * \param tag_len       The length of the authentication tag.
  *
- * \returns             \c 0 on success, or
- *                      #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA, or
- *                      #MBEDTLS_ERR_CIPHER_AUTH_FAILED if data is not authentic,
- *                      or a cipher-specific error code on failure for any other reason.
- *
- * \note                If the data is not authentic, then the output buffer
- *                      is zeroed out to prevent the unauthentic plaintext being
- *                      used, making this interface safer.
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
+ *                      parameter-verification failure.
+ * \return              #MBEDTLS_ERR_CIPHER_AUTH_FAILED if data is not authentic.
+ * \return              A cipher-specific error code on failure.
  */
 int mbedtls_cipher_auth_decrypt( mbedtls_cipher_context_t *ctx,
                          const unsigned char *iv, size_t iv_len,
diff --git a/include/mbedtls/dhm.h b/include/mbedtls/dhm.h
index 1bf572a..f848e22 100644
--- a/include/mbedtls/dhm.h
+++ b/include/mbedtls/dhm.h
@@ -1,7 +1,13 @@
 /**
  * \file dhm.h
  *
- * \brief Diffie-Hellman-Merkle key exchange.
+ * \brief   This file contains Diffie-Hellman-Merkle (DHM) key exchange 
+ *          definitions and functions.
+ *
+ * Diffie-Hellman-Merkle (DHM) key exchange is defined in
+ * <em>RFC-2631: Diffie-Hellman Key Agreement Method</em> and 
+ * <em>Public-Key Cryptography Standards (PKCS) #3: Diffie 
+ * Hellman Key Agreement Standard</em>.
  *
  * <em>RFC-3526: More Modular Exponential (MODP) Diffie-Hellman groups for
  * Internet Key Exchange (IKE)</em> defines a number of standardized
@@ -130,8 +136,8 @@
  *                 failures.
  * \param end      The end of the input buffer.
  *
- * \return         \c 0 on success, or an \c MBEDTLS_ERR_DHM_XXX error code
- *                 on failure.
+ * \return         \c 0 on success.
+ * \return         An \c MBEDTLS_ERR_DHM_XXX error code on failure.
  */
 int mbedtls_dhm_read_params( mbedtls_dhm_context *ctx,
                      unsigned char **p,
@@ -141,13 +147,6 @@
  * \brief          This function sets up and writes the ServerKeyExchange
  *                 parameters.
  *
- * \param ctx      The DHM context.
- * \param x_size   The private value size in Bytes.
- * \param olen     The number of characters written.
- * \param output   The destination buffer.
- * \param f_rng    The RNG function.
- * \param p_rng    The RNG parameter.
- *
  * \note           The destination buffer must be large enough to hold
  *                 the reduced binary presentation of the modulus, the generator
  *                 and the public key, each wrapped with a 2-byte length field.
@@ -160,8 +159,15 @@
  *                 mbedtls_dhm_set_group() below in conjunction with
  *                 mbedtls_mpi_read_binary() and mbedtls_mpi_read_string().
  *
- * \return         \c 0 on success, or an \c MBEDTLS_ERR_DHM_XXX error code
- *                 on failure.
+ * \param ctx      The DHM context.
+ * \param x_size   The private key size in Bytes.
+ * \param olen     The number of characters written.
+ * \param output   The destination buffer.
+ * \param f_rng    The RNG function.
+ * \param p_rng    The RNG context.
+ *
+ * \return         \c 0 on success.
+ * \return         An \c MBEDTLS_ERR_DHM_XXX error code on failure.
  */
 int mbedtls_dhm_make_params( mbedtls_dhm_context *ctx, int x_size,
                      unsigned char *output, size_t *olen,
@@ -169,54 +175,54 @@
                      void *p_rng );
 
 /**
- * \brief          Set prime modulus and generator
+ * \brief          This function sets the prime modulus and generator.
+ *
+ * \note           This function can be used to set \p P, \p G
+ *                 in preparation for mbedtls_dhm_make_params().
  *
  * \param ctx      The DHM context.
- * \param P        The MPI holding DHM prime modulus.
- * \param G        The MPI holding DHM generator.
+ * \param P        The MPI holding the DHM prime modulus.
+ * \param G        The MPI holding the DHM generator.
  *
- * \note           This function can be used to set P, G
- *                 in preparation for \c mbedtls_dhm_make_params.
- *
- * \return         \c 0 if successful, or an \c MBEDTLS_ERR_DHM_XXX error code
- *                 on failure.
+ * \return         \c 0 if successful.
+ * \return         An \c MBEDTLS_ERR_DHM_XXX error code on failure.
  */
 int mbedtls_dhm_set_group( mbedtls_dhm_context *ctx,
                            const mbedtls_mpi *P,
                            const mbedtls_mpi *G );
 
 /**
- * \brief          This function imports the public value G^Y of the peer.
+ * \brief          This function imports the public value of the peer, G^Y.
  *
  * \param ctx      The DHM context.
- * \param input    The input buffer.
+ * \param input    The input buffer containing the G^Y value of the peer.
  * \param ilen     The size of the input buffer.
  *
- * \return         \c 0 on success, or an \c MBEDTLS_ERR_DHM_XXX error code
- *                 on failure.
+ * \return         \c 0 on success.
+ * \return         An \c MBEDTLS_ERR_DHM_XXX error code on failure.
  */
 int mbedtls_dhm_read_public( mbedtls_dhm_context *ctx,
                      const unsigned char *input, size_t ilen );
 
 /**
- * \brief          This function creates its own private value \c X and
+ * \brief          This function creates its own private key, \c X, and
  *                 exports \c G^X.
  *
+ * \note           The destination buffer is always fully written
+ *                 so as to contain a big-endian representation of G^X mod P.
+ *                 If it is larger than ctx->len, it is padded accordingly
+ *                 with zero-bytes at the beginning.
+ *
  * \param ctx      The DHM context.
- * \param x_size   The private value size in Bytes.
+ * \param x_size   The private key size in Bytes.
  * \param output   The destination buffer.
  * \param olen     The length of the destination buffer. Must be at least
-                   equal to ctx->len (the size of \c P).
+ *                  equal to ctx->len (the size of \c P).
  * \param f_rng    The RNG function.
- * \param p_rng    The RNG parameter.
+ * \param p_rng    The RNG context.
  *
- * \note           The destination buffer will always be fully written
- *                 so as to contain a big-endian presentation of G^X mod P.
- *                 If it is larger than ctx->len, it will accordingly be
- *                 padded with zero-bytes in the beginning.
- *
- * \return         \c 0 on success, or an \c MBEDTLS_ERR_DHM_XXX error code
- *                 on failure.
+ * \return         \c 0 on success.
+ * \return         An \c MBEDTLS_ERR_DHM_XXX error code on failure.
  */
 int mbedtls_dhm_make_public( mbedtls_dhm_context *ctx, int x_size,
                      unsigned char *output, size_t olen,
@@ -227,22 +233,22 @@
  * \brief               This function derives and exports the shared secret
  *                      \c (G^Y)^X mod \c P.
  *
+ * \note                If \p f_rng is not NULL, it is used to blind the input as
+ *                      a countermeasure against timing attacks. Blinding is used
+ *                      only if our private key \c X is re-used, and not used
+ *                      otherwise. We recommend always passing a non-NULL
+ *                      \p f_rng argument.
+ *
  * \param ctx           The DHM context.
  * \param output        The destination buffer.
  * \param output_size   The size of the destination buffer. Must be at least
- *                      the size of ctx->len.
+ *                      the size of ctx->len (the size of \c P).
  * \param olen          On exit, holds the actual number of Bytes written.
  * \param f_rng         The RNG function, for blinding purposes.
- * \param p_rng         The RNG parameter.
+ * \param p_rng         The RNG context.
  *
- * \return         \c 0 on success, or an \c MBEDTLS_ERR_DHM_XXX error code
- *                 on failure.
- *
- * \note           If non-NULL, \p f_rng is used to blind the input as
- *                 a countermeasure against timing attacks. Blinding is used
- *                 only if our secret value \p X is re-used and omitted
- *                 otherwise. Therefore, we recommend always passing a
- *                 non-NULL \p f_rng argument.
+ * \return              \c 0 on success.
+ * \return              An \c MBEDTLS_ERR_DHM_XXX error code on failure.
  */
 int mbedtls_dhm_calc_secret( mbedtls_dhm_context *ctx,
                      unsigned char *output, size_t output_size, size_t *olen,
@@ -250,7 +256,7 @@
                      void *p_rng );
 
 /**
- * \brief          This function frees and clears the components of a DHM key.
+ * \brief          This function frees and clears the components of a DHM context.
  *
  * \param ctx      The DHM context to free and clear.
  */
@@ -266,8 +272,9 @@
  * \param dhminlen    The size of the buffer, including the terminating null
  *                    Byte for PEM data.
  *
- * \return            \c 0 on success, or a specific DHM or PEM error code
- *                    on failure.
+ * \return            \c 0 on success.
+ * \return            An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX error code
+ *                    error code on failure.
  */
 int mbedtls_dhm_parse_dhm( mbedtls_dhm_context *dhm, const unsigned char *dhmin,
                    size_t dhminlen );
@@ -280,8 +287,9 @@
  * \param dhm      The DHM context to load the parameters to.
  * \param path     The filename to read the DHM parameters from.
  *
- * \return         \c 0 on success, or a specific DHM or PEM error code
- *                 on failure.
+ * \return         \c 0 on success.
+ * \return            An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX error code
+ *                    error code on failure.
  */
 int mbedtls_dhm_parse_dhmfile( mbedtls_dhm_context *dhm, const char *path );
 #endif /* MBEDTLS_FS_IO */
@@ -290,7 +298,8 @@
 /**
  * \brief          The DMH checkup routine.
  *
- * \return         \c 0 on success, or \c 1 on failure.
+ * \return         \c 0 on success.
+ * \return         \c 1 on failure.
  */
 int mbedtls_dhm_self_test( int verbose );
 
diff --git a/include/mbedtls/ecdsa.h b/include/mbedtls/ecdsa.h
index ff6efbc..ce1a03d 100644
--- a/include/mbedtls/ecdsa.h
+++ b/include/mbedtls/ecdsa.h
@@ -1,9 +1,10 @@
 /**
  * \file ecdsa.h
  *
- * \brief The Elliptic Curve Digital Signature Algorithm (ECDSA).
+ * \brief This file contains ECDSA definitions and functions.
  *
- * ECDSA is defined in <em>Standards for Efficient Cryptography Group (SECG):
+ * The Elliptic Curve Digital Signature Algorithm (ECDSA) is defined in
+ * <em>Standards for Efficient Cryptography Group (SECG):
  * SEC1 Elliptic Curve Cryptography</em>.
  * The use of ECDSA for TLS is defined in <em>RFC-4492: Elliptic Curve
  * Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS)</em>.
@@ -69,6 +70,14 @@
  *
  * \note            The deterministic version is usually preferred.
  *
+ * \note            If the bitlength of the message hash is larger than the
+ *                  bitlength of the group order, then the hash is truncated
+ *                  as defined in <em>Standards for Efficient Cryptography Group
+ *                  (SECG): SEC1 Elliptic Curve Cryptography</em>, section
+ *                  4.1.3, step 5.
+ *
+ * \see             ecp.h
+ *
  * \param grp       The ECP group.
  * \param r         The first output integer.
  * \param s         The second output integer.
@@ -76,18 +85,11 @@
  * \param buf       The message hash.
  * \param blen      The length of \p buf.
  * \param f_rng     The RNG function.
- * \param p_rng     The RNG parameter.
+ * \param p_rng     The RNG context.
  *
- * \note            If the bitlength of the message hash is larger than the
- *                  bitlength of the group order, then the hash is truncated
- *                  as defined in <em>Standards for Efficient Cryptography Group
- *                  (SECG): SEC1 Elliptic Curve Cryptography</em>, section
- *                  4.1.3, step 5.
- *
- * \return          \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX
  *                  or \c MBEDTLS_MPI_XXX error code on failure.
- *
- * \see             ecp.h
  */
 int mbedtls_ecdsa_sign( mbedtls_ecp_group *grp, mbedtls_mpi *r, mbedtls_mpi *s,
                 const mbedtls_mpi *d, const unsigned char *buf, size_t blen,
@@ -97,10 +99,19 @@
 /**
  * \brief           This function computes the ECDSA signature of a
  *                  previously-hashed message, deterministic version.
+ *
  *                  For more information, see <em>RFC-6979: Deterministic
  *                  Usage of the Digital Signature Algorithm (DSA) and Elliptic
  *                  Curve Digital Signature Algorithm (ECDSA)</em>.
  *
+ * \note            If the bitlength of the message hash is larger than the
+ *                  bitlength of the group order, then the hash is truncated as
+ *                  defined in <em>Standards for Efficient Cryptography Group
+ *                  (SECG): SEC1 Elliptic Curve Cryptography</em>, section
+ *                  4.1.3, step 5.
+ *
+ * \see             ecp.h
+ *
  * \param grp       The ECP group.
  * \param r         The first output integer.
  * \param s         The second output integer.
@@ -109,17 +120,9 @@
  * \param blen      The length of \p buf.
  * \param md_alg    The MD algorithm used to hash the message.
  *
- * \note            If the bitlength of the message hash is larger than the
- *                  bitlength of the group order, then the hash is truncated as
- *                  defined in <em>Standards for Efficient Cryptography Group
- *                  (SECG): SEC1 Elliptic Curve Cryptography</em>, section
- *                  4.1.3, step 5.
- *
- * \return          \c 0 on success,
- *                  or an \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX
  *                  error code on failure.
- *
- * \see             ecp.h
  */
 int mbedtls_ecdsa_sign_det( mbedtls_ecp_group *grp, mbedtls_mpi *r, mbedtls_mpi *s,
                     const mbedtls_mpi *d, const unsigned char *buf, size_t blen,
@@ -130,6 +133,14 @@
  * \brief           This function verifies the ECDSA signature of a
  *                  previously-hashed message.
  *
+ * \note            If the bitlength of the message hash is larger than the
+ *                  bitlength of the group order, then the hash is truncated as
+ *                  defined in <em>Standards for Efficient Cryptography Group
+ *                  (SECG): SEC1 Elliptic Curve Cryptography</em>, section
+ *                  4.1.4, step 3.
+ *
+ * \see             ecp.h
+ *
  * \param grp       The ECP group.
  * \param buf       The message hash.
  * \param blen      The length of \p buf.
@@ -137,18 +148,11 @@
  * \param r         The first integer of the signature.
  * \param s         The second integer of the signature.
  *
- * \note            If the bitlength of the message hash is larger than the
- *                  bitlength of the group order, then the hash is truncated as
- *                  defined in <em>Standards for Efficient Cryptography Group
- *                  (SECG): SEC1 Elliptic Curve Cryptography</em>, section
- *                  4.1.4, step 3.
- *
- * \return          \c 0 on success,
- *                  #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if signature is invalid,
- *                  or an \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the signature
+ *                  is invalid.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX
  *                  error code on failure for any other reason.
- *
- * \see             ecp.h
  */
 int mbedtls_ecdsa_verify( mbedtls_ecp_group *grp,
                   const unsigned char *buf, size_t blen,
@@ -169,15 +173,6 @@
  *                  of the Digital Signature Algorithm (DSA) and Elliptic
  *                  Curve Digital Signature Algorithm (ECDSA)</em>.
  *
- * \param ctx       The ECDSA context.
- * \param md_alg    The message digest that was used to hash the message.
- * \param hash      The message hash.
- * \param hlen      The length of the hash.
- * \param sig       The buffer that holds the signature.
- * \param slen      The length of the signature written.
- * \param f_rng     The RNG function.
- * \param p_rng     The RNG parameter.
- *
  * \note            The \p sig buffer must be at least twice as large as the
  *                  size of the curve used, plus 9. For example, 73 Bytes if
  *                  a 256-bit curve is used. A buffer length of
@@ -189,11 +184,20 @@
  *                  (SECG): SEC1 Elliptic Curve Cryptography</em>, section
  *                  4.1.3, step 5.
  *
- * \return          \c 0 on success,
- *                  or an \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
- *                  \c MBEDTLS_ERR_ASN1_XXX error code on failure.
- *
  * \see             ecp.h
+ *
+ * \param ctx       The ECDSA context.
+ * \param md_alg    The message digest that was used to hash the message.
+ * \param hash      The message hash.
+ * \param hlen      The length of the hash.
+ * \param sig       The buffer that holds the signature.
+ * \param slen      The length of the signature written.
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG context.
+ *
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
+ *                  \c MBEDTLS_ERR_ASN1_XXX error code on failure.
  */
 int mbedtls_ecdsa_write_signature( mbedtls_ecdsa_context *ctx, mbedtls_md_type_t md_alg,
                            const unsigned char *hash, size_t hlen,
@@ -209,26 +213,17 @@
 #define MBEDTLS_DEPRECATED
 #endif
 /**
- * \brief   This function computes an ECDSA signature and writes it to a buffer,
- *          serialized as defined in <em>RFC-4492: Elliptic Curve Cryptography
- *          (ECC) Cipher Suites for Transport Layer Security (TLS)</em>.
+ * \brief           This function computes an ECDSA signature and writes
+ *                  it to a buffer, serialized as defined in <em>RFC-4492:
+ *                  Elliptic Curve Cryptography (ECC) Cipher Suites for
+ *                  Transport Layer Security (TLS)</em>.
  *
- *          The deterministic version is defined in <em>RFC-6979:
- *          Deterministic Usage of the Digital Signature Algorithm (DSA) and
- *          Elliptic Curve Digital Signature Algorithm (ECDSA)</em>.
+ *                  The deterministic version is defined in <em>RFC-6979:
+ *                  Deterministic Usage of the Digital Signature Algorithm (DSA)
+ *                  and Elliptic Curve Digital Signature Algorithm (ECDSA)</em>.
  *
  * \warning         It is not thread-safe to use the same context in
  *                  multiple threads.
-
- *
- * \deprecated      Superseded by mbedtls_ecdsa_write_signature() in 2.0.0
- *
- * \param ctx       The ECDSA context.
- * \param hash      The Message hash.
- * \param hlen      The length of the hash.
- * \param sig       The buffer that holds the signature.
- * \param slen      The length of the signature written.
- * \param md_alg    The MD algorithm used to hash the message.
  *
  * \note            The \p sig buffer must be at least twice as large as the
  *                  size of the curve used, plus 9. For example, 73 Bytes if a
@@ -241,11 +236,21 @@
  *                  (SECG): SEC1 Elliptic Curve Cryptography</em>, section
  *                  4.1.3, step 5.
  *
- * \return          \c 0 on success,
- *                  or an \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
- *                  \c MBEDTLS_ERR_ASN1_XXX error code on failure.
- *
  * \see             ecp.h
+ *
+ * \deprecated      Superseded by mbedtls_ecdsa_write_signature() in
+ *                  Mbed TLS version 2.0 and later.
+ *
+ * \param ctx       The ECDSA context.
+ * \param hash      The message hash.
+ * \param hlen      The length of the hash.
+ * \param sig       The buffer that holds the signature.
+ * \param slen      The length of the signature written.
+ * \param md_alg    The MD algorithm used to hash the message.
+ *
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
+ *                  \c MBEDTLS_ERR_ASN1_XXX error code on failure.
  */
 int mbedtls_ecdsa_write_signature_det( mbedtls_ecdsa_context *ctx,
                                const unsigned char *hash, size_t hlen,
@@ -258,26 +263,26 @@
 /**
  * \brief           This function reads and verifies an ECDSA signature.
  *
- * \param ctx       The ECDSA context.
- * \param hash      The message hash.
- * \param hlen      The size of the hash.
- * \param sig       The signature to read and verify.
- * \param slen      The size of \p sig.
- *
  * \note            If the bitlength of the message hash is larger than the
  *                  bitlength of the group order, then the hash is truncated as
  *                  defined in <em>Standards for Efficient Cryptography Group
  *                  (SECG): SEC1 Elliptic Curve Cryptography</em>, section
  *                  4.1.4, step 3.
  *
- * \return          \c 0 on success,
- *                  #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if signature is invalid,
- *                  #MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH if there is a valid
- *                  signature in sig but its length is less than \p siglen,
- *                  or an \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_ERR_MPI_XXX
- *                  error code on failure for any other reason.
- *
  * \see             ecp.h
+ *
+ * \param ctx       The ECDSA context.
+ * \param hash      The message hash.
+ * \param hlen      The size of the hash.
+ * \param sig       The signature to read and verify.
+ * \param slen      The size of \p sig.
+ *
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if signature is invalid.
+ * \return          #MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH if there is a valid
+ *                  signature in \p sig, but its length is less than \p siglen.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_ERR_MPI_XXX
+ *                  error code on failure for any other reason.
  */
 int mbedtls_ecdsa_read_signature( mbedtls_ecdsa_context *ctx,
                           const unsigned char *hash, size_t hlen,
@@ -286,16 +291,16 @@
 /**
  * \brief          This function generates an ECDSA keypair on the given curve.
  *
+ * \see            ecp.h
+ *
  * \param ctx      The ECDSA context to store the keypair in.
  * \param gid      The elliptic curve to use. One of the various
  *                 \c MBEDTLS_ECP_DP_XXX macros depending on configuration.
  * \param f_rng    The RNG function.
- * \param p_rng    The RNG parameter.
+ * \param p_rng    The RNG context.
  *
- * \return         \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX code on
- *                 failure.
- *
- * \see            ecp.h
+ * \return         \c 0 on success.
+ * \return         An \c MBEDTLS_ERR_ECP_XXX code on failure.
  */
 int mbedtls_ecdsa_genkey( mbedtls_ecdsa_context *ctx, mbedtls_ecp_group_id gid,
                   int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
@@ -303,13 +308,13 @@
 /**
  * \brief           This function sets an ECDSA context from an EC key pair.
  *
+ * \see             ecp.h
+ *
  * \param ctx       The ECDSA context to set.
  * \param key       The EC key to use.
  *
- * \return          \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX code on
- *                  failure.
- *
- * \see             ecp.h
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX code on failure.
  */
 int mbedtls_ecdsa_from_keypair( mbedtls_ecdsa_context *ctx, const mbedtls_ecp_keypair *key );
 
diff --git a/include/mbedtls/ecp.h b/include/mbedtls/ecp.h
index e063e4f..3ad74e6 100644
--- a/include/mbedtls/ecp.h
+++ b/include/mbedtls/ecp.h
@@ -1,10 +1,21 @@
 /**
  * \file ecp.h
  *
- * \brief Elliptic curves over GF(p)
+ * \brief This file provides an API for Elliptic Curves over GF(P) (ECP).
+ *
+ * The use of ECP in cryptography and TLS is defined in
+ * <em>Standards for Efficient Cryptography Group (SECG): SEC1
+ * Elliptic Curve Cryptography</em> and
+ * <em>RFC-4492: Elliptic Curve Cryptography (ECC) Cipher Suites
+ * for Transport Layer Security (TLS)</em>.
+ *
+ * <em>RFC-2409: The Internet Key Exchange (IKE)</em> defines ECP
+ * group types.
+ *
  */
+
 /*
- *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
  *  SPDX-License-Identifier: Apache-2.0
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may
@@ -19,8 +30,9 @@
  *  See the License for the specific language governing permissions and
  *  limitations under the License.
  *
- *  This file is part of mbed TLS (https://tls.mbed.org)
+ *  This file is part of Mbed TLS (https://tls.mbed.org)
  */
+
 #ifndef MBEDTLS_ECP_H
 #define MBEDTLS_ECP_H
 
@@ -31,77 +43,79 @@
  */
 #define MBEDTLS_ERR_ECP_BAD_INPUT_DATA                    -0x4F80  /**< Bad input parameters to function. */
 #define MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL                  -0x4F00  /**< The buffer is too small to write to. */
-#define MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE               -0x4E80  /**< Requested curve not available. */
+#define MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE               -0x4E80  /**< The requested feature is not available, for example, the requested curve is not supported. */
 #define MBEDTLS_ERR_ECP_VERIFY_FAILED                     -0x4E00  /**< The signature is not valid. */
 #define MBEDTLS_ERR_ECP_ALLOC_FAILED                      -0x4D80  /**< Memory allocation failed. */
-#define MBEDTLS_ERR_ECP_RANDOM_FAILED                     -0x4D00  /**< Generation of random value, such as (ephemeral) key, failed. */
+#define MBEDTLS_ERR_ECP_RANDOM_FAILED                     -0x4D00  /**< Generation of random value, such as ephemeral key, failed. */
 #define MBEDTLS_ERR_ECP_INVALID_KEY                       -0x4C80  /**< Invalid private or public key. */
 #define MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH                  -0x4C00  /**< The buffer contains a valid signature followed by more data. */
-#define MBEDTLS_ERR_ECP_HW_ACCEL_FAILED                   -0x4B80  /**< ECP hardware accelerator failed. */
+#define MBEDTLS_ERR_ECP_HW_ACCEL_FAILED                   -0x4B80  /**< The ECP hardware accelerator failed. */
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 /**
- * Domain parameters (curve, subgroup and generator) identifiers.
+ * Domain-parameter identifiers: curve, subgroup, and generator.
  *
- * Only curves over prime fields are supported.
+ * \note Only curves over prime fields are supported.
  *
  * \warning This library does not support validation of arbitrary domain
- * parameters. Therefore, only well-known domain parameters from trusted
+ * parameters. Therefore, only standardized domain parameters from trusted
  * sources should be used. See mbedtls_ecp_group_load().
  */
 typedef enum
 {
-    MBEDTLS_ECP_DP_NONE = 0,
-    MBEDTLS_ECP_DP_SECP192R1,      /*!< 192-bits NIST curve  */
-    MBEDTLS_ECP_DP_SECP224R1,      /*!< 224-bits NIST curve  */
-    MBEDTLS_ECP_DP_SECP256R1,      /*!< 256-bits NIST curve  */
-    MBEDTLS_ECP_DP_SECP384R1,      /*!< 384-bits NIST curve  */
-    MBEDTLS_ECP_DP_SECP521R1,      /*!< 521-bits NIST curve  */
-    MBEDTLS_ECP_DP_BP256R1,        /*!< 256-bits Brainpool curve */
-    MBEDTLS_ECP_DP_BP384R1,        /*!< 384-bits Brainpool curve */
-    MBEDTLS_ECP_DP_BP512R1,        /*!< 512-bits Brainpool curve */
-    MBEDTLS_ECP_DP_CURVE25519,     /*!< Curve25519               */
-    MBEDTLS_ECP_DP_CURVE448,       /*!< Curve448                 */
-    MBEDTLS_ECP_DP_SECP192K1,      /*!< 192-bits "Koblitz" curve */
-    MBEDTLS_ECP_DP_SECP224K1,      /*!< 224-bits "Koblitz" curve */
-    MBEDTLS_ECP_DP_SECP256K1,      /*!< 256-bits "Koblitz" curve */
+    MBEDTLS_ECP_DP_NONE = 0,       /*!< Curve not defined. */
+    MBEDTLS_ECP_DP_SECP192R1,      /*!< Domain parameters for the 192-bit curve defined by FIPS 186-4 and SEC1. */
+    MBEDTLS_ECP_DP_SECP224R1,      /*!< Domain parameters for the 224-bit curve defined by FIPS 186-4 and SEC1. */
+    MBEDTLS_ECP_DP_SECP256R1,      /*!< Domain parameters for the 256-bit curve defined by FIPS 186-4 and SEC1. */
+    MBEDTLS_ECP_DP_SECP384R1,      /*!< Domain parameters for the 384-bit curve defined by FIPS 186-4 and SEC1. */
+    MBEDTLS_ECP_DP_SECP521R1,      /*!< Domain parameters for the 521-bit curve defined by FIPS 186-4 and SEC1. */
+    MBEDTLS_ECP_DP_BP256R1,        /*!< Domain parameters for 256-bit Brainpool curve. */
+    MBEDTLS_ECP_DP_BP384R1,        /*!< Domain parameters for 384-bit Brainpool curve. */
+    MBEDTLS_ECP_DP_BP512R1,        /*!< Domain parameters for 512-bit Brainpool curve. */
+    MBEDTLS_ECP_DP_CURVE25519,     /*!< Domain parameters for Curve25519. */
+    MBEDTLS_ECP_DP_CURVE448,       /*!< Domain parameters for Curve448. */
+    MBEDTLS_ECP_DP_SECP192K1,      /*!< Domain parameters for 192-bit "Koblitz" curve. */
+    MBEDTLS_ECP_DP_SECP224K1,      /*!< Domain parameters for 224-bit "Koblitz" curve. */
+    MBEDTLS_ECP_DP_SECP256K1,      /*!< Domain parameters for 256-bit "Koblitz" curve. */
 } mbedtls_ecp_group_id;
 
 /**
- * Number of supported curves (plus one for NONE).
+ * The number of supported curves, plus one for #MBEDTLS_ECP_DP_NONE.
  *
- * (Montgomery curves excluded for now.)
+ * \note Montgomery curves are currently excluded.
  */
 #define MBEDTLS_ECP_DP_MAX     12
 
 /**
- * Curve information for use by other modules
+ * Curve information, for use by other modules.
  */
 typedef struct
 {
-    mbedtls_ecp_group_id grp_id;    /*!< Internal identifier        */
-    uint16_t tls_id;                /*!< TLS NamedCurve identifier  */
-    uint16_t bit_size;              /*!< Curve size in bits         */
-    const char *name;               /*!< Human-friendly name        */
+    mbedtls_ecp_group_id grp_id;    /*!< An internal identifier. */
+    uint16_t tls_id;                /*!< The TLS NamedCurve identifier. */
+    uint16_t bit_size;              /*!< The curve size in bits. */
+    const char *name;               /*!< A human-friendly name. */
 } mbedtls_ecp_curve_info;
 
 /**
- * \brief           ECP point structure (jacobian coordinates)
+ * \brief           The ECP point structure, in Jacobian coordinates.
  *
  * \note            All functions expect and return points satisfying
- *                  the following condition: Z == 0 or Z == 1. (Other
- *                  values of Z are used by internal functions only.)
- *                  The point is zero, or "at infinity", if Z == 0.
- *                  Otherwise, X and Y are its standard (affine) coordinates.
+ *                  the following condition: <code>Z == 0</code> or
+ *                  <code>Z == 1</code>. Other values of \p Z are
+ *                  used only by internal functions.
+ *                  The point is zero, or "at infinity", if <code>Z == 0</code>.
+ *                  Otherwise, \p X and \p Y are its standard (affine)
+ *                  coordinates.
  */
 typedef struct
 {
-    mbedtls_mpi X;          /*!<  the point's X coordinate  */
-    mbedtls_mpi Y;          /*!<  the point's Y coordinate  */
-    mbedtls_mpi Z;          /*!<  the point's Z coordinate  */
+    mbedtls_mpi X;          /*!< The X coordinate of the ECP point. */
+    mbedtls_mpi Y;          /*!< The Y coordinate of the ECP point. */
+    mbedtls_mpi Z;          /*!< The Z coordinate of the ECP point. */
 }
 mbedtls_ecp_point;
 
@@ -115,46 +129,55 @@
  */
 
 /**
- * \brief           ECP group structure
+ * \brief           The ECP group structure.
  *
- * We consider two types of curves equations:
- * 1. Short Weierstrass y^2 = x^3 + A x + B     mod P   (SEC1 + RFC 4492)
- * 2. Montgomery,       y^2 = x^3 + A x^2 + x   mod P   (Curve25519 + draft)
- * In both cases, a generator G for a prime-order subgroup is fixed. In the
- * short weierstrass, this subgroup is actually the whole curve, and its
- * cardinal is denoted by N.
+ * We consider two types of curve equations:
+ * <ul><li>Short Weierstrass: <code>y^2 = x^3 + A x + B mod P</code>
+ * (SEC1 + RFC-4492)</li>
+ * <li>Montgomery: <code>y^2 = x^3 + A x^2 + x mod P</code> (Curve25519,
+ * Curve448)</li></ul>
+ * In both cases, the generator (\p G) for a prime-order subgroup is fixed.
  *
- * In the case of Short Weierstrass curves, our code requires that N is an odd
- * prime. (Use odd in mbedtls_ecp_mul() and prime in mbedtls_ecdsa_sign() for blinding.)
+ * For Short Weierstrass, this subgroup is the whole curve, and its
+ * cardinality is denoted by \p N. Our code requires that \p N is an
+ * odd prime as mbedtls_ecp_mul() requires an odd number, and
+ * mbedtls_ecdsa_sign() requires that it is prime for blinding purposes.
  *
- * In the case of Montgomery curves, we don't store A but (A + 2) / 4 which is
- * the quantity actually used in the formulas. Also, nbits is not the size of N
- * but the required size for private keys.
+ * For Montgomery curves, we do not store \p A, but <code>(A + 2) / 4</code>,
+ * which is the quantity used in the formulas. Additionally, \p nbits is
+ * not the size of \p N but the required size for private keys.
  *
- * If modp is NULL, reduction modulo P is done using a generic algorithm.
- * Otherwise, it must point to a function that takes an mbedtls_mpi in the range
- * 0..2^(2*pbits)-1 and transforms it in-place in an integer of little more
- * than pbits, so that the integer may be efficiently brought in the 0..P-1
- * range by a few additions or substractions. It must return 0 on success and
- * non-zero on failure.
+ * If \p modp is NULL, reduction modulo \p P is done using a generic algorithm.
+ * Otherwise, \p modp must point to a function that takes an \p mbedtls_mpi in the
+ * range of <code>0..2^(2*pbits)-1</code>, and transforms it in-place to an integer
+ * which is congruent mod \p P to the given MPI, and is close enough to \p pbits
+ * in size, so that it may be efficiently brought in the 0..P-1 range by a few
+ * additions or subtractions. Therefore, it is only an approximative modular
+ * reduction. It must return 0 on success and non-zero on failure.
+ *
  */
 typedef struct
 {
-    mbedtls_ecp_group_id id;    /*!<  internal group identifier                     */
-    mbedtls_mpi P;              /*!<  prime modulus of the base field               */
-    mbedtls_mpi A;              /*!<  1. A in the equation, or 2. (A + 2) / 4       */
-    mbedtls_mpi B;              /*!<  1. B in the equation, or 2. unused            */
-    mbedtls_ecp_point G;        /*!<  generator of the (sub)group used              */
-    mbedtls_mpi N;              /*!<  the order of G                                */
-    size_t pbits;       /*!<  number of bits in P                           */
-    size_t nbits;       /*!<  number of bits in 1. P, or 2. private keys    */
-    unsigned int h;     /*!<  internal: 1 if the constants are static       */
-    int (*modp)(mbedtls_mpi *); /*!<  function for fast reduction mod P             */
-    int (*t_pre)(mbedtls_ecp_point *, void *);  /*!< unused                         */
-    int (*t_post)(mbedtls_ecp_point *, void *); /*!< unused                         */
-    void *t_data;                       /*!< unused                         */
-    mbedtls_ecp_point *T;       /*!<  pre-computed points for ecp_mul_comb()        */
-    size_t T_size;      /*!<  number for pre-computed points                */
+    mbedtls_ecp_group_id id;    /*!< An internal group identifier. */
+    mbedtls_mpi P;              /*!< The prime modulus of the base field. */
+    mbedtls_mpi A;              /*!< For Short Weierstrass: \p A in the equation. For
+                                     Montgomery curves: <code>(A + 2) / 4</code>. */
+    mbedtls_mpi B;              /*!< For Short Weierstrass: \p B in the equation.
+                                     For Montgomery curves: unused. */
+    mbedtls_ecp_point G;        /*!< The generator of the subgroup used. */
+    mbedtls_mpi N;              /*!< The order of \p G. */
+    size_t pbits;               /*!< The number of bits in \p P.*/
+    size_t nbits;               /*!< For Short Weierstrass: The number of bits in \p P.
+                                     For Montgomery curves: the number of bits in the
+                                     private keys. */
+    unsigned int h;             /*!< \internal 1 if the constants are static. */
+    int (*modp)(mbedtls_mpi *); /*!< The function for fast pseudo-reduction
+                                     mod \p P (see above).*/
+    int (*t_pre)(mbedtls_ecp_point *, void *);  /*!< Unused. */
+    int (*t_post)(mbedtls_ecp_point *, void *); /*!< Unused. */
+    void *t_data;               /*!< Unused. */
+    mbedtls_ecp_point *T;       /*!< Pre-computed points for ecp_mul_comb(). */
+    size_t T_size;              /*!< The number of pre-computed points. */
 }
 mbedtls_ecp_group;
 
@@ -162,15 +185,15 @@
  * \name SECTION: Module settings
  *
  * The configuration options you can set for this module are in this section.
- * Either change them in config.h or define them on the compiler command line.
+ * Either change them in config.h, or define them using the compiler command line.
  * \{
  */
 
 #if !defined(MBEDTLS_ECP_MAX_BITS)
 /**
- * Maximum size of the groups (that is, of N and P)
+ * The maximum size of the groups, that is, of \c N and \c P.
  */
-#define MBEDTLS_ECP_MAX_BITS     521   /**< Maximum bit size of groups */
+#define MBEDTLS_ECP_MAX_BITS     521   /**< The maximum size of groups, in bits. */
 #endif
 
 #define MBEDTLS_ECP_MAX_BYTES    ( ( MBEDTLS_ECP_MAX_BITS + 7 ) / 8 )
@@ -193,11 +216,10 @@
  *      521       145     141     135     120      97
  *      384       214     209     198     177     146
  *      256       320     320     303     262     226
-
  *      224       475     475     453     398     342
  *      192       640     640     633     587     476
  */
-#define MBEDTLS_ECP_WINDOW_SIZE    6   /**< Maximum window size used */
+#define MBEDTLS_ECP_WINDOW_SIZE    6   /**< The maximum window size used. */
 #endif /* MBEDTLS_ECP_WINDOW_SIZE */
 
 #if !defined(MBEDTLS_ECP_FIXED_POINT_OPTIM)
@@ -212,7 +234,7 @@
  *
  * Change this value to 0 to reduce peak memory usage.
  */
-#define MBEDTLS_ECP_FIXED_POINT_OPTIM  1   /**< Enable fixed-point speed-up */
+#define MBEDTLS_ECP_FIXED_POINT_OPTIM  1   /**< Enable fixed-point speed-up. */
 #endif /* MBEDTLS_ECP_FIXED_POINT_OPTIM */
 
 /* \} name SECTION: Module settings */
@@ -222,11 +244,12 @@
 #endif /* MBEDTLS_ECP_ALT */
 
 /**
- * \brief           ECP key pair structure
+ * \brief    The ECP key-pair structure.
  *
- * A generic key pair that could be used for ECDSA, fixed ECDH, etc.
+ * A generic key-pair that may be used for ECDSA and fixed ECDH, for example.
  *
- * \note Members purposefully in the same order as struc mbedtls_ecdsa_context.
+ * \note    Members are deliberately in the same order as in the
+ *          ::mbedtls_ecdsa_context structure.
  */
 typedef struct
 {
@@ -239,25 +262,27 @@
 /*
  * Point formats, from RFC 4492's enum ECPointFormat
  */
-#define MBEDTLS_ECP_PF_UNCOMPRESSED    0   /**< Uncompressed point format */
-#define MBEDTLS_ECP_PF_COMPRESSED      1   /**< Compressed point format */
+#define MBEDTLS_ECP_PF_UNCOMPRESSED    0   /**< Uncompressed point format. */
+#define MBEDTLS_ECP_PF_COMPRESSED      1   /**< Compressed point format. */
 
 /*
  * Some other constants from RFC 4492
  */
-#define MBEDTLS_ECP_TLS_NAMED_CURVE    3   /**< ECCurveType's named_curve */
+#define MBEDTLS_ECP_TLS_NAMED_CURVE    3   /**< The named_curve of ECCurveType. */
 
 /**
- * \brief           Get the list of supported curves in order of preferrence
- *                  (full information)
+ * \brief           This function retrieves the information defined in
+ *                  mbedtls_ecp_curve_info() for all supported curves in order
+ *                  of preference.
  *
- * \return          A statically allocated array, the last entry is 0.
+ * \return          A statically allocated array. The last entry is 0.
  */
 const mbedtls_ecp_curve_info *mbedtls_ecp_curve_list( void );
 
 /**
- * \brief           Get the list of supported curves in order of preferrence
- *                  (grp_id only)
+ * \brief           This function retrieves the list of internal group
+ *                  identifiers of all supported curves in the order of
+ *                  preference.
  *
  * \return          A statically allocated array,
  *                  terminated with MBEDTLS_ECP_DP_NONE.
@@ -265,357 +290,400 @@
 const mbedtls_ecp_group_id *mbedtls_ecp_grp_id_list( void );
 
 /**
- * \brief           Get curve information from an internal group identifier
+ * \brief           This function retrieves curve information from an internal
+ *                  group identifier.
  *
- * \param grp_id    A MBEDTLS_ECP_DP_XXX value
+ * \param grp_id    An \c MBEDTLS_ECP_DP_XXX value.
  *
- * \return          The associated curve information or NULL
+ * \return          The associated curve information on success.
+ * \return          NULL on failure.
  */
 const mbedtls_ecp_curve_info *mbedtls_ecp_curve_info_from_grp_id( mbedtls_ecp_group_id grp_id );
 
 /**
- * \brief           Get curve information from a TLS NamedCurve value
+ * \brief           This function retrieves curve information from a TLS
+ *                  NamedCurve value.
  *
- * \param tls_id    A MBEDTLS_ECP_DP_XXX value
+ * \param tls_id    An \c MBEDTLS_ECP_DP_XXX value.
  *
- * \return          The associated curve information or NULL
+ * \return          The associated curve information on success.
+ * \return          NULL on failure.
  */
 const mbedtls_ecp_curve_info *mbedtls_ecp_curve_info_from_tls_id( uint16_t tls_id );
 
 /**
- * \brief           Get curve information from a human-readable name
+ * \brief           This function retrieves curve information from a
+ *                  human-readable name.
  *
- * \param name      The name
+ * \param name      The human-readable name.
  *
- * \return          The associated curve information or NULL
+ * \return          The associated curve information on success.
+ * \return          NULL on failure.
  */
 const mbedtls_ecp_curve_info *mbedtls_ecp_curve_info_from_name( const char *name );
 
 /**
- * \brief           Initialize a point (as zero)
+ * \brief           This function initializes a point as zero.
+ *
+ * \param pt        The point to initialize.
  */
 void mbedtls_ecp_point_init( mbedtls_ecp_point *pt );
 
 /**
- * \brief           Initialize a group (to something meaningless)
+ * \brief           This function initializes an ECP group context
+ *                  without loading any domain parameters.
+ *
+ * \note            After this function is called, domain parameters
+ *                  for various ECP groups can be loaded through the
+ *                  mbedtls_ecp_load() or mbedtls_ecp_tls_read_group()
+ *                  functions.
  */
 void mbedtls_ecp_group_init( mbedtls_ecp_group *grp );
 
 /**
- * \brief           Initialize a key pair (as an invalid one)
+ * \brief           This function initializes a key pair as an invalid one.
+ *
+ * \param key       The key pair to initialize.
  */
 void mbedtls_ecp_keypair_init( mbedtls_ecp_keypair *key );
 
 /**
- * \brief           Free the components of a point
+ * \brief           This function frees the components of a point.
+ *
+ * \param pt        The point to free.
  */
 void mbedtls_ecp_point_free( mbedtls_ecp_point *pt );
 
 /**
- * \brief           Free the components of an ECP group
+ * \brief           This function frees the components of an ECP group.
+ * \param grp       The group to free.
  */
 void mbedtls_ecp_group_free( mbedtls_ecp_group *grp );
 
 /**
- * \brief           Free the components of a key pair
+ * \brief           This function frees the components of a key pair.
+ * \param key       The key pair to free.
  */
 void mbedtls_ecp_keypair_free( mbedtls_ecp_keypair *key );
 
 /**
- * \brief           Copy the contents of point Q into P
+ * \brief           This function copies the contents of point \p Q into
+ *                  point \p P.
  *
- * \param P         Destination point
- * \param Q         Source point
+ * \param P         The destination point.
+ * \param Q         The source point.
  *
- * \return          0 if successful,
- *                  MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
  */
 int mbedtls_ecp_copy( mbedtls_ecp_point *P, const mbedtls_ecp_point *Q );
 
 /**
- * \brief           Copy the contents of a group object
+ * \brief           This function copies the contents of group \p src into
+ *                  group \p dst.
  *
- * \param dst       Destination group
- * \param src       Source group
+ * \param dst       The destination group.
+ * \param src       The source group.
  *
- * \return          0 if successful,
- *                  MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
  */
 int mbedtls_ecp_group_copy( mbedtls_ecp_group *dst, const mbedtls_ecp_group *src );
 
 /**
- * \brief           Set a point to zero
+ * \brief           This function sets a point to zero.
  *
- * \param pt        Destination point
+ * \param pt        The point to set.
  *
- * \return          0 if successful,
- *                  MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
  */
 int mbedtls_ecp_set_zero( mbedtls_ecp_point *pt );
 
 /**
- * \brief           Tell if a point is zero
+ * \brief           This function checks if a point is zero.
  *
- * \param pt        Point to test
+ * \param pt        The point to test.
  *
- * \return          1 if point is zero, 0 otherwise
+ * \return          \c 1 if the point is zero.
+ * \return          \c 0 if the point is non-zero.
  */
 int mbedtls_ecp_is_zero( mbedtls_ecp_point *pt );
 
 /**
- * \brief           Compare two points
+ * \brief           This function compares two points.
  *
- * \note            This assumes the points are normalized. Otherwise,
+ * \note            This assumes that the points are normalized. Otherwise,
  *                  they may compare as "not equal" even if they are.
  *
- * \param P         First point to compare
- * \param Q         Second point to compare
+ * \param P         The first point to compare.
+ * \param Q         The second point to compare.
  *
- * \return          0 if the points are equal,
- *                  MBEDTLS_ERR_ECP_BAD_INPUT_DATA otherwise
+ * \return          \c 0 if the points are equal.
+ * \return          #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the points are not equal.
  */
 int mbedtls_ecp_point_cmp( const mbedtls_ecp_point *P,
                            const mbedtls_ecp_point *Q );
 
 /**
- * \brief           Import a non-zero point from two ASCII strings
+ * \brief           This function imports a non-zero point from two ASCII
+ *                  strings.
  *
- * \param P         Destination point
- * \param radix     Input numeric base
- * \param x         First affine coordinate as a null-terminated string
- * \param y         Second affine coordinate as a null-terminated string
+ * \param P         The destination point.
+ * \param radix     The numeric base of the input.
+ * \param x         The first affine coordinate, as a null-terminated string.
+ * \param y         The second affine coordinate, as a null-terminated string.
  *
- * \return          0 if successful, or a MBEDTLS_ERR_MPI_XXX error code
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_MPI_XXX error code on failure.
  */
 int mbedtls_ecp_point_read_string( mbedtls_ecp_point *P, int radix,
                            const char *x, const char *y );
 
 /**
- * \brief           Export a point into unsigned binary data
+ * \brief           This function exports a point into unsigned binary data.
  *
- * \param grp       Group to which the point should belong
- * \param P         Point to export
- * \param format    Point format, should be a MBEDTLS_ECP_PF_XXX macro
- * \param olen      Length of the actual output
- * \param buf       Output buffer
- * \param buflen    Length of the output buffer
+ * \param grp       The group to which the point should belong.
+ * \param P         The point to export.
+ * \param format    The point format. Should be an \c MBEDTLS_ECP_PF_XXX macro.
+ * \param olen      The length of the output.
+ * \param buf       The output buffer.
+ * \param buflen    The length of the output buffer.
  *
- * \return          0 if successful,
- *                  or MBEDTLS_ERR_ECP_BAD_INPUT_DATA
- *                  or MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_ECP_BAD_INPUT_DATA
+ *                  or #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL on failure.
  */
 int mbedtls_ecp_point_write_binary( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *P,
                             int format, size_t *olen,
                             unsigned char *buf, size_t buflen );
 
 /**
- * \brief           Import a point from unsigned binary data
+ * \brief           This function imports a point from unsigned binary data.
  *
- * \param grp       Group to which the point should belong
- * \param P         Point to import
- * \param buf       Input buffer
- * \param ilen      Actual length of input
+ * \note            This function does not check that the point actually
+ *                  belongs to the given group, see mbedtls_ecp_check_pubkey()
+ *                  for that.
  *
- * \return          0 if successful,
- *                  MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid,
- *                  MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
- *                  MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the point format
+ * \param grp       The group to which the point should belong.
+ * \param P         The point to import.
+ * \param buf       The input buffer.
+ * \param ilen      The length of the input.
+ *
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
+ * \return          #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
+ * \return          #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the point format
  *                  is not implemented.
  *
- * \note            This function does NOT check that the point actually
- *                  belongs to the given group, see mbedtls_ecp_check_pubkey() for
- *                  that.
  */
 int mbedtls_ecp_point_read_binary( const mbedtls_ecp_group *grp, mbedtls_ecp_point *P,
                            const unsigned char *buf, size_t ilen );
 
 /**
- * \brief           Import a point from a TLS ECPoint record
+ * \brief           This function imports a point from a TLS ECPoint record.
  *
- * \param grp       ECP group used
- * \param pt        Destination point
- * \param buf       $(Start of input buffer)
- * \param len       Buffer length
+ * \note            On function return, \p buf is updated to point to immediately
+ *                  after the ECPoint record.
  *
- * \note            buf is updated to point right after the ECPoint on exit
+ * \param grp       The ECP group used.
+ * \param pt        The destination point.
+ * \param buf       The address of the pointer to the start of the input buffer.
+ * \param len       The length of the buffer.
  *
- * \return          0 if successful,
- *                  MBEDTLS_ERR_MPI_XXX if initialization failed
- *                  MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_MPI_XXX error code on initialization failure.
+ * \return          #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
  */
 int mbedtls_ecp_tls_read_point( const mbedtls_ecp_group *grp, mbedtls_ecp_point *pt,
                         const unsigned char **buf, size_t len );
 
 /**
- * \brief           Export a point as a TLS ECPoint record
+ * \brief           This function exports a point as a TLS ECPoint record.
  *
- * \param grp       ECP group used
- * \param pt        Point to export
- * \param format    Export format
- * \param olen      length of data written
- * \param buf       Buffer to write to
- * \param blen      Buffer length
+ * \param grp       The ECP group used.
+ * \param pt        The point format to export to. The point format is an
+ *                  \c MBEDTLS_ECP_PF_XXX constant.
+ * \param format    The export format.
+ * \param olen      The length of the data written.
+ * \param buf       The buffer to write to.
+ * \param blen      The length of the buffer.
  *
- * \return          0 if successful,
- *                  or MBEDTLS_ERR_ECP_BAD_INPUT_DATA
- *                  or MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_ECP_BAD_INPUT_DATA or
+ *                  #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL on failure.
  */
 int mbedtls_ecp_tls_write_point( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *pt,
                          int format, size_t *olen,
                          unsigned char *buf, size_t blen );
 
 /**
- * \brief           Set a group using well-known domain parameters
+ * \brief           This function sets a group using standardized domain parameters.
  *
- * \param grp       Destination group
- * \param id        Index in the list of well-known domain parameters
+ * \note            The index should be a value of the NamedCurve enum,
+ *                  as defined in <em>RFC-4492: Elliptic Curve Cryptography
+ *                  (ECC) Cipher Suites for Transport Layer Security (TLS)</em>,
+ *                  usually in the form of an \c MBEDTLS_ECP_DP_XXX macro.
  *
- * \return          0 if successful,
- *                  MBEDTLS_ERR_MPI_XXX if initialization failed
- *                  MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE for unkownn groups
+ * \param grp       The destination group.
+ * \param id        The identifier of the domain parameter set to load.
  *
- * \note            Index should be a value of RFC 4492's enum NamedCurve,
- *                  usually in the form of a MBEDTLS_ECP_DP_XXX macro.
+ * \return          \c 0 on success,
+ * \return          An \c MBEDTLS_ERR_MPI_XXX error code on initialization failure.
+ * \return          #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE for unkownn groups.
+
  */
 int mbedtls_ecp_group_load( mbedtls_ecp_group *grp, mbedtls_ecp_group_id id );
 
 /**
- * \brief           Set a group from a TLS ECParameters record
+ * \brief           This function sets a group from a TLS ECParameters record.
  *
- * \param grp       Destination group
- * \param buf       &(Start of input buffer)
- * \param len       Buffer length
+ * \note            \p buf is updated to point right after the ECParameters record
+ *                  on exit.
  *
- * \note            buf is updated to point right after ECParameters on exit
+ * \param grp       The destination group.
+ * \param buf       The address of the pointer to the start of the input buffer.
+ * \param len       The length of the buffer.
  *
- * \return          0 if successful,
- *                  MBEDTLS_ERR_MPI_XXX if initialization failed
- *                  MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_MPI_XXX error code on initialization failure.
+ * \return          #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
  */
 int mbedtls_ecp_tls_read_group( mbedtls_ecp_group *grp, const unsigned char **buf, size_t len );
 
 /**
- * \brief           Write the TLS ECParameters record for a group
+ * \brief           This function writes the TLS ECParameters record for a group.
  *
- * \param grp       ECP group used
- * \param olen      Number of bytes actually written
- * \param buf       Buffer to write to
- * \param blen      Buffer length
+ * \param grp       The ECP group used.
+ * \param olen      The number of Bytes written.
+ * \param buf       The buffer to write to.
+ * \param blen      The length of the buffer.
  *
- * \return          0 if successful,
- *                  or MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL on failure.
  */
 int mbedtls_ecp_tls_write_group( const mbedtls_ecp_group *grp, size_t *olen,
                          unsigned char *buf, size_t blen );
 
 /**
- * \brief           Multiplication by an integer: R = m * P
- *                  (Not thread-safe to use same group in multiple threads)
+ * \brief           This function performs multiplication of a point by
+ *                  an integer: \p R = \p m * \p P.
  *
- * \note            In order to prevent timing attacks, this function
- *                  executes the exact same sequence of (base field)
- *                  operations for any valid m. It avoids any if-branch or
- *                  array index depending on the value of m.
+ *                  It is not thread-safe to use same group in multiple threads.
  *
- * \note            If f_rng is not NULL, it is used to randomize intermediate
- *                  results in order to prevent potential timing attacks
- *                  targeting these results. It is recommended to always
- *                  provide a non-NULL f_rng (the overhead is negligible).
+ * \note            To prevent timing attacks, this function
+ *                  executes the exact same sequence of base-field
+ *                  operations for any valid \p m. It avoids any if-branch or
+ *                  array index depending on the value of \p m.
  *
- * \param grp       ECP group
- * \param R         Destination point
- * \param m         Integer by which to multiply
- * \param P         Point to multiply
- * \param f_rng     RNG function (see notes)
- * \param p_rng     RNG parameter
+ * \note            If \p f_rng is not NULL, it is used to randomize
+ *                  intermediate results to prevent potential timing attacks
+ *                  targeting these results. We recommend always providing
+ *                  a non-NULL \p f_rng. The overhead is negligible.
  *
- * \return          0 if successful,
- *                  MBEDTLS_ERR_ECP_INVALID_KEY if m is not a valid privkey
- *                  or P is not a valid pubkey,
- *                  MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
+ * \param grp       The ECP group.
+ * \param R         The destination point.
+ * \param m         The integer by which to multiply.
+ * \param P         The point to multiply.
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG context.
+ *
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_ECP_INVALID_KEY if \p m is not a valid private
+ *                  key, or \p P is not a valid public key.
+ * \return          #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
  */
 int mbedtls_ecp_mul( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
              const mbedtls_mpi *m, const mbedtls_ecp_point *P,
              int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
 
 /**
- * \brief           Multiplication and addition of two points by integers:
- *                  R = m * P + n * Q
- *                  (Not thread-safe to use same group in multiple threads)
+ * \brief           This function performs multiplication and addition of two
+ *                  points by integers: \p R = \p m * \p P + \p n * \p Q
  *
- * \note            In contrast to mbedtls_ecp_mul(), this function does not guarantee
- *                  a constant execution flow and timing.
+ *                  It is not thread-safe to use same group in multiple threads.
  *
- * \param grp       ECP group
- * \param R         Destination point
- * \param m         Integer by which to multiply P
- * \param P         Point to multiply by m
- * \param n         Integer by which to multiply Q
- * \param Q         Point to be multiplied by n
+ * \note            In contrast to mbedtls_ecp_mul(), this function does not
+ *                  guarantee a constant execution flow and timing.
  *
- * \return          0 if successful,
- *                  MBEDTLS_ERR_ECP_INVALID_KEY if m or n is not a valid privkey
- *                  or P or Q is not a valid pubkey,
- *                  MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
+ * \param grp       The ECP group.
+ * \param R         The destination point.
+ * \param m         The integer by which to multiply \p P.
+ * \param P         The point to multiply by \p m.
+ * \param n         The integer by which to multiply \p Q.
+ * \param Q         The point to be multiplied by \p n.
+ *
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_ECP_INVALID_KEY if \p m or \p n are not
+ *                  valid private keys, or \p P or \p Q are not valid public
+ *                  keys.
+ * \return          #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
  */
 int mbedtls_ecp_muladd( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
              const mbedtls_mpi *m, const mbedtls_ecp_point *P,
              const mbedtls_mpi *n, const mbedtls_ecp_point *Q );
 
 /**
- * \brief           Check that a point is a valid public key on this curve
+ * \brief           This function checks that a point is a valid public key
+ *                  on this curve.
  *
- * \param grp       Curve/group the point should belong to
- * \param pt        Point to check
+ *                  It only checks that the point is non-zero, has
+ *                  valid coordinates and lies on the curve. It does not verify
+ *                  that it is indeed a multiple of \p G. This additional
+ *                  check is computationally more expensive, is not required
+ *                  by standards, and should not be necessary if the group
+ *                  used has a small cofactor. In particular, it is useless for
+ *                  the NIST groups which all have a cofactor of 1.
  *
- * \return          0 if point is a valid public key,
- *                  MBEDTLS_ERR_ECP_INVALID_KEY otherwise.
+ * \note            This function uses bare components rather than an
+ *                  ::mbedtls_ecp_keypair structure, to ease use with other
+ *                  structures, such as ::mbedtls_ecdh_context or
+ *                  ::mbedtls_ecdsa_context.
  *
- * \note            This function only checks the point is non-zero, has valid
- *                  coordinates and lies on the curve, but not that it is
- *                  indeed a multiple of G. This is additional check is more
- *                  expensive, isn't required by standards, and shouldn't be
- *                  necessary if the group used has a small cofactor. In
- *                  particular, it is useless for the NIST groups which all
- *                  have a cofactor of 1.
+ * \param grp       The curve the point should lie on.
+ * \param pt        The point to check.
  *
- * \note            Uses bare components rather than an mbedtls_ecp_keypair structure
- *                  in order to ease use with other structures such as
- *                  mbedtls_ecdh_context of mbedtls_ecdsa_context.
+ * \return          \c 0 if the point is a valid public key.
+ * \return          #MBEDTLS_ERR_ECP_INVALID_KEY on failure.
  */
 int mbedtls_ecp_check_pubkey( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *pt );
 
 /**
- * \brief           Check that an mbedtls_mpi is a valid private key for this curve
+ * \brief           This function checks that an \p mbedtls_mpi is a valid private
+ *                  key for this curve.
  *
- * \param grp       Group used
- * \param d         Integer to check
+ * \note            This function uses bare components rather than an
+ *                  ::mbedtls_ecp_keypair structure to ease use with other
+ *                  structures, such as ::mbedtls_ecdh_context or
+ *                  ::mbedtls_ecdsa_context.
  *
- * \return          0 if point is a valid private key,
- *                  MBEDTLS_ERR_ECP_INVALID_KEY otherwise.
+ * \param grp       The group used.
+ * \param d         The integer to check.
  *
- * \note            Uses bare components rather than an mbedtls_ecp_keypair structure
- *                  in order to ease use with other structures such as
- *                  mbedtls_ecdh_context of mbedtls_ecdsa_context.
+ * \return          \c 0 if the point is a valid private key.
+ * \return          #MBEDTLS_ERR_ECP_INVALID_KEY on failure.
  */
 int mbedtls_ecp_check_privkey( const mbedtls_ecp_group *grp, const mbedtls_mpi *d );
 
 /**
- * \brief           Generate a keypair with configurable base point
+ * \brief           This function generates a keypair with a configurable base
+ *                  point.
  *
- * \param grp       ECP group
- * \param G         Chosen base point
- * \param d         Destination MPI (secret part)
- * \param Q         Destination point (public part)
- * \param f_rng     RNG function
- * \param p_rng     RNG parameter
+ * \note            This function uses bare components rather than an
+ *                  ::mbedtls_ecp_keypair structure to ease use with other
+ *                  structures, such as ::mbedtls_ecdh_context or
+ *                  ::mbedtls_ecdsa_context.
  *
- * \return          0 if successful,
- *                  or a MBEDTLS_ERR_ECP_XXX or MBEDTLS_MPI_XXX error code
+ * \param grp       The ECP group.
+ * \param G         The chosen base point.
+ * \param d         The destination MPI (secret part).
+ * \param Q         The destination point (public part).
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG context.
  *
- * \note            Uses bare components rather than an mbedtls_ecp_keypair structure
- *                  in order to ease use with other structures such as
- *                  mbedtls_ecdh_context of mbedtls_ecdsa_context.
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
+ *                  on failure.
  */
 int mbedtls_ecp_gen_keypair_base( mbedtls_ecp_group *grp,
                      const mbedtls_ecp_point *G,
@@ -624,57 +692,66 @@
                      void *p_rng );
 
 /**
- * \brief           Generate a keypair
+ * \brief           This function generates an ECP keypair.
  *
- * \param grp       ECP group
- * \param d         Destination MPI (secret part)
- * \param Q         Destination point (public part)
- * \param f_rng     RNG function
- * \param p_rng     RNG parameter
+ * \note            This function uses bare components rather than an
+ *                  ::mbedtls_ecp_keypair structure to ease use with other
+ *                  structures, such as ::mbedtls_ecdh_context or
+ *                  ::mbedtls_ecdsa_context.
  *
- * \return          0 if successful,
- *                  or a MBEDTLS_ERR_ECP_XXX or MBEDTLS_MPI_XXX error code
+ * \param grp       The ECP group.
+ * \param d         The destination MPI (secret part).
+ * \param Q         The destination point (public part).
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG context.
  *
- * \note            Uses bare components rather than an mbedtls_ecp_keypair structure
- *                  in order to ease use with other structures such as
- *                  mbedtls_ecdh_context of mbedtls_ecdsa_context.
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
+ *                  on failure.
  */
 int mbedtls_ecp_gen_keypair( mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q,
                      int (*f_rng)(void *, unsigned char *, size_t),
                      void *p_rng );
 
 /**
- * \brief           Generate a keypair
+ * \brief           This function generates an ECP key.
  *
- * \param grp_id    ECP group identifier
- * \param key       Destination keypair
- * \param f_rng     RNG function
- * \param p_rng     RNG parameter
+ * \param grp_id    The ECP group identifier.
+ * \param key       The destination key.
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG context.
  *
- * \return          0 if successful,
- *                  or a MBEDTLS_ERR_ECP_XXX or MBEDTLS_MPI_XXX error code
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
+ *                  on failure.
  */
 int mbedtls_ecp_gen_key( mbedtls_ecp_group_id grp_id, mbedtls_ecp_keypair *key,
                 int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
 
 /**
- * \brief           Check a public-private key pair
+ * \brief           This function checks that the keypair objects
+ *                  \p pub and \p prv have the same group and the
+ *                  same public point, and that the private key in
+ *                  \p prv is consistent with the public key.
  *
- * \param pub       Keypair structure holding a public key
- * \param prv       Keypair structure holding a private (plus public) key
+ * \param pub       The keypair structure holding the public key.
+ *                  If it contains a private key, that part is ignored.
+ * \param prv       The keypair structure holding the full keypair.
  *
- * \return          0 if successful (keys are valid and match), or
- *                  MBEDTLS_ERR_ECP_BAD_INPUT_DATA, or
- *                  a MBEDTLS_ERR_ECP_XXX or MBEDTLS_ERR_MPI_XXX code.
+ * \return          \c 0 on success, meaning that the keys are valid and match.
+ * \return          #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the keys are invalid or do not match.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX or an \c MBEDTLS_ERR_MPI_XXX
+ *                  error code on calculation failure.
  */
 int mbedtls_ecp_check_pub_priv( const mbedtls_ecp_keypair *pub, const mbedtls_ecp_keypair *prv );
 
 #if defined(MBEDTLS_SELF_TEST)
 
 /**
- * \brief          Checkup routine
+ * \brief          The ECP checkup routine.
  *
- * \return         0 if successful, or 1 if a test failed
+ * \return         \c 0 on success.
+ * \return         \c 1 on failure.
  */
 int mbedtls_ecp_self_test( int verbose );
 
diff --git a/include/mbedtls/gcm.h b/include/mbedtls/gcm.h
index c2965e9..3c22033 100644
--- a/include/mbedtls/gcm.h
+++ b/include/mbedtls/gcm.h
@@ -1,9 +1,11 @@
 /**
  * \file gcm.h
  *
- * \brief Galois/Counter Mode (GCM) for 128-bit block ciphers, as defined
- *        in <em>D. McGrew, J. Viega, The Galois/Counter Mode of Operation
- *        (GCM), Natl. Inst. Stand. Technol.</em>
+ * \brief This file contains GCM definitions and functions.
+ *
+ * The Galois/Counter Mode (GCM) for 128-bit block ciphers is defined
+ * in <em>D. McGrew, J. Viega, The Galois/Counter Mode of Operation
+ * (GCM), Natl. Inst. Stand. Technol.</em>
  *
  * For more information on GCM, see <em>NIST SP 800-38D: Recommendation for
  * Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC</em>.
@@ -95,7 +97,8 @@
  *                  <li>192 bits</li>
  *                  <li>256 bits</li></ul>
  *
- * \return          \c 0 on success, or a cipher specific error code.
+ * \return          \c 0 on success.
+ * \return          A cipher-specific error code on failure.
  */
 int mbedtls_gcm_setkey( mbedtls_gcm_context *ctx,
                         mbedtls_cipher_id_t cipher,
@@ -105,15 +108,16 @@
 /**
  * \brief           This function performs GCM encryption or decryption of a buffer.
  *
- * \note For encryption, the output buffer can be the same as the input buffer.
- *       For decryption, the output buffer cannot be the same as input buffer.
- *       If the buffers overlap, the output buffer must trail at least 8 Bytes
- *       behind the input buffer.
+ * \note            For encryption, the output buffer can be the same as the
+ *                  input buffer. For decryption, the output buffer cannot be
+ *                  the same as input buffer. If the buffers overlap, the output
+ *                  buffer must trail at least 8 Bytes behind the input buffer.
  *
  * \param ctx       The GCM context to use for encryption or decryption.
  * \param mode      The operation to perform: #MBEDTLS_GCM_ENCRYPT or
  *                  #MBEDTLS_GCM_DECRYPT.
- * \param length    The length of the input data. This must be a multiple of 16 except in the last call before mbedtls_gcm_finish().
+ * \param length    The length of the input data. This must be a multiple of 
+ *                  16 except in the last call before mbedtls_gcm_finish().
  * \param iv        The initialization vector.
  * \param iv_len    The length of the IV.
  * \param add       The buffer holding the additional data.
@@ -141,12 +145,13 @@
  * \brief           This function performs a GCM authenticated decryption of a
  *                  buffer.
  *
- * \note For decryption, the output buffer cannot be the same as input buffer.
- *       If the buffers overlap, the output buffer must trail at least 8 Bytes
- *       behind the input buffer.
+ * \note            For decryption, the output buffer cannot be the same as
+ *                  input buffer. If the buffers overlap, the output buffer
+ *                  must trail at least 8 Bytes behind the input buffer.
  *
  * \param ctx       The GCM context.
- * \param length    The length of the input data. This must be a multiple of 16 except in the last call before mbedtls_gcm_finish().
+ * \param length    The length of the input data. This must be a multiple
+ *                  of 16 except in the last call before mbedtls_gcm_finish().
  * \param iv        The initialization vector.
  * \param iv_len    The length of the IV.
  * \param add       The buffer holding the additional data.
@@ -156,8 +161,8 @@
  * \param input     The buffer holding the input data.
  * \param output    The buffer for holding the output data.
  *
- * \return         0 if successful and authenticated, or
- *                 #MBEDTLS_ERR_GCM_AUTH_FAILED if tag does not match.
+ * \return         0 if successful and authenticated.
+ * \return         #MBEDTLS_ERR_GCM_AUTH_FAILED if the tag does not match.
  */
 int mbedtls_gcm_auth_decrypt( mbedtls_gcm_context *ctx,
                       size_t length,
@@ -179,10 +184,12 @@
  *                  #MBEDTLS_GCM_DECRYPT.
  * \param iv        The initialization vector.
  * \param iv_len    The length of the IV.
- * \param add       The buffer holding the additional data, or NULL if \p add_len is 0.
- * \param add_len   The length of the additional data. If 0, \p  add is NULL.
+ * \param add       The buffer holding the additional data, or NULL
+ *                  if \p add_len is 0.
+ * \param add_len   The length of the additional data. If 0,
+ *                  \p add is NULL.
  *
- * \return         \c 0 on success.
+ * \return          \c 0 on success.
  */
 int mbedtls_gcm_starts( mbedtls_gcm_context *ctx,
                 int mode,
@@ -199,16 +206,18 @@
  *                  Bytes. Only the last call before calling
  *                  mbedtls_gcm_finish() can be less than 16 Bytes.
  *
- * \note For decryption, the output buffer cannot be the same as input buffer.
- *       If the buffers overlap, the output buffer must trail at least 8 Bytes
- *       behind the input buffer.
+ * \note            For decryption, the output buffer cannot be the same as
+ *                  input buffer. If the buffers overlap, the output buffer
+ *                  must trail at least 8 Bytes behind the input buffer.
  *
  * \param ctx       The GCM context.
- * \param length    The length of the input data. This must be a multiple of 16 except in the last call before mbedtls_gcm_finish().
+ * \param length    The length of the input data. This must be a multiple of
+ *                  16 except in the last call before mbedtls_gcm_finish().
  * \param input     The buffer holding the input data.
  * \param output    The buffer for holding the output data.
  *
- * \return         \c 0 on success, or #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
+ * \return         \c 0 on success.
+ * \return         #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
  */
 int mbedtls_gcm_update( mbedtls_gcm_context *ctx,
                 size_t length,
@@ -226,7 +235,8 @@
  * \param tag       The buffer for holding the tag.
  * \param tag_len   The length of the tag to generate. Must be at least four.
  *
- * \return          \c 0 on success, or #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
  */
 int mbedtls_gcm_finish( mbedtls_gcm_context *ctx,
                 unsigned char *tag,
@@ -243,7 +253,8 @@
 /**
  * \brief          The GCM checkup routine.
  *
- * \return         \c 0 on success, or \c 1 on failure.
+ * \return         \c 0 on success.
+ * \return         \c 1 on failure.
  */
 int mbedtls_gcm_self_test( int verbose );